Memory layout

From Nintendo Switch Brew
Jump to: navigation, search

Userspace

The userspace virtual address space can be either 32 or 36 bits. [2.0.0+] introduced support for 38 bit address spaces.

There are two regions randomized and enforced by the kernel, each one with upper bits random and 2MB-aligned:

  • ReservedHeapRegion, available from SVC#svcGetInfo.
  • ReservedMapRegion, available from SVC#svcGetInfo.
  • [2.0.0+] NewReservedMapRegion, available from SVC#svcGetInfo.
  • [2.0.0+] TlsIoRegion, not available to userspace.

The main binary is placed at an address that is provided to the kernel by Loader via SVC#svcCreateProcess.

Typically on 2.0.0+ systems, the main binary region has randomness in bits 37-21.

For the stack mapping region, the userland randomizes a page-offset where to start inside the region. This adds some additional entropy.

Binaries mapped by RO are mapped randomly everywhere in the entire address space. The base address for each NRO has all bits randomized and are 4K-aligned. This means that typically, on 2.0.0+ systems, bits 37-12 of the NRO base address are random.

For all binaries(main area / NROs), the R-- section is always located immediately after R-X. The RW- section is always located immediately after the R-- section. Hence, there's no extra randomization / guard-pages for these sections.

On version 1.0.0, the initial binaries loaded into memory by the kernel always have the upper 32-bits as all-zero, so there are 6 fewer bits of layout randomization.

Binaries loaded within the main-binary-region are loaded into memory in the following order, immediately after each other, for the binaries which exist in ExeFS:

  • rtld
  • main
  • subsdk*
  • sdk

ASLR Implementation

The kernel uses a MT19937 random number generator, seeded by a smcGetRandomBytes

1.0.0

if (AddressSpaceType == 2) {
  BaseAddr = 0x80000000; // 64-bit
  RandomMax = 0x6400;
}
else {
  BaseAddr = 0x40000000; // 32-bit
  RandomMax = 0x200;
}

if (AddressSpaceType == 4) {
  MapRegionSize = 0;
  HeapRegionSize = 0x80000000;
}
else {
  MapRegionSize = 0x40000000;
  HeapRegionSize = 0x40000000;
}

if (EnableAslr) {
  rnd0 = GetRandomRange(0, RandomMax) << 21;
  rnd1 = GetRandomRange(0, RandomMax) << 21;
}
else {
  rnd0 = rnd1 = 0;
}

this->MapBaseAddr = BaseAddr + min(rnd0, rnd1)
this->HeapRegionBaseAddr = this->MapBaseAddr + MapRegionSize + max(rnd0, rnd1) - min(rnd0, rnd1)

Kernel

For more details, see #Notes. Here comes a summary.

PXN bit is set in the MMU descriptor for userland code pages. This means that userland code pages are not executable in kernel mode (this is equivalent to SMEP on x86).

For userland pages, the kernel has same access as userland (either both are read-only or both are read-write). It does not have SMAP. The previous rule has one exception: pages that are mapped unreadable in usermode are still forced readable from kernelmode.

KASLR is being used since 5.0.0, but not before, with the following pseudocode (might contains some errors):

DRAM crt0 mapping (ttbr1): offsets DRAM with (rand64ViaSmc() % 0x3FFF0 << 21), allocates exactly (end - _start) + 1GB.
This is a "linear" mapping. Permissions are set properly.

KERN_ADDRSPACE       := [VA(_start) : min(0xFFFFFFFFFFE00000 - VA(_start), 0x40000000)]
DRAM_FROM_SECTION1   := DRAM[0x808cd000:] // 0x808cd000 corresponds to start of section1 (loaded INI1) data, reused later

/* Global Randomize range: 0xFFFFFF8000000000 to 0xFFFFFFFFFFE00000. */
/*
    Randomize picks a random integer in ranges, clears as many low bits required,
    then checks if the address is acceptable, if not it attempts to iterate through page table entries.
    
    If it doesn't find anything, it picks another integer. In case of general failure, the whole operation
    may be done from the start again (maybe ?).
*/

/* Core0 executes this big KASLR function, then powers on the other CPUs (?). */
MapPartially(RandomizeL1Boundary(DRAM, sizeof(DRAM)) -> DRAM_FROM_SECTION1: offsetof DRAM_FROM_SECTION1,

/* Randomize */
KERN_ADDRSPACE {
    Randomize(IOAndInitialStacks, 0x2000000) {
        Map(Randomize(UartA, 0x1000)) -> UartA,
        GuardPage,
        Map(Randomize(Gicd, 0x1000)) -> Gicd,
        GuardPage,
        Map(Randomize(Gicc, 0x1000)) -> Gicc,
        ForEachCore {
            GuardPage,
            Map(Randomize(EntryThreadStack, 0x1000)) -> NextFreePage(),
            GuardPage,
            Map(Randomize(IdleSchedulerThreadStack, 0x1000)) -> NextFreePage(),
            GuardPage,
            Map(Randomize(EL1AbortStack, 0x1000)) -> NextFreePage(),
        }
    },
    
    Randomize(KernelStacks, 0xE00000),
    Map(Randomize(SlabHeaps, 0x7E9000, AFTER(VA(_end)) -> PA(_end)),
    Randomize(Kip1DecompressionBuffer, 0x8000000), /* 128 MB VA range */
},

Map(RandomizePageBoundary(GuardPage + KCoreContext * 4)) -> NextFreePages(4)

1.0.0

Virtual Physical Size Attributes Permissions Description
0xFFFFFFFFBFC00000-0xFFFFFFFFBFC45FFF 0x800A0000 0x46000 0x78B R-X Kernel .text
0xFFFFFFFFBFC46000-0xFFFFFFFFBFC48FFF 0x800E6000 0x3000 0x6000000000078B R-- Kernel .rodata
0xFFFFFFFFBFC49000-0xFFFFFFFFBFC4FFFF 0x800E9000 0x7000 0x6000000000070B RW- Kernel .data+.bss
0xFFFFFFFFBFD72000-0xFFFFFFFFBFD72FFF 0x6000F000 0x1000 0x60000000000607 RW- Exception vectors
0xFFFFFFFFBFDB5000-0xFFFFFFFFBFDB5FFF 0x60007000 0x1000 0x60000000000607 RW- Flow controller
0xFFFFFFFFBFDB7000-0xFFFFFFFFBFDB7FFF 0x60004000 0x1000 0x60000000000607 RW- Primary ICTLR
0xFFFFFFFFBFDB9000-0xFFFFFFFFBFDB9FFF 0x60001000 0x1000 0x60000000000607 RW- Resource Semaphore
0xFFFFFFFFBFDBB000-0xFFFFFFFFBFDBBFFF 0x70016000 0x2000 0x60000000000607 RW- ATOMICS
0xFFFFFFFFBFDBE000-0xFFFFFFFFBFDBEFFF 0x7000E000 0x1000 0x60000000000607 RW- PMC
0xFFFFFFFFBFDC0000-0xFFFFFFFFBFDC0FFF 0x60006000 0x1000 0x60000000000607 RW- Clock and reset
0xFFFFFFFFBFDC2000-0xFFFFFFFFBFDC2FFF 0x7001D000 0x1000 0x60000000000607 RW- MC1
0xFFFFFFFFBFDC4000-0xFFFFFFFFBFDC4FFF 0x7001C000 0x1000 0x60000000000607 RW- MC0
0xFFFFFFFFBFDC6000-0xFFFFFFFFBFDC6FFF 0x70019000 0x1000 0x60000000000607 RW- MC
0xFFFFFFFFBFDC8000-0xFFFFFFFFBFDC8FFF 0x70006000 0x1000 0x60000000000607 RW- UART-A
0xFFFFFFFFBFDCA000-0xFFFFFFFFBFDCBFFF 0x80060000 0x2000 0x6000000000070B RW-
0xFFFFFFFFBFDCE000-0xFFFFFFFFBFDCFFFF 0x80068000 0x2000 0x6000000000070B RW- Kernel main stack (cpu0)
0xFFFFFFFFBFDD2000-0xFFFFFFFFBFDD2FFF 0x80070000 0x1000 0x6000000000070B RW- Kernel runner stack (cpu0)
0xFFFFFFFFBFDD4000-0xFFFFFFFFBFDD5FFF 0x80062000 0x2000 0x6000000000070B RW-
0xFFFFFFFFBFDD8000-0xFFFFFFFFBFDD9FFF 0x8006A000 0x2000 0x6000000000070B RW- Kernel main stack (cpu1)
0xFFFFFFFFBFDDC000-0xFFFFFFFFBFDDCFFF 0x80071000 0x1000 0x6000000000070B RW- Kernel runner stack (cpu1)
0xFFFFFFFFBFDDE000-0xFFFFFFFFBFDDFFFF 0x80064000 0x2000 0x6000000000070B RW-
0xFFFFFFFFBFDE2000-0xFFFFFFFFBFDE3FFF 0x8006C000 0x2000 0x6000000000070B RW- Kernel main stack (cpu2)
0xFFFFFFFFBFDE6000-0xFFFFFFFFBFDE6FFF 0x80072000 0x1000 0x6000000000070B RW- Kernel runner stack (cpu2)
0xFFFFFFFFBFDE8000-0xFFFFFFFFBFDE9FFF 0x80066000 0x2000 0x6000000000070B RW-
0xFFFFFFFFBFDEC000-0xFFFFFFFFBFDEDFFF 0x8006E000 0x2000 0x6000000000070B RW- Kernel main stack (cpu3)
0xFFFFFFFFBFDF0000-0xFFFFFFFFBFDF0FFF 0x80073000 0x1000 0x6000000000070B RW- Kernel runner stack (cpu3)
0xFFFFFFFFBFDFB000-0xFFFFFFFFBFDFBFFF 0x50041000 0x1000 0x60000000000607 RW- ARM Interrupt Distributor
0xFFFFFFFFBFDFD000-0xFFFFFFFFBFDFDFFF 0x50042000 0x1000 0x60000000000607 RW- Interrupt Controller Physical CPU interface
0xFFFFFFFFBFDF2000-0xFFFFFFFFBFDF3FFF 0x80060000+(cpuid*0x2000) 0x2000 0x6000000000070B RW-
0xFFFFFFFFBFDF6000-0xFFFFFFFFBFDF7FFF 0x80068000+(cpuid*0x2000) 0x2000 0x6000000000070B RW- Kernel main stack (per-core self-mirror)
0xFFFFFFFFBFDFF000-0xFFFFFFFFBFDFFFFF 0x80084000+(cpuid*0x1000) 0x1000 0x6000000000070B RW- Kernel runner stack (per-core self-mirror)
0xFFFFFFFE00000000-... 0x80000000 ... 0x60000000000709 RW- Raw DRAM access

2.0.0

Cores Virtual Physical Size Attributes Permissions Description
All 0xFFFFFFF7FFC00000-0xFFFFFFF7FFC62FFF 0x800A0000 0x63000 0x78B R-X Kernel .text
All 0xFFFFFFF7FFC63000-0xFFFFFFF7FFC65FFF 0x80103000 0x3000 0x6000000000078B R-- Kernel .rodata
All 0xFFFFFFF7FFC66000-0xFFFFFFF7FFC6EFFF 0x80106000 0x9000 0x6000000000070B RW- Kernel .data+.bss
All 0xFFFFFFF7FFDC0000-0xFFFFFFF7FFDC0FFF 0x60006000 0x1000 0x60000000000607 RW- Clock and Reset
All 0xFFFFFFF7FFDC2000-0xFFFFFFF7FFDC2FFF 0x7001D000 0x1000 0x60000000000607 RW- MC1
All 0xFFFFFFF7FFDC4000-0xFFFFFFF7FFDC4FFF 0x7001C000 0x1000 0x60000000000607 RW- MC0
All 0xFFFFFFF7FFDC6000-0xFFFFFFF7FFDC6FFF 0x70019000 0x1000 0x60000000000607 RW- MC
All 0xFFFFFFF7FFDC8000-0xFFFFFFF7FFDC8FFF 0x70006000 0x1000 0x60000000000607 RW- UART-A
All 0xFFFFFFF7FFDCA000-0xFFFFFFF7FFDCAFFF 0x80060000 0x2000 0x6000000000070B RW-
All 0xFFFFFFF7FFDCE000-0xFFFFFFF7FFDCEFFF 0x80068000 0x2000 0x6000000000070B RW-
All 0xFFFFFFF7FFDD2000-0xFFFFFFF7FFDD2FFF 0x80070000 0x1000 0x6000000000070B RW-
All 0xFFFFFFF7FFDD4000-0xFFFFFFF7FFDD4FFF 0x80062000 0x2000 0x6000000000070B RW-
All 0xFFFFFFF7FFDD8000-0xFFFFFFF7FFDD8FFF 0x8006A000 0x2000 0x6000000000070B RW-
All 0xFFFFFFF7FFDDC000-0xFFFFFFF7FFDDCFFF 0x80071000 0x1000 0x6000000000070B RW-
All 0xFFFFFFF7FFDDE000-0xFFFFFFF7FFDDEFFF 0x80064000 0x2000 0x6000000000070B RW-
All 0xFFFFFFF7FFDE2000-0xFFFFFFF7FFDE2FFF 0x8006C000 0x2000 0x6000000000070B RW-
All 0xFFFFFFF7FFDE6000-0xFFFFFFF7FFDE6FFF 0x80072000 0x1000 0x6000000000070B RW-
All 0xFFFFFFF7FFDE8000-0xFFFFFFF7FFDE8FFF 0x80066000 0x2000 0x6000000000070B RW-
All 0xFFFFFFF7FFDEC000-0xFFFFFFF7FFDECFFF 0x8006E000 0x2000 0x6000000000070B RW-
All 0xFFFFFFF7FFDF0000-0xFFFFFFF7FFDF0FFF 0x80073000 0x1000 0x6000000000070B RW-
All 0xFFFFFFF7FFDFB000-0xFFFFFFF7FFDFBFFF 0x50041000 0x1000 0x60000000000607 RW- ARM Interrupt Distributor
All 0xFFFFFFF7FFDFD000-0xFFFFFFF7FFDFDFFF 0x50042000 0x1000 0x60000000000607 RW- Interrupt Controller Physical CPU interface
All 0xFFFFFFF800000000-... 0x80000000 ... 0x60000000000709 RW- Raw DRAM access

3.0.0

Cores Virtual Physical Size Attributes Permissions Description
All 0xFFFFFFF7FFC00000-0xFFFFFFF7FFC4AFFF 0x800A0000 0x4B000 0x78B R-X Kernel .text
All 0xFFFFFFF7FFC4B000-0xFFFFFFF7FFC4DFFF 0x800EB000 0x3000 0x6000000000078B R-- Kernel .rodata
All 0xFFFFFFF7FFC4E000-0xFFFFFFF7FFC5AFFF 0x800EE000 0xD000 0x6000000000070B RW- Kernel .data+.bss
All 0xFFFFFFF7FFDAC000-0xFFFFFFF7FFDACFFF 0x60006000 0x1000 0x60000000000607 RW- Clock and Reset
All 0xFFFFFFF7FFDAE000-0xFFFFFFF7FFDAEFFF 0x7001D000 0x1000 0x60000000000607 RW- MC1
All 0xFFFFFFF7FFDB0000-0xFFFFFFF7FFDB0FFF 0x7001C000 0x1000 0x60000000000607 RW- MC0
All 0xFFFFFFF7FFDB2000-0xFFFFFFF7FFDB2FFF 0x70019000 0x1000 0x60000000000607 RW- MC
All 0xFFFFFFF7FFDB4000-0xFFFFFFF7FFDB4FFF 0x70006000 0x1000 0x60000000000607 RW- UART-A
All 0xFFFFFFF7FFDFB000-0xFFFFFFF7FFDFBFFF 0x50041000 0x1000 0x60000000000607 RW- ARM Interrupt Distributor
All 0xFFFFFFF7FFDFD000-0xFFFFFFF7FFDFDFFF 0x50042000 0x1000 0x60000000000607 RW- Interrupt Controller Physical CPU interface

4.0.0

Cores Virtual Physical Size Attributes Permissions Description
All 0xFFFFFFF7FFC00000-0xFFFFFFF7FFC50FFF 0x800A0000 0x51000 0x4000000000078B R-X Kernel .text
All 0xFFFFFFF7FFC51000-0xFFFFFFF7FFC53FFF 0x800F1000 0x3000 0x6000000000078B R-- Kernel .rodata
All 0xFFFFFFF7FFC54000-0xFFFFFFF7FFC61FFF 0x800F4000 0xE000 0x6000000000070B RW- Kernel .data+.bss
All 0xFFFFFFF7FFDAC000-0xFFFFFFF7FFDACFFF 0x60006000 0x1000 0x60000000000607 RW- Clock and Reset
All 0xFFFFFFF7FFDAE000-0xFFFFFFF7FFDAEFFF 0x7001D000 0x1000 0x60000000000607 RW- MC1
All 0xFFFFFFF7FFDB0000-0xFFFFFFF7FFDB0FFF 0x7001C000 0x1000 0x60000000000607 RW- MC0
All 0xFFFFFFF7FFDB2000-0xFFFFFFF7FFDB2FFF 0x70019000 0x1000 0x60000000000607 RW- MC
All 0xFFFFFFF7FFDB4000-0xFFFFFFF7FFDB4FFF 0x70006000 0x1000 0x60000000000607 RW- UART-A
All 0xFFFFFFF7FFDFB000-0xFFFFFFF7FFDFBFFF 0x50041000 0x1000 0x60000000000607 RW- ARM Interrupt Distributor
All 0xFFFFFFF7FFDFD000-0xFFFFFFF7FFDFDFFF 0x50042000 0x1000 0x60000000000607 RW- Interrupt Controller Physical CPU interface


The rest are are mapped to core-specific physaddrs, each one is 0x1000-bytes. Descriptor ORR-value = 0x6000000000070B.

Vmem Physmem
0xFFFFFFF7FFDF7000 <physaddr from vmem 0xFFFFFFF7FFDF6000> + 0x1000
0xFFFFFFF7FFDF3000 <physaddr from vmem 0xFFFFFFF7FFDF2000> + 0x1000
0xFFFFFFF7FFDF6000 0x800XX000
0xFFFFFFF7FFDF2000 0x800XX000
0xFFFFFFF7FFDFF000 0x800XX000
0xFFFFFFF7FFDF9000 0x800XX000

Secure Monitor

Unless otherwise mentionned, block descriptors (in our case, the one uses for the DRAM identity mapping) are all ORRed by 0x401 and page descriptors by 0x403.

1.0.0

Vmem Physmem Size Descriptor ORR-value Permissions Description
0x1F0000000 0x50041000 0x1000 0x40000000000324 ARM Interrupt Distributor
0x1F0002000 0x50042000 0x1000 0x40000000000324 Interrupt Controller Physical CPU Interface
0x1F0005000 0x70006000 0x1000 0x40000000000324 UART-A
0x1F0007000 0x60006000 0x1000 0x40000000000324 Clock and Reset
0x1F0009000 0x7000E000 0x1000 0x40000000000304 PMC
0x1F000B000 0x60005000 0x1000 0x40000000000304 TMR
0x1F000D000 0x6000C000 0x1000 0x40000000000304 System Registers
0x1F000F000 0x70012000 0x2000 0x40000000000304 SE
0x1F0012000 0x700F0000 0x1000 0x40000000000304 SYSCTR0
0x1F0014000 0x70019000 0x1000 0x40000000000304 MC
0x1F0016000 0x7000F000 0x1000 0x40000000000304 FUSE
0x1F0018000 0x70000000 0x4000 0x40000000000304 MISC
0x1F001D000 0x60007000 0x1000 0x40000000000304 Flow controller
0x1F001F000 0x40002000 0x1000 0x40000000000304 IRAM
0x1F0021000 0x7000D000 0x1000 0x40000000000304 I2C-5
0x1F0023000 0x6000D000 0x1000 0x40000000000304 GPIO-1
0x1F0025000 0x7000C000 0x1000 0x40000000000304 I2C
0x1F0180000 0x40020000 0x10000 0x40000000000324 IRAM
0x1F01A0000 0x7C010000 0x10000 0x40000000000384 TZRAM
0x1F01C3000 0x80010000 0x10000 0x40000000000324 EMEM
0x1F01C2000 0x8000F000 0x1000 0x40000000000324 EMEM
0x1F01E0000 0x7C013000 0xB000 0x304 TZRAM (Secure Monitor)
0x1F01F0000 0x7C01E000 0x2000 0x304 TZRAM (Secure Monitor and ARMv8 init)
0x1F01F6000 0x7C01E000 0x1000 0x40000000000304 TZRAM
0x1F01F8000 0x7C01F000 0x1000 0x40000000000304 TZRAM
0x1F01FA000 0x7C010000 0x1000 0x304 TZRAM (Secure Monitor exception vectors)
0x1F01FC000 0x7C011000 0x1000 0x40000000000304 TZRAM
0x1F01FE000 0x7C012000 0x1000 0x40000000000304 TZRAM

2.0.0

Vmem Physmem Size Descriptor ORR-value Permissions Description
0x7C010000 0x7C010000 0x10000 0x300 TZRAM
0x40020000 0x40020000 0x20000 0x300 iRAM-C
0x1F0080000 0x50041000 0x1000 0x40000000000304 ARM Interrupt Distributor
0x1F0082000 0x50042000 0x2000 0x40000000000304 Interrupt Controller Physical CPU interface
0x1F0085000 0x70006000 0x1000 0x40000000000324 UART-A
0x1F0087000 0x60006000 0x1000 0x40000000000324 Clock and Reset
0x1F0089000 0x7000E000 0x1000 0x40000000000304 PMC
0x1F008B000 0x60005000 0x1000 0x40000000000304 TMR
0x1F008D000 0x6000C000 0x1000 0x40000000000304 System Registers
0x1F008F000 0x70012000 0x2000 0x40000000000304 SE
0x1F0092000 0x700F0000 0x1000 0x40000000000304 SYSCTR0
0x1F0094000 0x70019000 0x1000 0x40000000000304 MC
0x1F0096000 0x7000F000 0x1000 0x40000000000304 FUSE (0x7000F800)
0x1F0098000 0x70000000 0x4000 0x40000000000304 MISC
0x1F009D000 0x60007000 0x1000 0x40000000000304 Flow Controller
0x1F009F000 0x40002000 0x1000 0x40000000000304 iRAM-A
0x1F00A1000 0x7000D000 0x1000 0x40000000000304 I2C5 - SPI 2B-6
0x1F00A3000 0x6000D000 0x1000 0x40000000000304 GPIO-1 - GPIO-8
0x1F00A5000 0x7000C000 0x1000 0x40000000000304 I2C-I2C4
0x1F00A7000 0x6000F000 0x1000 0x40000000000304 Exception vectors
0x1F0180000 0x40020000 0x10000 0x40000000000324 iRAM-C
0x1F0190000 0x40003000 0x1000 0x40000000000324 iRAM-A
0x1F01A0000 0x7C010000 0x10000 0x40000000000380 TZRAM
0x1F01C3000 0x80010000 0x10000 0x40000000000324 EMEM
0x1F01C2000 0x8000F000 0x1000 0x40000000000324 EMEM
0x1F01E0000 0x7C013000 0xB000 0x300 TZRAM (Secure Monitor)
0x1F01F0000 0x7C01E000 0x2000 0x300 TZRAM (Secure Monitor and ARMv8 init)
0x1F01F4000 <varies> 0x1000 0x40000000000320 DRAM (SPL .bss buffer visible to the Security Engine)
0x1F01F6000 0x7C01E000 0x1000 0x40000000000300 TZRAM
0x1F01F8000 0x7C01F000 0x1000 0x40000000000300 TZRAM
0x1F01FA000 0x7C010000 0x1000 0x300 TZRAM (Secure Monitor exception vectors)
0x1F01FC000 0x7C011000 0x1000 0x40000000000300 TZRAM
0x1F01FE000 0x7C012000 0x1000 0x40000000000300 TZRAM

5.0.0

5.0.0 modified the address map to have separate .text, .rodata, and .rwdata segments, instead of a single RWX segment.

However, the .rodata and .rwdata segments are both (mistakenly?) mapped R-W.

Because the same L3 page is shared for all mappings, this required modifying segment layout significantly to prevent clashes.

Vmem Physmem Size Descriptor ORR-value Description
0x7C010000 0x7C010000 0x10000 0x300 TZRAM Identity RWX (for init)
0x40020000 0x40020000 0x20000 0x300 IRAM Identity RWX (for init)
0x1F0080000 0x50041000 0x1000 0x40000000000304 ARM Interrupt Distributor
0x1F0082000 0x50042000 0x2000 0x40000000000304 Interrupt Controller Physical CPU
0x1F0085000 0x70006000 0x1000 0x40000000000324 UART-A
0x1F0087000 0x60006000 0x1000 0x40000000000324 Clock and Reset
0x1F0089000 0x7000E000 0x1000 0x40000000000304 PMC
0x1F008B000 0x60005000 0x1000 0x40000000000304 Timers
0x1F008D000 0x6000C000 0x1000 0x40000000000304 System Registers
0x1F008F000 0x70012000 0x2000 0x40000000000304 Security Engine
0x1F00AD000 0x70412000 0x2000 0x40000000000304 Undocumented/Not Present (Security Engine for Mariko?)
0x1F0092000 0x700F0000 0x1000 0x40000000000304 SYSCTR0
0x1F0094000 0x70019000 0x1000 0x40000000000304 Memory Controller
0x1F0096000 0x7000F000 0x1000 0x40000000000304 Fuse Registers
0x1F0098000 0x70000000 0x4000 0x40000000000304 MISC Registers
0x1F009D000 0x60007000 0x1000 0x40000000000304 Flow Controller
0x1F009F000 0x40002000 0x1000 0x40000000000304 IRAM
0x1F00A1000 0x7000D000 0x1000 0x40000000000304 I2C-5
0x1F00A3000 0x6000D000 0x1000 0x40000000000304 GPIO-1
0x1F00A5000 0x7000C000 0x1000 0x40000000000304 I2C
0x1F00A7000 0x6000F000 0x1000 0x40000000000304 BPMP Exception Vectors
0x1F00A9000 0x7001C000 0x1000 0x40000000000304 MC0
0x1F00AB000 0x7001D000 0x1000 0x40000000000304 MC1
0x1F0100000 0x7C010000 0x10000 0x40000000000380 TZRAM (R-- for context save)
0x1F0140000 0x7C012000 0x9000 0x300 TZRAM (R-X .text)
0x1F0149000 0x7C01B000 0x1000 0x40000000000300 TZRAM (RW- .rodata)
0x1F014A000 0x7C01C000 0x2000 0x40000000000300 TZRAM (RW- .rwdata)
0x1F01A0000 0x40020000 0x10000 0x40000000000324 IRAM (RW- for context save)
0x1F01B0000 0x40003000 0x1000 0x40000000000324 IRAM (BPMP firmware destination)
0x1F01C7000 0x8000F000 0x1000 0x40000000000324 DRAM (SE Context Save destination)
0x1F01E0000 0x7C010000 0x2000 0x300 TZRAM (RWX pk2ldr for init)
0x1F01F4000 X 0x1000 0x40000000000723 DRAM (SPL .bss buffer visible to the Security Engine)
0x1F01F6000 0x7C010000 0x1000 0x40000000000300 TZRAM (stacks)
0x1F01F8000 0x7C011000 0x1000 0x40000000000300 TZRAM (stacks)
0x1F01FA000 0x7C01D000 0x1000 0x40000000000300 TZRAM (stacks, warmboot crt0)
0x1F01FC000 0x7C01E000 0x1000 0x40000000000300 TZRAM (L2 Page Table)
0x1F01FE000 0x7C01F000 0x1000 0x40000000000300 TZRAM (L3 Page Table)

6.0.0

6.0.0 reduced the .rwdata segment to one page (previously 2).

Vmem Physmem Size Descriptor ORR-value Description
0x7C010000 0x7C010000 0x10000 0x300 TZRAM Identity RWX (for init)
0x40020000 0x40020000 0x20000 0x300 IRAM Identity RWX (for init)
0x1F0080000 0x50041000 0x1000 0x40000000000304 ARM Interrupt Distributor
0x1F0082000 0x50042000 0x2000 0x40000000000304 Interrupt Controller Physical CPU
0x1F0085000 0x70006000 0x1000 0x40000000000324 UART-A
0x1F0087000 0x60006000 0x1000 0x40000000000324 Clock and Reset
0x1F0089000 0x7000E000 0x1000 0x40000000000304 PMC
0x1F008B000 0x60005000 0x1000 0x40000000000304 Timers
0x1F008D000 0x6000C000 0x1000 0x40000000000304 System Registers
0x1F008F000 0x70012000 0x2000 0x40000000000304 Security Engine
0x1F00AD000 0x70412000 0x2000 0x40000000000304 Undocumented/Not Present (Security Engine for Mariko?)
0x1F0092000 0x700F0000 0x1000 0x40000000000304 SYSCTR0
0x1F0094000 0x70019000 0x1000 0x40000000000304 Memory Controller
0x1F0096000 0x7000F000 0x1000 0x40000000000304 Fuse Registers
0x1F0098000 0x70000000 0x4000 0x40000000000304 MISC Registers
0x1F009D000 0x60007000 0x1000 0x40000000000304 Flow Controller
0x1F009F000 0x40002000 0x1000 0x40000000000304 IRAM
0x1F00A1000 0x7000D000 0x1000 0x40000000000304 I2C-5
0x1F00A3000 0x6000D000 0x1000 0x40000000000304 GPIO-1
0x1F00A5000 0x7000C000 0x1000 0x40000000000304 I2C
0x1F00A7000 0x6000F000 0x1000 0x40000000000304 BPMP Exception Vectors
0x1F00A9000 0x7001C000 0x1000 0x40000000000304 MC0
0x1F00AB000 0x7001D000 0x1000 0x40000000000304 MC1
0x1F0100000 0x7C010000 0x10000 0x40000000000380 TZRAM (R-- for context save)
0x1F0140000 0x7C012000 0x9000 0x300 TZRAM (R-X .text)
0x1F0149000 0x7C01B000 0x1000 0x40000000000300 TZRAM (RW- .rodata)
0x1F014A000 0x7C01C000 0x1000 0x40000000000300 TZRAM (RW- .rwdata)
0x1F01A0000 0x40020000 0x10000 0x40000000000324 IRAM (RW- for context save)
0x1F01B0000 0x40003000 0x1000 0x40000000000324 IRAM (BPMP firmware destination)
0x1F01C7000 0x8000F000 0x1000 0x40000000000324 DRAM (SE Context Save destination)
0x1F01E0000 0x7C010000 0x2000 0x300 TZRAM (RWX pk2ldr for init)
0x1F01F4000 X 0x1000 0x40000000000723 DRAM (SPL .bss buffer visible to the Security Engine)
0x1F01F6000 0x7C010000 0x1000 0x40000000000300 TZRAM (stacks)
0x1F01F8000 0x7C011000 0x1000 0x40000000000300 TZRAM (stacks)
0x1F01FA000 0x7C01D000 0x1000 0x40000000000300 TZRAM (stacks, warmboot crt0)
0x1F01FC000 0x7C01E000 0x1000 0x40000000000300 TZRAM (L2 Page Table)
0x1F01FE000 0x7C01F000 0x1000 0x40000000000300 TZRAM (L3 Page Table)

IRAM

BIT

During boot, the BootROM saves the BCT in IRAM at address 0x40000100. The preceding 0x100 bytes (IRAM memory range from 0x40000000 to 0x40000100) contain a structure called BIT (Boot Info Table) which encapsulates the BCT in IRAM and is initialized by the BootROM as follows:

Offset Size Field Description
0x00 0x04 br_version Set to 0x00210001 (BOOTDATA_VERSION_T210).
0x04 0x04 bd_version Set to 0x00210001 (BOOTDATA_VERSION_T210).
0x08 0x04 rcm_version Set to 0x00210001 (BOOTDATA_VERSION_T210).
0x0C 0x04 boot_type
BOOT_TYPE_COLD = 1
BOOT_TYPE_RECOVERY = 2
BOOT_TYPE_UART = 3
BOOT_TYPE_EXIT_RCM = 4
0x10 0x04 unk0 Set to 0x05 on coldboot.
0x14 0x04 boot_device_type
0x18 0x04 boot_start_time Value from TIMERUS_CNTR_1US when the BootROM enters its main function.
0x1C 0x04 bootrom_lockdown_value This is the value that gets written into SB_CSR before nvboot. (0x10)
0x20 0x04 boot_read_bct_time Time spent reading the BCT.
0x24 0x04 boot_parse_bootloader_time Time spent parsing the bootloader info from the BCT.
0x28 0x04 osc_freq Value from CLK_RST_CONTROLLER_OSC_CTRL.
0x2C 0x01 is_boot_device_loaded Set to 1 after the boot device is initialized.
0x2D 0x01 is_sdram_configured Set to 1 after the SDRAM parameters are parsed.
0x2E 0x01 is_forced_rcm_pmc Set to 1 if bit 2 was set in APBDEV_PMC_SCRATCH0.
0x2F 0x01 is_enable_fail_back_pmc Set to 1 if bit 4 was set in APBDEV_PMC_SCRATCH0.
0x30 0x02 is_bootloader_version_mismatch Set to 1 if the bootloaders have different versions in the BCT.
0x32 0x02 is_bct_valid Set to 1 if the BCT was parsed successfully.
0x34 0x04 unk2
0x38 0x04 unk3
0x3C 0x04 active_bootloader_idx Value from 0 to 3 that represents which bootloader is active.
0x40 0x04 bct_start_block Block number where the BCT was found.
0x44 0x04 bct_start_page Page number where the BCT was found.
0x48 0x04 bct_size Size of the BCT in IRAM (0x2800).
0x4C 0x04 bct_ptr Pointer to the BCT in IRAM (0x40000100).
0x50 0x18*4 bootloader_headers[4]
Offset Size Field
0x00 0x04 is_active
0x04 0x04 bootloader_start_block
0x08 0x04 bootloader_start_page
0x0C 0x04 bootloader_length
0x10 0x04 bootloader_signed_start
0x14 0x04 bootloader_signature
0xB0 0x40 boot_device_info Structure to hold boot device parameters.
0xF0 0x04 bct_end_ptr Pointer to the end of the BCT in IRAM (0x40002900).
0xF4 0x0C padding Must be empty.

Notes

2.0.0

 Granule size for TTBR0*_EL1 is 4KB.
 TTBR0_EL1 vmem starts at vaddr 0x0.
 vmem end-addr for TTBR1_EL1 is 0xffffffffffffffff. vmem start-addr for TTBR1_EL1 is 0xFFFFFFF000000000.
 T0SZ = 31. Hence, bit-size of the TTBR0*_EL1 vmem region is 33. (0x0000000200000000)
 T1SZ = 28. Hence, bit-size of the TTBR1*_EL1 vmem region is 36. (0x0000001000000000)
 
 Note: ARM config for TTBR0 is presumably configured for userland later.
 
 See arm-doc for "Table D4-25 Translation table entry addresses when using the 4KB translation granule".
 
 See arm-doc for "Overview of VMSAv8-64 address translation using the 4KB translation granule".
 
 See arm-doc for "Table D4-11 TCR.TnSZ values and IA ranges, 4K granule with no concatenation of tables".
 Both TTBR*_EL1 use "Initial lookup level" 1. Therefore, the TTBR*_EL1 tables are level1.
 
 Due to T*SZ, Stage1/Stage2 translation for the initial table(level1) are the same, except Stage2 uses hard-coded T0SZ.
 Basically, the table is accessed as: ((u64*)tablebase)[<IA[y:30]>], where y = (37-T*SZ)+26. That is, starting at bit "y" ending(inclusive) at bit30. For TTBR0*_EL1, y = 32, while for TTBR1_EL1 y = 35.
 Hence, for TTBR0, index=((vaddr>>30) & 0x7), and for TTBR1, index=((vaddr>>30) & 0x3f).

"Vector Base Address Register (EL1)" = 0xfffffff7ffc50800.

The table for TTBR0 only contains the following:

  • Vmem 0x80000000 is mapped to physmem 0x80000000, using a size loaded from a register. This is only done when: "endaddr = 0x7fffffff + size; if(endaddr >= 0x80000001){...}"
    • The size is loaded from: "(u32 *0x70019050 & 0x3fff) << 20;"
    • The value written to the MMU-table descriptor is: "physaddr | val | 0x709;". val is 1<<52 when "tmp>>34" is non-zero and when "if((physaddr & 0x3c0000000) == 0)", otherwise val=0. tmp=size at the start and increased by 0xffffffffc0000000 each loop iteration. physaddr is increased by 0x40000000 each loop iteration.

TTBR1:

  • vmem 0xFFFFFFF800000000 is mapped to physmem 0x80000000. Similar to above, except tmp=0 due to wrap-around, etc. This also has usermode/kernel XN enabled in the descriptor ORR-value. The chunksize used when increasing addr is 0xfffffff840000000, with another +=0x40000000 separate from the addr cmp for the loop.
    • "endaddr = 0x3fffffff + (<size from above> | 0xfffffff800000000); enaddr = (endaddr & 0xffffffffc0000000)-1; if(endaddr >= 0xfffffff800000001){<map mem>}"
  • Initializes level2 pagetable descriptor for vmem 0xFFFFFFF7C0000000. descriptor = 0x3 | physaddr. physaddr is core-specific.
  • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FFC00000. descriptor = 0x3 | physaddr. physaddr is core-specific.
  • The content of the pagetable for the following level3 mmutables are not initialized in the main mmutable-init func. descriptor = 0x8007c003(0x3 | <physaddr tablebase>). tablebase=0x8007c000.
    • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FEE00000. physaddr = tablebase + (0x1<<12).
    • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FF000000. physaddr = tablebase + (0x2<<12).
    • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FF200000. physaddr = tablebase + (0x3<<12).
    • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FFA00000. physaddr = tablebase + (0x7<<12).
    • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FEC00000. physaddr = tablebase.
    • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FF400000. physaddr = tablebase + (0x4<<12).
    • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FF600000. physaddr = tablebase + (0x5<<12).
    • Initializes level3 pagetable descriptor for vmem 0xFFFFFFF7FF800000. physaddr = tablebase + (0x6<<12).