Difference between revisions of "Bus services"
Line 694: | Line 694: | ||
{| class="wikitable sortable" border="1" | {| class="wikitable sortable" border="1" | ||
|- | |- | ||
− | ! Name || DeviceCode || Port:Addr || Is10bit || Speed || Max Retries || Retry Delay || Description || Used by (services) || Used by (hardware) | + | ! Value || Name || DeviceCode || Port:Addr || Is10bit || Speed || Max Retries || Retry Delay || Description || Used by (services) || Used by (hardware) |
|- | |- | ||
− | | 0 || 0x350000C9 || 0:52 || N || 100000 || 0 || 0 || | + | | 0 || ClassicController || 0x350000C9 || 0:52 || N || 100000 || 0 || 0 || DebugPad Driver || [[HID services]] || Icosa, Iowa, Unknown |
|- | |- | ||
− | | 1 || 0x35000033 || 2:49 || N || 400000 || 0 || 0 || TouchPanel || [[HID services]] || Icosa, Hoag, Iowa, Unknown | + | | 1 || Ftm3bd56 || 0x35000033 || 2:49 || N || 400000 || 0 || 0 || TouchPanel || [[HID services]] || Icosa, Hoag, Iowa, Unknown |
|- | |- | ||
− | | 2 || 0x3E000001 || 0:4C || N || 100000 || 0 || 0 || Temperature Sensor | + | | 2 || Tmp451 || 0x3E000001 || 0:4C || N || 100000 || 0 || 0 || Temperature Sensor || [[PTM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
|- | |- | ||
− | | 3 || 0x3E000001 || 0:4C || N || 100000 || 0 || 0 || Temperature Sensor | + | | 3 || Nct72 || 0x3E000001 || 0:4C || N || 100000 || 0 || 0 || Temperature Sensor || [[PTM services]] || Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
|- | |- | ||
− | | 4 || 0x33000001 || 0:1C || N || 100000 || 0 || 0 || Audio Codec | + | | 4 || Alc5639 || 0x33000001 || 0:1C || N || 100000 || 0 || 0 || Audio Codec || [[Audio services]], [[Fatal services]] || Icosa, Hoag, Iowa, Unknown |
|- | |- | ||
− | | 5 || 0x3B000001 || 4:68 || N || 400000 || 3 || 5000000 || PMIC RTC | + | | 5 || Max77620Rtc || 0x3B000001 || 4:68 || N || 400000 || 3 || 5000000 || PMIC RTC || [[PCV services]] || Icosa, Copper |
|- | |- | ||
− | | 6 || 0x3A000001 || 4:3C || N || 400000 || 3 || 5000000 || PMIC | + | | 6 || Max77620Pmic || 0x3A000001 || 4:3C || N || 400000 || 3 || 5000000 || PMIC || [[PCV services]] || Icosa, Copper |
|- | |- | ||
− | | 7 || 0x3A000003 || 4:1B || N || 400000 || 3 || 5000000 || Sub-PMIC for CPU | + | | 7 || Max77621Cpu || 0x3A000003 || 4:1B || N || 400000 || 3 || 5000000 || Sub-PMIC for CPU || [[PCV services]] || Icosa, Copper |
|- | |- | ||
− | | 8 || 0x3A000004 || 4:1C || N || 400000 || 3 || 5000000 || Sub-PMIC for GPU | + | | 8 || Max77621Gpu || 0x3A000004 || 4:1C || N || 400000 || 3 || 5000000 || Sub-PMIC for GPU || [[PCV services]] || Icosa, Copper |
|- | |- | ||
− | | 9 || 0x39000001 || 0:6B || N || 100000 || 3 || 5000000 || Charger IC | + | | 9 || Bq24193 || 0x39000001 || 0:6B || N || 100000 || 3 || 5000000 || Charger IC || [[PTM services]] || Icosa, Hoag, Iowa, Unknown |
|- | |- | ||
− | | 10 || 0x39000033 || 0:36 || N || 100000 || 3 || 5000000 || Fuel Gauge IC | + | | 10 || Max17050 || 0x39000033 || 0:36 || N || 100000 || 3 || 5000000 || Fuel Gauge IC || [[PTM services]], [[PCV services]] || Icosa, Hoag, Iowa, Unknown |
|- | |- | ||
− | | 11 || 0x040000C9 || 0:18 || N || 100000 || 3 || 5000000 || USB-PD controller | + | | 11 || Bm92t30mwv || 0x040000C9 || 0:18 || N || 100000 || 3 || 5000000 || USB-PD controller || [[USB services]] || Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
|- | |- | ||
− | | 12 || 0x3F000401 || 1:40 || N || 400000 || 3 || 5000000 || Power Monitor | + | | 12 || Ina226Vdd15v0Hb || 0x3F000401 || 1:40 || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 13 || 0x3F000001 || 1:41 || N || 400000 || 3 || 5000000 || Power Monitor | + | | 13 || Ina226VsysCpuDs or Ina226VddCpuAp (SdevMariko) || 0x3F000001 || 1:41 || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 14 || 0x3F000002 || 1:44 || N || 400000 || 3 || 5000000 || Power Monitor | + | | 14 || Ina226VsysGpuDs or Ina226VddGpuAp (SdevMariko) || 0x3F000002 || 1:44 || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 15 || 0x3F000003 || 1:45 || N || 400000 || 3 || 5000000 || Power Monitor | + | | 15 || Ina226VsysDdrDs or Ina226VddDdr1V1Pmic (SdevMariko) || 0x3F000003 || 1:45 || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 16 || 0x3F000402 || 1:46 || N || 400000 || 3 || 5000000 || Power Monitor | + | | 16 || Ina226VsysAp || 0x3F000402 || 1:46 || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 17 || 0x3F000403 || 1:47 || N || 400000 || 3 || 5000000 || Power Monitor | + | | 17 || Ina226VsysBlDs || 0x3F000403 || 1:47 || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 18 || 0x35000047 || 1:29 || N || 400000 || 3 || 5000000 || Ambient Light Sensor | + | | 18 || Bh1730 || 0x35000047 || 1:29 || N || 400000 || 3 || 5000000 || Ambient Light Sensor || [[Backlight services]] || Icosa, Hoag, Iowa, Unknown |
|- | |- | ||
− | | 19 || 0x3F000404 || 1:48 || N || 400000 || 3 || 5000000 || Power Monitor | + | | 19 || Ina226VsysCore or Ina226VddCoreAp (SdevMariko) || 0x3F000404 || 1:48 || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 20 || 0x3F000405 || 1:49 || N || 400000 || 3 || 5000000 || Power Monitor | + | | 20 || Ina226Soc1V8 or Ina226VddSoc1V8 (SdevMariko) || 0x3F000405 || 1:49 || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 21 || 0x3F000406 || 1:4A || N || 400000 || 3 || 5000000 || Power Monitor | + | | 21 || Ina226Lpddr1V8 or Ina226Vdd1V8 (SdevMariko) || 0x3F000406 || 1:4A || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 22 || 0x3F000407 || 1:4B || N || 400000 || 3 || 5000000 || Power Monitor | + | | 22 || Ina226Reg1V32 || 0x3F000407 || 1:4B || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | 23 || 0x3F000408 || 1:4D || N || 400000 || 3 || 5000000 || Power Monitor | + | | 23 || Ina226Vdd3V3Sys || 0x3F000408 || 1:4D || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | [2.0.0+] 24 || 0x34000001 || 3:50 || N || 100000 || 0 || 0 || HDMI DDC || [[NV services]] || Copper, Calcio | + | | [2.0.0+] 24 || || 0x34000001 || 3:50 || N || 100000 || 0 || 0 || HDMI DDC || [[NV services]] || Copper, Calcio |
|- | |- | ||
− | | [2.0.0+] 25 || 0x34000002 || 3:54 || N || 100000 || 0 || 0 || HDMI SCDC || [[NV services]] || Copper, Calcio | + | | [2.0.0+] 25 || || 0x34000002 || 3:54 || N || 100000 || 0 || 0 || HDMI SCDC || [[NV services]] || Copper, Calcio |
|- | |- | ||
− | | [2.0.0+] 26 || 0x34000003 || 3:3A || N || 100000 || 0 || 0 || HDMI HDCP || [[NV services]] || Copper, Calcio | + | | [2.0.0+] 26 || || 0x34000003 || 3:3A || N || 100000 || 0 || 0 || HDMI HDCP || [[NV services]] || Copper, Calcio |
|- | |- | ||
− | | [4.0.0+] 27 || 0x3A000005 || 4:52 ([4.0.0-8.0.0] 4:A4) || N || 400000 || 0 || 0 || Buck Regulator | + | | [4.0.0+] 27 || Fan53528 || 0x3A000005 || 4:52 ([4.0.0-8.0.0] 4:A4) || N || 400000 || 0 || 0 || Buck Regulator || || Hoag, Iowa, Calcio, Unknown |
|- | |- | ||
− | | [4.0.0+] 28 || 0x3A000002 || 4:31 ([8.0.0-9.2.0] 4:33, [4.0.0-8.0.0] 4:31) || N || 400000 || 0 || 0 || PMIC | + | | [4.0.0+] 28 || Max77812Pmic || 0x3A000002 || 4:31 ([8.0.0-9.2.0] 4:33, [4.0.0-8.0.0] 4:31) || N || 400000 || 0 || 0 || PMIC || [[PCV services]] || Hoag, Iowa, Calcio, Unknown |
|- | |- | ||
− | | [4.0.0+] 29 || 0x3A000006 ([4.0.0-9.2.0] 0x3A000002) || 4:33 ([4.0.0-8.0.0] 4:31) || N || 400000 || 0 || 0 || PMIC | + | | [4.0.0+] 29 || Max77812Pmic || 0x3A000006 ([4.0.0-9.2.0] 0x3A000002) || 4:33 ([4.0.0-8.0.0] 4:31) || N || 400000 || 0 || 0 || PMIC || [[PCV services]] || Hoag, Iowa, Calcio, Unknown |
|- | |- | ||
− | | [4.0.0+] 30 || 0x3F000409 || 1:4E || N || 400000 || 3 || 5000000 || Power Monitor | + | | [4.0.0+] 30 || Ina226VddDdr0V6 (SdevMariko) || 0x3F000409 || 1:4E || N || 400000 || 3 || 5000000 || Power Monitor || nvdbgsvc || Factory |
|- | |- | ||
− | | [8.0.0+] 31 || 0x36000001 || 1:08 || N || 400000 || 3 || 5000000 || NFC IC || [[NFC services]] || Hoag | + | | [8.0.0+] 31 || || 0x36000001 || 1:08 || N || 400000 || 3 || 5000000 || NFC IC || [[NFC services]] || Hoag |
|} | |} | ||
Revision as of 16:47, 19 August 2020
gpio
This is "nn::gpio::IManager".
Cmd | Name |
---|---|
0 | #OpenSessionForDev |
1 | #OpenSession |
2 | #OpenSessionForTest |
3 | [1.0.0-6.2.0] #IsWakeEventActive |
4 | [1.0.0-6.2.0] GetWakeEventActiveFlagSet |
5 | [1.0.0-6.2.0] SetWakeEventActiveFlagSetForDebug |
6 | #SetWakePinDebugMode |
7 | [5.0.0+] #OpenSession2 |
8 | [5.0.0+] #IsWakeEventActive2 |
9 | [5.0.0+] SetWakeEventActiveFlagSetForDebug2 |
10 | [6.0.0+] #SetRetryValues |
OpenSessionForDev
Takes a raw #GpioPadDescriptor and returns an #IPadSession.
OpenSession
Same as #OpenSessionForDev except it takes a #GpioPadName which is then converted to a #GpioPadDescriptor. Returns an #IPadSession.
OpenSessionForTest
Same as #OpenSession but panics on failure.
IsWakeEventActive
Takes a #GpioPadName and returns a bool.
SetWakePinDebugMode
Takes an u32 WakePinDebugMode. No output.
OpenSession2
Same as #OpenSession but takes a DeviceCode and an u32.
IsWakeEventActive2
Same as #IsWakeEventActive but takes a DeviceCode.
SetRetryValues
Stubbed. Returns 0.
IPadSession
This is "nn::gpio::IPadSession".
Cmd | Name |
---|---|
0 | SetDirection |
1 | GetDirection |
2 | SetInterruptMode |
3 | GetInterruptMode |
4 | SetInterruptEnable |
5 | GetInterruptEnable |
6 | GetInterruptStatus |
7 | ClearInterruptStatus |
8 | SetValue |
9 | GetValue |
10 | BindInterrupt |
11 | UnbindInterrupt |
12 | SetDebounceEnabled |
13 | GetDebounceEnabled |
14 | SetDebounceTime |
15 | GetDebounceTime |
16 | [4.0.0+] SetValueForSleepState |
17 | [6.0.0+] GetValueForSleepState |
i2c, i2c:pcv
This is "nn::i2c::IManager".
Cmd | Name |
---|---|
0 | OpenSessionForDev |
1 | OpenSession |
2 | [1.0.0-5.1.0] HasDevice |
3 | [1.0.0-5.1.0] HasDeviceForDev |
4 | [6.0.0+] OpenSession2 |
OpenSessionForDev
Takes an u32 port, an u16 addr, an AddressingMode (1 for 10-bit, 0 otherwise) and a SpeedMode (400000 or 100000). Returns an #II2cSession.
OpenSession
Takes an #I2cDevice and returns an #II2cSession.
HasDevice
Takes an #I2cDevice and returns true if the device exists or false otherwise.
HasDeviceForDev
Takes an u32 port, an u16 addr, an AddressingMode (1 for 10-bit, 0 otherwise) and a SpeedMode (400000 or 100000). Returns true if the device exists or false otherwise.
OpenSession2
Same as OpenSession but takes a DeviceCode.
II2cSession
This is "nn::i2c::ISession".
Cmd | Name |
---|---|
0 | [1.0.0-5.1.0] Send |
1 | [1.0.0-5.1.0] Receive |
2 | [1.0.0-5.1.0] ExecuteCommandList |
10 | #SendAuto |
11 | ReceiveAuto |
12 | #ExecuteCommandListAuto |
13 | [6.0.0+] #SetRetryValues |
SendAuto
Takes bytes to write in either a static buffer or a receive buffer, returns an error code for success.
ExecuteCommandListAuto
Takes a command list from either a static buffer or a receive buffer, returns data in either a static (or recieve?) buffer.
Commands
- 0x40 [u8 len] <bytes> - Write bytes to device
- 0xC1 [u8 len] - Receive bytes from device
SetRetryValues
Takes 2 u32s MaxRetries and RetryDelay. Returns 0.
uart
This is "nn::uart::IManager".
Cmd | Name |
---|---|
0 | #HasPort |
1 | #HasPortForDev |
2 | #IsSupportedBaudRate |
3 | #IsSupportedBaudRateForDev |
4 | #IsSupportedFlowControlMode |
5 | #IsSupportedFlowControlModeForDev |
6 | #CreatePortSession |
7 | #IsSupportedPortEvent |
8 | #IsSupportedPortEventForDev |
9 | [7.0.0+] #IsSupportedDevice |
10 | [7.0.0+] #IsSupportedDeviceForDev |
HasPort
Takes an #UartPort. Returns a boolean success value.
HasPortForDev
Takes an #UartPortForDev. Returns a boolean success value.
IsSupportedBaudRate
Takes an #UartPort and an u32 BaudRate. Returns a boolean success value.
Supported baud rates are 57600, 115200, 1000000 and 3000000.
IsSupportedBaudRateForDev
Takes an #UartPortForDev and an u32 BaudRate. Returns a boolean success value.
Supported baud rates are 57600, 115200, 1000000 and 3000000.
IsSupportedFlowControlMode
Takes an #UartPort and an u32 FlowControlMode. Returns a boolean success value.
Supported modes are 0 (RTS) and 1 (CTS).
IsSupportedFlowControlModeForDev
Takes an #UartPortForDev and an u32 FlowControlMode. Returns a boolean success value.
Supported modes are 0 (RTS) and 1 (CTS).
CreatePortSession
No input. Returns an #IPortSession.
IsSupportedPortEvent
Takes an #UartPort and an u32 PortEvent. Returns a boolean success value.
Supported events are 0 (data), 1 (break), 2 (unknown) and 3 (unknown).
IsSupportedPortEventForDev
Takes an #UartPortForDev and an u32 PortEvent. Returns a boolean success value.
Supported events are 0 (data), 1 (break), 2 (unknown) and 3 (unknown).
IsSupportedDevice
Takes an #UartPort and an u32 Device. Returns a boolean success value.
Supported devices are 0 (Bluetooth) for UART-D, 0 (Joy-Con(R)) for UART-B, 0 (Joy-Con(L)) and 1 (MCU) for UART-C.
IsSupportedDeviceForDev
Takes an #UartPortForDev and an u32 Device. Returns a boolean success value.
Supported devices are 0 (Bluetooth) for UART-D, 0 (Joy-Con(R)) for UART-B, 0 (Joy-Con(L)) and 1 (MCU) for UART-C.
IPortSession
This is "nn::uart::IPortSession".
Cmd | Name |
---|---|
0 | #OpenPort |
1 | #OpenPortForDev |
2 | GetWritableLength |
3 | Send |
4 | GetReadableLength |
5 | Receive |
6 | BindPortEvent |
7 | UnbindPortEvent |
OpenPort
Takes an #UartPort, 3 u32s, 2 copy handles and 4 u8s (each padded to u32). Returns a boolean success value.
[7.0.0+] Now takes an additional u64.
OpenPortForDev
Takes an #UartPortForDev, 3 u32s, 2 copy handles and 4 u8s (each padded to u32). Returns a boolean success value.
[7.0.0+] Now takes an additional u64.
pwm
This is "nn::pwm::IManager".
Cmd | Name |
---|---|
0 | OpenSessionForDev |
1 | OpenSession |
2 | [6.0.0+] OpenSession2 |
OpenSession2
Takes a DeviceCode and returns an #IChannelSession.
IChannelSession
This is "nn::pwm::IChannelSession".
Cmd | Name |
---|---|
0 | SetPeriod |
1 | GetPeriod |
2 | SetDuty |
3 | GetDuty |
4 | SetEnabled |
5 | GetEnabled |
6 | [6.0.0+] SetScale |
7 | [6.0.0+] GetScale |
pinmux
This is "nn::pinmux::IManager".
Cmd | Name |
---|---|
0 | OpenSession |
OpenSession
Takes an #AssignablePinGroupName or an #AssignablePinGroupNameForHardwareTest and returns an ISession.
ISession
This is "nn::pinmux::ISession".
Cmd | Name |
---|---|
0 | #SetPinAssignment |
1 | #GetPinAssignment |
2 | #SetPinAssignmentForHardwareTest |
SetPinAssignment
Takes an u32 PinAssignment. No output.
GetPinAssignment
No input. Returns an u32 PinAssignment.
SetPinAssignmentForHardwareTest
Takes an u32 PinAssignmentForHardwareTest. No output.
sasbus
This is "nn::sasbus::IManager".
This was added with [3.0.0+].
Cmd | Name |
---|---|
0 | OpenSession |
OpenSession
Takes a #SasbusPort and returns an ISession.
ISession
This is "nn::sasbus::ISession".
Cmd | Name |
---|---|
0 | #Write |
1 | #Read |
2 | #StartPeriodicReceiveMode |
3 | #StopPeriodicReceiveMode |
Write
Takes a type-0x21 input buffer and an u8 SpiCommand. No output.
Read
Takes a type-0x22 output buffer and an u8 SpiCommand. No output.
StartPeriodicReceiveMode
Takes an u8 SpiCommand (padded to u32), an u32, two u64s and a copy handle. No output.
StopPeriodicReceiveMode
No input/output.
led
This is "nn::led::detail::IManager".
This was added with [8.1.1+].
Cmd | Name |
---|---|
0 | #OpenController |
OpenController
Takes a DeviceCode (which must be 0x35000065) and returns an #IController session for it.
IController
This is "nn::led::detail::IController".
This was added with [8.1.1+].
Cmd | Name |
---|---|
0 | |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | |
8 | |
9 | |
10 | |
11 | |
12 | |
13 | |
14 | |
15 | |
16 | |
17 | |
18 | |
19 | |
20 | |
21 | [8.1.1-9.2.0] |
GpioPadName
This is "nn::gpio::GpioPadName".
Value | Name | GpioPadDescriptor | DeviceCode | Tegra (port, pin) | Description | Direction | Used by (services) | Used by (hardware) |
---|---|---|---|---|---|---|---|---|
0x01 | CodecLdoEnTemp | 0xCC | 0x33000002 | Z, 4 | Audio Codec (ALC5639) Power | Out | Audio services, Fatal services | Icosa, Hoag, Iowa, Unknown |
0x02 | PowSdEn | 0x24 | 0x3C000001 | E, 4 | SDCard Power | Out | PCV services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
0x03 | BtRst | 0x3C | 0x37000002 | H, 4 | Bluetooth Reset | Out | Bluetooth Driver services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
0x04 | RamCode3 | 0xDA | 0xC9000402 | BB, 2 | Secondary Boot Device Configration | In | Icosa, Iowa | |
0x05 | GameCardReset | 0xDB | 0x3C000402 | BB, 3 | Gamecard Reset | Out | Filesystem services | Icosa, Copper, Hoag, Iowa, Unknown |
0x06 | CodecAlert | 0xDC | 0x33000003 | BB, 4 | Audio Codec (ALC5639) Alert | In | Audio services | Icosa, Hoag, Iowa, Unknown |
0x07 | PowGc | 0x25 | 0x3C000401 | E, 5 | Gamecard Power | Out | Icosa, Copper | |
0x08 | DebugControllerDet | 0x90 | 0x350000CA | S, 0 | Debug Pad Detect | In | HID services | Icosa, Iowa |
0x09 | BattChgStatus | 0x91 | 0x39000407 | S, 1 | Battery Charge Status | In | Icosa, Hoag, Iowa, Unknown | |
0x0A | BattChgEnableN | 0x96 | 0x39000003 | S, 6 | Charger IC (BQ24193) Charge Enable | Out | PTM services | Icosa, Hoag, Iowa, Unknown |
0x0B | FanTach | 0x97 | 0x3D000002 | S, 7 | Fan Tachometer | In | Icosa, Hoag, Iowa, Calcio, Unknown | |
0x0C | ExtconDetS | 0x26 | 0x3500040B | E, 6 | Joy-Con(L) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert) | In | HID services, AM services | Icosa, Iowa, Unknown |
0x0D | Vdd50AEn | 0x05 | 0x39000401 | A, 5 | Fan and Joy-Con Rails Power (Battery - BQ24193 5V) | Out | PTM services | Icosa, Hoag, Iowa, Unknown |
0x0E | SdevCoaxSel1 | 0x78 | 0xCA000402 | P, 0 | SDEV Coax Select | In | Icosa, Iowa | |
0x0F | GameCardCd | 0x93 | 0x3C000403 | S, 3 | Gamecard Card Detect | In | Filesystem services, AM services | Icosa, Copper, Hoag, Iowa, Unknown |
0x10 | ProdType0 | 0x7D | 0xC900040B | P, 5 | In | Icosa, Copper, Iowa | ||
0x11 | ProdType1 | 0x7C | 0xC900040C | P, 4 | In | Icosa, Copper, Iowa | ||
0x12 | ProdType2 | 0x7B | 0xC900040D | P, 3 | In | Icosa, Copper, Iowa | ||
0x13 | ProdType3 | 0x7A | 0xC900040E | P, 2 | In | Icosa, Copper, Iowa | ||
0x14 | TempAlert | 0xBC | 0x3E000002 | X, 4 | Temperature Sensor | In | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | |
0x15 | CodecHpDetIrq | 0xAE | 0x33000004 | V, 6 | Audio Codec (ALC5639) Headphone Detect | In | Audio services | Icosa, Hoag, Iowa, Unknown |
0x16 | MotionInt | 0xBA | 0x35000041 | X, 2 | In | Icosa, Hoag, Iowa, Unknown | ||
0x17 | TpIrq | 0xB9 | 0x35000036 | X, 1 | TouchPanel IRQ | In | HID services | Icosa, Hoag, Iowa, Unknown |
0x18 | ButtonSleep2 | 0xBD | 0x35000001 | X, 5 | Power Button | In | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | |
0x19 | ButtonVolUp | 0xBE | 0x35000002 | X, 6 | Volume Up | In | Boot2, Audio services, Fatal services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
0x1A | ButtonVolDn | 0xBF | 0x35000003 | X, 7 | Volume Down | In | Boot2, Audio services | Icosa, Copper, Hoag, Iowa, Calcio , Unknown |
0x1B | BattMgicIrq | 0xC0 | 0x39000034 | Y, 0 | Fuel Gauge IC (MAX17050) IRQ | In | PTM services, AM services | Icosa, Hoag, Iowa, Unknown |
0x1C | RecoveryKey | 0xC1 | 0x35000004 | Y, 1 | Recovery Mode Key | In | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | |
0x1D | PowLcdBlEn | 0xA9 | 0x3400003E | V, 1 | Backlight Enable | Out | NV services, Backlight services | Icosa, Hoag, Iowa |
0x1E | LcdReset | 0xAA | 0x34000033 | V, 2 | Backlight Reset | Out | NV services | Icosa, Hoag, Iowa, Unknown |
0x1F | PdVconnEn | 0x55 | 0x040000CC | K, 5 | USB-PD Controller (RHOM BM92T30MWV) VCONN Power | Out | PTM services, USB services | Icosa, Hoag, Iowa, Unknown |
0x20 | PdRstN | 0xAD | 0x040000CA | V, 5 | USB-PD Controller (RHOM BM92T30MWV) Reset | Out | USB services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
0x21 | Bq24190Irq | 0xC8 | 0x39000002 | Z, 0 | Charger IC (BQ24193) IRQ | In | PTM services, AM services | Icosa, Hoag, Iowa, Unknown |
0x22 | SdevCoaxSel0 | 0xCA | 0xCA000401 | Z, 2 | SDEV Coax Select | In | Icosa, Iowa | |
0x23 | SdWp | 0xCB | 0x3C000003 | Z, 3 | SDCard Write Protect | In | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | |
0x24 | TpReset | 0x4F | 0x35000035 | J, 7 | TouchPanel Reset | Out | HID services | Icosa, Hoag, Iowa, Unknown |
0x25 | BtGpio2 | 0x50 | 0x37000401 | K, 0 | In | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | ||
0x26 | BtGpio3 | 0x51 | 0x37000402 | K, 1 | In | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | ||
0x27 | BtGpio4 | 0x52 | 0x37000403 | K, 2 | In | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | ||
0x28 | CradleIrq | 0x54 | 0x040000CB | K, 4 | USB-PD Controller (RHOM BM92T30MWV) IRQ | In | USB services, AM services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
0x29 | PowVcpuInt | 0x56 | 0x3E000003 | K, 6 | In | Icosa, Copper, Unknown | ||
0x2A | Max77621GpuInt | 0x57 | 0x3E000004 | K, 7 | In | Icosa, Copper | ||
0x2B | ExtconChgU | 0x53 | 0x35000402 | K, 3 | Joy-Con(R) Charge | Out | HID services | Icosa, Iowa, Unknown |
0x2C | ExtconChgS | 0xE3 | 0x3500040C | CC, 3 | Joy-Con(L) Charge | Out | HID services | Icosa, Iowa, Unknown |
0x2D | WifiRfDisable | 0x38 | 0x38000003 | H, 0 | Out | Icosa, Copper, Hoag, Iowa, Calcio | ||
0x2E | WifiReset | 0x39 | 0x38000002 | H, 1 | WiFi Reset | Out | WLAN services, PCIe services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
0x2F | ApWakeBt | 0x3B | 0x37000003 | H, 3 | Out | Bluetooth Driver services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | |
0x30 | BtWakeAp | 0x3D | 0x37000004 | H, 5 | In | AM services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | |
0x31 | BtGpio5 | 0x3F | 0x37000404 | H, 7 | Out | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | ||
0x32 | PowLcdVddPEn | 0x40 | 0x34000034 | I, 0 | Backlight +5V | Out | NV services | Icosa, Hoag, Iowa |
0x33 | PowLcdVddNEn | 0x41 | 0x34000035 | I, 1 | Backlight -5V | Out | NV services | Icosa, Hoag, Iowa |
0x34 | ExtconDetU | 0x3E | 0x35000401 | H, 6 | Joy-Con(R) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert) | In | HID services, AM services | Icosa, Iowa, Unknown |
0x35 | RamCode2 | 0xE2 | 0xC9000401 | CC, 2 | Secondary Boot Device Configration | In | Icosa, Iowa | |
0x36 | Vdd50BEn | 0xE4 | 0x39000402 | CC, 4 | Fan and Joy-Con Rails Power (USB 5V) | Out | PTM services | Icosa, Iowa |
0x37 | WifiWakeHost | 0x3A | 0x38000004 | H, 2 | In | AM services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown | |
0x38 | SdCd | 0xC9 | 0x3C000002 | Z, 1 | SDCard Card Detect | In | Filesystem services, AM services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
0x39 | OtgFet1ForSdev | 0x4D | 0x39000404 | J, 5 | Charger IC (BQ24193) OTG Charge Select | Out | PTM services, USB services | Icosa, Iowa |
0x3A | OtgFet2ForSdev | 0x58 | 0x39000405 | L, 0 | Charger IC (BQ24193) OTG Charge Select | Out | PTM services, USB services | Icosa, Iowa |
0x3B | ExtConWakeU | 0x3E | 0x35000403 | H, 6 | Joy-Con(R) Wake Detect | In | Icosa, Hoag, Iowa, Unknown | |
0x3C | ExtConWakeS | 0x26 | 0x3500040D | E, 6 | Joy-Con(L) Wake Detect | In | Icosa, Hoag, Iowa, Unknown | |
0x3D | PmuIrq | -1 | 0x39000406 | |||||
0x3E | ExtUart2Cts | 0x33 | 0x35000404 | G, 3 | Joy-Con(R) CTS (checked low) | In | HID services, AM services | |
0x3F | ExtUart3Cts | 0x1C | 0x3500040E | D, 4 | Joy-Con(L) CTS (checked low) | In | HID services, AM services | |
0x40 | 5VStepDownEn | 0xD9 | 0x39000408 | BB, 1 | 5V Step-Down Regulator Power | Out | Copper | |
0x41 | UsbSwitchB2Oc | 0x0C | 0x04000401 | B, 4 | USB Root Port 2 Over Current | In | USB services | Copper |
0x42 | 5VStepDownPg | 0x0D | 0x39000409 | B, 5 | 5V Step-Down Regulator Power Good Flag | In | Copper | |
0x43 | UsbSwitchAEn | 0x21 | 0x04000402 | E, 1 | USB Power | Out | USB services | Copper |
0x44 | UsbSwitchAFlag | 0x27 | 0x04000403 | E, 7 | USB Power Flag | In | USB services | Copper |
0x45 | UsbSwitchB3Oc | 0x92 | 0x04000404 | S, 2 | USB Root Port 3 Over Current | In | USB services | Copper |
0x46 | UsbSwitchB3En | 0x95 | 0x04000405 | S, 5 | USB Root Port 3 Power | Out | USB services | Copper |
0x47 | UsbSwitchB2En | 0x98 | 0x04000406 | T, 0 | USB Root Port 2 Power | Out | USB services | Copper |
0x48 | Hdmi5VEn | 0x10 | 0x34000004 | C, 0 | HDMI 5V | Out | NV services | Copper, Calcio |
0x49 | UsbSwitchB1En | 0x11 | 0x04000407 | C, 1 | USB Root Port 1 Power | Out | USB services | Copper, Calcio |
0x4A | HdmiPdTrEn | 0x12 | 0x34000005 | C, 2 | HDMI/Power Delivery Switch | Out | NV services | Copper, Calcio |
0x4B | FanEn | 0x42 | 0x3D000003 | I, 2 | Fan Enable | Out | PTM services | Copper |
0x4C | UsbSwitchB1Oc | 0xE6 | 0x04000408 | CC, 6 | USB Root Port 1 Over Current | In | USB services | Copper, Calcio |
[2.0.0+] 0x4D | PwmFan | 0xAC | 0x3D000001 | V, 4 | Pulse-Width Modulation Fan Control | Out | PTM services | Copper |
[2.0.0+] 0x4E | HdmiHpd | 0xE1 | 0x34000006 | CC, 1 | HDMI Hot Plug Detect | In | NV services | Copper, Calcio |
[5.0.0+] 0x4F | Max77812Irq | 0x56 | 0x3E000003 | K, 6 | In | Hoag, Iowa, Calcio | ||
[6.0.0+] 0x50 | 0x20 | 0xCA000001 | E, 0 | Out | Hoag, Calcio, Unknown | |||
[6.0.0+] 0x51 | 0x21 | 0xCA000002 | E, 1 | Out | Hoag, Calcio, Unknown | |||
[6.0.0+] 0x52 | 0x22 | 0xCA000003 | E, 2 | Out | Hoag, Calcio, Unknown | |||
[6.0.0+] 0x53 | 0x23 | 0xCA000004 | E, 3 | Out | Hoag, Calcio, Unknown | |||
[6.0.0+] 0x54 | NfcIrq | 0x4C | 0x36000004 | J, 4 | In | NFC services | Hoag | |
[6.0.0+] 0x55 | NfcRst | 0x57 | 0x36000003 | K, 7 | Out | NFC services | Hoag | |
[6.0.0+] 0x56 | McuIrq | 0x27 ([6.0.0-8.0.0] 0x94) | 0x35000415 | S, 4 | In | Hoag | ||
[6.0.0+] 0x57 | McuBoot | 0x98 | 0x35000416 | T, 0 | Out | HID services | Hoag | |
[6.0.0+] 0x58 | McuRst | 0x99 | 0x35000417 | T, 1 | Out | HID services | Hoag | |
[6.0.0+] 0x59 | Vdd5V3En | 0xBB | 0x39000403 | X, 3 | 5V3 Fan Power | Out | PTM services | Hoag, Iowa, Unknown |
[6.0.0+] 0x5A | McuPor | 0xE5 | 0x35000418 | CC, 5 | Out | HID services | Hoag | |
[6.0.0+] 0x5B | 0xAB | 0x35000005 | V, 3 | SioH Input | In | HID services, AM services | Hoag | |
[6.0.0+] 0x5C | NfcEn | 0x4E | 0x36000002 | J, 6 | Out | NFC services | Hoag | |
[7.0.0+] - | ExtUart2Rts | 0x32 | 0x35000406 | G, 2 | Joy-Con(R) RTS | In | ||
[7.0.0+] - | ExtUart3Rts | 0x1B | 0x35000410 | D, 3 | Joy-Con(L) RTS | In | ||
[7.0.0+] - | 0x17 | 0x3500041B | C, 7 | In | Hoag | |||
[7.0.0+] - | 0x18 | 0x3500041C | D, 0 | In | Hoag | |||
[7.0.0+] - | 0x15 | 0x3500041D | C, 5 | In | Hoag | |||
[7.0.0+] - | 0x16 | 0x3500041E | C, 6 | In | Hoag | |||
[10.0.0+] - | 0xC5 | 0x35000065 | Y, 5 | Out | Hoag | |||
[10.0.0+] - | 0x29 | 0x04000409 | F, 1 | Out | Calcio | |||
[10.0.0+] - | 0x38 | 0x34000401 | H, 0 | In | Unknown |
GpioPadDescriptor
Bits | Description |
---|---|
7-5 | Controller index |
4-3 | Port index |
2-0 | Pin number |
I2cDevice
This is "nn::i2c::I2cDevice".
Value | Name | DeviceCode | Port:Addr | Is10bit | Speed | Max Retries | Retry Delay | Description | Used by (services) | Used by (hardware) |
---|---|---|---|---|---|---|---|---|---|---|
0 | ClassicController | 0x350000C9 | 0:52 | N | 100000 | 0 | 0 | DebugPad Driver | HID services | Icosa, Iowa, Unknown |
1 | Ftm3bd56 | 0x35000033 | 2:49 | N | 400000 | 0 | 0 | TouchPanel | HID services | Icosa, Hoag, Iowa, Unknown |
2 | Tmp451 | 0x3E000001 | 0:4C | N | 100000 | 0 | 0 | Temperature Sensor | PTM services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
3 | Nct72 | 0x3E000001 | 0:4C | N | 100000 | 0 | 0 | Temperature Sensor | PTM services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
4 | Alc5639 | 0x33000001 | 0:1C | N | 100000 | 0 | 0 | Audio Codec | Audio services, Fatal services | Icosa, Hoag, Iowa, Unknown |
5 | Max77620Rtc | 0x3B000001 | 4:68 | N | 400000 | 3 | 5000000 | PMIC RTC | PCV services | Icosa, Copper |
6 | Max77620Pmic | 0x3A000001 | 4:3C | N | 400000 | 3 | 5000000 | PMIC | PCV services | Icosa, Copper |
7 | Max77621Cpu | 0x3A000003 | 4:1B | N | 400000 | 3 | 5000000 | Sub-PMIC for CPU | PCV services | Icosa, Copper |
8 | Max77621Gpu | 0x3A000004 | 4:1C | N | 400000 | 3 | 5000000 | Sub-PMIC for GPU | PCV services | Icosa, Copper |
9 | Bq24193 | 0x39000001 | 0:6B | N | 100000 | 3 | 5000000 | Charger IC | PTM services | Icosa, Hoag, Iowa, Unknown |
10 | Max17050 | 0x39000033 | 0:36 | N | 100000 | 3 | 5000000 | Fuel Gauge IC | PTM services, PCV services | Icosa, Hoag, Iowa, Unknown |
11 | Bm92t30mwv | 0x040000C9 | 0:18 | N | 100000 | 3 | 5000000 | USB-PD controller | USB services | Icosa, Copper, Hoag, Iowa, Calcio, Unknown |
12 | Ina226Vdd15v0Hb | 0x3F000401 | 1:40 | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
13 | Ina226VsysCpuDs or Ina226VddCpuAp (SdevMariko) | 0x3F000001 | 1:41 | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
14 | Ina226VsysGpuDs or Ina226VddGpuAp (SdevMariko) | 0x3F000002 | 1:44 | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
15 | Ina226VsysDdrDs or Ina226VddDdr1V1Pmic (SdevMariko) | 0x3F000003 | 1:45 | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
16 | Ina226VsysAp | 0x3F000402 | 1:46 | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
17 | Ina226VsysBlDs | 0x3F000403 | 1:47 | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
18 | Bh1730 | 0x35000047 | 1:29 | N | 400000 | 3 | 5000000 | Ambient Light Sensor | Backlight services | Icosa, Hoag, Iowa, Unknown |
19 | Ina226VsysCore or Ina226VddCoreAp (SdevMariko) | 0x3F000404 | 1:48 | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
20 | Ina226Soc1V8 or Ina226VddSoc1V8 (SdevMariko) | 0x3F000405 | 1:49 | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
21 | Ina226Lpddr1V8 or Ina226Vdd1V8 (SdevMariko) | 0x3F000406 | 1:4A | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
22 | Ina226Reg1V32 | 0x3F000407 | 1:4B | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
23 | Ina226Vdd3V3Sys | 0x3F000408 | 1:4D | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
[2.0.0+] 24 | 0x34000001 | 3:50 | N | 100000 | 0 | 0 | HDMI DDC | NV services | Copper, Calcio | |
[2.0.0+] 25 | 0x34000002 | 3:54 | N | 100000 | 0 | 0 | HDMI SCDC | NV services | Copper, Calcio | |
[2.0.0+] 26 | 0x34000003 | 3:3A | N | 100000 | 0 | 0 | HDMI HDCP | NV services | Copper, Calcio | |
[4.0.0+] 27 | Fan53528 | 0x3A000005 | 4:52 ([4.0.0-8.0.0] 4:A4) | N | 400000 | 0 | 0 | Buck Regulator | Hoag, Iowa, Calcio, Unknown | |
[4.0.0+] 28 | Max77812Pmic | 0x3A000002 | 4:31 ([8.0.0-9.2.0] 4:33, [4.0.0-8.0.0] 4:31) | N | 400000 | 0 | 0 | PMIC | PCV services | Hoag, Iowa, Calcio, Unknown |
[4.0.0+] 29 | Max77812Pmic | 0x3A000006 ([4.0.0-9.2.0] 0x3A000002) | 4:33 ([4.0.0-8.0.0] 4:31) | N | 400000 | 0 | 0 | PMIC | PCV services | Hoag, Iowa, Calcio, Unknown |
[4.0.0+] 30 | Ina226VddDdr0V6 (SdevMariko) | 0x3F000409 | 1:4E | N | 400000 | 3 | 5000000 | Power Monitor | nvdbgsvc | Factory |
[8.0.0+] 31 | 0x36000001 | 1:08 | N | 400000 | 3 | 5000000 | NFC IC | NFC services | Hoag |
UartPort
Name | DeviceCode (internal) | DeviceCode (mapped) | Port | Usage |
---|---|---|---|---|
0 | 0x03000001 | UART-A | Invalid | |
1 | 0x03000004 | 0x37000001 | UART-D | Bluetooth |
2 | 0x03000002 | 0x35000405 | UART-B | Joy-Con(R) |
3 | 0x03000003 | 0x3500040F | UART-C | Joy-Con(L) |
4 | 0x03000003 | 0x35000419 | UART-C | MCU |
UartPortForDev
Name | DeviceCode (internal) | DeviceCode (mapped) | Port | Usage |
---|---|---|---|---|
0 | 0x03000001 | UART-A | Invalid | |
1 | 0x03000002 | 0x35000405 | UART-B | Joy-Con(R) |
2 | 0x03000003 | 0x3500040F | UART-C | Joy-Con(L) |
3 | 0x03000004 | 0x37000001 | UART-D | Bluetooth |
ChannelName
This is "nn::pwm::ChannelName".
Value | Name | DeviceCode | Interface | Used by |
---|---|---|---|---|
0 | Invalid | |||
1 | CpuFan | 0x3D000001 | PWM Channel 1 | PTM services |
2 | LcdBacklight | 0x3400003D | PWM Channel 0 | Backlight services, NV services |
3 | Led | 0x35000065 | PMC LED Soft Blink | Bus services |
AssignablePinGroupName
This is "nn::pinmux::AssignablePinGroupName".
Name | Usage |
---|---|
0 | GPIO(G, 0) and GPIO(G, 3) |
1 | GPIO(D, 1) and GPIO(D, 4) |
2 | Sdmmc1Clk or GPIO(M, 0), GPIO(M, 1), GPIO(M, 2), GPIO(M, 3), GPIO(M, 4) and GPIO(M, 5) |
3 | GPIO(V, 4) |
100 | Invalid |
AssignablePinGroupNameForHardwareTest
This is "nn::pinmux::AssignablePinGroupNameForHardwareTest".
Name | Usage |
---|---|
0 | Invalid |
1 | Invalid |
2 | Invalid |
3 | Invalid |
100 | Uart4Tx, Uart4Rx, Uart4Rts and Uart4Cts |
SasbusPort
Name | DeviceCode | Port | Usage |
---|---|---|---|
0 | 0x3500003D | SPI4 | Joy-Con |