4,620
edits
Changes
Jump to navigation
Jump to search
Line 1,096:
Line 1,096: − + Line 1,114:
Line 1,114: − +
→ldn
Then the Station scans for an [[#ActionFrame]] for loading the [[#NetworkInfo]].
Then the Station scans for an [[#ActionFrame]] for loading the [[#NetworkInfo]].
Once connected, the Station must Authenticate with the AccessPoint, this is custom. The Station sends a frame (a maximum of 3 times in some cases if errors occur, with the same data), and the AccessPoint sends a response. Once Authenticated, the node is added to the [[#NodeInfo]] array in [[#NetworkInfo]]. If the Station does not successfully Authenticate X-seconds after connecting, the AccessPoint disconnects the Station. If the Station fails to Authenticate, the Station itself will disconnect as well.
Once connected, the AccessPoint sends Epigram-vendor Action frame(s) (same data) to the Station, the Station doesn't require these frames: <code>dd1afeedfacedeadbeef010000000a00000000000000000000000000</code>. Then the Station must Authenticate with the AccessPoint, this is custom. The Station sends a frame (a maximum of 3 times in some cases if errors occur, with the same data), and the AccessPoint sends a response. Once Authenticated, the node is added to the [[#NodeInfo]] array in [[#NetworkInfo]]. If the Station does not successfully Authenticate X-seconds after connecting, the AccessPoint disconnects the Station. If the Station fails to Authenticate, the Station itself will disconnect as well.
After Authentication the Station will scan for another [[#ActionFrame]], with frame-comparision enabled with the above frame (frame must have been updated since the previous scan). The Station locates the index for a [[#MacAddress]] matching itself in the [[#NetworkInfo]] [[#NodeInfo]] array (the entry for the AccessPoint is skipped), throwing an error if not found. After validating the LocalCommunicationVersion, it proceeds to handle ARP setup below.
After Authentication the Station will scan for another [[#ActionFrame]], with frame-comparision enabled with the above frame (frame must have been updated since the previous scan). The Station locates the index for a [[#MacAddress]] matching itself in the [[#NetworkInfo]] [[#NodeInfo]] array (the entry for the AccessPoint is skipped), throwing an error if not found. After validating the LocalCommunicationVersion, it proceeds to handle ARP setup below.
*** 0x0103: ?
*** 0x0103: ?
* The first byte of Data is value 0, then the ProtocolID-specific data follows, see below.
* The first byte of Data is value 0, then the ProtocolID-specific data follows, see below.
** ProtocolID 0x0103 frames are sent by the AccessPoint to the Station. This is 0x20-bytes of zeros, except for the first byte which is 0x3. This is sent by the AccessPoint prior to destroying the network?
** ProtocolID 0x0103 frames are sent by the AccessPoint to the Station. This is 0x20-bytes of zeros, except for the first byte which is 0x3. This is sent by the AccessPoint prior to destroying the network.
==== Authentication ====
==== Authentication ====