Difference between revisions of "Applet Manager services"
| Line 2,367: | Line 2,367: | ||
The cached value loaded from [[Settings_services#GetDebugModeFlag]] must be 1, otherwise an error is returned. | The cached value loaded from [[Settings_services#GetDebugModeFlag]] must be 1, otherwise an error is returned. | ||
| − | The s32 must the value already stored in state when the state value is non-zero, otherwise an error is returned. When the state value is 0, the s32 is written into state. Then input storage is pushed to the StorageChannel. | + | The s32 must match the value already stored in state when the state value is non-zero, otherwise an error is returned. When the state value is 0, the s32 is written into state. Then input storage is pushed to the StorageChannel. |
=== TryPopFromAppletBoundChannelForDebug === | === TryPopFromAppletBoundChannelForDebug === | ||
Revision as of 21:25, 15 November 2019
AM (Applet Manager) provides services for interacting with system applets while abstracting several aspects of power and operation management.
Contains multiple raw images, with at least the following: "NN_OMM_CHARGING_BIN_{begin|end}"(charging icon), low-battery icon, and the Nintendo Switch logo displayed during system boot.
appletAE
This is "nn::am::service::IAllSystemAppletProxiesService".
| Cmd | Name | Notes |
|---|---|---|
| 100 | OpenSystemAppletProxy | Returns an #ISystemAppletProxy. |
| 200 | OpenLibraryAppletProxyOld ([1.0.0-2.3.0] OpenLibraryAppletProxy) | Returns an #ILibraryAppletProxy. |
| 201 | [3.0.0+] #OpenLibraryAppletProxy | Returns an #ILibraryAppletProxy. |
| 300 | OpenOverlayAppletProxy | Returns an #IOverlayAppletProxy. |
| 350 | OpenSystemApplicationProxy | Returns an #IApplicationProxy. |
| 400 | #CreateSelfLibraryAppletCreatorForDevelop | |
| 410 | [6.0.0+] #GetSystemAppletControllerForDebug | |
| 1000 | [6.0.0+] #GetDebugFunctions |
All of these Open*Proxy commands except #OpenLibraryAppletProxy take the same input as #OpenApplicationProxy, with the same user-process retry-loop as #OpenApplicationProxy. These Open*Proxy commands (including appletOE) doesn't seem to usable from processes which aren't actual applets (such as sysmodules), at least for applet-types which aren't already in use.
OpenLibraryAppletProxyOld eventually calls the same func as #OpenLibraryAppletProxy, except that the #AppletAttribute is all-zero.
This service is used by all system non-regular-applications.
The 01000000000010XX system titles use the following applet types(above Open{type}Proxy commands):
- "qlaunch": SystemApplet
- "overlay": OverlayApplet
- "starter": SystemApplication
- "maintenance": SystemApplet
- All others: LibraryApplet
OpenLibraryAppletProxy
Returns an #ILibraryAppletProxy.
Takes a reserved input u64(official user-processes use hard-coded value 0), a PID,a process copy-handle(cur-proc handle alias), and a type-0x15 input buffer containing an #AppletAttribute.
Official user-processes use the same retry loop with this as the other Open*Proxy commands.
CreateSelfLibraryAppletCreatorForDevelop
Takes a PID and an input u64 pid_placeholder, returns an #ILibraryAppletCreator.
The cached value loaded from Settings_services#GetDebugModeFlag must be 1, otherwise an error is returned.
The cached value loaded from system-setting am.debug!dev_function must be set to 0x1 with size 0x1, otherwise an error is returned.
GetSystemAppletControllerForDebug
No input, returns an #ISystemAppletControllerForDebug.
The cached value loaded from system-setting am.debug!dev_function must be set to 0x1 with size 0x1, and various state checks must pass, otherwise 0 is returned with no output interface.
GetDebugFunctions
No input, returns an #IDebugFunctions.
The cached value loaded from system-setting am.debug!dev_function must be set to 0x1 with size 0x1, otherwise 0 is returned with no output interface.
ISystemAppletProxy
| Cmd | Name | Notes |
|---|---|---|
| 0 | GetCommonStateGetter | Returns an #ICommonStateGetter. |
| 1 | GetSelfController | Returns an #ISelfController. |
| 2 | GetWindowController | Returns an #IWindowController. |
| 3 | GetAudioController | Returns an #IAudioController. |
| 4 | GetDisplayController | Returns an #IDisplayController. |
| 10 | GetProcessWindingController | Returns an #IProcessWindingController. |
| 11 | GetLibraryAppletCreator | Returns an #ILibraryAppletCreator. |
| 20 | GetHomeMenuFunctions | Returns an #IHomeMenuFunctions. |
| 21 | GetGlobalStateController | Returns an #IGlobalStateController. |
| 22 | GetApplicationCreator | Returns an #IApplicationCreator. |
| 23 | [7.0.0+] GetAppletCommonFunctions | Returns an #IAppletCommonFunctions. |
| 1000 | GetDebugFunctions | Returns an #IDebugFunctions. |
IHomeMenuFunctions
| Cmd | Name | Notes |
|---|---|---|
| 10 | #RequestToGetForeground | |
| 11 | #LockForeground | |
| 12 | #UnlockForeground | |
| 20 | #PopFromGeneralChannel | |
| 21 | #GetPopFromGeneralChannelEvent | |
| 30 | #GetHomeButtonWriterLockAccessor | |
| 31 | [2.0.0+] #GetWriterLockAccessorEx | |
| 100 | [6.0.0+] #PopRequestLaunchApplicationForDebug | |
| 110 | [9.0.0+] #IsForceTerminateApplicationDisabledForDebug | |
| 200 | [8.0.0+] #LaunchDevMenu |
RequestToGetForeground
No input/output.
LockForeground
No input/output.
UnlockForeground
No input/output.
PopFromGeneralChannel
No input, returns an output #IStorage.
GetPopFromGeneralChannelEvent
No input, returns an output Event handle with autoclear=false.
GetHomeButtonWriterLockAccessor
No input, returns an output #ILockAccessor.
Similar to using #GetWriterLockAccessorEx with inval=0.
GetWriterLockAccessorEx
Takes an input u32, returns an output #ILockAccessor.
The input value must be 0-3. 0 = HomeButton.
PopRequestLaunchApplicationForDebug
Takes a type-0x6 output buffer containing an array of u128 userIDs, returns an output u64 titleID (nn::ncm::ApplicationId) and an output s32 total_userIDs.
The total entries in the userID buffer must be >= {total userIDs in state}.
IsForceTerminateApplicationDisabledForDebug
No input, returns an output u8 bool.
When the cached value loaded from Settings_services#GetDebugModeFlag is 0 this will just set the bool to 0. Otherwise, the bool is loaded using data from system-setting am.debug!disable_force_terminate_application.
LaunchDevMenu
No input/output.
The cached value loaded from Settings_services#GetDebugModeFlag must be 1, otherwise an error is returned.
Uses NS_Services#IApplicationManagerInterface cmd99.
This is used by qlaunch. On success, official sw will enter an infinite loop with sleep-thread value 86400000000000.
ILockAccessor
| Cmd | Name |
|---|---|
| 1 | #TryLock |
| 2 | #Unlock |
| 3 | #GetEvent |
TryLock
Takes an input u8 bool flag, returns an output u8 bool flag and a handle.
Official sw waits on the previously loaded event from #GetEvent. The output flag indicates whether locking was successful, the user-process can try using this cmd again when flag=false.
Official sw only uses inflag=false. Official sw just closes the output handle. The input flag controls whether this returns the output handle.
Unlock
No input/output.
GetEvent
No input, returns an output Event handle with autoclear=false.
IGlobalStateController
| Cmd | Name | Notes |
|---|---|---|
| 0 | #RequestToEnterSleep | |
| 1 | #EnterSleep | |
| 2 | #StartSleepSequence | |
| 3 | #StartShutdownSequence | |
| 4 | #StartRebootSequence | |
| 9 | [7.0.0+] #IsAutoPowerDownRequested | |
| 10 | #LoadAndApplyIdlePolicySettings | |
| 11 | [2.0.0+] #NotifyCecSettingsChanged | |
| 12 | [3.0.0+] #SetDefaultHomeButtonLongPressTime | |
| 13 | [3.0.0+] #UpdateDefaultDisplayResolution | |
| 14 | [3.0.0+] #ShouldSleepOnBoot | |
| 15 | [4.0.0+] #GetHdcpAuthenticationFailedEvent |
RequestToEnterSleep
No input/output.
Stubbed, just returns an error.
EnterSleep
No input/output.
Stubbed, just returns an error.
StartSleepSequence
Takes an input u8 bool, no output.
Official sw uses hard-coded input value = 1.
StartShutdownSequence
No input/output.
StartRebootSequence
No input/output.
IsAutoPowerDownRequested
No input, returns an output u8 bool.
Uses #idle:sys cmd1.
LoadAndApplyIdlePolicySettings
No input/output.
Uses #idle:sys cmd LoadAndApplySettings.
NotifyCecSettingsChanged
No input/output.
Uses #omm cmd NotifyCecSettingsChanged.
SetDefaultHomeButtonLongPressTime
Takes an input s64, no output.
UpdateDefaultDisplayResolution
No input/output.
Uses #omm cmd UpdateDefaultDisplayResolution.
ShouldSleepOnBoot
No input, returns an output u8 bool.
Uses #omm cmd ShouldSleepOnBoot.
GetHdcpAuthenticationFailedEvent
No input, returns an output Event handle with autoclear=false.
Uses #omm cmd GetHdcpAuthenticationFailedEvent.
IApplicationCreator
| Cmd | Name | Notes |
|---|---|---|
| 0 | #CreateApplication | |
| 1 | #PopLaunchRequestedApplication | |
| 10 | #CreateSystemApplication | |
| 100 | #PopFloatingApplicationForDevelopment |
#CreateApplication/#CreateSystemApplication eventually call the same internal func. With #CreateApplication, two ptrs passed to the internal func are NULL, while with #CreateSystemApplication these are loaded from state. The initial content of #ApplicationLaunchRequestInfo is all-zero with #CreateSystemApplication, while with #CreateApplication the first two u32s are value 0x3 with the rest all-zero. The #AppletId is set to 0x01 with #CreateApplication, while with #CreateSystemApplication it's 0x04.
CreateApplication
Takes an input u64 titleID (nn::ncm::ApplicationId), returns an #IApplicationAccessor.
PopLaunchRequestedApplication
No input, returns an #IApplicationAccessor.
CreateSystemApplication
Takes an input u64 titleID (nn::ncm::SystemApplicationId), returns an #IApplicationAccessor.
qlaunch only uses this with a hard-coded titleID for the "starter" title.
PopFloatingApplicationForDevelopment
No input, returns an #IApplicationAccessor.
Should not be used if no FloatingApplication is available (svcBreak).
IApplicationAccessor
| Cmd | Name | Notes |
|---|---|---|
| 0 | #GetAppletStateChangedEvent | |
| 1 | #IsCompleted | |
| 10 | #Start | |
| 20 | #RequestExit | |
| 25 | #Terminate | |
| 30 | #GetResult | |
| 101 | #RequestForApplicationToGetForeground | |
| 110 | #TerminateAllLibraryApplets | |
| 111 | #AreAnyLibraryAppletsLeft | |
| 112 | #GetCurrentLibraryApplet | |
| 120 | #GetApplicationId | |
| 121 | #PushLaunchParameter | |
| 122 | #GetApplicationControlProperty | |
| 123 | [2.0.0+] #GetApplicationLaunchProperty | |
| 124 | [6.0.0+] #GetApplicationLaunchRequestInfo | |
| 130 | [6.0.0+] #SetUsers | |
| 131 | [6.0.0+] #CheckRightsEnvironmentAvailable | |
| 132 | [6.0.0+] #GetNsRightsEnvironmentHandle | |
| 140 | [6.0.0+] #GetDesirableUids | |
| 150 | [6.0.0+] #ReportApplicationExitTimeout | |
| 160 | [8.0.0+] #SetApplicationAttribute | |
| 170 | [8.0.0+] #HasSaveDataAccessPermission | |
| 180 | [9.0.0+] #PushToFriendInvitationStorageChannel | |
| 190 | [9.0.0+] #PushToNotificationStorageChannel |
Commands <=30 are inherited from #IAppletAccessor.
RequestForApplicationToGetForeground
No input/output.
GetCurrentLibraryApplet
No input, returns an output #IAppletAccessor.
GetApplicationId
No input, returns an output u64 titleID.
Gets the Application titleID.
PushLaunchParameter
Takes an input u32 #LaunchParameterKind and an input #IStorage, no output.
GetApplicationControlProperty
No input, takes a type-0x6 output buffer.
The output buffer must be at least 0x4000-bytes. Returns an error when the #AppletId is 0x04, aka when the IApplicationAccessor is for a SystemApplication.
This gets the application control.nacp.
GetApplicationLaunchProperty
Takes a type-0x6 output buffer.
The output buffer size must be at least 0x10-bytes. Returns an error when the #AppletId is 0x04, aka when the IApplicationAccessor is for a SystemApplication.
This gets the #ApplicationLaunchProperty.
GetApplicationLaunchRequestInfo
No input, returns an output 0x10-byte struct.
This gets the #ApplicationLaunchRequestInfo from state. The output struct is "nn::applet::ApplicationLaunchRequestInfo".
SetUsers
Takes an input u8 bool flag and a type-0x5 input buffer containing an array of u128 userIDs.
The total entries for the userIDs must be <=8.
When the input flag is true, this just clears the users_available state flag to 0 and returns.
CheckRightsEnvironmentAvailable
No input, returns an output u8 bool.
GetNsRightsEnvironmentHandle
No input, returns an output u64.
GetDesirableUids
Takes a type-0x6 output buffer containing an array of u128 userIDs, returns an output s32 total_entries.
Gets a userID listing, this is unrelated to #SetUsers. qlaunch only uses 1 userID with this.
The stored entry-count in state must be <= <size of output buffer in entries>.
ReportApplicationExitTimeout
No input/output.
SetApplicationAttribute
Takes a type-0x15 input buffer containing an #ApplicationAttribute, no output.
HasSaveDataAccessPermission
Takes an input u64 titleID, returns an output u8 bool flag.
Gets whether the savedata specified by the input titleID is accessible. The output flag indicates whether it's accessible.
If the titleID matches the current application titleID, this immediately returns success with flag=1.
PushToFriendInvitationStorageChannel
Takes an input #IStorage, no output.
Clears the FriendInvitation StorageChannel, then pushes the input storage there.
PushToNotificationStorageChannel
Takes an input #IStorage, no output.
Clears the Notification StorageChannel, then pushes the input storage there.
IAppletAccessor
| Cmd | Name |
|---|---|
| 0 | #GetAppletStateChangedEvent |
| 1 | #IsCompleted |
| 10 | #Start |
| 20 | #RequestExit |
| 25 | #Terminate |
| 30 | #GetResult |
GetAppletStateChangedEvent
No input, returns an output event handle with autoclear=false.
IsCompleted
No input, returns an output u8 bool.
Start
No input/output.
RequestExit
No input/output.
Terminate
No input/output.
GetResult
No input/output.
IAppletCommonFunctions
Added with 7.0.0.
| Cmd | Name | Notes |
|---|---|---|
| 0 | [9.0.0+] #SetTerminateResult | |
| 10 | #ReadThemeStorage | |
| 11 | #WriteThemeStorage | |
| 20 | [9.0.0+] #PushToAppletBoundChannel | |
| 21 | [9.0.0+] #TryPopFromAppletBoundChannel | |
| 40 | [8.0.0+] #GetDisplayLogicalResolution | |
| 42 | [8.0.0+] #SetDisplayMagnification | |
| 50 | [8.0.0+] #SetHomeButtonDoubleClickEnabled | |
| 51 | [8.0.0+] #GetHomeButtonDoubleClickEnabled |
ReadThemeStorage/WriteThemeStorage: these commands copy data from/to a state buffer and the user specified buffer. The size of the state buffer is 0x400-bytes. The default content of the ThemeStorage prior to using the WriteThemeStorage cmd, is: memset(statebuf, 0xAA, 0x400);
ReadThemeStorage
Takes an input u64 offset and a type-0x22 output buffer, returns an output u64 actual_transfer_size.
WriteThemeStorage
Takes an input u64 offset and a type-0x21 input buffer, no output.
PushToAppletBoundChannel
Takes an input #IStorage, no output.
This is similar to #PushToAppletBoundChannelForDebug (no DebugMode check), except the used s32 is loaded from elsewhere and must be in the range 31-32.
TryPopFromAppletBoundChannel
No input, returns an output #IStorage.
This is similar to #TryPopFromAppletBoundChannelForDebug (no DebugMode check), except the used s32 is loaded from elsewhere and must be in the range 31-32.
GetDisplayLogicalResolution
No input, returns an output s32 width and s32 height.
SetDisplayMagnification
Takes an input float x, float y, float width, and float height, no output.
Sets the DisplayMagnification. This is essentially layer image crop, for everything non-Overlay.
x and width are multiplied with the same width value returned by #GetDisplayLogicalResolution, so these should be in the range 0.0f-1.0f. Likewise for y and height, except these are multipled with the height value.
SetHomeButtonDoubleClickEnabled
Takes an input u8 bool, no output.
GetHomeButtonDoubleClickEnabled
No input, returns an output u8 bool.
ILibraryAppletProxy
| Cmd | Name | Notes |
|---|---|---|
| 0 | GetCommonStateGetter | Returns an #ICommonStateGetter. |
| 1 | GetSelfController | Returns an #ISelfController. |
| 2 | GetWindowController | Returns an #IWindowController. |
| 3 | GetAudioController | Returns an #IAudioController. |
| 4 | GetDisplayController | Returns an #IDisplayController. |
| 10 | GetProcessWindingController | Returns an #IProcessWindingController. |
| 11 | GetLibraryAppletCreator | Returns an #ILibraryAppletCreator. |
| 20 | OpenLibraryAppletSelfAccessor | Returns an #ILibraryAppletSelfAccessor. |
| 21 | [7.0.0+] GetAppletCommonFunctions | No input, returns an #IAppletCommonFunctions. |
| 1000 | GetDebugFunctions | Returns an #IDebugFunctions. |
ILibraryAppletSelfAccessor
PopInData
No input, returns an output #IStorage.
PushOutData
Takes an input #IStorage, no output.
PopInteractiveInData
No input, returns an output #IStorage.
PushInteractiveOutData
Takes an input #IStorage, no output.
GetPopInDataEvent
No input, returns an output Event handle with autoclear=false.
GetPopInteractiveInDataEvent
No input, returns an output Event handle with autoclear=false.
ExitProcessAndReturn
No input/output.
Exits the LibraryApplet and returns to running the title which launched this LibraryApplet (qlaunch for example).
On success, official sw will enter an infinite loop with sleep-thread value 86400000000000.
GetLibraryAppletInfo
No input, returns an output #LibraryAppletInfo.
GetMainAppletIdentityInfo
No input, returns an output #AppletIdentityInfo.
CanUseApplicationCore
No input, returns an output u8 bool.
GetCallerAppletIdentityInfo
No input, returns an output #AppletIdentityInfo.
GetMainAppletApplicationControlProperty
No input, takes a type-0x16 output buffer.
This gets the control.nacp.
GetMainAppletStorageId
No input, returns an output u8 storageId.
GetCallerAppletIdentityInfoStack
Takes a type-0x6 output buffer containing an array of #AppletIdentityInfo, and returns an output s32 total_entries.
GetNextReturnDestinationAppletIdentityInfo
No input, returns an output #AppletIdentityInfo.
GetDesirableKeyboardLayout
No input, returns an output u32.
The output u32 is "nn::settings::KeyboardLayout".
This gets the value previously set by #SetDesirableKeyboardLayout. An error is returned if it's not set.
PopExtraStorage
No input, returns an output #IStorage.
GetPopExtraStorageEvent
No input, returns an output Event handle with autoclear=false.
UnpopInData
Takes an input #IStorage, no output.
UnpopExtraStorage
Takes an input #IStorage, no output.
GetIndirectLayerProducerHandle
No input, returns an output u64.
ReportVisibleError
Takes an input ErrorCode, no output.
ReportVisibleErrorWithErrorContext
Takes an input ErrorCode and a type-0x15 input buffer containing an ErrorContext, no output.
GetMainAppletApplicationDesiredLanguage
No input, returns an output LanguageCode.
GetCurrentApplicationId
No input, returns an output u64.
Gets the titleID for the currently running Application. titleID=0 when no Application is running.
RequestExitToSelf
No input/output.
Same as #RequestExit except this is for the current applet.
CreateApplicationAndPushAndRequestToLaunch
Takes an input u64 titleID and an input #IStorage, no output.
This is is similar to #CreateApplicationAndPushAndRequestToStart.
CreateGameMovieTrimmer
Takes an input u64 size and a TransferMemory handle, returns a GRC IGameMovieTrimmer.
This is a wrapper for GRC OpenGameMovieTrimmer.
Official sw uses an user-buffer for the tmem, with permissions=0.
ReserveResourceForMovieOperation
No input/output.
Updates state fields. This must be used before #CreateGameMovieTrimmer.
UnreserveResourceForMovieOperation
No input/output.
Updates state fields. This must be used once finished with IGameMovieTrimmer.
GetMainAppletAvailableUsers
Takes a type-0x6 output buffer containing an array of u128 userIDs, returns an output u8 bool and a s32 total_entries.
This gets the userIDs previously set by #SetUsers.
The size of the output buffer in entries must be at least 8.
Normally the output bool is set to 0, however when no users are available it's set to 1 with total_entries = -1.
IOverlayAppletProxy
| Cmd | Name | Notes |
|---|---|---|
| 0 | GetCommonStateGetter | Returns an #ICommonStateGetter. |
| 1 | GetSelfController | Returns an #ISelfController. |
| 2 | GetWindowController | Returns an #IWindowController. |
| 3 | GetAudioController | Returns an #IAudioController. |
| 4 | GetDisplayController | Returns an #IDisplayController. |
| 10 | GetProcessWindingController | Returns an #IProcessWindingController. |
| 11 | GetLibraryAppletCreator | Returns an #ILibraryAppletCreator. |
| 20 | GetOverlayFunctions | Returns an #IOverlayFunctions. |
| 21 | [7.0.0+] GetAppletCommonFunctions | No input, returns an #IAppletCommonFunctions. |
| 1000 | GetDebugFunctions | Returns an #IDebugFunctions. |
IOverlayFunctions
| Cmd | Name |
|---|---|
| 0 | #BeginToWatchShortHomeButtonMessage |
| 1 | #EndToWatchShortHomeButtonMessage |
| 2 | #GetApplicationIdForLogo |
| 3 | #SetGpuTimeSliceBoost |
| 4 | [2.0.0+] #SetAutoSleepTimeAndDimmingTimeEnabled |
| 5 | [2.0.0+] #TerminateApplicationAndSetReason |
| 6 | [3.0.0+] #SetScreenShotPermissionGlobally |
| 10 | [6.0.0+] #StartShutdownSequenceForOverlay |
| 11 | [6.0.0+] #StartRebootSequenceForOverlay |
| 20 | [8.0.0+] #SetHandlingHomeButtonShortPressedEnabled |
| 30 | [9.0.0+] #SetHealthWarningShowingState |
| 90 | [7.0.0+] #SetRequiresGpuResourceUse |
| 101 | [5.0.0+] #BeginToObserveHidInputForDevelop |
BeginToWatchShortHomeButtonMessage
No input/output.
EndToWatchShortHomeButtonMessage
No input/output.
GetApplicationIdForLogo
No input, returns an output u64 titleID.
Gets the application titleID for displaying the logo screen during application launch.
When no application is running, this returns success with titleID=0.
SetGpuTimeSliceBoost
Takes an input u64, no output.
SetAutoSleepTimeAndDimmingTimeEnabled
Takes an input u8 bool, no output.
TerminateApplicationAndSetReason
Takes an input u32 Result, no output.
SetScreenShotPermissionGlobally
Takes an input u8 bool, no output.
StartShutdownSequenceForOverlay
No input/output.
On success, official sw will enter an infinite loop with sleep-thread value 86400000000000.
StartRebootSequenceForOverlay
No input/output.
On success, official sw will enter an infinite loop with sleep-thread value 86400000000000.
SetHandlingHomeButtonShortPressedEnabled
Takes an input u8 bool, no output.
SetHealthWarningShowingState
Takes an input u8 bool, no output.
This writes the input bool into state, signals an Event, and returns 0.
SetRequiresGpuResourceUse
Takes an input u8 bool, no output.
Just returns 0.
BeginToObserveHidInputForDevelop
No input/output.
Sets various state fields and signals an userspace-event.
Enables HID input for the OverlayApplet, without disabling input for the foreground applet.
IApplicationProxy
| Cmd | Name | Notes |
|---|---|---|
| 0 | GetCommonStateGetter | Returns an #ICommonStateGetter. |
| 1 | GetSelfController | Returns an #ISelfController. |
| 2 | GetWindowController | Returns an #IWindowController. |
| 3 | GetAudioController | Returns an #IAudioController. |
| 4 | GetDisplayController | Returns an #IDisplayController. |
| 10 | GetProcessWindingController | Returns an #IProcessWindingController. |
| 11 | GetLibraryAppletCreator | Returns an #ILibraryAppletCreator. |
| 20 | GetApplicationFunctions | Returns an #IApplicationFunctions. |
| 1000 | GetDebugFunctions | Returns an #IDebugFunctions. |
IApplicationFunctions
The BOTW game uses this GamePlayRecording functionality from the main-nso "nninitStartup" function, with size 0x6000000(96MiB). The official GamePlayRecording-enable code does the following(this will panic on any failure):
- Creates TransferMemory using the input buffer and size, with permissions=0.
- Uses #InitializeGamePlayRecording with the TransferMemory.
- Closes the TransferMemory handle, + TransferMemory cleanup.
- Uses #SetGamePlayRecordingState with value 0x1.
This GamePlayRecording functionality presumably enables the video-recording usable starting with 4.0.0.
PopLaunchParameter
Takes an input u32 #LaunchParameterKind, returns an output #IStorage.
Pops a LaunchParameter #IStorage, the storage will be removed from sysmodule state during this.
CreateApplicationAndPushAndRequestToStart
Takes an input u64 titleID and an input #IStorage, no output. titleID=0 can be used to relaunch the current application.
CreateApplicationAndPushAndRequestToStartForQuest
Takes 2 input u32s (loaded from struct #ApplicationAttributeForQuest), an input u64 titleID, and an input #IStorage, no output.
CreateApplicationAndRequestToStart
Takes an input u64 titleID, no output.
Same as #CreateApplicationAndPushAndRequestToStart except without the input storage, official sw uses this when no input storage is specified.
CreateApplicationAndRequestToStartForQuest
Takes 2 input u32s (loaded from struct #ApplicationAttributeForQuest) and an input u64 titleID, no output.
Same as #CreateApplicationAndPushAndRequestToStartForQuest except without the input storage, official sw uses this when no input storage is specified.
CreateApplicationWithAttributeAndPushAndRequestToStartForQuest
Takes an input u64 titleID, a type-0x15 input buffer containing an #ApplicationAttribute, an input #IStorage, no output.
Same as #CreateApplicationAndPushAndRequestToStartForQuest except the entire attributes structure is directly specified via the input buffer. This command replaces #CreateApplicationAndPushAndRequestToStartForQuest, official user-processes no longer use #CreateApplicationAndPushAndRequestToStartForQuest.
CreateApplicationWithAttributeAndRequestToStartForQuest
Takes an input u64 titleID and a type-0x15 input buffer containing an #ApplicationAttribute, no output.
Same as #CreateApplicationAndRequestToStartForQuest except the entire attributes structure is directly specified via the input buffer. This command replaces #CreateApplicationAndRequestToStartForQuest, official user-processes no longer use #CreateApplicationAndPushAndRequestToStartForQuest.
EnsureSaveData
Takes an input u128 userID, returns an output u64 size.
Calls sdk func nn::fs::EnsureApplicationSaveData. qlaunch also calls this same sdk func directly.
Creates the various savedata as specified by the application control.nacp when the savedata doesn't exist.
Official user-processes launch the dataErase LibraryApplet depending on the Result, the above output size is used with this.
GetDesiredLanguage
No input, returns an output LanguageCode.
SetTerminateResult
Takes an input u32 Result, no output.
For example, in some cases official apps use this with error 0x2A2 then uses svcBreak.
GetDisplayVersion
No input, returns an output 0x10-byte struct.
The output struct is "nn::oe::DisplayVersion". This the DisplayVersion string copied from the application control.nacp, this is always NUL-terminated.
GetLaunchStorageInfoForDebug
No input, returns an output u8 StorageId and u8 StorageId.
This returns two u8s loaded from state, these are the same StorageIds from #ApplicationLaunchProperty.
BeginBlockingHomeButtonShortAndLongPressed
Takes an input s64, no output.
Official user-processes use hard-coded value 0 for the s64.
Starts blocking the Home button.
EndBlockingHomeButtonShortAndLongPressed
No input/output.
Ends the blocking started by #BeginBlockingHomeButtonShortAndLongPressed.
BeginBlockingHomeButton
Takes an input s64 nanoseconds, no output. The input nanoseconds can be zero.
EndBlockingHomeButton
No input/output.
NotifyRunning
Takes no input. Returns an output u8 bool, which is ignored by official user-processes.
GetPseudoDeviceId
No input, returns an output 0x10-byte "nn::util::Uuid" struct.
The 0x20-byte output data from GetSystemSeedForPseudoDeviceId followed by the 8-byte SeedForPseudoDeviceId from the current control.nacp, is hashed with SHA1. Then "nn::util::GenerateUuidVersion5" is called with the final hash, the output from this is then returned for the Uuid.
SetMediaPlaybackStateForApplication
Takes an input u8 bool, no output.
IsGamePlayRecordingSupported
No input, returns an output u8 bool.
InitializeGamePlayRecording
Takes a TransferMemory handle and an u64 for the size of the TransferMemory. The size must match 0x6000000 otherwise an error is returned.
SetGamePlayRecordingState
Takes an input u32. 0 = disable/pause, 1 = enable/restart.
RequestFlushGamePlayingMovieForDebug
No input/output.
Requests to save the video recording, as if the Capture-button was held.
RequestToShutdown
No input/output.
On success, official sw will enter an infinite loop with sleep-thread value 86400000000000.
RequestToReboot
No input/output.
On success, official sw will enter an infinite loop with sleep-thread value 86400000000000.
ExitAndRequestToShowThanksMessage
No input/output.
Used to exit the application and return to the kiosk menu. Official sw uses #UnlockExit immediately before this if needed.
On success, official sw will enter an infinite loop with sleep-thread value 86400000000000.
This throws an error when the cached Settings_services#GetQuestFlag value is 0.
EnableApplicationCrashReport
Takes an input u8 bool, no output.
InitializeApplicationCopyrightFrameBuffer
Takes an input TransferMemory handle, an s32 width, an s32 height, an u64 tmem_size, and no output.
tmem_size must be 0x40000-byte aligned. width must be 1-1280, and height must be 1-720.
User-processes create the tmem with an user-specified buffer with permissions=0. width = 1280 and height = 720.
This is used as an overlay for screenshots.
SetApplicationCopyrightImage
Takes a type-0x45 input buffer, an s32 x, an s32 y, an s32 width, an s32 height, an s32 WindowOriginMode, and no output.
The last s32 is "nn::oe::WindowOriginMode". This should be at least 1.
x and y must not have the negative bit set. width and height must not be <1.
Sets the RGBA8 image for use with #InitializeApplicationCopyrightFrameBuffer. Overrides the current image, if this was already used previously.
SetApplicationCopyrightVisibility
Takes an input u8 bool, no output.
Sets the visibility for the image set by #SetApplicationCopyrightImage, in screenshots. By default it's visible.
QueryApplicationPlayStatistics
Takes a type-0x6 output buffer containing an array of ApplicationPlayStatistics and a type-0x5 input buffer containing an array of u64 titleIDs. Returns an output s32 for actual total output entries.
The number of entries in each array is the same.
See also PlayLogQueryCapability.
This uses pdm:qry QueryApplicationPlayStatisticsForSystem.
QueryApplicationPlayStatisticsByUid
Takes a u128 userID, a type-0x6 output buffer containing an array of ApplicationPlayStatistics and a type-0x5 input buffer containing an array of u64 titleIDs. Returns an output s32 for actual total output entries.
Same as #QueryApplicationPlayStatistics except this uses pdm:qry cmd16, to get playstats specific to userIDs.
ExecuteProgram
Takes an input u32 #ProgramSpecifyKind and an input u64, no output.
ClearUserChannel
No input/output.
Clears the UserChannel used by #UnpopToUserChannel.
UnpopToUserChannel
Takes an input #IStorage, no output.
The input storage is pushed to the UserChannel. This is the same channel used by #LaunchParameterKind value 1.
User-processes create a storage using data specified by the user (written to offset=0 size=inputsize), with max size 0x1000. This storage is then used with this cmd.
GetPreviousProgramIndex
No input, returns an output s32.
Gets the ProgramIndex of the Application which launched this title. The output ProgramIndex is -1 when there was no previous title.
EnableApplicationAllThreadDumpOnCrash
Takes an input u8 bool, no output.
GetGpuErrorDetectedSystemEvent
No input, returns an output Event handle with autoclear=false.
This is used by sdknso during applet-application initialization. A separate thread is setup where event-waiting is handled. When the Event is signaled, official sw will assert.
GetFriendInvitationStorageChannelEvent
No input, returns an output Event handle with EventClearMode=0.
This is exposed by sdknso under nn::friends::. This returns a ptr to the cached Event in global state, with the Event being loaded if not previously initialized.
TryPopFromFriendInvitationStorageChannel
No input, returns an output #IStorage.
This uses the same StorageChannel as #PushToFriendInvitationStorageChannel.
This is exposed by sdknso under nn::friends::. When the storage_size is <0x10, this returns false. data_size = storage_size-0x10; Then the first 0x10-bytes from storage are read to stack, which is later copied to the output Uid on success prior to returning. Then the storage is read into the specified output buffer with storage-offset 0x10, where the size is size = data_size > buf_size ? buf_size : data_size. Reading is skipped if size is zero. Afterwards the used size is written to an output param. On success, true is returned.
GetNotificationStorageChannelEvent
No input, returns an output Event handle with EventClearMode=0.
This is exposed by sdknso under nn::notification::. This returns a ptr to the cached Event in global state, with the Event being loaded if not previously initialized.
TryPopFromNotificationStorageChannel
No input, returns an output #IStorage.
This uses the same StorageChannel as #PushToNotificationStorageChannel.
This is exposed by sdknso under nn::notification::. The storage is read into the specified output buffer, where the size is size = storage_size > buf_size ? buf_size : storage_size. Reading is skipped if size is zero. Afterwards the used size is written to an output param.
GetHealthWarningDisappearedSystemEvent
No input, returns an output Event with EventClearMode=0.
SetHdcpAuthenticationActivated
Takes an input u8 bool, no output.
StartContinuousRecordingFlushForDebug
Takes an input s64 nanoseconds-value, returns an output Event handle with autoclear=false.
The cached value loaded from system-setting am.debug!dev_function must be set to 0x1 with size 0x1, otherwise an error is returned.
CreateMovieMaker
Takes an input u64 size and a TransferMemory handle, returns an #IMovieMaker.
Official sw retries using the cmd in a loop on error 0x8D4 with svcSleepThread(100000000) being used first.
Official sw uses permissions=None for the TransferMemory, with an user-specified buffer. The size of the buffer used by official sw is 0x6000000.
PrepareForJit
Takes no input. Launches title 010000000000003B (currently not present on retail systems) if some context variable is not set, with that context variable being initialized afterwards.
IMovieMaker
| Cmd | Name |
|---|---|
| 0 | #GetGrcMovieMaker |
| 1 | #GetLayerHandle |
GetGrcMovieMaker
No input, returns a GRC IMovieMaker.
GetLayerHandle
No input, returns an output u64.
ILibraryAppletCreator
| Cmd | Name | Notes |
|---|---|---|
| 0 | #CreateLibraryApplet | |
| 1 | #TerminateAllLibraryApplets | |
| 2 | #AreAnyLibraryAppletsLeft | |
| 10 | #CreateStorage | |
| 11 | #CreateTransferMemoryStorage | |
| 12 | [2.0.0+] #CreateHandleStorage |
CreateLibraryApplet
Takes 2 input u32s #AppletId and #LibraryAppletMode, returns an #ILibraryAppletAccessor.
TerminateAllLibraryApplets
No input/output.
Stubbed with an ILibraryAppletCreator from #CreateSelfLibraryAppletCreatorForDevelop, just returns an error.
Terminates all LibraryApplets which were created by the current applet (or by the Application when used from the #IApplicationAccessor cmd).
AreAnyLibraryAppletsLeft
No input, returns an output u8 bool.
Stubbed with an ILibraryAppletCreator from #CreateSelfLibraryAppletCreatorForDevelop, just returns an error.
Gets whether any LibraryApplets (#ILibraryAppletAccessor) which were created by the current applet are still open (or by the Application when used from the #IApplicationAccessor cmd).
CreateStorage
Takes an input s64 for the storage size, returns an #IStorage.
This allocates a buffer with the specified size which can then be accessed via #IStorageAccessor.
CreateTransferMemoryStorage
Takes an input TransferMemory copy-handle, an input u8 bool, and an s64 size, returns an #IStorage.
The user-process creates the TransferMemory with permissions=0.
The TransferMemory is mapped, which can then be accessed via #IStorageAccessor. The input bool controls whether writing to the storage is allowed: #Write will throw an error if this flag is not set.
CreateHandleStorage
Takes an input copy-handle and an input s64, returns an #IStorage. In some cases the s64 must not have the negative bit set.
The input can be arbitrary, however official sw is only (?) known to use this for TransferMemory (with s64=size).
ILibraryAppletAccessor
| Cmd | Name | Notes |
|---|---|---|
| 0 | #GetAppletStateChangedEvent | |
| 1 | #IsCompleted | |
| 10 | #Start | |
| 20 | #RequestExit | |
| 25 | #Terminate | |
| 30 | #GetResult | |
| 50 | #SetOutOfFocusApplicationSuspendingEnabled | |
| 100 | #PushInData | |
| 101 | #PopOutData | |
| 102 | #PushExtraStorage | |
| 103 | #PushInteractiveInData | |
| 104 | #PopInteractiveOutData | |
| 105 | #GetPopOutDataEvent | |
| 106 | #GetPopInteractiveOutDataEvent | |
| 110 | #NeedsToExitProcess | |
| 120 | #GetLibraryAppletInfo | |
| 150 | #RequestForAppletToGetForeground | |
| 160 | [2.0.0+] #GetIndirectLayerConsumerHandle |
Commands <=30 are inherited from #IAppletAccessor. GetLibraryAppletInfo is identical to the #ILibraryAppletSelfAccessor cmd.
SetOutOfFocusApplicationSuspendingEnabled
Takes an input u8 bool, no output.
Official sw will assert prior to using this if applet-service was not initialized as *Application.
PushInData
Takes an input #IStorage, no output.
PopOutData
No input, returns an output #IStorage.
PushExtraStorage
Takes an input #IStorage, no output.
PushInteractiveInData
Takes an input #IStorage, no output.
PopInteractiveOutData
No input, returns an output #IStorage.
GetPopOutDataEvent
No input, returns an output handle with autoclear=false.
GetPopInteractiveOutDataEvent
No input, returns an output event handle with autoclear=false.
NeedsToExitProcess
No input, returns an output u8 bool.
Stubbed, just returns an error.
RequestForAppletToGetForeground
No input/output.
Stubbed, just returns an error.
GetIndirectLayerConsumerHandle
Takes an input PID and an input u64 AppletResourceUserId, returns an output u64 IndirectLayerConsumerHandle.
Official sw uses this during LibraryApplet creation when #LibraryAppletMode is 0x3.
ICommonStateGetter
Officially notification messages are handled by the application itself, not sdk-nso in ExeFS. Official apps call code in sdk-nso which basically uses svcWaitSynchronization with the event from #GetEventHandle to check whether a message is available, then if so it uses #ReceiveMessage. The actual handling for message IDs is done in the app itself(see #AppletMessage).
[7.0.0+] User-processes now use BeginVrModeEx/EndVrModeEx instead of #SetVrModeEnabled. Prior to using using BeginVrModeEx, pctl IsStereoVisionPermitted is used and error 0xD08E is thrown if not allowed by pctl.
GetEventHandle
No input. Returns an output event handle. This is signalled when a message is available with #ReceiveMessage.
ReceiveMessage
No input. Returns an output #AppletMessage. Error 0x680 indicates no message is available.
GetThisAppletKind
No input, returns an output #AppletKind.
Stubbed, just returns an error.
AllowToEnterSleep
No input/output.
Stubbed, just returns an error.
DisallowToEnterSleep
No input/output.
Stubbed, just returns an error.
GetOperationMode
No input. Returns an output u8 for the current #OperationMode.
GetPerformanceMode
No input. Returns an output u32 for the current PerformanceMode.
GetCradleStatus
No input, returns an output u8.
This uses #omm GetCradleStatus.
GetBootMode
No input, returns an output u8.
Returns the value from pm:bm GetBootMode.
GetCurrentFocusState
No input. Returns an output u8:
- 1: In focus.
- 2/3: Out of focus(running in "background").
RequestToAcquireSleepLock
No input/output.
ReleaseSleepLock
No input/output.
ReleaseSleepLockTransiently
No input/output.
GetAcquiredSleepLockEvent
No input, returns an output Event handle with autoclear=false.
PushToGeneralChannel
Takes an input #IStorage, no output.
This is not usable under an Application, however it is usable under a LibraryApplet.
Used for sending requests to qlaunch. sdk-nso creates a 0x10-byte storage which is sent to this. The following are the functions which use this, with the data written to the storage:
RequestHomeMenu5341 4d53 0100 0000 0200 0000 0100 0000Returns to the main Home Menu, equivalent to pressing the HOME button.RequestJumpToSystemUpdate5341 4d53 0100 0000 0b00 0000 0100 0000Equivalent to entering "System Update" under System Settings. When leaving this, it returns to the main Home Menu.
GetHomeButtonReaderLockAccessor
No input, returns an output #ILockAccessor.
Similar to using #GetReaderLockAccessorEx with inval=0.
GetReaderLockAccessorEx
Takes an input u32, returns an output #ILockAccessor.
The input value must be 0-3. 0 = HomeButton.
GetWriterLockAccessorEx
Takes an input u32, returns an output #ILockAccessor.
The input value must be 0-3. 0 = HomeButton.
GetCradleFwVersion
No input, returns 4 output u32s.
This uses #omm GetCradleFwVersion.
IsVrModeEnabled
No input, returns an output u8 bool.
SetVrModeEnabled
Takes an input u8 bool flag. No output.
Updates internal AM state fields. If the new state doesn't match the previous state, this uses the Backlight_services {Disable/Enable}VrMode command depending on whether flag={disable/enable}.
When the VrMode is set to true, the console shows a screen rendered like vr asking the user to move his face away and hit the 'close' button. When this button is pressed, the console resets the vrMode to false.
SetLcdBacklighOffEnabled
Takes an input u8 bool, no output.
Sets whether the LCD screen blacklight is turned off.
BeginVrModeEx
No input/output.
Identical to #SetVrModeEnabled except with hard-coded flag=1.
EndVrModeEx
No input/output.
Identical to #SetVrModeEnabled except with hard-coded flag=0.
IsInControllerFirmwareUpdateSection
No input, returns an output u8 bool.
GetDefaultDisplayResolution
No input, returns two output s32s width and height.
GetDefaultDisplayResolutionChangeEvent
No input, returns an output Event handle with autoclear=true.
GetHdcpAuthenticationState
No input, returns an output s32.
GetHdcpAuthenticationStateChangeEvent
No input, returns an output Event handle with autoclear=true.
SetTvPowerStateMatchingMode
Takes an input s32 #TvPowerStateMatchingMode, no output.
GetApplicationIdByContentActionName
Takes a type-0x5 input buffer containing a string, returns an output u64 titleID.
Gets the application titleID for the specified ContentActionName string. Returns an error when the current #AppletId isn't 0x04 (when the current applet isn't a SystemApplication).
SetCpuBoostMode
Takes an input u32 CpuBoostMode (only modes 0 and 1 are valid) and passes it to SetCpuBoostMode.
PerformSystemButtonPressingIfInFocus
Takes an input #SystemButtonType, no output.
Just returns 0 when a state field is not value 1. Verifies that the input button is allowed, then calls the same func as #PerformSystemButtonPressing internally.
SetPerformanceConfigurationChangedNotification
Takes an input u8 bool, no output.
GetCurrentPerformanceConfiguration
No input, returns the result of calling GetCurrentPerformanceConfiguration.
GetOperationModeSystemInfo
No input, returns an output u32.
This returns the output from omm GetOperationModeSystemInfo.
GetSettingsPlatformRegion
No input, returns an output u8.
This just returns the output from setsys GetPlatformRegion.
ISelfController
Exit
No input/output.
Exits the current applet. On success, official sw will enter an infinite loop with sleep-thread value 86400000000000.
LockExit
No input/output.
Locks exit process of pressing X to close in HOME Menu for an application or HOME button for an applet. When locked, it will show the "waiting for software to be closed dialog" until UnlockExit is called or a 15 seconds timeout (when the latter occurs, the process is force-terminated).
UnlockExit
No input/output.
Unlocks exit process, if LockExit was previously used.
EnterFatalSection
No input/output.
LeaveFatalSection
No input/output.
#EnterFatalSection must be executed at least once before executing this command, otherwise error code 0x40080 will be returned. EnterFatalSection and LeaveFatalSection work in pairs, that is, N calls to EnterFatalSection must be performed first in order to perform N executions of LeaveFatalSection. Essentially, these two functions operate like how one would lock and unlock a recursive mutex.
GetLibraryAppletLaunchableEvent
No input, returns an output event handle with autoclear=false.
SetScreenShotPermission
Takes an input s32. No output.
Controls whether screenshot-capture is allowed.
| Value | Description |
|---|---|
| 0 | Inherit from parent applet |
| 1 | Enable |
| 2 | Disable |
SetOperationModeChangedNotification
Takes an input u8 bool flag. No output.
SetPerformanceModeChangedNotification
Takes an input u8 bool flag. No output.
SetFocusHandlingMode
Takes 3 input u8s with each field located immediately after the previous u8, these are bool flags. No output.
SetRestartMessageEnabled
Takes an input u8 bool flag, no output.
See #AppletMessage.
SetScreenShotAppletIdentityInfo
Takes an input #AppletIdentityInfo, no output.
SetOutOfFocusSuspendingEnabled
Takes an input u8 bool flag. No output.
SetControllerFirmwareUpdateSection
Takes an input u8 bool flag, no output.
This throws error 0x40280 when the internal state flag already matches the input value.
SetRequiresCaptureButtonShortPressedMessage
Takes an input u8 bool flag, no output.
See #AppletMessage.
When enabled with a non-Overlay applet, Overlay applet will not be notified of capture button short-presses for screenshots.
SetAlbumImageOrientation
Takes an input u32 "nn::album::ImageOrientation". No output.
The input value must not be >3.
SetDesirableKeyboardLayout
Takes an input u32, no output.
The input u32 is "nn::settings::KeyboardLayout".
CreateManagedDisplayLayer
Returns an output u64 LayerId which is then used by the user-process with Display_services#OpenLayer.
IsSystemBufferSharingEnabled
No input/output.
Not available when the current applet is an Application (#AppletId == 0x01).
Checks whether SystemBufferSharing is enabled, throwing an error otherwise.
No input, returns two output u64s "nn::vi::fbshare::SharedBufferHandle" and "nn::vi::fbshare::SharedLayerHandle".
Runs code similar to #IsSystemBufferSharingEnabled first.
No input, returns an output u64 "nn::vi::fbshare::SharedBufferHandle".
Runs code similar to #IsSystemBufferSharingEnabled first.
Same as #GetSystemSharedLayerHandle except this just gets the SharedBufferHandle.
SetHandlesRequestToDisplay
Takes an input u8 bool, no output.
Sets an internal state flag. When the input flag is 0, this will in additional run the same code as #ApproveToDisplay.
See #AppletMessage.
ApproveToDisplay
No input/output.
Used to handle the notification enabled by #SetHandlesRequestToDisplay.
OverrideAutoSleepTimeAndDimmingTime
Takes 4 input s32s, no output.
SetMediaPlaybackState
Takes an input u8 bool, no output.
SetIdleTimeDetectionExtension
Takes an input u32, no output.
The input value must be 0-2: 0 = disabled, 1 = Extended, and 2 = ExtendedUnsafe.
GetIdleTimeDetectionExtension
No input, returns an output u32.
Returns the value set by #SetIdleTimeDetectionExtension.
SetInputDetectionSourceSet
Takes an input u32, no output.
ReportUserIsActive
No input/output.
Uses idle:sys ReportUserIsActive.
Reports that the user is active, for idle detection (screen dimming / auto-sleep). This is equivalent to when the user uses HID input.
GetCurrentIlluminance
No input, returns an output float.
Uses lbl command GetAmbientLightSensorValue, where only the output float is used.
IsIlluminanceAvailable
No input, returns an output u8 bool.
Uses lbl command IsAmbientLightSensorAvailable.
User-processes can use this to determine whether to continue with using GetCurrentIlluminance(Ex).
SetAutoSleepDisabled
Takes an input u8 bool, no output.
IsAutoSleepDisabled
No input, returns an output u8 bool.
ReportMultimediaError
Takes an input Result and a type-0x5 input buffer, no output.
The buffer contains a 0x138-byte "movie::MultimediaTelemetryReport" struct.
GetCurrentIlluminanceEx
No input, returns an output u8 bool and float.
Uses lbl command GetAmbientLightSensorValue.
SetInputDetectionPolicy
Takes an input #InputDetectionPolicy, no output.
SetWirelessPriorityMode
Takes an input s32 enum WirelessPriorityMode, no output.
The input value must be 1 or 2.
GetAccumulatedSuspendedTickValue
No input, returns an output u64 tick value.
Gets the total time in ticks that the process was suspended, relative to when the applet-service was last initialized.
GetAccumulatedSuspendedTickChangedEvent
No input, returns an output Event handle with autoclear=true.
This is signaled when the output from #GetAccumulatedSuspendedTickValue is updated.
SetAlbumImageTakenNotificationEnabled
Takes an input u8 bool, no output.
See #AppletMessage.
SetApplicationAlbumUserData
Takes a type-0x21 input buffer, no output.
The buffer contains arbitrary UserData.
The size must be <=0x400. The input buffer is copied to a buffer loaded from a state ptr (throwing an error when the state ptr is not set), with the u32 size being written to statebuf+0x400 afterwards.
GetDebugStorageChannel
No input, returns an output #IStorageChannel.
The cached value loaded from system-setting am.debug!dev_function must be set to 0x1 with size 0x1, otherwise an error is returned.
IStorageChannel
Added with 7.0.0.
| Cmd | Name | Notes |
|---|---|---|
| 0 | Push | No input, returns an output #IStorage. |
| 1 | Unpop | No input, returns an output #IStorage. |
| 2 | Pop | No input, returns an output #IStorage. |
| 3 | GetPopEventHandle | No input, returns an output handle. |
| 4 | Clear | No input/output. |
IWindowController
| Cmd | Name | Notes |
|---|---|---|
| 0 | #CreateWindow | |
| 1 | #GetAppletResourceUserId | |
| 2 | [6.0.0+] #GetAppletResourceUserIdOfCallerApplet | |
| 10 | #AcquireForegroundRights | |
| 11 | #ReleaseForegroundRights | |
| 12 | #RejectToChangeIntoBackground | |
| 20 | [7.0.0+] #SetAppletWindowVisibility | |
| 21 | [7.0.0+] #SetAppletGpuTimeSlice |
CreateWindow
Takes an input u32, returns an output #IWindow.
Stubbed, just returns an error.
GetAppletResourceUserId
No input, returns an output u64 #AppletResourceUserId.
GetAppletResourceUserIdOfCallerApplet
No input, returns an output u64 #AppletResourceUserId.
AcquireForegroundRights
No input/output.
Just returns 0.
ReleaseForegroundRights
No input/output.
Just returns 0.
RejectToChangeIntoBackground
No input/output.
Just returns 0.
SetAppletWindowVisibility
Takes an input u8 bool, no output.
SetAppletGpuTimeSlice
Takes an input s64, no output.
The input s64 must not be negative.
IAudioController
| Cmd | Name |
|---|---|
| 0 | #SetExpectedMasterVolume |
| 1 | #GetMainAppletExpectedMasterVolume |
| 2 | #GetLibraryAppletExpectedMasterVolume |
| 3 | #ChangeMainAppletMasterVolume |
| 4 | #SetTransparentVolumeRate |
GetMainAppletExpectedMasterVolume/SetExpectedMasterVolume are used for saving/restoring state for LibraryApplet launching, with SetExpectedMasterVolume being used with new state prior to launching a LibraryApplet. With official sw these applet funcs are used directly in the main-codebin.
SetExpectedMasterVolume
Takes two input floats, no output.
Writes the input floats to state: first one is used by #GetMainAppletExpectedMasterVolume, second one is used by #GetLibraryAppletExpectedMasterVolume.
GetMainAppletExpectedMasterVolume
No input, returns an output float.
GetLibraryAppletExpectedMasterVolume
No input, returns an output float.
ChangeMainAppletMasterVolume
Takes an input float and an input u64, no output.
SetTransparentVolumeRate
Takes an input float, no output.
IDisplayController
GetLastForegroundCaptureImage
Takes a type-0x6 output buffer.
Stubbed, just returns an error.
UpdateLastForegroundCaptureImage
No input/output.
GetLastApplicationCaptureImage
Takes a type-0x6 output buffer.
Stubbed, just returns an error.
GetCallerAppletCaptureImage
Takes a type-0x6 output buffer.
Stubbed, just returns an error.
UpdateCallerAppletCaptureImage
No input/output.
Calls the same func internally as #UpdateLastForegroundCaptureImage, except this passes param value 2 instead of 1.
GetLastForegroundCaptureImageEx
Takes a type-0x6 output buffer, returns an output u8 bool.
The buffer size must match 0x384000.
GetLastApplicationCaptureImageEx
Takes a type-0x6 output buffer, returns an output u8 bool.
The buffer size must match 0x384000.
Calls the same internal func as #GetLastForegroundCaptureImageEx, except that the last param is set to value 0 instead of 1.
GetCallerAppletCaptureImageEx
Takes a type-0x6 output buffer, returns an output u8 bool.
The buffer size must match 0x384000.
Calls the same internal func as #GetLastForegroundCaptureImageEx, except that the last param is set to value 2 instead of 1.
TakeScreenShotOfOwnLayer
Takes an input u8 bool and a s32, no output.
CopyBetweenCaptureBuffers
Takes two input s32s, no output.
AcquireLastApplicationCaptureBuffer
No input, returns an output handle.
Stubbed, just returns an error.
ReleaseLastApplicationCaptureBuffer
No input/output.
Clears a state field if it's not already 0, returning an error otherwise. On newer sysvers: then a func is called which just returns 0, then this cmd returns 0.
AcquireLastForegroundCaptureBuffer
No input, returns an output handle.
Stubbed, just returns an error.
ReleaseLastForegroundCaptureBuffer
No input/output.
Same as #ReleaseLastApplicationCaptureBuffer except with a different state field + different input param for the called func.
AcquireCallerAppletCaptureBuffer
No input, returns an output handle.
Stubbed, just returns an error.
ReleaseCallerAppletCaptureBuffer
No input/output.
Same as #ReleaseLastApplicationCaptureBuffer except with a different state field + different input param for the called func.
AcquireLastApplicationCaptureBufferEx
No input, returns an output TransferMemory handle and an output u8 bool.
The state field used by #ReleaseLastApplicationCaptureBuffer must be 0. Calls a func which just returns an error (this is only the case on newer sysvers), hence this cmd will just return that error. If that func would have returned successfully, the state field would be set to 1 and the cmd would return 0.
On old sysvers, the output TransferMemory is size 0x384000 with permissions=RW.
AcquireLastForegroundCaptureBufferEx
No input, returns an output TransferMemory handle and an output u8 bool.
Same as #AcquireLastApplicationCaptureBufferEx except this uses the #ReleaseLastForegroundCaptureBuffer state field, and uses a different input param value for the called func.
AcquireCallerAppletCaptureBufferEx
No input, returns an output TransferMemory handle and an output u8 bool.
Same as #AcquireLastApplicationCaptureBufferEx except this uses the #ReleaseCallerAppletCaptureBuffer state field, and uses a different input param value for the called func.
ClearCaptureBuffer
Takes an input u8 bool, an s32, and an u32, returns no output.
ClearAppletTransitionBuffer
Takes an input u32, no output.
No input, returns an output u8 bool and an s32.
This loads data from state.
No input/output.
Depending on whether a state field is 0, this just returns an error or returns 0.
No input, returns an output u8 bool and an s32.
Calls the same func internally as #AcquireLastApplicationCaptureSharedBuffer, except this passes value 1 for the last param instead of 0.
No input/output.
Calls the same func internally as #ReleaseLastApplicationCaptureSharedBuffer, except this passes value 1 for the last param instead of 0.
No input, returns an output u8 bool and an s32.
Calls the same func internally as #AcquireLastApplicationCaptureSharedBuffer, except this passes value 2 for the last param instead of 0.
No input/output.
Calls the same func internally as #ReleaseLastApplicationCaptureSharedBuffer, except this passes value 2 for the last param instead of 0.
TakeScreenShotOfOwnLayerEx
Takes two input u8 bools and a s32, no output.
Calls the same func internally as #TakeScreenShotOfOwnLayer, except the last bool param is the last cmd param bool instead of hard-coded 0. This flag indicates whether the screenshot should be taken Immediately.
ISystemAppletControllerForDebug
| Cmd | Name | Notes |
|---|---|---|
| 1 | RequestLaunchApplicationForDebug | |
| 2 | [7.0.0+] GetDebugStorageChannel | No input, returns an output #IStorageChannel. |
| 3 | [7.0.0+] CreateStorageForDebug | Takes a total of 8-bytes of input, returns an #IStorage. |
IProcessWindingController
| Cmd | Name | Notes |
|---|---|---|
| 0 | #GetLaunchReason | |
| 11 | #OpenCallingLibraryApplet | |
| 21 | #PushContext | |
| 22 | #PopContext | |
| 23 | #CancelWindingReservation | |
| 30 | #WindAndDoReserved | |
| 40 | #ReserveToStartAndWaitAndUnwindThis | |
| 41 | [4.0.0+] #ReserveToStartAndWait |
GetLaunchReason
No input, returns an output #AppletProcessLaunchReason.
Used by LibraryApplets.
OpenCallingLibraryApplet
No input, returns an output #ILibraryAppletAccessor.
The objptr from state is cleared during this, an error is thrown if it's already 0.
PushContext
Takes an input #IStorage, no output.
PopContext
No input, returns an output #IStorage.
CancelWindingReservation
No input/output.
WindAndDoReserved
No input/output.
ReserveToStartAndWaitAndUnwindThis
Takes an input #ILibraryAppletAccessor, no output.
ReserveToStartAndWait
Takes an input #ILibraryAppletAccessor, no output.
IDebugFunctions
| Cmd | Name | Notes |
|---|---|---|
| 0 | #NotifyMessageToHomeMenuForDebug | |
| 1 | #OpenMainApplication | |
| 10 | #PerformSystemButtonPressing | |
| 20 | #InvalidateTransitionLayer | |
| 30 | [6.0.0+] #RequestLaunchApplicationWithUserAndArgumentForDebug | |
| 40 | [6.0.0+] #GetAppletResourceUsageInfo | |
| 100 | [7.0.0+] #SetCpuBoostModeForApplet | |
| 110 | [9.0.0+] #PushToAppletBoundChannelForDebug | |
| 111 | [9.0.0+] #TryPopFromAppletBoundChannelForDebug | |
| 120 | [9.0.0+] #AlarmSettingNotificationEnableAppEventReserve | |
| 121 | [9.0.0+] #AlarmSettingNotificationDisableAppEventReserve | |
| 122 | [9.0.0+] #AlarmSettingNotificationPushAppEventNotify | |
| 130 | [9.0.0+] #FriendInvitationSetApplicationParameter | |
| 131 | [9.0.0+] #FriendInvitationClearApplicationParameter | |
| 132 | [9.0.0+] #FriendInvitationPushApplicationParameter |
NotifyMessageToHomeMenuForDebug
Takes an input #AppletMessage, no output.
Stubbed, just returns an error.
OpenMainApplication
No input, returns an output #IApplicationAccessor.
Should not be used when no Application is running (svcBreak).
PerformSystemButtonPressing
Takes an input #SystemButtonType, no output.
InvalidateTransitionLayer
No input/output.
RequestLaunchApplicationWithUserAndArgumentForDebug
Takes an input u8 bool flag, an u64 Application titleID, a type-0x5 input buffer containing an array of u128 userIDs, and a type-0x5 input buffer, no output.
Requests to launch the specified Application, with the specified users. When the bool flag is true, the content of the second input buffer is used to create a storage which is pushed to the UserChannel for this Application (see #LaunchParameterKind).
GetAppletResourceUsageInfo
No input, returns an output #AppletResourceUsageInfo.
SetCpuBoostModeForApplet
Takes an input u32 CpuBoostMode (only modes 0 and 1 are valid) and passes it to SetCpuBoostMode.
The cached value loaded from Settings_services#GetDebugModeFlag must be 1, otherwise an error is returned.
PushToAppletBoundChannelForDebug
Takes an input #IStorage and a s32, no output.
The cached value loaded from Settings_services#GetDebugModeFlag must be 1, otherwise an error is returned.
The s32 must match the value already stored in state when the state value is non-zero, otherwise an error is returned. When the state value is 0, the s32 is written into state. Then input storage is pushed to the StorageChannel.
TryPopFromAppletBoundChannelForDebug
Takes an input s32, returns an output #IStorage.
The cached value loaded from Settings_services#GetDebugModeFlag must be 1, otherwise an error is returned.
The s32 must not be 0 and must match the value previously saved by #PushToAppletBoundChannelForDebug, otherwise errors are returned. Then the output storage is popped from the StorageChannel.
AlarmSettingNotificationEnableAppEventReserve
Takes an input #IStorage and an u64 nn::ncm::ApplicationId, no output.
Clears a StorageChannel, pushes the input storage there, and writes the ApplicationId into state.
AlarmSettingNotificationDisableAppEventReserve
No input/output.
Clears the StorageChannel/saved-ApplicationId used by #AlarmSettingNotificationEnableAppEventReserve.
AlarmSettingNotificationPushAppEventNotify
Takes an input #IStorage, no output.
Same as #PushToNotificationStorageChannel except this uses the MainApplication.
FriendInvitationSetApplicationParameter
Takes an input #IStorage and an u64 nn::ncm::ApplicationId, no output.
Clears a StorageChannel, pushes the input storage there, and writes the ApplicationId into state.
FriendInvitationClearApplicationParameter
No input/output.
Clears the StorageChannel/saved-ApplicationId used by #FriendInvitationSetApplicationParameter.
FriendInvitationPushApplicationParameter
Takes an input #IStorage, no output.
Same as #PushToFriendInvitationStorageChannel except this uses the MainApplication.
IStorage
| Cmd | Name | Notes |
|---|---|---|
| 0 | Open | No input. Returns an #IStorageAccessor. |
| 1 | [2.0.0+] OpenTransferStorage | No input. Returns an #ITransferStorageAccessor. |
Open can only be used when the IStorage was created by #CreateStorage or #CreateTransferMemoryStorage. OpenTransferStorage can only be used when the IStorage was created by #CreateHandleStorage.
Only 1 *Accessor session can be open for each IStorage at a time.
IStorageAccessor
| Cmd | Name | Notes |
|---|---|---|
| 0 | GetSize | No input. Returns an s64. |
| 10 | Write | Takes an input s64 and a type-0x21 input buffer. |
| 11 | Read | Takes an input s64 and a type-0x22 output buffer. |
ITransferStorageAccessor
| Cmd | Name | Notes |
|---|---|---|
| 0 | GetSize | No input. Returns an output s64. |
| 1 | GetHandle | No input. Returns an output s64 and handle. |
These commands return the data originally from #CreateHandleStorage input, both return the same s64.
appletOE
This is "nn::am::service::IApplicationProxyService".
| Cmd | Name | Notes |
|---|---|---|
| 0 | #OpenApplicationProxy |
This is used by all regular-applications, including flog and "Retail Interactive Display Menu". Only one session can be open for this service at a time.
OpenApplicationProxy
Returns an #IApplicationProxy. See #appletAE.
Takes a reserved input u64 (official user-processes use hard-coded value 0), a PID, and a process copy-handle (cur-proc handle alias).
On failure, official user-processes will retry using this command in a loop while the retval is 0x19280, with svcSleepThread(10000000) being called first.
idle:sys
This is "nn::idle::detail::IPolicyManagerSystem"
| Cmd | Name |
|---|---|
| 0 | GetAutoPowerDownEvent |
| 1 | [1.0.0-3.0.2] |
| [7.0.0+] IsAutoPowerDownRequested | |
| 2 | [1.0.0-3.0.2] |
| 3 | #SetHandlingContext |
| 4 | LoadAndApplySettings |
| 5 | ReportUserIsActive |
SetHandlingContext
[3.0.0+] Now takes an additional 0x10-bytes of input.
omm
This is "nn::omm::detail::IOperationModeManager"
Operation Mode Manager (OMM) is a service responsible for arbitrating the operation changes between docked and handheld modes. Besides PTM, this is the only service that interacts with the Dock through usb:pd*.
| Cmd | Name |
|---|---|
| 0 | GetOperationMode |
| 1 | GetOperationModeChangeEvent |
| 2 | EnableAudioVisual |
| 3 | DisableAudioVisual |
| 4 | EnterSleepAndWait |
| 5 | GetCradleStatus |
| 6 | FadeInDisplay |
| 7 | FadeOutDisplay |
| 8 | [2.0.0+] GetCradleFwVersion |
| 9 | [2.0.0+] NotifyCecSettingsChanged |
| 10 | [3.0.0+] SetOperationModePolicy |
| 11 | [3.0.0+] GetDefaultDisplayResolution |
| 12 | [3.0.0+] GetDefaultDisplayResolutionChangeEvent |
| 13 | [3.0.0+] UpdateDefaultDisplayResolution |
| 14 | [3.0.0+] ShouldSleepOnBoot |
| 15 | [4.0.0+] NotifyHdcpApplicationExecutionStarted |
| 16 | [4.0.0+] NotifyHdcpApplicationExecutionFinished |
| 17 | [4.0.0+] NotifyHdcpApplicationDrawingStarted |
| 18 | [4.0.0+] NotifyHdcpApplicationDrawingFinished |
| 19 | [4.0.0+] GetHdcpAuthenticationFailedEvent |
| 20 | [4.0.0+] GetHdcpAuthenticationFailedEmulationEnabled |
| 21 | [4.0.0+] SetHdcpAuthenticationFailedEmulation |
| 22 | [4.0.0+] GetHdcpStateChangeEvent |
| 23 | [4.0.0+] GetHdcpState |
| 24 | [5.0.0+] ShowCardUpdateProcessing |
| 25 | [5.0.0+] SetApplicationCecSettingsAndNotifyChanged |
| 26 | [7.0.0+] #GetOperationModeSystemInfo |
| 27 | [9.0.0+] GetAppletFullAwakingSystemEvent |
GetOperationModeSystemInfo
No input, returns an output u32.
This is used by ICommonStateGetter GetOperationModeSystemInfo.
spsm
This is "nn::spsm::detail::IPowerStateInterface".
| Cmd | Name |
|---|---|
| 0 | GetCurrentState |
| 1 | EnterSleep |
| 2 | GetLastWakeReason |
| 3 | Shutdown |
| 4 | GetNotificationMessageEventHandle |
| 5 | ReceiveNotificationMessage |
| 6 | AnalyzeLogForLastSleepWakeSequence |
| 7 | ResetEventLog |
| 8 | AnalyzePerformanceLogForLastSleepWakeSequence |
| 9 | ChangeHomeButtonLongPressingTime |
| 10 | PutErrorState |
| 11 | [1.0.0-3.0.2] InvalidateCurrentHomeButtonPressing |
[3.0.0+] Cmd11 now takes a total of 8-bytes of input.
tcap
This is "nn::tcap::server::IManager".
| Cmd | Name |
|---|---|
| 0 | GetContinuousHighSkinTemperatureEvent |
| 1 | SetOperationMode |
| 2 | LoadAndApplySettings |
caps:su
This is "nn::capsrv::sf::IScreenShotApplicationService".
This was added with 6.0.0.
This can be used by applications to save screenshots.
| Cmd | Name | Notes |
|---|---|---|
| 32 | [7.0.0+] SetShimLibraryVersion | Takes a total of 0x10-bytes of input and a PID, no output. |
| 201 | SaveScreenShot | |
| 203 | SaveScreenShotEx0 | |
| 205 | [8.0.0+] SaveScreenShotEx1 | |
| 210 | SaveScreenShotEx2 | Takes a total of 0x50-bytes of input, a type-0x15 input buffer, and a type-0x45 input buffer. Returns a total of 0x20-bytes of output. |
SetShimLibraryVersion is a wrapper for caps:c cmd33. Commands SaveScreenShot, SaveScreenShotEx0, SaveScreenShotEx1 and SaveScreenShotEx2 are wrappers for caps:sc cmd210.
SaveScreenShot
Takes two input u32s, an u64 AppletResourceUserId, a PID, and a type-0x45 input buffer containing image data. Returns an ApplicationAlbumEntry.
Official user-processes doesn't use this, instead #SaveScreenShotEx0 is used: ScreenShotAttributeEx0 is all-zero, except +4 is set to an input u32 and u32 +0xC = 0x1.
This cmd internally uses an all-zero ScreenShotAttributeEx0, with u32 +0 = input u32 and u32 +0x8 = 0x3.
SaveScreenShotEx0
Takes an input 0x40-byte struct ScreenShotAttributeEx0, an input u32, an input u64 AppletResourceUserId, a PID, and a type-0x45 input buffer containing image data. Returns an ApplicationAlbumEntry.
SaveScreenShotEx1
Takes an input 0x40-byte struct ScreenShotAttributeEx0, an input u32, an input u64 AppletResourceUserId, a PID, a type-0x15 input buffer containing an ApplicationData, and a type-0x45 input buffer containing image data. Returns an ApplicationAlbumEntry.
SaveScreenShotEx2
Takes an input 0x40-byte struct ScreenShotAttributeEx0, an input u32, an input u64 AppletResourceUserId, a type-0x15 input buffer containing an UserIdList, and a type-0x45 input buffer containing image data. Returns an ApplicationAlbumEntry.
Library Applets
This section documents library applet launching.
Before starting the applet, #IStorages are created and written, then passed to #ILibraryAppletAccessor PushInData. The #IStorage session is closed afterwards. The first #IStorage is #CommonArguments, followed by any applet-specific #IStorages.
Once the applet finishes running successfully, #ILibraryAppletAccessor PopOutData can be used to get the applet-specific #IStorage containing the applet output data.
CommonArguments
The first IStorage passed to applets should contain the common library applet arguments. This is populated by nn::la::CommonArgumentsWriter and has the following format.
This struct is 0x20-bytes.
Official sw handles the first 8-bytes separately, which is a header. With CommonArguments version 0x0, the header is 4-bytes, while starting with version 0x1 it's 8-bytes.
| Offset | Size | Typical Value | Notes |
|---|---|---|---|
| 0x0 | 4 | 1 | Common Arguments version |
| 0x4 | 4 | 0x20 | Common Arguments size |
| 0x8 | 4 | Library applet version (API version) | |
| 0xC | 4 | 0 | Theme color |
| 0x10 | 1 | 0 | Play startup sound |
| 0x18 | 8 | N/A | System tick (see svcGetSystemTick) |
Enums
AppletId
See also Category:Library Applets.
| ID | Title-id | Description |
|---|---|---|
| 0x01 | Application. Not valid for use with LibraryApplets. | |
| 0x02 | 010000000000100C | "overlayDisp" |
| 0x03 | 0100000000001000 | "qlaunch" |
| 0x04 | 0100000000001012 | "starter" SystemApplication. |
| 0x0A | 0100000000001001 | "auth" |
| 0x0B | 0100000000001002 | "cabinet" |
| 0x0C | 0100000000001003 | "controller" |
| 0x0D | 0100000000001004 | "dataErase" |
| 0x0E | 0100000000001005 | "error" |
| 0x0F | 0100000000001006 | "netConnect" |
| 0x10 | 0100000000001007 | "playerSelect" |
| 0x11 | 0100000000001008 | "swkbd" |
| 0x12 | 0100000000001009 | "miiEdit" |
| 0x13 | 010000000000100A | "LibAppletWeb" WebApplet applet |
| 0x14 | 010000000000100B | "LibAppletShop" ShopN applet |
| 0x15 | 010000000000100D | "photoViewer" |
| 0x16 | 010000000000100E | "set" |
| 0x17 | 010000000000100F | "LibAppletOff" Offline applet |
| 0x18 | 0100000000001010 | "LibAppletLns" Whitelisted applet |
| 0x19 | 0100000000001011 | "LibAppletAuth" WifiWebAuth applet |
| 0x1A | 0100000000001013 | "myPage" |
LibraryAppletMode
| ID | Description |
|---|---|
| 0x0 | AllForeground |
| 0x1 | Background |
| 0x2 | No UI |
| 0x3 | Background with indirect display, see also #GetIndirectLayerConsumerHandle. Only used by swkbd InlineKeyboard. |
| 0x4 | AllForegroundInitiallyHidden. Can be used by [7.0.0+] WebSession. |
AppletMessage
| ID | Description |
|---|---|
| 0x4 | Exit requested |
| 0xF | FocusState changed |
| 0x10 | Current applet execution was resumed. |
| 0x1E | OperationMode changed |
| 0x1F | PerformanceMode changed |
| 0x33 | RequestToDisplay. Indicates that #ApproveToDisplay should be used. |
| 0x5A | Capture button was short-pressed. |
| 0x5C | Screenshot was taken. |
This is "nn::am::AppletMessage".
OperationMode
| Value | Description |
|---|---|
| 0 | Handheld |
| 1 | Docked |
TvPowerStateMatchingMode
| Value | Description |
|---|---|
| 0 | Unknown |
| 1 | Unknown |
This is "nn::oe::TvPowerStateMatchingMode". This is used with #SetTvPowerStateMatchingMode.
SystemButtonType
| Value | Description |
|---|---|
| 1 | PerformHomeButtonShortPressing |
| 2 | PerformHomeButtonLongPressing |
| 3 | Short-pressing with the Power-button. Only available with #PerformSystemButtonPressing. |
| 4 | Long-pressing with the Power-button. Only available with #PerformSystemButtonPressing. |
| 5 | Shutdown the system. Only available with #PerformSystemButtonPressing. |
| 6 | PerformCaptureButtonShortPressing |
| 7 | PerformCaptureButtonLongPressing |
This is "nn::am::service::SystemButtonType". This is used with #PerformSystemButtonPressingIfInFocus/#PerformSystemButtonPressing.
LaunchParameterKind
| Value | Description |
|---|---|
| 1 | UserChannel. Application-specific LaunchParameter. |
| 2 | account PreselectedUser |
| 3 | Unknown if used by anything? |
LibraryAppletExitReason
| Value | Description |
|---|---|
| 0 | Normal |
| 1 | Canceled |
| 2 | Abnormal |
| 10 | Unexpected |
ProgramSpecifyKind
| Value | Description |
|---|---|
| 0 | u8 ProgramIndex. "ExecuteProgram". NS handles ProgramIndex by launching titleID {application_titleID}+ProgramIndex. After using #ExecuteProgram with this successfully, official user-processes will enter an infinite loop with sleep-thread value 86400000000000. |
| 1 | u64 titleID. "JumpToSubApplicationProgramForDevelopment". Only available when DebugMode is 1. |
| 2 | u64 = value 0. "RestartProgram" |
This is "nn::am::service::ProgramSpecifyKind". This controls the type of the u64 passed to #ExecuteProgram.
ProgramIndex values where the title is not installed should not be used: qlaunch will display an error message and the current title will become "corrupted", however Home Menu will have an option to repair it.
InputDetectionPolicy
| Value | Description |
|---|---|
| 0 | Unknown. |
| 1 | Unknown. |
This is u32 enum "nn::applet::InputDetectionPolicy".
AppletResourceUserId
This u64 is officially called "nn::applet::AppletResourceUserId". Used by a number of non-AM services.
AppletAttribute
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x1 | Flag. When non-zero, two state fields are set to 1. |
| 0x1 | 0x7F | Unused |
This is "nn::am::AppletAttribute". This struct is 0x8-bytes.
This is used by #OpenLibraryAppletProxy.
AppletProcessLaunchReason
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x1 | Flag. When non-zero, LibraryApplets then use #OpenCallingLibraryApplet. |
| 0x1 | 0x2 | Always 0. |
| 0x3 | 0x1 | Always 0. |
This is "nn::am::service::AppletProcessLaunchReason". This struct is 0x4-bytes.
LibraryAppletInfo
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | #AppletId |
| 0x4 | 0x4 | #LibraryAppletMode |
This is "nn::am::service::LibraryAppletInfo". This struct is 0x8-bytes.
AppletKind
This is "nn::am::service::AppletKind". This is 8-bytes.
AppletIdentityInfo
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | #AppletId |
| 0x4 | 0x4 | Padding |
| 0x8 | 0x8 | titleID |
This struct is "nn::am::service::AppletIdentityInfo". This struct is 0x10-bytes.
ApplicationAttributeForQuest
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | See #ApplicationAttribute. |
| 0x4 | 0x4 | See #ApplicationAttribute. |
| 0x8 | 0x4 | [7.0.0+] See #ApplicationAttribute. |
This struct is "nn::applet::ApplicationAttributeForQuest".
User-processes copy the first 0x8-bytes (0xC-bytes with #CreateApplicationWithAttributeAndPushAndRequestToStartForQuest/#CreateApplicationWithAttributeAndRequestToStartForQuest) to a #ApplicationAttribute with the rest of the struct being cleared, which is then passed to the actual cmd (CreateApplication*ToStartForQuest).
ApplicationAttribute
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | Default is 0 for non-Quest. Only used when non-zero: unknown value in seconds. |
| 0x4 | 0x4 | Default is 0 for non-Quest. Only used when non-zero: unknown value in seconds. |
| 0x8 | 0x4 | float audio volume. Must be in the range of 0.0f-1.0f. The default is 1.0f. |
| 0xC | 0x14 | Unused. Default is 0. |
This struct is "nn::am::ApplicationAttribute". This struct is 0x20-bytes.
Internally AM only uses the first 0xC-bytes from ApplicationAttribute, regardless of the cmd.
ApplicationLaunchProperty
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x8 | Application titleID. |
| 0x8 | 0x4 | Application title-version. |
| 0xC | 0x1 | StorageId for the Application base title. |
| 0xD | 0x1 | StorageId for the Application update title. |
| 0xE | 0x1 | Unknown. |
| 0xF | 0x1 | Padding. |
This struct is 0x10-bytes.
ApplicationLaunchRequestInfo
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | Unknown. The default is 0x0 with #CreateSystemApplication, 0x3 with #CreateApplication. |
| 0x4 | 0x4 | Unknown. The default is 0x0 with #CreateSystemApplication, 0x3 with #CreateApplication. |
| 0x8 | 0x8 | Unknown. The default is 0x0. |
This struct is "nn::applet::ApplicationLaunchRequestInfo". This struct is 0x10-bytes.
AppletResourceUsageInfo
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | Unknown counter. |
| 0x4 | 0x4 | Unknown counter. |
| 0x8 | 0x4 | Output from NS GetRightsEnvironmentCountForDebug. |
| 0xC | 0x14 | Always zero. |
This struct is "nn::am::service::AppletResourceUsageInfo". This struct is 0x20-bytes.
Notes
AM-sysmodule will only initialize pdm:ntfy / use pdm:ntfy service commands when the value from pm:bm GetBootMode is not 0x1.