Profile Selector
This is the applet presented when launching a game that allows the user to select a user.
See AM_services#Library_Applets. The profile selector expects a two IStorage inputs and a single IStorage output.
Library Applet Versions
| System Version | Value |
|---|---|
| [1.0.0+] | 0x1 |
| [2.0.0+] | 0x10000 |
| [6.0.0+] | 0x20000 |
UiSettings
This is "nn::account::UiSettings".
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | #UiMode |
| 0x4 | 0x4 | |
| 0x8 | 0x80 | u128 invalidUidList[8]. This is copied from #UserSelectionSettings. |
| 0x88 | 0x8 | |
| 0x90 | 0x1 | u8 isNetworkServiceAccountRequired. This is copied from #UserSelectionSettings. |
| 0x91 | 0x1 | u8 isSkipEnabled. This is copied from #UserSelectionSettings. |
| 0x92 | 0x1 | |
| 0x93 | 0x1 | u8 isPermitted. |
| 0x94 | 0x1 | u8 showSkipButton. This is copied from #UserSelectionSettings. |
| 0x95 | 0x1 | u8 additionalSelect. This is copied from #UserSelectionSettings. |
| 0x96 | 0x1 | This is copied from #UserSelectionSettingsForSystemService. |
| 0x97 | 0x1 | |
| 0x98 | 0x4 | This is copied from #UserSelectionSettingsForSystemService. |
| 0x9C | 0x4 |
This has size 0xA0 (0x98 with [1.0.0]) and seems to only affect the UI display. Typical value is all zero with byte 0x96 equal to 0x01. Setting the first byte to 1 will make the applet display in order to create a new user. "starter" sets the first byte to 5 in order to display initial user setup.
[2.0.0+]: sdknso ShowUserSelectorForSystem now has an additional input param UserSelectionSettingsForSystemService: u8 +4 is copied to UiSettings+0x96, and u32 +0 is copied to UiSettings+0x98. sdknso ShowUserSelectorForLauncher/ShowUserSelector now sets u8 UiSettings+0x96 to value 1.
UiMode
This is "nn::account::UiMode".
| Value | Description |
|---|---|
| 0 | SelectUser |
| 1 | CreateUser |
| 2 | EnsureNsaAvailable |
| 3 | EditUserIcon |
| 4 | EditUserNickname |
| 5 | CreateUserForStarter |
| 6 | AcquireNintendoAccountAuthorization |
| 7 | IntroduceExternalNetworkServiceAccount |
| 8 | IntroduceExternalNetworkServiceAccountForRegistration |
| 9 | [3.0.0+] LinkAccountNnid |
| 10 | [6.0.0+] ShowLicenseRequirementsForNetworkService |
| 11 | [6.0.0+] ShowLicenseRequirementsForNetworkServiceWithUserContext |
| 12 | [8.0.0+] CreateUserForImmediateNaLoginTest |
UserSelectionSettings
This is "nn::account::UserSelectionSettings ".
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x80 | u128 invalidUidList[8] |
| 0x80 | 0x1 | u8 isSkipEnabled |
| 0x81 | 0x1 | u8 isNetworkServiceAccountRequired |
| 0x82 | 0x1 | u8 showSkipButton |
| 0x83 | 0x1 | u8 additionalSelect |
| 0x84 | 0x1 | u8 isUnqualifiedUserSelectable |
UserSelectionSettingsForSystemService
This is "nn::account::UserSelectionSettingsForSystemService".
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | |
| 0x4 | 0x1 | |
| 0x5 | 0x3 | u8 padding[3] |
UiResult
This is "nn::account::UiResult".
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x8 | Result (0 = Success, 2 = Failure) |
| 0x8 | 0x10 | UUID of selected user |
Usage
User-processes should push a common arguments struct and the typical UserSelectionConfig struct as well. After pushing in the data and calling start, user-processes should wait upon the PopOutDataEvent and then pop a single IStorage to obtain the result structure described above.