4,628
edits
Changes
→fgm, fgm:0, fgm:1, fgm:2, fgm:3, fgm:4, fgm:5, fgm:6, fgm:7, fgm:9
|-
|-
| 20 || [18.0.0+]
| 20 || [18.0.0+]
|-
| 21 || [19.0.0+]
|-
| 22 || [19.0.0+]
|-
| 23 || [19.0.0+]
|}
|}
! Cmd || Name
! Cmd || Name
|-
|-
| 0 ||
| 0 || GetAlertEvent
|-
|-
| 1 ||
| 1 || SetAlertEnabled
|-
|-
| 2 ||
| 2 || GetAlertStatus
|-
|-
| 3 ||
| 3 || ClearAlertStatus
|-
|-
| 4 ||
| 4 ||
| 10 ||
| 10 ||
|-
|-
| 11 ||
| 11 || GetChargeType
|-
|-
| 12 ||
| 12 || SetChargeType
|-
|-
| 13 ||
| 13 || SetChargeCurrentLimitInMilliAmpere
|-
|-
| 14 ||
| 14 || GetChargeVoltageLimitInMilliVolt
|-
|-
| 15 ||
| 15 || SetChargeVoltageLimitInMilliVolt
|-
|-
| 16 ||
| 16 || SetChargeConfig
|-
|-
| 17 || GetHiZ
| 17 || GetHiZ
| 19 || GetAverageChargeCurrentInMilliAmpere
| 19 || GetAverageChargeCurrentInMilliAmpere
|-
|-
| 20 ||
| 20 || GetChargeCurrentInMilliAmpere
|-
|-
| 21 ||
| 21 ||
| 24 ||
| 24 ||
|-
|-
| 25 ||
| 25 || GetParameter
|-
|-
| 26 ||
| 26 || SetParameter
|-
|-
| 27 ||
| 27 ||
| 40 || GetAverageBatteryVoltageInMilliVolt
| 40 || GetAverageBatteryVoltageInMilliVolt
|-
|-
| 41 ||
| 41 || SetBatteryVoltageAlertMinInMilliVolt
|-
|-
| 42 ||
| 42 || SetBatteryVoltageAlertMaxInMilliVolt
|-
|-
| 43 ||
| 43 || GetWatchdogTimerEnabled
|-
|-
| 44 ||
| 44 || SetWatchdogTimerEnabled
|-
|-
| 45 ||
| 45 || SetWatchdogTimerPeriod
|-
|-
| 46 ||
| 46 || ResetWatchdogTimer
|-
|-
| 47 ||
| 47 ||
| 48 ||
| 48 ||
|-
|-
| 49 ||
| 49 || GetBatteryVoltageInMilliVolt
|-
|-
| 50 ||
| 50 || GetAverageVoltageTimeConstant
|-
|-
| 51 ||
| 51 || GetChargeCurrentLimitInMilliAmpere
|-
|-
| 52 ||
| 52 ||
| 53 ||
| 53 ||
|-
|-
| 54 ||
| 54 || GetVfOcvInMilliVolt
|-
|-
| 55 ||
| 55 ||
= fgm, fgm:0, fgm:1, fgm:2, fgm:3, fgm:4, fgm:5, fgm:6, fgm:7, fgm:9 =
= fgm, fgm:0, fgm:1, fgm:2, fgm:3, fgm:4, fgm:5, fgm:6, fgm:7, fgm:9 =
These are "nn::fgm::sf::ISession".
These are "nn::fgm::sf::ISession".
[19.0.0+] These are "nn::fgm::ISession".
Each service represents a different priority from 0 (Highest/Thermal) to 9 (Lowest). The "fgm" service represents priority 8 (Default).
Each service represents a different priority from 0 (Highest/Thermal) to 9 (Lowest). The "fgm" service represents priority 8 (Default).
== IRequest ==
== IRequest ==
This is "nn::fgm::sf::IRequest".
This is "nn::fgm::sf::IRequest".
[19.0.0+] This is "nn::fgm::IRequest".
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Offset || Size || Description
! Offset || Size || Description
|-
|-
| 0x00 || 0x4 || u32. Input (Sink) current limit in mA
| 0x00 || 0x4 || InputCurrentLimit (input/sink current limit in mA)
|-
| 0x04 || 0x4 || BoostModeCurrentLimit (output/source/vbus/OTG current limit in mA)
|-
| 0x08 || 0x4 || FastChargeCurrentLimit (battery charging current limit in mA)
|-
| 0x0C || 0x4 || ChargeVoltageLimit (battery charging voltage limit in mV)
|-
| 0x10 || 0x4 || [[#ChargerType_2|ChargerType]]
|-
| 0x14 || 0x1 || [[#HiZMode|HiZMode]]
|-
| 0x15 || 0x1 || [[#BatteryCharging|BatteryCharging]]
|-
|-
| 0x04 || 0x4 || u32. Output (Source/Vbus/OTG) current limit in mA
| 0x16 || 0x2 || Reserved
|-
|-
| 0x08 || 0x4 || u32. Battery charging current limit in mA
| 0x18 || 0x4 || [[#Vdd50State|Vdd50State]]
|-
|-
| 0x0C || 0x4 || u32. Battery charging voltage limit in mV
| 0x1C || 0x4 || TemperatureCelsius (battery temperature in milli C)
|-
|-
| 0x10 || 0x4 || enum, same as power-role? Always 1 except when OTG where it becomes 2
| 0x20 || 0x4 || BatteryChargePercentage (capacity now per cent-mille, i.e. 100% = 100000 pcm)
|-
|-
| 0x14 || 0x4 || Bit field (bit8: Enable Battery Charging)
| 0x24 || 0x4 || BatteryChargeMilliVoltage (voltage avg in mV)
|-
|-
| 0x18 || 0x4 || u32. Charging limits state based on battery temperature
| 0x28 || 0x4 || BatteryAgePercentage (battery age capacity full/capacity design per cent-mille, i.e. 100% = 100000 pcm)
|-
|-
| 0x1C || 0x4 || u32. Battery Temperature (milli C)
| 0x2C || 0x4 || [[USB_services#UsbPowerRole|UsbPowerRole]]
|-
|-
| 0x20 || 0x4 || u32. Capacity now per cent-mille (i.e. 100% = 100000 pcm)
| 0x30 || 0x4 || [[USB_services#UsbChargerType|UsbChargerType]]
|-
|-
| 0x24 || 0x4 || u32. Voltage avg in mV
| 0x34 || 0x4 || ChargerInputVoltageLimit (charger voltage limit in mV)
|-
|-
| 0x28 || 0x4 || u32. Battery age (capacity full / capacity design) per cent-mille (i.e. 100% = 100000 pcm)
| 0x38 || 0x4 || ChargerInputCurrentLimit (charger current limit in mA)
|-
|-
| 0x2C || 0x4 || enum. Power role (0: Unknown, 1: Sink, 2: Source)
| 0x3C || 0x1 || [[#FastBatteryCharging|FastBatteryCharging]]
|-
|-
| 0x30 || 0x4 || enum. [[#Charger]]
| 0x3D || 0x1 || [[#ControllerPowerSupply|ControllerPowerSupply]]
|-
| 0x3E || 0x1 || [[#OtgRequest|OtgRequest]]
|-
| 0x3F || 0x1 || Reserved
|-
| 0x40 || 0x14 || [17.0.0+]
|}
== ChargerType ==
{| class="wikitable" border="1"
|-
|-
| 0x34 || 0x4 || u32. Charger voltage limit in mV
! Value || Name
|-
|-
| 0x38 || 0x4 || u32. Charger current limit in mA
| 0 || ChargeDisable
|-
|-
| 0x3C || 0x4 || Bit field (bit0: potentially no hub, bit8: Joy-con charging, bit12: OTG)
| 1 || ChargeBattery
|-
|-
| 0x40 || 0x14 ||
| 2 || Otg
|}
|}
=== Charger ===
== HiZMode ==
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Value || Name
|-
|-
| 0 || Unknown
| 0 || Disable
|-
| 1 || Enable
|}
== BatteryCharging ==
{| class="wikitable" border="1"
|-
|-
| 1 || PD
! Value || Name
|-
|-
| 2 || Type-C 1.5A
| 0 || Disable
|-
|-
| 3 || Type-C 3.0A
| 1 || Enable
|}
== FastBatteryCharging ==
{| class="wikitable" border="1"
|-
|-
| 4 || DCP
! Value || Name
|-
|-
| 5 || CDP
| 0 || Disable
|-
|-
| 6 || SDP
| 1 || Enable
|}
== ControllerPowerSupply ==
{| class="wikitable" border="1"
|-
|-
| 7 || Apple 500mA
! Value || Name
|-
| 0 || Disable
|-
| 1 || Enable
|}
== OtgRequest ==
{| class="wikitable" border="1"
|-
! Value || Name
|-
|-
| 8 || Apple 1000mA
| 0 || Disable
|-
|-
| 9 || Apple 2000mA
| 1 || Enable
|}
|}