Difference between revisions of "WLAN services"

From Nintendo Switch Brew
Jump to navigation Jump to search
 
(56 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
= wlan:inf =
 
= wlan:inf =
 
This is "nn::wlan::detail::IInfraManager".
 
This is "nn::wlan::detail::IInfraManager".
 +
 +
This service no longer exists in [15.0.0+].
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 6: Line 8:
 
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || OpenMode
+
| 0 || [[#OpenMode|OpenMode]]
 
|-
 
|-
| 1 || CloseMode
+
| 1 || [[#CloseMode|CloseMode]]
 
|-
 
|-
| 2 || GetMacAddress
+
| 2 || [[#GetMacAddress|GetMacAddress]]
 
|-
 
|-
| 3 || StartScan
+
| 3 || [[#StartScan|StartScan]]
 
|-
 
|-
| 4 || StopScan
+
| 4 || [[#StopScan|StopScan]]
 
|-
 
|-
| 5 || Connect
+
| 5 || [[#Connect|Connect]]
 
|-
 
|-
| 6 || CancelConnect
+
| 6 || [[#CancelConnect|CancelConnect]]
 
|-
 
|-
| 7 || Disconnect
+
| 7 || [[#Disconnect|Disconnect]]
 
|-
 
|-
| 8 || GetConnectionEvent
+
| 8 || [[#GetSystemEvent|GetSystemEvent]]
 
|-
 
|-
| 9 || GetConnectionStatus
+
| 9 || [[#GetConnectionStatus|GetConnectionStatus]]
 
|-
 
|-
| 10 || GetState
+
| 10 || [[#GetState|GetState]]
 
|-
 
|-
| 11 || GetScanResult
+
| 11 || [[#GetScanResult|GetScanResult]]
 
|-
 
|-
| 12 || GetRssi
+
| 12 || [[#GetRssi|GetRssi]]
 
|-
 
|-
| 13 || ChangeRxAntenna
+
| 13 || [[#ChangeRxAntenna|ChangeRxAntenna]]
 
|-
 
|-
| 14 || GetFwVersion
+
| 14 || [[#GetFwVersion|GetFwVersion]]
 
|-
 
|-
| 15 || RequestSleep
+
| 15 || [[#RequestSleep|RequestSleep]]
 
|-
 
|-
| 16 || RequestWakeUp
+
| 16 || [[#RequestWakeUp|RequestWakeUp]]
 
|-
 
|-
| 17 || RequestIfUpDown
+
| 17 || [[#ConnectWithWps|ConnectWithWps]]
 
|-
 
|-
 
| 18 || [3.0.0+]
 
| 18 || [3.0.0+]
Line 62: Line 64:
 
| 27 || [4.0.0+]
 
| 27 || [4.0.0+]
 
|-
 
|-
| 28 || [5.0.0+]
+
| 28 || [5.0.0+] [[#InitializeWlan|InitializeWlan]]
 
|-
 
|-
| 29 || [7.0.0+]
+
| 29 || [7.0.0+] [[#FinalizeWlan|FinalizeWlan]]
 
|-
 
|-
| 30 || [8.0.0+]
+
| 30 || [8.0.0+] [[#SetWowlDelayedWakeTime|SetWowlDelayedWakeTime]]
 
|-
 
|-
 
| 31 || [11.0.0+]
 
| 31 || [11.0.0+]
Line 82: Line 84:
 
| 37 || [11.0.0+]
 
| 37 || [11.0.0+]
 
|-
 
|-
| 38 || [13.0.0+]
+
| 38 || [13.0.0+] [[#SetDfrts|SetDfrts]]
 
|}
 
|}
  
Line 90: Line 92:
  
 
[7.0.0+] Input/output for cmds 27/28 were swapped, perhaps these cmds were swapped?
 
[7.0.0+] Input/output for cmds 27/28 were swapped, perhaps these cmds were swapped?
 +
 +
== OpenMode ==
 +
No input/output.
 +
 +
Sends command message 0x99 to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== CloseMode ==
 +
No input/output.
 +
 +
Sends command message 0x9A to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== GetMacAddress ==
 +
No input. Returns an output [[#MacAddress]].
 +
 +
Sends command message 0x18 (GetMacAddress) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== StartScan ==
 +
Takes a type-0x15 input buffer buffer containing a [[#ScanRequest]]. No output.
 +
 +
[15.0.0+] Now takes a type-0x19 input buffer instead of a type-0x15 input buffer.
 +
 +
Sends command messages 0xA (SetWlanInterfaceUpDown) and 0x14 (ScanRequest) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== StopScan ==
 +
No input/output.
 +
 +
Sends command message 0x16 (CancelScan) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== Connect ==
 +
Takes an input [[#ConnectParam]]. No output.
 +
 +
Sends command messages 0xA (SetWlanInterfaceUpDown), 0x11 (SetBeaconLostTimeout) and 0x20 (JoinNetworkSta) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== CancelConnect ==
 +
No input/output.
 +
 +
Sends command message 0x23 (CancelJoinNetwork) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== Disconnect ==
 +
No input/output.
 +
 +
Sends command message 0x24 (DisconnectRequest) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== GetSystemEvent ==
 +
Takes an input u32 '''SystemEventType'''. Returns an output Event handle.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== GetConnectionStatus ==
 +
No input. Returns an output [[#ConnectionStatus]].
 +
 +
Sends command message 0x80 (GetState) to the state machine, to check current state. Then this copies data from state to output (unrelated to message 0x80).
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== GetState ==
 +
No input. Returns an output [[#State]].
 +
 +
Sends command message 0x80 (GetState) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== GetScanResult ==
 +
Takes a type-0x6 output buffer containing a [[#ScanResult]]. No output.
 +
 +
Sends command message 0x15 (BssInfoListGet) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== GetRssi ==
 +
No input. Returns an output u32 '''Rssi'''.
 +
 +
Sends command message 0x2E (GetRssi) to the state machine.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== ChangeRxAntenna ==
 +
Takes an input u32. No output.
 +
 +
Sends command message 0x30 (SetRxChain) to the state machine.
 +
 +
The input value must be 1-3.
 +
 +
The message handler calls two vfuncs. The first vfunc uses the input u32 directly to configure "rxchain". The second vfunc configures "btc_params" with data determined using the input value.
 +
 +
This is not used on retail.
 +
 +
== GetFwVersion ==
 +
Takes a type-0xA output buffer containing a [[#FwVersion]]. No output.
 +
 +
Sends command message 0x33 (GetFwVersion) to the state machine. The handler validates state, then gets the value for config "ver".
 +
 +
This is not used on retail.
 +
 +
== RequestSleep ==
 +
No input/output.
 +
 +
Sends command messages 0x24 (DisconnectRequest), 0x34 (RequestSleep), 0x3D and 0x3E to the state machine.
 +
 +
First message GetState is sent, if state is 0x3 it does the following:
 +
 +
* Sends message 0x3D. If successful and the output u8 is 0, this then does the following:
 +
** Uses GetState to check for state 0x2/0x3. On success message DisconnectRequest is sent. If state is invalid or the command message failed, this will Abort.
 +
** Uses GetState to check for state 0x1/0x2/0xA. On success message 0x9A with param=0 is sent. If state is invalid or the command message failed, this will Abort.
 +
 +
Then message RequestSleep is sent. If the Result is not 0x146B (including success), it returns the Result. Otherwise when the Result is that value, it does the following:
 +
 +
* Sends message 0x3E.
 +
** Uses GetState to check for state 0x2/0x3. On success message DisconnectRequest is sent. If state is invalid or the command message failed, this will Abort.
 +
** Uses GetState to check for state 0x1/0x2/0xA. On success message 0x9A with param=0 is sent. If state is invalid or the command message failed, this will Abort.
 +
** Then this cmpl impl func will return the Result from calling itself.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== RequestWakeUp ==
 +
No input/output.
 +
 +
Sends command messages 0x1 (InitalizeWlanDriver), 0x24 (DisconnectRequest), 0x35 (RequestWakeUp), 0x3E, 0x80 (GetState) and 0x81 (GetStateBeforeSleep) to the state machine.
 +
 +
First message GetState is sent, returning 0 if state is 0xC, or throwing error if it isn't 0xA. Then message RequestWakeUp is sent, if successful then message 0x3E is sent and 0 is returned.
 +
 +
If RequestWakeUp fails it will immediately return the Result, unless the Result is one of the following:
 +
* 0xE86B (normal non-wowl codepath was previously used during RequestSleep): Sends message InitalizeWlanDriver, returning a Result on failure. Then message GetStateBeforeSleep is sent. If the output state is 0x1, it returns 0. If not 0x2 or the second output field is non-zero, it will Abort. Uses GetState to verify the state is valid, returning the Result from that on failure. Otherwise this will return the Result from sending command request 0x99 with param=0.
 +
* 0xE66B: Sends message 0x3E. Uses GetState to verify the state is valid, when valid then message DisconnectRequest is sent. If state-validation/DisconnectRequest failed this will Abort, otherwise this then returns 0.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== ConnectWithWps ==
 +
Takes a type-0x9 input buffer containing a [[#WpsPin]] and two input u32s '''WpsMethod''' and '''BeaconLostTimeout'''. No output.
 +
 +
Sends command messages 0xA (SetWlanInterfaceUpDown), 0x11 (SetBeaconLostTimeout) and 0x21 (JoinNetworkStaWithWps) to the state machine.
 +
 +
This is not used on retail.
 +
 +
== Cmd18 ==
 +
No input, returns an output u32.
 +
 +
Sends command message 0x80 (GetState) to the state machine, to check current state. Sends command message 0x36 to the state machine to get a value from state, which is then passed to a vfunc call. That func checks bits in the input to determine what value to return, which is then written to the output u32.
 +
 +
This is not used on retail.
 +
 +
== Cmd19 ==
 +
Takes an input [[#MacAddress]], three input u16s '''SrcPort''', '''DstPort''' and '''Unk0''', and three input u32s '''SrcIp''', '''DstIp''' and '''Unk1'''. No output.
 +
 +
This copies the input data into state, and sets a flag in state. The input is written into state with the following structure: [[#MacAddress]], '''SrcIp''', '''DstIp''', '''SrcPort''', '''DstPort''', '''Unk1''', '''Unk0'''.
 +
 +
This data is used during RequestSleep if a state field is set for using it (the codepath using this will throw an error if this data was not set). This data is cleared afterwards unless sleep was successfully entered with wowl. This is also cleared during RequestWakeUp. This is used for configuring various config related to wowl/tcpka/etc (wake-on-WLAN/TCP keep-alive). Note that an error is thrown if "wowl_activate" isn't set but sysmodule-side doesn't do so - this seems to be set automatically at some point.
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== Cmd20 ==
 +
No input/output.
 +
 +
This clears the state set by [[#Cmd19]].
 +
 +
This is not used on retail.
 +
 +
== Cmd21 ==
 +
No input, returns an output u32.
 +
 +
Same as [[#Cmd18]] except the value from the request is returned directly, without calling the vfunc.
 +
 +
This is not used on retail.
 +
 +
== Cmd22 ==
 +
Takes an input u32, no output.
 +
 +
Same as [[#Cmd21]] except this uses message 0x37 with the input u32. This is handled by writing the u32 into a global field (default value is 0xBC), which is used during configuration for [[#Cmd19|"wowl"]].
 +
 +
This is not used on retail.
 +
 +
== Cmd23 ==
 +
Takes an input u32, no output.
 +
 +
Sends command message 0x38 to the state machine. This is handled by writing the input value into a global flags field. The default value is 0x3 (all flag bits set). These flag bits are checked during the RequestSleep code handling the state for [[#Cmd19]].
 +
 +
This is not used on retail.
 +
 +
== Cmd24 ==
 +
No input, returns a [[#WakeUpStats]] and a [[#SleepStats]].
 +
 +
Sends command message 0x39 to the state machine, with 0x20-bytes from the output being copied to the first output struct. Sends command message 0x3A to the state machine, with 0x38-bytes from the output being copied to the second output struct.
 +
 +
These requests get data from state.
 +
 +
This is not used on retail.
 +
 +
== Cmd25 ==
 +
Takes two input bools, no output.
 +
 +
When the first bool flag is set, sends command message 0x3B to the state machine. When the second bool flag is set, sends command message 0x3C to the state machine. Then 0 is returned.
 +
 +
Both requests are handled by clearing various data in state. The first request clears the first state struct returned by [[#Cmd24]], likewise with the second request and the second state struct from [[#Cmd24]].
 +
 +
This is not used on retail.
 +
 +
== Cmd26 ==
 +
No input/output.
 +
 +
This sends a request which sets a global flag.
 +
 +
This flag is eventually checked by code which runs via RequestSleep, and in one case with wlan:dtc cmd19 (also used by requests done by nnMain/RequestWakeUp).
 +
 +
This is not used on retail.
 +
 +
== Cmd27 ==
 +
Takes a type-0xA output buffer containing an array of 2-byte entries, returns an output u32 total_out.
 +
 +
This memcpys data from state into the output buffer, clamped to a maximum of 0x40 entries (nifm hard-codes the count to 0x26).
 +
 +
This is used by [[Network_Interface_services|nifm]].
 +
 +
== InitializeWlan ==
 +
No input/output.
 +
 +
Sends command message 0x1 (InitalizeWlanDriver) to the state machine.
 +
 +
This is not used on retail.
 +
 +
== FinalizeWlan ==
 +
No input/output.
 +
 +
Sends command message 0x2 (FinalizeWlanDriver) to the state machine.
 +
 +
This is not used on retail.
 +
 +
== SetWowlDelayedWakeTime ==
 +
Unofficial name.
 +
 +
Takes an input s32 '''WowlDelayedWakeTime'''. No output.
 +
 +
'''WowlDelayedWakeTime''' must be <=0xE10 (3600) and >= -1. This value is written into state (last field in the state struct also used by [[#Cmd19]], which [[#Cmd19]] doesn't write), then this returns 0.
 +
 +
The user-process code using this cmd also has the above bounds check.
 +
 +
This is used by wlan during RequestSleep from the same code using the state set by [[#Cmd19]].
 +
 +
This cmd is used by [[Network_Interface_services|nifm]] with a value from state, prior to using RequestSleep.
 +
 +
If wificore gets to the point of actually using this for TCP-keep-alive, then it does the following:
 +
* This is only used when the [[#Cmd19|TCP]] connection is RST.
 +
** '''WowlDelayedWakeTime''' is the time in seconds to schedule a timer which will wake the system. 0 will schedule it for immediately.
 +
** -1 will skip scheduling that timer, hence waking the system is disabled when RST is received.
 +
** The wificore also supports -3 for immediately waking the system from the frame-handler, however wlan-sysmodule doesn't allow that.
 +
* Frames where the TCP flags do not match ACK will immediately wake the system, + other wake cause(s).
 +
 +
== Cmd31 ==
 +
No input/output.
 +
 +
Stubbed, just returns an error.
 +
 +
This is not used on retail.
 +
 +
== Cmd32 ==
 +
No input/output.
 +
 +
Stubbed, just returns an error.
 +
 +
This is not used on retail.
 +
 +
== Cmd33 ==
 +
Takes an input [[#MacAddress]] and a type-0x5 input buffer, no output.
 +
 +
Stubbed, just returns an error.
 +
 +
This is not used on retail.
 +
 +
== Cmd34 ==
 +
Takes a type-0x6 output buffer and returns a total of 0x10-bytes.
 +
 +
Stubbed, just returns an error.
 +
 +
This is not used on retail.
 +
 +
== Cmd35 ==
 +
No input/output.
 +
 +
Stubbed, just returns an error.
 +
 +
This is not used on retail.
 +
 +
== Cmd36 ==
 +
Takes two input u64s, no output.
 +
 +
Stubbed, just returns an error.
 +
 +
This is not used on retail.
 +
 +
== Cmd37 ==
 +
Takes an input u32, no output.
 +
 +
Stubbed, just returns an error.
 +
 +
This is not used on retail.
 +
 +
== SetDfrts ==
 +
Unofficial name.
 +
 +
Takes an input u32 '''Mode'''. No output.
 +
 +
[15.0.0+] Now takes an input u8 instead of an input u32.
 +
 +
'''Mode''' must be 0 or 1.
 +
 +
Sends command message 0x32 to the state machine.
 +
 +
The state machine then handles this by issuing the WLC_SET_VAR ioctl for the "pm2_sleep_ret_ext" variable. '''Mode''' is used to select between 2 sets of hardcoded parameters as follows:
 +
  struct wl_pm2_sleep_ret_ext {
 +
    u8 logic;
 +
    u8 PAD;
 +
    u16 low_ms;
 +
    u16 high_ms;
 +
    u16 rx_pkts_threshold;
 +
    u16 tx_pkts_threshold;
 +
    u16 txrx_pkts_threshold;
 +
    u32 rx_bytes_threshold;
 +
    u32 tx_bytes_threshold;
 +
    u32 txrx_bytes_threshold;
 +
  };
 +
 
 +
  wl_pm2_sleep_ret_ext args = {0};
 +
 
 +
  if (mode == 0) {
 +
    args.logic = 2;
 +
    args.low_ms = 2000;
 +
    args.high_ms = 5000;
 +
    args.rx_pkts_threshold = 10;
 +
  } else if (mode == 1) {
 +
    args.logic = 2;
 +
    args.low_ms = 200;
 +
    args.high_ms = 800;
 +
    args.rx_pkts_threshold = 10;
 +
  }
 +
Afterwards, the WLC_SET_PM ioctl is issued with the argument value 2 (PM2).
 +
 +
This is used by [[Network_Interface_services|nifm]].
  
 
= wlan:lcl =
 
= wlan:lcl =
 
This is "nn::wlan::detail::ILocalManager".
 
This is "nn::wlan::detail::ILocalManager".
 +
 +
This service no longer exists in [15.0.0+].
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 98: Line 454:
 
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 ||  
+
| 0 || [9.0.0+] [[#OpenMode_2|OpenMode]] ([1.0.0-8.1.0] [[#OpenMasterMode|OpenMasterMode]])
 
|-
 
|-
| 1 ||  
+
| 1 || [9.0.0+] [[#CloseMode_2|CloseMode]] ([1.0.0-8.1.0] [[#CloseMasterMode|CloseMasterMode]])
 
|-
 
|-
| 2 ||  
+
| 2 || [9.0.0+] [[#GetMacAddress_2|GetMacAddress]] ([1.0.0-8.1.0] [[#OpenClientMode|OpenClientMode]])
 
|-
 
|-
| 3 ||  
+
| 3 || [9.0.0+] [[#CreateBss|CreateBss]] ([1.0.0-8.1.0] [[#CloseClientMode|CloseClientMode]])
 
|-
 
|-
| 4 ||  
+
| 4 || [9.0.0+] [[#DestroyBss|DestroyBss]] ([1.0.0-8.1.0] [[#OpenSpectatorMode|OpenSpectatorMode]])
 
|-
 
|-
| 5 ||  
+
| 5 || [9.0.0+] [[#StartScan_2|StartScan]] ([1.0.0-8.1.0] [[#CloseSpectatorMode|CloseSpectatorMode]])
 
|-
 
|-
| 6 || GetMacAddress
+
| 6 || [9.0.0+] [[#StopScan_2|StopScan]] ([1.0.0-8.1.0] [[#GetMacAddress_2|GetMacAddress]])
 
|-
 
|-
| 7 || CreateBss
+
| 7 || [9.0.0+] [[#Connect_2|Connect]] ([1.0.0-8.1.0] [[#CreateBss|CreateBss]])
 
|-
 
|-
| 8 || DestroyBss
+
| 8 || [9.0.0+] [[#CancelConnect_2|CancelConnect]] ([1.0.0-8.1.0] [[#DestroyBss|DestroyBss]])
 
|-
 
|-
| 9 || StartScan
+
| 9 || [9.0.0+] [[#Join|Join]] ([1.0.0-8.1.0] [[#StartScan_2|StartScan]])
 
|-
 
|-
| 10 || StopScan
+
| 10 || [9.0.0+] [[#CancelJoin|CancelJoin]] ([1.0.0-8.1.0] [[#StopScan_2|StopScan]])
 
|-
 
|-
| 11 || Connect
+
| 11 || [9.0.0+] [[#Disconnect_2|Disconnect]] ([1.0.0-8.1.0] [[#Connect_2|Connect]])
 
|-
 
|-
| 12 || CancelConnect
+
| 12 || [9.0.0+] [[#SetBeaconLostCount|SetBeaconLostCount]] ([1.0.0-8.1.0] [[#CancelConnect_2|CancelConnect]])
 
|-
 
|-
| 13 || Join
+
| 13 || [9.0.0+] [[#GetSystemEvent_2|GetSystemEvent]] ([1.0.0-8.1.0] [[#Join|Join]])
 
|-
 
|-
| 14 || CancelJoin
+
| 14 || [9.0.0+] [[#GetConnectionStatus_2|GetConnectionStatus]] ([1.0.0-8.1.0] [[#CancelJoin|CancelJoin]])
 
|-
 
|-
| 15 || Disconnect
+
| 15 || [9.0.0+] [[#GetClientStatus|GetClientStatus]] ([1.0.0-8.1.0] [[#Disconnect_2|Disconnect]])
 
|-
 
|-
| 16 || SetBeaconLostCount
+
| 16 || [9.0.0+] [[#GetBssIndicationEvent|GetBssIndicationEvent]] ([1.0.0-8.1.0] [[#SetBeaconLostCount|SetBeaconLostCount]])
 
|-
 
|-
| 17 ||  
+
| 17 || [9.0.0+] [[#GetBssIndicationInfo|GetBssIndicationInfo]] ([1.0.0-8.1.0] [[#GetSystemEvent_2|GetSystemEvent]])
 
|-
 
|-
| 18 ||  
+
| 18 || [9.0.0+] [[#GetState_2|GetState]] ([1.0.0-8.1.0] [[#GetConnectionStatus_2|GetConnectionStatus]])
 
|-
 
|-
| 19 ||  
+
| 19 || [9.0.0+] [[#GetAllowedChannels|GetAllowedChannels]] ([1.0.0-8.1.0] [[#GetClientStatus|GetClientStatus]])
 
|-
 
|-
| 20 || GetBssIndicationEvent
+
| 20 || [9.0.0+] [[#AddIe|AddIe]] ([1.0.0-8.1.0] [[#GetBssIndicationEvent|GetBssIndicationEvent]])
 
|-
 
|-
| 21 || GetBssIndicationInfo
+
| 21 || [9.0.0+] [[#DeleteIe|DeleteIe]] ([1.0.0-8.1.0] [[#GetBssIndicationInfo|GetBssIndicationInfo]])
 
|-
 
|-
| 22 || GetState
+
| 22 || [9.0.0+] [[#PutFrameRaw|PutFrameRaw]] ([1.0.0-8.1.0] [[#GetState_2|GetState]])
 
|-
 
|-
| 23 || GetAllowedChannels
+
| 23 || [9.0.0+] [[#CancelGetFrame|CancelGetFrame]] ([1.0.0-8.1.0] [[#GetAllowedChannels|GetAllowedChannels]])
 
|-
 
|-
| 24 || AddIe
+
| 24 || [9.0.0+] [[#CreateRxEntry|CreateRxEntry]] ([1.0.0-8.1.0] [[#AddIe|AddIe]])
 
|-
 
|-
| 25 || DeleteIe
+
| 25 || [9.0.0+] [[#DeleteRxEntry|DeleteRxEntry]] ([1.0.0-8.1.0] [[#DeleteIe|DeleteIe]])
 
|-
 
|-
| 26 ||  
+
| 26 || [9.0.0+] [[#AddEthertypeToRxEntry|AddEthertypeToRxEntry]] ([1.0.0-8.1.0] [[#PutFrameRaw|PutFrameRaw]])
 
|-
 
|-
| 27 ||  
+
| 27 || [9.0.0+] [[#DeleteEthertypeFromRxEntry|DeleteEthertypeFromRxEntry]] ([1.0.0-8.1.0] [[#CancelGetFrame|CancelGetFrame]])
 
|-
 
|-
| 28 || CreateRxEntry
+
| 28 || [9.0.0+] [[#AddMatchingDataToRxEntry|AddMatchingDataToRxEntry]] ([1.0.0-8.1.0] [[#CreateRxEntry|CreateRxEntry]])
 
|-
 
|-
| 29 || DeleteRxEntry
+
| 29 || [9.0.0+] [[#RemoveMatchingDataFromRxEntry|RemoveMatchingDataFromRxEntry]] ([1.0.0-8.1.0] [[#DeleteRxEntry|DeleteRxEntry]])
 
|-
 
|-
| 30 ||  
+
| 30 || [9.0.0+] [[#GetScanResult_2|GetScanResult]] ([1.0.0-8.1.0] [[#AddEthertypeToRxEntry|AddEthertypeToRxEntry]])
 
|-
 
|-
| 31 ||  
+
| 31 || [9.0.0+] [[#PutActionFrameOneShot|PutActionFrameOneShot]] ([1.0.0-8.1.0] [[#DeleteEthertypeFromRxEntry|DeleteEthertypeFromRxEntry]])
 
|-
 
|-
| 32 || AddMatchingDataToRxEntry
+
| 32 || [9.0.0+] [[#SetActionFrameWithBeacon|SetActionFrameWithBeacon]] ([1.0.0-8.1.0] [[#AddMatchingDataToRxEntry|AddMatchingDataToRxEntry]])
 
|-
 
|-
| 33 || RemoveMatchingDataFromRxEntry
+
| 33 || [9.0.0+] [[#CancelActionFrameWithBeacon|CancelActionFrameWithBeacon]] ([1.0.0-8.1.0] [[#RemoveMatchingDataFromRxEntry|RemoveMatchingDataFromRxEntry]])
 
|-
 
|-
| 34 || GetScanResult
+
| 34 || [9.0.0+] [[#CreateRxEntryForActionFrame|CreateRxEntryForActionFrame]] ([1.0.0-8.1.0] [[#GetScanResult_2|GetScanResult]])
 
|-
 
|-
| 35 ||  
+
| 35 || [9.0.0+] [[#DeleteRxEntryForActionFrame|DeleteRxEntryForActionFrame]] ([1.0.0-8.1.0] [[#PutActionFrameOneShot|PutActionFrameOneShot]])
 
|-
 
|-
| 36 || SetActionFrameWithBeacon
+
| 36 || [9.0.0+] [[#AddSubtypeToRxEntryForActionFrame|AddSubtypeToRxEntryForActionFrame]] ([1.0.0-8.1.0] [[#SetActionFrameWithBeacon|SetActionFrameWithBeacon]])
 
|-
 
|-
| 37 || CancelActionFrameWithBeacon
+
| 37 || [9.0.0+] [[#DeleteSubtypeFromRxEntryForActionFrame|DeleteSubtypeFromRxEntryForActionFrame]] ([1.0.0-8.1.0] [[#CancelActionFrameWithBeacon|CancelActionFrameWithBeacon]])
 
|-
 
|-
| 38 || CreateRxEntryForActionFrame
+
| 38 || [9.0.0+] [[#CancelGetActionFrame|CancelGetActionFrame]] ([1.0.0-8.1.0] [[#CreateRxEntryForActionFrame|CreateRxEntryForActionFrame]])
 
|-
 
|-
| 39 || DeleteRxEntryForActionFrame
+
| 39 || [9.0.0+] [[#GetRssi_2|GetRssi]] ([1.0.0-8.1.0] [[#DeleteRxEntryForActionFrame|DeleteRxEntryForActionFrame]])
 
|-
 
|-
| 40 ||  
+
| 40 || [9.0.0+] [[#SetMaxAssociationNumber|SetMaxAssociationNumber]] ([1.0.0-8.1.0] [[#AddSubtypeToRxEntryForActionFrame|AddSubtypeToRxEntryForActionFrame]])
 
|-
 
|-
| 41 ||  
+
| 41 || [9.0.0+] ([1.0.0-8.1.0] [[#DeleteSubtypeFromRxEntryForActionFrame|DeleteSubtypeFromRxEntryForActionFrame]])
 
|-
 
|-
| 42 || CancelGetActionFrame
+
| 42 || [9.0.0+] ([1.0.0-8.1.0] [[#CancelGetActionFrame|CancelGetActionFrame]])
 
|-
 
|-
| 43 || GetRssi
+
| 43 || [9.0.0+] ([1.0.0-8.1.0] [[#GetRssi_2|GetRssi]])
 
|-
 
|-
| 44 ||  
+
| 44 || [9.0.0+] ([1.0.0-8.1.0] [[#SetMaxAssociationNumber|SetMaxAssociationNumber]])
 
|-
 
|-
| 45 || [4.0.0+]
+
| 45 || [9.0.0+] ([4.0.0-8.1.0])
 
|-
 
|-
| 46 || [4.0.0+]
+
| 46 || [9.0.0+] ([4.0.0-8.1.0])
 
|-
 
|-
| 47 || [4.0.0+]
+
| 47 || [9.0.0+] ([4.0.0-8.1.0])
 
|-
 
|-
 
| 48 || [10.0.0+] ([4.0.0-8.1.0])
 
| 48 || [10.0.0+] ([4.0.0-8.1.0])
 
|-
 
|-
| 49 || [6.0.0-8.1.0]
+
| 49 || [13.0.0+] ([6.0.0-8.1.0])
|-
 
| 50 || [6.0.0-8.1.0]
 
|-
 
| 51 || [8.0.0-8.1.0]
 
|-
 
| 52 || [8.0.0-8.1.0]
 
 
|-
 
|-
| 49 || [13.0.0+]
+
| 50 || [13.0.0+] ([6.0.0-8.1.0])
 
|-
 
|-
| 50 || [13.0.0+]
+
| 51 || [13.0.0+] ([8.0.0-8.1.0])
 
|-
 
|-
| 51 || [13.0.0+]
+
| 52 || ([8.0.0-8.1.0])
 
|}
 
|}
  
[4.0.0+] CreateBss, Connect, and Join now takes an additional 4-bytes of input.
+
[5.0.0+] GetAllowedChannels now returns a total of 4-bytes of output instead of 0x50, and now takes a type-0xA output buffer.
 +
 
 +
[10.0.0+] Cmd46 now takes a total of 1-byte of input instead of 6-bytes, while cmd47 now takes a total of 6-bytes of input instead of 1-byte.
 +
 
 +
== OpenMasterMode ==
 +
No input/output.
 +
 
 +
Sends command message 0x7 to the state machine.
 +
 
 +
== CloseMasterMode ==
 +
No input/output.
 +
 
 +
Sends command message 0x5 to the state machine.
 +
 
 +
== OpenClientMode ==
 +
No input/output.
 +
 
 +
Sends command message 0x8 to the state machine.
 +
 
 +
== CloseClientMode ==
 +
No input/output.
 +
 
 +
Sends command message 0x5 to the state machine.
 +
 
 +
== OpenSpectatorMode ==
 +
No input/output.
 +
 
 +
Sends command message 0x9 to the state machine.
 +
 
 +
== CloseSpectatorMode ==
 +
No input/output.
 +
 
 +
Sends command message 0x5 to the state machine.
 +
 
 +
== OpenMode ==
 +
Takes an input u32 '''Mode'''. No output.
 +
 
 +
== CloseMode ==
 +
Takes an input u32 '''Mode'''. No output.
 +
 
 +
== GetMacAddress ==
 +
No input. Returns an output [[#MacAddress]].
 +
 
 +
Sends command message 0x18 (GetMacAddress) to the state machine.
 +
 
 +
== CreateBss ==
 +
Takes an input [[#Bss]]. No output.
 +
 
 +
Sends command messages 0xA (SetWlanInterfaceUpDown) and 0x1E (CreateAp) to the state machine.
 +
 
 +
== DestroyBss ==
 +
No input/output.
 +
 
 +
Sends command message 0x1F (DestroyAp) to the state machine.
 +
 
 +
== StartScan ==
 +
Takes a type-0x15 input buffer buffer containing a [[#ScanRequest]]. No output.
 +
 
 +
Sends command messages 0xA (SetWlanInterfaceUpDown) and 0x14 (ScanRequest) to the state machine.
 +
 
 +
== StopScan ==
 +
No input/output.
 +
 
 +
Sends command message 0x16 (CancelScan) to the state machine.
 +
 
 +
== Connect ==
 +
Takes an input [[#ConnectParam]]. No output.
 +
 
 +
Sends command messages 0xA (SetWlanInterfaceUpDown), 0x11 (SetBeaconLostTimeout), 0xF (SetStaticAesMode) and 0x20 (JoinNetworkSta) to the state machine.
 +
 
 +
== CancelConnect ==
 +
No input/output.
 +
 
 +
Sends command message 0x23 (CancelJoinNetwork) to the state machine.
 +
 
 +
== Join ==
 +
Takes an input [[#ConnectParam]]. No output.
 +
 
 +
Sends command messages 0xA (SetWlanInterfaceUpDown), 0x11 (SetBeaconLostTimeout), 0xF (SetStaticAesMode) and 0x22 (JoinNetworkSpectator) to the state machine.
 +
 
 +
== CancelJoin ==
 +
No input/output.
 +
 
 +
Sends command message 0x23 (CancelJoinNetwork) to the state machine.
 +
 
 +
== Disconnect ==
 +
Takes an input u32 '''Argument''' and an input [[#MacAddress]]. No output.
  
[5.0.0+] GetAllowedChannels now returns a total of 4-bytes of output instead of 0x50, and now takes a type-0xA output buffer.
+
Sends command message 0x25 (DeauthRequest) to the state machine.
 +
 
 +
== SetBeaconLostCount ==
 +
Takes an input u32 '''BeaconLostCount'''. No output.
 +
 
 +
== GetSystemEvent ==
 +
Takes an input u32 '''SystemEventType'''. Returns an output Event handle.
 +
 
 +
== GetConnectionStatus ==
 +
No input. Returns an output [[#ConnectionStatus]].
 +
 
 +
Sends command message 0x80 (GetState) to the state machine, to check current state. Then this copies data from state to output (unrelated to message 0x80).
 +
 
 +
== GetClientStatus ==
 +
Takes a type-0x16 output buffer containing a [[#ClientStatus]]. No output.
 +
 
 +
Sends command message 0x80 (GetState) to the state machine, to check current state.
 +
 
 +
== GetBssIndicationEvent ==
 +
No input. Returns an output Event handle.
 +
 
 +
== GetBssIndicationInfo ==
 +
Takes a type-0x16 output buffer. No output.
 +
 
 +
== GetState ==
 +
No input. Returns an output [[#State]].
 +
 
 +
Sends command message 0x80 (GetState) to the state machine.
 +
 
 +
== GetAllowedChannels ==
 +
Takes a type-0xA output buffer. Returns an output u32 '''AllowedChannelsCount'''.
 +
 
 +
== AddIe ==
 +
Takes a type-0x5 input buffer and an input u32 '''ManagementFrameType'''. Returns an output u32 '''Ie'''.
 +
 
 +
Sends command message 0x28 (AddIe) to the state machine.
 +
 
 +
== DeleteIe ==
 +
Takes an input u32 '''Ie'''. No output.
 +
 
 +
Sends command message 0x29 (DeleteIe) to the state machine.
 +
 
 +
== PutFrameRaw ==
 +
Takes a type-0x5 input buffer. No output.
 +
 
 +
Sends command message 0x80 (GetState) to the state machine, to check current state.
 +
 
 +
== CancelGetFrame ==
 +
Takes an input u32 '''RxId'''. No output.
 +
 
 +
Sends command message 0x80 (GetState) to the state machine, to check current state.
 +
 
 +
== CreateRxEntry ==
 +
Takes a type-0x9 input buffer and an input u32 '''Capacity'''. Returns an output u32 '''RxId'''.
 +
 
 +
== DeleteRxEntry ==
 +
Takes an input u32 '''RxId'''. No output.
 +
 
 +
== AddEthertypeToRxEntry ==
 +
Takes an input u32 '''RxId''' and an input u32 '''Protocol'''. No output.
 +
 
 +
== DeleteEthertypeFromRxEntry ==
 +
Takes an input u16 '''Protocol'''. Returns an output u32.
 +
 
 +
== AddMatchingDataToRxEntry ==
 +
Takes a type-0x19 input buffer and an input u32 '''RxId'''. No output.
 +
 
 +
[15.0.0+] Now takes a total of 0x1C-bytes of input.
 +
 
 +
Sends command message 0x2A (AddMatchingDataInfoToRxEntry) to the state machine.
 +
 
 +
== RemoveMatchingDataFromRxEntry ==
 +
Takes a type-0x19 input buffer and an input u32 '''RxId'''. No output.
 +
 
 +
[15.0.0+] Now takes a total of 0x1C-bytes of input.
 +
 
 +
Sends command message 0x2B (RemoveMatchingDataFromRxEntry) to the state machine.
 +
 
 +
== GetScanResult ==
 +
Takes a type-0x19 input buffer and a type-0x6 output buffer containing a [[#ScanResult]]. No output.
 +
 
 +
Sends command message 0x15 (BssInfoListGet) to the state machine.
 +
 
 +
== PutActionFrameOneShot ==
 +
Takes a type-0x5 input buffer, an input [[#MacAddress]] and two u32s '''Channel''' and '''DwellTime'''. No output.
 +
 
 +
Sends command message 0xA (SetWlanInterfaceUpDown) to the state machine.
 +
 
 +
== SetActionFrameWithBeacon ==
 +
Takes a type-0x5 input buffer. No output.
 +
 
 +
[15.0.0+] Now takes a type-0x21 input buffer instead of a type-0x5 input buffer.
 +
 
 +
Sends command message 0x2C (SetActionFrameWithBeacon) to the state machine.
 +
 
 +
== CancelActionFrameWithBeacon ==
 +
No input/output.
 +
 
 +
Sends command message 0x2D (CancelActionFrameWithBeacon) to the state machine.
 +
 
 +
== CreateRxEntryForActionFrame ==
 +
Takes a type-0x9 input buffer and an input u32 '''Capacity'''. Returns an output u32 '''RxId'''.
 +
 
 +
== DeleteRxEntryForActionFrame ==
 +
Takes an input u32 '''RxId'''. No output.
 +
 
 +
== AddSubtypeToRxEntryForActionFrame ==
 +
Takes an input u32 '''RxId''' and an input u32 '''Subtype'''. No output.
 +
 
 +
== DeleteSubtypeFromRxEntryForActionFrame ==
 +
Takes an input u32 '''Subtype'''. Returns an output u32.
 +
 
 +
== CancelGetActionFrame ==
 +
Takes an input u32 '''RxId'''. No output.
 +
 
 +
Sends command message 0x80 (GetState) to the state machine, to check current state.
 +
 
 +
== GetRssi ==
 +
No input. Returns an output u32 '''Rssi'''.
 +
 
 +
Sends command message 0x2E (GetRssi) to the state machine.
  
[9.0.0+] Almost all cmds had input/output changed / cmds moved around (?).
+
== SetMaxAssociationNumber ==
 +
Takes an input u32 '''MaxAssociationNumber'''. No output.
  
[10.0.0+] Cmd46 now takes a total of 1-byte of input instead of 6-bytes, while cmd47 now takes a total of 6-bytes of input instead of 1-byte.
+
Sends command message 0x31 (SetMaxAssociationNumber) to the state machine.
  
 
= wlan:lg =
 
= wlan:lg =
 
This is "nn::wlan::detail::ILocalGetFrame".
 
This is "nn::wlan::detail::ILocalGetFrame".
 +
 +
This service no longer exists in [15.0.0+].
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 226: Line 785:
 
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || GetFrameRaw
+
| 0 || [[#GetFrameRaw|GetFrameRaw]]
 
|}
 
|}
 +
 +
== GetFrameRaw ==
 +
Takes a type-0x6 output buffer and an input u32 '''RxId'''. Returns an output u32 '''FrameSize'''.
 +
 +
Sends command message 0x80 (GetState) to the state machine, to check current state.
  
 
= wlan:lga =
 
= wlan:lga =
 
This is "nn::wlan::detail::ILocalGetActionFrame".
 
This is "nn::wlan::detail::ILocalGetActionFrame".
 +
 +
This service no longer exists in [15.0.0+].
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 236: Line 802:
 
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || GetActionFrame
+
| 0 || [[#GetActionFrame|GetActionFrame]]
 
|}
 
|}
  
[5.0.0+] Cmd0 now takes an additional 4-bytes of input, and returns an additional 4-bytes of output.
+
== GetActionFrame ==
 +
Takes a type-0x6 output buffer and an input u32 '''RxId'''. Returns an output [[#MacAddress]] and an output u32 '''ActionFrame'''.
 +
 
 +
[5.0.0+] Now takes another input u32 and returns another output u32.
  
 
= wlan:sg =
 
= wlan:sg =
 
This is "nn::wlan::detail::ISocketGetFrame".
 
This is "nn::wlan::detail::ISocketGetFrame".
 +
 +
This service no longer exists in [15.0.0+].
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 248: Line 819:
 
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || GetFrameRaw
+
| 0 || [[#GetFrameRaw_2|GetFrameRaw]]
 
|}
 
|}
 +
 +
== GetFrameRaw ==
 +
Takes a type-0x6 output buffer and an input u32 '''RxId'''. Returns an output u32 '''FrameSize'''.
  
 
= wlan:soc =
 
= wlan:soc =
 
This is "nn::wlan::detail::ISocketManager".
 
This is "nn::wlan::detail::ISocketManager".
 +
 +
This service no longer exists in [15.0.0+].
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 258: Line 834:
 
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || PutFrameRaw
+
| 0 || [[#PutFrameRaw_2|PutFrameRaw]]
 
|-
 
|-
| 1 || CancelGetFrame
+
| 1 || [[#CancelGetFrame_2|CancelGetFrame]]
 
|-
 
|-
| 2 || CreateRxEntry
+
| 2 || [[#CreateRxEntry_2|CreateRxEntry]]
 
|-
 
|-
| 3 || DeleteRxEntry
+
| 3 || [[#DeleteRxEntry_2|DeleteRxEntry]]
 
|-
 
|-
| 4 || AddEthertypeToRxEntry
+
| 4 || [[#AddEthertypeToRxEntry_2|AddEthertypeToRxEntry]]
 
|-
 
|-
| 5 || DeleteEthertypeFromRxEntry
+
| 5 || [[#DeleteEthertypeFromRxEntry_2|DeleteEthertypeFromRxEntry]]
 
|-
 
|-
| 6 || GetMacAddress
+
| 6 || [[#GetMacAddress_3|GetMacAddress]]
 
|-
 
|-
| 7 || SwitchTsfTimerFunction
+
| 7 || [[#SwitchTsfTimerFunction|SwitchTsfTimerFunction]]
 
|-
 
|-
| 8 || GetDeltaTimeBetweenSystemAndTsf
+
| 8 || [[#GetDeltaTimeBetweenSystemAndTsf|GetDeltaTimeBetweenSystemAndTsf]]
 
|-
 
|-
| 9 || RegisterSharedMemory
+
| 9 || [[#RegisterSharedMemory|RegisterSharedMemory]]
 
|-
 
|-
| 10 || UnregisterSharedMemory
+
| 10 || [[#UnregisterSharedMemory|UnregisterSharedMemory]]
 
|-
 
|-
| 11 || EnableSharedMemory
+
| 11 || [[#EnableSharedMemory|EnableSharedMemory]]
 
|-
 
|-
| 12 || [6.0.0+]
+
| 12 || [6.0.0+] [[#SetMulticastList|SetMulticastList]]
 
|}
 
|}
 +
 +
== PutFrameRaw ==
 +
Takes a type-0x5 input buffer. No output.
 +
 +
Sends command message 0x80 (GetState) to the state machine, to check current state.
 +
 +
== CancelGetFrame ==
 +
Takes an input u32 '''RxId'''. No output.
 +
 +
Sends command message 0x80 (GetState) to the state machine, to check current state.
 +
 +
== CreateRxEntry ==
 +
Takes a type-0x9 input buffer and an input u32 '''Capacity'''. Returns an output u32 '''RxId'''.
 +
 +
== DeleteRxEntry ==
 +
Takes an input u32 '''RxId'''. No output.
 +
 +
== AddEthertypeToRxEntry ==
 +
Takes an input u32 '''RxId''' and an input u32 '''Protocol'''. No output.
 +
 +
== DeleteEthertypeFromRxEntry ==
 +
Takes an input u16 '''Protocol'''. Returns an output u32.
 +
 +
== GetMacAddress ==
 +
No input. Returns an output [[#MacAddress]].
 +
 +
Sends command message 0x18 (GetMacAddress) to the state machine.
 +
 +
== SwitchTsfTimerFunction ==
 +
Takes an input bool. No output.
 +
 +
Sends command message 0x2F (SetTsfTimerEventmask) to the state machine.
 +
 +
== GetDeltaTimeBetweenSystemAndTsf ==
 +
No input. Returns an u64 '''DeltaTimeBetweenSystemAndTsf'''.
 +
 +
== RegisterSharedMemory ==
 +
Takes an input SharedMemory handle, an u32 '''SharedMemorySize''' and four input Event handles '''RxPacketEventHandle''', '''TxPacketEventHandle''', '''RxCbufEventHandle''' and '''TxCbufEventHandle'''. No output.
 +
 +
[15.0.0+] Stubbed. Returns 0.
 +
 +
== UnregisterSharedMemory ==
 +
No input/output.
 +
 +
[15.0.0+] Stubbed. Returns 0.
 +
 +
== EnableSharedMemory ==
 +
No input/output.
 +
 +
[15.0.0+] Stubbed. Returns 0.
 +
 +
== SetMulticastList ==
 +
Unofficial name.
 +
 +
Takes an input [[#MulticastList]]. No output.
  
 
= wlan:dtc =
 
= wlan:dtc =
 +
This is "nn::wlan::detail::IDetectManager".
 +
 
This was added with [6.0.0+].
 
This was added with [6.0.0+].
 +
 +
This service no longer exists in [15.0.0+].
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 351: Line 986:
 
[7.0.0+] Cmd14 now takes an input u8.
 
[7.0.0+] Cmd14 now takes an input u8.
  
= Notes =
+
= wlan =
 +
This is "nn::wlan::detail::IGeneralServiceCreator".
 +
 
 +
This was added with [15.0.0+].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#CreateWirelessCommunicationService]]
 +
|}
 +
 
 +
== CreateWirelessCommunicationService ==
 +
Unofficial name.
 +
 
 +
No input. Returns an [[#IWirelessCommunicationService]].
 +
 
 +
== IWirelessCommunicationService ==
 +
This is "nn::wlan::detail::IWirelessCommunicationService".
 +
 
 +
This was added with [15.0.0+].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 ||
 +
|-
 +
| 1 ||
 +
|-
 +
| 10 ||
 +
|-
 +
| 11 ||
 +
|-
 +
| 12 ||
 +
|-
 +
| 13 ||
 +
|-
 +
| 14 ||
 +
|-
 +
| 20 ||
 +
|-
 +
| 21 ||
 +
|-
 +
| 30 ||
 +
|-
 +
| 31 ||
 +
|-
 +
| 32 ||
 +
|-
 +
| 33 || [[#GetMacAddress|GetMacAddress]]
 +
|-
 +
| 40 ||
 +
|-
 +
| 41 ||
 +
|-
 +
| 42 ||
 +
|-
 +
| 43 || [[#CreateRxEntry|CreateRxEntry]]
 +
|-
 +
| 44 || [[#DeleteRxEntry|DeleteRxEntry]]
 +
|-
 +
| 45 || [[#AddEthertypeToRxEntry|AddEthertypeToRxEntry]]
 +
|-
 +
| 46 || [[#DeleteEthertypeFromRxEntry|DeleteEthertypeFromRxEntry]]
 +
|-
 +
| 47 || [[#AddMatchingDataToRxEntry|AddMatchingDataToRxEntry]]
 +
|-
 +
| 48 || [[#RemoveMatchingDataFromRxEntry|RemoveMatchingDataFromRxEntry]]
 +
|-
 +
| 50 || [[#AddIe|AddIe]]
 +
|-
 +
| 51 || [[#DeleteIe|DeleteIe]]
 +
|-
 +
| 60 || [[#StartScan|StartScan]]
 +
|-
 +
| 61 || [[#StopScan|StopScan]]
 +
|-
 +
| 62 || [[#GetBssIndicationEvent|GetBssIndicationEvent]]
 +
|-
 +
| 63 || [[#GetScanResult|GetScanResult]]
 +
|-
 +
| 70 || [[#RegisterSharedMemory|RegisterSharedMemory]]
 +
|-
 +
| 71 || [[#UnregisterSharedMemory|UnregisterSharedMemory]]
 +
|-
 +
| 72 || [[#EnableSharedMemory|EnableSharedMemory]]
 +
|-
 +
| 80 ||
 +
|-
 +
| 81 ||
 +
|-
 +
| 90 ||
 +
|-
 +
| 91 ||
 +
|-
 +
| 92 ||
 +
|-
 +
| 93 ||
 +
|-
 +
| 94 ||
 +
|-
 +
| 95 || [[#SetActionFrameWithBeacon|SetActionFrameWithBeacon]]
 +
|-
 +
| 96 || [[#CancelActionFrameWithBeacon|CancelActionFrameWithBeacon]]
 +
|-
 +
| 97 || [[#SetMaxAssociationNumber|SetMaxAssociationNumber]]
 +
|-
 +
| 98 ||
 +
|-
 +
| 100 ||
 +
|-
 +
| 101 ||
 +
|-
 +
| 102 ||
 +
|-
 +
| 103 ||
 +
|-
 +
| 104 ||
 +
|-
 +
| 105 ||
 +
|-
 +
| 106 ||
 +
|-
 +
| 107 || [[#SetMulticastList|SetMulticastList]]
 +
|-
 +
| 108 || [[#SetDfrts|SetDfrts]]
 +
|-
 +
| 110 ||
 +
|-
 +
| 111 ||
 +
|-
 +
| 112 ||
 +
|-
 +
| 113 ||
 +
|}
 +
 
 +
= wlan:p =
 +
This is "nn::wlan::detail::IPrivateServiceCreator".
 +
 
 +
This was added with [15.0.0+].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#CreateWirelessCommunicationService]]
 +
|-
 +
| 1 || [[#CreatePrivateWirelessCommunicationService]]
 +
|}
 +
 
 +
== CreatePrivateWirelessCommunicationService ==
 +
Unofficial name.
 +
 
 +
No input. Returns an [[#IPrivateWirelessCommunicationService]].
 +
 
 +
== IPrivateWirelessCommunicationService ==
 +
This is "nn::wlan::detail::IPrivateWirelessCommunicationService".
 +
 
 +
This was added with [15.0.0+].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#GetFwVersion|GetFwVersion]]
 +
|-
 +
| 1 || [[#ChangeRxAntenna|ChangeRxAntenna]]
 +
|-
 +
| 2 ||
 +
|-
 +
| 3 ||
 +
|-
 +
| 4 ||
 +
|-
 +
| 5 ||
 +
|-
 +
| 6 ||
 +
|-
 +
| 7 ||
 +
|-
 +
| 8 ||
 +
|-
 +
| 9 ||
 +
|-
 +
| 10 ||
 +
|-
 +
| 11 ||
 +
|-
 +
| 12 ||
 +
|-
 +
| 13 || SwitchTsfTimerFunctionOn
 +
|-
 +
| 14 || SwitchTsfTimerFunctionOff
 +
|-
 +
| 15 || [[#GetDeltaTimeBetweenSystemAndTsf|GetDeltaTimeBetweenSystemAndTsf]]
 +
|-
 +
| 16 ||
 +
|-
 +
| 17 ||
 +
|-
 +
| 18 ||
 +
|-
 +
| 19 ||
 +
|-
 +
| 20 ||
 +
|-
 +
| 21 ||
 +
|-
 +
| 22 ||
 +
|}
 +
 
 +
= wlan:nd =
 +
This is "nn::anif::detail::ISfDriverServiceCreator".
 +
 
 +
This was added with [15.0.0+].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#CreateDriverService]]
 +
|}
 +
 
 +
== CreateDriverService ==
 +
Unofficial name.
 +
 
 +
No input. Returns an [[#ISfDriverService]].
 +
 
 +
== ISfDriverService ==
 +
This is "nn::anif::detail::ISfDriverService".
 +
 
 +
This was added with [15.0.0+].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#CreateNetworkInterfaceService]]
 +
|-
 +
| 128 ||
 +
|-
 +
| 129 ||
 +
|-
 +
| 130 ||
 +
|-
 +
| 131 ||
 +
|-
 +
| 384 ||
 +
|-
 +
| 385 ||
 +
|-
 +
| 386 ||
 +
|-
 +
| 387 ||
 +
|-
 +
| 388 ||
 +
|-
 +
| 389 ||
 +
|}
 +
 
 +
=== CreateNetworkInterfaceService ===
 +
Unofficial name.
 +
 
 +
Takes a type-0x21 input buffer. Returns an [[#ISfNetworkInterfaceService]].
 +
 
 +
=== ISfNetworkInterfaceService ===
 +
This is "nn::anif::detail::ISfNetworkInterfaceService".
 +
 
 +
This was added with [15.0.0+].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 ||
 +
|-
 +
| 1 ||
 +
|-
 +
| 2 ||
 +
|-
 +
| 3 ||
 +
|-
 +
| 4 ||
 +
|-
 +
| 5 ||
 +
|-
 +
| 6 ||
 +
|-
 +
| 128 ||
 +
|-
 +
| 129 ||
 +
|-
 +
| 130 ||
 +
|-
 +
| 131 ||
 +
|-
 +
| 256 ||
 +
|-
 +
| 257 ||
 +
|-
 +
| 258 ||
 +
|-
 +
| 259 ||
 +
|-
 +
| 260 ||
 +
|-
 +
| 261 ||
 +
|-
 +
| 262 ||
 +
|-
 +
| 384 ||
 +
|-
 +
| 385 ||
 +
|-
 +
| 386 ||
 +
|-
 +
| 387 ||
 +
|-
 +
| 388 ||
 +
|-
 +
| 389 ||
 +
|}
 +
 
 +
= Ssid =
 +
This is "nn::wlan::Ssid". This is a 0x22-byte struct.
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0 || 0x1 || Length
 +
|-
 +
| 0x1 || 0x20 || Ssid
 +
|-
 +
| 0x21 || 0x1 || Reserved
 +
|}
 +
 
 +
= MacAddress =
 +
This is a 0x6-byte struct with 1-byte alignment.
 +
 
 +
= ConnectParam =
 +
This is a 0x80-byte struct.
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0 || 0x22 || [[#Ssid|Ssid]]
 +
|-
 +
| 0x22 || 0x6 || [[#MacAddress|Bssid]]
 +
|-
 +
| 0x28 || 0x1 ||
 +
|-
 +
| 0x29 || 0x1 || Reserved
 +
|-
 +
| 0x2A || 0x2 || Channel
 +
|-
 +
| 0x2C || 0x4 || PrivacyMode
 +
|-
 +
| 0x30 || 0x4 || GroupPrivacyMode
 +
|-
 +
| 0x34 || 0x4 || KeyIdx
 +
|-
 +
| 0x38 || 0x40 || SecurityKey
 +
|-
 +
| 0x78 || 0x4 || Reserved
 +
|-
 +
| 0x7C || 0x4 || BeaconLostTimeout
 +
|}
 +
 
 +
= ConnectionStatus =
 +
This is a 0x3C-byte struct.
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0 || 0x4 || [[#ConnectionState|ConnectionState]]
 +
|-
 +
| 0x4 || 0x4 ||
 +
|-
 +
| 0x8 || 0x2 || Channel
 +
|-
 +
| 0xA || 0x6 || [[#MacAddress|Bssid]]
 +
|-
 +
| 0x10 || 0x22 || [[#Ssid|Ssid]]
 +
|-
 +
| 0x32 || 0x2 ||
 +
|-
 +
| 0x34 || 0x2 ||
 +
|-
 +
| 0x36 || 0x2 ||
 +
|-
 +
| 0x38 || 0x2 ||
 +
|-
 +
| 0x3A || 0x2 || Reserved
 +
|}
 +
 
 +
= ClientStatus =
 +
This is a 0xE4-byte struct.
 +
 
 +
= ScanRequest =
 +
This is a 0x1B8-byte struct.
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0 || 0x4 || ScanType
 +
|-
 +
| 0x4 || 0x2 * 38 ||
 +
|-
 +
| 0x50 || 0x1 ||
 +
|-
 +
| 0x51 || 0x3 || Reserved
 +
|-
 +
| 0x54 || 0x4 || ChannelScanTime
 +
|-
 +
| 0x58 || 0x4 || HomeChannelTime
 +
|-
 +
| 0x5C || 0x22 * 10 || Array of [[#Ssid|Ssid]]
 +
|-
 +
| 0x1B0 || 0x1 || SsidCount
 +
|-
 +
| 0x1B1 || 0x6 || [[#MacAddress|Bssid]]
 +
|-
 +
| 0x1B7 || 0x1 || Reserved
 +
|}
 +
 
 +
= ScanResult =
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0 || 0x4 || ScanBufferCapacity
 +
|-
 +
| 0x4 || 0x4 || BssInfoSize
 +
|-
 +
| 0x8 || 0x4 || BssInfoCount
 +
|-
 +
| 0xC || Variable || Array of [[#BssInfo]]
 +
|}
 +
 
 +
= Bss =
 +
This is a 0x80-byte struct.
 +
 
 +
[4.0.0+] This is a 0x84-byte struct.
 +
 
 +
= BssInfo =
 +
This is a 0x58-byte struct.
 +
 
 +
= ConnectionState =
 +
This is "nn::wlan::ConnectionState".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value
 +
! Description
 +
|-
 +
| 0 || None
 +
|-
 +
| 1 || Idle
 +
|-
 +
| 2 || Connected
 +
|-
 +
| 3 || Scanning
 +
|-
 +
| 4 || Connecting
 +
|-
 +
| 5 || CancelingScan
 +
|-
 +
| 6 || Disconnecting
 +
|}
 +
 
 +
= State =
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value
 +
! Description
 +
|-
 +
| 0 ||
 +
|-
 +
| 1 ||
 +
|-
 +
| 2 ||
 +
|-
 +
| 3 ||
 +
|-
 +
| 4 ||
 +
|-
 +
| 5 ||
 +
|-
 +
| 6 ||
 +
|-
 +
| 7 ||
 +
|-
 +
| 8 ||
 +
|-
 +
| 9 ||
 +
|-
 +
| 10 ||
 +
|-
 +
| 11 ||
 +
|-
 +
| 12 ||
 +
|-
 +
| 13 ||
 +
|-
 +
| 14 ||
 +
|-
 +
| 15 ||
 +
|-
 +
| 16 ||
 +
|-
 +
| 17 ||
 +
|-
 +
| 18 ||
 +
|-
 +
| 19 ||
 +
|}
 +
 
 +
= WpsPin =
 +
This is a 0x8-byte string.
 +
 
 +
= MulticastList =
 +
This is a 0x31-byte struct.
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0 || 0x1 || Count
 +
|-
 +
| 0x1 || 0x30 || Array of [[#MacAddress]]
 +
|}
 +
 
 +
= WakeUpStats =
 +
This is a 0x20-byte struct.
 +
 
 +
This is updated during RequestWakeUp. The fields starting with offset +0x4 are updated when handling [[#Cmd19|wowl]], which counter is updated depends on the value of iovar "tcpka_wake_cause".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0 || 0x4 || Number of normal non-wowl wakeups. Also incremented during wowl handling if the output from the func using "tcpka_wake_cause" is 0.
 +
|-
 +
| 0x4 || 0x4 ||
 +
|-
 +
| 0x8 || 0x4 ||
 +
|-
 +
| 0xC || 0x4 ||
 +
|-
 +
| 0x10 || 0x4 ||
 +
|-
 +
| 0x14 || 0x4 ||
 +
|-
 +
| 0x18 || 0x4 ||
 +
|-
 +
| 0x1C || 0x4 || Number of wowl wakeups where the cause is unrecognized.
 +
|}
 +
 
 +
= SleepStats =
 +
This is a 0x38-byte struct.
 +
 
 +
During RequestWakeUp when handling [[#Cmd19|wowl]], this data in state is updated by adding each field with the corresponding field from iovar "sleep_stats_get".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0 || 0x4 ||
 +
|-
 +
| 0x4 || 0x4 ||
 +
|-
 +
| 0x8 || 0x4 ||
 +
|-
 +
| 0xC || 0x4 ||
 +
|-
 +
| 0x10 || 0x4 ||
 +
|-
 +
| 0x14 || 0x4 ||
 +
|-
 +
| 0x18 || 0x4 ||
 +
|-
 +
| 0x1C || 0x4 ||
 +
|-
 +
| 0x20 || 0x4 ||
 +
|-
 +
| 0x24 || 0x4 ||
 +
|-
 +
| 0x28 || 0x4 ||
 +
|-
 +
| 0x2C || 0x4 ||
 +
|-
 +
| 0x30 || 0x4 ||
 +
|-
 +
| 0x34 || 0x4 ||
 +
|}
 +
 
 +
= FwVersion =
 +
This is a 0x100-byte string.
  
== Versions ==
 
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
 
! System Version
 
! System Version
! Firmware string
+
! Firmware String
 
|-
 
|-
 
| [1.0.0] || 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-aoe Version: 7.35.252.58 CRC: f592f3bf Date: Tue 2016-10-04 23:54:54 PDT Ucode Ver: 1020.221 FWID: 01-5ec2fbfd
 
| [1.0.0] || 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-aoe Version: 7.35.252.58 CRC: f592f3bf Date: Tue 2016-10-04 23:54:54 PDT Ucode Ver: 1020.221 FWID: 01-5ec2fbfd
Line 382: Line 1,634:
 
|-
 
|-
 
| [12.0.0-13.0.0] || 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.104 (r728022) CRC: f0b454ec Date: Wed 2021-02-24 04:39:25 PST Ucode Ver: 1020.228 FWID 01-fbba058
 
| [12.0.0-13.0.0] || 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.104 (r728022) CRC: f0b454ec Date: Wed 2021-02-24 04:39:25 PST Ucode Ver: 1020.228 FWID 01-fbba058
 +
|-
 +
| [14.0.0-15.0.0] || 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.108 (c216b7c) CRC: 1be69227 Date: Sun 2021-08-29 19:24:39 PDT Ucode Ver: 1020.228 FWID 01-65333037
 
|}
 
|}
  
Line 388: Line 1,642:
 
* [6.0.0+] Besides the version update, added "clm_4356a3_ntd" to the string.
 
* [6.0.0+] Besides the version update, added "clm_4356a3_ntd" to the string.
 
* [7.0.0+] Besides the version update, added "noclminc" to the string.
 
* [7.0.0+] Besides the version update, added "noclminc" to the string.
 +
 +
= Notes =
 +
Originally wlan-sysmodule had a func called from nnMain which (among other things) handled configuring [[Bus_services|GPIO]] WifiReset (uses commands SetDirection and SetValue with input value 1), when not disabled by a system-setting. This GPIO functionality was removed from wlan with [7.0.0+], it was redundant since [[PCIe_services|pcie]] already had code handling that GPIO as well.
  
 
[[Category:Services]]
 
[[Category:Services]]

Latest revision as of 19:40, 9 November 2022

wlan:inf

This is "nn::wlan::detail::IInfraManager".

This service no longer exists in [15.0.0+].

Cmd Name
0 OpenMode
1 CloseMode
2 GetMacAddress
3 StartScan
4 StopScan
5 Connect
6 CancelConnect
7 Disconnect
8 GetSystemEvent
9 GetConnectionStatus
10 GetState
11 GetScanResult
12 GetRssi
13 ChangeRxAntenna
14 GetFwVersion
15 RequestSleep
16 RequestWakeUp
17 ConnectWithWps
18 [3.0.0+]
19 [3.0.0+]
20 [3.0.0+]
21 [3.0.0+]
22 [3.0.0+]
23 [3.0.0+]
24 [3.0.0+]
25 [3.0.0+]
26 [4.0.0+]
27 [4.0.0+]
28 [5.0.0+] InitializeWlan
29 [7.0.0+] FinalizeWlan
30 [8.0.0+] SetWowlDelayedWakeTime
31 [11.0.0+]
32 [11.0.0+]
33 [11.0.0+]
34 [11.0.0+]
35 [11.0.0+]
36 [11.0.0+]
37 [11.0.0+]
38 [13.0.0+] SetDfrts

[4.0.0+] Connect now takes an additional 4-bytes of input.

[5.0.0+] Cmd24 now returns a total of 0x58-bytes of output instead of 0x5C.

[7.0.0+] Input/output for cmds 27/28 were swapped, perhaps these cmds were swapped?

OpenMode

No input/output.

Sends command message 0x99 to the state machine.

This is used by nifm.

CloseMode

No input/output.

Sends command message 0x9A to the state machine.

This is used by nifm.

GetMacAddress

No input. Returns an output #MacAddress.

Sends command message 0x18 (GetMacAddress) to the state machine.

This is used by nifm.

StartScan

Takes a type-0x15 input buffer buffer containing a #ScanRequest. No output.

[15.0.0+] Now takes a type-0x19 input buffer instead of a type-0x15 input buffer.

Sends command messages 0xA (SetWlanInterfaceUpDown) and 0x14 (ScanRequest) to the state machine.

This is used by nifm.

StopScan

No input/output.

Sends command message 0x16 (CancelScan) to the state machine.

This is used by nifm.

Connect

Takes an input #ConnectParam. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown), 0x11 (SetBeaconLostTimeout) and 0x20 (JoinNetworkSta) to the state machine.

This is used by nifm.

CancelConnect

No input/output.

Sends command message 0x23 (CancelJoinNetwork) to the state machine.

This is used by nifm.

Disconnect

No input/output.

Sends command message 0x24 (DisconnectRequest) to the state machine.

This is used by nifm.

GetSystemEvent

Takes an input u32 SystemEventType. Returns an output Event handle.

This is used by nifm.

GetConnectionStatus

No input. Returns an output #ConnectionStatus.

Sends command message 0x80 (GetState) to the state machine, to check current state. Then this copies data from state to output (unrelated to message 0x80).

This is used by nifm.

GetState

No input. Returns an output #State.

Sends command message 0x80 (GetState) to the state machine.

This is used by nifm.

GetScanResult

Takes a type-0x6 output buffer containing a #ScanResult. No output.

Sends command message 0x15 (BssInfoListGet) to the state machine.

This is used by nifm.

GetRssi

No input. Returns an output u32 Rssi.

Sends command message 0x2E (GetRssi) to the state machine.

This is used by nifm.

ChangeRxAntenna

Takes an input u32. No output.

Sends command message 0x30 (SetRxChain) to the state machine.

The input value must be 1-3.

The message handler calls two vfuncs. The first vfunc uses the input u32 directly to configure "rxchain". The second vfunc configures "btc_params" with data determined using the input value.

This is not used on retail.

GetFwVersion

Takes a type-0xA output buffer containing a #FwVersion. No output.

Sends command message 0x33 (GetFwVersion) to the state machine. The handler validates state, then gets the value for config "ver".

This is not used on retail.

RequestSleep

No input/output.

Sends command messages 0x24 (DisconnectRequest), 0x34 (RequestSleep), 0x3D and 0x3E to the state machine.

First message GetState is sent, if state is 0x3 it does the following:

  • Sends message 0x3D. If successful and the output u8 is 0, this then does the following:
    • Uses GetState to check for state 0x2/0x3. On success message DisconnectRequest is sent. If state is invalid or the command message failed, this will Abort.
    • Uses GetState to check for state 0x1/0x2/0xA. On success message 0x9A with param=0 is sent. If state is invalid or the command message failed, this will Abort.

Then message RequestSleep is sent. If the Result is not 0x146B (including success), it returns the Result. Otherwise when the Result is that value, it does the following:

  • Sends message 0x3E.
    • Uses GetState to check for state 0x2/0x3. On success message DisconnectRequest is sent. If state is invalid or the command message failed, this will Abort.
    • Uses GetState to check for state 0x1/0x2/0xA. On success message 0x9A with param=0 is sent. If state is invalid or the command message failed, this will Abort.
    • Then this cmpl impl func will return the Result from calling itself.

This is used by nifm.

RequestWakeUp

No input/output.

Sends command messages 0x1 (InitalizeWlanDriver), 0x24 (DisconnectRequest), 0x35 (RequestWakeUp), 0x3E, 0x80 (GetState) and 0x81 (GetStateBeforeSleep) to the state machine.

First message GetState is sent, returning 0 if state is 0xC, or throwing error if it isn't 0xA. Then message RequestWakeUp is sent, if successful then message 0x3E is sent and 0 is returned.

If RequestWakeUp fails it will immediately return the Result, unless the Result is one of the following:

  • 0xE86B (normal non-wowl codepath was previously used during RequestSleep): Sends message InitalizeWlanDriver, returning a Result on failure. Then message GetStateBeforeSleep is sent. If the output state is 0x1, it returns 0. If not 0x2 or the second output field is non-zero, it will Abort. Uses GetState to verify the state is valid, returning the Result from that on failure. Otherwise this will return the Result from sending command request 0x99 with param=0.
  • 0xE66B: Sends message 0x3E. Uses GetState to verify the state is valid, when valid then message DisconnectRequest is sent. If state-validation/DisconnectRequest failed this will Abort, otherwise this then returns 0.

This is used by nifm.

ConnectWithWps

Takes a type-0x9 input buffer containing a #WpsPin and two input u32s WpsMethod and BeaconLostTimeout. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown), 0x11 (SetBeaconLostTimeout) and 0x21 (JoinNetworkStaWithWps) to the state machine.

This is not used on retail.

Cmd18

No input, returns an output u32.

Sends command message 0x80 (GetState) to the state machine, to check current state. Sends command message 0x36 to the state machine to get a value from state, which is then passed to a vfunc call. That func checks bits in the input to determine what value to return, which is then written to the output u32.

This is not used on retail.

Cmd19

Takes an input #MacAddress, three input u16s SrcPort, DstPort and Unk0, and three input u32s SrcIp, DstIp and Unk1. No output.

This copies the input data into state, and sets a flag in state. The input is written into state with the following structure: #MacAddress, SrcIp, DstIp, SrcPort, DstPort, Unk1, Unk0.

This data is used during RequestSleep if a state field is set for using it (the codepath using this will throw an error if this data was not set). This data is cleared afterwards unless sleep was successfully entered with wowl. This is also cleared during RequestWakeUp. This is used for configuring various config related to wowl/tcpka/etc (wake-on-WLAN/TCP keep-alive). Note that an error is thrown if "wowl_activate" isn't set but sysmodule-side doesn't do so - this seems to be set automatically at some point.

This is used by nifm.

Cmd20

No input/output.

This clears the state set by #Cmd19.

This is not used on retail.

Cmd21

No input, returns an output u32.

Same as #Cmd18 except the value from the request is returned directly, without calling the vfunc.

This is not used on retail.

Cmd22

Takes an input u32, no output.

Same as #Cmd21 except this uses message 0x37 with the input u32. This is handled by writing the u32 into a global field (default value is 0xBC), which is used during configuration for "wowl".

This is not used on retail.

Cmd23

Takes an input u32, no output.

Sends command message 0x38 to the state machine. This is handled by writing the input value into a global flags field. The default value is 0x3 (all flag bits set). These flag bits are checked during the RequestSleep code handling the state for #Cmd19.

This is not used on retail.

Cmd24

No input, returns a #WakeUpStats and a #SleepStats.

Sends command message 0x39 to the state machine, with 0x20-bytes from the output being copied to the first output struct. Sends command message 0x3A to the state machine, with 0x38-bytes from the output being copied to the second output struct.

These requests get data from state.

This is not used on retail.

Cmd25

Takes two input bools, no output.

When the first bool flag is set, sends command message 0x3B to the state machine. When the second bool flag is set, sends command message 0x3C to the state machine. Then 0 is returned.

Both requests are handled by clearing various data in state. The first request clears the first state struct returned by #Cmd24, likewise with the second request and the second state struct from #Cmd24.

This is not used on retail.

Cmd26

No input/output.

This sends a request which sets a global flag.

This flag is eventually checked by code which runs via RequestSleep, and in one case with wlan:dtc cmd19 (also used by requests done by nnMain/RequestWakeUp).

This is not used on retail.

Cmd27

Takes a type-0xA output buffer containing an array of 2-byte entries, returns an output u32 total_out.

This memcpys data from state into the output buffer, clamped to a maximum of 0x40 entries (nifm hard-codes the count to 0x26).

This is used by nifm.

InitializeWlan

No input/output.

Sends command message 0x1 (InitalizeWlanDriver) to the state machine.

This is not used on retail.

FinalizeWlan

No input/output.

Sends command message 0x2 (FinalizeWlanDriver) to the state machine.

This is not used on retail.

SetWowlDelayedWakeTime

Unofficial name.

Takes an input s32 WowlDelayedWakeTime. No output.

WowlDelayedWakeTime must be <=0xE10 (3600) and >= -1. This value is written into state (last field in the state struct also used by #Cmd19, which #Cmd19 doesn't write), then this returns 0.

The user-process code using this cmd also has the above bounds check.

This is used by wlan during RequestSleep from the same code using the state set by #Cmd19.

This cmd is used by nifm with a value from state, prior to using RequestSleep.

If wificore gets to the point of actually using this for TCP-keep-alive, then it does the following:

  • This is only used when the TCP connection is RST.
    • WowlDelayedWakeTime is the time in seconds to schedule a timer which will wake the system. 0 will schedule it for immediately.
    • -1 will skip scheduling that timer, hence waking the system is disabled when RST is received.
    • The wificore also supports -3 for immediately waking the system from the frame-handler, however wlan-sysmodule doesn't allow that.
  • Frames where the TCP flags do not match ACK will immediately wake the system, + other wake cause(s).

Cmd31

No input/output.

Stubbed, just returns an error.

This is not used on retail.

Cmd32

No input/output.

Stubbed, just returns an error.

This is not used on retail.

Cmd33

Takes an input #MacAddress and a type-0x5 input buffer, no output.

Stubbed, just returns an error.

This is not used on retail.

Cmd34

Takes a type-0x6 output buffer and returns a total of 0x10-bytes.

Stubbed, just returns an error.

This is not used on retail.

Cmd35

No input/output.

Stubbed, just returns an error.

This is not used on retail.

Cmd36

Takes two input u64s, no output.

Stubbed, just returns an error.

This is not used on retail.

Cmd37

Takes an input u32, no output.

Stubbed, just returns an error.

This is not used on retail.

SetDfrts

Unofficial name.

Takes an input u32 Mode. No output.

[15.0.0+] Now takes an input u8 instead of an input u32.

Mode must be 0 or 1.

Sends command message 0x32 to the state machine.

The state machine then handles this by issuing the WLC_SET_VAR ioctl for the "pm2_sleep_ret_ext" variable. Mode is used to select between 2 sets of hardcoded parameters as follows:

 struct wl_pm2_sleep_ret_ext {
   u8 logic;
   u8 PAD;
   u16 low_ms;
   u16 high_ms;
   u16 rx_pkts_threshold;
   u16 tx_pkts_threshold;
   u16 txrx_pkts_threshold;
   u32 rx_bytes_threshold;
   u32 tx_bytes_threshold;
   u32 txrx_bytes_threshold;
 };
 
 wl_pm2_sleep_ret_ext args = {0};
 
 if (mode == 0) {
   args.logic = 2;
   args.low_ms = 2000;
   args.high_ms = 5000;
   args.rx_pkts_threshold = 10;
 } else if (mode == 1) {
   args.logic = 2;
   args.low_ms = 200;
   args.high_ms = 800;
   args.rx_pkts_threshold = 10;
 }

Afterwards, the WLC_SET_PM ioctl is issued with the argument value 2 (PM2).

This is used by nifm.

wlan:lcl

This is "nn::wlan::detail::ILocalManager".

This service no longer exists in [15.0.0+].

Cmd Name
0 [9.0.0+] OpenMode ([1.0.0-8.1.0] OpenMasterMode)
1 [9.0.0+] CloseMode ([1.0.0-8.1.0] CloseMasterMode)
2 [9.0.0+] GetMacAddress ([1.0.0-8.1.0] OpenClientMode)
3 [9.0.0+] CreateBss ([1.0.0-8.1.0] CloseClientMode)
4 [9.0.0+] DestroyBss ([1.0.0-8.1.0] OpenSpectatorMode)
5 [9.0.0+] StartScan ([1.0.0-8.1.0] CloseSpectatorMode)
6 [9.0.0+] StopScan ([1.0.0-8.1.0] GetMacAddress)
7 [9.0.0+] Connect ([1.0.0-8.1.0] CreateBss)
8 [9.0.0+] CancelConnect ([1.0.0-8.1.0] DestroyBss)
9 [9.0.0+] Join ([1.0.0-8.1.0] StartScan)
10 [9.0.0+] CancelJoin ([1.0.0-8.1.0] StopScan)
11 [9.0.0+] Disconnect ([1.0.0-8.1.0] Connect)
12 [9.0.0+] SetBeaconLostCount ([1.0.0-8.1.0] CancelConnect)
13 [9.0.0+] GetSystemEvent ([1.0.0-8.1.0] Join)
14 [9.0.0+] GetConnectionStatus ([1.0.0-8.1.0] CancelJoin)
15 [9.0.0+] GetClientStatus ([1.0.0-8.1.0] Disconnect)
16 [9.0.0+] GetBssIndicationEvent ([1.0.0-8.1.0] SetBeaconLostCount)
17 [9.0.0+] GetBssIndicationInfo ([1.0.0-8.1.0] GetSystemEvent)
18 [9.0.0+] GetState ([1.0.0-8.1.0] GetConnectionStatus)
19 [9.0.0+] GetAllowedChannels ([1.0.0-8.1.0] GetClientStatus)
20 [9.0.0+] AddIe ([1.0.0-8.1.0] GetBssIndicationEvent)
21 [9.0.0+] DeleteIe ([1.0.0-8.1.0] GetBssIndicationInfo)
22 [9.0.0+] PutFrameRaw ([1.0.0-8.1.0] GetState)
23 [9.0.0+] CancelGetFrame ([1.0.0-8.1.0] GetAllowedChannels)
24 [9.0.0+] CreateRxEntry ([1.0.0-8.1.0] AddIe)
25 [9.0.0+] DeleteRxEntry ([1.0.0-8.1.0] DeleteIe)
26 [9.0.0+] AddEthertypeToRxEntry ([1.0.0-8.1.0] PutFrameRaw)
27 [9.0.0+] DeleteEthertypeFromRxEntry ([1.0.0-8.1.0] CancelGetFrame)
28 [9.0.0+] AddMatchingDataToRxEntry ([1.0.0-8.1.0] CreateRxEntry)
29 [9.0.0+] RemoveMatchingDataFromRxEntry ([1.0.0-8.1.0] DeleteRxEntry)
30 [9.0.0+] GetScanResult ([1.0.0-8.1.0] AddEthertypeToRxEntry)
31 [9.0.0+] PutActionFrameOneShot ([1.0.0-8.1.0] DeleteEthertypeFromRxEntry)
32 [9.0.0+] SetActionFrameWithBeacon ([1.0.0-8.1.0] AddMatchingDataToRxEntry)
33 [9.0.0+] CancelActionFrameWithBeacon ([1.0.0-8.1.0] RemoveMatchingDataFromRxEntry)
34 [9.0.0+] CreateRxEntryForActionFrame ([1.0.0-8.1.0] GetScanResult)
35 [9.0.0+] DeleteRxEntryForActionFrame ([1.0.0-8.1.0] PutActionFrameOneShot)
36 [9.0.0+] AddSubtypeToRxEntryForActionFrame ([1.0.0-8.1.0] SetActionFrameWithBeacon)
37 [9.0.0+] DeleteSubtypeFromRxEntryForActionFrame ([1.0.0-8.1.0] CancelActionFrameWithBeacon)
38 [9.0.0+] CancelGetActionFrame ([1.0.0-8.1.0] CreateRxEntryForActionFrame)
39 [9.0.0+] GetRssi ([1.0.0-8.1.0] DeleteRxEntryForActionFrame)
40 [9.0.0+] SetMaxAssociationNumber ([1.0.0-8.1.0] AddSubtypeToRxEntryForActionFrame)
41 [9.0.0+] ([1.0.0-8.1.0] DeleteSubtypeFromRxEntryForActionFrame)
42 [9.0.0+] ([1.0.0-8.1.0] CancelGetActionFrame)
43 [9.0.0+] ([1.0.0-8.1.0] GetRssi)
44 [9.0.0+] ([1.0.0-8.1.0] SetMaxAssociationNumber)
45 [9.0.0+] ([4.0.0-8.1.0])
46 [9.0.0+] ([4.0.0-8.1.0])
47 [9.0.0+] ([4.0.0-8.1.0])
48 [10.0.0+] ([4.0.0-8.1.0])
49 [13.0.0+] ([6.0.0-8.1.0])
50 [13.0.0+] ([6.0.0-8.1.0])
51 [13.0.0+] ([8.0.0-8.1.0])
52 ([8.0.0-8.1.0])

[5.0.0+] GetAllowedChannels now returns a total of 4-bytes of output instead of 0x50, and now takes a type-0xA output buffer.

[10.0.0+] Cmd46 now takes a total of 1-byte of input instead of 6-bytes, while cmd47 now takes a total of 6-bytes of input instead of 1-byte.

OpenMasterMode

No input/output.

Sends command message 0x7 to the state machine.

CloseMasterMode

No input/output.

Sends command message 0x5 to the state machine.

OpenClientMode

No input/output.

Sends command message 0x8 to the state machine.

CloseClientMode

No input/output.

Sends command message 0x5 to the state machine.

OpenSpectatorMode

No input/output.

Sends command message 0x9 to the state machine.

CloseSpectatorMode

No input/output.

Sends command message 0x5 to the state machine.

OpenMode

Takes an input u32 Mode. No output.

CloseMode

Takes an input u32 Mode. No output.

GetMacAddress

No input. Returns an output #MacAddress.

Sends command message 0x18 (GetMacAddress) to the state machine.

CreateBss

Takes an input #Bss. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown) and 0x1E (CreateAp) to the state machine.

DestroyBss

No input/output.

Sends command message 0x1F (DestroyAp) to the state machine.

StartScan

Takes a type-0x15 input buffer buffer containing a #ScanRequest. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown) and 0x14 (ScanRequest) to the state machine.

StopScan

No input/output.

Sends command message 0x16 (CancelScan) to the state machine.

Connect

Takes an input #ConnectParam. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown), 0x11 (SetBeaconLostTimeout), 0xF (SetStaticAesMode) and 0x20 (JoinNetworkSta) to the state machine.

CancelConnect

No input/output.

Sends command message 0x23 (CancelJoinNetwork) to the state machine.

Join

Takes an input #ConnectParam. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown), 0x11 (SetBeaconLostTimeout), 0xF (SetStaticAesMode) and 0x22 (JoinNetworkSpectator) to the state machine.

CancelJoin

No input/output.

Sends command message 0x23 (CancelJoinNetwork) to the state machine.

Disconnect

Takes an input u32 Argument and an input #MacAddress. No output.

Sends command message 0x25 (DeauthRequest) to the state machine.

SetBeaconLostCount

Takes an input u32 BeaconLostCount. No output.

GetSystemEvent

Takes an input u32 SystemEventType. Returns an output Event handle.

GetConnectionStatus

No input. Returns an output #ConnectionStatus.

Sends command message 0x80 (GetState) to the state machine, to check current state. Then this copies data from state to output (unrelated to message 0x80).

GetClientStatus

Takes a type-0x16 output buffer containing a #ClientStatus. No output.

Sends command message 0x80 (GetState) to the state machine, to check current state.

GetBssIndicationEvent

No input. Returns an output Event handle.

GetBssIndicationInfo

Takes a type-0x16 output buffer. No output.

GetState

No input. Returns an output #State.

Sends command message 0x80 (GetState) to the state machine.

GetAllowedChannels

Takes a type-0xA output buffer. Returns an output u32 AllowedChannelsCount.

AddIe

Takes a type-0x5 input buffer and an input u32 ManagementFrameType. Returns an output u32 Ie.

Sends command message 0x28 (AddIe) to the state machine.

DeleteIe

Takes an input u32 Ie. No output.

Sends command message 0x29 (DeleteIe) to the state machine.

PutFrameRaw

Takes a type-0x5 input buffer. No output.

Sends command message 0x80 (GetState) to the state machine, to check current state.

CancelGetFrame

Takes an input u32 RxId. No output.

Sends command message 0x80 (GetState) to the state machine, to check current state.

CreateRxEntry

Takes a type-0x9 input buffer and an input u32 Capacity. Returns an output u32 RxId.

DeleteRxEntry

Takes an input u32 RxId. No output.

AddEthertypeToRxEntry

Takes an input u32 RxId and an input u32 Protocol. No output.

DeleteEthertypeFromRxEntry

Takes an input u16 Protocol. Returns an output u32.

AddMatchingDataToRxEntry

Takes a type-0x19 input buffer and an input u32 RxId. No output.

[15.0.0+] Now takes a total of 0x1C-bytes of input.

Sends command message 0x2A (AddMatchingDataInfoToRxEntry) to the state machine.

RemoveMatchingDataFromRxEntry

Takes a type-0x19 input buffer and an input u32 RxId. No output.

[15.0.0+] Now takes a total of 0x1C-bytes of input.

Sends command message 0x2B (RemoveMatchingDataFromRxEntry) to the state machine.

GetScanResult

Takes a type-0x19 input buffer and a type-0x6 output buffer containing a #ScanResult. No output.

Sends command message 0x15 (BssInfoListGet) to the state machine.

PutActionFrameOneShot

Takes a type-0x5 input buffer, an input #MacAddress and two u32s Channel and DwellTime. No output.

Sends command message 0xA (SetWlanInterfaceUpDown) to the state machine.

SetActionFrameWithBeacon

Takes a type-0x5 input buffer. No output.

[15.0.0+] Now takes a type-0x21 input buffer instead of a type-0x5 input buffer.

Sends command message 0x2C (SetActionFrameWithBeacon) to the state machine.

CancelActionFrameWithBeacon

No input/output.

Sends command message 0x2D (CancelActionFrameWithBeacon) to the state machine.

CreateRxEntryForActionFrame

Takes a type-0x9 input buffer and an input u32 Capacity. Returns an output u32 RxId.

DeleteRxEntryForActionFrame

Takes an input u32 RxId. No output.

AddSubtypeToRxEntryForActionFrame

Takes an input u32 RxId and an input u32 Subtype. No output.

DeleteSubtypeFromRxEntryForActionFrame

Takes an input u32 Subtype. Returns an output u32.

CancelGetActionFrame

Takes an input u32 RxId. No output.

Sends command message 0x80 (GetState) to the state machine, to check current state.

GetRssi

No input. Returns an output u32 Rssi.

Sends command message 0x2E (GetRssi) to the state machine.

SetMaxAssociationNumber

Takes an input u32 MaxAssociationNumber. No output.

Sends command message 0x31 (SetMaxAssociationNumber) to the state machine.

wlan:lg

This is "nn::wlan::detail::ILocalGetFrame".

This service no longer exists in [15.0.0+].

Cmd Name
0 GetFrameRaw

GetFrameRaw

Takes a type-0x6 output buffer and an input u32 RxId. Returns an output u32 FrameSize.

Sends command message 0x80 (GetState) to the state machine, to check current state.

wlan:lga

This is "nn::wlan::detail::ILocalGetActionFrame".

This service no longer exists in [15.0.0+].

Cmd Name
0 GetActionFrame

GetActionFrame

Takes a type-0x6 output buffer and an input u32 RxId. Returns an output #MacAddress and an output u32 ActionFrame.

[5.0.0+] Now takes another input u32 and returns another output u32.

wlan:sg

This is "nn::wlan::detail::ISocketGetFrame".

This service no longer exists in [15.0.0+].

Cmd Name
0 GetFrameRaw

GetFrameRaw

Takes a type-0x6 output buffer and an input u32 RxId. Returns an output u32 FrameSize.

wlan:soc

This is "nn::wlan::detail::ISocketManager".

This service no longer exists in [15.0.0+].

Cmd Name
0 PutFrameRaw
1 CancelGetFrame
2 CreateRxEntry
3 DeleteRxEntry
4 AddEthertypeToRxEntry
5 DeleteEthertypeFromRxEntry
6 GetMacAddress
7 SwitchTsfTimerFunction
8 GetDeltaTimeBetweenSystemAndTsf
9 RegisterSharedMemory
10 UnregisterSharedMemory
11 EnableSharedMemory
12 [6.0.0+] SetMulticastList

PutFrameRaw

Takes a type-0x5 input buffer. No output.

Sends command message 0x80 (GetState) to the state machine, to check current state.

CancelGetFrame

Takes an input u32 RxId. No output.

Sends command message 0x80 (GetState) to the state machine, to check current state.

CreateRxEntry

Takes a type-0x9 input buffer and an input u32 Capacity. Returns an output u32 RxId.

DeleteRxEntry

Takes an input u32 RxId. No output.

AddEthertypeToRxEntry

Takes an input u32 RxId and an input u32 Protocol. No output.

DeleteEthertypeFromRxEntry

Takes an input u16 Protocol. Returns an output u32.

GetMacAddress

No input. Returns an output #MacAddress.

Sends command message 0x18 (GetMacAddress) to the state machine.

SwitchTsfTimerFunction

Takes an input bool. No output.

Sends command message 0x2F (SetTsfTimerEventmask) to the state machine.

GetDeltaTimeBetweenSystemAndTsf

No input. Returns an u64 DeltaTimeBetweenSystemAndTsf.

RegisterSharedMemory

Takes an input SharedMemory handle, an u32 SharedMemorySize and four input Event handles RxPacketEventHandle, TxPacketEventHandle, RxCbufEventHandle and TxCbufEventHandle. No output.

[15.0.0+] Stubbed. Returns 0.

UnregisterSharedMemory

No input/output.

[15.0.0+] Stubbed. Returns 0.

EnableSharedMemory

No input/output.

[15.0.0+] Stubbed. Returns 0.

SetMulticastList

Unofficial name.

Takes an input #MulticastList. No output.

wlan:dtc

This is "nn::wlan::detail::IDetectManager".

This was added with [6.0.0+].

This service no longer exists in [15.0.0+].

Cmd Name
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

[7.0.0+] Cmd14 now takes an input u8.

wlan

This is "nn::wlan::detail::IGeneralServiceCreator".

This was added with [15.0.0+].

Cmd Name
0 #CreateWirelessCommunicationService

CreateWirelessCommunicationService

Unofficial name.

No input. Returns an #IWirelessCommunicationService.

IWirelessCommunicationService

This is "nn::wlan::detail::IWirelessCommunicationService".

This was added with [15.0.0+].

Cmd Name
0
1
10
11
12
13
14
20
21
30
31
32
33 GetMacAddress
40
41
42
43 CreateRxEntry
44 DeleteRxEntry
45 AddEthertypeToRxEntry
46 DeleteEthertypeFromRxEntry
47 AddMatchingDataToRxEntry
48 RemoveMatchingDataFromRxEntry
50 AddIe
51 DeleteIe
60 StartScan
61 StopScan
62 GetBssIndicationEvent
63 GetScanResult
70 RegisterSharedMemory
71 UnregisterSharedMemory
72 EnableSharedMemory
80
81
90
91
92
93
94
95 SetActionFrameWithBeacon
96 CancelActionFrameWithBeacon
97 SetMaxAssociationNumber
98
100
101
102
103
104
105
106
107 SetMulticastList
108 SetDfrts
110
111
112
113

wlan:p

This is "nn::wlan::detail::IPrivateServiceCreator".

This was added with [15.0.0+].

Cmd Name
0 #CreateWirelessCommunicationService
1 #CreatePrivateWirelessCommunicationService

CreatePrivateWirelessCommunicationService

Unofficial name.

No input. Returns an #IPrivateWirelessCommunicationService.

IPrivateWirelessCommunicationService

This is "nn::wlan::detail::IPrivateWirelessCommunicationService".

This was added with [15.0.0+].

Cmd Name
0 GetFwVersion
1 ChangeRxAntenna
2
3
4
5
6
7
8
9
10
11
12
13 SwitchTsfTimerFunctionOn
14 SwitchTsfTimerFunctionOff
15 GetDeltaTimeBetweenSystemAndTsf
16
17
18
19
20
21
22

wlan:nd

This is "nn::anif::detail::ISfDriverServiceCreator".

This was added with [15.0.0+].

Cmd Name
0 #CreateDriverService

CreateDriverService

Unofficial name.

No input. Returns an #ISfDriverService.

ISfDriverService

This is "nn::anif::detail::ISfDriverService".

This was added with [15.0.0+].

Cmd Name
0 #CreateNetworkInterfaceService
128
129
130
131
384
385
386
387
388
389

CreateNetworkInterfaceService

Unofficial name.

Takes a type-0x21 input buffer. Returns an #ISfNetworkInterfaceService.

ISfNetworkInterfaceService

This is "nn::anif::detail::ISfNetworkInterfaceService".

This was added with [15.0.0+].

Cmd Name
0
1
2
3
4
5
6
128
129
130
131
256
257
258
259
260
261
262
384
385
386
387
388
389

Ssid

This is "nn::wlan::Ssid". This is a 0x22-byte struct.

Offset Size Description
0x0 0x1 Length
0x1 0x20 Ssid
0x21 0x1 Reserved

MacAddress

This is a 0x6-byte struct with 1-byte alignment.

ConnectParam

This is a 0x80-byte struct.

Offset Size Description
0x0 0x22 Ssid
0x22 0x6 Bssid
0x28 0x1
0x29 0x1 Reserved
0x2A 0x2 Channel
0x2C 0x4 PrivacyMode
0x30 0x4 GroupPrivacyMode
0x34 0x4 KeyIdx
0x38 0x40 SecurityKey
0x78 0x4 Reserved
0x7C 0x4 BeaconLostTimeout

ConnectionStatus

This is a 0x3C-byte struct.

Offset Size Description
0x0 0x4 ConnectionState
0x4 0x4
0x8 0x2 Channel
0xA 0x6 Bssid
0x10 0x22 Ssid
0x32 0x2
0x34 0x2
0x36 0x2
0x38 0x2
0x3A 0x2 Reserved

ClientStatus

This is a 0xE4-byte struct.

ScanRequest

This is a 0x1B8-byte struct.

Offset Size Description
0x0 0x4 ScanType
0x4 0x2 * 38
0x50 0x1
0x51 0x3 Reserved
0x54 0x4 ChannelScanTime
0x58 0x4 HomeChannelTime
0x5C 0x22 * 10 Array of Ssid
0x1B0 0x1 SsidCount
0x1B1 0x6 Bssid
0x1B7 0x1 Reserved

ScanResult

Offset Size Description
0x0 0x4 ScanBufferCapacity
0x4 0x4 BssInfoSize
0x8 0x4 BssInfoCount
0xC Variable Array of #BssInfo

Bss

This is a 0x80-byte struct.

[4.0.0+] This is a 0x84-byte struct.

BssInfo

This is a 0x58-byte struct.

ConnectionState

This is "nn::wlan::ConnectionState".

Value Description
0 None
1 Idle
2 Connected
3 Scanning
4 Connecting
5 CancelingScan
6 Disconnecting

State

Value Description
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

WpsPin

This is a 0x8-byte string.

MulticastList

This is a 0x31-byte struct.

Offset Size Description
0x0 0x1 Count
0x1 0x30 Array of #MacAddress

WakeUpStats

This is a 0x20-byte struct.

This is updated during RequestWakeUp. The fields starting with offset +0x4 are updated when handling wowl, which counter is updated depends on the value of iovar "tcpka_wake_cause".

Offset Size Description
0x0 0x4 Number of normal non-wowl wakeups. Also incremented during wowl handling if the output from the func using "tcpka_wake_cause" is 0.
0x4 0x4
0x8 0x4
0xC 0x4
0x10 0x4
0x14 0x4
0x18 0x4
0x1C 0x4 Number of wowl wakeups where the cause is unrecognized.

SleepStats

This is a 0x38-byte struct.

During RequestWakeUp when handling wowl, this data in state is updated by adding each field with the corresponding field from iovar "sleep_stats_get".

Offset Size Description
0x0 0x4
0x4 0x4
0x8 0x4
0xC 0x4
0x10 0x4
0x14 0x4
0x18 0x4
0x1C 0x4
0x20 0x4
0x24 0x4
0x28 0x4
0x2C 0x4
0x30 0x4
0x34 0x4

FwVersion

This is a 0x100-byte string.

System Version Firmware String
[1.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-aoe Version: 7.35.252.58 CRC: f592f3bf Date: Tue 2016-10-04 23:54:54 PDT Ucode Ver: 1020.221 FWID: 01-5ec2fbfd
[2.0.0-2.2.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe Version: 7.35.64.1 CRC: 301f7804 Date: Fri 2017-02-17 01:03:01 PST Ucode Ver: 1020.223 FWID: 01-82d1f902
[3.0.0-3.0.2] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.70 CRC: f3b554fd Date: Thu 2017-05-04 19:04:04 PDT Ucode Ver: 1020.223 FWID: 01-5d27fda5
[4.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.75 (r666384) CRC: 58f59a6f Date: Wed 2017-08-16 22:27:11 PDT Ucode Ver: 1020.223
[5.0.0-5.1.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.78.1.1 (r683984) CRC: 6a10caf9 Date: Wed 2018-02-21 21:43:01 PST Ucode Ver: 1020.223 FWID 01-ae4e196d
[6.0.0-6.2.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.84 (r692035) CRC: 937bcfc9 Date: Tue 2018-06-19 19:36:54 PDT Ucode Ver: 1020.225 FWID 01-71fd007e
[7.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.87 (r708450) CRC: 5f41af12 Date: Thu 2018-10-25 19:11:47 PDT Ucode Ver: 1020.226 FWID 01-377c0939
[8.0.0-8.1.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.90 (r711053) CRC: 30dcf8a5 Date: Thu 2019-02-28 18:12:24 PST Ucode Ver: 1020.226 FWID 01-e691490c
[9.0.0-9.1.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.93 (r717555) CRC: d8363dad Date: Mon 2019-07-01 23:43:14 PDT Ucode Ver: 1020.228 FWID 01-c90a462
[10.0.0-10.1.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.96 (r723441) CRC: f6823c05 Date: Tue 2019-11-19 22:31:29 PST Ucode Ver: 1020.228 FWID 01-a1b7e0a4
[11.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.99 (r725630) CRC: 320007b0 Date: Mon 2020-05-25 19:51:18 PDT Ucode Ver: 1020.228 FWID 01-822b442d
[12.0.0-13.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.104 (r728022) CRC: f0b454ec Date: Wed 2021-02-24 04:39:25 PST Ucode Ver: 1020.228 FWID 01-fbba058
[14.0.0-15.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.108 (c216b7c) CRC: 1be69227 Date: Sun 2021-08-29 19:24:39 PDT Ucode Ver: 1020.228 FWID 01-65333037
  • [2.0.0+] Besides the version update, added "gtkoe" to the string.
  • [3.0.0+] Besides the version update, added "tcpkaoe" to the string.
  • [6.0.0+] Besides the version update, added "clm_4356a3_ntd" to the string.
  • [7.0.0+] Besides the version update, added "noclminc" to the string.

Notes

Originally wlan-sysmodule had a func called from nnMain which (among other things) handled configuring GPIO WifiReset (uses commands SetDirection and SetValue with input value 1), when not disabled by a system-setting. This GPIO functionality was removed from wlan with [7.0.0+], it was redundant since pcie already had code handling that GPIO as well.