Glue services

arp:r

This is "nn::arp::detail::IReader".

Cmd	Name
0	GetApplicationLaunchProperty
1	[10.0.0+] GetApplicationControlProperty ([1.0.0-9.2.0] GetApplicationLaunchPropertyWithApplicationId)
2	[10.0.0+] GetApplicationProcessProperty ([1.0.0-9.2.0] GetApplicationControlProperty)
3	[10.0.0+] GetApplicationInstanceId ([1.0.0-9.2.0] GetApplicationControlPropertyWithApplicationId)
4	[10.0.0+] GetApplicationInstanceUnregistrationNotifier
5	[10.0.0+] ListApplicationInstanceId
6	[10.0.0+] GetMicroApplicationInstanceId
7	[10.0.0+] GetApplicationCertificate
9998	[9.0.0-9.2.0] GetPreomiaApplicationLaunchProperty
9999	[9.0.0-9.2.0] GetPreomiaApplicationControlProperty

GetApplicationLaunchProperty

Takes an input u64 ProcessId. Returns an #ApplicationLaunchProperty.

[10.0.0+] Now takes an input #ApplicationInstanceId instead of ProcessId.

GetApplicationLaunchPropertyWithApplicationId

Takes an input u64 ApplicationId. Returns an #ApplicationLaunchProperty.

GetApplicationControlProperty

Takes an input u64 ProcessId and a type-0x16 output buffer containing an ApplicationControlProperty. No output.

[10.0.0+] Now takes an input #ApplicationInstanceId instead of ProcessId.

GetApplicationControlPropertyWithApplicationId

Takes an input u64 ApplicationId and a type-0x16 output buffer containing an ApplicationControlProperty. No output.

GetApplicationProcessProperty

Takes an input #ApplicationInstanceId. Returns an #ApplicationProcessProperty.

GetApplicationInstanceId

Takes an input u64 ProcessId. Returns an #ApplicationInstanceId.

GetApplicationInstanceUnregistrationNotifier

No input. Returns an #IUnregistrationNotifier.

ListApplicationInstanceId

Takes a type-0x6 output buffer containing an array of #ApplicationInstanceId. Returns an s32 Count.

GetMicroApplicationInstanceId

Same as #GetApplicationInstanceId.

GetApplicationCertificate

Takes an input #ApplicationInstanceId and a type-0x16 output buffer containing an #ApplicationCertificate. No output.

GetPreomiaApplicationLaunchProperty

Same as #GetApplicationLaunchProperty.

GetPreomiaApplicationControlProperty

Same as #GetApplicationControlProperty.

IUnregistrationNotifier

This is "nn::arp::detail::IUnregistrationNotifier".

Cmd	Name
0	GetReadableHandle

GetReadableHandle

No input. Returns an output readable Event handle.

arp:w

This is "nn::arp::detail::IWriter".

Cmd	Name
0	AcquireRegistrar
1	[10.0.0+] UnregisterApplicationInstance ([1.0.0-9.2.0] DeleteProperties)
2	[10.0.0+] AcquireUpdater

AcquireRegistrar

No input. Returns an #IRegistrar.

UnregisterApplicationInstance

Takes an input #ApplicationInstanceId. No output.

AcquireUpdater

Takes an input #ApplicationInstanceId. Returns an #IUpdater.

IRegistrar

This is "nn::arp::detail::IRegistrar".

Cmd	Name
0	Issue
1	SetApplicationLaunchProperty
2	SetApplicationControlProperty

Issue

No input. Returns an output #ApplicationInstanceId.

SetApplicationLaunchProperty

Takes an input #ApplicationLaunchProperty. No output.

SetApplicationControlProperty

Takes a type-0x15 input buffer containing an ApplicationControlProperty. No output.

IUpdater

This is "nn::arp::detail::IUpdater".

Cmd	Name
0	Issue
1	SetApplicationProcessProperty
2	DeleteApplicationProcessProperty
3	SetApplicationCertificate

Issue

No input/output.

SetApplicationProcessProperty

Takes an input u64 ProcessId and an input #ApplicationProcessProperty. No output.

DeleteApplicationProcessProperty

No input/output.

SetApplicationCertificate

Takes a type-0x15 input buffer containing an #ApplicationCertificate. No output.

bgtc:t

This is "nn::bgtc::ITaskService".

[11.0.0+] This is "nn::bgtc::ITaskServiceRoot".

Cmd	Name
100	#OpenTaskService

OpenTaskService

No input. Returns an #ITaskService.

ITaskService

This is "nn::bgtc::ITaskService".

Cmd	Name
1	NotifyTaskStarting
2	NotifyTaskFinished
3	GetTriggerEvent
4	IsInHalfAwake
5	NotifyClientName
6	[3.0.0+] IsInFullAwake
11	ScheduleTask
12	GetScheduledTaskInterval
13	UnscheduleTask
14	GetScheduleEvent
15	SchedulePeriodicTask
16	[9.0.0+]
101	[3.0.0+] GetOperationMode
102	[3.0.0+] WillDisconnectNetworkWhenEnteringSleep
103	[3.0.0+] WillStayHalfAwakeInsteadSleep
200	[12.0.0+]

bgtc:sc

This is "nn::bgtc::IStateControlService".

Cmd	Name
1	GetState
2	GetStateChangedEvent
3	NotifyEnteringHalfAwake
4	NotifyLeavingHalfAwake
5	[3.0.0+] SetIsUsingSleepUnsupportedDevices

[10.0.0+] NotifyEnteringHalfAwake now takes 1-byte of input.

time:a, time:r, time:u

These are "nn::timesrv::detail::service::IStaticService".

These were added with [9.0.0+].

The time:u service has max_sessions 17, time:a has max_sessions 4, and time:r has max_sessions 2.

Cmd	Name	Notes
0	GetStandardUserSystemClock	Returns an #ISystemClock.
1	GetStandardNetworkSystemClock	Returns an #ISystemClock.
2	GetStandardSteadyClock	Returns an #ISteadyClock.
3	GetTimeZoneService	Returns an #ITimeZoneService.
4	GetStandardLocalSystemClock	Returns an #ISystemClock.
5	[4.0.0+] GetEphemeralNetworkSystemClock	Returns an #ISystemClock.
20	[6.0.0+] GetSharedMemoryNativeHandle
30	[6.0.0-8.1.0] GetStandardNetworkClockOperationEventReadableHandle
31	[6.0.0-8.1.0] GetEphemeralNetworkClockOperationEventReadableHandle
50	[4.0.0+] SetStandardSteadyClockInternalOffset
51	[9.0.0+] GetStandardSteadyClockRtcValue
100	IsStandardUserSystemClockAutomaticCorrectionEnabled
101	SetStandardUserSystemClockAutomaticCorrectionEnabled
102	[5.0.0+] GetStandardUserSystemClockInitialYear
200	[3.0.0+] IsStandardNetworkSystemClockAccuracySufficient
201	[6.0.0+] GetStandardUserSystemClockAutomaticCorrectionUpdatedTime
300	[4.0.0+] CalculateMonotonicSystemClockBaseTimePoint
400	[4.0.0+] GetClockSnapshot
401	[4.0.0+] GetClockSnapshotFromSystemClockContext
500	[4.0.0+] CalculateStandardUserSystemClockDifferenceByUser
501	[4.0.0+] CalculateSpanBetween

ISteadyClock

This is "nn::timesrv::detail::service::ISteadyClock".

Cmd	Name	Notes
0	GetCurrentTimePoint	No input, returns an output #SteadyClockTimePoint.
2	GetTestOffset	No input, returns an output #TimeSpanType.
3	SetTestOffset	Takes an input #TimeSpanType, no output.
100	[2.0.0+] GetRtcValue	No input, returns an output s64.
101	[2.0.0+] IsRtcResetDetected	No input, returns an output u8 bool.
102	[2.0.0+] GetSetupResultValue	No input, returns an output u32.
200	[3.0.0+] GetInternalOffset	No input, returns an output #TimeSpanType.
201	[3.0.0-3.0.2] SetInternalOffset	Takes an input #TimeSpanType, no output.

SteadyClockTimePoint

Offset	Size	Description
0x0	0x8	A u64 representing a point in time.
0x8	0x10	An ID representing the clock source.

This is a 0x18-byte struct.

TimeSpanType

This is an u64.

ISystemClock

This is "nn::timesrv::detail::service::ISystemClock".

Cmd	Name	Notes
0	GetCurrentTime	Returns an output #PosixTime.
1	SetCurrentTime	Takes an input #PosixTime.
2	GetSystemClockContext	Returns an output #SystemClockContext.
3	SetSystemClockContext	Takes an input #SystemClockContext.
4	[9.0.0+] GetOperationEventReadableHandle

PosixTime

This is an s64 for UTC POSIX time.

SystemClockContext

This is an 0x20-byte struct.

Offset	Size	Description
0x0	0x8	a #PosixTime representing the system clock epoch.
0x8	0x18	a #SteadyClockTimePoint

ITimeZoneService

This is "nn::timesrv::detail::service::ITimeZoneService".

Cmd	Name	Notes
0	GetDeviceLocationName	No input, returns an output #LocationName.
1	SetDeviceLocationName	Takes an input #LocationName, no output.
2	GetTotalLocationNameCount	No input, returns an output s32.
3	LoadLocationNameList
4	LoadTimeZoneRule	Takes an input #LocationName and a type-0x16 output buffer for #TimeZoneRule, no output.
5	[2.0.0+] GetTimeZoneRuleVersion	No input, returns an output #TimeZoneRuleVersion.
6	[5.0.0+] GetDeviceLocationNameAndUpdatedTime
7	[9.0.0+] SetDeviceLocationNameWithTimeZoneRule
8	[9.0.0+] ParseTimeZoneBinary	Stubbed, return 0x7BC74.
20	[9.0.0+] GetDeviceLocationNameOperationEventReadableHandle
100	ToCalendarTime	Takes an input #PosixTime and a type-0x15 input buffer for #TimeZoneRule, returns an output #CalendarTime and #CalendarAdditionalInfo.
101	ToCalendarTimeWithMyRule	Takes an input #PosixTime, returns an output #CalendarTime and #CalendarAdditionalInfo.
201	ToPosixTime	Takes an input #CalendarTime, a type-0x15 input buffer for #TimeZoneRule, an type-0xA output buffer for #PosixTime array, and returns an output s32.
202	ToPosixTimeWithMyRule	Takes an input #CalendarTime, an type-0xA output buffer for #PosixTime array, and returns an output s32.

LoadLocationNameList

Takes an input s32 LocationName_index and a type-0x6 output buffer for #LocationName, returns an output s32 for total output entries.

LocationName

This contains a TimeZone location string with a max size of 0x24 bytes.

TimeZoneRule

This is an 0x4000-byte struct. Official sw uses fixed-size 0x4000 for the buffer size with the above commands.

This is loaded from the TimeZoneBinary title with the specified LocationName under the zoneinfo/ directory, the content is then converted into this TimeZoneRule structure.

The files contained under zoneinfo/ directory are Tzif2 files without Tzif1 header and data at the begining of them (see RFC8536 for more information).

The conversion of a Tzif2 file to a TimeZoneRule structure is based on tz database code with some custom modifications (Leap seconds aren't handled, no usage of "posixrules" and Tzif1 support stripped out).

Offset	Size	Description
0x0	0x4	timecnt
0x4	0x4	typecnt
0x8	0x4	charcnt
0xC	0x1	goback
0xD	0x1	goahead
0xE	0x2	Padding
0x10	0x8 * 1000	ats
0x1f50	0x1 * 1000	types
0x2338	0x10 * 128	ttis (time type information), struct ttinfo[1000]
0x2b38	0x1 * 512	chars
0x2d38	0x4	defaulttype
0x2d3c	0x12c4	Reserved / Unused

ttinfo

This is an 0x10-byte struct. Represent a Time Type Information used in #TimeZoneRule.

Offset	Size	Description
0x0	0x4	tt_gmtoff
0x4	0x1	tt_isdst
0x5	0x3	Padding
0x8	0x4	tt_abbrind
0xC	0x1	tt_ttisstd
0xD	0x1	tt_ttisgmt
0xE	0x2	Padding

TimeZoneRuleVersion

This is an u128.

CalendarTime

Offset	Size	Description
0x0	0x2	Year
0x2	0x1	Month
0x3	0x1	Day
0x4	0x1	Hour
0x5	0x1	Minute
0x6	0x1	Second
0x7	0x1	Padding / unknown?

This is an 0x8-byte struct.

CalendarAdditionalInfo

Offset	Size	Description
0x0	0x4	0-based day-of-week.
0x4	0x4	0-based day-of-year.
0x8	0x8	Timezone name string.
0x10	0x4	0 = no DST, 1 = DST.
0x14	0x4	s32 seconds relative to UTC for this timezone.

This is an 0x18-byte struct. This stores timezone info.

notif:a

This is "nn::notification::server::INotificationServicesForApplication".

This was added with [9.0.0+].

Cmd	Name
500	#RegisterAlarmSetting
510	#UpdateAlarmSetting
520	#ListAlarmSettings
530	#LoadApplicationParameter
540	#DeleteAlarmSetting
1000	#Initialize

RegisterAlarmSetting

Takes a type-0x15 input buffer #AlarmSetting and a type-0x5 input buffer. Returns an #AlarmSettingId.

The second buffer can be empty (addr=0/size=0). Size must be <=0x400. This is the ApplicationParameter.

A maximum of 8 Alarms can be registered by an Application at the same time.

Before using the cmd, sdknso uses hid IsFirmwareUpdateNeededForNotification then if needed launches the controller-applet for firmware-update.

After using the cmd when it failed, ShowError will be used when the Result is in a certain range, otherwise this will assert.

UpdateAlarmSetting

Takes a type-0x15 input buffer #AlarmSetting and a type-0x5 input buffer. No output.

The second buffer can be empty (addr=0/size=0). Size must be <=0x400. This is the ApplicationParameter.

ListAlarmSettings

Takes a type-0x6 output buffer to receive an array of #AlarmSetting. Returns a s32 AlarmSettingsCount.

LoadApplicationParameter

Takes an input #AlarmSettingId and a type-0x6 output buffer containing the ApplicationParameter. Returns an u32 actual_size.

DeleteAlarmSetting

Takes an input #AlarmSettingId.

Initialize

Takes a PID-descriptor and an input u64 pid_reserved.

notif:s

This is "nn::notification::server::INotificationServices".

This was added with [9.0.0+].

Cmd	Name
500	#RegisterAlarmSetting
510	#UpdateAlarmSetting
520	#ListAlarmSettings
530	#LoadApplicationParameter
540	#DeleteAlarmSetting
1000
1010	#ListNotifications
1020	#DeleteNotification
1030	#ClearNotifications
1040	#OpenNotificationSystemEventAccessor
1500	#SetPresentationSetting
1510	#GetPresentationSetting
2000	#GetAlarmSetting
2001
2010	#MuteAlarmSetting
2020	#IsAlarmSettingReady
8000
8010
8999	[10.0.0+]
9000	#GetNextAlarm

Cmd1000

No input, returns a total of 4-bytes of output.

ListNotifications

Unofficial name.

DeleteNotification

Unofficial name.

ClearNotifications

Unofficial name.

No input/output.

OpenNotificationSystemEventAccessor

Unofficial name.

No input, returns an output #INotificationSystemEventAccessor.

INotificationSystemEventAccessor

This is "nn::notification::server::INotificationSystemEventAccessor".

This was added with [9.0.0+].

Cmd	Name
0

Cmd0: no input, returns an output handle.

SetPresentationSetting

Unofficial name.

GetPresentationSetting

Unofficial name.

GetAlarmSetting

Unofficial name.

Takes an input #AlarmSettingId. Returns an #AlarmSetting.

MuteAlarmSetting

Unofficial name.

Takes an input #AlarmSettingId and a bool.

IsAlarmSettingReady

Unofficial name.

Takes an input #AlarmSettingId. Returns a bool.

GetNextAlarm

Unofficial name.

Takes an input #AlarmSettingId. Returns an u8 IsAlarmScheduled and a PosixTime for the next scheduled alarm.

ectx:w

This is "nn::err::context::IWriterForSystem".

This was added with [11.0.0+].

Cmd	Name
0	#CreateContextRegistrar
1	CommitContext
2

CreateContextRegistrar

No input. Returns an #IContextRegistrar.

IContextRegistrar

This is "nn::err::context::IContextRegistrar".

Cmd	Name
0	Complete

ectx:r

This is "nn::err::context::IReaderForSystem".

This was added with [11.0.0+].

Cmd	Name
0	GetContextInfo
1	PullContext
2	ListContextDescriptorWithResultForDebug

ectx:aw

This is "nn::err::context::IWriterForApplication".

This was added with [11.0.0+].

Cmd	Name
0	#CreateContextRegistrar
1	CommitContext

ApplicationInstanceId

This is "nn::arp::ApplicationInstanceId".

This is an u64 ID bound to an application instance.

ApplicationKind

This is "nn::arp::ApplicationKind".

Value	Description
0	Application
1	MicroApplication

ApplicationLaunchProperty

This is "nn::arp::ApplicationLaunchProperty".

This is a 0x10-byte struct.

Offset	Size	Description
0x00	0x08	Id
0x08	0x04	Version
0x0C	0x01	Storage
0x0D	0x01	PatchStorage
0x0E	0x01	Kind
0x0F	0x01	Reserved

ApplicationProcessProperty

This is "nn::arp::ApplicationProcessProperty".

This is a 0x1-byte struct.

Offset	Size	Description
0x00	0x01	ProgramIndex

ApplicationCertificate

This is "nn::arp::ApplicationCertificate".

This is a 0x528-byte struct.

AlarmSettingId

This is "nn::notification::AlarmSettingId". This is an u16.

AlarmSetting

This is "nn::notification::AlarmSetting". Total size is 0x40 bytes. When initializing this to the defaults, the entire struct is cleared then the last 0xE-bytes are set to 0xFF.

Offset	Size	Description
0x00	0x02	#AlarmSettingId
0x02	0x01	Kind (0 = WeeklySchedule)
0x03	0x01	u8 bool Muted (non-zero/true = AlarmSetting turned off, zero/false = on).
0x04	0x04	Padding
0x08	0x10	UID. User account associated with this AlarmSetting. Used for the PreselectedUser when launching the Application when the system was previously in sleep-mode, instead of launching the applet for selecting the user.
0x18	0x08	ApplicationId
0x20	0x08	Not set by sdksno, besides clearing it during initialization.
0x28	0x18	Alarm schedule (WeeklyScheduleAlarmSetting)

Schedule:

Offset	Size	Description
0x00	0x0A	Not set by sdksno, besides clearing it during initialization.
0x0A	0xE(7*2)	Array of 7 entries where each entry is 2-bytes. Index is nn::time::DayOfWeek, Sun-Sat.

Array entries:

Each byte is set using an input s32. An entry with value 0xFFFF (the default) indicates that it's disabled. The high byte is the hour, the low byte is the minute. This uses local-time.

sdknso checks whether an entry is enabled with: return ({last 5-bits of the entry} < 3) && ((entry & 0xfc) < 60);. The first check is equivalent to comparing the second entry byte with value 24.