4,621
edits
Changes
Jump to navigation
Jump to search
Line 89:
Line 89: − + + + + +
→2.0.0
* Vmem 0x80000000 is mapped to physmem 0x80000000, using a size loaded from a register. This is only done when: "endaddr = 0x7fffffff + size; if(endaddr >= 0x80000001){...}"
* Vmem 0x80000000 is mapped to physmem 0x80000000, using a size loaded from a register. This is only done when: "endaddr = 0x7fffffff + size; if(endaddr >= 0x80000001){...}"
** The size is loaded from: "(u32 *0x70019050 & 0x3fff) << 20;"
** The size is loaded from: "(u32 *0x70019050 & 0x3fff) << 20;"
** The value written to the MMU-table descriptor is: "physaddr | val | 0x709;". val is 1<<52 when "size>>34" is non-zero and when "if((physaddr & 0x3c0000000) == 0)", otherwise val=0.
** The value written to the MMU-table descriptor is: "physaddr | val | 0x709;". val is 1<<52 when "tmp>>34" is non-zero and when "if((physaddr & 0x3c0000000) == 0)", otherwise val=0. tmp=size at the start and increased by 0xffffffffc0000000 each loop iteration. physaddr is increased by 0x40000000 each loop iteration.
TTBR1:
* vmem 0xFFFFFFF800000000 is mapped to physmem 0x80000000. Similar to above, except tmp=0 due to wrap-around, etc. The chunksize used when increasing addr is 0xfffffff840000000, with another +=0x40000000 separate from the addr cmp for the loop.
** "endaddr = 0x3fffffff + (<size from above> | 0xfffffff800000000); enaddr = (endaddr & 0xffffffffc0000000)-1; if(endaddr >= 0xfffffff800000001){<map mem>}"