Bus services

From Nintendo Switch Brew
Revision as of 17:50, 13 March 2020 by Hexkyz (talk | contribs)
Jump to navigation Jump to search

gpio

This is "nn::gpio::IManager".

Cmd Name
0 #OpenSessionForDev
1 #OpenSession
2 #OpenSessionForTest
3 [1.0.0-6.2.0] #IsWakeEventActive
4 [1.0.0-6.2.0] GetWakeEventActiveFlagSet
5 [1.0.0-6.2.0] SetWakeEventActiveFlagSetForDebug
6 #SetWakePinDebugMode
7 [5.0.0+] #OpenSession2
8 [5.0.0+] #IsWakeEventActive2
9 [5.0.0+] SetWakeEventActiveFlagSetForDebug2
10 [6.0.0+] #SetRetryValues

OpenSessionForDev

Takes a raw #GpioPadDescriptor and returns an #IPadSession.

OpenSession

Same as #OpenSessionForDev except it takes a #GpioPadName which is then converted to a #GpioPadDescriptor. Returns an #IPadSession.

OpenSessionForTest

Same as #OpenSession but panics on failure.

IsWakeEventActive

Takes a #GpioPadName and returns a bool.

SetWakePinDebugMode

Takes an u32 WakePinDebugMode. No output.

OpenSession2

Same as #OpenSession but takes a DeviceCode and an u32.

IsWakeEventActive2

Same as #IsWakeEventActive but takes a DeviceCode.

SetRetryValues

Stubbed. Returns 0.

IPadSession

This is "nn::gpio::IPadSession".

Cmd Name
0 SetDirection
1 GetDirection
2 SetInterruptMode
3 GetInterruptMode
4 SetInterruptEnable
5 GetInterruptEnable
6 GetInterruptStatus
7 ClearInterruptStatus
8 SetValue
9 GetValue
10 BindInterrupt
11 UnbindInterrupt
12 SetDebounceEnabled
13 GetDebounceEnabled
14 SetDebounceTime
15 GetDebounceTime
16 [4.0.0+] SetValueForSleepState
17 [6.0.0+] GetValueForSleepState

i2c, i2c:pcv

This is "nn::i2c::IManager".

Cmd Name
0 OpenSessionForDev
1 OpenSession
[1.0.0-5.1.0] 2 HasDevice
[1.0.0-5.1.0] 3 HasDeviceForDev
4 [6.0.0+] OpenSession2

OpenSessionForDev

Takes an u32 port, an u16 addr, an AddressingMode (1 for 10-bit, 0 otherwise) and a SpeedMode (400000 or 100000). Returns an #II2cSession.

OpenSession

Takes an #I2cDevice and returns an #II2cSession.

HasDevice

Takes an #I2cDevice and returns true if the device exists or false otherwise.

HasDeviceForDev

Takes an u32 port, an u16 addr, an AddressingMode (1 for 10-bit, 0 otherwise) and a SpeedMode (400000 or 100000). Returns true if the device exists or false otherwise.

OpenSession2

Same as OpenSession but takes a DeviceCode.

II2cSession

This is "nn::i2c::ISession".

Cmd Name
[1.0.0-5.1.0] 0 Send
[1.0.0-5.1.0] 1 Receive
[1.0.0-5.1.0] 2 ExecuteCommandList
10 #SendAuto
11 ReceiveAuto
12 #ExecuteCommandListAuto
13 [6.0.0+] #SetRetryValues

SendAuto

Takes bytes to write in either a static buffer or a receive buffer, returns an error code for success.

ExecuteCommandListAuto

Takes a command list from either a static buffer or a receive buffer, returns data in either a static (or recieve?) buffer.

Commands

  • 0x40 [u8 len] <bytes> - Write bytes to device
  • 0xC1 [u8 len] - Receive bytes from device

SetRetryValues

Takes 2 u32s MaxRetries and RetryDelay. Returns 0.

uart

This is "nn::uart::IManager".

Cmd Name
0 #HasPort
1 #HasPortForDev
2 #IsSupportedBaudRate
3 #IsSupportedBaudRateForDev
4 #IsSupportedFlowControlMode
5 #IsSupportedFlowControlModeForDev
6 #CreatePortSession
7 #IsSupportedPortEvent
8 #IsSupportedPortEventForDev
9 [7.0.0+] #IsSupportedDevice
10 [7.0.0+] #IsSupportedDeviceForDev

HasPort

Takes an #UartPort. Returns a boolean success value.

HasPortForDev

Takes an #UartPortForDev. Returns a boolean success value.

IsSupportedBaudRate

Takes an #UartPort and an u32 BaudRate. Returns a boolean success value.

Supported baud rates are 57600, 115200, 1000000 and 3000000.

IsSupportedBaudRateForDev

Takes an #UartPortForDev and an u32 BaudRate. Returns a boolean success value.

Supported baud rates are 57600, 115200, 1000000 and 3000000.

IsSupportedFlowControlMode

Takes an #UartPort and an u32 FlowControlMode. Returns a boolean success value.

Supported modes are 0 (RTS) and 1 (CTS).

IsSupportedFlowControlModeForDev

Takes an #UartPortForDev and an u32 FlowControlMode. Returns a boolean success value.

Supported modes are 0 (RTS) and 1 (CTS).

CreatePortSession

No input. Returns an #IPortSession.

IsSupportedPortEvent

Takes an #UartPort and an u32 PortEvent. Returns a boolean success value.

Supported events are 0 (data), 1 (break), 2 (unknown) and 3 (unknown).

IsSupportedPortEventForDev

Takes an #UartPortForDev and an u32 PortEvent. Returns a boolean success value.

Supported events are 0 (data), 1 (break), 2 (unknown) and 3 (unknown).

IsSupportedDevice

Takes an #UartPort and an u32 Device. Returns a boolean success value.

Supported devices are 0 (Bluetooth) for UART-D, 0 (Joy-Con(R)) for UART-B, 0 (Joy-Con(L)) and 1 (MCU) for UART-C.

IsSupportedDeviceForDev

Takes an #UartPortForDev and an u32 Device. Returns a boolean success value.

Supported devices are 0 (Bluetooth) for UART-D, 0 (Joy-Con(R)) for UART-B, 0 (Joy-Con(L)) and 1 (MCU) for UART-C.

IPortSession

This is "nn::uart::IPortSession".

Cmd Name
0 #OpenPort
1 #OpenPortForDev
2 GetWritableLength
3 Send
4 GetReadableLength
5 Receive
6 BindPortEvent
7 UnbindPortEvent

OpenPort

Takes an #UartPort, 3 u32s, 2 copy handles and 4 u8s (each padded to u32). Returns a boolean success value.

[7.0.0+] Now takes an additional u64.

OpenPortForDev

Takes an #UartPortForDev, 3 u32s, 2 copy handles and 4 u8s (each padded to u32). Returns a boolean success value.

[7.0.0+] Now takes an additional u64.

pwm

This is "nn::pwm::IManager".

Cmd Name
0 OpenSessionForDev
1 OpenSession
2 [6.0.0+] OpenSession2

OpenSession2

Takes a DeviceCode and returns an #IChannelSession.

IChannelSession

This is "nn::pwm::IChannelSession".

Cmd Name
0 SetPeriod
1 GetPeriod
2 SetDuty
3 GetDuty
4 SetEnabled
5 GetEnabled
6 [6.0.0+] SetScale
7 [6.0.0+] GetScale

pinmux

This is "nn::pinmux::IManager".

Cmd Name
0 OpenSession

OpenSession

Takes an #AssignablePinGroupName or an #AssignablePinGroupNameForHardwareTest and returns an ISession.

ISession

This is "nn::pinmux::ISession".

Cmd Name
0 #SetPinAssignment
1 #GetPinAssignment
2 #SetPinAssignmentForHardwareTest

SetPinAssignment

Takes an u32 PinAssignment. No output.

GetPinAssignment

No input. Returns an u32 PinAssignment.

SetPinAssignmentForHardwareTest

Takes an u32 PinAssignmentForHardwareTest. No output.

sasbus

This is "nn::sasbus::IManager".

This was added with [3.0.0+].

Cmd Name
0 OpenSession

OpenSession

Takes a #SasbusPort and returns an ISession.

ISession

This is "nn::sasbus::ISession".

Cmd Name
0 #Write
1 #Read
2 #StartPeriodicReceiveMode
3 #StopPeriodicReceiveMode

Write

Takes a type-0x21 input buffer and an u8 SpiCommand. No output.

Read

Takes a type-0x22 output buffer and an u8 SpiCommand. No output.

StartPeriodicReceiveMode

Takes an u8 SpiCommand (padded to u32), an u32, two u64s and a copy handle. No output.

StopPeriodicReceiveMode

No input/output.

led

This is "nn::led::detail::IManager".

This was added with [8.1.1+].

Cmd Name
0 #OpenController

OpenController

Takes a DeviceCode (which must be 0x35000065) and returns an #IController session for it.

IController

This is "nn::led::detail::IController".

This was added with [8.1.1+].

Cmd Name
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

GpioPadName

This is "nn::gpio::GpioPadName".

Name GpioPadDescriptor DeviceCode Tegra (port, pin) Usage Direction Used by (services) Used by (hardware)
0x01 0xCC 0x33000002 Z, 4 Audio Codec (ALC5639) Power (CODEC_LDO_EN_TEMP) Out Audio services, Fatal services Icosa, Hoag, Iowa
0x02 0x24 0x3C000001 E, 4 SDCard Power (POW_SD_EN) Out PCV services Icosa, Copper, Hoag, Iowa, Calcio
0x03 0x3C 0x37000002 H, 4 Bluetooth Reset (BT_RST_PH4) Out Bluetooth Driver services Icosa, Copper, Hoag, Iowa, Calcio
0x04 0xDA 0xC9000402 BB, 2 Secondary Boot Device Configration (RAM_CODE3) In Icosa, Iowa
0x05 0xDB 0x3C000402 BB, 3 Gamecard Reset (GC_RST) Out Filesystem services Icosa, Copper, Hoag, Iowa
0x06 0xDC 0x33000003 BB, 4 Audio Codec (ALC5639) Alert (CODEC_ALERT) In Audio services Icosa, Hoag, Iowa
0x07 0x25 0x3C000401 E, 5 Gamecard Power (POW_GC) Out Icosa, Copper
0x08 0x90 0x350000CA S, 0 Debug Pad Detect (DEBUG_CONTROLLER_DET) In HID services Icosa, Iowa
0x09 0x91 0x39000407 S, 1 Battery Charge Status (BATT_CHG_STATUS) In Icosa, Hoag, Iowa
0x0A 0x96 0x39000003 S, 6 Charger IC (BQ24193) Charge Enable (BATT_CHG_ENABLE_N) Out PTM services Icosa, Hoag, Iowa
0x0B 0x97 0x3D000002 S, 7 Fan Tachometer (FAN_TACH) In Icosa, Hoag, Iowa, Calcio
0x0C 0x26 0x3500040B E, 6 Joy-Con(L) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert) (EXTCON_DET_S) In HID services, AM services Icosa, Iowa
0x0D 0x05 0x39000401 A, 5 Fan and Joy-Con Rails Power (Battery - BQ24193 5V) (VDD50A_EN) Out PTM services Icosa, Hoag, Iowa
0x0E 0x78 0xCA000402 P, 0 SDEV Coax Select (SDEV_COAX_SEL_1) In Icosa, Iowa
0x0F 0x93 0x3C000403 S, 3 Gamecard Card Detect (GC_CD) In Filesystem services, AM services Icosa, Copper, Hoag, Iowa
0x10 0x7D 0xC900040B P, 5 PROD_TYPE_0 In Icosa, Copper, Iowa
0x11 0x7C 0xC900040C P, 4 PROD_TYPE_1 In Icosa, Copper, Iowa
0x12 0x7B 0xC900040D P, 3 PROD_TYPE_2 In Icosa, Copper, Iowa
0x13 0x7A 0xC900040E P, 2 PROD_TYPE_3 In Icosa, Copper, Iowa
0x14 0xBC 0x3E000002 X, 4 Temperature Sensor (TEMP_ALERT) In Icosa, Copper, Hoag, Iowa, Calcio
0x15 0xAE 0x33000004 V, 6 Audio Codec (ALC5639) Headphone Detect (CODEC_HP_DET_IRQ) In Audio services Icosa, Hoag, Iowa
0x16 0xBA 0x35000041 X, 2 MOTION_INT_PX2 In Icosa, Hoag, Iowa
0x17 0xB9 0x35000036 X, 1 TouchPanel IRQ (TP_IRQ) In HID services Icosa, Hoag, Iowa
0x18 0xBD 0x35000001 X, 5 Power Button (BUTTON_POWER_ON_PX5) In Icosa, Copper, Hoag, Iowa, Calcio
0x19 0xBE 0x35000002 X, 6 Volume Up (BUTTON_VOL_UP_PX6) In Boot2, Audio services, Fatal services Icosa, Copper, Hoag, Iowa, Calcio
0x1A 0xBF 0x35000003 X, 7 Volume Down (BUTTON_VOL_DOWN_PX7) In Boot2, Audio services Icosa, Copper, Hoag, Iowa, Calcio
0x1B 0xC0 0x39000034 Y, 0 Fuel Gauge IC (MAX17050) IRQ (BATT_MGIC_IRQ) In PTM services, AM services Icosa, Hoag, Iowa
0x1C 0xC1 0x35000004 Y, 1 Recovery Mode Key (BUTTON_HOME_PY1) In Icosa, Copper, Hoag, Iowa, Calcio
0x1D 0xA9 0x3400003E V, 1 Backlight Enable (LCD_BL_EN_PV1) Out NV services, Backlight services Icosa, Hoag, Iowa
0x1E 0xAA 0x34000033 V, 2 Backlight Reset (LCD_RST_PV2) Out NV services Icosa, Hoag, Iowa
0x1F 0x55 0x040000CC K, 5 USB-PD Controller (RHOM BM92T30MWV) VCONN Power (PD_VCONN_EN) Out PTM services, USB services Icosa, Hoag, Iowa
0x20 0xAD 0x040000CA V, 5 USB-PD Controller (RHOM BM92T30MWV) Reset (PD_RST) Out USB services Icosa, Copper, Hoag, Iowa, Calcio
0x21 0xC8 0x39000002 Z, 0 Charger IC (BQ24193) IRQ (BQ24193_IRQ) In PTM services, AM services Icosa, Hoag, Iowa
0x22 0xCA 0xCA000401 Z, 2 SDEV Coax Select (SDEV_COAX_SEL_0) In Icosa, Iowa
0x23 0xCB 0x3C000003 Z, 3 SDCard Write Protect (SD_WP) In Icosa, Copper, Hoag, Iowa, Calcio
0x24 0x4F 0x35000035 J, 7 TouchPanel Reset (TP_RST) Out HID services Icosa, Hoag, Iowa
0x25 0x50 0x37000401 K, 0 BT_GPIO_2 In Icosa, Copper, Hoag, Iowa, Calcio
0x26 0x51 0x37000402 K, 1 BT_GPIO_3 In Icosa, Copper, Hoag, Iowa, Calcio
0x27 0x52 0x37000403 K, 2 BT_GPIO_4 In Icosa, Copper, Hoag, Iowa, Calcio
0x28 0x54 0x040000CB K, 4 USB-PD Controller (RHOM BM92T30MWV) IRQ (PD_IRQ) In USB services, AM services Icosa, Copper, Hoag, Iowa, Calcio
0x29 0x56 0x3E000003 K, 6 POW_VCPU_INT In Icosa, Copper
0x2A 0x57 0x3E000004 K, 7 MAX77621_GPU_INT In Icosa, Copper
0x2B 0x53 0x35000402 K, 3 Joy-Con(R) Charge (EXTCON_CHG_U) Out HID services Icosa, Iowa
0x2C 0xE3 0x3500040C CC, 3 Joy-Con(L) Charge (EXTCON_CHG_S) Out HID services Icosa, Iowa
0x2D 0x38 0x38000003 H, 0 WIFI_RF_DISABLE Out Icosa, Copper, Hoag, Iowa, Calcio
0x2E 0x39 0x38000002 H, 1 WiFi Reset (WIFI_RST_PH1) Out WLAN services, PCIe services Icosa, Copper, Hoag, Iowa, Calcio
0x2F 0x3B 0x37000003 H, 3 AP_WAKE_BT_PH3 Out Bluetooth Driver services Icosa, Copper, Hoag, Iowa, Calcio
0x30 0x3D 0x37000004 H, 5 BT_WAKE_AP In AM services Icosa, Copper, Hoag, Iowa, Calcio
0x31 0x3F 0x37000404 H, 7 BT_GPIO_5 Out Icosa, Copper, Hoag, Iowa, Calcio
0x32 0x40 0x34000034 I, 0 Backlight +5V (LCD_VDD_P_EN) Out NV services Icosa, Hoag, Iowa
0x33 0x41 0x34000035 I, 1 Backlight -5V (LCD_VDD_N_EN) Out NV services Icosa, Hoag, Iowa
0x34 0x3E 0x35000401 H, 6 Joy-Con(R) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert) (EXTCON_DET_U) In HID services, AM services Icosa, Iowa
0x35 0xE2 0xC9000401 CC, 2 Secondary Boot Device Configration (RAM_CODE2) In Icosa, Iowa
0x36 0xE4 0x39000402 CC, 4 Fan and Joy-Con Rails Power (USB 5V) (VDD50B_EN) Out PTM services Icosa, Iowa
0x37 0x3A 0x38000004 H, 2 WIFI_WAKE_HOST In AM services Icosa, Copper, Hoag, Iowa, Calcio
0x38 0xC9 0x3C000002 Z, 1 SDCard Card Detect (SD_CD) In Filesystem services, AM services Icosa, Copper, Hoag, Iowa, Calcio
0x39 0x4D 0x39000404 J, 5 Charger IC (BQ24193) OTG Charge Select (OTG_FET_1) Out PTM services, USB services Icosa, Iowa
0x3A 0x58 0x39000405 L, 0 Charger IC (BQ24193) OTG Charge Select (OTG_FET_2) Out PTM services, USB services Icosa, Iowa
0x3B 0x3E 0x35000403 H, 6 Joy-Con(R) Wake Detect (EXTCON_DET_U) In Icosa, Hoag, Iowa
0x3C 0x26 0x3500040D E, 6 Joy-Con(L) Wake Detect (EXTCON_DET_S) In Icosa, Hoag, Iowa
0x3D -1 0x39000406
0x3E 0x33 0x35000404 G, 3 Joy-Con(R) CTS (checked low) (EXT_UART2_CTS) In HID services, AM services
0x3F 0x1C 0x3500040E D, 4 Joy-Con(L) CTS (checked low) (EXT_UART3_CTS) In HID services, AM services
0x40 0xD9 0x39000408 BB, 1 5V Step-Down Regulator Power (5V_STEPDOWN_EN) Out Copper
0x41 0x0C 0x04000401 B, 4 USB Root Port 2 Over Current (USB_B2_OC) In USB services Copper
0x42 0x0D 0x39000409 B, 5 5V Step-Down Regulator Power Good Flag (5V_STEPDOWN_PG) In Copper
0x43 0x21 0x04000402 E, 1 USB Power (USB_A_EN) Out USB services Copper
0x44 0x27 0x04000403 E, 7 USB Power Flag (USB_A_FLAG) In USB services Copper
0x45 0x92 0x04000404 S, 2 USB Root Port 3 Over Current (USB_B3_OC) In USB services Copper
0x46 0x95 0x04000405 S, 5 USB Root Port 3 Power (USB_B3_EN) Out USB services Copper
0x47 0x98 0x04000406 T, 0 USB Root Port 2 Power (USB_B2_EN) Out USB services Copper
0x48 0x10 0x34000004 C, 0 HDMI 5V (HDMI_5V_EN) Out NV services Copper, Calcio
0x49 0x11 0x04000407 C, 1 USB Root Port 1 Power (USB_B1_EN) Out USB services Copper, Calcio
0x4A 0x12 0x34000005 C, 2 HDMI/Power Delivery Switch (HDMI_PD_TR_EN) Out NV services Copper, Calcio
0x4B 0x42 0x3D000003 I, 2 Fan Enable (FAN_EN) Out PTM services Copper
0x4C 0xE6 0x04000408 CC, 6 USB Root Port 1 Over Current (USB_B1_OC) In USB services Copper, Calcio
[2.0.0+] 0x4D 0xAC 0x3D000001 V, 4 Pulse-Width Modulation Fan Control (PWM_FAN) Out PTM services Copper
[2.0.0+] 0x4E 0xE1 0x34000006 CC, 1 HDMI Hot Plug Detect (HDMI_INT_DP_HPD_PCC1) In NV services Copper, Calcio
[5.0.0+] 0x4F 0x56 0x3E000003 K, 6 MAX77812_IRQ In Hoag, Iowa, Calcio
[6.0.0+] 0x50 0x20 0xCA000001 E, 0 Out Hoag, Calcio
[6.0.0+] 0x51 0x21 0xCA000002 E, 1 Out Hoag, Calcio
[6.0.0+] 0x52 0x22 0xCA000003 E, 2 Out Hoag, Calcio
[6.0.0+] 0x53 0x23 0xCA000004 E, 3 Out Hoag, Calcio
[6.0.0+] 0x54 0x4C 0x36000004 J, 4 NFC_IRQ In NFC services Hoag
[6.0.0+] 0x55 0x57 0x36000003 K, 7 NFC_RST Out NFC services Hoag
[6.0.0+] 0x56 0x27 ([6.0.0-8.0.0] 0x94) 0x35000415 S, 4 MCU_IRQ In Hoag
[6.0.0+] 0x57 0x98 0x35000416 T, 0 MCU_BOOT Out HID services Hoag
[6.0.0+] 0x58 0x99 0x35000417 T, 1 MCU_RST Out HID services Hoag
[6.0.0+] 0x59 0xBB 0x39000403 X, 3 Fan Power (5V3) (VDD5V3_EN) Out PTM services Hoag, Iowa
[6.0.0+] 0x5A 0xE5 0x35000418 CC, 5 MCU_POR Out HID services Hoag
[6.0.0+] 0x5B 0xAB 0x35000005 V, 3 SioH Input (LCD_GPIO1_PV3) In HID services, AM services Hoag
[6.0.0+] 0x5C 0x4E 0x36000002 J, 6 NFC_EN Out NFC services Hoag
[7.0.0+] 0x5D 0x32 0x35000406 G, 2 Joy-Con(R) RTS (EXT_UART2_RTS) In
[7.0.0+] 0x5E 0x1B 0x35000410 D, 3 Joy-Con(L) RTS (EXT_UART3_RTS) In
[7.0.0+] 0x5F 0x17 0x3500041B C, 7 In Hoag
[7.0.0+] 0x60 0x18 0x3500041C D, 0 In Hoag
[7.0.0+] 0x61 0x15 0x3500041D C, 5 In Hoag
[7.0.0+] 0x62 0x16 0x3500041E C, 6 In Hoag

GpioPadDescriptor

Bits Description
7-5 Controller index
4-3 Port index
2-0 Pin number

I2cDevice

This is "nn::i2c::I2cDevice".

Name DeviceCode Port:Addr Is10bit Speed Max Retries Retry Delay Usage Used by (services) Used by (hardware)
0 0x350000C9 0:52 N 100000 0 0 DebugPadDriver HID services Icosa, Iowa
1 0x35000033 2:49 N 400000 0 0 TouchPanel HID services Icosa, Hoag, Iowa
2 0x3E000001 0:4C N 100000 0 0 Temperature Sensor (TMP451 or NCT72) PTM services Icosa, Copper, Hoag, Iowa, Calcio
3 0x3E000001 0:4C N 100000 0 0 Temperature Sensor (TMP451 or NCT72) (duplicate) PTM services Icosa, Copper, Hoag, Iowa, Calcio
4 0x33000001 0:1C N 100000 0 0 Audio Codec (ALC5639) Audio services, Fatal services Icosa, Hoag, Iowa
5 0x3B000001 4:68 N 400000 3 5000000 PMIC RTC (max77620_rtc0), max77620_irq0 PCV services Icosa, Copper
6 0x3A000001 4:3C N 400000 3 5000000 PMIC (MAX77620), max77620_irq0 PCV services Icosa, Copper
7 0x3A000003 4:1B N 400000 3 5000000 Sub-PMIC for CPU (max77621_cpu) PCV services Icosa, Copper
8 0x3A000004 4:1C N 400000 3 5000000 Sub-PMIC for GPU (max77621_gpu) PCV services Icosa, Copper
9 0x39000001 0:6B N 100000 3 5000000 Charger IC (BQ24193) PTM services Icosa, Hoag, Iowa
10 0x39000033 0:36 N 100000 3 5000000 Fuel Gauge IC (MAX17050) PTM services, PCV services Icosa, Hoag, Iowa
11 0x040000C9 0:18 N 100000 3 5000000 USB-PD controller (RHOM BM92T30MWV) USB services Icosa, Copper, Hoag, Iowa, Calcio
12 0x3F000401 1:40 N 400000 3 5000000 Power Monitor (ina226_V_VDD15V0-HB) nvdbgsvc Factory
13 0x3F000001 1:41 N 400000 3 5000000 Power Monitor (ina226_V_VSYS-CPU-DS or SdevMariko_ina226_VDD_CPU_AP) nvdbgsvc Factory
14 0x3F000002 1:44 N 400000 3 5000000 Power Monitor (ina226_V_VSYS-GPU-DS or SdevMariko_ina226_VDD_GPU_AP) nvdbgsvc Factory
15 0x3F000003 1:45 N 400000 3 5000000 Power Monitor (ina226_V_VSYS-DDR-DS or SdevMariko_ina226_V_VDD-DDR_1V1-PMIC) nvdbgsvc Factory
16 0x3F000402 1:46 N 400000 3 5000000 Power Monitor (ina226_V_VSYS-AP) nvdbgsvc Factory
17 0x3F000403 1:47 N 400000 3 5000000 Power Monitor (ina226_V_VSYS-BL-DS) nvdbgsvc Factory
18 0x35000047 1:29 N 400000 3 5000000 Ambient Light Sensor (BH1730) Backlight services Icosa, Hoag, Iowa
19 0x3F000404 1:48 N 400000 3 5000000 Power Monitor (ina226_V_SYS-CORE or SdevMariko_ina226_V_VDD-CORE-AP) nvdbgsvc Factory
20 0x3F000405 1:49 N 400000 3 5000000 Power Monitor (ina226_V_SOC-1V8 or SdevMariko_ina226_V_VDD_SOC-1V8) nvdbgsvc Factory
21 0x3F000406 1:4A N 400000 3 5000000 Power Monitor (ina226_V_LPDDR-1V8 or SdevMariko_ina226_V_VDD_1V8) nvdbgsvc Factory
22 0x3F000407 1:4B N 400000 3 5000000 Power Monitor (ina226_V_REG-1V32) nvdbgsvc Factory
23 0x3F000408 1:4D N 400000 3 5000000 Power Monitor (ina226_V_VDD-3V3-SYS) nvdbgsvc Factory
[2.0.0+] 24 0x34000001 3:50 N 100000 0 0 HDMI DDC NV services Copper, Calcio
[2.0.0+] 25 0x34000002 3:54 N 100000 0 0 HDMI SCDC NV services Copper, Calcio
[2.0.0+] 26 0x34000003 3:3A N 100000 0 0 HDMI HDCP NV services Copper, Calcio
[4.0.0+] 27 0x3A000005 4:52 ([4.0.0-8.0.0] 4:A4) N 400000 0 0 Buck Regulator (FAN53528) Hoag, Iowa, Calcio
[4.0.0+] 28 0x3A000002 4:33 ([4.0.0-8.0.0] 4:31) N 400000 0 0 PMIC (MAX77812) PCV services Hoag, Iowa, Calcio
[4.0.0+] 29 0x3A000002 4:33 ([4.0.0-8.0.0] 4:31) N 400000 0 0 PMIC (MAX77812) PCV services Hoag, Iowa, Calcio
[4.0.0+] 30 0x3F000409 1:4E N 400000 3 5000000 Power Monitor (SdevMariko_ina226_V_VDD_DDR_0V6) nvdbgsvc Factory
[8.0.0+] 31 0x36000001 1:08 N 400000 3 5000000 NFC IC NFC services Hoag

UartPort

Name DeviceCode (internal) DeviceCode (mapped) Port Usage
0 0x03000001 UART-A Invalid
1 0x03000004 0x37000001 UART-D Bluetooth
2 0x03000002 0x35000405 UART-B Joy-Con(R)
3 0x03000003 0x3500040F UART-C Joy-Con(L)
4 0x03000003 0x35000419 UART-C MCU

UartPortForDev

Name DeviceCode (internal) DeviceCode (mapped) Port Usage
0 0x03000001 UART-A Invalid
1 0x03000002 0x35000405 UART-B Joy-Con(R)
2 0x03000003 0x3500040F UART-C Joy-Con(L)
3 0x03000004 0x37000001 UART-D Bluetooth

ChannelName

This is "nn::pwm::ChannelName".

Name DeviceCode Interface Usage Used by
1 0x3D000001 PWM Channel 1 Fan PTM services
2 0x3400003D PWM Channel 0 Backlight Backlight services, NV services
3 0x35000065 PMC LED Soft Blink Led Bus services

AssignablePinGroupName

This is "nn::pinmux::AssignablePinGroupName".

Name Usage
0 GPIO(G, 0) and GPIO(G, 3)
1 GPIO(D, 1) and GPIO(D, 4)
2 Sdmmc1Clk or GPIO(M, 0), GPIO(M, 1), GPIO(M, 2), GPIO(M, 3), GPIO(M, 4) and GPIO(M, 5)
3 GPIO(V, 4)
100 Invalid

AssignablePinGroupNameForHardwareTest

This is "nn::pinmux::AssignablePinGroupNameForHardwareTest".

Name Usage
0 Invalid
1 Invalid
2 Invalid
3 Invalid
100 Uart4Tx, Uart4Rx, Uart4Rts and Uart4Cts

SasbusPort

Name DeviceCode Port Usage
0 0x3500003D SPI4 Joy-Con
Retrieved from "https://switchbrew.org/w/index.php?title=Bus_services&oldid=8908"