Line 133: |
Line 133: |
| |} | | |} |
| | | |
− | Before fuse reading/writing the power down mode must be disabled.
| + | FUSE_FUSECTRL_CMD takes the fuse controller's operation mode. READ and WRITE interact directly with the hardware fuse bitmap while SENSE_CTRL flushes programmed values into the [[Fuses#Cache_registers|cache registers]]. |
− | SENSE_CTRL mode flushes programmed values into the [[Fuses#Cache_registers|cache registers]]. | + | |
| + | FUSE_FUSECTRL_STATE returns the current state of the fuse controller. |
| + | |
| + | FUSE_FUSECTRL_MARGIN_READ changes the fuse read trip point setting to margin read mode. |
| + | |
| + | FUSE_FUSECTRL_RWL selects the fuse redundancy information row. |
| + | |
| + | FUSE_FUSECTRL_PD_CTRL controls the fuse macro's power down mode. |
| + | |
| + | FUSE_FUSECTRL_FUSE_SENSE_DONE is set if fuse sensing is completed. |
| + | |
| + | FUSE_FUSECTRL_RECORD_SHIFT_DONE is set if ramrepair shift is completed. |
| | | |
| ==== FUSE_FUSEADDR ==== | | ==== FUSE_FUSEADDR ==== |
Line 184: |
Line 195: |
| |} | | |} |
| | | |
− | Controls the [[#FUSE_FUSECTRL|STATE_READ_SETUP]] (TSUR_MAX), [[#FUSE_FUSECTRL|STATE_READ_STROBE]] (TSUR_FUSEOUT) and [[#FUSE_FUSECTRL|STATE_READ_HOLD]] (THR_MAX) times.
| + | FUSE_FUSETIME_RD1_TSUR_MAX takes the maximum time for [[#FUSE_FUSECTRL|STATE_READ_SETUP]]. |
| + | |
| + | FUSE_FUSETIME_RD1_TSUR_FUSEOUT takes the time to spend on [[#FUSE_FUSECTRL|STATE_SAMPLE_FUSES]]. |
| + | |
| + | FUSE_FUSETIME_RD1_THR_MAX takes the maximum time for [[#FUSE_FUSECTRL|STATE_READ_HOLD]]. |
| | | |
| ==== FUSE_FUSETIME_RD2 ==== | | ==== FUSE_FUSETIME_RD2 ==== |
Line 195: |
Line 210: |
| |} | | |} |
| | | |
− | Controls [[#FUSE_FUSECTRL|STATE_SAMPLE_FUSES]] (TWIDTH_RD) time.
| + | Takes the read strobe pulse width used during [[#FUSE_FUSECTRL|STATE_READ_STROBE]]. |
| | | |
| ==== FUSE_FUSETIME_PGM1 ==== | | ==== FUSE_FUSETIME_PGM1 ==== |
Line 215: |
Line 230: |
| |} | | |} |
| | | |
− | Controls the [[#FUSE_FUSECTRL|STATE_WRITE_SETUP]] (TSUP_MAX), [[#FUSE_FUSECTRL|STATE_WRITE_ADDR_SETUP]] (TSUP_ADDR), [[#FUSE_FUSECTRL|STATE_WRITE_ADDR_HOLD]] (THP_ADDR) and [[#FUSE_FUSECTRL|STATE_FUSE_SRC_HOLD]] (THP_PS) times.
| + | FUSE_FUSETIME_PGM1_TSUP_MAX takes the maximum time for [[#FUSE_FUSECTRL|STATE_WRITE_SETUP]]. |
| + | |
| + | FUSE_FUSETIME_PGM1_TSUP_ADDR takes the time to spend on [[#FUSE_FUSECTRL|STATE_WRITE_ADDR_SETUP]]. |
| + | |
| + | FUSE_FUSETIME_PGM1_THP_ADDR takes the time to spend on [[#FUSE_FUSECTRL|STATE_WRITE_ADDR_HOLD]]. |
| + | |
| + | FUSE_FUSETIME_PGM1_THP_PS takes the time to spend on [[#FUSE_FUSECTRL|STATE_FUSE_SRC_HOLD]]. |
| | | |
| ==== FUSE_FUSETIME_PGM2 ==== | | ==== FUSE_FUSETIME_PGM2 ==== |
Line 232: |
Line 253: |
| |} | | |} |
| | | |
− | Controls the [[#FUSE_FUSECTRL|STATE_WRITE_PROGRAM]] (TWIDTH_PGM), [[#FUSE_FUSECTRL|STATE_FUSE_SRC_SETUP]] (TSUP_PS) and [[#FUSE_FUSECTRL|STATE_READ_BEFORE_WRITE_SETUP]] (THP_CSPS) times.
| + | FUSE_FUSETIME_PGM2_TWIDTH_PGM takes the program strobe pulse width used during [[#FUSE_FUSECTRL|STATE_WRITE_PROGRAM]]. |
| + | |
| + | FUSE_FUSETIME_PGM2_TSUP_PS takes the time to spend on [[#FUSE_FUSECTRL|STATE_FUSE_SRC_SETUP]]. |
| + | |
| + | FUSE_FUSETIME_PGM2_THP_CSPS takes the time to spend on [[#FUSE_FUSECTRL|STATE_READ_BEFORE_WRITE_SETUP]]. |
| | | |
| ==== FUSE_PRIV2INTFC_START ==== | | ==== FUSE_PRIV2INTFC_START ==== |
Line 389: |
Line 414: |
| |} | | |} |
| | | |
− | Controls the [[#FUSE_FUSECTRL|STATE_READ_DEASSERT_PD]] (TSUR_PDCS) time.
| + | Takes the time to spend on [[#FUSE_FUSECTRL|STATE_READ_DEASSERT_PD]]. |
| | | |
| ==== FUSE_PRIVATE_KEY0_NONZERO ==== | | ==== FUSE_PRIVATE_KEY0_NONZERO ==== |
Line 790: |
Line 815: |
| | 0x7000FAF4 | | | 0x7000FAF4 |
| |- | | |- |
− | | FUSE_ECO_RESERVE_0 | + | | [[#FUSE_ECO_RESERVE_0|FUSE_ECO_RESERVE_0]] |
| | 0x7000FAF8 | | | 0x7000FAF8 |
− | |-
| |
− | | FUSE_SPARE_REALIGNMENT_REG_OLD
| |
− | | 0x7000FAFC
| |
| |- | | |- |
| | FUSE_RESERVED_CALIB0 | | | FUSE_RESERVED_CALIB0 |
Line 1,013: |
Line 1,035: |
| |} | | |} |
| | | |
− | Caches the value of the reserved_sw fuse from the hardware bitmap.
| + | Stores software reserved configuration values. |
| | | |
| Original launch units have the RCM USB controller mode set to USB 2.0, while the first batch of patched units have the RCM USB controller mode set to XUSB. | | Original launch units have the RCM USB controller mode set to USB 2.0, while the first batch of patched units have the RCM USB controller mode set to XUSB. |
Line 1,062: |
Line 1,084: |
| |- | | |- |
| | 11 | | | 11 |
− | | [5.0.0+] Patch flag (0x00 = Unpatched, 1 = Patched) | + | | [5.0.0+] Patch flag (0x00 = Unpatched, 0x01 = Patched) |
| |- | | |- |
| | 16-19 | | | 16-19 |
Line 1,688: |
Line 1,710: |
| |- | | |- |
| | ramrepair_record0 | | | ramrepair_record0 |
− | | 105 | + | | 106 |
| | None | | | None |
| | 0-31 | | | 0-31 |
| |- | | |- |
| | ramrepair_record1 | | | ramrepair_record1 |
− | | 106 | + | | 107 |
| | None | | | None |
| | 0-31 | | | 0-31 |
| |- | | |- |
| | ramrepair_record2 | | | ramrepair_record2 |
− | | 107 | + | | 108 |
| | None | | | None |
| | 0-31 | | | 0-31 |
| |- | | |- |
| | ramrepair_record3 | | | ramrepair_record3 |
− | | 108 | + | | 109 |
| | None | | | None |
| | 0-31 | | | 0-31 |
| |- | | |- |
| | ramrepair_record4 | | | ramrepair_record4 |
− | | 109 | + | | 110 |
| | None | | | None |
| | 0-31 | | | 0-31 |
| |- | | |- |
| | ramrepair_record5 | | | ramrepair_record5 |
− | | 110 | + | | 111 |
| | None | | | None |
| | 0-31 | | | 0-31 |
| |- | | |- |
| | ramrepair_record6 | | | ramrepair_record6 |
− | | 111 | + | | 112 |
| | None | | | None |
| | 0-31 | | | 0-31 |
| |- | | |- |
| | ramrepair_record7 | | | ramrepair_record7 |
− | | 112
| |
− | | None
| |
− | | 0-31
| |
− | |-
| |
− | | ramrepair_record8
| |
| | 113 | | | 113 |
| | None | | | None |
Line 1,739: |
Line 1,756: |
| | | |
| === reserved_odm6 === | | === reserved_odm6 === |
− | Used for anti-downgrade control. | + | Used for [[#Anti-downgrade|anti-downgrade]] control. |
| | | |
| === reserved_odm7 === | | === reserved_odm7 === |
− | Used for anti-downgrade control. | + | Used for [[#Anti-downgrade|anti-downgrade]] control. |
| | | |
| === irom_patch === | | === irom_patch === |
Line 2,260: |
Line 2,277: |
| | 9.0.0-9.0.1 | | | 9.0.0-9.0.1 |
| | 11 | | | 11 |
| + | | 1 |
| + | |- |
| + | | 9.1.0 |
| + | | 12 |
| | 1 | | | 1 |
| |} | | |} |