Applet Manager services

AM (Applet Manager) provides services for interacting with system applets while abstracting several aspects of power and operation management.

Contains multiple raw images, with at least the following: "NN_OMM_CHARGING_BIN_{begin|end}"(charging icon), low-battery icon, and the Nintendo Switch logo displayed during system boot.

appletAE

This is "nn::am::service::IAllSystemAppletProxiesService".

Cmd	Name	Notes
100	OpenSystemAppletProxy	Returns an #ISystemAppletProxy.
200	OpenLibraryAppletProxyOld ([1.0.0-2.3.0] OpenLibraryAppletProxy)	Returns an #ILibraryAppletProxy.
201	[3.0.0+] #OpenLibraryAppletProxy	Returns an #ILibraryAppletProxy.
300	OpenOverlayAppletProxy	Returns an #IOverlayAppletProxy.
350	OpenSystemApplicationProxy	Returns an #IApplicationProxy.
400	#CreateSelfLibraryAppletCreatorForDevelop
410	[6.0.0+] #GetSystemAppletControllerForDebug
1000	[6.0.0+] #GetDebugFunctions

All of these Open*Proxy commands except #OpenLibraryAppletProxy take the same input as #OpenApplicationProxy, with the same user-process retry-loop as #OpenApplicationProxy. These Open*Proxy commands (including appletOE) doesn't seem to usable from processes which aren't actual applets (such as sysmodules), at least for applet-types which aren't already in use.

This service is used by all system non-regular-applications.

The 01000000000010XX system titles use the following applet types(above Open{type}Proxy commands):

• "qlaunch": SystemApplet
• "overlay": OverlayApplet
• "starter": SystemApplication
• "maintenance": SystemApplet
• All others: LibraryApplet

OpenLibraryAppletProxy

Returns an #ILibraryAppletProxy.

Takes a reserved input u64(official user-processes use hard-coded value 0), a PID,a process copy-handle(cur-proc handle alias), and an 0x80-byte type-0x15 input buffer AppletAttribute.

Official user-processes use the same retry loop with this as the other Open*Proxy commands.

CreateSelfLibraryAppletCreatorForDevelop

Takes a PID and an input u64 pid_placeholder, returns an #ILibraryAppletCreator.

The cached value loaded from Settings_services#GetDebugModeFlag must be 1, otherwise an error is returned.

The cached value loaded from system-setting am.debug!dev_function must be set to 0x1 with size 0x1, otherwise an error is returned.

GetSystemAppletControllerForDebug

No input, returns an #ISystemAppletControllerForDebug.

The cached value loaded from system-setting am.debug!dev_function must be set to 0x1 with size 0x1, and various state checks must pass, otherwise 0 is returned with no output interface.

GetDebugFunctions

No input, returns an #IDebugFunctions.

The cached value loaded from system-setting am.debug!dev_function must be set to 0x1 with size 0x1, otherwise 0 is returned with no output interface.

ISystemAppletProxy

Cmd	Name	Notes
0	GetCommonStateGetter	Returns an #ICommonStateGetter.
1	GetSelfController	Returns an #ISelfController.
2	GetWindowController	Returns an #IWindowController.
3	GetAudioController	Returns an #IAudioController.
4	GetDisplayController	Returns an #IDisplayController.
10	GetProcessWindingController	Returns an #IProcessWindingController.
11	GetLibraryAppletCreator	Returns an #ILibraryAppletCreator.
20	GetHomeMenuFunctions	Returns an #IHomeMenuFunctions.
21	GetGlobalStateController	Returns an #IGlobalStateController.
22	GetApplicationCreator	Returns an #IApplicationCreator.
23	[7.0.0+] GetAppletCommonFunctions	Returns an #IAppletCommonFunctions.
1000	GetDebugFunctions	Returns an #IDebugFunctions.

IHomeMenuFunctions

Cmd	Name	Notes
10	RequestToGetForeground
11	LockForeground
12	UnlockForeground
20	#PopFromGeneralChannel
21	#GetPopFromGeneralChannelEvent
30	#GetHomeButtonWriterLockAccessor
31	[2.0.0+] #GetWriterLockAccessorEx
100	[6.0.0+] PopRequestLaunchApplicationForDebug
200	[8.0.0+] #LaunchDevMenu

PopFromGeneralChannel

No input, returns an output #IStorage.

GetPopFromGeneralChannelEvent

No input, returns an output handle.

GetHomeButtonWriterLockAccessor

No input, returns an output #ILockAccessor.

GetWriterLockAccessorEx

Takes an input u32, returns an output #ILockAccessor.

LaunchDevMenu

No input/output.

Uses NS_Services#IApplicationManagerInterface cmd99.

ILockAccessor

Cmd	Name
1	TryLock
2	Unlock
3	#GetEvent

GetEvent

No input, returns an output handle.

IGlobalStateController

Cmd	Name	Notes
0	RequestToEnterSleep
1	EnterSleep
2	StartSleepSequence
3	StartShutdownSequence
4	StartRebootSequence
9	[7.0.0+] #IsAutoPowerDownRequested
10	LoadAndApplyIdlePolicySettings
11	[2.0.0+] NotifyCecSettingsChanged
12	[3.0.0+] SetDefaultHomeButtonLongPressTime
13	[3.0.0+] UpdateDefaultDisplayResolution
14	[3.0.0+] #ShouldSleepOnBoot
15	[4.0.0+] GetHdcpAuthenticationFailedEvent

IsAutoPowerDownRequested

No input, returns an output u8 bool.

ShouldSleepOnBoot

No input, returns an output u8 bool.

IApplicationCreator

Cmd	Name	Notes
0	#CreateApplication
1	#PopLaunchRequestedApplication
10	#CreateSystemApplication
100	#PopFloatingApplicationForDevelopment

CreateApplication

Takes an input u64 nn::ncm::ApplicationId(titleID), returns an #IApplicationAccessor.

PopLaunchRequestedApplication

No input, returns an #IApplicationAccessor.

CreateSystemApplication

Takes an input u64 nn::ncm::SystemApplicationId, returns an #IApplicationAccessor.

PopFloatingApplicationForDevelopment

No input, returns an #IApplicationAccessor.

IApplicationAccessor

Cmd	Name	Notes
0	#GetAppletStateChangedEvent
1	#IsCompleted
10	Start
20	RequestExit
25	Terminate
30	GetResult
101	RequestForApplicationToGetForeground
110	TerminateAllLibraryApplets
111	AreAnyLibraryAppletsLeft
112	#GetCurrentLibraryApplet
120	GetApplicationId
121	#PushLaunchParameter
122	#GetApplicationControlProperty
123	[2.0.0+] GetApplicationLaunchProperty
124	[6.0.0+] GetApplicationLaunchRequestInfo
130	[6.0.0+] SetUsers
131	[6.0.0+] CheckRightsEnvironmentAvailable
132	[6.0.0+] GetNsRightsEnvironmentHandle
140	[6.0.0+] GetDesirableUids
150	[6.0.0+] ReportApplicationExitTimeout
160	[8.0.0+] #SetApplicationAttribute
170	[8.0.0+] HasSaveDataAccessPermission

Commands <=30 are inherited from #IAppletAccessor.

GetCurrentLibraryApplet

No input, returns an output #IAppletAccessor.

PushLaunchParameter

Takes an input u32 #LaunchParameterKind and an input #IStorage, no output.

GetApplicationControlProperty

No input, takes a type-0x6 output buffer.

This gets the application control.nacp.

SetApplicationAttribute

Takes a type-0x15 input buffer containing an #ApplicationAttribute, no output.

IAppletAccessor

Cmd	Name
0	#GetAppletStateChangedEvent
1	#IsCompleted
10	#Start
20	#RequestExit
25	#Terminate
30	#GetResult

GetAppletStateChangedEvent

No input, returns an output event handle with autoclear=false.

IsCompleted

No input, returns an output u8 bool.

Start

No input/output.

RequestExit

No input/output.

Terminate

No input/output.

GetResult

No input/output.

IAppletCommonFunctions

Added with 7.0.0.

Cmd	Name	Notes
10	ReadThemeStorage	Takes an input u64 offset and a type-0x22 output buffer, returns an output u64 actual_transfer_size.
11	WriteThemeStorage	Takes an input u64 offset and a type-0x21 input buffer, no output.
40	[8.0.0+] GetDisplayLogicalResolution
42	[8.0.0+] SetDisplayMagnification
50	[8.0.0+] SetHomeButtonDoubleClickEnabled
51	[8.0.0+] GetHomeButtonDoubleClickEnabled

ReadThemeStorage/WriteThemeStorage: these commands copy data from/to a state buffer and the user specified buffer. The size of the state buffer is 0x400-bytes.

ILibraryAppletProxy

Cmd	Name	Notes
0	GetCommonStateGetter	Returns an #ICommonStateGetter.
1	GetSelfController	Returns an #ISelfController.
2	GetWindowController	Returns an #IWindowController.
3	GetAudioController	Returns an #IAudioController.
4	GetDisplayController	Returns an #IDisplayController.
10	GetProcessWindingController	Returns an #IProcessWindingController.
11	GetLibraryAppletCreator	Returns an #ILibraryAppletCreator.
20	OpenLibraryAppletSelfAccessor	Returns an #ILibraryAppletSelfAccessor.
21	[7.0.0+] GetAppletCommonFunctions	No input, returns an #IAppletCommonFunctions.
1000	GetDebugFunctions	Returns an #IDebugFunctions.

ILibraryAppletSelfAccessor

Cmd	Name	Notes
0	#PopInData
1	#PushOutData
2	#PopInteractiveInData
3	#PushInteractiveOutData
5	#GetPopInDataEvent
6	#GetPopInteractiveInDataEvent
10	#ExitProcessAndReturn
11	#GetLibraryAppletInfo
12	GetMainAppletIdentityInfo
13	#CanUseApplicationCore
14	GetCallerAppletIdentityInfo
15	[2.0.0+] #GetMainAppletApplicationControlProperty
16	[2.0.0+] #GetMainAppletStorageId
17	[3.0.0+] GetCallerAppletIdentityInfoStack
18	[4.0.0+] GetNextReturnDestinationAppletIdentityInfo
19	[4.0.0+] GetDesirableKeyboardLayout
20	#PopExtraStorage
25	#GetPopExtraStorageEvent
30	#UnpopInData
31	#UnpopExtraStorage
40	[2.0.0+] GetIndirectLayerProducerHandle
50	[3.0.0+] ReportVisibleError
51	[4.0.0+] ReportVisibleErrorWithErrorContext
60	[4.0.0+] #GetMainAppletApplicationDesiredLanguage
70	[8.0.0+] GetCurrentApplicationId
80	[6.0.0+] RequestExitToSelf
90	[5.0.0+] CreateApplicationAndPushAndRequestToLaunch
100	[4.0.0+] #CreateGameMovieTrimmer
101	[5.0.0+] ReserveResourceForMovieOperation
102	[5.0.0+] UnreserveResourceForMovieOperation
110	[6.0.0+] GetMainAppletAvailableUsers

PopInData

No input, returns an output #IStorage.

PushOutData

Takes an input #IStorage, no output.

PopInteractiveInData

No input, returns an output #IStorage.

PushInteractiveOutData

Takes an input #IStorage, no output.

GetPopInDataEvent

No input, returns an output handle.

GetPopInteractiveInDataEvent

No input, returns an output handle.

GetMainAppletApplicationControlProperty

No input, takes a type-0x16 output buffer.

This gets the control.nacp.

GetMainAppletStorageId

No input, returns an output u8 storageId.

ExitProcessAndReturn

No input/output.

Exits the LibraryApplet and returns to running the title which launched this LibraryApplet (qlaunch for example).

GetLibraryAppletInfo

No input. Returns an output #LibraryAppletInfo.

CanUseApplicationCore

No input, returns an output u8 bool.

PopExtraStorage

No input, returns an output #IStorage.

GetPopExtraStorageEvent

No input, returns an output handle.

UnpopInData

Takes an input #IStorage, no output.

UnpopExtraStorage

Takes an input #IStorage, no output.

GetMainAppletApplicationDesiredLanguage

No input, returns an output LanguageCode.

CreateGameMovieTrimmer

Takes an input u64 and handle, returns a GRC IGameMovieTrimmer.

IOverlayAppletProxy

Cmd	Name	Notes
0	GetCommonStateGetter	Returns an #ICommonStateGetter.
1	GetSelfController	Returns an #ISelfController.
2	GetWindowController	Returns an #IWindowController.
3	GetAudioController	Returns an #IAudioController.
4	GetDisplayController	Returns an #IDisplayController.
10	GetProcessWindingController	Returns an #IProcessWindingController.
11	GetLibraryAppletCreator	Returns an #ILibraryAppletCreator.
20	GetOverlayFunctions	Returns an #IOverlayFunctions.
21	[7.0.0+] GetAppletCommonFunctions	No input, returns an #IAppletCommonFunctions.
1000	GetDebugFunctions	Returns an #IDebugFunctions.

IOverlayFunctions

Cmd	Name
0	BeginToWatchShortHomeButtonMessage
1	EndToWatchShortHomeButtonMessage
2	GetApplicationIdForLogo
3	SetGpuTimeSliceBoost
4	[2.0.0+] SetAutoSleepTimeAndDimmingTimeEnabled
5	[2.0.0+] TerminateApplicationAndSetReason
6	[3.0.0+] SetScreenShotPermissionGlobally
10	[6.0.0+] StartShutdownSequenceForOverlay
11	[6.0.0+] StartRebootSequenceForOverlay
20	[8.0.0+] SetHandlingHomeButtonShortPressedEnabled
90	[7.0.0+] SetRequiresGpuResourceUse
101	[5.0.0+] BeginToObserveHidInputForDevelop

SetRequiresGpuResourceUse

Takes an input u8, no output.

IApplicationProxy

Cmd	Name	Notes
0	GetCommonStateGetter	Returns an #ICommonStateGetter.
1	GetSelfController	Returns an #ISelfController.
2	GetWindowController	Returns an #IWindowController.
3	GetAudioController	Returns an #IAudioController.
4	GetDisplayController	Returns an #IDisplayController.
10	GetProcessWindingController	Returns an #IProcessWindingController.
11	GetLibraryAppletCreator	Returns an #ILibraryAppletCreator.
20	GetApplicationFunctions	Returns an #IApplicationFunctions.
1000	GetDebugFunctions	Returns an #IDebugFunctions.

IApplicationFunctions

Cmd	Name	Notes
1	#PopLaunchParameter
10	#CreateApplicationAndPushAndRequestToStart
11	[3.0.0+] #CreateApplicationAndPushAndRequestToStartForQuest
12	[4.0.0+] #CreateApplicationAndRequestToStart
13	[4.0.0+] #CreateApplicationAndRequestToStartForQuest
14	[7.0.0+] #CreateApplicationWithAttributeAndPushAndRequestToStartForQuest
15	[7.0.0+] #CreateApplicationWithAttributeAndRequestToStartForQuest
20	EnsureSaveData
21	#GetDesiredLanguage
22	#SetTerminateResult
23	#GetDisplayVersion
24	[2.0.0+] GetLaunchStorageInfoForDebug
25	[3.0.0+] ExtendSaveData
26	[3.0.0+] GetSaveDataSize
27	[5.0.0+] CreateCacheStorage
30	#BeginBlockingHomeButtonShortAndLongPressed
31	#EndBlockingHomeButtonShortAndLongPressed
32	#BeginBlockingHomeButton
33	#EndBlockingHomeButton
40	#NotifyRunning
50	[2.0.0+] #GetPseudoDeviceId
60	[2.0.0+] #SetMediaPlaybackStateForApplication
65	[3.0.0+] #IsGamePlayRecordingSupported
66	[3.0.0+] #InitializeGamePlayRecording
67	[3.0.0+] #SetGamePlayRecordingState
68	[4.0.0+] #RequestFlushGamePlayingMovieForDebug
70	[3.0.0+] #RequestToShutdown
71	[3.0.0+] #RequestToReboot
80	[4.0.0+] #ExitAndRequestToShowThanksMessage
90	[4.0.0+] #EnableApplicationCrashReport
100	[5.0.0+] #InitializeApplicationCopyrightFrameBuffer
101	[5.0.0+] #SetApplicationCopyrightImage
102	[5.0.0+] #SetApplicationCopyrightVisibility
110	[5.0.0+] #QueryApplicationPlayStatistics
111	[6.0.0+] #QueryApplicationPlayStatisticsByUid
120	[5.0.0+] #ExecuteProgram
121	[5.0.0+] #ClearUserChannel
122	[5.0.0+] #UnpopToUserChannel
123	[5.0.0+] #GetPreviousProgramIndex
124	[6.0.0+] #EnableApplicationAllThreadDumpOnCrash
130	[8.0.0+] #GetGpuErrorDetectedSystemEvent
500	[5.0.0+] StartContinuousRecordingFlushForDebug
1000	[5.0.0+] #CreateMovieMaker
1001	[5.0.0+] #PrepareForJit

The BOTW game uses this GamePlayRecording functionality from the main-nso "nninitStartup" function, with size 0x6000000(96MiB). The official GamePlayRecording-enable code does the following(this will panic on any failure):

• Creates TransferMemory using the input buffer and size, with permissions=0.
• Uses #InitializeGamePlayRecording with the TransferMemory.
• Closes the TransferMemory handle, + TransferMemory cleanup.
• Uses #SetGamePlayRecordingState with value 0x1.

This GamePlayRecording functionality presumably enables the video-recording usable starting with 4.0.0.

PopLaunchParameter

Takes an input u32 #LaunchParameterKind, returns an output #IStorage.

Pops a LaunchParameter #IStorage, the storage will be removed from sysmodule state during this.

CreateApplicationAndPushAndRequestToStart

Takes an input u64 titleID and an input #IStorage, no output. titleID=0 can be used to relaunch the current application.

CreateApplicationAndPushAndRequestToStartForQuest

Takes 2 input u32s (loaded from struct #ApplicationAttributeForQuest), an input u64 titleID, and an input #IStorage, no output.

CreateApplicationAndRequestToStart

Takes an input u64 titleID, no output.

Same as #CreateApplicationAndPushAndRequestToStart except without the input storage, official sw uses this when no input storage is specified.

CreateApplicationAndRequestToStartForQuest

Takes 2 input u32s (loaded from struct #ApplicationAttributeForQuest) and an input u64 titleID, no output.

Same as #CreateApplicationAndPushAndRequestToStartForQuest except without the input storage, official sw uses this when no input storage is specified.

CreateApplicationWithAttributeAndPushAndRequestToStartForQuest

Takes an input u64 titleID, a type-0x15 input buffer containing an #ApplicationAttribute, an input #IStorage, no output.

Same as #CreateApplicationAndPushAndRequestToStartForQuest except the entire attributes structure is directly specified via the input buffer. This command replaces #CreateApplicationAndPushAndRequestToStartForQuest, official user-processes no longer use #CreateApplicationAndPushAndRequestToStartForQuest.

CreateApplicationWithAttributeAndRequestToStartForQuest

Takes an input u64 titleID and a type-0x15 input buffer containing an #ApplicationAttribute, no output.

Same as #CreateApplicationAndRequestToStartForQuest except the entire attributes structure is directly specified via the input buffer. This command replaces #CreateApplicationAndRequestToStartForQuest, official user-processes no longer use #CreateApplicationAndPushAndRequestToStartForQuest.

GetDesiredLanguage

No input, returns an output LanguageCode.

SetTerminateResult

Takes an input u32 Result, no output.

For example, in some cases official apps use this with error 0x2A2 then uses svcBreak.

GetDisplayVersion

No input, returns an output 0x10-byte struct.

The output struct is "nn::oe::DisplayVersion". This the DisplayVersion string copied from the application control.nacp, this is always NUL-terminated.

BeginBlockingHomeButtonShortAndLongPressed

Takes an input s64, no output.

Official user-processes use hard-coded value 0 for the s64.

Starts blocking the Home button.

EndBlockingHomeButtonShortAndLongPressed

No input/output.

Ends the blocking started by #BeginBlockingHomeButtonShortAndLongPressed.

BeginBlockingHomeButton

Takes an input s64 nanoseconds, no output. The input nanoseconds can be zero.

EndBlockingHomeButton

No input/output.

NotifyRunning

Takes no input. Returns an output u8 bool, which is ignored by official user-processes.

GetPseudoDeviceId

No input, returns an output 0x10-byte "nn::util::Uuid" struct.

The 0x20-byte output data from GetSystemSeedForPseudoDeviceId followed by the 8-byte SeedForPseudoDeviceId from the current control.nacp, is hashed with SHA1. Then "nn::util::GenerateUuidVersion5" is called with the final hash, the output from this is then returned for the Uuid.

SetMediaPlaybackStateForApplication

Takes an input u8 bool, no output.

IsGamePlayRecordingSupported

No input, returns an output u8 bool.

InitializeGamePlayRecording

Takes a TransferMemory handle and an u64 for the size of the TransferMemory. The size must match 0x6000000 otherwise an error is returned.

SetGamePlayRecordingState

Takes an input u32. 0 = disable/pause, 1 = enable/restart.

RequestFlushGamePlayingMovieForDebug

No input/output.

RequestToShutdown

No input/output.

RequestToReboot

No input/output.

ExitAndRequestToShowThanksMessage

No input/output.

Used to exit the application and return to the kiosk menu. Official sw uses #UnlockExit immediately before this.

This throws an error when the cached Settings_services#GetQuestFlag value is 0.

EnableApplicationCrashReport

Takes an input u8 bool, no output.

InitializeApplicationCopyrightFrameBuffer

Takes an input TransferMemory handle, an s32 width, an s32 height, an u64 tmem_size, and no output.

tmem_size must be 0x40000-byte aligned. width must be 1-1280, and height must be 1-720.

User-processes create the tmem with an user-specified buffer with permissions=0. width = 1280 and height = 720.

This is used as an overlay for screenshots.

SetApplicationCopyrightImage

Takes a type-0x45 input buffer, an s32 x, an s32 y, an s32 width, an s32 height, an s32 WindowOriginMode, and no output.

The last s32 is "nn::oe::WindowOriginMode". This should be at least 1.

x and y must not have the negative bit set. width and height must not be <1.

Sets the RGBA8 image for use with #InitializeApplicationCopyrightFrameBuffer. Overrides the current image, if this was already used previously.

SetApplicationCopyrightVisibility

Takes an input u8 bool, no output.

Sets the visibility for the image set by #SetApplicationCopyrightImage, in screenshots. By default it's visible.

QueryApplicationPlayStatistics

Takes a type-0x6 output buffer containing an array of ApplicationPlayStatistics and a type-0x5 input buffer containing an array of u64 titleIDs. Returns an output s32 for actual total output entries.

The number of entries in each array is the same.

See also PlayLogQueryCapability.

This uses pdm:qry QueryApplicationPlayStatisticsForSystem.

QueryApplicationPlayStatisticsByUid

Takes a u128 userID, a type-0x6 output buffer containing an array of ApplicationPlayStatistics and a type-0x5 input buffer containing an array of u64 titleIDs. Returns an output s32 for actual total output entries.

Same as #QueryApplicationPlayStatistics except this uses pdm:qry cmd16, to get playstats specific to userIDs.

ExecuteProgram

Takes an input u32 #ProgramSpecifyKind and an input u64, no output.

ClearUserChannel

No input/output.

Clears the UserChannel used by #UnpopToUserChannel.

UnpopToUserChannel

Takes an input #IStorage, no output.

The input storage is pushed to the UserChannel. This is the same channel used by #LaunchParameterKind value 1.

User-processes create a storage using data specified by the user (written to offset=0 size=inputsize), with max size 0x1000. This storage is then used with this cmd.

GetPreviousProgramIndex

No input, returns an output s32.

EnableApplicationAllThreadDumpOnCrash

Takes an input u8 bool, no output.

GetGpuErrorDetectedSystemEvent

No input, returns an output Event handle with autoclear=false.

This is used by sdknso during applet-application initialization. A seperate thread is setup where event-waiting is handled. When the Event is signaled, official sw will assert.

CreateMovieMaker

Takes an input u64 and handle, returns an #IMovieMaker.

PrepareForJit

Takes no input. Launches title 010000000000003B (currently not present on retail systems) if some context variable is set.

IMovieMaker

Cmd	Name
0	#GetGrcMovieMaker
1	#GetLayerHandle

GetGrcMovieMaker

No input, returns a GRC IMovieMaker.

GetLayerHandle

No input, returns an output u64.

ILibraryAppletCreator

Cmd	Name	Notes
0	#CreateLibraryApplet
1	#TerminateAllLibraryApplets
2	#AreAnyLibraryAppletsLeft
10	#CreateStorage
11	#CreateTransferMemoryStorage
12	[2.0.0+] #CreateHandleStorage

CreateLibraryApplet

Takes 2 input u32s #AppletId and #LibraryAppletMode, returns an #ILibraryAppletAccessor.

TerminateAllLibraryApplets

No input/output.

AreAnyLibraryAppletsLeft

No input, returns an output u8 bool.

CreateStorage

Takes an input s64 for the storage size, returns an #IStorage.

This allocates a buffer with the specified size which can then be accessed via #IStorageAccessor.

CreateTransferMemoryStorage

Takes an input TransferMemory copy-handle, an input u8 bool, and an s64 size, returns an #IStorage.

The user-process creates the TransferMemory with permissions=0.

The TransferMemory is mapped, which can then be accessed via #IStorageAccessor. The input bool controls whether writing to the storage is allowed: #Write will throw an error if this flag is not set.

CreateHandleStorage

Takes an input copy-handle and an input s64, returns an #IStorage. In some cases the s64 must not have the negative bit set.

The input can be arbitrary, however official sw is only (?) known to use this for TransferMemory (with s64=size).

ILibraryAppletAccessor

Cmd	Name	Notes
0	#GetAppletStateChangedEvent
1	#IsCompleted
10	#Start
20	#RequestExit
25	#Terminate
30	#GetResult
50	#SetOutOfFocusApplicationSuspendingEnabled
100	#PushInData
101	#PopOutData
102	#PushExtraStorage
103	#PushInteractiveInData
104	#PopInteractiveOutData
105	#GetPopOutDataEvent
106	#GetPopInteractiveOutDataEvent
110	#NeedsToExitProcess
120	#GetLibraryAppletInfo
150	#RequestForAppletToGetForeground
160	[2.0.0+] #GetIndirectLayerConsumerHandle

Commands <=30 are inherited from #IAppletAccessor. GetLibraryAppletInfo is identical to the #ILibraryAppletSelfAccessor cmd.

SetOutOfFocusApplicationSuspendingEnabled

Takes an input u8 bool, no output.

PushInData

Takes an input #IStorage, no output.

PopOutData

No input, returns an output #IStorage.

PushExtraStorage

Takes an input #IStorage, no output.

PushInteractiveInData

Takes an input #IStorage, no output.

PopInteractiveOutData

No input, returns an output #IStorage.

GetPopOutDataEvent

No input, returns an output handle.

GetPopInteractiveOutDataEvent

No input, returns an output event handle with autoclear=false.

NeedsToExitProcess

No input, returns an output u8 bool.

RequestForAppletToGetForeground

No input/output.

GetIndirectLayerConsumerHandle

Takes an input PID and an input u64 AppletResourceUserId, returns an output u64 IndirectLayerConsumerHandle.

Official sw uses this during LibraryApplet creation when #LibraryAppletMode is 0x3.

ICommonStateGetter

Cmd	Name	Notes
0	#GetEventHandle
1	#ReceiveMessage
2	#GetThisAppletKind
3	AllowToEnterSleep
4	DisallowToEnterSleep
5	#GetOperationMode
6	#GetPerformanceMode
7	#GetCradleStatus
8	#GetBootMode
9	#GetCurrentFocusState
10	RequestToAcquireSleepLock
11	ReleaseSleepLock
12	ReleaseSleepLockTransiently
13	#GetAcquiredSleepLockEvent
20	#PushToGeneralChannel
30	#GetHomeButtonReaderLockAccessor
31	[2.0.0+] #GetReaderLockAccessorEx
32	[7.0.0+] #GetWriterLockAccessorEx
40	[2.0.0+] GetCradleFwVersion
50	[3.0.0+] #IsVrModeEnabled
51	[3.0.0+] #SetVrModeEnabled
52	[4.0.0+] SetLcdBacklighOffEnabled
53	[7.0.0+] #BeginVrModeEx
54	[7.0.0+] #EndVrModeEx
55	[3.0.0+] #IsInControllerFirmwareUpdateSection
60	[3.0.0+] GetDefaultDisplayResolution
61	[3.0.0+] #GetDefaultDisplayResolutionChangeEvent
62	[4.0.0+] GetHdcpAuthenticationState
63	[4.0.0+] GetHdcpAuthenticationStateChangeEvent
64	[5.0.0+] SetTvPowerStateMatchingMode
65	[5.1.0+] GetApplicationIdByContentActionName
66	[6.0.0+] #SetCpuBoostMode
80	[6.0.0+] PerformSystemButtonPressingIfInFocus
90	[7.0.0+] SetPerformanceConfigurationChangedNotification
91	[7.0.0+] GetCurrentPerformanceConfiguration
200	[7.0.0+] GetOperationModeSystemInfo

Officially notification messages are handled by the application itself, not sdk-nso in ExeFS. Official apps call code in sdk-nso which basically uses svcWaitSynchronization with the event from #GetEventHandle to check whether a message is available, then if so it uses #ReceiveMessage. The actual handling for message IDs is done in the app itself(see #NotificationMessage).

[7.0.0+] User-processes now use BeginVrModeEx/EndVrModeEx instead of #SetVrModeEnabled. Prior to using using BeginVrModeEx, pctl IsStereoVisionPermitted is used and error 0xD08E is thrown if not allowed by pctl.

GetEventHandle

No input. Returns an output event handle. This is signalled when a message is available with #ReceiveMessage.

ReceiveMessage

No input. Returns an output u32. Error 0x680 indicates no message is available.

GetThisAppletKind

No input, returns an output #AppletKind.

GetOperationMode

No input. Returns an output u8 for the current #OperationMode.

GetPerformanceMode

No input. Returns an output u32 for the current PerformanceMode.

GetCradleStatus

No input, returns an output u8.

GetBootMode

No input, returns an output u8.

Returns the value from pm:bm GetBootMode.

GetCurrentFocusState

No input. Returns an output u8:

• 1: In focus.
• 2/3: Out of focus(running in "background").

GetAcquiredSleepLockEvent

No input, returns an output handle.

PushToGeneralChannel

Takes an input #IStorage, no output.

This is not usable under an Application, however it is usable under a LibraryApplet.

Used for sending requests to qlaunch. sdk-nso creates a 0x10-byte storage which is sent to this. The following are the functions which use this, with the data written to the storage:

• RequestHomeMenu 5341 4d53 0100 0000 0200 0000 0100 0000 Returns to the main Home Menu, equivalent to pressing the HOME button.
• RequestJumpToSystemUpdate 5341 4d53 0100 0000 0b00 0000 0100 0000 Equivalent to entering "System Update" under System Settings. When leaving this, it returns to the main Home Menu.

GetHomeButtonReaderLockAccessor

No input, returns an output #ILockAccessor.

GetReaderLockAccessorEx

Takes an input u32, returns an output #ILockAccessor.

GetWriterLockAccessorEx

Takes an input u32, returns an output #ILockAccessor.

IsVrModeEnabled

No input, returns an output u8 bool.

SetVrModeEnabled

Takes an input u8 bool flag. No output.

Updates internal AM state fields. If the new state doesn't match the previous state, this uses the Backlight_services {Disable/Enable}VrMode command depending on whether flag={disable/enable}.

When the VrMode is set to true, the console shows a screen rendered like vr asking the user to move his face away and hit the 'close' button. When this button is pressed, the console resets the vrMode to false.

BeginVrModeEx

No input/output.

Identical to #SetVrModeEnabled except with hard-coded flag=1.

EndVrModeEx

No input/output.

Identical to #SetVrModeEnabled except with hard-coded flag=0.

IsInControllerFirmwareUpdateSection

No input, returns an output u8 bool.

GetDefaultDisplayResolutionChangeEvent

No input, returns an output handle.

SetCpuBoostMode

Takes an input u32 CpuBoostMode (only modes 0 and 1 are valid) and passes it to SetCpuBoostMode.

SetPerformanceConfigurationChangedNotification

Takes an input u8 bool, no output.

GetCurrentPerformanceConfiguration

No input, returns the result of calling GetCurrentPerformanceConfiguration.

GetOperationModeSystemInfo

No input, returns a total of 4-bytes of output.

ISelfController

Cmd	Name
0	#Exit
1	#LockExit
2	#UnlockExit
3	[2.0.0+] #EnterFatalSection
4	[2.0.0+] #LeaveFatalSection
9	#GetLibraryAppletLaunchableEvent
10	#SetScreenShotPermission
11	#SetOperationModeChangedNotification
12	#SetPerformanceModeChangedNotification
13	#SetFocusHandlingMode
14	#SetRestartMessageEnabled
15	[2.0.0+] #SetScreenShotAppletIdentityInfo
16	[2.0.0+] #SetOutOfFocusSuspendingEnabled
17	[3.0.0+] #SetControllerFirmwareUpdateSection
18	[3.0.0+] #SetRequiresCaptureButtonShortPressedMessage
19	[3.0.0+] #SetAlbumImageOrientation
20	[4.0.0+] SetDesirableKeyboardLayout
40	#CreateManagedDisplayLayer
41	[4.0.0+] IsSystemBufferSharingEnabled
42	[4.0.0+] GetSystemSharedLayerHandle
43	[5.0.0+] GetSystemSharedBufferHandle
50	#SetHandlesRequestToDisplay
51	#ApproveToDisplay
60	OverrideAutoSleepTimeAndDimmingTime
61	#SetMediaPlaybackState
62	SetIdleTimeDetectionExtension
63	GetIdleTimeDetectionExtension
64	SetInputDetectionSourceSet
65	[2.0.0+] #ReportUserIsActive
66	[3.0.0+] #GetCurrentIlluminance
67	[3.0.0+] #IsIlluminanceAvailable
68	[5.0.0+] SetAutoSleepDisabled
69	[5.0.0+] IsAutoSleepDisabled
70	[4.0.0+] ReportMultimediaError
71	[5.0.0+] #GetCurrentIlluminanceEx
80	[4.0.0+] #SetWirelessPriorityMode
90	[6.0.0+] GetAccumulatedSuspendedTickValue
91	[6.0.0+] GetAccumulatedSuspendedTickChangedEvent
100	[7.0.0+] #SetAlbumImageTakenNotificationEnabled
110	[8.0.0+] #SetApplicationAlbumUserData
1000	[7.0.0+] #GetDebugStorageChannel

Exit

No input/output.

LockExit

No input/output.

Locks exit process of pressing X to close in HOME Menu for an application or HOME button for an applet. When locked, it will show the "waiting for software to be closed dialog" until UnlockExit is called or a 15 seconds timeout (when the latter occurs, the process is force-terminated).

UnlockExit

No input/output.

Unlocks exit process, if LockExit was previously used.

EnterFatalSection

No input/output.

LeaveFatalSection

No input/output.

#EnterFatalSection must be executed at least once before executing this command, otherwise error code 0x40080 will be returned. EnterFatalSection and LeaveFatalSection work in pairs, that is, N calls to EnterFatalSection must be performed first in order to perform N executions of LeaveFatalSection. Essentially, these two functions operate like how one would lock and unlock a recursive mutex.

GetLibraryAppletLaunchableEvent

No input, returns an output event handle with autoclear=false.

SetScreenShotPermission

Takes an input s32. No output.

Controls whether screenshot-capture is allowed.

Value	Description
0	Inherit from parent applet
1	Enable
2	Disable

SetOperationModeChangedNotification

Takes an input u8 bool flag. No output.

SetPerformanceModeChangedNotification

Takes an input u8 bool flag. No output.

SetFocusHandlingMode

Takes 3 input u8s with each field located immediately after the previous u8, these are bool flags. No output.

SetRestartMessageEnabled

Takes an input u8 bool flag, no output.

See #NotificationMessage.

SetScreenShotAppletIdentityInfo

Takes an input 0x10-byte struct AppletIdentityInfo. No output.

SetOutOfFocusSuspendingEnabled

Takes an input u8 bool flag. No output.

SetControllerFirmwareUpdateSection

Takes an input u8 bool flag, no output.

SetRequiresCaptureButtonShortPressedMessage

Takes an input u8 bool flag, no output.

See #NotificationMessage.

When enabled with a non-Overlay applet, Overlay applet will not be notified of capture button short-presses for screenshots.

SetAlbumImageOrientation

Takes an input s32 "nn::album::ImageOrientation". No output.

CreateManagedDisplayLayer

Returns an output u64 LayerId which is then used by the user-process with Display_services#OpenLayer.

SetHandlesRequestToDisplay

Takes an input u8 bool, no output.

Sets an internal state flag. When the input flag is 0, this will in additional run the same code as #ApproveToDisplay.

ApproveToDisplay

No input/output.

SetMediaPlaybackState

Takes an input u8 bool, no output.

ReportUserIsActive

No input/output.

Uses idle:sys ReportUserIsActive.

GetCurrentIlluminance

No input, returns an output float.

Uses lbl command GetAmbientLightSensorValue, where only the output float is used.

IsIlluminanceAvailable

No input, returns an output u8 bool.

Uses lbl command IsAmbientLightSensorAvailable.

User-processes can use this to determine whether to continue with using GetCurrentIlluminance(Ex).

GetCurrentIlluminanceEx

No input, returns an output u8 bool and float.

Uses lbl command GetAmbientLightSensorValue.

SetWirelessPriorityMode

Takes an input s32 enum WirelessPriorityMode, no output.

The input value must be 1 or 2.

SetAlbumImageTakenNotificationEnabled

Takes an input u8 bool, no output.

See #NotificationMessage.

SetApplicationAlbumUserData

Takes a type-0x21 input buffer, no output.

The buffer contains arbitrary UserData.

The size must be <=0x400. The input buffer is copied to a buffer loaded from a state ptr (throwing an error when the state ptr is not set), with the u32 size being written to statebuf+0x400 afterwards.

GetDebugStorageChannel

Returns an output #IStorageChannel.

IStorageChannel

Added with 7.0.0.

Cmd	Name	Notes
0	Push	No input, returns an output #IStorage.
1	Unpop	No input, returns an output #IStorage.
2	Pop	No input, returns an output #IStorage.
3	GetPopEventHandle	No input, returns an output handle.
4	Clear	No input/output.

IWindowController

Cmd	Name	Notes
0	#CreateWindow
1	#GetAppletResourceUserId
2	[6.0.0+] GetAppletResourceUserIdOfCallerApplet
10	#AcquireForegroundRights
11	ReleaseForegroundRights
12	RejectToChangeIntoBackground
20	[7.0.0+] SetAppletWindowVisibility	Takes an input u8, no output.
21	[7.0.0+] SetAppletGpuTimeSlice	Takes a total of 8-bytes of input, no output.

CreateWindow

Takes an input u32, returns an output #IWindow.

GetAppletResourceUserId

Returns an output u64: #AppletResourceUserId.

AcquireForegroundRights

No input/output.

IAudioController

Cmd	Name
0	SetExpectedMasterVolume
1	GetMainAppletExpectedMasterVolume
2	GetLibraryAppletExpectedMasterVolume
3	ChangeMainAppletMasterVolume
4	SetTransparentVolumeRate

GetMainAppletExpectedMasterVolume/SetExpectedMasterVolume are used for saving/restoring state for LibraryApplet launching, with SetExpectedMasterVolume being used with new state prior to launching a LibraryApplet. With official sw these applet funcs are used directly in the main-codebin.

IDisplayController

Cmd	Name
0	GetLastForegroundCaptureImage
1	UpdateLastForegroundCaptureImage
2	GetLastApplicationCaptureImage
3	GetCallerAppletCaptureImage
4	UpdateCallerAppletCaptureImage
5	GetLastForegroundCaptureImageEx
6	GetLastApplicationCaptureImageEx
7	GetCallerAppletCaptureImageEx
8	[2.0.0+] TakeScreenShotOfOwnLayer
9	[5.0.0+] CopyBetweenCaptureBuffers
10	#AcquireLastApplicationCaptureBuffer
11	ReleaseLastApplicationCaptureBuffer
12	#AcquireLastForegroundCaptureBuffer
13	ReleaseLastForegroundCaptureBuffer
14	#AcquireCallerAppletCaptureBuffer
15	ReleaseCallerAppletCaptureBuffer
16	AcquireLastApplicationCaptureBufferEx
17	AcquireLastForegroundCaptureBufferEx
18	AcquireCallerAppletCaptureBufferEx
20	[3.0.0+] ClearCaptureBuffer
21	[3.0.0+] ClearAppletTransitionBuffer
22	[4.0.0+] AcquireLastApplicationCaptureSharedBuffer
23	[4.0.0+] ReleaseLastApplicationCaptureSharedBuffer
24	[4.0.0+] AcquireLastForegroundCaptureSharedBuffer
25	[4.0.0+] ReleaseLastForegroundCaptureSharedBuffer
26	[4.0.0+] AcquireCallerAppletCaptureSharedBuffer
27	[4.0.0+] ReleaseCallerAppletCaptureSharedBuffer
28	[6.0.0+] TakeScreenShotOfOwnLayerEx

AcquireLastApplicationCaptureBuffer

No input, returns an output handle.

AcquireLastForegroundCaptureBuffer

No input, returns an output handle.

AcquireCallerAppletCaptureBuffer

No input, returns an output handle.

ISystemAppletControllerForDebug

Cmd	Name	Notes
1	RequestLaunchApplicationForDebug
2	[7.0.0+] GetDebugStorageChannel	No input, returns an output #IStorageChannel.
3	[7.0.0+] CreateStorageForDebug	Takes a total of 8-bytes of input, returns an #IStorage.

IProcessWindingController

Cmd	Name	Notes
0	#GetLaunchReason
11	#OpenCallingLibraryApplet
21	#PushContext
22	#PopContext
23	CancelWindingReservation
30	WindAndDoReserved
40	#ReserveToStartAndWaitAndUnwindThis
41	[4.0.0+] ReserveToStartAndWait

GetLaunchReason

No input. Returns an u32 AppletProcessLaunchReason.

Used by LibraryApplets.

OpenCallingLibraryApplet

No input, returns an output #ILibraryAppletAccessor.

PushContext

Takes an input #IStorage, no output.

PopContext

No input, returns an output #IStorage.

ReserveToStartAndWaitAndUnwindThis

Takes an input #ILibraryAppletAccessor, no output.

IDebugFunctions

Cmd	Name	Notes
0	NotifyMessageToHomeMenuForDebug
1	#OpenMainApplication
10	EmulateButtonEvent
20	InvalidateTransitionLayer
30	[6.0.0+] RequestLaunchApplicationWithUserAndArgumentForDebug
40	[6.0.0+] GetAppletResourceUsageInfo
100	[7.0.0+] #SetCpuBoostModeForApplet

OpenMainApplication

No input, returns an output #IApplicationAccessor.

SetCpuBoostModeForApplet

Takes an input u32 CpuBoostMode (only modes 0 and 1 are valid) and passes it to SetCpuBoostMode.

IStorage

Cmd	Name	Notes
0	Open	No input. Returns an #IStorageAccessor.
1	[2.0.0+] OpenTransferStorage	No input. Returns an #ITransferStorageAccessor.

Open can only be used when the IStorage was created by #CreateStorage or #CreateTransferMemoryStorage. OpenTransferStorage can only be used when the IStorage was created by #CreateHandleStorage.

Only 1 *Accessor session can be open for each IStorage at a time.

IStorageAccessor

Cmd	Name	Notes
0	GetSize	No input. Returns an s64.
10	Write	Takes an input s64 and a type-0x21 input buffer.
11	Read	Takes an input s64 and a type-0x22 output buffer.

ITransferStorageAccessor

Cmd	Name	Notes
0	GetSize	No input. Returns an output s64.
1	GetHandle	No input. Returns an output s64 and handle.

These commands return the data originally from #CreateHandleStorage input, both return the same s64.

appletOE

This is "nn::am::service::IApplicationProxyService".

Cmd	Name	Notes
0	#OpenApplicationProxy

This is used by all regular-applications, including flog and "Retail Interactive Display Menu". Only one session can be open for this service at a time.

OpenApplicationProxy

Returns an #IApplicationProxy. See #appletAE.

Takes a reserved input u64 (official user-processes use hard-coded value 0), a PID, and a process copy-handle (cur-proc handle alias).

On failure, official user-processes will retry using this command in a loop while the retval is 0x19280, with svcSleepThread(10000000) being called first.

idle:sys

This is "nn::idle::detail::IPolicyManagerSystem"

Cmd	Name
0	GetAutoPowerDownEvent
1	[1.0.0-3.0.2]
	[7.0.0+]
2	[1.0.0-3.0.2]
3	SetHandlingContext
4	LoadAndApplySettings
5	ReportUserIsActive

[3.0.0+] SetHandlingContext now takes an additional 0x10-bytes of input.

omm

This is "nn::omm::detail::IOperationModeManager"

Operation Mode Manager (OMM) is a service responsible for arbitrating the operation changes between docked and handheld modes. Besides PTM_services, this is the only service that interacts with the Dock through usb:pd*.

Cmd	Name	Notes
0	GetOperationMode
1	GetOperationModeChangeEvent
2	EnableAudioVisual
3	DisableAudioVisual
4	EnterSleepAndWait
5	GetCradleStatus
6	FadeInDisplay
7	FadeOutDisplay
8	[2.0.0+] GetCradleFwVersion
9	[2.0.0+] NotifyCecSettingsChanged
10	[3.0.0+] SetOperationModePolicy
11	[3.0.0+] GetDefaultDisplayResolution
12	[3.0.0+] GetDefaultDisplayResolutionChangeEvent
13	[3.0.0+] UpdateDefaultDisplayResolution
14	[3.0.0+] ShouldSleepOnBoot
15	[4.0.0+] NotifyHdcpApplicationExecutionStarted
16	[4.0.0+] NotifyHdcpApplicationExecutionFinished
17	[4.0.0+] NotifyHdcpApplicationDrawingStarted
18	[4.0.0+] NotifyHdcpApplicationDrawingFinished
19	[4.0.0+] GetHdcpAuthenticationFailedEvent
20	[4.0.0+] GetHdcpAuthenticationFailedEmulationEnabled
21	[4.0.0+] SetHdcpAuthenticationFailedEmulation
22	[4.0.0+] GetHdcpStateChangeEvent
23	[4.0.0+] GetHdcpState
24	[5.0.0+] ShowCardUpdateProcessing
25	[5.0.0+] SetApplicationCecSettingsAndNotifyChanged
26	[7.0.0+]	No input, returns a total of 4-bytes of output.

spsm

This is "nn::spsm::detail::IPowerStateInterface".

Cmd	Name
0	GetState
1	SleepSystemAndWaitAwake
2
3
4	GetNotificationMessageEventHandle
5
6
7
8	AnalyzePerformanceLogForLastSleepWakeSequence
9	ChangeHomeButtonLongPressingTime
10
11	[1.0.0-3.0.2]

[3.0.0+] Cmd11 now takes a total of 8-bytes of input.

tcap

This is "nn::tcap::server::IManager".

Cmd	Name
0	GetContinuousHighSkinTemperatureEvent
1	SetOperationMode
2	LoadAndApplySettings

caps:su

This is "nn::capsrv::sf::IScreenShotApplicationService".

This was added with 6.0.0.

This can be used by applications to save screenshots.

Cmd	Name	Notes
32	[7.0.0+] SetShimLibraryVersion	Takes a total of 0x10-bytes of input and a PID, no output.
201	SaveScreenShot
203	SaveScreenShotEx0
205	[8.0.0+] SaveScreenShotEx1
210	SaveScreenShotEx2	Takes a total of 0x50-bytes of input, a type-0x15 input buffer, and a type-0x45 input buffer. Returns a total of 0x20-bytes of output.

SetShimLibraryVersion is a wrapper for caps:c cmd33. Commands SaveScreenShot, SaveScreenShotEx0, SaveScreenShotEx1 and SaveScreenShotEx2 are wrappers for caps:sc cmd210.

SaveScreenShot

Takes two input u32s, an u64 AppletResourceUserId, a PID, and a type-0x45 input buffer. Returns a 0x20-byte struct ApplicationAlbumEntry.

Official user-processes doesn't use this, instead #SaveScreenShotEx0 is used: ScreenShotAttributeEx0 is all-zero except +0 is set to an input u32.

SaveScreenShotEx0

Takes an input 0x40-byte struct ScreenShotAttributeEx0, an input u32, an input u64 AppletResourceUserId, a PID, and a type-0x45 input buffer. Returns a 0x20-byte struct ApplicationAlbumEntry.

Library Applets

This section documents library applet launching.

Before starting the applet, #IStorages are created and written, then passed to #ILibraryAppletAccessor PushInData. The #IStorage session is closed afterwards. The first #IStorage is #CommonArguments, followed by any applet-specific #IStorages.

Once the applet finishes running successfully, #ILibraryAppletAccessor PopOutData can be used to get the applet-specific #IStorage containing the applet output data.

CommonArguments

The first IStorage passed to applets should contain the common library applet arguments. This is populated by nn::la::CommonArgumentsWriter and has the following format.

This struct is 0x20-bytes.

Official sw handles the first 8-bytes separately, which is a header. With CommonArguments version 0x0, the header is 4-bytes, while starting with version 0x1 it's 8-bytes.

Offset	Size	Typical Value	Notes
0x0	4	1	Common Arguments version
0x4	4	0x20	Common Arguments size
0x8	4		Library applet version (API version)
0xC	4	0	Theme color
0x10	1	0	Play startup sound
0x18	8	N/A	System tick (see svcGetSystemTick)

Enums

AppletId

See also Category:Library Applets.

ID	Title-id	Description
0x01		Application. Not valid for use with LibraryApplets.
0x02	010000000000100C	"overlayDisp"
0x03	0100000000001000	"qlaunch"
0x04	0100000000001012	"starter"
0x0A	0100000000001001	"auth"
0x0B	0100000000001002	"cabinet"
0x0C	0100000000001003	"controller"
0x0D	0100000000001004	"dataErase"
0x0E	0100000000001005	"error"
0x0F	0100000000001006	"netConnect"
0x10	0100000000001007	"playerSelect"
0x11	0100000000001008	"swkbd"
0x12	0100000000001009	"miiEdit"
0x13	010000000000100A	"LibAppletWeb" WebApplet applet
0x14	010000000000100B	"LibAppletShop" ShopN applet
0x15	010000000000100D	"photoViewer"
0x16	010000000000100E	"set"
0x17	010000000000100F	"LibAppletOff" Offline applet
0x18	0100000000001010	"LibAppletLns" Whitelisted applet
0x19	0100000000001011	"LibAppletAuth" WifiWebAuth applet
0x1A	0100000000001013	"myPage"

LibraryAppletMode

ID	Description
0x0	AllForeground
0x1	Background
0x2	No UI
0x3	Background with indirect display, see also #GetIndirectLayerConsumerHandle. Only used by swkbd InlineKeyboard.
0x4	AllForegroundInitiallyHidden. Can be used by [7.0.0+] WebSession.

NotificationMessage

ID	Description
0x4	Exit requested
0xF	FocusState changed
0x10	Current applet execution was resumed.
0x1E	OperationMode changed
0x1F	PerformanceMode changed
0x5A	Capture button was short-pressed.
0x5C	Screenshot was taken.

OperationMode

Value	Description
0	Handheld
1	Docked

LaunchParameterKind

Value	Description
1	Application-specific LaunchParameter
2	account PreselectedUser
3	Unknown if used by anything?

LibraryAppletExitReason

Value	Description
0	Normal
1	Canceled
2	Abnormal
10	Unexpected

ProgramSpecifyKind

Value	Description
0	u8 ProgramIndex. "ExecuteProgram". User-process enters an infinite svcSleepThread loop afterwards.
1	u64 titleID. "JumpToSubApplicationProgramForDevelopment". Only available when DebugMode is 1.
2	u64 = value 0. "RestartProgram"

This is "nn::am::service::ProgramSpecifyKind". This controls the type of the u64 passed to #ExecuteProgram.

AppletResourceUserId

This u64 is officially called "nn::applet::AppletResourceUserId". Used by a number of non-AM services.

LibraryAppletInfo

This struct is 8-bytes: +0 u32 is #AppletId, +4 u32 is #LibraryAppletMode.

AppletKind

This is 8-bytes.

ApplicationAttributeForQuest

Offset	Size	Description
0x0	0x4	See #ApplicationAttribute.
0x4	0x4	See #ApplicationAttribute.
0x8	0x4	[7.0.0+] See #ApplicationAttribute.

This struct is "nn::applet::ApplicationAttributeForQuest".

User-processes copy the first 0x8-bytes (0xC-bytes with #CreateApplicationWithAttributeAndPushAndRequestToStartForQuest/#CreateApplicationWithAttributeAndRequestToStartForQuest) to a #ApplicationAttribute with the rest of the struct being cleared, which is then passed to the actual cmd (CreateApplication*ToStartForQuest).

ApplicationAttribute

Offset	Size	Description
0x0	0x4	Default is 0 for non-Quest. Only used when non-zero: unknown value in seconds.
0x4	0x4	Default is 0 for non-Quest. Only used when non-zero: unknown value in seconds.
0x8	0x4	float audio volume. Must be in the range of 0.0f-1.0f. The default is 1.0f.
0xC	0x14	Unused. Default is 0.

This struct is "nn::am::ApplicationAttribute". This struct is 0x20-bytes.

Internally AM only uses the first 0xC-bytes from ApplicationAttribute, regardless of the cmd.

Notes

AM-sysmodule will only initialize pdm:ntfy / use pdm:ntfy service commands when the value from pm:bm GetBootMode is not 0x1.