2,787
edits
Changes
no edit summary
USB provides services for interacting with the USB stack.
= Configuration =
The following is the default USB config strings, while the usbds service isn't being used. All of the below configuration will reset to the defaults when all usbds-related sessions are closed. These can be set with [[#SetVidPidBcd]]. The default string for Product is loaded from [[Settings_services|settings]] config. The default is referred to by usb-sysmodule as "Dummy".
The following is the default USB config strings, while the usbds service isn't being used. All of the below configuration will reset to the defaults when all usbds-related sessions are closed. These can be set with [[#SetVidPidBcd]]. The default string for Product is loaded from [[Settings_services|settings]] config. The default is referred to by usb-sysmodule as "Dummy".
Product: Nintendo Switch
Product: Nintendo Switch
The following is the default <code>lsusb -v {...}</code> output when the usbds service wasn't used.
The following is the default <code>lsusb -v {...}</code> output when the usbds service wasn't used.
pre-5.0.0: The endpoints are configured using [[#GetDsEndpoint]], the total number of endpoints is the number of open [[#IDsEndpoint]] sessions. bInterfaceNumber is {0-based index for the enabled [[#IDsInterface]] session.} Some of the interface fields are configured using [[#GetDsInterface]].
pre-5.0.0: The endpoints are configured using [[#RegisterEndpoint]], the total number of endpoints is the number of open [[#IDsEndpoint]] sessions. bInterfaceNumber is {0-based index for the enabled [[#IDsInterface]] session.} Some of the interface fields are configured using [[#RegisterInterface]].
When usbds is in use where [[#SetVidPidBcd]] wasn't used, the VID/PID is 057e:3000.
When usbds is in use where [[#SetVidPidBcd]] wasn't used, the VID/PID is 057e:3000.
bInterval 16
bInterval 16
== BindDevice ==
= usb:ds =
[1.0.0-10.2.0] This is "nn::usb::ds::IDsService".
[11.0.0+] This is "nn::usb::ds::IDsRootSession".
This service is used during [[Factory Setup|factory setup]] by [[Manu Services|manu]]. This is also used by [[Capmtp_services|capmtp]].
This service session is used as an IPC [[IPC_Marshalling|domain]] by [[Manu Services|manu]].
This service can be used by multiple processes at the same time, with separate interfaces. However, if one process does usbds shutdown, usbds will reset to defaults even if there's a process still using it.
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Offset || Size || Description
! Cmd || Name
|-
|-
| 0x8 || 0x1 || iInterface. Ignored.
| 0 || [[#CreateDsService]]
|}
|}
== CreateDsService ==
No input. Returns an [[#IDsService]].
== GetStateChangeEvent ==
== IDsService ==
This is "nn::usb::ds::IDsService".
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name || Description
! Cmd || Name
|-
|-
| 0 || Detached || Device is not attached to USB.
| 0 || [[#Initialize]]
|-
|-
| 1 || Attached || Device is attached, but is not powered.
| 1 || [11.0.0+] [[#RegisterInterface]] ([1.0.0-10.2.0] [[#BindClientProcess]]))
|-
|-
| 2 || Powered || Device is attached and powered, but has not been reset.
| 2 || [11.0.0+] [[#GetStateChangeEvent]] ([1.0.0-10.2.0] [[#RegisterInterface]])
|-
|-
| 3 || Default || Device is attached, powered, and has been reset, but does not have an address.
| 3 || [11.0.0+] [[#GetState]] ([1.0.0-10.2.0] [[#GetStateChangeEvent]])
|-
|-
| 4 || Address || Device is attached, powered, has been reset, has an address, but is not configured.
| 4 || [11.0.0+] ClearDeviceData ([1.0.0-10.2.0] [[#GetState]])
|-
|-
| 5 || Configured || Device is attached, powered, has been reset, has an address, configured, and may be used.
| 5 || [11.0.0+] AddUsbStringDescriptor ([5.0.0-10.2.0] ClearDeviceData, [2.0.0-4.1.0] [[#SetVidPidBcd]])
|-
|-
| 6 || Suspended || Device is attached and powered, but has not seen bus activity for 3ms. Device is suspended and cannot be used.
| 6 || [11.0.0+] DeleteUsbStringDescriptor ([5.0.0-10.2.0] AddUsbStringDescriptor)
|-
|-
|}
| 7 || [11.0.0+] SetUsbDeviceDescriptor ([5.0.0-10.2.0] DeleteUsbStringDescriptor)
|-
|-
| 8 || [11.0.0+] SetBinaryObjectStore ([5.0.0-10.2.0] SetUsbDeviceDescriptor)
|-
|-
| 0x0 || 0x2 || VID (idVendor)
| 9 || [11.0.0+] EnableDevice ([5.0.0-10.2.0] SetBinaryObjectStore)
|-
|-
| 0x2 || 0x2 || PID (idProduct)
| 10 || [11.0.0+] DisableDevice ([5.0.0-10.2.0] EnableDevice)
|-
|-
| 0x4 || 0x2 || bcdDevice
| 11 || [11.0.0+] [[#GetSpeed]] ([5.0.0-10.2.0] DisableDevice)
|-
|-
| 0x6 || 0x20 || Manufacturer
| 12 || [8.0.0-10.2.0] [[#GetSpeed]]
|}
|}
== Initialize ==
Takes an input u32 '''ComplexId'''. No output.
[11.0.0+] Now takes an additional input Process handle.
[[Manu_Services|Manu]] uses '''ComplexId''' 0x02.
Binding more than once with the current session is not allowed. Once this command is used, the USB device will not be listed with <code>lsusb</code> until [[#EnableInterface]] is used.
Returns a not-found error when '''ComplexId''' isn't 0x02, for values 0x0-0x4 at least.
== BindClientProcess ==
Takes an input Process handle. No output.
== RegisterInterface ==
Takes two type-0x5 input buffers containing an [[#UsbInterfaceDescriptor]] and an [[#UsbStringDescriptor]], respectively. Returns an output u8 '''InterfaceNumber''' and an [[#IDsInterface]].
[5.0.0+] This now only takes an input u8 and returns an [[#IDsInterface]].
[[Manu_Services|Manu]] sends a 0x09-byte descriptor (e.g.: 0x09, 0x04, 0x04, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00) in the first buffer and a string ("usb") in the second buffer.
When the strlen output for the second buffer is >=0x40, size 0x40 is used instead for copying the string. This is the interface name, it's not sent over USB.
Returns an error when [[#Initialize]] wasn't used.
== Cmd12 ==
Up to 4 interfaces can be used and [[#EnableInterface|enabled]].
No input. Returns an output u32.
== GetStateChangeEvent ==
No input. Returns an output Event handle.
Signalled when Switch<->host USB comms change between started/stopped. USB cable connected/disconnected while at least 1 interface was enabled, or interface enabled/disabled while the USB cable was connected which then caused USB-comms state to change.
== GetState ==
No input. Returns an output [[#UsbState]].
Returns an error when [[#Initialize]] wasn't used.
== SetVidPidBcd ==
Takes a type-0x5 input buffer containing an [[#UsbVidPidBcd]]. No output.
== GetSpeed ==
No input. Returns an output [[#UsbDeviceSpeed]].
== IDsInterface ==
== IDsInterface ==
This is "nn::usb::ds::IDsInterface".
This is "nn::usb::ds::IDsInterface".
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || [[#GetDsEndpoint]]
| 0 || [[#RegisterEndpoint]]
|-
|-
| 1 || [[#GetSetupEvent]]
| 1 || [[#GetSetupEvent]]
|-
|-
| 2 ||
| 2 || [[#GetSetupPacket]]
|-
|-
| 3 || [[#EnableInterface]]
| 3 || [11.0.0+] [[#CtrlInAsync]] ([1.0.0-10.2.0] [[#Enable]])
|-
|-
| 4 || [[#DisableInterface]]
| 4 || [11.0.0+] [[#CtrlOutAsync]] ([1.0.0-10.2.0] [[#Disable]])
|-
|-
| 5 || [[#CtrlInPostBufferAsync]]
| 5 || [11.0.0+] [[#GetCtrlInCompletionEvent]] ([1.0.0-10.2.0] [[#CtrlInAsync]])
|-
|-
| 6 || [[#CtrlOutPostBufferAsync]]
| 6 || [11.0.0+] [[#GetCtrlInUrbReport]] ([1.0.0-10.2.0] [[#CtrlOutAsync]])
|-
|-
| 7 || [[#GetCtrlInCompletionEvent]]
| 7 || [11.0.0+] [[#GetCtrlOutCompletionEvent]] ([1.0.0-10.2.0] [[#GetCtrlInCompletionEvent]])
|-
|-
| 8 || [[#GetCtrlInReportData]]
| 8 || [11.0.0+] [[#GetCtrlOutUrbReport]] ([1.0.0-10.2.0] [[#GetCtrlInUrbReport]])
|-
|-
| 9 || [[#GetCtrlOutCompletionEvent]]
| 9 || [11.0.0+] [[#CtrlStall]] ([1.0.0-10.2.0] [[#GetCtrlOutCompletionEvent]])
|-
|-
| 10 || [[#GetCtrlOutReportData]]
| 10 || [11.0.0+] [[#AppendConfigurationData]] ([1.0.0-10.2.0] [[#GetCtrlOutUrbReport]])
|-
|-
| 11 || [[#StallCtrl]]
| 11 || [13.0.0+] [[#SetGuid]] ([1.0.0-10.2.0] [[#CtrlStall]])
|-
|-
| 12 || [5.0.0+] AppendConfigurationData
| 12 || [15.0.0+] [[#RegisterTransferMemory]] ([5.0.0-10.2.0] [[#AppendConfigurationData]])
|}
|}
=== RegisterEndpoint ===
Takes a type-0x5 input buffer containing an [[#UsbEndpointDescriptor]]. Returns an output u8 '''EndpointNumber''' and an [[#IDsEndpoint]].
[5.0.0+] This now only takes an input u8 and returns an [[#IDsEndpoint]].
[[Manu_Services|Manu]] uses this twice for getting two endpoint sessions, with the following 0x7-byte buffer data:
* First endpoint: 0x07, 0x05, 0x80, 0x02, 0x00, 0x02, 0x00
* First endpoint: 0x07, 0x05, 0x80, 0x02, 0x00, 0x02, 0x00
** bLength=0x7
** bLength=0x7
** bInterval=0
** bInterval=0
* Second endpoint: Same as above except byte2 is 0x00(bEndpointAddress=LIBUSB_ENDPOINT_OUT).
* Second endpoint: Same as above except byte2 is 0x00(bEndpointAddress=LIBUSB_ENDPOINT_OUT).
The buffer size must be >=0x7. Only the first 0x7-bytes from the buffer are used.
The buffer size must be >=0x7. Only the first 0x7-bytes from the buffer are used.
From the Tegra datasheet: "The maximum packet size supported on any endpoint is 1024 bytes in high-speed mode, for both device and host modes."
From the Tegra datasheet: "The maximum packet size supported on any endpoint is 1024 bytes in high-speed mode, for both device and host modes."
Throws an error if the interface is [[#EnableInterface|enabled]].
=== GetSetupEvent ===
=== GetSetupEvent ===
Returns an event handle. Unknown what triggers signalling, not signalled during interface-enable / device<>host USB-comms init.
No input. Returns an output Event handle.
Unknown what triggers signalling, not signalled during interface-enable / device<>host USB-comms init.
=== GetSetupPacket ===
Takes a type-0x6 output buffer. No output.
Memcpys data to outbuf with outsize, uses size 0x8 if outsize is too large.
Throws an error if the interface is not [[#EnableInterface|enabled]].
=== Cmd2 ===
=== Enable ===
No input/output.
Enables the current interface.
Only one interface can be enabled at a time per bInterfaceNumber. When bInterfaceNumber is auto-allocate(0x4) for [[#GetDsEndpoint]] this isn't an issue since the final bInterfaceNumber will be unique.
Only one interface can be enabled at a time per bInterfaceNumber. When bInterfaceNumber is auto-allocate(0x4) for [[#RegisterEndpoint]] this isn't an issue since the final bInterfaceNumber will be unique.
Once enabled, the device/interface can then actually be used over USB.
Once enabled, the device/interface can then actually be used over USB.
=== DisableInterface ===
=== Disable ===
No input/output.
Disables the current interface.
=== CtrlOutPostBufferAsync ===
=== CtrlInAsync ===
Same as [[#PostBufferAsync]](with same input/output), except this uses control output endpoint 0x00.
Same as [[#PostBufferAsync]], except this uses control input endpoint 0x80.
Throws an error if the interface is not [[#EnableInterface|enabled]].
=== CtrlOutAsync ===
Same as [[#PostBufferAsync]], except this uses control output endpoint 0x00.
Throws an error if the interface is not [[#EnableInterface|enabled]].
=== GetCtrlInCompletionEvent ===
=== GetCtrlInCompletionEvent ===
Same as [[#GetCompletionEvent]], except this uses control input endpoint 0x80.
=== GetCtrlInReportData ===
=== GetCtrlInUrbReport ===
Same as [[#GetReportData]](with same input/output), except this uses control input endpoint 0x80.
Same as [[#GetUrbReport]], except this uses control input endpoint 0x80.
=== GetCtrlOutCompletionEvent ===
=== GetCtrlOutCompletionEvent ===
Same as [[#GetCompletionEvent]], except this uses control output endpoint 0x00.
=== GetCtrlOutReportData ===
=== GetCtrlOutUrbReport ===
Same as [[#GetReportData]](with same input/output), except this uses control output endpoint 0x00.
Same as [[#GetUrbReport]], except this uses control output endpoint 0x00.
=== StallCtrl ===
=== CtrlStall ===
No input/output.
No input/output.
Calls a function with both control endpoints(0x80 and 0x00) with the same function. From strings: "m_pProtocol->Stall(0x80)" "m_pProtocol->Stall(0x00)".
Calls a function with both control endpoints (0x80 and 0x00) with the same function. From strings: "m_pProtocol->Stall(0x80)" "m_pProtocol->Stall(0x00)".
Throws an error if the interface is not [[#EnableInterface|enabled]].
=== AppendConfigurationData ===
Takes an input u32 '''InterfaceNumber''', an input [[#UsbDeviceSpeed]] and a type-0x5 input buffer. No output.
[5.0.0+] This now only takes an input [[#UsbDeviceSpeed]] and a type-0x5 input buffer.
=== SetGuid ===
Takes a type-0x5 input buffer. No output.
=== RegisterTransferMemory ===
Takes an input u64 and an input handle. No output.
Stubbed, just returns an error.
=== IDsEndpoint ===
=== IDsEndpoint ===
| 0 || [[#PostBufferAsync]]
| 0 || [[#PostBufferAsync]]
|-
|-
| 1 ||
| 1 || [[#Cancel]]
|-
|-
| 2 || [[#GetCompletionEvent]]
| 2 || [[#GetCompletionEvent]]
|-
|-
| 3 || [[#GetReportData]]
| 3 || [[#GetUrbReport]]
|-
|-
| 4 || [[#Stall]]
| 4 || [[#Stall]]
|-
|-
| 5 ||
| 5 || [[#SetZlt]]
|-
|-
| 6 || [7.0.0+]
| 6 || [7.0.0+] [[#IsStalled]]
|-
|-
| 7 || [7.0.0+]
| 7 || [7.0.0+] [[#GetStallClearedEvent]]
|-
|-
| 8 || [11.0.0+]
| 8 || [11.0.0-14.1.2]
|-
|-
| 9 || [11.0.0+]
| 9 || [11.0.0-14.1.2]
|}
|}
==== PostBufferAsync ====
Takes an input u32 '''Size''' and an input u64 '''Buffer'''. Returns an output u32 '''UrbId'''.
The output urbId can then be used while parsing the output of [[#GetUrbReport]], after waiting for the CompletionEvent to be signalled.
The buffer address must be 0x1000-byte aligned. The input size doesn't matter. It helps to use svcSetMemoryAttribute to turn off caching on the buffer.
The buffer address must be 0x1000-byte aligned. The input size doesn't matter. It helps to use svcSetMemoryAttribute to turn off caching on the buffer.
For receiving data, if size is less than {actual received USB packet size} the rest of the packet will be discarded. Later PostBufferAsync cmd(s) will only return data from new packets, not the remainder of the earlier packet(s).
For receiving data, if size is less than {actual received USB packet size} the rest of the packet will be discarded. Later PostBufferAsync cmd(s) will only return data from new packets, not the remainder of the earlier packet(s).
==== Cmd1 ====
==== Cancel ====
No input/output.
No input/output.
==== GetCompletionEvent ====
==== GetCompletionEvent ====
No input. Returns an output event handle for polling the completion of [[#PostBufferAsync]], even when it finished via [[#Stall]].
No input. Returns an output Event handle.
==== GetReportData ====
==== GetUrbReport ====
No input. Returns 0x84 bytes of report data from the endpoint. Seems to be eventually loaded from state, since this doesn't trigger any USB bus activity. All-zero before PostBufferAsync was used at least once.
No input. Returns an output [[#UrbReport]].
Seems to be eventually loaded from state, since this doesn't trigger any USB bus activity. All-zero before PostBufferAsync was used at least once.
==== Stall ====
==== Stall ====
No input/output.
No input/output.
Calls the same function used by [[#StallCtrl]], except this uses the endpoint associated with the current session.
Calls the same function used by [[#CtrlStall]], except this uses the endpoint associated with the current session.
Stops in-progress data-transfer done by [[#PostBufferAsync]].
Stops in-progress data-transfer done by [[#PostBufferAsync]].
==== Cmd5 ====
==== SetZlt ====
Takes an input u8, no output.
Takes an input bool. No output.
==== Cmd6 ====
==== IsStalled ====
No input, returns an output bool.
No input. Returns an output bool.
==== Cmd7 ====
==== GetStallClearedEvent ====
No input, returns an output handle.
No input. Returns an output Event handle.
==== Cmd8 ====
==== Cmd8 ====
Takes an input u64 and a handle, no output. Stubbed, just returns an error.
Takes an input u64 and an input handle. No output.
Stubbed, just returns an error.
==== Cmd9 ====
==== Cmd9 ====
Takes an input u32 size, an u64 offset, returns an u32 urbId. Stubbed, just returns an error.
Takes an input u32 '''Size''' and an input u64 '''Offset'''. Returns an u32 '''UrbId'''.
Stubbed, just returns an error.
= usb:hs, usb:hs:a =
= usb:hs, usb:hs:a =
! Cmd || Name
! Cmd || Name
|-
|-
| [2.0.0+] 0 || [[#BindClientProcess_2|#BindClientProcess]]
| 0 || [2.0.0+] [[#BindClientProcess_2|#BindClientProcess]] ([1.0.0] [[#QueryAllInterfaces]])
|-
|-
| 1 ([1.0.0] 0) || [[#QueryAllInterfaces]]
| 1 || [[#QueryAllInterfaces]] ([1.0.0] [[#QueryAvailableInterfaces]])
|-
|-
| 2 ([1.0.0] 1) || [[#QueryAvailableInterfaces]]
| 2 || [[#QueryAvailableInterfaces]] ([1.0.0] [[#QueryAcquiredInterfaces]])
|-
|-
| 3 ([1.0.0] 2) || [[#QueryAcquiredInterfaces]]
| 3 || [[#QueryAcquiredInterfaces]] ([1.0.0] [[#CreateInterfaceAvailableEvent]])
|-
|-
| 4 ([1.0.0] 3) || [[#CreateInterfaceAvailableEvent]]
| 4 || [[#CreateInterfaceAvailableEvent]] ([1.0.0] [[#DestroyInterfaceAvailableEvent]])
|-
|-
| 5 ([1.0.0] 4) || [[#DestroyInterfaceAvailableEvent]]
| 5 || [[#DestroyInterfaceAvailableEvent]] ([1.0.0] [[#GetInterfaceStateChangeEvent]])
|-
|-
| 6 ([1.0.0] 5) || [[#GetInterfaceStateChangeEvent]]
| 6 || [[#GetInterfaceStateChangeEvent]] ([1.0.0] [[#AcquireUsbIf]])
|-
|-
| 7 ([1.0.0] 6) || [[#AcquireUsbIf]]
| 7 || [[#AcquireUsbIf]] ([1.0.0] [[#GetDescriptorString]])
|-
|-
| 8 ([1.0.0] 7) || [6.0.0+] ([1.0.0] [[#GetDescriptorString]])
| 8 || [6.0.0+] SetTestMode ([1.0.0] [[#ResetDevice]])
|}
|}
== ResetDevice ==
== ResetDevice ==
Takes an input u32, no output. Stubbed, just returns 0.
== IClientIfSession ==
== IClientIfSession ==
| 3 || [[#GetAlternateInterface]]
| 3 || [[#GetAlternateInterface]]
|-
|-
| 4 ([1.0.0] 5) || [[#GetCurrentFrame]]
| 4 || [[#GetCurrentFrame]] ([1.0.0] [[#CtrlXferAsync]])
|-
|-
| [2.0.0+] 5 || [[#CtrlXferAsync]]
| 5 || [2.0.0+] [[#CtrlXferAsync]]
|-
|-
| 6 || ([1.0.0] [[#SubmitControlInRequest]])
| 6 || [[#GetCtrlXferCompletionEvent]] ([1.0.0] [[#SubmitControlInRequest]])
|-
|-
| 7 || [[#GetCtrlXferReport]] ([1.0.0] [[#SubmitControlOutRequest]])
| 7 || [[#GetCtrlXferReport]] ([1.0.0] [[#SubmitControlOutRequest]])
| 8 || [[#ResetDevice]]
| 8 || [[#ResetDevice]]
|-
|-
| 9 ([1.0.0] 4) || [[#OpenUsbEp]]
| 9 || [[#OpenUsbEp]] ([1.0.0] [[#GetCurrentFrame]])
|}
|}
Takes 2 input u8s ('''bmRequestType''' and '''bRequest'''), 3 input u16s ('''wValue''', '''wIndex''', and '''wLength'''), and an input u64 '''buffer''', no output.
Takes 2 input u8s ('''bmRequestType''' and '''bRequest'''), 3 input u16s ('''wValue''', '''wIndex''', and '''wLength'''), and an input u64 '''buffer''', no output.
=== Cmd6 ===
=== GetCtrlXferCompletionEvent ===
No input, returns an output handle. Signaled when [[#CtrlXferAsync]] finishes.
No input, returns an output handle. Signaled when [[#CtrlXferAsync]] finishes.
| 1 || [[#Close]] ([1.0.0] [[#SubmitInRequest]])
| 1 || [[#Close]] ([1.0.0] [[#SubmitInRequest]])
|-
|-
| 2 || GetCompletionEvent ([1.0.0] Reset)
| 2 || [[#GetCompletionEvent_2|GetCompletionEvent]] ([1.0.0] Reset)
|-
|-
| 3 || [[#PopulateRing]] ([1.0.0] [[#Close]])
| 3 || [[#PopulateRing]] ([1.0.0] [[#Close]])
|-
|-
| [2.0.0+] 4 || [[#PostBufferAsync_2|#PostBufferAsync]]
| 4 || [2.0.0+] [[#PostBufferAsync_2|#PostBufferAsync]]
|-
|-
| [2.0.0+] 5 || [[#GetXferReport]]
| 5 || [2.0.0+] [[#GetXferReport]]
|-
|-
| [2.0.0+] 6 || [[#BatchBufferAsync]]
| 6 || [2.0.0+] [[#BatchBufferAsync]]
|-
|-
| [4.0.0+] 7 || [[#CreateSmmuSpace]]
| 7 || [4.0.0+] [[#CreateSmmuSpace]]
|-
|-
| [4.0.0+] 8 || [[#ShareReportRing]]
| 8 || [4.0.0+] [[#ShareReportRing]]
|}
|}
No input/output.
No input/output.
Used by official sw prior to closing the endpoint session.
Used by official sw prior to closing the endpoint session. The func for this is also called automatically by the sysmodule during the IClientEpSession dtor.
==== Cmd2 ====
==== GetCompletionEvent ====
No input, returns an output handle. Signaled when [[#PostBufferAsync_2|#PostBufferAsync]] finishes. ([1.0.0] [[#Open]])
No input, returns an output handle. Signaled when [[#PostBufferAsync_2|#PostBufferAsync]] finishes. ([1.0.0] [[#Open]])
==== PostBufferAsync ====
==== PostBufferAsync ====
Takes an input u32 '''size''', an input u64 '''buffer''', and an input u64 '''unk''', returns an output u32 '''xferId'''.
Takes an input u32 '''size''', an input u64 '''buffer''', and an input u64 '''Id''', returns an output u32 '''xferId'''.
Starts a data transfer with a single urb.
The official sw func which uses this cmd and handles waiting on the Event passes value 0 for the '''Id'''. The async version which exposes this cmd directly uses '''Id''' from user input - the user funcs pass a value starting at 0 then increment it each time (for sending multiple requests at once, with 0 for the first request in this set of requests). Note that '''Id''' can be arbitrary, the sysmodule doesn't require a certain range for this.
On newer sysvers the state fields setup by [[#CreateSmmuSpace]] are compared with '''buffer'''. If it's within bounds of the SmmuSpace (which won't be the case when [[#CreateSmmuSpace]] wasn't used), it will then verify that buffer+buffer_size is within bounds throwing an error otherwise. Note that a buffer from [[#CreateSmmuSpace]] can't be reused by another endpoint with PostBufferAsync.
==== GetXferReport ====
==== GetXferReport ====
The buffer contains an array of [[#XferReport]].
The buffer contains an array of [[#XferReport]].
On newer sysvers this runs code which is the same as the user-process code handling the tmem from [[#ShareReportRing]]. This cmd can handle getting reports from that tmem as well, however normally user-processes would just access the tmem [[#ShareReportRing|directly]].
==== BatchBufferAsync ====
==== BatchBufferAsync ====
Takes 3 input u32s ('''urbCount''', '''unk1''', and '''unk2'''), an input u64 '''buffer''' and u64 '''Id''', and a type-0x5 ([3.0.0+] type-0x21) input buffer, returns an output u32 '''xferId'''.
Where '''Id''' is the same as [[#PostBufferAsync_2|#PostBufferAsync]].
Where '''unk''' is the same as [[#PostBufferAsync_2|#PostBufferAsync]].
This uses the same func internally as [[#PostBufferAsync_2|#PostBufferAsync]] except multiple urbs are specified by the user: the input buffer contains an array of u32s for the size of each urb, where '''urbCount''' is the total number of entries in this array. With [[#PostBufferAsync_2|#PostBufferAsync]] the last 2 params passed to the internal func are hard-coded to 0, while with this command it's '''unk1''' and '''unk2'''.
This uses the same func internally as [[#PostBufferAsync_2|#PostBufferAsync]] except multiple urbs are specified by the user: the input buffer contains an array of u32s for the size of each urb, where '''urbCount''' is the total number of entries in this array. With [[#PostBufferAsync_2|#PostBufferAsync]] the last 2 params passed to the internal func are hard-coded to 0, while with this command it's '''unk1''' and '''unk2'''.
==== CreateSmmuSpace ====
==== CreateSmmuSpace ====
Takes a total of 0x10-bytes of input, no output.
Takes an input u32 '''size''' and an u64 '''buffer''', no output.
This validates that both input params are page-aligned. Official user-processes also validate this.
This maps the specified buffer as devicemem and stores the fields for this in object state. If this was already used with this IClientEpSession object, an error is thrown.
==== ShareReportRing ====
==== ShareReportRing ====
Takes a total of 0x4-bytes of input and an input handle, no output.
Takes an input u32 '''size''' and an input TransferMemory handle, no output.
Official user-processes create the TransferMemory with permissions=RW. This validates that the input size is page-aligned, and this is also validated against data from state. Official user-processes also do this same validation.
When this was used, official user-processes read data from this TransferMemory buffer instead of using [[#GetXferReport]].
This maps a TransferMemory buffer which is used for the [[#XferReport]] Ring, replacing the heap Ring buffer which was setup during [[#PopulateRing]].
Structure of the tmem:
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x8 || Write index
|-
| 0x8 || 0x8 || Read index
|-
| 0x10 || 0x18*count || Array of [[#XferReport]]
|}
write_index!=read_index indicates that report data is available. The index fields are updated with: <code>index = index+1 % count;</code> write_index is updated by sysmodule, read_index is updated by the user-process. If the index field being used is >=count, this will Abort.
= usb:pd =
= usb:pd =
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || [[#AccessCradleVdoWithWriteRequest]]
| 0 || [[#SetCradleVdo]]
|-
|-
| 1 || [[#AccessCradleVdoWithReadRequest]]
| 1 || [[#GetCradleVdo]]
|-
|-
| 2 ||
| 2 || [[#ResetCradleUsbHub]]
|-
|-
| 3 || [2.0.0+] GetFwType
| 3 || [2.0.0+] [[#GetHostPdcFirmwareType]]
|-
|-
| 4 || [2.0.0+] GetFwRevision
| 4 || [2.0.0+] [[#GetHostPdcFirmwareRevision]]
|-
|-
| 5 || [2.0.0+] GetManufacturerId
| 5 || [2.0.0+] [[#GetHostPdcManufactureId]]
|-
|-
| 6 || [2.0.0+] GetDeviceId
| 6 || [2.0.0+] [[#GetHostPdcDeviceId]]
|-
|-
| 7 || [3.0.0+]
| 7 || [3.0.0+] [[#EnableCradleRecovery]]
|-
|-
| 8 || [3.0.0+]
| 8 || [3.0.0+] [[#DisableCradleRecovery]]
|}
|}
=== AccessCradleVdoWithWriteRequest ===
=== SetCradleVdo ===
Takes two input u32s '''Value''' and '''UserId'''. No output.
Takes an input u32 '''Value''' and a [[#CradleVdmCommand]]. No output.
[[#CradleVdmCommand]] is translated to the actual [[#VdmCommand]] to send.
=== AccessCradleVdoWithReadRequest ===
=== GetCradleVdo ===
Takes an input u32 '''UserId'''. Returns an u32 '''Value'''.
Takes an input [[#CradleVdmCommand]]. Returns an u32 '''Value'''.
[[#CradleVdmCommand]] is translated to the actual [[#VdmCommand]] to send.
=== Cmd2 ===
=== ResetCradleUsbHub ===
No input/output.
No input/output.
Sends [[#VdmCommand|VdmCommands]] 32 and 30.
Sends [[#VdmCommand|VdmCommands]] 32 and 30.
=== GetFwType ===
=== GetHostPdcFirmwareType ===
No input. Returns an output u16.
No input. Returns an output u16.
=== GetFwRevision ===
=== GetHostPdcFirmwareRevision ===
No input. Returns an output u16.
No input. Returns an output u16.
=== GetManufacturerId ===
=== GetHostPdcManufactureId ===
No input. Returns an output u16.
No input. Returns an output u16.
=== GetDeviceId ===
=== GetHostPdcDeviceId ===
No input. Returns an output u16.
No input. Returns an output u16.
=== Cmd7 ===
=== EnableCradleRecovery ===
No input. Returns an output u8.
No input. Returns an output u8.
=== Cmd8 ===
=== DisableCradleRecovery ===
No input. Returns an output u8.
No input. Returns an output u8.
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || GetFwType
| 0 || [[#GetHostPdcFirmwareType]]
|-
|-
| 1 || GetFwRevision
| 1 || [[#GetHostPdcFirmwareRevision]]
|-
|-
| 2 || GetManufacturerId
| 2 || [[#GetHostPdcManufactureId]]
|-
|-
| 3 || GetDeviceId
| 3 || [[#GetHostPdcDeviceId]]
|}
|}
= usb:pm =
= usb:pm =
This is "nn::usb::pm::IPmService".
This is "nn::usb::pm::IPmService".
[8.0.0+] This is "nn::usb::pm::IPmMainService".
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Cmd || Name
! Cmd || Name
|-
|-
| 0 ||
| 0 || GetPowerEvent
|-
|-
| 1 ||
| 1 || GetPowerState
|-
|-
| 2 ||
| 2 || GetDataEvent
|-
|-
| 3 ||
| 3 || GetDataRole
|-
|-
| 4 ||
| 4 || SetDiagData
|-
|-
| 5 ||
| 5 || GetDiagData
|}
|}
= usb:qdb =
= usb:qdb =
This is "nn::usb::qdb::IQdbManager".
This was added with [7.0.0+].
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Cmd || Name
! Cmd || Name
|-
|-
| 0 ||
| 0 || [[#ImportQuirkDevices]]
|-
|-
| 1 ||
| 1 || [[#HasQuirk]]
|}
|}
== Cmd0 ==
== ImportQuirkDevices ==
No input/output, takes a type-0x5 input buffer.
No input/output, takes a type-0x5 input buffer.
This loads data for [[#HidGamepad]] with the input .json.
This loads data for [[#HidGamepad]] with the input .json.
== Cmd1 ==
== HasQuirk ==
Takes 6-bytes of input (u16s '''vid''', '''pid''', '''bcdDevice''') and a type-0x5 input buffer, returns an output u8 bool indicating success.
Takes 6-bytes of input (u16s '''vid''', '''pid''', '''bcdDevice''') and a type-0x5 input buffer, returns an output u8 bool indicating success.
= usb:obsv =
= usb:obsv =
This is "nn::usb::pm::IPmObserverService".
This was added with [8.0.0+].
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Cmd || Name
! Cmd || Name
|-
|-
| 0 ||
| 0 || GetTopologyChangeEvent
|-
| 1 || GetFlattenedTopology
|}
= UsbInterfaceDescriptor =
This is "nn::usb::UsbInterfaceDescriptor".
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x1 || bLength
|-
| 0x1 || 0x1 || bDescriptorType
|-
| 0x2 || 0x1 || bInterfaceNumber
|-
| 0x3 || 0x1 || bAlternateSetting
|-
| 0x4 || 0x1 || bNumEndpoints
|-
| 0x5 || 0x1 || bInterfaceClass
|-
| 0x6 || 0x1 || bInterfaceSubClass
|-
| 0x7 || 0x1 || bInterfaceProtocol
|-
| 0x8 || 0x1 || iInterface
|}
= UsbStringDescriptor =
This is "nn::usb::UsbStringDescriptor". This is a string.
= UsbEndpointDescriptor =
This is "nn::usb::UsbEndpointDescriptor".
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x1 || bLength
|-
| 0x1 || 0x1 || bDescriptorType
|-
| 0x2 || 0x1 || bEndpointAddress
|-
| 0x3 || 0x1 || bmAttributes
|-
| 0x4 || 0x2 || wMaxPacketSize
|-
| 0x6 || 0x1 || bInterval
|-
| 0x7 || 0x1 || bRefresh
|-
| 0x8 || 0x1 || bSynchAddress
|}
= UsbState =
{| class="wikitable" border="1"
|-
! Value || Name || Description
|-
| 0 || Detached || Device is not attached to USB.
|-
| 1 || Attached || Device is attached, but is not powered.
|-
| 2 || Powered || Device is attached and powered, but has not been reset.
|-
| 3 || Default || Device is attached, powered, and has been reset, but does not have an address.
|-
| 4 || Address || Device is attached, powered, has been reset, has an address, but is not configured.
|-
| 5 || Configured || Device is attached, powered, has been reset, has an address, configured, and may be used.
|-
| 6 || Suspended || Device is attached and powered, but has not seen bus activity for 3ms. Device is suspended and cannot be used.
|}
= UsbVidPidBcd =
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x2 || Vid (idVendor)
|-
| 0x2 || 0x2 || Pid (idProduct)
|-
| 0x4 || 0x2 || bcdDevice
|-
| 0x6 || 0x20 || Manufacturer (ASCII string padded to 0x20 bytes)
|-
| 0x26 || 0x20 || Product (ASCII string padded to 0x20 bytes)
|-
| 0x46 || 0x20 || SerialNumber (ASCII string padded to 0x20 bytes)
|}
= UrbReport =
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x10 * 8 || Array of [[#UrbReportEntry]]
|-
| 0x80 || 0x4 || ReportEntryCount
|}
= UrbReportEntry =
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x4 || Id
|-
| 0x4 || 0x4 || RequestedSize
|-
| 0x8 || 0x4 || TransferredSize
|-
| 0xC || 0x4 || Status (converted to error-codes: 0x3 = success, 0x4 = 0x828c, 0x5 = 0x748c; all other values are invalid)
|}
= UsbDeviceSpeed =
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 0 || None
|-
| 1 || Low
|-
| 2 || Full
|-
| 3 || High
|-
|-
| 1 ||
| 4 || Super
|}
|}
| 0xC || 0x4 || transferredSize
| 0xC || 0x4 || transferredSize
|-
|-
| 0x10 || 0x8? || ?
| 0x10 || 0x8 || [[#PostBufferAsync_2|Id]]
|}
|}
Official sw only uses the Result/size fields.
Official sw only uses the Result/size fields.
= CradleVdmCommand =
This is "nn::usb::pd::CradleVdmCommand".
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 0 ||
|-
| 1 ||
|-
| 2 ||
|-
| 3 ||
|-
| 4 ||
|-
| 5 ||
|-
| 6 ||
|-
| 7 ||
|-
| 8 ||
|-
| 9 ||
|-
| 10 ||
|}
= VdmCommand =
= VdmCommand =
This is "nn::usb::pd::driver::detail::VdmCommand".
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || UserId || Name
! Value || [[#CradleVdmCommand|CradleVdmCommand]] || [[#VdmCommandType|VdmCommandType]] || VdmCommandLength || Name
|-
| 0 || - || -1 || 0 || None
|-
| 1 || 0 || 0 || 3 || LedControlRequest
|-
| 2 || - || 1 || 3 || LedControlReply
|-
|-
| 0 || - || None
| 3 || 10 || 0 || 3 || DeviceTypeRequest
|-
|-
| 1 || 0 || LedControlRequest
| 4 || - || 1 || 3 || DeviceTypeReply
|-
|-
| 2 || - || SleepButtonNotice
| 5 || - || -1 || 0 || UsbPowerErrorNotice
|-
|-
| 3 || 10 || DeviceTypeRequest
| 6 || 1 || 0 || 2 || Dp2HdmiFwVerRequest
|-
|-
| 4 || - || DeviceTypeReply
| 7 || - || 1 || 3 || Dp2HdmiFwVerReply
|-
|-
| 5 || - || UsbPowerErrorNotice
| 8 || - || -1 || 0 || Dp2HdmiFwUpdateRequest
|-
|-
| 6 || 1 || Dp2HdmiFwVerRequest
| 9 || - || -1 || 0 || Dp2HdmiFwUpdateReply
|-
|-
| 7 || - || Dp2HdmiFwVerReply
| 10 || - || -1 || 0 || Dp2HdmiFwUpdateNotice
|-
|-
| 8 || - || Dp2HdmiFwUpdateRequest
| 11 || 2 || 0 || 2 || PdcHFwVerRequest
|-
|-
| 9 || - || Dp2HdmiFwUpdateReply
| 12 || - || 1 || 3 || PdcHFwVerReply
|-
|-
| 10 || - || Dp2HdmiFwUpdateNotice
| 13 || - || -1 || 0 || PdcHFwUpdateRequest
|-
|-
| 11 || 2 || PdcHFwVerRequest
| 14 || - || -1 || 0 || PdcHFwUpdateReply
|-
|-
| 12 || - || PdcHFwVerReply
| 15 || - || -1 || 0 || PdcHFwUpdateNotice
|-
|-
| 13 || - || PdcHFwUpdateRequest
| 16 || 3 || 0 || 2 || PdcAFwVerRequest
|-
|-
| 14 || - || PdcHFwUpdateReply
| 17 || - || 1 || 3 || PdcAFwVerReply
|-
|-
| 15 || - || PdcHFwUpdateNotice
| 18 || - || -1 || 0 || PdcAFwUpdateRequest
|-
|-
| 16 || 3 || PdcAFwVerRequest
| 19 || - || -1 || 0 || PdcAFwUpdateReply
|-
|-
| 17 || - || PdcAFwVerReply
| 20 || - || -1 || 0 || PdcAFwUpdateNotice
|-
|-
| 18 || - || PdcAFwUpdateRequest
| 21 || - || 0 || 3 || DeviceErrorNotice
|-
|-
| 19 || - || PdcAFwUpdateReply
| 22 || 4 || 0 || 2 || DeviceStateRequest
|-
|-
| 20 || - || PdcAFwUpdateNotice
| 23 || - || 1 || 3 || DeviceStateReply
|-
|-
| 21 || - || DeviceErrorNotice
| 24 || 5 || 0 || 2 || McuFwVerRequest
|-
|-
| 22 || 4 || DeviceStateRequest
| 25 || - || 1 || 3 || McuFwVerReply
|-
|-
| 23 || - || DeviceStateReply
| 26 || 6 || 0 || 2 || McuFwUpdateRequest
|-
|-
| 24 || 5 || McuFwVerRequest
| 27 || - || 1 || 2 || McuFwUpdateReply
|-
|-
| 25 || - || McuFwVerReply
| 28 || 7 || 0 || 2 || UsbHubSleepRequest
|-
|-
| 26 || 6 || McuFwUpdateRequest
| 29 || - || 1 || 2 || UsbHubSleepReply
|-
|-
| 27 || - || McuFwUpdateReply
| 30 || 8 || 0 || 2 || UsbHubResetRequest
|-
|-
| 28 || 7 || McuFwUpdateNotice
| 31 || - || 1 || 2 || UsbHubResetReply
|-
|-
| 29 || - ||
| 32 || 9 || 0 || 2 || UsbHubControlRequest
|-
|-
| 30 || 8 ||
| 33 || - || 1 || 2 || UsbHubControlReply
|}
= VdmCommandType =
This is "nn::usb::pd::driver::detail::VdmCommandType".
{| class="wikitable" border="1"
|-
|-
! Value || Name
|-
|-
| 32 || 9 ||
| -1 || None
|-
| 0 || Initiator
|-
| 1 || Ack
|-
| 2 || Nak
|-
| 3 || Busy
|}
|}
<more entries>
<more entries>
]
]
[12.1.0+]: The following entries were added in this json, all of which have quirks set for "HidGamepadWhitelist".
** vid "0F0D", where pid is "0200" - "022F".
** vid "33DD", where pid is "0001" - "000B".
[[Category:Services]]
[[Category:Services]]