2,787
edits
Changes
Jump to navigation
Jump to search
Line 12:
Line 12: − + Line 76:
Line 76: − + − + + + Line 87:
Line 89: − + − + − − === BsdBufferConfig === − /// Configuration structure for bsdInitalize − typedef struct { − u32 version; ///< Observed 1 on 2.0 LibAppletWeb, 2 on 3.0. − − u32 tcp_tx_buf_size; ///< Size of the TCP transfer (send) buffer (initial or fixed). − u32 tcp_rx_buf_size; ///< Size of the TCP recieve buffer (initial or fixed). − u32 tcp_tx_buf_max_size; ///< Maximum size of the TCP transfer (send) buffer. If it is 0, the size of the buffer is fixed to its initial value. − u32 tcp_rx_buf_max_size; ///< Maximum size of the TCP receive buffer. If it is 0, the size of the buffer is fixed to its initial value. − − u32 udp_tx_buf_size; ///< Size of the UDP transfer (send) buffer (typically 0x2400 bytes). − u32 udp_rx_buf_size; ///< Size of the UDP receive buffer (typically 0xA500 bytes). − − u32 sb_efficiency; ///< Number of buffers for each socket (standard values range from 1 to 8). − } BsdBufferConfig; − − − The transfer memory must be larger than a the computed size below. Should the transfer memory be smaller than that, the BSD sockets service would only send ZeroWindow packets (for TCP), resulting in a transfer rate not exceeding 1 byte/s. − − static size_t _bsdGetTransferMemSizeForBufferConfig(const BsdBufferConfig *config) − { − u32 tcp_tx_buf_max_size = config->tcp_tx_buf_max_size != 0 ? config->tcp_tx_buf_max_size : config->tcp_tx_buf_size; − u32 tcp_rx_buf_max_size = config->tcp_rx_buf_max_size != 0 ? config->tcp_rx_buf_max_size : config->tcp_rx_buf_size; − u32 sum = tcp_tx_buf_max_size + tcp_rx_buf_max_size + config->udp_tx_buf_size + config->udp_rx_buf_size; − − sum = ((sum + 0xFFF) >> 12) << 12; // page round-up − return (size_t)(config->sb_efficiency * sum); − } Line 166:
Line 139: − + − + − + − + Line 663:
Line 636: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || RegisterClient ([[#Initialize]])
| 0 || [[#RegisterClient]]
|-
|-
| 1 || StartMonitoring
| 1 || StartMonitoring
| 31 || [7.0.0+] EventFd
| 31 || [7.0.0+] EventFd
|-
|-
| 32 || [7.0.0+] [[#RegisterForStatistics]]
| 32 || [7.0.0+] [[#RegisterResourceStatisticsName]]
|-
|-
| 33 || [10.0.0+] [[#Initialize2]]
| 33 || [10.0.0+] [[#RegisterClientShared]]
|-
|-
| 34 || [15.0.0+] GetSocketStatistics
| 34 || [15.0.0+] GetSocketStatistics
|-
| 35 || [17.0.0+] NifIoctl
|-
|-
| 200 || [15.0.0+] SetThreadCoreMask
| 200 || [15.0.0+] SetThreadCoreMask
|}
|}
== Initialize ==
== RegisterClient ==
Takes a [[#BsdBufferConfig]] (made-up name), the PID, the size of the transfer memory and a copy-handle of the latter.
Takes a [[#LibraryConfigData]], the PID, the size of the transfer memory and a copy-handle of the latter.
== Socket ==
== Socket ==
[7.0.0+] The buffers were replaced with a type-0x6 output buffer.
[7.0.0+] The buffers were replaced with a type-0x6 output buffer.
== RegisterForStatistics ==
== RegisterResourceStatisticsName ==
With [10.0.0+] this now takes an additional 8-bytes of input.
With [10.0.0+] this now takes an additional 8-bytes of input.
== Initialize2 ==
== RegisterClientShared ==
Same input/output as [[#Initalize]] except this doesn't take an input handle.
Same input/output as [[#RegisterClient]] except this doesn't take an input handle.
The work-buffer (size is still specified with this cmd) is backed by memory in the sysmodule, instead of TransferMemory. The size (after alignment) must be >=0x1000 and <=0x13F000.
The work-buffer (size is still specified with this cmd) is backed by memory in the sysmodule, instead of TransferMemory. The size (after alignment) must be >=0x1000 and <=0x13F000.
sdknso will only use this cmd when two flags in the input config are set: the first one being set indicates that the bsd:s service is used, while the second flag enables using this cmd. An error is thrown if the work-buffer size is <0x1000. Otherwise when these flags aren't set, [[#Initialize]] is used as usual.
sdknso will only use this cmd when two flags in the input config are set: the first one being set indicates that the bsd:s service is used, while the second flag enables using this cmd. An error is thrown if the work-buffer size is <0x1000. Otherwise when these flags aren't set, [[#RegisterClient]] is used as usual.
= bsdcfg =
= bsdcfg =
The handle is the service-session handle for "nn::anif::detail::ISfNetworkInterfaceService".
The handle is the service-session handle for "nn::anif::detail::ISfNetworkInterfaceService".
=== LibraryConfigData ===
This is "nn::socket::sf::LibraryConfigData".
/// Configuration structure for bsdInitalize
typedef struct {
u32 version; ///< Observed 1 on 2.0 LibAppletWeb, 2 on 3.0.
u32 tcp_tx_buf_size; ///< Size of the TCP transfer (send) buffer (initial or fixed).
u32 tcp_rx_buf_size; ///< Size of the TCP recieve buffer (initial or fixed).
u32 tcp_tx_buf_max_size; ///< Maximum size of the TCP transfer (send) buffer. If it is 0, the size of the buffer is fixed to its initial value.
u32 tcp_rx_buf_max_size; ///< Maximum size of the TCP receive buffer. If it is 0, the size of the buffer is fixed to its initial value.
u32 udp_tx_buf_size; ///< Size of the UDP transfer (send) buffer (typically 0x2400 bytes).
u32 udp_rx_buf_size; ///< Size of the UDP receive buffer (typically 0xA500 bytes).
u32 sb_efficiency; ///< Number of buffers for each socket (standard values range from 1 to 8).
} BsdBufferConfig;
The transfer memory must be larger than a the computed size below. Should the transfer memory be smaller than that, the BSD sockets service would only send ZeroWindow packets (for TCP), resulting in a transfer rate not exceeding 1 byte/s.
static size_t _bsdGetTransferMemSizeForBufferConfig(const BsdBufferConfig *config)
{
u32 tcp_tx_buf_max_size = config->tcp_tx_buf_max_size != 0 ? config->tcp_tx_buf_max_size : config->tcp_tx_buf_size;
u32 tcp_rx_buf_max_size = config->tcp_rx_buf_max_size != 0 ? config->tcp_rx_buf_max_size : config->tcp_rx_buf_size;
u32 sum = tcp_tx_buf_max_size + tcp_rx_buf_max_size + config->udp_tx_buf_size + config->udp_rx_buf_size;
sum = ((sum + 0xFFF) >> 12) << 12; // page round-up
return (size_t)(config->sb_efficiency * sum);
}
= DeleteMode =
= DeleteMode =