11.0.0

The Switch 11.0.0 system update was released on December 1, 2020 (UTC). This Switch update was released for the following regions: ALL, and CHN.

Security flaws fixed: <fill this in manually later, see the updatedetails page from the ninupdates-report page(s) once available for now>.

Change-log

Official ALL change-log:

• Nintendo Switch Online was added to the HOME Menu.
• Access all Nintendo Switch Online services, from getting the latest information to checking your membership status.
• *This feature is not available in some countries/regions.
• A new feature that automatically downloads backed up save data was added to the Save Data Cloud.
• When using software with the same Nintendo Account linked to multiple systems, save data backed up from one console will automatically be downloaded to your other system(s).
• *To use this feature, it must be enabled under System Settings > Data Management > Save Data Cloud.
• *Save data will not be downloaded automatically unless save data for that software exists on the console. The first time only, users must download the save data manually.
• *A Nintendo Switch Online membership is required to use the Save Data Cloud service.
• A new Trending feature was added to the User Page.
• Users can check what software their friends are playing or have started playing recently.
• Information will not be displayed for friends who have their online status set to display to no one.
• Users can now transfer screenshots and videos from Album to their smart devices.
• Users can wirelessly connect their smart devices to Nintendo Switch to transfer the screenshots and videos saved within their Album.
• For screenshots, users can transfer a maximum of 10 screenshots and 1 video capture at once.
• *To connect, users must use their smart device to scan the QR Code displayed on the Nintendo Switch screen.
• For more information, please refer to the Nintendo Support website.
• *“QR Code” is a registered trademark of DENSO WAVE INCORPORATED.
• A new Copy to a Computer via USB Connection feature was added under System Settings > Data Management > Manage Screenshots and Videos.
• Users can use a USB cable to connect Nintendo Switch to their computers to copy the screenshots and videos saved under Album.
• * A USB charging cable [model HAC-010] or a USB-IF certified USB cable that supports data transfer is required to connect to a computer.
• For more information, please refer to the Nintendo Support website.
• * Connection via the Nintendo Switch dock is not supported. Please connect the Nintendo Switch system directly to the computer.
• Users can now select what download to prioritize when there are multiple downloads in progress.
• When there are multiple software, update data, or downloadable content downloads in progress, users can now select which they want to download first.
• You can set this under Download Options by selecting the icon for the software you want to download first on the HOME Menu.
• User icons were added.
• 12 user icons that commemorate the 35th anniversary of the Super Mario Bros. series were added.
• Users can now name preset button mappings with the Change Button Mapping feature.
• Brazilian Portuguese was added as a supported language.
• When users set their region to the Americas and their language to Português, the language used on the HOME Menu and in certain software will be displayed in Brazilian Portuguese.
• Several issues were fixed, and usability and stability were improved.

BootImagePackage

All files in RomFS were updated.

Secure Monitor

Secure Monitor was updated.

• The firmware revision magic was changed from 0x1AD to 0x1CE.
• Support was added for an additional DRAM model.

Warmboot

• The firmware revision magic was changed from 0x1AD to 0x1CE.

Kernel

• Kernel is now built with -Os instead of -O3
  • Many functions are no longer inlined.
• crt0 deprivileging code now sets hypervisor EL2 registers.
• Logic for flushing entire data cache and invalidating entire TLB during init is now a function called by JumpFromEL2ToEL1 and DisableMmuICacheAndDCache instead of being duplicated.
• Initialize0 has had several things re-ordered/shuffled:
  • InsertDevicePhysicalMemoryBlocks is now called immediately after the KernelCode region is inserted.
  • "Needed device virtual space" is now calculated as 3 * (0x18000 + { sum of KernelAutoMap physical device regions } + GetUnknownDebugDeviceRegionSize()
  • KernelMisc region size is now util::AlignUp(std::max(needed_device_virtual_space, 32_MB), 2_MB).
  • Code for mapping the unknown debug address as UnknownDebug is no longer present.
  • Slab region is now memset to zero after the linear region is mapped instead of before.
  • Ranges are now more uniform; value in [range address / 2_MB, last_address / 2_MB] is generated and multipled by 2 MB instead of aligning down result.
• KMemoryRegion now has a "last_address" member replacing its "size" member.
  • GetSize() now calculated as (last_address - address + 1)
• KMemoryRegionTree::Insert now takes in last address instead of size.
  • Several callsites now verify that last_address != 0xFFFF...
• KMemoryRegionAllocator now uses a slabheap of count 200 instead of 1000.
• "Virtual" cores now supported, KThread now stores core ID/affinity for both virtual and physical.
• New SVC 0x37 "GetResourceLimitPeakValue"
  • Returns the highest value that a resource limit's current has ever achieved.
  • KResourceLimit now stores an array of peak values to enable this
• Two new kernel objects, KAlpha and KBeta (placeholder names, true object names are unknown and cannot be guessed without observing purpose).
  • KAlpha has size 0x50, KBeta has size 0x88
  • KObjectAllocators for KAlpha/KBeta receive counts 1, 6.
  • KProcess has a list of KBeta, intrusive list node is at KBeta + 0x68.
• Four new SVCs, ID 0x39, 0x3A, 0x46, 0x47
  • These are likely for interacting with KAlpha and KBeta, but on NX they are (presumably) if-def'd to be "return svc::ResultNotImplemented()"
• KThread had all of its members reordered and its unused members deleted
• Most KThread waits now use KThreadWaiterListIntrusiveNode instead of KThreadQueue
• KConditionVariable no longer uses global threads for the call to .nfind()
• KCoreLocalRegion deleted, replaced with pointer-to-current-thread
  • TPIDR_EL1 != X18 now, and TPIDR_EL1 now always points to the exception thread stack.
• KSynchronization was deleted, replaced with namespaced or static-on-ksynchronization-object functions
• KSynchronizationObject now contains a pointer to thread queue, instead of an inline list
• KInterruptEvent no longer has an InterruptEventTask member
• KInterruptEventTask::Reset no longer calls KInterruptManager::ClearInterrupt, instead it calls a new function which returns a result
• KInterruptEventTask now has a KLightLock member
• KHardwareTimer is now an interrupt task again
• KHardwareTimer now has a new member "maximum_time", set to std::numeric_limits<s64>::value().
  • Tasks will only be added to the task list if their time is <= maximum_time, this is in addition to the >= 1 checks previously.
• KIntrusiveRedBlackTreeNode now has common member functions instead of templated, size is now packed to 0x1C instead of 0x20.
  • All Insert/Remove/etc operations are common regardless of the type the node is intrusive in.
• KDebugLogImpl::Initialize() now assumes uart has been configured for logging by the secure monitor, and does not perform tegra uart init sequence
• vsprintf, KDebugString::PutString are now fully inlined inside KVPrintf.
• KObjectContainer::Insert now returns void instead of Result
  • Code which previously did R_TRY() now just calls.
• KPageHeapBitmapRng now has TinyMt as a data member, instead of directly implementing KPageHeap.
  • This affects how constructor is invoked.
• KMemoryBlock/KMemoryInfo now has extra members tracking u8 non_contig_bitflags, u16 ipc_non_contig_lock_count, u16 device_non_contig_lock_count
• KMemoryBlockManager Update now takes non-contig flags to determine where to coalesce (all coalescing must now happen forwards instead of either direction)
• KMemoryBlockManagerUpdateAllocator no longer has a result member, instead it has ->Initialize() which takes in a number of blocks to allocate
• KMemoryManager::Allocate, KMemoryManager::AllocatePageGroup, KMemoryManager::AllocatePageGroupForProcess, now call KPageGroup::Open on the returned page group.
  • All callsites for these functions no longer call open after allocating.
• KMemoryManager::Open is now KMemoryManager::OpenAdditionalReference, now checks that refcount is >= 1 instead of >= 0
• KPageTableBase now has an additional data member "disable_device_address_space_merge"
  • KProcessPageTable::Initialize now takes in (process flags & 0x1000) as a bool argument to set this.
• Page table Query operations now return a number of blocks required to support the above when relevant
• KPageTable now uses 4 sw-reserved bits instead of 1
  • Former bit 0x01.... ("Is Mapped") is now bit 0x40..... (PTE bit 58)
  • PTE bit 55 "contiguous not allowed" was reworked for significantly more fine-grained control
    • PTE bit 55 is now "start of block non-contiguous", coalescing cannot occur if the first block in a coalesce has this block set.
    • PTE bit 56 is now "not-end-of-block non-contiguous", coalescing cannot occur if a block other than the last in a coalesce has this bit set
    • PTE bit 57 is now "end of block non-contiguous", coalescing cannot occur if the last block in a coalesce has this bit set
    • The old non-contiguous semantics are equivalent to 56 + 57 together.
  • These bits are now returned by KPageTableImpl::Traverse
  • Upper byte of KPageProperties is now bitflags to control management of these bits.
  • Bit 0x1 = "Set/Clear PTE Bit55"
  • Bit 0x2 = "Set PTE Bit56"
  • Bit 0x4 = "Clear PTE Bit56"
  • Bit 0x8 = "Set PTE Bit57"
  • Bit 0x10 = "Clear PTE Bit57"
  • Bit 0x20 = Force-Clear 56+57 + attempt to merge
• KMemoryBlockManager/KPageTable now prevent coalescing of blocks which are reprotected --- (for transfer memory, ipc, ...)
• They also do not coalesce adjacent GPU mappings that were mapped separately.
• They removed the 0x80 "AnyLocked" bit from KMemoryAttribute
• KMemoryBlock/KMemoryInfo now have additional u16 "device_non_coalesce_right_count".
  • Like device_non_coalesce_left_count from previous 11.x, this now prevents merging with block to the right if set.
• KMemoryBlock::Add now takes in the memory block to the right instead of the size of the block to the right.
  • This facilitates combining flags for the newly coalesced blocks.
• KPageTableBase::SetProcessMemoryPermission no longer sets non-coalesce bit 24.
• KDeviceAddressSpace::Map/KDeviceAddressSpace::Unmap now call new KPageTableBase function to update non-coalesce state according to partial map state.
• KDevicePageTable::UnmapImpl now invalidates TlbGroup in the failure case of adding to the page group.
• KPageTableBase::MakeAndOpenContiguousPageGroup is now KPageTableBase::MakePageGroupForDeviceAddressSpace, and now prevents coalescing until call completion.
  • non_coalesce_mask 0x10 is used for this.
• KPageTableBase::UnmapCodeMemory no longer requires the whole range have the same state.
  • It now invalidates instruction cache if any pages are code.
• KPageTable::UnknownVirtualFunction10 now takes in more arguments: _QWORD (address probably), _QWORD (size probably), two bools, _QWORD (address2 probably), _QWORD (size2 probably), void * (probably KAlpha * or KBeta *)
  • Returns whether a comparison between address_probably and address_2_probably holds depending on flags at pointer + 0x10.
• KMemoryState_Io now goes to the alias code region in GetRegionAddress/Size (weird, seems like incorrect behavior)
  • Also very weird: KPageTableBase::MapIo maps IO into the kernel map region, but KPageTableBase::QueryMapping panics if it is not in the alias code region.
  • This "probably" causes kernel panic if mapping IO into process with 32-bit-no-alias address space type?

FIRM Sysmodules

FIRM sysmodules were updated. Specific diffs available below: <check back for more diffs later>

System Titles

• All titles were updated, except for the following (minus stubbed titles): SharedFont, Dictionary, UrlBlackList, LibraryAppletMiiEdit.
• The previously stubbed 010000000000001B sysmodule was replaced with capmtp.

The following sysmodules had IPC changes: usb, settings, bcat, ptm, bsdsockets, hid, audio, wlan, account, ns, psc, am, nim, vi, pctl, glue, es, sdb, olsc, pgl, fs, loader, sm, capsrv.

NPDM changes (see Services_API for service-hosting changes):

• All updated NPDMs now have Flags bit5 set.
• ptm: Access to hshl:set and ins:r were added.
• ptm/hid: Various services were re-ordered in the Service Access Control.
• wlan now has access to csrng.
• ldn now has access to pl:u.
• pcv now has access to hshl:set.
• account now has access to ectx:w.
• ns now has access to pl:u.
• am: Access to the following was added: arp:r, aud:a, aud:d. Access to the following was removed: audin:a, audin:d, audout:a, audout:d, audren:a, audren:d. Access to hshl:set/hshl:sys was added.
• erpt: Access to svcGetResourceLimitLimitValue and svc 0x37 were added. Access to ectx:r was added.
• vi: The Handle Table Size was changed from 160 to 192. Access to the following services were added: erpt:c, gpio, i2c, lm, psc:m, pwm.
• glue now has access to hshl:sys, and access to psm was removed.
• creport now has access to fsp-srv.
• sdb now has access to bcat:s and pm:info.
• migration now has access to prepo:u.
• qlaunch now has access to capmtp.
• LibraryAppletController now has access to ngct:u.
• LibraryAppletPlayerSelect now has access to olsc:s.
• LibraryAppletPhotoViewer: Access to bsd:u was replaced with bsd:s. Access to lp2p:sys was added. Access to ns:am2 was replaced with ns:ro. FS permission bit0 is now clear, MountContent* is no longer accessible.
• LibraryAppletLoginShare now has access to ns:web.

RomFs changes:

• CertStore was updated.
• ErrorMessage: New errors were added / localization changes.
• BrowserDll: The following was updated: "/browser/ErrorPageFilteringTemplate.html", "/browser/MediaControls.css", "/browser/MediaControls.js", "/browser/RootCaEtc.pem", "/browser/RootCaSdkAdditional.pem", "/buildinfo/buildinfo.dat". The following was added: "/browser/MediaControlsInline.css", "/browser/MediaControlsInline.js".
  • "/dll_0" and "/dll_1" were moved into "/nro/netfront/dll_{0/1}".
  • "/lyt/Lhub.arc" was added.
  • "/message/USpt/" was added.
• Help:
  • "/legallines.htdocs/index.html" updated
  • "/safe.htdocs/html/USpt/" added
  • "/safe.htdocs/img/recyclenintendo.jpg" updated
  • "/safe.htdocs/js/tapaction.js" updated
• NgWord: updated
• AvatarImage: More icons added.
• LocalNews: Added "/message/revision.txt" and "/message/USpt/".
• Eula:
  • "/revision.txt" updated
  • Updated "/EUru/Eula.msbt.szs", "/JPja/Eula.msbt.szs".
  • Added "/USpt/".
• TimeZoneBinary: TZ info updated.
• FontNintendoExtension: "/nintendo_ext_003.bfttf" and "/nintendo_ext2_003.bfttf" were updated.
• FirmwareDebugSettings: updated
• FatalMessage: Updated "/pt-BR/GeneralMessage" and "/pt-BR/QuestMessage" were updated.
• ControllerIcon: "/lyt/ColorTable" updated
• PlatformConfigIcosa/PlatformConfigCopper/PlatformConfigHoag/PlatformConfigIcosaMariko: updated
• ControllerFirmware: "/TouchScreenFirmwareInfo.csv" updated
• NgWord2: updated
• FunctionBlackList:
  • "/blacklist.dat" was replaced with "/blacklist.json".
• NgWordT: updated
• Applets: Various UI/graphics/sound/localization changes.
• Web-applets: "/buildinfo/buildinfo.dat" was updated, and "/.nrr/netfront.nrr" was renamed to "/.nrr/dll.nrr".
• LibraryAppletPhotoViewer: In addition to the above, "/http/" was added, which contains the following:
  • "index.html"
  • "js/index.js"
  • "styles/index.css"

creport-sysmodule

• creport now has access to fsp-srv, this is used to retrieve debugging information that is now attached to error reports. The following functions are called (with output/info attached to erpts):
  • GetSdCardSpeedMode
  • GetSdCardCid
  • GetSdCardUserAreaSize
  • GetSdCardProtectedAreaSize
  • GetAndClearSdCardErrorInfo
  • IsGameCardInserted
  • GetGameCardCid
  • GetGameCardErrorReportInfo
  • GetGameCardDeviceId
  • GetMmcSpeedMode
  • GetMmcCid
  • GetMmcPatrolCount
  • GetAndClearMmcErrorInfo
  • GetMmcExtendedCsd
  • GetAndClearMemoryReportInfo
  • GetAndClearFileSystemProxyErrorInfo

See Also

System update report(s):

• [1]