PTM services

fan

This is "nn::fan::detail::IManager".

Cmd	Name
0	OpenController

IController

This is "nn::fan::detail::IController".

Cmd	Name
0	SetRotationSpeedLevel
1	SetRotationSpeedLevelByDiff
2	GetRotationSpeedLevel
3	SetRotationRate
4	GetRotationRate
5	[1.0.0-6.2.0] EnableFan
6	[1.0.0-6.2.0] DisableFan
7	[1.0.0-6.2.0] GetActualRotationSpeedLevel

[7.0.0+] SetRotationSpeedLevelByDiff/SetRotationRate no longer takes any input. GetRotationRate no longer returns output. These were presumably replaced with new cmds?

psm

This is "nn::psm::IPsmServer".

Cmd	Name
0	#GetBatteryChargePercentage
1	#GetChargerType
2	#EnableBatteryCharging
3	#DisableBatteryCharging
4	#IsBatteryChargingEnabled
5	#AcquireControllerPowerSupply
6	#ReleaseControllerPowerSupply
7	#OpenSession
8	#EnableEnoughPowerChargeEmulation
9	#DisableEnoughPowerChargeEmulation
10	#EnableFastBatteryCharging
11	#DisableFastBatteryCharging
12	#GetBatteryVoltageState
13	#GetRawBatteryChargePercentage
14	#IsEnoughPowerSupplied
15	#GetBatteryAgePercentage
16	#GetBatteryChargeInfoEvent
17	#GetBatteryChargeInfoFields
18	[3.0.0+] GetBatteryChargeCalibratedEvent

GetBatteryChargePercentage

No input, returns an output u32.

GetChargerType

No input, returns an output u32.

EnableBatteryCharging

No input/output.

DisableBatteryCharging

No input/output.

IsBatteryChargingEnabled

No input, returns an output u8.

AcquireControllerPowerSupply

No input/output.

ReleaseControllerPowerSupply

No input/output.

OpenSession

No input, returns an output #IPsmSession.

EnableEnoughPowerChargeEmulation

No input/output.

DisableEnoughPowerChargeEmulation

No input/output.

EnableFastBatteryCharging

No input/output.

DisableFastBatteryCharging

No input/output.

GetBatteryVoltageState

No input, returns an output u32.

GetRawBatteryChargePercentage

No input, returns an output double.

IsEnoughPowerSupplied

No input, returns an output bool.

GetBatteryAgePercentage

No input, returns an output double.

GetBatteryChargeInfoEvent

No input, returns an output Event handle.

GetBatteryChargeInfoFields

No input, returns an output 0x40-byte struct.

IPsmSession

This is "nn::psm::IPsmSession".

Cmd	Name
0	#BindStateChangeEvent
1	#UnbindStateChangeEvent
2	#SetChargerTypeChangeEventEnabled
3	#SetPowerSupplyChangeEventEnabled
4	#SetBatteryVoltageStateChangeEventEnabled

BindStateChangeEvent

No input, returns an output event with autoclear disabled.

UnbindStateChangeEvent

No input/output.

SetChargerTypeChangeEventEnabled

Takes an input u8 bool, no output.

SetPowerSupplyChangeEventEnabled

Takes an input u8 bool, no output.

SetBatteryVoltageStateChangeEventEnabled

Takes an input u8 bool, no output.

tc

This is "nn::tc::IManager".

Cmd	Name
0	SetOperatingMode
1	GetThermalEvent
2	IsActionAllowed
3	EnableVirtualTemperature
4	DisableVirtualTemperature
5	SetVirtualTemperature
6	EnableFanControl
7	DisableFanControl
8	IsFanControlEnabled
9	[5.0.0+] GetSkinTemperatureMilliC

ts

This is "nn::ts::server::IMeasurementServer".

Cmd	Name
0	#GetTemperatureRange
1	#GetTemperature
2	#SetMeasurementMode
3	#GetTemperatureMilliC
4	[8.0.0+] ? (Takes a total of 4-bytes of input, returns an #IUnknown0)

IUnknown0

Added with [8.0.0+].

Cmd	Name
0
1
2
3
4	[10.0.0+]

GetTemperatureRange

Takes an u8 #Location and returns an s32 minimum temperature + s32 maximum temperature.

The returned temperature values are in Celsius.

GetTemperature

Takes an u8 #Location and returns an output s32.

The output is the temperature in Celsius.

SetMeasurementMode

Takes an u8 #Location and an u8 MeasurementMode, no output.

GetTemperatureMilliC

Takes an u8 #Location and returns an output s32.

The output is the temperature in MilliC.

Location

Value	Name
0	Internal
1	External

pcm

This is "nn::pcm::IManager".

[4.0.0+] This service was moved to nvdbgsvc and is only available to SDEV units.

Cmd	Name
0	IsSupported
1	ReadCurrentPower
2	[4.0.0+] IsServiceEnabled
3	[4.0.0+] ReadCurrentVoltage

apm:am

This is "nn::apm::IManager".

This was added with [8.0.0+] and replaces the old apm service.

Cmd	Name
0	#OpenSession
1	GetPerformanceMode
6	[7.0.0+] #IsCpuOverclockEnabled

OpenSession

Returns an #ISession.

IsCpuOverclockEnabled

No input, returns an output u8 bool.

apm:sys

This is "nn::apm::ISystemManager".

Cmd	Name
0	RequestPerformanceMode
1	GetPerformanceEvent
2	GetThrottlingState
3	GetLastThrottlingState
4	ClearLastThrottlingState
5	[5.0.0+] LoadAndApplySettings
6	[7.0.0+] #SetCpuBoostMode
7	[7.0.0+] #GetCurrentPerformanceConfiguration

GetPerformanceEvent

Returns an #ISession.

SetCpuBoostMode

Takes an u32 #CpuBoostMode.

CpuBoostMode

Mode	Description
0	Disabled.
1	Boost CPU. Additionally, throttle GPU to minimum. Use performance configurations 0x92220009 and 0x9222000A, or 0x9222000B and 0x9222000C.
2	Conserve power. Only throttle GPU to minimum. Use performance configurations 0x9222000B and 0x9222000C.

GetCurrentPerformanceConfiguration

Returns the currently active #PerformanceConfiguration (default value is 0x00020003).

ISession

This is "nn::apm::ISession".

Cmd	Name
0	SetPerformanceConfiguration
1	GetPerformanceConfiguration
2	[8.0.0+] #SetCpuOverclockEnabled

SetPerformanceConfiguration

Takes an u32 #PerformanceMode and an u32 #PerformanceConfiguration.

GetPerformanceConfiguration

Takes an u32 #PerformanceMode and returns an output u32 #PerformanceConfiguration.

SetCpuOverclockEnabled

Takes an input u8 bool, no output.

PerformanceMode

Value	Name
0	Normal
1	Boost

PerformanceConfiguration

Value	CPU clock	GPU clock	Memory clock
0x00010000	1020.0	384.0	1600.0
0x00010001	1020.0	768.0	1600.0
0x00010002	1224.0	691.2	1600.0
0x00020000	1020.0	230.4	1600.0
0x00020001	1020.0	307.2	1600.0
0x00020002	1224.0	230.4	1600.0
0x00020003	1020.0	307.2	1331.2
0x00020004	1020.0	384.0	1331.2
0x00020005	1020.0	307.2	1065.6
0x00020006	1020.0	384.0	1065.6
0x92220007	1020.0	460.8	1600.0
0x92220008	1020.0	460.8	1331.2
[7.0.0+] 0x92220009	1785.0	76.8	1600.0
[7.0.0+] 0x9222000A	1785.0	76.8	1331.2
[7.0.0+] 0x9222000B	1020.0	76.8	1600.0
[7.0.0+] 0x9222000C	1020.0	76.8	1331.2

Clocks are all in MHz.

Configurations 0x10001 and 0x20000 are only available while docked. Configurations 0x10002 and 0x20002 are only available for SDEV units.

fgm, fgm:0, fgm:1, fgm:2, fgm:3, fgm:4, fgm:5, fgm:6, fgm:7, fgm:9

These are "nn::fgm::sf::ISession".

Each service represents a different priority from 0 to 9. The "fgm" service represents priority 8 (default).

[2.0.0+] Only "fgm", "fgm:0" and "fgm:9" are now valid.

Cmd	Name
0	#Initialize

Initialize

No input. Returns an #IRequest.

IRequest

This is "nn::fgm::sf::IRequest".

Cmd	Name
0	Initialize
1	Set
2	Get
3	Cancel

Initialize

Takes a PID-descriptor, a #Module and an u64. Returns an Event handle with EventClearMode 0.

Set

Takes 2 u32s ClockMinRate and ClockMaxRate. No output.

Get

No input. Returns an u32 ClockRate.

Cancel

No input/output.

fgm:dbg

This is "nn::fgm::sf::IDebugger".

Cmd	Name
0	Initialize
1	Read
2	Cancel

lbl

This is "nn::lbl::detail::ILblController". This was moved from lbl with [10.0.0+].

Cmd	Name
0	SaveCurrentSetting
1	LoadCurrentSetting
2	SetCurrentBrightnessSetting
3	GetCurrentBrightnessSetting
4	ApplyCurrentBrightnessSettingToBacklight
5	GetBrightnessSettingAppliedToBacklight
6	SwitchBacklightOn
7	SwitchBacklightOff
8	GetBacklightSwitchStatus
9	EnableDimming
10	DisableDimming
11	IsDimmingEnabled
12	EnableAutoBrightnessControl
13	DisableAutoBrightnessControl
14	IsAutoBrightnessControlEnabled
15	SetAmbientLightSensorValue
16	#GetAmbientLightSensorValue
17	SetBrightnessReflectionDelayLevel
18	GetBrightnessReflectionDelayLevel
19	SetCurrentBrightnessMapping
20	GetCurrentBrightnessMapping
21	SetCurrentAmbientLightSensorMapping
22	GetCurrentAmbientLightSensorMapping
23	[3.0.0+] IsAmbientLightSensorAvailable
24	[3.0.0+] SetCurrentBrightnessSettingForVrMode
25	[3.0.0+] GetCurrentBrightnessSettingForVrMode
26	[3.0.0+] #EnableVrMode
27	[3.0.0+] #DisableVrMode
28	[3.0.0+] #IsVrModeEnabled
29	[7.0.0+] IsAutoBrightnessControlSupported

Ambient Light Sensor Notes

The BH1730 outputs 2 values. Visible light and IR light. This is then calculated through an algorithm that checks for Gain, Measurement time, filter qualities and ouputs lux (max correct measurement of 100K lux). The default values are Gain 64x and ITIME of 38 (256 - 218). This allows for a max lux value of 17972 lux when visible light value is maximum and IR light is 0. When both of them are on their limit, the output is 1192 lux. The sensor is fully configurable.

GetAmbientLightSensorValue

No input. Before 5.x, outputs lux in float. (5.0.0+) Returns an output struct:

Offset	Size	Description
0x0	0x4	bOverLimit. (u32) Equals to 1 if visible or IR light data is over 65534.
0x4	0x4	fLux. (float) Value in lux from the ambient light sensor.

Note: if bOverLimit=1 and the default ALS configuration is used, the measurement of fLux should not be considered and the actual max value depends on the type of light. Ranges from 12.5K - 17.5K.

GetCurrentBrightnessSetting

No input. Returns an output u32 int of the current backlight level.

GetBrightnessSettingAppliedToBacklight

No input. Returns an output u32 int of the backlight level computed from the ambient light sensor.

IsAutoBrightnessControlEnabled

No input. Returns an output u8 bool indicating whether auto brightness is enabled.

EnableVrMode

No input/output. Used by AM_services#SetVrModeEnabled.

Sets a global state field to 0x1.

DisableVrMode

No input/output. Used by AM_services#SetVrModeEnabled.

Sets the global state field used by #EnableVrMode to 0x0.

IsVrModeEnabled

No input. Returns an output u8 bool set by the above commands.

Module

This is "nn::fgm::Module".

Name	Block
0	CPU
1	GPU
2	EMC
3	SCLK
4	MSELECT
5	NVDEC
6	NVENC
7	NVJPG

Settings

Key	Size	Notes
background_download_stress_testing_storage	strlen	"sdcard", "builtin", "system".
battery_draining_enabled	1	?
fs_access_log_mode	strlen	"log", "sdcard", "log+sdcard", "off".
fs_speed_emulation_mode	strlen	"faster", "slower", "random", "off".
host_romfs_redirection_target	strlen	"builtin", "off".
idle_time_detect_mode	strlen	"on", "off".
initial_tick_value	strlen	"7days", "14days", "30days", "90days", "hex": ?.
memory_mode	strlen	"auto", "4GB", "6GB".
needs_update_vulnerability_policy	strlen	"default": ?, "force_true": ?, "force_false": ?.
operation_mode_policy	strlen	"auto": ?, "handheld", "console".
performance_mode_policy	strlen	"auto": use boost mode when docked. "normal": never use boost mode. "boost": always use boost mode (SDEV only).
screenshot_target	strlen	"screenshot": ?, "physical": ?.
sdev_cpu_overclock_enabled	1	SDEV only. Used to allow access to 1224MHz CPU mode.
sdev_throttling_additional_delay_us	4	SDEV only.
sdev_throttling_additional_delay_enabled	1	SDEV only.
sleep_mode	strlen	"default": ?, "pseudo": ?.
throttling_for_smpd_enabled	1	Not used as of 3.0.
throttling_for_undock_enabled	1	Not used as of 3.0.