SPL services
spl:
[2.0.0+] Where previously only one AES engine was utilized, there is now support for 4 of them.
| Cmd | Name | Notes |
|---|---|---|
| 0 | #GetConfig | wrapper for GetConfig |
| 1 | user supplied modulus and exponent | |
| 2 | #GenerateAesKek | wrapper for KeygenAndSealX |
| 3 | #LoadAesKey | wrapper for SetKeyslotFromXY |
| 4 | #GenerateAesKey | decrypts 0x10 bytes using AES ECB, uses SetKeyslotFromXY with a fixed Y |
| 5 | #SetConfig | wrapper for SetConfig |
| 7 | GetRandom | uses PrngX931 |
| 9 | wrapper for ImportParamsForFWithXY | |
| 10 | wrapper for ExpMod | |
| 11 | #IsDevelopment | |
| 12 | GenerateSpecificAesKey | wrapper for KeygenA |
| 13 | #DecryptExpModParamsWithXY | wrapper for DecryptExpModParamsWithXY |
| 14 | #GenerateAesKeyOther | decrypts 0x10 bytes using AES ECB, uses SetKeyslotFromXY with fixed X and Y |
| 15 | #DecryptAesCtr | wrapper for SymmetricCrypto |
| 16 | #ComputeCmac | wrapper for CMAC |
| 17 | wrapper for ImportParamsFor10WithXY | |
| 18 | wrapper for ExpModAndKeygenAndSealZ | |
| 19 | #SetKeyslotFromZ | wrapper for SetKeyslotFromZ |
| 20 | [2.0.0+] | wrapper for KeygenAndSealZ |
| 21 | [2.0.0+] #LockAesEngine | |
| 22 | [2.0.0+] #UnlockAesEngine | |
| 23 | [2.0.0+] GetSplWaitEvent |
GetConfig
Takes an input word (ConfigItem), and returns a u64 with the config params.
| ConfigItem | Name |
|---|---|
| 1 | DisableProgramVerification |
| 2 | MemoryConfiguration |
| 5 | HardwareType (0=Icosa, 1=Copper) |
| 6 | IsRetail |
| 7 | IsRecoveryBoot |
| 8 | DeviceId (byte7 clear). |
| 9 | BootReason |
| 10 | MemoryArrange |
| 11 | AllowSkippingNrrSignatures. Also used by FS-sysmodule for non-RSA: when zero, bit62 in fsp-pr registration permissions are force-cleared to zero, otherwise the original is used. |
| 13 | BatteryProfile? |
PM checks id1 and if non-zero, calls fsp-pr SetEnabledProgramVerification(false).
NIM checks that id8 output must match the set:cal DeviceId with byte7 cleared, otherwise panic.
[3.0.0+] RO checks id11, if set then skipping NRR rsa signatures is allowed.
GenerateAesKek
Takes a 16-byte seed ("BisEncryptionKeySourceForKek") and two words ("KeyGeneration" and "option") as input. KeyGeneration ranges from 0 to 2.
Same input gives same output. Output changes when system is rebooted.
LoadAesKey
[2.0.0+] Now verifies that the engine used (0..3) is locked/owned by the current spl session, otherwise errors with 0xD21A. Previously engine was hardcoded to 0.
GenerateAesKey
[2.0.0+] Previously it used engine 0 always. Now it tries to allocate an engine to be used, returns 0xD01A if they're all busy. After command is done, the engine is released.
SetConfig
Takes two input words, a ConfigItem and the value to set.
| ConfigItem | Name |
|---|---|
| 13 | BatteryProfile? |
IsDevelopment
No input params.
Uses #GetConfig internally with id=6. Returns true if output from that is 0, or if the SMC returned error 2.
Returns an u8 flag for whether the system is devunit. Output flag is 0 on retail.
DecryptExpModParamsWithXY
Last SPL cmd used by SSL-sysmodule for TLS client-privk.
GenerateAesKeyOther
Scrambles with a different constant than non-"other" version.
[2.0.0+] Introduced same engine allocation code as for #GenerateAesKey.
DecryptAesCtr
[2.0.0+] Verifies the engine is locked by current session, same change as #LoadAesKey.
ComputeCmac
[2.0.0+] Verifies the engine is locked by current session, same change as #LoadAesKey.
SetKeyslotFromZ
[2.0.0+] Verifies the engine is locked by current session, same change as #LoadAesKey.
LockAesEngine
Returns the id of the engine that was locked, or 0xD01A if all engines are busy. You need to lock an engine before using AES functions.
UnlockAesEngine
Takes a single u32 and unlocks the engine with that id. It must be owned by current session otherwise 0xD21A will be returned.