fsp-ldr
| Cmd | Name |
|---|---|
| 0 | MountCode |
| 1 | IsCodeMounted |
fsp-pr
| Cmd | Name |
|---|---|
| 0 | SetFsPermissions |
| 1 | ClearFsPermissions |
fsp-srv
| Cmd | Name |
|---|---|
| 0 | MountApplicationPackage |
| 1 | #Initialize |
| 2 | MountRomFs |
| 7 | #MountContent7 |
| 8 | #MountContent |
| 11 | #MountBis |
| 12 | #OpenBisPartition |
| 13 | InvalidateBisCache |
| 17 | OpenHostFileSystemImpl |
| 18 | MountSdCard |
| 19 | FormatSdCard |
| 21 | DeleteSaveData |
| 22 | #CreateSaveData |
| 23 | #CreateSystemSaveData |
| 24 | RegisterSaveDataAtomicDeletion |
| 25 | |
| 26 | FormatSdCardDryRun |
| 27 | |
| 30 | OpenGameCardPartition |
| 31 | MountGameCardPartition |
| 51 | #MountSavedata |
| 52 | #MountSystemSaveData |
| 53 | Returns an #IFileSystem. |
| 58 | ReadSaveDataFileSystemExtraData |
| 59 | |
| 60 | OpenSaveDataInfoReader |
| 61 | OpenSaveDataIterator |
| 80 | OpenSaveDataThumbnailFile |
| 100 | MountImageDirectory |
| 110 | #MountContentStorage |
| 200 | OpenHost |
| 202 | OpenDataStorageByDataId |
| 203 | Returns an #IStorage. |
| 400 | #OpenDeviceOperator |
| 500 | #OpenSdCardDetectionEventNotifier |
| 501 | #OpenGameCardDetectionEventNotifier |
| 600 | SetCurrentPosixTime |
| 601 | QuerySaveDataTotalSize |
| 602 | VerifySaveData |
| 603 | CorruptSaveDataForDebug |
| 604 | CreatePaddingFile |
| 605 | DeleteAllPaddingFiles |
| 606 | |
| 607 | RegisterExternalKey |
| 608 | UnregisterExternalKey |
| 609 | |
| 620 | |
| 800 | |
| 1000 | SetBisRootForHost |
| 1001 | |
| 1002 | SetSaveDataRootPath |
| 1003 | DisableAutoSaveDataCreation |
| 1004 | SetGlobalAccessLogMode |
| 1005 | GetGlobalAccessLogMode |
| 1006 | OutputAccessLogToSdCard |
MountApplicationPackage
Presumably about the same as MountContent except this uses the titleID associated with the FS session?
Initialize
| Word | Value |
|---|---|
| 0 | 0x00000004 |
| 1 | 0x8000000E |
| 2 | 0x00000001 |
| 0-1 | Pid |
| 0 | Always. 0x18000001 |
| 1 | Always. 0 |
| 2 | "SCFI" |
| 3 | 0x00000001 |
| 4 | Always 0. |
MountContent7
Takes an input u32 (NCA-type) and an u64 title-id. Web-applet loads the u32 from u32_table[inparam]. Only type4 is usable with this?
Returns an #IFileSystem.
Note: web-applet strings refer to both this cmd and the below "MountContent" as "MountContent".
MountContent
Takes a type-0x19 input buffer, an in32, and an input title-id.
The in32 must be 5 if the NCA type is 0 (control).
The input buffer is the output string path from nsam GetContentNcaPath.
Returns an #IFileSystem.
May return errors when attempting to access NCA-paths for an update-title with a gamecard, when the gamecard isn't inserted. May return error 0x7D402 in some cases with update-titles. Non-val2 in32 values with NCA-type1 are unusable, even for normal titles.
MountBis
Takes a type-0x19 input buffer string and a u32 Bis partitionID(see below). Official user-process code sets instr[0] = 0 normally.
Returns an #IFileSystem.
Only partitionIDs for FAT partitions are usable with this, otherwise error 0x2EE202 is returned. Seems to be about the same as #OpenBisPartition except this mounts the partition filesystem instead of allowing direct access to the partition sectors.
OpenBisPartition
Takes a u32 partition ID, returns 0x2EE202 for partitions which do not exist, 0x320002 for partitions which cannot be opened and a valid #IStorage handle otherwise.
CreateSaveData
Takes a 0x40-byte Save-struct entry, a 0x40-byte SaveCreate-struct entry, and a 0x10-byte input struct.
Only the first 0x5-bytes in the 0x10-byte struct are initialized: all-zero when automatically creating savedata during savecommon mount by official user-processes. In the dedicated save-creation code in official user-processes: +0 u32 = 0x40060, +4 u8 = 1.
Creates regular savedata.
CreateSystemSaveData
Takes a 0x40-byte Save-struct entry and a 0x40-byte SaveCreate-struct entry.
Creates savedata in the SYSTEM NAND partition.
MountSaveData
Takes an input u8 and a 0x40-byte Save-struct entry. Official user-process code is only known to use value 1 for the u8.
Returns an #IFileSystem.
MountSystemSaveData
Takes an input u8 and a 0x40-byte Save-struct entry. Web-applet only uses value0 for the input u8.
Returns an #IFileSystem.
Mounts savedata in the SYSTEM NAND partition.
MountContentStorage
Takes a #ContentStorageId. Invalid values return 0x2EE202.
Returns an #IFileSystem with NCA files. The read data from these files is identical to the data read by Content_Manager_services#ReadEntryRaw.
OpenDeviceOperator
This command returns a session to a port implementing the #IDeviceOperator interface.
OpenSdCardDetectionEventNotifier
This command returns a session to a port implementing the #IEventNotifier interface.
OpenGameCardDetectionEventNotifier
This command returns a session to a port implementing the #IEventNotifier interface.
IStorage
This is the interface for a raw device, usually a block device.
| Cmd | Name | Arguments |
|---|---|---|
| 0 | Read | Takes a type-0x46 buffer, an offset and length |
| 1 | Write | |
| 2 | Flush | |
| 3 | SetSize | |
| 4 | GetSize | None |
IFileSystem
There are two main implementations of this interface:
- RomFS: Filesystem implementation statically linked in the binary. Uses an #IStorage interface as underlying raw device.
- IPC proxy: Used for all non-RomFS filesystems. In this case, actual filesystem implementation is in the FS process.
| Cmd | Name |
|---|---|
| 0 | CreateFile |
| 1 | DeleteFile |
| 2 | CreateDirectory |
| 3 | DeleteDirectory |
| 4 | DeleteDirectoryRecursively |
| 5 | RenameFile |
| 6 | RenameDirectory |
| 7 | GetEntryType |
| 8 | OpenFile |
| 9 | OpenDirectory |
| 10 | Commit |
| 11 | GetFreeSpaceSize |
| 12 | GetTotalSpaceSize |
IDirectory
| Cmd | Name |
|---|---|
| 0 | Read |
| 1 | GetEntryCount |
IFile
| Cmd | Name |
|---|---|
| 0 | Read |
| 1 | Write |
| 2 | Flush |
| 3 | SetSize |
| 4 | GetSize |
ISaveDataInfoReader
IDeviceOperator
| Cmd | Name |
|---|---|
| 0 | IsSdCardInserted |
| 1 | GetSdCardSpeedMode |
| 2 | GetSdCardCid |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 100 | GetMmcCid |
| 101 | GetMmcSpeedMode |
| 110 | EraseMmc |
| 111 | GetMmcPartitionSize |
| 112 | |
| 113 | |
| 114 | |
| 200 | IsGameCardInserted |
| 201 | EraseGameCard |
| 202 | GetGameCardHandle |
| 203 | #GetGameCardUpdatePartitionInfo |
| 204 | FinalizeGameCardDriver |
| 205 | GetGameCardAttribute |
| 206 | GetGameCardDeviceCertificate |
| 207 | GetGameCardAsicInfo |
| 208 | GetGameCardIdSet |
| 209 | WriteToGameCard |
| 210 | SetVerifyWriteEnalbleFlag |
| 211 | GetGameCardImageHash |
| 212 | |
| 213 | |
| 214 | |
| 215 | |
| 216 | |
| 300 | SetSpeedEmulationMode |
| 301 | GetSpeedEmulationMode |
GetGameCardUpdatePartitionInfo
Returns a titleID and the title-version for it.
- Output u32 with ARMS-gamecard: title-version v131162. This is the title-version for 2.1.0, which is the sysupdate included with this gamecard. Launch-day gamecards return title-version v450.
- Output u64 with ARMS-gamecard: titleID 0100000000000816.
NS appears to only use this with Content_Manager_services#GetTitleIdInfo and Content_Manager_services#GetUpdateTitleList with storageid=nandsys, for checking whether a sysupdate is required.
IEventNotifier
| Cmd | Name |
|---|---|
| 0 | BindEvent |
StorageId
| Value | Name |
|---|---|
| 0 | None |
| 1 | Host |
| 2 | GameCard |
| 3 | NandSystem |
| 4 | NandUser |
| 5 | SdCard |
ContentStorageId
| Value | Name |
|---|---|
| 0 | NandSystem |
| 1 | NandUser |
| 2 | SdCard |
BisPartitionID
Save Struct
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x8 | 0 for SystemSaveData. SaveData: 0 can be used for accessing the savedata associated with the current FS session titleID, otherwise when set this is the titleID associated with the savedata to access. |
| 0x8 | 0x10 | userID for user-specific savedata(saveuser) when set, otherwise when zero this indicates the common savedata(savecommon). |
| 0x18 | 0x8 | u64 saveID. 0 for SaveData. |
| 0x20 | 0x8 | 0 for SystemSaveData. 1 for SaveData. 2 for DeviceSaveData(with official user-processes all other fields are 0 for DeviceSaveData). |
| 0x28 | 0x8 | 0 for SystemSaveData/SaveData. |
| 0x30 | 0x8 | 0 for SystemSaveData/SaveData. |
| 0x38 | 0x8 | 0 for SystemSaveData/SaveData. |
Total size is 0x40-bytes.
SaveCreate Struct
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x8 | IVFC level4 size? |
| 0x8 | 0x8 | Same as offset 0x0 normally? Hard-coded to 0x80000 for BcatSaveData. |
| 0x10 | 0x8 | 0x4000 for SystemSaveData/SaveData/DeviceSaveData/BcatSaveData. IVFC level4 block-size in bytes? |
| 0x18 | 0x8 | Official user-processes only uses 0 here for SystemSaveData/SaveData. For the dedicated save-creation code with SaveData/DeviceSaveData, this value comes from an input param with official user-processes. For BcatSaveData, this is the hard-coded titleID of the bcat-sysmodule. |
| 0x20 | 0x4 | Written using an input param for official user-processes. Hard-coded 0 for BcatSaveData. |
| 0x24 | 0x1 | Official user-processes only uses 0 here for SystemSaveData, 1 for SaveData/DeviceSaveData/BcatSaveData. |
| 0x25 | 0x1 | 0 for SystemSaveData/SaveData. |
| 0x26 | 0x1A | Not initialized for SystemSaveData/SaveData. |
Total size is 0x40-bytes.
DeviceSaveData
This is accessed using the same commands for SaveData with the same input u8, the only difference compared to SaveData is the Save-struct.
BcatSaveData
This is accessed using the same commands for SaveData with the same input u8. The Save-struct is the same as DeviceSaveData, except that the titleID field is set to <input titleID>. See above regarding SaveCreate-struct.
The 0x10-byte struct passed to #CreateSaveData has the first 0x5-bytes set to all-zero.