Changes

Jump to navigation Jump to search

Bus services (view source)

Revision as of 04:50, 9 October 2024

7,356 bytes added ,  04:50, 9 October 2024
→‎ISession
Line 6: Line 6:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
−
| 0 || [[#OpenSessionForDev]]
+
| 0 || [5.0.0+] [[#OpenSessionForDevDeprecated|OpenSessionForDevDeprecated]] ([1.0.0-4.1.0] OpenSessionForDev)
 
|-
 
|-
−
| 1 || [[#OpenSession]]
+
| 1 || [5.0.0+] [[#OpenSessionDeprecated|OpenSessionDeprecated]] ([1.0.0-4.1.0] OpenSession)
 
|-
 
|-
−
| 2 || [[#OpenSessionForTest]]
+
| 2 || [5.0.0+] [[#OpenSessionForTestDeprecated|OpenSessionForTestDeprecated]] ([1.0.0-4.1.0] OpenSessionForTest)
 
|-
 
|-
−
| 3 || [1.0.0-6.2.0] [[#IsWakeEventActive]]
+
| 3 || [5.0.0-6.2.0] [[#IsWakeEventActiveDeprecated|IsWakeEventActiveDeprecated]] ([1.0.0-4.1.0] IsWakeEventActive)
 
|-
 
|-
−
| 4 || [1.0.0-6.2.0] GetWakeEventActiveFlagSet
+
| 4 || [5.0.0-6.2.0] [[#GetWakeEventActiveFlagSetDeprecated|GetWakeEventActiveFlagSetDeprecated]] ([1.0.0-4.1.0] GetWakeEventActiveFlagSet)
 
|-
 
|-
−
| 5 || [1.0.0-6.2.0] SetWakeEventActiveFlagSetForDebug
+
| 5 || [5.0.0-6.2.0] [[#SetWakeEventActiveFlagSetForDebugDeprecated|SetWakeEventActiveFlagSetForDebugDeprecated]] ([1.0.0-4.1.0] SetWakeEventActiveFlagSetForDebug)
 
|-
 
|-
−
| 6 || [[#SetWakePinDebugMode]]
+
| 6 || [[#SetWakePinDebugMode|SetWakePinDebugMode]]
 
|-
 
|-
−
| 7 || [5.0.0+] [[#OpenSession2]]
+
| 7 || [5.0.0+] [[#OpenSession|OpenSession]]
 
|-
 
|-
−
| 8 || [5.0.0+] [[#IsWakeEventActive2]]
+
| 8 || [5.0.0+] [[#IsWakeEventActive|IsWakeEventActive]]
 
|-
 
|-
−
| 9 || [5.0.0+] SetWakeEventActiveFlagSetForDebug2
+
| 9 || [5.0.0+] [[#SetWakeEventActiveFlagSetForDebug|SetWakeEventActiveFlagSetForDebug]]
 
|-
 
|-
−
| 10 || [6.0.0+] [[#SetRetryValues]]
+
| 10 || [6.0.0+] [[#DumpStateForDebug|DumpStateForDebug]]
 
|}
 
|}
   −
== OpenSessionForDev ==
+
== OpenSessionForDevDeprecated ==
−
Takes a raw [[#GpioPadDescriptor]] and returns an [[#IPadSession]].
+
Takes an input [[#GpioPadDescriptor]]. Returns an [[#IPadSession]].
 +
 
 +
== OpenSessionDeprecated ==
 +
Same as [[#OpenSessionForDevDeprecated]] except it takes a [[#GpioPadName]] which is then converted to a [[#GpioPadDescriptor]]. Returns an [[#IPadSession]].
 +
 
 +
== OpenSessionForTestDeprecated ==
 +
Same as [[#OpenSessionDeprecated]] but panics on failure.
   −
== OpenSession ==
+
== IsWakeEventActiveDeprecated ==
−
Same as [[#OpenSessionForDev]] except it takes a [[#GpioPadName]] which is then converted to a [[#GpioPadDescriptor]]. Returns an [[#IPadSession]].
+
Takes an input [[#GpioPadName]]. Returns a bool '''IsActive'''.
   −
== OpenSessionForTest ==
+
== GetWakeEventActiveFlagSetDeprecated ==
−
Same as [[#OpenSession]] but panics on failure.
+
No input. Returns an output u128 [[#WakeBitFlag]].
   −
== IsWakeEventActive ==
+
== SetWakeEventActiveFlagSetForDebugDeprecated ==
−
Takes a [[#GpioPadName]] and returns a bool.
+
Takes an input [[#GpioPadName]] and an input bool '''IsEnabled'''. No output.
    
== SetWakePinDebugMode ==
 
== SetWakePinDebugMode ==
−
Takes an u32 '''WakePinDebugMode'''. No output.
+
Takes an input u32 '''WakePinDebugMode'''. No output.
 +
 
 +
== OpenSession ==
 +
Same as [[#OpenSessionDeprecated]] but takes a [[#GpioPadName|DeviceCode]] and an input [[#OpenMode]].
   −
== OpenSession2 ==
+
== IsWakeEventActive ==
−
Same as [[#OpenSession]] but takes a [[#GpioPadName|DeviceCode]] and an input u32 [[#AccessMode]].
+
Same as [[#IsWakeEventActiveDeprecated]] but takes a [[#GpioPadName|DeviceCode]].
   −
== IsWakeEventActive2 ==
+
== SetWakeEventActiveFlagSetForDebug ==
−
Same as [[#IsWakeEventActive]] but takes a [[#GpioPadName|DeviceCode]].
+
Same as [[#SetWakeEventActiveFlagSetForDebugDeprecated]] but takes a [[#GpioPadName|DeviceCode]].
   −
== SetRetryValues ==
+
== DumpStateForDebug ==
 
Stubbed. Returns 0.
 
Stubbed. Returns 0.
   Line 60: Line 69:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
−
| 0 || SetDirection
+
| 0 || [12.0.0+] [[#SetDirectionDeprecated|SetDirectionDeprecated]] ([1.0.0-11.0.1] SetDirection)
 +
|-
 +
| 1 || [[#GetDirection|GetDirection]]
 +
|-
 +
| 2 || [[#SetInterruptMode|SetInterruptMode]]
 
|-
 
|-
−
| 1 || GetDirection
+
| 3 || [[#GetInterruptMode|GetInterruptMode]]
 
|-
 
|-
−
| 2 || SetInterruptMode
+
| 4 || [[#SetInterruptEnable|SetInterruptEnable]]
 
|-
 
|-
−
| 3 || GetInterruptMode
+
| 5 || [[#GetInterruptEnable|GetInterruptEnable]]
 
|-
 
|-
−
| 4 || SetInterruptEnable
+
| 6 || [1.0.0-16.1.0] [[#GetInterruptStatus|GetInterruptStatus]]
 
|-
 
|-
−
| 5 || GetInterruptEnable
+
| 7 || [1.0.0-16.1.0] [[#ClearInterruptStatus|ClearInterruptStatus]]
 
|-
 
|-
−
| 6 || GetInterruptStatus
+
| 8 || [[#SetValue|SetValue]]
 
|-
 
|-
−
| 7 || ClearInterruptStatus
+
| 9 || [[#GetValue|GetValue]]
 
|-
 
|-
−
| 8 || SetValue
+
| 10 || [[#BindInterrupt|BindInterrupt]]
 
|-
 
|-
−
| 9 || GetValue
+
| 11 || [[#UnbindInterrupt|UnbindInterrupt]]
 
|-
 
|-
−
| 10 || BindInterrupt
+
| 12 || [[#SetDebounceEnabled|SetDebounceEnabled]]
 
|-
 
|-
−
| 11 || UnbindInterrupt
+
| 13 || [[#GetDebounceEnabled|GetDebounceEnabled]]
 
|-
 
|-
−
| 12 || SetDebounceEnabled
+
| 14 || [[#SetDebounceTime|SetDebounceTime]]
 
|-
 
|-
−
| 13 || GetDebounceEnabled
+
| 15 || [[#GetDebounceTime|GetDebounceTime]]
 
|-
 
|-
−
| 14 || SetDebounceTime
+
| 16 || [4.0.0+] [[#SetValueForSleepState|SetValueForSleepState]]
 
|-
 
|-
−
| 15 || GetDebounceTime
+
| 17 || [6.0.0+] [[#GetMaxDebounceTime|GetMaxDebounceTime]]
 
|-
 
|-
−
| 16 || [4.0.0+] SetValueForSleepState
+
| 18 || [12.0.0+] [[#SetDirectionInput|SetDirectionInput]]
 
|-
 
|-
−
| 17 || [6.0.0+] GetValueForSleepState
+
| 19 || [12.0.0+] [[#SetDirectionOutput|SetDirectionOutput]]
 
|}
 
|}
 +
 +
=== SetDirectionDeprecated ===
 +
Takes an input u32 [[#Direction]]. No output.
 +
 +
=== GetDirection ===
 +
No input. Returns an output u32 [[#Direction]].
 +
 +
=== SetInterruptMode ===
 +
Takes an input u32 [[#InterruptMode]]. No output.
 +
 +
=== GetInterruptMode ===
 +
No input. Returns an output u32 [[#InterruptMode]].
 +
 +
=== SetInterruptEnable ===
 +
Takes an input bool '''IsEnable'''. No output.
 +
 +
=== GetInterruptEnable ===
 +
No input. Returns an output bool '''IsEnable'''.
 +
 +
=== GetInterruptStatus ===
 +
No input. Returns an output u32 [[#InterruptStatus]].
 +
 +
=== ClearInterruptStatus ===
 +
No input/output.
 +
 +
=== SetValue ===
 +
Takes an input u32 [[#GpioValue]]. No output.
 +
 +
=== GetValue ===
 +
No input. Returns an output u32 [[#GpioValue]].
 +
 +
=== BindInterrupt ===
 +
No input. Returns an output Event handle.
 +
 +
=== UnbindInterrupt ===
 +
No input/output.
 +
 +
=== SetDebounceEnabled ===
 +
Takes an input bool '''IsEnable'''. No output.
 +
 +
=== GetDebounceEnabled ===
 +
No input. Returns an output bool '''IsEnable'''.
 +
 +
=== SetDebounceTime ===
 +
Takes an input s32 '''MsecTime'''. No output.
 +
 +
=== GetDebounceTime ===
 +
No input. Returns an output s32 '''MsecTime'''.
 +
 +
=== SetValueForSleepState ===
 +
Takes an input u32 '''ValueForSleepState'''. No output.
 +
 +
=== GetMaxDebounceTime ===
 +
No input. Returns an output u32 '''MaxDebounceTime'''.
 +
 +
=== SetDirectionInput ===
 +
No input/output.
 +
 +
=== SetDirectionOutput ===
 +
Takes an input u32 [[#GpioValue]]. No output.
    
= i2c, i2c:pcv =
 
= i2c, i2c:pcv =
Line 116: Line 189:     
== OpenSessionForDev ==
 
== OpenSessionForDev ==
−
Takes an input u32 '''BusIdx''', an input u16 '''SlaveAddress''', and 2 input u32s [[#AddressingMode]] and [[#SpeedMode]]. Returns an [[#II2cSession]].
+
Takes an input u16 '''SlaveAddress''' (padded to u32) and 3 input u32s '''BusIdx''', [[#AddressingMode]] and [[#SpeedMode]]. Returns an [[#II2cSession]].
    
== OpenSession ==
 
== OpenSession ==
−
Takes an input u32 [[#I2cDevice]]. Returns an output [[#II2cSession]].
+
Takes an input [[#I2cDevice]]. Returns an output [[#II2cSession]].
    
== HasDevice ==
 
== HasDevice ==
−
Takes an input u32 [[#I2cDevice]]. Returns an output boolean success value.
+
Takes an input [[#I2cDevice]]. Returns an output boolean success value.
    
== HasDeviceForDev ==
 
== HasDeviceForDev ==
−
Takes an input u32 '''BusIdx''', an input u16 '''SlaveAddress''', and 2 input u32s [[#AddressingMode]] and [[#SpeedMode]]. Returns an output boolean success value.
+
Takes an input u16 '''SlaveAddress''' (padded to u32) and 3 input u32s '''BusIdx''', [[#AddressingMode]] and [[#SpeedMode]]. Returns an output boolean success value.
    
== OpenSession2 ==
 
== OpenSession2 ==
−
Same as [[#OpenSession_2|OpenSession]] but takes an input u32 [[#I2cDevice|DeviceCode]].
+
Same as [[#OpenSession_2|OpenSession]], but takes an input u32 [[#I2cDevice|DeviceCode]].
    
== II2cSession ==
 
== II2cSession ==
Line 143: Line 216:  
| 2 || [1.0.0-5.1.0] ExecuteCommandListOld
 
| 2 || [1.0.0-5.1.0] ExecuteCommandListOld
 
|-
 
|-
−
| 10 || [[#Send]]
+
| 10 || [[#Send|Send]]
 
|-
 
|-
−
| 11 || [[#Receive]]
+
| 11 || [[#Receive|Receive]]
 
|-
 
|-
−
| 12 || [[#ExecuteCommandList]]
+
| 12 || [[#ExecuteCommandList|ExecuteCommandList]]
 
|-
 
|-
−
| 13 || [6.0.0+] [[#SetRetryPolicy]]
+
| 13 || [6.0.0+] [[#SetRetryPolicy_2|SetRetryPolicy]]
 
|}
 
|}
   Line 188: Line 261:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
−
| 0 || [[#HasPort]]
+
| 0 || [1.0.0-16.1.0] [[#HasPort|HasPort]]
 
|-
 
|-
−
| 1 || [[#HasPortForDev]]
+
| 1 || [1.0.0-16.1.0] [[#HasPortForDev|HasPortForDev]]
 
|-
 
|-
−
| 2 || [[#IsSupportedBaudRate]]
+
| 2 || [1.0.0-16.1.0] [[#IsSupportedBaudRate|IsSupportedBaudRate]]
 
|-
 
|-
−
| 3 || [[#IsSupportedBaudRateForDev]]
+
| 3 || [1.0.0-16.1.0] [[#IsSupportedBaudRateForDev|IsSupportedBaudRateForDev]]
 
|-
 
|-
−
| 4 || [[#IsSupportedFlowControlMode]]
+
| 4 || [1.0.0-16.1.0] [[#IsSupportedFlowControlMode|IsSupportedFlowControlMode]]
 
|-
 
|-
−
| 5 || [[#IsSupportedFlowControlModeForDev]]
+
| 5 || [1.0.0-16.1.0] [[#IsSupportedFlowControlModeForDev|IsSupportedFlowControlModeForDev]]
 
|-
 
|-
−
| 6 || [[#CreatePortSession]]
+
| 6 || [[#CreatePortSession|CreatePortSession]]
 
|-
 
|-
−
| 7 || [[#IsSupportedPortEvent]]
+
| 7 || [1.0.0-16.1.0] [[#IsSupportedPortEvent|IsSupportedPortEvent]]
 
|-
 
|-
−
| 8 || [[#IsSupportedPortEventForDev]]
+
| 8 || [1.0.0-16.1.0] [[#IsSupportedPortEventForDev|IsSupportedPortEventForDev]]
 
|-
 
|-
−
| 9 || [7.0.0+] [[#IsSupportedDeviceVariation]]
+
| 9 || [7.0.0-16.1.0] [[#IsSupportedDeviceVariation|IsSupportedDeviceVariation]]
 
|-
 
|-
−
| 10 || [7.0.0+] [[#IsSupportedDeviceVariationForDev]]
+
| 10 || [7.0.0-16.1.0] [[#IsSupportedDeviceVariationForDev|IsSupportedDeviceVariationForDev]]
 
|}
 
|}
   Line 223: Line 296:     
== IsSupportedBaudRateForDev ==
 
== IsSupportedBaudRateForDev ==
−
Takes 2 input u32s [[#UartPortForDev]] '''BaudRate'''. Returns an output boolean success value.
+
Takes 2 input u32s [[#UartPortForDev]] and '''BaudRate'''. Returns an output boolean success value.
    
Supported baud rates are 57600, 115200, 1000000 and 3000000.
 
Supported baud rates are 57600, 115200, 1000000 and 3000000.
Line 259: Line 332:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
−
| 0 || [[#OpenPort]]
+
| 0 || [[#OpenPort|OpenPort]]
 +
|-
 +
| 1 || [[#OpenPortForDev|OpenPortForDev]]
 
|-
 
|-
−
| 1 || [[#OpenPortForDev]]
+
| 2 || [[#GetWritableLength|GetWritableLength]]
 
|-
 
|-
−
| 2 || [[#GetWritableLength]]
+
| 3 || [[#Send_2|Send]]
 
|-
 
|-
−
| 3 || [[#Send]]
+
| 4 || [[#GetReadableLength|GetReadableLength]]
 
|-
 
|-
−
| 4 || [[#GetReadableLength]]
+
| 5 || [[#Receive_2|Receive]]
 
|-
 
|-
−
| 5 || [[#Receive]]
+
| 6 || [[#BindPortEvent|BindPortEvent]]
 
|-
 
|-
−
| 6 || [[#BindPortEvent]]
+
| 7 || [[#UnbindPortEvent|UnbindPortEvent]]
 
|-
 
|-
−
| 7 || [[#UnbindPortEvent]]
+
| 8 || [14.0.0+] [[#OpenPort2|OpenPort2]]
 
|}
 
|}
   Line 305: Line 380:  
=== UnbindPortEvent ===
 
=== UnbindPortEvent ===
 
Takes an input u32 [[#PortEventType]]. Returns an output boolean success value.
 
Takes an input u32 [[#PortEventType]]. Returns an output boolean success value.
 +
 +
=== OpenPort2 ===
 +
Same as [[#OpenPort]], but takes an input u32 [[#UartPort|DeviceCode]] instead of an [[#UartPort]] and no longer returns an output boolean success value.
    
= pwm =
 
= pwm =
Line 334: Line 412:  
| 1 || GetPeriod
 
| 1 || GetPeriod
 
|-
 
|-
−
| 2 || SetDuty
+
| 2 || [1.0.0-13.2.1] SetDuty
 
|-
 
|-
−
| 3 || GetDuty
+
| 3 || [1.0.0-13.2.1] GetDuty
 
|-
 
|-
 
| 4 || SetEnabled
 
| 4 || SetEnabled
Line 342: Line 420:  
| 5 || GetEnabled
 
| 5 || GetEnabled
 
|-
 
|-
−
| 6 || [6.0.0+] SetScale
+
| 6 || [6.0.0+] [[#SetDutyCycle|SetDutyCycle]]
 
|-
 
|-
−
| 7 || [6.0.0+] GetScale
+
| 7 || [6.0.0+] [[#GetDutyCycle|GetDutyCycle]]
 
|}
 
|}
 +
 +
=== SetDutyCycle ===
 +
Takes an input double '''DutyCycle'''. No output.
 +
 +
=== GetDutyCycle ===
 +
No input. Returns an output double '''DutyCycle'''.
    
= pinmux =
 
= pinmux =
Line 367: Line 451:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
−
| 0 || [[#SetPinAssignment]]
+
| 0 || [[#SetPinAssignment|SetPinAssignment]]
 +
|-
 +
| 1 || [[#GetPinAssignment|GetPinAssignment]]
 +
|-
 +
| 2 || [[#SetPinAssignmentForHardwareTest|SetPinAssignmentForHardwareTest]]
 +
|-
 +
| 3 || [17.0.0+] SetSfioConfiguration
 +
|-
 +
| 4 || [17.0.0+] GetSfioConfiguration
 +
|-
 +
| 5 || [17.0.0+] SetInputEnableConfiguration
 +
|-
 +
| 6 || [17.0.0+] GetInputEnableConfiguration
 +
|-
 +
| 7 || [17.0.0+] SetPullConfiguration
 +
|-
 +
| 8 || [17.0.0+] GetPullConfiguration
 
|-
 
|-
−
| 1 || [[#GetPinAssignment]]
+
| 9 || [17.0.0+] SetPmConfiguration
 
|-
 
|-
−
| 2 || [[#SetPinAssignmentForHardwareTest]]
+
| 10 || [17.0.0+] GetPmConfiguration
 
|}
 
|}
   Line 405: Line 505:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
−
| 0 || [[#Write]]
+
| 0 || [[#Send_3|Send]]
 
|-
 
|-
−
| 1 || [[#Read]]
+
| 1 || [[#Receive_3|Receive]]
 
|-
 
|-
−
| 2 || [[#StartPeriodicReceiveMode]]
+
| 2 || [[#StartPeriodicReceiveMode|StartPeriodicReceiveMode]]
 
|-
 
|-
−
| 3 || [[#StopPeriodicReceiveMode]]
+
| 3 || [[#StopPeriodicReceiveMode|StopPeriodicReceiveMode]]
 +
|-
 +
| 4 || [19.0.0+]
 +
|-
 +
| 5 || [19.0.0+]
 
|}
 
|}
   −
=== Write ===
+
=== Send ===
 
Takes a type-0x21 input buffer and an u8 '''SpiCommand'''. No output.
 
Takes a type-0x21 input buffer and an u8 '''SpiCommand'''. No output.
   −
=== Read ===
+
=== Receive ===
 
Takes a type-0x22 output buffer and an u8 '''SpiCommand'''. No output.
 
Takes a type-0x22 output buffer and an u8 '''SpiCommand'''. No output.
   Line 425: Line 529:  
=== StopPeriodicReceiveMode ===
 
=== StopPeriodicReceiveMode ===
 
No input/output.
 
No input/output.
 +
 +
=== Cmd4 ===
 +
Takes a total of 0x10-bytes of input and an input handle. No output.
 +
 +
This is similar to [[#StartPeriodicReceiveMode|StartPeriodicReceiveMode]]. This eventually calls an impl func which just writes some input fields into state, then (on NX) Aborts.
 +
 +
=== Cmd5 ===
 +
No input/output.
 +
 +
This is identical to [[#StopPeriodicReceiveMode|StopPeriodicReceiveMode]].
    
= led =
 
= led =
Line 435: Line 549:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
−
| 0 || [[#OpenController]]
+
| 0 || [[#OpenController|OpenController]]
 
|}
 
|}
   Line 450: Line 564:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
−
| 0 ||  
+
| 0 || StartLighting
 
|-
 
|-
−
| 1 ||  
+
| 1 || StopLighting
 
|-
 
|-
−
| 2 ||  
+
| 2 || SetLightingMode
 
|-
 
|-
−
| 3 ||  
+
| 3 || GetLightingMode
 
|-
 
|-
−
| 4 ||
+
| 4 || IsLighting
 
|-
 
|-
−
| 5 ||
+
| 5 || SetRisingTime
 
|-
 
|-
−
| 6 ||
+
| 6 || GetRisingTime
 
|-
 
|-
−
| 7 ||
+
| 7 || SetFallingTime
 
|-
 
|-
−
| 8 ||
+
| 8 || GetFallingTime
 
|-
 
|-
−
| 9 ||
+
| 9 || SetPeakTime
 
|-
 
|-
−
| 10 ||
+
| 10 || GetPeakTime
 
|-
 
|-
−
| 11 ||
+
| 11 || SetPulseInterval
 
|-
 
|-
−
| 12 ||
+
| 12 || GetPulseInterval
 
|-
 
|-
−
| 13 ||
+
| 13 || SetPulseCount
 
|-
 
|-
−
| 14 ||
+
| 14 || GetPulseCount
 
|-
 
|-
−
| 15 ||
+
| 15 || GetMaxPulseCount
 
|-
 
|-
−
| 16 ||
+
| 16 || SetBreathInterval
 
|-
 
|-
−
| 17 ||
+
| 17 || GetBreathInterval
 
|-
 
|-
−
| 18 ||
+
| 18 || SetConstantBrightness
 
|-
 
|-
−
| 19 ||
+
| 19 || GetConstantBrightness
 
|-
 
|-
−
| 20 ||
+
| 20 || [10.0.0+] GetBreathingStatus ([8.1.1-9.2.0] RegisterPwmChannel)
 
|-
 
|-
−
| 21 || [8.1.1-9.2.0]
+
| 21 || [8.1.1-9.2.0] UnregisterPwmChannel
 
|}
 
|}
   Line 526: Line 640:  
| 0x0C || ExtconDetS || 0x26 || 0x3500040B || E, 6 || Joy-Con(L) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert)  || In || [[HID services]], [[AM services]] || Icosa, Iowa, Aula
 
| 0x0C || ExtconDetS || 0x26 || 0x3500040B || E, 6 || Joy-Con(L) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert)  || In || [[HID services]], [[AM services]] || Icosa, Iowa, Aula
 
|-
 
|-
−
| 0x0D || Vdd50AEn || 0x05 || 0x39000401 || A, 5 || Fan and Joy-Con Rails Power (Battery - BQ24193 5V) || Out || [[PTM services]] || Icosa, Hoag, Iowa, Aula
+
| 0x0D || Vdd50AEn || 0x05 || 0x39000401 || A, 5 || Fan and Joy-Con 5V Power (Battery) || Out || [[PTM services]] || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
−
| 0x0E || SdevCoaxSel1 || 0x78 || 0xCA000402 || P, 0 || SDEV Coax Select || In || || Icosa, Iowa
+
| 0x0E || SdevCoaxSel1 || 0x78 || 0xCA000406 ([1.0.0-10.0.0] 0xCA000402) || P, 0 || SDEV Coax Select || In || || Icosa, Iowa
 
|-
 
|-
 
| 0x0F || GameCardCd || 0x93 || 0x3C000403 || S, 3 || Gamecard Card Detect || In || [[Filesystem services]], [[AM services]] || Icosa, Copper, Hoag, Iowa, Aula
 
| 0x0F || GameCardCd || 0x93 || 0x3C000403 || S, 3 || Gamecard Card Detect || In || [[Filesystem services]], [[AM services]] || Icosa, Copper, Hoag, Iowa, Aula
Line 544: Line 658:  
| 0x15 || CodecHpDetIrq || 0xAE || 0x33000004 || V, 6 || Audio Codec (ALC5639) Headphone Detect || In || [[Audio services]] || Icosa, Hoag, Iowa, Aula
 
| 0x15 || CodecHpDetIrq || 0xAE || 0x33000004 || V, 6 || Audio Codec (ALC5639) Headphone Detect || In || [[Audio services]] || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
−
| 0x16 || MotionInt || 0xBA || 0x35000041 || X, 2 || || In || || Icosa, Hoag, Iowa, Aula
+
| 0x16 || MotionInt || 0xBA || 0x35000041 || X, 2 || Built-in IMU IRQ || In || || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
 
| 0x17 || TpIrq || 0xB9 || 0x35000036 || X, 1 || TouchPanel IRQ || In || [[HID services]] || Icosa, Hoag, Iowa, Aula
 
| 0x17 || TpIrq || 0xB9 || 0x35000036 || X, 1 || TouchPanel IRQ || In || [[HID services]] || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
−
| 0x18 || ButtonSleep2 || 0xBD || 0x35000001 || X, 5 || Power Button || In || || Icosa, Copper, Hoag, Iowa, Calcio, Aula
+
| 0x18 || ButtonSleep2 || 0xBD || 0x35000001 || X, 5 || Power Button (Connected only on Hoag) || In || || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
 
| 0x19 || ButtonVolUp || 0xBE || 0x35000002 || X, 6 || Volume Up || In || [[Boot2]], [[Audio services]], [[Fatal services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
| 0x19 || ButtonVolUp || 0xBE || 0x35000002 || X, 6 || Volume Up || In || [[Boot2]], [[Audio services]], [[Fatal services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
Line 556: Line 670:  
| 0x1B || BattMgicIrq || 0xC0 || 0x39000034 || Y, 0 || Fuel Gauge IC (MAX17050) IRQ || In || [[PTM services]], [[AM services]] || Icosa, Hoag, Iowa, Aula
 
| 0x1B || BattMgicIrq || 0xC0 || 0x39000034 || Y, 0 || Fuel Gauge IC (MAX17050) IRQ || In || [[PTM services]], [[AM services]] || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
−
| 0x1C || RecoveryKey || 0xC1 || 0x35000004 || Y, 1 || Recovery Mode Key || In || || Icosa, Copper, Hoag, Iowa, Calcio, Aula
+
| 0x1C || RecoveryKey || 0xC1 || 0x35000004 || Y, 1 || Recovery Mode Key (HOME Button) || In || || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
−
| 0x1D || PowLcdBlEn || 0xA9 || 0x3400003E || V, 1 || Backlight Enable || Out || [[NV services]], [[Backlight services]] || Icosa, Hoag, Iowa
+
| 0x1D || PowLcdBlEn || 0xA9 || 0x3400003E || V, 1 || LCD Backlight Power || Out || [[NV services]], [[Backlight services]] || Icosa, Hoag, Iowa
 
|-
 
|-
−
| 0x1E || LcdReset || 0xAA || 0x34000033 || V, 2 || Backlight Reset || Out || [[NV services]] || Icosa, Hoag, Iowa, Aula
+
| 0x1E || LcdReset || 0xAA || 0x34000033 || V, 2 || LCD Reset || Out || [[NV services]] || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
 
| 0x1F || PdVconnEn || 0x55 || 0x040000CC || K, 5 || USB-PD Controller (RHOM BM92T30MWV) VCONN Power || Out || [[PTM services]], [[USB services]] || Icosa, Hoag, Iowa, Aula
 
| 0x1F || PdVconnEn || 0x55 || 0x040000CC || K, 5 || USB-PD Controller (RHOM BM92T30MWV) VCONN Power || Out || [[PTM services]], [[USB services]] || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
−
| 0x20 || PdRstN || 0xAD || 0x040000CA || V, 5 || USB-PD Controller (RHOM BM92T30MWV) Reset || Out || [[USB services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
+
| 0x20 || PdRstN || 0xAD || 0x040000CA || V, 5 || USB-PD Controller (RHOM BM92T30MWV) ResetN || Out || [[USB services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
 
| 0x21 || Bq24190Irq || 0xC8 || 0x39000002 || Z, 0 || Charger IC (BQ24193) IRQ || In || [[PTM services]], [[AM services]] || Icosa, Hoag, Iowa, Aula
 
| 0x21 || Bq24190Irq || 0xC8 || 0x39000002 || Z, 0 || Charger IC (BQ24193) IRQ || In || [[PTM services]], [[AM services]] || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
−
| 0x22 || SdevCoaxSel0 || 0xCA || 0xCA000401 || Z, 2 || SDEV Coax Select || In || || Icosa, Iowa
+
| 0x22 || SdevCoaxSel0 || 0xCA || 0xCA000405 ([1.0.0-10.0.0] 0xCA000401) || Z, 2 || SDEV Coax Select || In || || Icosa, Iowa
 
|-
 
|-
 
| 0x23 || SdWp || 0xCB || 0x3C000003 || Z, 3 || SdCard Write Protect || In || || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
| 0x23 || SdWp || 0xCB || 0x3C000003 || Z, 3 || SdCard Write Protect || In || || Icosa, Copper, Hoag, Iowa, Calcio, Aula
Line 582: Line 696:  
| 0x28 || CradleIrq || 0x54 || 0x040000CB || K, 4 || USB-PD Controller (RHOM BM92T30MWV) IRQ || In || [[USB services]], [[AM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
| 0x28 || CradleIrq || 0x54 || 0x040000CB || K, 4 || USB-PD Controller (RHOM BM92T30MWV) IRQ || In || [[USB services]], [[AM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
−
| 0x29 || PowVcpuInt || 0x56 || 0x3E000003 || K, 6 || || In || ||  Icosa, Copper, Aula
+
| 0x29 || PowVcpuInt || 0x56 || 0x3E000003 || K, 6 || Sub-PMIC for CPU (MAX77621) IRQ || In || ||  Icosa, Copper, Aula
 
|-
 
|-
−
| 0x2A || Max77621GpuInt || 0x57 || 0x3E000004 || K, 7 || || In || || Icosa, Copper
+
| 0x2A || Max77621GpuInt || 0x57 || 0x3E000004 || K, 7 || Sub-PMIC for GPU (MAX77621) IRQ || In || || Icosa, Copper
 
|-
 
|-
 
| 0x2B || ExtconChgU || 0x53 || 0x35000402 || K, 3 || Joy-Con(R) Charge || Out || [[HID services]] || Icosa, Iowa, Aula
 
| 0x2B || ExtconChgU || 0x53 || 0x35000402 || K, 3 || Joy-Con(R) Charge || Out || [[HID services]] || Icosa, Iowa, Aula
Line 594: Line 708:  
| 0x2E || WifiReset || 0x39 || 0x38000002 || H, 1 || WiFi Reset || Out || [[WLAN services]], [[PCIe services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
| 0x2E || WifiReset || 0x39 || 0x38000002 || H, 1 || WiFi Reset || Out || [[WLAN services]], [[PCIe services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
−
| 0x2F || ApWakeBt || 0x3B || 0x37000003 || H, 3 || || Out || [[Bluetooth Driver services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
+
| 0x2F || ApWakeBt || 0x3B || 0x37000003 || H, 3 || Wake Bluetooth from Host || Out || [[Bluetooth Driver services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
−
| 0x30 || BtWakeAp || 0x3D || 0x37000004 || H, 5 || || In || [[AM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
+
| 0x30 || BtWakeAp || 0x3D || 0x37000004 || H, 5 || Wake Host from Bluetooth || In || [[AM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
 
| 0x31 || BtGpio5 || 0x3F || 0x37000404 || H, 7 || || Out || || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
| 0x31 || BtGpio5 || 0x3F || 0x37000404 || H, 7 || || Out || || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
−
| 0x32 || PowLcdVddPEn || 0x40 || 0x34000034 || I, 0 || Backlight +5V || Out || [[NV services]] || Icosa, Hoag, Iowa
+
| 0x32 || PowLcdVddPEn || 0x40 || 0x34000034 || I, 0 || LCD Backlight PAVDD +5V || Out || [[NV services]] || Icosa, Hoag, Iowa
 
|-
 
|-
−
| 0x33 || PowLcdVddNEn || 0x41 || 0x34000035 || I, 1 || Backlight -5V || Out || [[NV services]] || Icosa, Hoag, Iowa
+
| 0x33 || PowLcdVddNEn || 0x41 || 0x34000035 || I, 1 || LCD Backlight NAVDD -5V || Out || [[NV services]] || Icosa, Hoag, Iowa
 
|-
 
|-
 
| 0x34 || ExtconDetU || 0x3E || 0x35000401 || H, 6 || Joy-Con(R) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert)  || In || [[HID services]], [[AM services]] || Icosa, Iowa, Aula
 
| 0x34 || ExtconDetU || 0x3E || 0x35000401 || H, 6 || Joy-Con(R) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert)  || In || [[HID services]], [[AM services]] || Icosa, Iowa, Aula
Line 608: Line 722:  
| 0x35 || RamCode2 || 0xE2 || 0xC9000401 || CC, 2 || Secondary Boot Device Configration || In || || Icosa, Iowa
 
| 0x35 || RamCode2 || 0xE2 || 0xC9000401 || CC, 2 || Secondary Boot Device Configration || In || || Icosa, Iowa
 
|-
 
|-
−
| 0x36 || Vdd50BEn || 0xE4 || 0x39000402 || CC, 4 || Fan and Joy-Con Rails Power (USB 5V) || Out || [[PTM services]] || Icosa, Iowa
+
| 0x36 || Vdd50BEn || 0xE4 || 0x39000402 || CC, 4 || Fan and Joy-Con 5V Power (USB) || Out || [[PTM services]] || Icosa, Iowa
 
|-
 
|-
−
| 0x37 || WifiWakeHost || 0x3A || 0x38000004 || H, 2 || || In || [[AM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
+
| 0x37 || WifiWakeHost || 0x3A || 0x38000004 || H, 2 || Wake Host from Wifi || In || [[AM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
|-
 
|-
 
| 0x38 || SdCd || 0xC9 || 0x3C000002 || Z, 1 || SdCard Card Detect || In || [[Filesystem services]], [[AM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
 
| 0x38 || SdCd || 0xC9 || 0x3C000002 || Z, 1 || SdCard Card Detect || In || [[Filesystem services]], [[AM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Aula
Line 622: Line 736:  
| 0x3C || ExtConWakeS || 0x26 || 0x3500040D || E, 6 || Joy-Con(L) Wake Detect || In || || Icosa, Hoag, Iowa, Aula
 
| 0x3C || ExtConWakeS || 0x26 || 0x3500040D || E, 6 || Joy-Con(L) Wake Detect || In || || Icosa, Hoag, Iowa, Aula
 
|-
 
|-
−
| 0x3D || PmuIrq || -1 || 0x39000406 || || || || ||  
+
| 0x3D || PmuIrq || -1 || 0x39000406 || GIC 86 || Main PMIC IRQ (PMU_EXT IRQ) || || ||  
 
|-
 
|-
 
| 0x3E || ExtUart2Cts || 0x33 || 0x35000404 || G, 3 || Joy-Con(R) CTS (checked low) || In || [[HID services]], [[AM services]] ||  
 
| 0x3E || ExtUart2Cts || 0x33 || 0x35000404 || G, 3 || Joy-Con(R) CTS (checked low) || In || [[HID services]], [[AM services]] ||  
Line 644: Line 758:  
| 0x47 || UsbSwitchB2En || 0x98 || 0x04000406 || T, 0 || USB Root Port 2 Power || Out || [[USB services]] || Copper
 
| 0x47 || UsbSwitchB2En || 0x98 || 0x04000406 || T, 0 || USB Root Port 2 Power || Out || [[USB services]] || Copper
 
|-
 
|-
−
| 0x48 || Hdmi5VEn || 0x10 || 0x34000004 || C, 0 || HDMI 5V || Out || [[NV services]] || Copper, Calcio
+
| 0x48 || Hdmi5VEn || 0x10 || 0x34000004 || C, 0 || HDMI 5V Power || Out || [[NV services]] || Copper, Calcio
 
|-
 
|-
 
| 0x49 || UsbSwitchB1En || 0x11 || 0x04000407 || C, 1 || USB Root Port 1 Power || Out || [[USB services]] || Copper, Calcio
 
| 0x49 || UsbSwitchB1En || 0x11 || 0x04000407 || C, 1 || USB Root Port 1 Power || Out || [[USB services]] || Copper, Calcio
Line 650: Line 764:  
| 0x4A || HdmiPdTrEn || 0x12 || 0x34000005 || C, 2 || HDMI/Power Delivery Switch || Out || [[NV services]] || Copper, Calcio
 
| 0x4A || HdmiPdTrEn || 0x12 || 0x34000005 || C, 2 || HDMI/Power Delivery Switch || Out || [[NV services]] || Copper, Calcio
 
|-
 
|-
−
| 0x4B || FanEn || 0x42 || 0x3D000003 || I, 2 || Fan Enable || Out || [[PTM services]] || Copper
+
| 0x4B || FanEn || 0x42 || 0x3D000003 || I, 2 || Fan Power || Out || [[PTM services]] || Copper
 
|-
 
|-
 
| 0x4C || UsbSwitchB1Oc || 0xE6 || 0x04000408 || CC, 6 || USB Root Port 1 Over Current || In || [[USB services]] || Copper, Calcio
 
| 0x4C || UsbSwitchB1Oc || 0xE6 || 0x04000408 || CC, 6 || USB Root Port 1 Over Current || In || [[USB services]] || Copper, Calcio
Line 658: Line 772:  
| [2.0.0+] 0x4E || HdmiHpd || 0xE1 || 0x34000006 || CC, 1 || HDMI Hot Plug Detect || In || [[NV services]] || Copper, Calcio
 
| [2.0.0+] 0x4E || HdmiHpd || 0xE1 || 0x34000006 || CC, 1 || HDMI Hot Plug Detect || In || [[NV services]] || Copper, Calcio
 
|-
 
|-
−
| [5.0.0+] 0x4F || Max77812Irq || 0x56 || 0x3E000003 || K, 6 || || In || || Hoag, Iowa, Calcio
+
| [5.0.0+] 0x4F || Max77812Irq || 0x56 || 0x3E000003 || K, 6 || Sub-PMIC (CPU/GPU/RAM) IRQ || In || || Hoag, Iowa, Calcio
 
|-
 
|-
 
| [6.0.0+] 0x50 || Debug0 || 0x20 || 0xCA000001 || E, 0 || || Out || || Hoag, Calcio, Aula
 
| [6.0.0+] 0x50 || Debug0 || 0x20 || 0xCA000001 || E, 0 || || Out || || Hoag, Calcio, Aula
Line 668: Line 782:  
| [6.0.0+] 0x53 || Debug3 || 0x23 || 0xCA000004 || E, 3 || || Out || || Hoag, Calcio, Aula
 
| [6.0.0+] 0x53 || Debug3 || 0x23 || 0xCA000004 || E, 3 || || Out || || Hoag, Calcio, Aula
 
|-
 
|-
−
| [6.0.0+] 0x54 || NfcIrq || 0x4C || 0x36000004 || J, 4 || || In || [[NFC services]] || Hoag
+
| [6.0.0+] 0x54 || NfcIrq || 0x4C || 0x36000004 || J, 4 || NFC Controller IRQ || In || [[NFC services]] || Hoag
 
|-
 
|-
−
| [6.0.0+] 0x55 || NfcRst || 0x57 || 0x36000003 || K, 7 || || Out || [[NFC services]] || Hoag
+
| [6.0.0+] 0x55 || NfcRst || 0x57 || 0x36000003 || K, 7 || NFC Controller Reset || Out || [[NFC services]] || Hoag
 
|-
 
|-
−
| [6.0.0+] 0x56 || McuIrq || 0x27 ([6.0.0-8.0.0] 0x94) || 0x35000415 || S, 4 || || In || || Hoag
+
| [6.0.0+] 0x56 || McuIrq || 0x27 ([6.0.0-8.0.0] 0x94) || 0x35000415 || E, 7 || Sio MCU IRQ || In || || Hoag
 
|-
 
|-
−
| [6.0.0+] 0x57 || McuBoot || 0x98 || 0x35000416 || T, 0 || || Out || [[HID services]] || Hoag
+
| [6.0.0+] 0x57 || McuBoot || 0x98 || 0x35000416 || T, 0 || Sio MCU BOOT0 Select (0: Flash, 1: SRAM) || Out || [[HID services]] || Hoag
 
|-
 
|-
−
| [6.0.0+] 0x58 || McuRst || 0x99 || 0x35000417 || T, 1 || || Out || [[HID services]] || Hoag
+
| [6.0.0+] 0x58 || McuRst || 0x99 || 0x35000417 || T, 1 || Sio MCU ResetN (Output LOW -> Input) || In || [[HID services]] || Hoag
 
|-
 
|-
−
| [6.0.0+] 0x59 || Vdd5V3En || 0xBB || 0x39000403 || X, 3 || 5V3 Fan Power || Out || [[PTM services]] || Hoag, Iowa, Aula
+
| [6.0.0+] 0x59 || Vdd5V3En || 0xBB || 0x39000403 || X, 3 || OTG VBUS Power || Out || [[PTM services]] || Hoag, Iowa, Aula
 
|-
 
|-
−
| [6.0.0+] 0x5A || McuPor || 0xE5 || 0x35000418 || CC, 5 || || Out || [[HID services]] || Hoag
+
| [6.0.0+] 0x5A || McuPor || 0xE5 || 0x35000418 || CC, 5 || Sio MCU NPOR || Out || [[HID services]] || Hoag
 
|-
 
|-
−
| [6.0.0+] 0x5B || || 0xAB || 0x35000005 || V, 3 || SioMcu Input || In || [[HID services]], [[AM services]] || Hoag
+
| [6.0.0+] 0x5B || (McuHome) || 0xAB || 0x35000005 || V, 3 || Sio MCU Home Button || In || [[HID services]], [[AM services]] || Hoag
 
|-
 
|-
−
| [6.0.0+] 0x5C || NfcEn || 0x4E || 0x36000002 || J, 6 || || Out || [[NFC services]] || Hoag
+
| [6.0.0+] 0x5C || NfcEn || 0x4E || 0x36000002 || J, 6 || NFC Controller Power || Out || [[NFC services]] || Hoag
 
|-
 
|-
 
| [7.0.0+] - || ExtUart2Rts || 0x32 || 0x35000406 || G, 2 || Joy-Con(R) RTS || In || ||  
 
| [7.0.0+] - || ExtUart2Rts || 0x32 || 0x35000406 || G, 2 || Joy-Con(R) RTS || In || ||  
Line 690: Line 804:  
| [7.0.0+] - || ExtUart3Rts || 0x1B || 0x35000410 || D, 3 || Joy-Con(L) RTS || In || ||  
 
| [7.0.0+] - || ExtUart3Rts || 0x1B || 0x35000410 || D, 3 || Joy-Con(L) RTS || In || ||  
 
|-
 
|-
−
| [7.0.0+] - || || 0x17 || 0x3500041B || C, 7 || || In || || Hoag
+
| [7.0.0+] - || || 0x17 || 0x3500041B || C, 7 || SPI4 MOSI (Built-in IMU, set as gpio-input so Sio can use IMU) || In || || Hoag
 
|-
 
|-
−
| [7.0.0+] - || || 0x18 || 0x3500041C || D, 0 || || In || || Hoag
+
| [7.0.0+] - || || 0x18 || 0x3500041C || D, 0 || SPI4 MISO (Built-in IMU, set as gpio-input so Sio can use IMU) || In || || Hoag
 
|-
 
|-
−
| [7.0.0+] - || || 0x15 || 0x3500041D || C, 5 || || In || || Hoag
+
| [7.0.0+] - || || 0x15 || 0x3500041D || C, 5 || SPI4 SCLK (Built-in IMU, set as gpio-input so Sio can use IMU) || In || || Hoag
 
|-
 
|-
−
| [7.0.0+] - || || 0x16 || 0x3500041E || C, 6 || || In || || Hoag
+
| [7.0.0+] - || || 0x16 || 0x3500041E || C, 6 || SPI4 CS0 (Built-in IMU, set as gpio-input so Sio can use IMU) || In || || Hoag
 
|-
 
|-
−
| [10.0.0+] - || || 0xC5 || 0x35000065 || Y, 5 || || Out || || Hoag
+
| [10.0.0+] - || || 0xC5 || 0x35000065 || Y, 5 || Notification LED PWM (CLK 32K OUT) || Out || || Hoag
 
|-
 
|-
 
| [10.0.0+] - || || 0x29 || 0x04000409 || F, 1 || || Out || || Calcio
 
| [10.0.0+] - || || 0x29 || 0x04000409 || F, 1 || || Out || || Calcio
 
|-
 
|-
−
| [10.0.0+] - || || 0x38 || 0x34000401 || H, 0 || Dp2hdmi || In || [[Display services]] || Aula
+
| [10.0.0+] - || || 0x38 || 0x34000401 || H, 0 || OLED Panel IRQ || In || [[Display services]] || Aula
 +
|-
 +
| [13.0.0+] - || (BtGpio6) || 0x46 || 0x37000405 || I, 6 || UART-D RTS (Bluetooth) || In || ||
 
|}
 
|}
   Line 715: Line 831:  
|-
 
|-
 
| 2-0 || Pin number
 
| 2-0 || Pin number
 +
|}
 +
 +
= Direction =
 +
This is "nn::gpio::Direction".
 +
 +
{| class="wikitable sortable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Input
 +
|-
 +
| 1 || Output
 +
|}
 +
 +
= GpioValue =
 +
This is "nn::gpio::GpioValue".
 +
 +
{| class="wikitable sortable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Low
 +
|-
 +
| 1 || High
 +
|}
 +
 +
= InterruptMode =
 +
This is "nn::gpio::InterruptMode".
 +
 +
{| class="wikitable sortable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || LowLevel
 +
|-
 +
| 1 || HighLevel
 +
|-
 +
| 2 || RisingEdge
 +
|-
 +
| 3 || FallingEdge
 +
|-
 +
| 4 || AnyEdge
 +
|}
 +
 +
= InterruptStatus =
 +
This is "nn::gpio::InterruptStatus".
 +
 +
{| class="wikitable sortable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Inactive
 +
|-
 +
| 1 || Active
 +
|}
 +
 +
= WakeBitFlag =
 +
This is "nn::gpio::WakeBitFlag". This is a 128-bit flag.
 +
 +
= OpenMode =
 +
This is "nn::gpio::OpenMode".
 +
 +
{| class="wikitable sortable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || None
 +
|-
 +
| 1 || Read
 +
|-
 +
| 2 || Write
 +
|-
 +
| 3 || ReadWrite
 
|}
 
|}
   Line 778: Line 967:  
| [2.0.0+] 26 || HdmiHdcp || 0x34000003 || 3:3A || N || 100000 || 0 ||      0 || HDMI HDCP || [[NV services]] || Copper, Calcio
 
| [2.0.0+] 26 || HdmiHdcp || 0x34000003 || 3:3A || N || 100000 || 0 ||      0 || HDMI HDCP || [[NV services]] || Copper, Calcio
 
|-
 
|-
−
| [4.0.0+] 27 || Fan53528 || 0x3A000005 || 4:52 ([4.0.0-8.0.0] 4:A4) || N || 400000 || 0 ||      0 || Buck Regulator || || Hoag, Iowa, Calcio, Aula
+
| [4.0.0+] 27 || Fan53528 || 0x3A000005 || 4:52 ([4.0.0-8.0.0] 4:A4) || N || 400000 || 0 ||      0 || RAM Regulator (tied to Max77812Pmic) || || Hoag, Iowa, Calcio, Aula
 
|-
 
|-
−
| [4.0.0+] 28 || Max77812Pmic || 0x3A000002 || 4:31 ([8.0.0-9.2.0] 4:33, [4.0.0-8.0.0] 4:31) || N || 400000 || 0 ||      0 || PMIC || [[PCV services]] || Hoag, Iowa, Calcio, Aula
+
| [4.0.0+] 28 || Max77812Pmic || 0x3A000002 || 4:31 ([8.0.0-9.2.0] 4:33, [4.0.0-8.0.0] 4:31) || N || 400000 || 0 ||      0 || Sub-PMIC for CPU and GPU (tied to Fan53528) (Phase 31) || [[PCV services]] || Hoag, Iowa, Calcio, Aula
 
|-
 
|-
−
| [4.0.0+] 29 || Max77812Pmic || 0x3A000006 ([4.0.0-9.2.0] 0x3A000002) || 4:33 ([4.0.0-8.0.0] 4:31) || N || 400000 || 0 ||      0 || PMIC || [[PCV services]] || Hoag, Iowa, Calcio, Aula
+
| [4.0.0+] 29 || Max77812Pmic || 0x3A000006 ([4.0.0-9.2.0] 0x3A000002) || 4:33 ([4.0.0-8.0.0] 4:31) || N || 400000 || 0 ||      0 || Sub-PMIC for GPU, CPU and RAM (Phase 211) || [[PCV services]] || Hoag, Iowa, Calcio, Aula
 
|-
 
|-
 
| [4.0.0+] 30 || Ina226VddDdr0V6 (SdevMariko) || 0x3F000409 || 1:4E || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory
 
| [4.0.0+] 30 || Ina226VddDdr0V6 (SdevMariko) || 0x3F000409 || 1:4E || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory
 
|-
 
|-
−
| [8.0.0+] 31 || || 0x36000001 || 1:08 || N || 400000 || 3 || 5000000 || MillauNfc || [[NFC services]] || Hoag
+
| [8.0.0+] 31 || (MillauNfc) || 0x36000001 || 1:08 || N || 400000 || 3 || 5000000 || NFC Controller || [[NFC services]] || Hoag
 +
|-
 +
| [12.0.0+] - || (Max77801) || 0x3A000007 || 4:18 || N || 400000 || 0 ||      0 || Audio Codec (ALC5639) Regulator || [[PCV services]] || Aula
 
|}
 
|}
   Line 938: Line 1,129:  
! Value || Description
 
! Value || Description
 
|-
 
|-
−
| 0 || GPIO(G, 0) and GPIO(G, 3)
+
| 0 || ExtConUartB
 
|-
 
|-
−
| 1 || GPIO(D, 1) and GPIO(D, 4)
+
| 1 || ExtConUartC
 
|-
 
|-
−
| 2 || Sdmmc1Clk or GPIO(M, 0), GPIO(M, 1), GPIO(M, 2), GPIO(M, 3), GPIO(M, 4) and GPIO(M, 5)
+
| 2 || Sdmmc1
 
|-
 
|-
−
| 3 || GPIO(V, 4)
+
| 3 || PwmFan
 
|-
 
|-
 
| 100 || Invalid
 
| 100 || Invalid
Line 964: Line 1,155:  
| 3 || Invalid
 
| 3 || Invalid
 
|-
 
|-
−
| 100 || Uart4Tx, Uart4Rx, Uart4Rts and Uart4Cts
+
| 100 || UartD
 
|}
 
|}
   Line 973: Line 1,164:  
|-
 
|-
 
! Value || Name
 
! Value || Name
 +
|-
 +
| 0 || ExtConUartOutputEnable
 +
|-
 +
| 1 || ExtConUartOutputHiZ
 
|-
 
|-
 
| 2 || Sdmmc1OutputHigh
 
| 2 || Sdmmc1OutputHigh
Line 981: Line 1,176:  
|-
 
|-
 
| 5 || Sdmmc1SchmtDisable
 
| 5 || Sdmmc1SchmtDisable
 +
|-
 +
| 6 || PwmFanEnable
 +
|-
 +
| 7 || PwmFanHiZ
 
|}
 
|}
   Line 1,000: Line 1,199:  
! Value || Name || DeviceCode || Description
 
! Value || Name || DeviceCode || Description
 
|-
 
|-
−
| 0 || SPI4 || 0x3500003D || Joy-Con
+
| 0 || SPI4 || 0x3500003D || Lsm6ds3 (WHOAMI 0x69, 0x6A and 0x6C)
−
|}
  −
 
  −
= AccessMode =
  −
This is "nn::ddsf::AccessMode".
  −
 
  −
{| class="wikitable sortable" border="1"
   
|-
 
|-
−
! Value || Name
+
| [10.0.0+] 1 || SPI4 || 0x3500003D || Icm40607 (WHOAMI 0x38)
 
|-
 
|-
−
| 0 || None
+
| [13.0.0+] 2 || SPI4 || 0x3500003D || Icm42607p (WHOAMI 0x60)
−
|-
  −
| 1 || Read
  −
|-
  −
| 2 || Write
  −
|-
  −
| 3 || ReadWrite
   
|}
 
|}
    
[[Category:Services]]
 
[[Category:Services]]
Retrieved from "https://switchbrew.org/wiki/Special:MobileDiff/10586...13005"

Navigation menu