2,803
edits
Changes
Jump to navigation
Jump to search
Created page with "BCT (Boot Configuration Table) is a data structure present on Tegra based devices that supplies boot time configuration parameters. The Switch's BCT is included in the firmwa..."
BCT (Boot Configuration Table) is a data structure present on Tegra based devices that supplies boot time configuration parameters.
The Switch's BCT is included in the firmware package titles (0100000000000819 and 010000000000081A) and is installed into eMMC storage's [[#Flash_Filesystem#Boot_Partitions|boot partition 0]]. A total of four BCT copies can be installed into the system: normal, normal backup, safe mode and safe mode backup.
During boot, the boot ROM parses the appropriate BCT from eMMC storage and stores a copy of it in IRAM at address 0x40000000.
= Structure =
Below is the BCT structure used by the Switch, which is a minimal variation of the Tegra 210 BCT format.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Field
! Description
|-
| 0x0000
| 0x210
| bad_block_table
| Table containing information on bad blocks
0x0000: num_entries (0x200)
0x0004: virtual_block_size (0x0F)
0x0005: block_size (0x0E)
0x0006: bad_blocks
0x0206: reserved
|-
| 0x0210
| 0x100
| bct_key
| BCT RSA key modulus
|-
| 0x0310
| 0x30
| bct_signature
| BCT object signature
0x0310: hash (empty)
0x0320: rsa_pss_signature
|-
| 0x0420
| 0x04
| sec_provisioning_key_num_insecure
| Used for Factory Secure Provisioning. Always 0.
|-
| 0x0424
| 0x20
| sec_provisioning_key
| Used for Factory Secure Provisioning. Always empty.
|-
| 0x0444
| 0xCC
| customer_data
| Data block available for the customer. Used in key generation.
0x0444: padding_0x0C
0x0450: keyblob_0xB0
0x0500: padding_0x08
|-
| 0x0508
| 0x04
| odm_data
| Legacy field. Unused.
|-
| 0x050C
| 0x04
| reserved0
| Legacy field. Unused.
|-
| 0x0510
| 0x10
| random_aes_block
| Always empty.
|-
| 0x0520
| 0x10
| unique_chip_id
| Always empty.
|-
| 0x0530
| 0x04
| boot_data_version
| Set to 0x00210001.
|-
| 0x0534
| 0x04
| block_size_log2
| Always 0x0E.
|-
| 0x0538
| 0x04
| page_size_log2
| Always 0x09.
|-
| 0x053C
| 0x04
| partition_size
| Always 0x01000000.
|-
| 0x0540
| 0x04
| num_param_sets
| Number of device parameter sets. Always 0x01.
|-
| 0x0544
| 0x04
| dev_type
| Device type. Set to 0x04 (dev_type_sdmmc).
|-
| 0x0548
| 0x40
| dev_params
| Device parameters
0x0548: sdmmc_clock_divider (0x09 == 24MHz)
0x054C: sdmmc_data_width (0x02 == sdmmc_data_width_8bit)
|-
| 0x0588
| 0x04
| num_sdram_sets
| Number of SDRAM parameter sets. Set to 0?
|-
| 0x058C
| 0x768
| sdram_params0
|
|-
| 0x0CF4
| 0x768
| sdram_params1
|
|-
| 0x145C
| 0x768
| sdram_params2
|
|-
| 0x1BC4
| 0x768
| sdram_params3
|
|-
| 0x232C
| 0x04
| num_bootloaders
| Number of bootloaders installed. Always 0x02 (maximum is 0x04).
|-
| 0x2330
| 0x12C
| bootloader0_info
| Configuration parameters for bootloader 0 (normal).
0x2330: version (variable)
0x2334: start_block (0x00000040)
0x2338: start_page (0x00000000)
0x233C: length (variable)
0x2340: load_addr (0x40010000)
0x2344: entry_point (0x40010020)
0x2348: attribute (0x00000000)
0x234C: bootloader0_hash (empty)
0x235C: bootloader0_rsa_pss_signature
|-
| 0x245C
| 0x12C
| bootloader1_info
| Configuration parameters for bootloader 1 (safe mode).
0x245C: version (variable)
0x2460: start_block (0x00000050)
0x2464: start_page (0x00000000)
0x2468: length (variable)
0x246C: load_addr (0x40010000)
0x2470: entry_point (0x40010020)
0x2474: attribute (0x00000000)
0x2478: bootloader1_hash (empty)
0x2488: bootloader1_rsa_pss_signature
|-
| 0x2588
| 0x258
| reserved1
| Reserved space for bootloaders 2 and 3 (currently unused).
|-
| 0x27E0
| 0x04
| enable_fail_back
| Always 0.
|-
| 0x27E4
| 0x04
| secure_debug_control
| Always 0.
|-
| 0x27E8
| 0x04
| sec_provisioning_key_num_secure
| Always 0.
|-
| 0x27EC
| 0x04
| unk0
| Always 0x08?
|-
| 0x27F0
| 0x10
| reserved2
| Empty.
|-
|}
== IRAM ==
When copied to IRAM, the BCT has an additional header as follows.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Field
! Description
|-
| 0x00
| 0x50
| bct_global_header
| Contains pointers to actual BCT data.
0x4C: bct_data_addr (address of the actual BCT)
|-
| 0x50
| 0x18
| bootloader0_header
| Unknown structure.
0x00: is_active (if set to 0x01, bootloader0 is used)
|-
| 0x68
| 0x18
| bootloader1_header
| Unknown structure.
0x00: is_active (if set to 0x01, bootloader1 is used)
|-
| 0x80
| 0x18
| bootloader2_header
| Unknown structure.
0x00: is_active (if set to 0x01, bootloader2 is used)
|-
| 0x98
| 0x18
| bootloader3_header
| Unknown structure.
0x00: is_active (if set to 0x01, bootloader3 is used)
|-
|}
The Switch's BCT is included in the firmware package titles (0100000000000819 and 010000000000081A) and is installed into eMMC storage's [[#Flash_Filesystem#Boot_Partitions|boot partition 0]]. A total of four BCT copies can be installed into the system: normal, normal backup, safe mode and safe mode backup.
During boot, the boot ROM parses the appropriate BCT from eMMC storage and stores a copy of it in IRAM at address 0x40000000.
= Structure =
Below is the BCT structure used by the Switch, which is a minimal variation of the Tegra 210 BCT format.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Field
! Description
|-
| 0x0000
| 0x210
| bad_block_table
| Table containing information on bad blocks
0x0000: num_entries (0x200)
0x0004: virtual_block_size (0x0F)
0x0005: block_size (0x0E)
0x0006: bad_blocks
0x0206: reserved
|-
| 0x0210
| 0x100
| bct_key
| BCT RSA key modulus
|-
| 0x0310
| 0x30
| bct_signature
| BCT object signature
0x0310: hash (empty)
0x0320: rsa_pss_signature
|-
| 0x0420
| 0x04
| sec_provisioning_key_num_insecure
| Used for Factory Secure Provisioning. Always 0.
|-
| 0x0424
| 0x20
| sec_provisioning_key
| Used for Factory Secure Provisioning. Always empty.
|-
| 0x0444
| 0xCC
| customer_data
| Data block available for the customer. Used in key generation.
0x0444: padding_0x0C
0x0450: keyblob_0xB0
0x0500: padding_0x08
|-
| 0x0508
| 0x04
| odm_data
| Legacy field. Unused.
|-
| 0x050C
| 0x04
| reserved0
| Legacy field. Unused.
|-
| 0x0510
| 0x10
| random_aes_block
| Always empty.
|-
| 0x0520
| 0x10
| unique_chip_id
| Always empty.
|-
| 0x0530
| 0x04
| boot_data_version
| Set to 0x00210001.
|-
| 0x0534
| 0x04
| block_size_log2
| Always 0x0E.
|-
| 0x0538
| 0x04
| page_size_log2
| Always 0x09.
|-
| 0x053C
| 0x04
| partition_size
| Always 0x01000000.
|-
| 0x0540
| 0x04
| num_param_sets
| Number of device parameter sets. Always 0x01.
|-
| 0x0544
| 0x04
| dev_type
| Device type. Set to 0x04 (dev_type_sdmmc).
|-
| 0x0548
| 0x40
| dev_params
| Device parameters
0x0548: sdmmc_clock_divider (0x09 == 24MHz)
0x054C: sdmmc_data_width (0x02 == sdmmc_data_width_8bit)
|-
| 0x0588
| 0x04
| num_sdram_sets
| Number of SDRAM parameter sets. Set to 0?
|-
| 0x058C
| 0x768
| sdram_params0
|
|-
| 0x0CF4
| 0x768
| sdram_params1
|
|-
| 0x145C
| 0x768
| sdram_params2
|
|-
| 0x1BC4
| 0x768
| sdram_params3
|
|-
| 0x232C
| 0x04
| num_bootloaders
| Number of bootloaders installed. Always 0x02 (maximum is 0x04).
|-
| 0x2330
| 0x12C
| bootloader0_info
| Configuration parameters for bootloader 0 (normal).
0x2330: version (variable)
0x2334: start_block (0x00000040)
0x2338: start_page (0x00000000)
0x233C: length (variable)
0x2340: load_addr (0x40010000)
0x2344: entry_point (0x40010020)
0x2348: attribute (0x00000000)
0x234C: bootloader0_hash (empty)
0x235C: bootloader0_rsa_pss_signature
|-
| 0x245C
| 0x12C
| bootloader1_info
| Configuration parameters for bootloader 1 (safe mode).
0x245C: version (variable)
0x2460: start_block (0x00000050)
0x2464: start_page (0x00000000)
0x2468: length (variable)
0x246C: load_addr (0x40010000)
0x2470: entry_point (0x40010020)
0x2474: attribute (0x00000000)
0x2478: bootloader1_hash (empty)
0x2488: bootloader1_rsa_pss_signature
|-
| 0x2588
| 0x258
| reserved1
| Reserved space for bootloaders 2 and 3 (currently unused).
|-
| 0x27E0
| 0x04
| enable_fail_back
| Always 0.
|-
| 0x27E4
| 0x04
| secure_debug_control
| Always 0.
|-
| 0x27E8
| 0x04
| sec_provisioning_key_num_secure
| Always 0.
|-
| 0x27EC
| 0x04
| unk0
| Always 0x08?
|-
| 0x27F0
| 0x10
| reserved2
| Empty.
|-
|}
== IRAM ==
When copied to IRAM, the BCT has an additional header as follows.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Field
! Description
|-
| 0x00
| 0x50
| bct_global_header
| Contains pointers to actual BCT data.
0x4C: bct_data_addr (address of the actual BCT)
|-
| 0x50
| 0x18
| bootloader0_header
| Unknown structure.
0x00: is_active (if set to 0x01, bootloader0 is used)
|-
| 0x68
| 0x18
| bootloader1_header
| Unknown structure.
0x00: is_active (if set to 0x01, bootloader1 is used)
|-
| 0x80
| 0x18
| bootloader2_header
| Unknown structure.
0x00: is_active (if set to 0x01, bootloader2 is used)
|-
| 0x98
| 0x18
| bootloader3_header
| Unknown structure.
0x00: is_active (if set to 0x01, bootloader3 is used)
|-
|}