Difference between revisions of "SVC"

From Nintendo Switch Brew
Jump to navigation Jump to search
m (Fix svcGetInfo 16)
Line 771: Line 771:
 
| Process || 15 || 0 || [2.0.0+] NewMapRegionSize
 
| Process || 15 || 0 || [2.0.0+] NewMapRegionSize
 
|-
 
|-
| Process || 16 || 0 || [3.0.0+] PersonalMmHeapSize
+
| Process || 16 || 0 || [3.0.0+] IsVirtualMemoryEnabled
 
|-
 
|-
 
| Process || 17 || 0 || [3.0.0+] PersonalMmHeapUsage
 
| Process || 17 || 0 || [3.0.0+] PersonalMmHeapUsage

Revision as of 18:08, 22 May 2018


System calls

Id Name In Out
0x1 #svcSetHeapSize W1=size W0=result, X1=outaddr
0x2 #svcSetMemoryPermission X0=addr, X1=size, W2=prot W0=result
0x3 #svcSetMemoryAttribute X0=addr, X1=size, W2=state0, W3=state1 W0=result
0x4 #svcMapMemory X0=dstaddr, X1=srcaddr, X2=size W0=result
0x5 #svcUnmapMemory X0=dstaddr, X1=srcaddr, X2=size W0=result
0x6 #svcQueryMemory X0=MemoryInfo*, X2=addr W0=result, W1=PageInfo
0x7 #svcExitProcess None
0x8 #svcCreateThread X1=entry, X2=thread_context, X3=stacktop, W4=prio, W5=processor_id W0=result, W1=handle
0x9 #svcStartThread W0=thread_handle W0=result
0xA #svcExitThread None
0xB #svcSleepThread X0=nano W0=result
0xC #svcGetThreadPriority W1=thread_handle W0=result, W1=prio
0xD #svcSetThreadPriority W0=thread_handle, W1=prio W0=result
0xE #svcGetThreadCoreMask W2=thread_handle W0=result, W1=out, X2=out
0xF #svcSetThreadCoreMask W0=thread_handle, W1=in, X2=in2 W0=result
0x10 #svcGetCurrentProcessorNumber None W0/X0=cpuid
0x11 svcSignalEvent W0=wevent_handle W0=result
0x12 svcClearEvent W0=wevent_or_revent_handle W0=result
0x13 #svcMapSharedMemory W0=shmem_handle, X1=addr, X2=size, W3=perm W0=result
0x14 svcUnmapSharedMemory W0=shmem_handle, X1=addr, X2=size W0=result
0x15 #svcCreateTransferMemory X1=addr, X2=size, W3=perm W0=result, W1=tmem_handle
0x16 svcCloseHandle W0=handle W0=result
0x17 svcResetSignal W0=revent_or_process_handle W0=result
0x18 #svcWaitSynchronization X1=handles_ptr, W2=num_handles. X3=timeout W0=result, W1=handle_idx
0x19 svcCancelSynchronization W0=thread_handle W0=result
0x1A svcArbitrateLock W0=cur_thread_handle, X1=ptr, W2=req_thread_handle
0x1B svcArbitrateUnlock X0=ptr
0x1C svcWaitProcessWideKeyAtomic X0=ptr0, X1=ptr, W2=thread_handle, X3=timeout W0=result
0x1D svcSignalProcessWideKey X0=ptr, W1=value W0=result
0x1E #svcGetSystemTick None X0={value of cntpct_el0}
0x1F svcConnectToNamedPort X1=port_name_str W0=result, W1=handle
0x20 svcSendSyncRequestLight W0=light_session_handle, X1=? W0=result
0x21 svcSendSyncRequest X0=normal_session_handle W0=result
0x22 #svcSendSyncRequestWithUserBuffer X0=cmdbufptr, X1=size, X2=handle W0=result
0x23 svcSendAsyncRequestWithUserBuffer X1=cmdbufptr, X2=size, X3=handle W0=result, W1=revent_handle
0x24 svcGetProcessId W1=thread_or_process_or_debug_handle W0=result, X1=pid
0x25 svcGetThreadId W1=thread_handle W0=result, X1=out
0x26 #svcBreak X0=break_reason,X1,X2=info ?
0x27 svcOutputDebugString X0=str, X1=size W0=result
0x28 svcReturnFromException X0=result
0x29 #svcGetInfo X1=info_id, X2=handle, X3=info_sub_id W0=result, X1=out
0x2A svcFlushEntireDataCache None None
0x2B svcFlushDataCache X0=addr, X1=size W0=result
0x2C [3.0.0+] #svcMapPhysicalMemory X0=addr, X1=size W0=result
0x2D [3.0.0+] svcUnmapPhysicalMemory X0=addr, X1=size W0=result
0x2E [5.0.0+] svcGetFutureThreadInfo X3=timeout W0=result, bunch of crap
0x2F svcGetLastThreadInfo None W0=result, W1,W2,W3,W4=unk, W5=truncated_u64, W6=bool
0x30 svcGetResourceLimitLimitValue W1=reslimit_handle, W2=#LimitableResource W0=result, X1=value
0x31 svcGetResourceLimitCurrentValue W1=reslimit_handle, W2=#LimitableResource W0=result, X1=value
0x32 svcSetThreadActivity W0=thread_handle, W1=bool W0=result
0x33 svcGetThreadContext3 W0=thread_handle, W1=#ThreadContext* W0=result
0x34 [4.0.0+] svcWaitForAddress X0=ptr, W1=ArbitrationType, X2=? X3=timeout
0x35 [4.0.0+] svcSignalToAddress X0=ptr, W1=SignalType, X2=? W3=?
0x3C #svcDumpInfo
0x3D [4.0.0+] svcDumpInfoNew
0x40 svcCreateSession W2=is_light, X3=? W0=result, W1=server_handle, W2=client_handle
0x41 #svcAcceptSession W1=port_handle W0=result, W1=session_handle
0x42 svcReplyAndReceiveLight W0=light_session_handle W0=result, W1,W2,W3,W4,W5,W6,W7=out
0x43 #svcReplyAndReceive X1=ptr_handles, W2=num_handles, X3=replytarget_handle(0=none), X4=timeout W0=result, W1=handle_idx
0x44 svcReplyAndReceiveWithUserBuffer X1=buf, X2=sz, X3=ptr_handles, W4=num_handles, X5=replytarget_handle(0=none), X6=timeout W0=result, W1=handle_idx
0x45 svcCreateEvent None W0=result, W1=wevent_handle, W2=revent_handle
0x48 [5.0.0+] #svcMapPhysicalMemoryUnsafe X0=addr, X1=size W0=result
0x49 [5.0.0+] svcUnmapPhysicalMemoryUnsafe X0=addr, X1=size W0=result
0x4A [5.0.0+] svcSetUnsafeLimit X0=size W0=result
0x4B [4.0.0+] #svcCreateCodeMemory X1=addr, X2=size W0=result, W1=code_memory_handle
0x4C [4.0.0+] #svcControlCodeMemory W0=code_memory_handle, W1=#CodeMemoryOperation, X2=dstaddr, X3=size, W4=perm W0=result
0x4D svcSleepSystem None None
0x4E #svcReadWriteRegister X1=reg_addr, W2=rw_mask, W3=in_val W0=result, W1=out_val
0x4F svcSetProcessActivity W0=process_handle, W1=bool W0=result
0x50 #svcCreateSharedMemory W1=size, W2=myperm, W3=otherperm W0=result, W1=shmem_handle
0x51 #svcMapTransferMemory X0=tmem_handle, X1=addr, X2=size, W3=perm W0=result
0x52 #svcUnmapTransferMemory W0=tmemhandle, X1=addr, X2=size W0=result
0x53 svcCreateInterruptEvent X1=irq_num, W2=flag W0=result, W1=handle
0x54 #svcQueryPhysicalAddress X1=addr W0=result, X1=physaddr, X2=kerneladdr, X3=size
0x55 #svcQueryIoMapping X1=physaddr, X2=size W0=result, X1=virtaddr
0x56 #svcCreateDeviceAddressSpace X1=dev_as_start_addr, X2=dev_as_end_addr W0=result, W1=dev_as_handle
0x57 #svcAttachDeviceAddressSpace W0=device, X1=dev_as_handle W0=result
0x58 #svcDetachDeviceAddressSpace W0=device, X1=dev_as_handle W0=result
0x59 #svcMapDeviceAddressSpaceByForce W0=dev_as_handle, W1=proc_handle, X2=dev_map_addr, X3=dev_as_size, X4=dev_as_addr, W5=perm W0=result
0x5A #svcMapDeviceAddressSpaceAligned W0=dev_as_handle, W1=proc_handle, X2=dev_map_addr, X3=dev_as_size, X4=dev_as_addr, W5=perm W0=result
0x5B svcMapDeviceAddressSpace
0x5C #svcUnmapDeviceAddressSpace W0=dev_as_handle, W1=proc_handle, X2=dev_map_addr, X3=dev_as_size, X4=dev_as_addr W0=result
0x5D svcInvalidateProcessDataCache W0=process_handle, X1=addr, X2=size W0=size
0x5E svcStoreProcessDataCache W0=process_handle, X1=addr, X2=size W0=size
0x5F svcFlushProcessDataCache W0=process_handle, X1=addr, X2=size W0=size
0x60 svcDebugActiveProcess X1=pid W0=result, W1=debug_handle
0x61 svcBreakDebugProcess W0=debug_handle W0=result
0x62 svcTerminateDebugProcess W0=debug_handle W0=result
0x63 svcGetDebugEvent X0=#DebugEventInfo*, W1=debug_handle W0=result
0x64 svcContinueDebugEvent W0=debug_handle, W1=#ContinueDebugFlags, X2=thread_id W0=result
0x65 svcGetProcessList X1=pids_out_ptr, W2=max_out W0=result, W1=num_out
0x66 svcGetThreadList X1=tids_out_ptr, W2=max_out, W3=debug_handle_or_zero W0=result, X1=num_out
0x67 svcGetDebugThreadContext X0=ThreadContext*, X1=debug_handle, X2=thread_id, W3=#ThreadContextFlags W0=result
0x68 svcSetDebugThreadContext W0=debug_handle, W1=#ThreadContextFlags, X2=ThreadContext* W0=result
0x69 svcQueryDebugProcessMemory X0=#MemoryInfo*, X2=debug_handle, X3=addr W0=result, W1=PageInfo
0x6A svcReadDebugProcessMemory X0=buffer*, X1=debug_handle, X2=src_addr, X3=size W0=result
0x6B svcWriteDebugProcessMemory X0=debug_handle, X1=buffer*, X2=dst_addr, X3=size W0=result
0x6C svcSetHardwareBreakPoint W0=HardwareBreakpointId, X1=watchpoint_flags, X2=watchpoint_value/debug_handle?
0x6D svcGetDebugThreadParam X2=debug_handle, X3=thread_id, W4=#DebugThreadParam W0=result, X1=out0, W2=out1
0x6F [5.0.0+] #svcGetSystemInfo X1=info_id, X2=handle, X3=info_sub_id W0=result, X1=out
0x70 svcCreatePort W2=max_sessions, W3=unk_bool, X4=name_ptr W0=result, W1=clientport_handle, W2=serverport_handle
0x71 svcManageNamedPort X1=name_ptr, W2=max_sessions W0=result, W1=serverport_handle
0x72 svcConnectToPort W1=clientport_handle W0=result, W1=session_handle
0x73 #svcSetProcessMemoryPermission W0=process_handle, X1=addr, X2=size, W3=perm W0=result
0x74 #svcMapProcessMemory X0=srcaddr, W1=process_handle, X2=dstaddr, X3=size W0=result
0x75 #svcUnmapProcessMemory W0=process_handle, X1=dstaddr, X2=srcaddr, X3=size W0=result
0x76 #svcQueryProcessMemory X0=meminfo_ptr, W2=process_handle, X3=addr W0=result, W1=pageinfo
0x77 #svcMapProcessCodeMemory W0=process_handle, X1=dstaddr, X2=srcaddr, X3=size W0=result
0x78 #svcUnmapProcessCodeMemory W0=process_handle, X1=dstaddr, X2=srcaddr, X3=size W0=result
0x79 #svcCreateProcess X1=procinfo_ptr, X2=caps_ptr, W3=cap_num W0=result, W1=process_handle
0x7A svcStartProcess W0=process_handle, W1=main_thread_prio, W2=default_cpuid, W3=main_thread_stacksz W0=result
0x7B svcTerminateProcess W0=process_handle W0=result
0x7C #svcGetProcessInfo W0=process_handle W0=result, X1=#ProcessState
0x7D svcCreateResourceLimit None W0=result, W1=reslimit_handle
0x7E svcSetResourceLimitLimitValue W0=reslimit_handle, W1=#LimitableResource, X2=value W0=result
0x7F svcCallSecureMonitor X0=smc_sub_id, X1,X2,X3,X4,X5,X6,X7=smc_args X0,X1,X2,X3,X4,X5,X6,X7=result

svcSetHeapSize

Argument Type Name
(In) W1 u64 Size
(Out) W0 #Result Ret
(Out) X1 u64 OutAddr

Description: Set the process heap to a given Size. It can both extend and shrink the heap.

Size must be a multiple of 0x200000.

On success, the heap base-address (which is fixed by kernel, aslr'd) is written to OutAddr.

Uses current process pool partition.

[2.0.0+] Size must be less than 0x18000000.

svcSetMemoryPermission

Argument Type Name
(In) X0 void* Addr
(In) X1 u64 Size
(In) W2 #Permission Prot
(Out) W0 #Result Ret

Description: Change permission of page-aligned memory region.

Bit2 of permission (exec) is not allowed. Setting write-only is not allowed either (bit1).

This can be used to move back and forth between ---, r-- and rw-.

svcSetMemoryAttribute

Argument Type Name
(In) X0 void* Addr
(In) X1 u64 Size
(In) W2 u32 State0
(In) W3 u32 State1
(Out) W0 #Result Ret

Description: Change attribute of page-aligned memory region.

This is used to turn on/off caching for a given memory area. Useful when talking to devices such as the GPU.

What happens "under the hood" is the "Memory Attribute Indirection Register" index is changed from 2 to 3 in the MMU descriptor.

State0 State1 Action
0 0 Clear bit3 in #MemoryAttribute.
8 0 Clear bit3 in #MemoryAttribute.
8 8 Set bit3 in #MemoryAttribute.

svcMapMemory

Argument Type Name
(In) X0 void* DstAddr
(In) X1 void* SrcAddr
(In) X2 u64 Size
(Out) W0 #Result Ret

Description: Maps a memory range into a different range.

Mainly used for adding guard pages around stack.

Source range gets reprotected to --- (it can no longer be accessed), and bit0 is set in the source #MemoryAttribute.

If dstaddr >= LowerTreshold, the dst-range is enforced to be within the process' "MapRegion". Code can get the range of this region from #svcGetInfo id0=2,3.

In this case, the mapped memory will have state 0x5C3C0B.

As long as (dstaddr+size) < LowerThreshold, then you can map anywhere but the mapped memory will have state 0x482907 instead.

LowerTreshold is 0x80000000 for 36-bit address spaces, and 0x40000000 for 32-bit ones.

[2.0.0+] Support for the 0x482907 mappings outside the "MapRegion" were removed.

svcUnmapMemory

Argument Type Name
(In) X0 void* DstAddr
(In) X1 void* SrcAddr
(In) X2 u64 Size
(Out) W0 #Result Ret

Description: Unmaps a region that was previously mapped with #svcMapMemory.

It's possible to unmap ranges partially, you don't need to unmap the entire range "in one go".

The srcaddr/dstaddr must match what was given when the pages were originally mapped.

svcQueryMemory

Argument Type Name
(In) X0 #MemoryInfo* MemInfo
(In) X2 void* Addr
(Out) W0 #Result Ret
(Out) W1 PageInfo PageInfo

Description: Query information about an address. Will always fetch the lowest page-aligned mapping that contains the provided address.

Outputs a #MemoryInfo struct.

svcExitProcess

Argument Type Name
(In) None
(Out) None

Description: Exits the current process.

svcCreateThread

Argument Type Name
(In) X1 void(*)(void*) Entry
(In) X2 void* ThreadContext
(In) X3 void* StackTop
(In) W4 u32 Priority
(In) W5 u32 ProcessorId
(Out) W0 #Result Ret
(Out) W1 Handle<Thread> Handle

Description: Create a thread in the current process.

Processor_id must be 0,1,2,3 or -2, where -2 uses the default cpuid for process.

svcStartThread

Argument Type Name
(In) W0 Handle<Thread> Handle
(Out) None

Description: Starts the thread for the provided handle.

svcExitThread

Argument Type Name
(In) None
(Out) None

Description: Exits the current thread.

svcSleepThread

Argument Type Name
(In) X0 u64 Nano
(Out) W0 #Result Ret

Description: Sleep for a specified amount of time, or yield thread.

Setting nano=0 means "yield thread".

svcGetThreadPriority

Argument Type Name
(In) W1 Handle<Thread> Handle
(Out) W0 #Result Ret
(Out) W1 u64 Priority

Description: Get priority of provided thread handle.

svcSetThreadPriority

Argument Type Name
(In) W0 Handle<Thread> Handle
(In) W1 u32 Priority
(Out) W0 #Result Ret

Description: Set priority of provided thread handle.

Priority is a number 0-0x3F. Lower value means higher priority.

svcGetThreadCoreMask

Argument Type Name
(In) W2 Handle<Thread> Handle
(Out) W0 #Result Ret
(Out) W1 u32 Out0
(Out) X2 u64 Out1

Description: Get affinity mask of provided thread handle.

svcSetThreadCoreMask

Argument Type Name
(In) W0 Handle<Thread> Handle
(In) W1 u32 In0
(In) X2 u64 In1
(Out) W0 #Result Ret

Description: Set affinity mask of provided thread handle.

svcGetCurrentProcessorNumber

Argument Type Name
(In) None
(Out) W0/X0 u64 CpuId

Description: Get which cpu is executing the current thread.

Cpu-id is an integer in the range 0-3.

svcMapSharedMemory

Argument Type Name
(In) W0 Handle<SharedMemory> MemHandle
(In) X1 void* Addr
(In) X2 u64 Size
(In) W3 #Permission Permissions
(Out) W0 #Result Ret

Maps the block supplied by the handle. The required permissions are different for the process that created the handle and all other processes.

Increases reference count for the KSharedMemory object. Thus in order to release the memory associated with the object, all handles to it must be closed and all mappings must be unmapped.

svcCreateTransferMemory

Argument Type Name
(In) X1 void* Addr
(In) X2 u64 Size
(In) W3 #Permission Permissions
(Out) W0 #Result Ret
(Out) W1 Handle<TransferMemory> Handle

This one reprotects the src block with perms you give it. It also sets bit0 into #MemoryAttribute.

Executable bit perm not allowed.

Closing all handles automatically causes the bit0 in #MemoryAttribute to clear, and the permission to reset.

svcWaitSynchronization

Argument Type Name
(In) X1 Handle* HandlesPtr
(In) W2 u64 HandlesNum
(In) X3 u64 Timeout
(Out) W0 #Result Ret
(Out) W1 u64 HandleIndex

Works with num_handles <= 0x40, error on num_handles == 0.

Does not accept 0xFFFF8001 or 0xFFFF8000 as handles.

Object types

Port: signals when there is an incoming connection waiting to be accepted.

Session (server-side): signals when there is an incoming message waiting to be received or the pipe is closed.

Result codes

0x0: Success. One of the objects was signalled before the timeout expired. Handle index is updated to indicate which object signalled.

0xe401: Invalid handle. Returned when one of the handles passed is invalid. Handle index is not updated.

0xea01: Timeout. Returned when no objects have been signalled within the timeout. Handle index is not updated.

svcGetSystemTick

Argument Type Name
(Out) X0 u64 Ticks

Returns the value of cntpct_el0.

The frequency is 19200000 Hz (constant from official sw).

Official sw reads cntpct_el0 directly from usermode without using this SVC. sdk-nso has this SVC, but it's not known to be called anywhere.

svcSendSyncRequestWithUserBuffer

Argument Type Name
(In) X0 void* CmdPtr
(In) X1 u64 Size
(In) W2 Handle<Session> Handle
(Out) W0 #Result Ret

Size must be 0x1000-aligned.

svcBreak

Argument Type Name
(In) X0 u64 Break Reason
(In) X1 u64
(In) X2 u64 Info
(Out) ? ? ?

When used on retail where inx0 bit31 is clear, the system will throw a fatal-error. Otherwise when bit31 is set, it will return 0 and notify the debugger?

svcGetInfo

Argument Type Name
(In) X1 u64 InfoId
(In) W2 Handle Handle
(In) X3 u64 InfoSubId
(Out) W0 #Result Ret
(Out) X1 u64 Out
Handle type Id0 Id1 Description
Process 0 0 AllowedCpuIdBitmask
Process 1 0 AllowedThreadPrioBitmask
Process 2 0 MapRegionBaseAddr
Process 3 0 MapRegionSize
Process 4 0 HeapRegionBaseAddr
Process 5 0 HeapRegionSize
Process 6 0 TotalMemoryAvailable. Total memory available(free+used).
Process 7 0 TotalMemoryUsage. Total used size of codebin memory + main-thread stack + allocated heap.
Zero 8 0 IsCurrentProcessBeingDebugged
Zero 9 0 Returns ResourceLimit handle for current process. Used by PM.
Zero 10 -1, {current coreid} IdleTickCount
Zero 11 0-3 RandomEntropy from current process. TRNG. Used to seed usermode PRNGs.
Process 12 0 [2.0.0+] AddressSpaceBaseAddr
Process 13 0 [2.0.0+] AddressSpaceSize
Process 14 0 [2.0.0+] NewMapRegionBaseAddr
Process 15 0 [2.0.0+] NewMapRegionSize
Process 16 0 [3.0.0+] IsVirtualMemoryEnabled
Process 17 0 [3.0.0+] PersonalMmHeapUsage
Process 18 0 [3.0.0+] TitleId
Zero 19 0 [4.0.0-4.1.0] PrivilegedProcessId_LowerBound
Zero 19 1 [4.0.0-4.1.0] PrivilegedProcessId_UpperBound
Process 20 0 [5.0.0+] UserExceptionContextAddr
Thread 0xF0000002 0 Performance counter related.

svcMapPhysicalMemory

This is like svcSetHeapSize except you can allocate heap at any address you'd like.

Uses current process pool partition.

svcDumpInfo

Argument Type Name
(In) None
(Out) None

Does nothing, just returns with registers set to all-zero.

svcAcceptSession

Argument Type Name
(In) W1 Handle<Port> Port
(Out) W0 #Result Result
(Out) W1 Handle<ServerSession> Session

Result codes

0xf201: No session waiting to be accepted

svcReplyAndReceive

Argument Type Name
(In) W1 *Handle<Port or ServerSession> Handles
(In) W2 u32 NumHandles
(In) W3 Handle<ServerSession> ReplyTarget
(In) X4 u64 (nanoseconds) Timeout
(Out) W0 #Result Result
(Out) W1 u32 HandleIndex

If ReplyTarget is not zero, a reply from the TLS will be sent to that session. Then it will wait until either of the passed sessions has an incoming message, is closed, a passed port has an incoming connection, or the timeout expires. If there is an incoming message, it is copied to the TLS.

After being validated, passed handles will be enumerated in order; even if a session has been closed, if one that appears earlier in the list has an incoming message, it will take priority and a result code of 0x0 will be returned.

Result codes

0x0: Success. Either a session has an incoming message or a port has an incoming connection. HandleIndex is set appropriately.

0xea01: Timeout. No handles were signalled before the timeout expired. HandleIndex is not updated.

0xf601: Port remote dead. One of the sessions has been closed. HandleIndex is set appropriately.

svcMapPhysicalMemoryUnsafe

Same as #svcMapPhysicalMemory except it always uses pool partition 0.

svcCreateCodeMemory

Takes an address range with backing memory to create the code memory object.

The memory is initially memset to 0xFF after being locked.

svcControlCodeMemory

Maps the backing memory for a Code memory object into the current process.

For CodeMemoryOperation_MapOwner, memory permission must be RW-.

For CodeMemoryOperation_MapSlave, memory permission must be R-- or R-X.

Operations CodeMemoryOperation_UnmapOwner/CodeMemoryOperation_UnmapSlave unmap memory that was previously mapped this way.

This allows one "secure JIT" process to map the code memory as RW-, and the other "slave" process to map it R-X.

[5.0.0+] Error 0xE401 is now returned when the process owner of the Code memory object is the same as the current process.

svcReadWriteRegister

Argument Type Name
(In) X1 u64 RegAddr
(In) W2 u64 RwMask
(In) W3 u64 InValue
(Out) W0 #Result Ret
(Out) W1 u64 OutValue

Read/write IO registers with a hardcoded whitelist. Input address is physical-address and must be aligned to 4.

rw_mask is 0 for reading and 0xffffffff for writing. You can also write individual bits by using a mask value.

You can only write to registers inside physical pages 0x70019000 (MC), 0x7001C000 (MC0), 0x7001D000 (MC1), and they all share the same whitelist.

The whitelist is same for writing as for reading.

The whitelist is:

0x054, 0x090, 0x094, 0x098, 0x09c, 0x0a0, 0x0a4, 0x0a8, 0x0ac, 0x0b0, 0x0b4, 0x0b8, 0x0bc, 0x0c0, 0x0c4, 0x0c8, 0x0d0, 0x0d4, 0x0d8, 0x0dc, 0x0e0, 0x100, 0x108, 0x10c, 0x118, 0x11c, 0x124, 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c, 0x158, 0x15c, 0x164, 0x168, 0x16c, 0x170, 0x174, 0x178, 0x17c, 0x200, 0x204, 0x2e4, 0x2e8, 0x2ec, 0x2f4, 0x2f8, 0x310, 0x314, 0x320, 0x328, 0x344, 0x348, 0x370, 0x374, 0x37c, 0x380, 0x390, 0x394, 0x398, 0x3ac, 0x3b8, 0x3bc, 0x3c0, 0x3c4, 0x3d8, 0x3e8, 0x41c, 0x420, 0x424, 0x428, 0x42c, 0x430, 0x44c, 0x47c, 0x480, 0x484, 0x50c, 0x554, 0x558, 0x55c, 0x670, 0x674, 0x690, 0x694, 0x698, 0x69c, 0x6a0, 0x6a4, 0x6c0, 0x6c4, 0x6f0, 0x6f4, 0x960, 0x970, 0x974, 0xa20, 0xa24, 0xb88, 0xb8c, 0xbc4, 0xbc8, 0xbcc, 0xbd0, 0xbd4, 0xbd8, 0xbdc, 0xbe0, 0xbe4, 0xbe8, 0xbec, 0xc00, 0xc5c, 0xcac


[2.0.0+] Whitelist was extended with 0x4c4, 0x4c8, 0x4cc, 0x584, 0x588, 0x58c.

[2.0.0+] The IO registers in range 0x7000E400 (PMC) size 0xC00 skip the whitelist, and do a TrustZone call using SMC Id1 0xC3000008(ReadWriteRegister).

[4.0.0+] Access to the Memory Controller (0x70019000) also uses smcReadWriteRegister.

Here is the whitelist imposed by that SMC, relative to the start of the PMC registers:

0x000, 0x00c, 0x010, 0x014, 0x01c, 0x020, 0x02c, 0x030, 0x034, 0x038, 0x03c, 0x040, 0x044, 0x048, 0x0dc, 0x0e0, 0x0e4, 0x160, 0x164, 0x168, 0x170, 0x1a8, 0x1b8, 0x1bc, 0x1c0, 0x1c4, 0x1c8, 0x2b4, 0x2d4, 0x440, 0x4d8

Here is the whitelist imposed by smcReadWriteRegister (checked in addition to the whitelist in svcReadWriteRegister), relative to the start of the MC registers:

0x000, 0x004, 0x008, 0x00C, 0x010, 0x01C, 0x020, 0x030, 0x034, 0x050, 0x054, 0x090, 0x094, 0x098, 0x09C, 0x0A0, 0x0A4, 0x0A8, 0x0AC, 0x0B0, 0x0B4, 0x0B8, 0x0BC, 0x0C0, 0x0C4, 0x0C8, 0x0D0, 0x0D4, 0x0D8, 0x0DC, 0x0E0, 0x100, 0x108, 0x10C, 0x118, 0x11C, 0x124, 0x128, 0x12C, 0x130, 0x134, 0x138, 0x13C, 0x158, 0x15C, 0x164, 0x168, 0x16C, 0x170, 0x174, 0x178, 0x17C, 0x200, 0x204, 0x238, 0x240, 0x244, 0x250, 0x254, 0x258, 0x264, 0x268, 0x26C, 0x270, 0x274, 0x280, 0x284, 0x288, 0x28C, 0x294, 0x2E4, 0x2E8, 0x2EC, 0x2F4, 0x2F8, 0x310, 0x314, 0x320, 0x328, 0x344, 0x348, 0x370, 0x374, 0x37C, 0x380, 0x390, 0x394, 0x398, 0x3AC, 0x3B8, 0x3BC, 0x3C0, 0x3C4, 0x3D8, 0x3E8, 0x41C, 0x420, 0x424, 0x428, 0x42C, 0x430, 0x44C, 0x47C, 0x480, 0x484, 0x4C4, 0x4C8, 0x4CC, 0x50C, 0x554, 0x558, 0x55C, 0x584, 0x588, 0x58C, 0x670, 0x674, 0x690, 0x694, 0x698, 0x69C, 0x6A0, 0x6A4, 0x6C0, 0x6C4, 0x6F0, 0x6F4, 0x960, 0x970, 0x974, 0x9B8, 0xA20, 0xA24, 0xA88, 0xA94, 0xA98, 0xA9C, 0xAA0, 0xAA4, 0xAA8, 0xAAC, 0xAB0, 0xAB4, 0xAB8, 0xABC, 0xAC0, 0xAC4, 0xAC8, 0xACC, 0xAD0, 0xAD4, 0xAD8, 0xADC, 0xAE0, 0xB88, 0xB8C, 0xBC4, 0xBC8, 0xBCC, 0xBD0, 0xBD4, 0xBD8, 0xBDC, 0xBE0, 0xBE4, 0xBE8, 0xBEC, 0xC00, 0xC5C, 0xCAC

svcCreateSharedMemory

Argument Type Name
(In) W1 u64 Size
(In) W2 #Permission LocalPerm
(In) W3 #Permission RemotePerm
(Out) W0 #Result Ret
(Out) W1 Handle<SharedMemory> MemHandle

Other perm can be used to enforce permission 1, 3, or 0x10000000 if don't care.

Allocates memory from the current process' pool partition.

svcMapTransferMemory

Argument Type Name
(In) X0 Handle<TransferMemory> MemHandle
(In) X1 void* Addr
(In) X2 u64 Size
(In) W3 #Permission Permissions
(Out) W0 #Result Ret

The newly mapped pages will have #MemoryState type 0xE.

You must pass same size and permissions as given in svcCreateMemoryMirror, otherwise error.

svcUnmapTransferMemory

Argument Type Name
(In) X0 Handle<TransferMemory> MemHandle
(In) X1 void* Addr
(In) X2 u64 Size
(Out) W0 #Result Ret

Size must match size given in map syscall, otherwise there's an invalid-size error.

svcQueryPhysicalAddress

Argument Type Name
(In) X1 u64 Addr
(Out) W0 #Result Ret
(Out) X1 u64 PhysAddr
(Out) X2 u64 KernelAddr
(Out) X3 u64 Size

svcQueryIoMapping

Argument Type Name
(In) X1 u64 PhysAddr
(In) X2 u64 Size
(Out) W0 #Result Ret
(Out) X1 void* VirtAddr

Description: Returns a virtual address mapped to a given IO range.

svcCreateDeviceAddressSpace

Argument Type Name
(In) X1 u64 StartAddr
(In) X2 u64 EndAddr
(Out) W0 #Result Ret
(Out) W1 Handle<DeviceAddressSpace> AddressSpaceHandle

Description: Creates a virtual address space for binding device address spaces and returns a handle.

dev_as_start_addr is normally set to 0 and dev_as_end_addr is normally set to 0xFFFFFFFF.

svcAttachDeviceAddressSpace

Argument Type Name
(In) W0 #DeviceName DeviceId
(In) X1 Handle<DeviceAddressSpace> DeviceAsHandle
(Out) W0 #Result Ret

Description: Attaches a device address space to a device.

svcDetachDeviceAddressSpace

Argument Type Name
(In) W0 #DeviceName DeviceId
(In) X1 Handle<DeviceAddressSpace> DeviceAsHandle
(Out) W0 #Result Ret

Description: Detaches a device address space from a device.

svcMapDeviceAddressSpaceByForce

Argument Type Name
(In) W0 Handle<DeviceAddressSpace> DeviceAsHandle
(In) W1 Handle<Process> ProcessHandle
(In) X2 void* SrcAddr
(In) X3 u64 DeviceAsSize
(In) X4 u64 DeviceAsAddr
(In) W5 #Permission Permissions
(Out) W0 #Result Ret

Description: Maps an attached device address space to an userspace address.

dev_map_addr is the userspace destination address, while dev_as_addr is the source address between dev_as_start_addr and dev_as_end_addr (passed to #svcCreateDeviceAddressSpace).

The userspace destination address must have the MapDeviceAllowed bit set. Bit IsDeviceMapped will be set after mapping.

svcMapDeviceAddressSpaceAligned

Argument Type Name
(In) W0 Handle<DeviceAddressSpace> DeviceAsHandle
(In) W1 Handle<Process> ProcessHandle
(In) X2 void* SrcAddr
(In) X3 u64 DeviceAsSize
(In) X4 u64 DeviceAsAddr
(In) W5 #Permission Permissions
(Out) W0 #Result Ret

Description: Maps an attached device address space to an userspace address.

Same as #svcMapDeviceAddressSpaceByForce, but the userspace destination address must have the MapDeviceAlignedAllowed bit set instead.

svcUnmapDeviceAddressSpace

Argument Type Name
(In) W0 Handle<DeviceAddressSpace> DeviceAsHandle
(In) W1 Handle<Process> ProcessHandle
(In) X2 void* SrcAddr
(In) X3 u64 DeviceAsSize
(In) X4 u64 DeviceAsAddr
(Out) W0 #Result Ret

Description: Unmaps an attached device address space from an userspace address.

svcGetSystemInfo

Argument Type Name
(In) X1 u64 InfoId
(In) W2 Handle Handle
(In) X3 u64 InfoSubId
(Out) W0 #Result Ret
(Out) X1 u64 Out
Handle type Id0 Id1 Description
Zero 0 0 TotalMemorySize_Application
Zero 0 1 TotalMemorySize_Applet
Zero 0 2 TotalMemorySize_System
Zero 0 3 TotalMemorySize_SystemUnsafe
Zero 1 0 CurrentMemorySize_Application
Zero 1 1 CurrentMemorySize_Applet
Zero 1 2 CurrentMemorySize_System
Zero 1 3 CurrentMemorySize_SystemUnsafe
Zero 2 0 PrivilegedProcessId_LowerBound
Zero 2 1 PrivilegedProcessId_UpperBound

svcSetProcessMemoryPermission

Argument Type Name
(In) W0 Handle<Process> ProcessHandle
(In) X1 u64 Addr
(In) X2 u64 Size
(In) W3 void* Perm
(Out) W0 #Result Ret

This sets the memory permissions for the specified memory with the supplied process handle.

This throws an error(0xD801) when the input perm is >0x5, hence -WX and RWX are not allowed.

svcMapProcessMemory

Argument Type Name
(In) X0 u64 DstAddr
(In) W1 Handle<Process> ProcessHandle
(In) X2 void* SrcAddr
(In) X3 u64 Size
(Out) W0 #Result Ret

Maps the src address from the supplied process handle into the current process.

This allows mapping code and rodata with RW- permission.

svcUnmapProcessMemory

Argument Type Name
(In) X0 void* DstAddr
(In) W1 Handle<Process> ProcessHandle
(In) X2 u64 SrcAddr
(In) X3 u64 Size
(Out) W0 #Result Ret

Unmaps what was mapped by #svcMapProcessMemory.

svcQueryProcessMemory

Argument Type Name
(In) X0 #MemoryInfo* MemInfoPtr
(In) W2 Handle<Process> ProcessHandle
(In) X3 u64 Addr
(Out) W0 #Result Ret
(Out) W1 PageInfo PageInfo

Equivalent to #svcQueryMemory except takes a process handle.

svcMapProcessCodeMemory

Argument Type Name
(In) W0 Handle<Process> ProcessHandle
(In) X1 u64 DstAddr
(In) X2 u64 SrcAddr
(In) X3 u64 Size
(Out) W0 #Result Ret

Takes a process handle, and maps normal heap in that process as executable code in that process. Used when loading NROs. This does not support using the current-process handle alias.

svcUnmapProcessCodeMemory

Argument Type Name
(In) W0 Handle<Process> ProcessHandle
(In) X1 u64 DstAddr
(In) X2 u64 SrcAddr
(In) X3 u64 Size
(Out) W0 #Result Ret

Unmaps what was mapped by #svcMapProcessCodeMemory.

svcCreateProcess

Argument Type Name
(In) X1 #CreateProcessInfo* InfoPtr
(In) X2 u64 CapabilitiesPtr
(In) X3 u64 CapabilitiesNum
(Out) W0 #Result Ret
(Out) W1 Handle<Process> ProcessHandle

Takes a #CreateProcessInfo as input.

svcGetProcessInfo

Argument Type Name
(In) W0 Handle<Process> ProcessHandle
(Out) W0 #Result Ret
(Out) W1 #ProcessState State

Returns an enum with value 0-7.

Debugging

[2.0.0+] Exactly 6 debug SVCs require that IsDebugMode is non-zero. Error 0x4201 is returned otherwise.

  • svcBreakDebugProcess
  • svcContinueDebugEvent
  • svcWriteDebugProcessMemory
  • svcSetDebugThreadContext
  • svcTerminateDebugProcess
  • svcSetHardwareBreakPoint

svcDebugActiveProcess stops execution of the target process, the normal method for resuming it requires svcContinueDebugEvent(see above). Closing the debug handle also results in execution being resumed.

Enum/Structures

ThreadContextRequestFlags

Bitfield of one of more of these:

Bit Bitmask Name
0 1 NormalContext
1 2
2 4
3 8

DeviceName

Value Name
0 DeviceName_AFI
1 DeviceName_AVPC
2 DeviceName_DC
3 DeviceName_DCB
4 DeviceName_HC
5 DeviceName_HDA
6 DeviceName_ISP2
7 DeviceName_MSENCNVENC
8 DeviceName_NV
9 DeviceName_NV2
10 DeviceName_PPCS
11 DeviceName_SATA
12 DeviceName_VI
13 DeviceName_VIC
14 DeviceName_XUSB_HOST
15 DeviceName_XUSB_DEV
16 DeviceName_TSEC
17 DeviceName_PPCS1
18 DeviceName_DC1
19 DeviceName_SDMMC1A
20 DeviceName_SDMMC2A
21 DeviceName_SDMMC3A
22 DeviceName_SDMMC4A
23 DeviceName_ISP2B
24 DeviceName_GPU
25 DeviceName_GPUB
26 DeviceName_PPCS2
27 DeviceName_NVDEC
28 DeviceName_APE
29 DeviceName_SE
30 DeviceName_NVJPG
31 DeviceName_HC1
32 DeviceName_SE1
33 DeviceName_AXIAP
34 DeviceName_ETR
35 DeviceName_TSECB
36 DeviceName_TSEC1
37 DeviceName_TSECB1
38 DeviceName_NVDEC1

CodeMemoryOperation

Value Name
0 CodeMemoryOperation_MapOwner
1 CodeMemoryOperation_MapSlave
2 CodeMemoryOperation_UnmapOwner
3 CodeMemoryOperation_UnmapSlave


LimitableResource

Value Name
0 LimitableResource_Memory
1 LimitableResource_Threads
2 LimitableResource_Events
3 LimitableResource_TransferMemories
4 LimitableResource_Sessions

ProcessEvent

Value Name Notes
0 ProcessEvent_Created
1 ProcessEvent_DebugAttached
2 ProcessEvent_DebugDetached
3 ProcessEvent_Crashed Processes will not enter this state unless they were created with EnableDebug.
4 ProcessEvent_Running
5 ProcessEvent_Exiting
6 ProcessEvent_Exited
7 ProcessEvent_DebugSuspended

DebugThreadParam

Value Name
0 DebugThreadParam_ActualPriority
1
2 DebugThreadParam_CpuCore
3
4 DebugThreadParam_CoreMask

CreateProcessInfo

Offset Length Bits Description
0 12 ProcessName (doesn't have to be null-terminated)
0 4 ProcessCategory (0: regular title, 1: kernel built-in)
0x10 8 TitleId
0x18 8 CodeAddr
0x20 4 CodeNumPages
0x24 4 MmuFlags
Bit0 IsAarch64
Bit3-1 #AddressSpaceType
Bit4 [2.0.0+] EnableDebug
Bit5 EnableAslr
Bit6 UseSystemMemBlocks
Bit7 [4.0.0] ?
Bit10-7 [5.0.0+] PoolPartition (0=Application, 1=Applet, 2=Sysmodule, 3=Nvservices)
0x28 4 ResourceLimitHandle
0x2C 4 [3.0.0+] PersonalMmHeapNumPages

On [1.0.0] there's only one pool.

On [2.0.0-4.0.0] PoolPartition is 1 for built-ins and 0 for rest.

On [5.0.0] PoolPartition is specified in CreateProcessArgs. There are now 4 pool partitions.

AddressSpaceType

Type Name Width Description
0 Normal_32Bit 32
1 Normal_36Bit 36
2 WithoutMap_32Bit 32 Appears to be missing map region [?]
3 [2.0.0+] Normal_39Bit 39

MemoryInfo

Offset Length Description
0 8 BaseAddress
8 8 Size
0x10 4 MemoryType: lower 8 bits of #MemoryState
0x14 4 #MemoryAttribute
0x18 4 Permission (bit0: R, bit1: W, bit2: X)
0x1C 4 IpcRefCount
0x20 4 DeviceRefCount
0x24 4 Padding: always zero

MemoryAttribute

Bits Description
0 IsBorrowed
1 IsIpcMapped: when IpcRefCount > 0.
2 IsDeviceMapped: when DeviceRefCount > 0.
3 IsUncached

MemoryState

Bits Description
7-0 Type
8 PermissionChangeAllowed
9 ForceReadWritableByDebugSyscalls
10 IpcSendAllowed_Type0
11 IpcSendAllowed_Type3
12 IpcSendAllowed_Type1
14 ProcessPermissionChangeAllowed
15 MapAllowed
16 UnmapProcessCodeMemoryAllowed
17 TransferMemoryAllowed
18 QueryPhysicalAddressAllowed
19 MapDeviceAllowed (#svcMapDeviceAddressSpace and #svcMapDeviceAddressSpaceByForce)
20 MapDeviceAlignedAllowed
21 IpcBufferAllowed
22 IsPoolAllocated/IsReferenceCounted
23 MapProcessAllowed
24 AttributeChangeAllowed
25 [4.0.0+] CodeMemoryAllowed
Value Type Meaning
0x00000000 MemoryType_Unmapped
0x00002001 MemoryType_Io Mapped by kernel capability parsing in #svcCreateProcess.
0x00042002 MemoryType_Normal Mapped by kernel capability parsing in #svcCreateProcess.
0x00DC7E03 MemoryType_CodeStatic Mapped during #svcCreateProcess.
[1.0.0+]

0x01FEBD04

[4.0.0+]

0x03FEBD04

MemoryType_CodeMutable Transition from 0xDC7E03 performed by #svcSetProcessMemoryPermission.
[1.0.0+]

0x017EBD05

[4.0.0+]

0x037EBD05

MemoryType_Heap Mapped using #svcSetHeapSize.
0x00402006 MemoryType_SharedMemory Mapped using #svcMapSharedMemory.
0x00482907 [1.0.0] MemoryType_WeirdMappedMemory Mapped using #svcMapMemory.
0x00DD7E08 MemoryType_ModuleCodeStatic Mapped using #svcMapProcessCodeMemory.
[1.0.0+]

0x01FFBD09

[4.0.0+]

0x03FFBD09

MemoryType_ModuleCodeMutable Transition from 0xDD7E08 performed by #svcSetProcessMemoryPermission.
0x005C3C0A MemoryType_IpcBuffer0 IPC buffers with descriptor flags=0.
0x005C3C0B MemoryType_MappedMemory Mapped using #svcMapMemory.
0x0040200C MemoryType_ThreadLocal Mapped during #svcCreateThread.
0x015C3C0D MemoryType_TransferMemoryIsolated Mapped using #svcMapTransferMemory when the owning process has perm=0.
0x005C380E MemoryType_TransferMemory Mapped using #svcMapTransferMemory when the owning process has perm!=0.
0x0040380F MemoryType_ProcessMemory Mapped using #svcMapProcessMemory.
0x00000010 MemoryType_Reserved
0x005C3811 MemoryType_IpcBuffer1 IPC buffers with descriptor flags=1.
0x004C2812 MemoryType_IpcBuffer3 IPC buffers with descriptor flags=3.
0x00002013 MemoryType_KernelStack Mapped in kernel during #svcCreateThread.
0x00402214 [4.0.0+] MemoryType_CodeReadOnly Mapped in kernel during #svcControlCodeMemory.
0x00402015 [4.0.0+] MemoryType_CodeWritable Mapped in kernel during #svcControlCodeMemory.

ContinueDebugFlags

Bit Bitmask Description
0 1 CancelSynchronization (only if ResumeAllThreads is set; cancels with error 0x6C01)
1 2 SwallowException
2 4 ResumeAllThreads

DebugEventInfo

Size: 0x40

Offset Length Description
0 u32 EventType
4 u32 Flags (bit0: NeedsContinue)
8 u64 ThreadId
0x10 PerTypeSpecifics

AttachProcess specific:

Offset Length Description
0x10 u64 TitleId
0x18 u64 ProcessId
0x20 char[12] ProcessName
0x2C u32 MmuFlags
0x30 u64 [5.0.0+] UserExceptionContextAddr

AttachThread specific:

Offset Length Description
0x10 u64 ThreadId
0x18 u64 TlsPtr
0x20 u64 Entrypoint

Exit specific:

Offset Length Description
0x10 u64 Type (0=PausedThread, 1=RunningThread, 2=TerminatedProcess)

Exception specific:

Offset Length Description
0x10 u64 ExceptionType
0x18 u64 FaultRegister
0x20 PerExceptionSpecifics

DebugEventType

Value Name
0 DebugEvent_AttachProcess
1 DebugEvent_AttachThread
2
3 DebugEvent_Exit
4 DebugEvent_Exception

DebugExceptionType

Value Name
0 Exception_UndefinedInstruction
1 Exception_InstructionAbort
2 Exception_DataAbortMisc
3 Exception_PcSpAlignmentFault
4 Exception_DebuggerAttached
5 Exception_BreakPoint
6 Exception_UserBreak
7 Exception_DebuggerBreak
8 Exception_BadSvcId

UndefinedInstruction specifics:

Offset Length Description
0x20 u32 Opcode

BreakPoint specifics:

Offset Length Description
0x20 u32 IsWatchpoint

UserBreak specifics:

Offset Length Description
0x20 u32 Info0
0x28 u64 Info1
0x30 u64 Info2

BadSvcId specifics:

Offset Length Description
0x20 u32 SvcId

Exception handling

There is userland code for handling exceptions, however this doesn't seem to be executed on retail mode.

When a usermode exception occurs, it jumps to the main code binary entrypoint (main_binary_address + 0 == _start).

During normal boot _start is invoked with X0=0 and X1=main_thread_handle (triggering normal crt0 setup). During an usermode exception _start is invoked with X0=exception_info0_ptr and X1=exception_info1_ptr instead.

The _start method determines whether to boot normally or handle an exception if X0 is set to 0 or not.