Difference between revisions of "SPL services"

(consistency)
 
(52 intermediate revisions by 8 users not shown)
Line 1: Line 1:
 +
SPL ("Secure Platform services") is responsible for handling all cryptographic operations within the system and relaying them to the [[SMC|Secure Monitor]] when necessary.
 +
 +
During [1.0.0-3.0.2], the only existing services were "csrng" and "spl:". However, in [4.0.0+] the "spl:" service was refactored and split into new services with different permission levels. Each service exposes the IPC command list differently in order to prevent cryptographic operations to take place in the wrong context.
 +
 +
In [2.0.0+] where previously only one AES keyslot was used, there is now support for 4 of them and when the session closes, all allocated AES keyslots are automatically freed.
 +
 
= csrng =
 
= csrng =
 +
This is "nn::spl::detail::IRandomInterface".
 +
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
 
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || [[#GetRandomBytes]]
+
| 0 || [[#GenerateRandomBytes]]
 
|}
 
|}
  
== GetRandomBytes ==
+
== GenerateRandomBytes ==
Takes a type-6 buffer and fills it with random data. Same command for "spl:" and "csrng" services.
+
Takes an output type-0xA buffer and fills it with random data from [[SMC#GenerateRandomBytes|GenerateRandomBytes SMC]]. Same command for "spl:" and "csrng" services, except for buffer-type.
  
 
= spl: =
 
= spl: =
[2.0.0+] Where previously only one AES engine was utilized, there is now support for 4 of them.
+
This is "nn::spl::detail::IGeneralInterface".
 
 
[2.0.0+] When the session closes, all AES engines that were locked are automatically unlocked.
 
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Cmd || Name || Notes
+
! Cmd || Name
|-
 
| 0 || [[#GetConfig]] || Wrapper for [[SMC#GetConfig|GetConfig]].
 
|-
 
| 1 || [[#UserExpMod]] || User supplied modulus and exponent.
 
|-
 
| 2 || [[#GenerateAesKek]] || Wrapper for [[SMC#KeygenAndSealX|KeygenAndSealX]].
 
|-
 
| 3 || [[#LoadAesKey]] || Wrapper for [[SMC#SetKeyslotFromXY|SetKeyslotFromXY]].
 
|-
 
| 4 || [[#GenerateAesKey]] || Decrypts 0x10 bytes using AES ECB and uses [[SMC#SetKeyslotFromXY|SetKeyslotFromXY]] with a fixed Y.
 
|-
 
| 5 || [[#SetConfig]] || Wrapper for [[SMC#SetConfig|SetConfig]].
 
|-
 
| 7 || [[#GetRandomBytes]] || Uses [[SMC#PrngX931|PrngX931]].
 
|-
 
| 9 || [[#DecryptImportPrivkForExpMod0]] || Wrapper for [[SMC#ImportParamsForFWithXY|ImportParamsForFWithXY]].
 
|-
 
| 10 || [[#ExpMod0]] || Wrapper for [[SMC#ExpMod|ExpMod]].
 
|-
 
| 11 || [[#IsDevelopment]] ||
 
 
|-
 
|-
| 12 || [[#GenerateSpecificAesKey]] || Wrapper for [[SMC#KeygenA|KeygenA]].
+
| 0 || [[#GetConfig]]
 
|-
 
|-
| 13 || [[#DecryptPrivk]] || Wrapper for [[SMC#DecryptExpModParamsWithXY|DecryptExpModParamsWithXY]].
+
| 1 || [[#ModularExponentiate]]
 
|-
 
|-
| 14 || [[#DecryptAesKey]] || Decrypts 0x10 bytes using AES ECB and uses [[SMC#SetKeyslotFromXY|SetKeyslotFromXY]] with fixed X and Y.
+
| 5 || [[#SetConfig]]
 
|-
 
|-
| 15 || [[#DecryptAesCtr]] || Wrapper for [[SMC#SymmetricCrypto|SymmetricCrypto]].
+
| 7 || [[#GenerateRandomBytes]]
 
|-
 
|-
| 16 || [[#ComputeCmac]] || Wrapper for [[SMC#CMAC|CMAC]].
+
| 11 || [[#IsDevelopment]]
 
|-
 
|-
| 17 || [[#DecryptImportPrivkForExpMod1]] || Wrapper for [[SMC#ImportParamsFor10WithXY|ImportParamsFor10WithXY]].
+
| 24 || [3.0.0+] [[#SetBootReason]]
 
|-
 
|-
| 18 || [[#ExpMod1]] || Wrapper for [[SMC#ExpModAndKeygenAndSealZ|ExpModAndKeygenAndSealZ]].
+
| 25 || [3.0.0+] [[#GetBootReason]]
|-
 
| 19 || [[#LoadRsaKey]] || Wrapper for [[SMC#SetKeyslotFromZ|SetKeyslotFromZ]].
 
|-
 
| 20 || [2.0.0+] [[#GenerateRsaKek]] || Wrapper for [[SMC#KeygenAndSealZ|KeygenAndSealZ]].
 
|-
 
| 21 || [2.0.0+] [[#LockAesEngine]] ||
 
|-
 
| 22 || [2.0.0+] [[#UnlockAesEngine]] ||
 
|-
 
| 23 || [2.0.0+] [[#GetSplWaitEvent]] ||
 
 
|}
 
|}
  
 
== GetConfig ==
 
== GetConfig ==
Takes a u32 ('''ConfigItem'''), and returns a u64 ('''ConfigVal''').
+
Wrapper for [[SMC#GetConfig|GetConfig SMC]].
 
 
{| class="wikitable" border="1"
 
|-
 
! ConfigItem || Name
 
|-
 
| 1 || DisableProgramVerification
 
|-
 
| 2 || MemoryConfiguration
 
|-
 
| 3 || Returns 0x2C?
 
|-
 
| 4 || Returns 0x02?
 
|-
 
| 5 || HardwareType (0=Icosa, 1=Copper)
 
|-
 
| 6 || IsRetail
 
|-
 
| 7 || IsRecoveryBoot
 
|-
 
| 8 || DeviceId (byte7 clear)
 
|-
 
| 9 || BootReason
 
|-
 
| 10 || MemoryArrange
 
|-
 
| 11 || IsDebugMode
 
|-
 
| 12 || KernelMemoryConfiguration
 
|-
 
| 13 || BatteryProfile
 
|}
 
 
 
 
 
[[PCV_services|PCV]] configures memory profiles based on id2.
 
{| class="wikitable" border="1"
 
|-
 
!  Platform
 
!  Version
 
!  Revision
 
!  id2
 
|-
 
|  "jetson-tx1"
 
|  "11_40800_01_V9.8.3_V1.6"
 
|  N/A
 
|  N/A
 
|-
 
|  "nx-abcb"
 
|  "10_40800_NoCfgVersion_V9.8.4_V1.6"
 
|  0
 
|  0
 
|-
 
|  "nx-abca2"
 
|  "10_40800_NoCfgVersion_V9.8.7_V1.6"
 
|  0
 
|  0 or 3
 
|-
 
|  "nx-abca2"
 
|  "10_40800_NoCfgVersion_V9.8.7_V1.6"
 
|  1
 
|  4
 
|-
 
|  "nx-abca2"
 
|  "10_40800_NoCfgVersion_V9.8.7_V1.6"
 
|  2
 
|  1
 
|-
 
|  "nx-abca2"
 
|  "10_40800_NoCfgVersion_V9.8.7_V1.6"
 
|  3
 
|  2
 
|-
 
|}
 
 
 
 
 
[[Process Manager services|PM]] checks id1 and if non-zero, calls fsp-pr SetEnabledProgramVerification(false).
 
 
 
[[NIM_services|NIM]] checks that id8 output must match the [[Settings_services|set:cal]] DeviceId with byte7 cleared, otherwise panic.
 
 
 
[3.0.0+] [[Loader services|RO]] checks id11, if set then skipping NRR rsa signatures is allowed.
 
  
Kernel uses id11 to determine behavior of svcBreak positive arguments. It will break instead of just force-exiting the process which is what happens on retail.
+
Takes an input u32 '''ConfigItem'''. Returns one or more output u64s '''ConfigValue'''.
  
Kernel reads id12 when setting up memory-related code. If bit0 is set, it will memset various allocated memory-regions with 0x58, 0x59, 0x5A ('X', 'Y', 'Z') instead of zero. This allows Nintendo devs to find uninitialized memory bugs. If bit17-16 is 0b01, the kernel assumes 6GB of DRAM instead of 4GB.
+
== ModularExponentiate ==
 +
Wrapper for [[SMC#ModularExponentiate|ModularExponentiate SMC]].
  
== UserExpMod ==
+
Takes an output type-0xA buffer '''DataOut''' and 3 input type-0x9 buffers '''DataIn''', '''ExpIn''' and '''ModIn'''.
Takes one type-10 (C descriptor) buffer ('''data_out_buf''') and 3 type-9 (X descriptor) buffers ('''data_in_buf''', '''exp_in_buf''' and '''mod_in_buf''').
 
  
 
Performs asymmetric crypto with user supplied modulus and exponent.
 
Performs asymmetric crypto with user supplied modulus and exponent.
  
 
== GenerateAesKek ==
 
== GenerateAesKek ==
Takes a 16-byte EKS ('''Encryption Key Source''') and two words ('''KeyGeneration''' and '''option''') as input.
+
Wrapper for [[SMC#GenerateAesKek|GenerateAesKek SMC]].
'''KeyGeneration''' ranges from 0 to 2.
 
  
Returns an hardware scrambled sealed KEK ('''Key Encryption Key''' used as '''key_x''').
+
Takes an input 16-byte '''KeySource''' and two input u32s '''Generation''' and '''Option'''. Returns an output 16-byte '''AccessKey'''.
  
 
== LoadAesKey ==
 
== LoadAesKey ==
Takes a u32 ('''keyslot''') and two 16-byte keys ('''key_x''' and '''key_y''').
+
Wrapper for [[SMC#LoadAesKey|LoadAesKey SMC]].
  
Sets the specified '''keyslot''' with a key generated from '''key_x''' and '''key_y'''.
+
Takes an input u32 '''Keyslot''' , an input 16-byte '''AccessKey''' and an input 16-byte '''KeySource'''.
  
[2.0.0+] Now verifies that the engine in use (0..3) is locked/owned by the current spl session, otherwise errors with 0xD21A. Previously engine was hardcoded to 0.
+
Sets the specified '''Keyslot''' with a key generated from '''AccessKey''' and '''KeySource'''.
 +
 
 +
[2.0.0+] Now verifies that the keyslot in use (0..3) is allocated by the current spl session, otherwise errors with 0xD21A. Previously, keyslot was hardcoded to 0.
  
 
== GenerateAesKey ==
 
== GenerateAesKey ==
Takes a 16-byte KEK ('''key_x''') and a 16-byte encrypted key ('''enc_key''').
+
Takes an input 16-byte '''AccessKey''' and an input 16-byte '''KeySource'''. Returns an output 16-byte '''AesKey'''.
  
Generates a new key by decrypting '''enc_key''' with a key generated from the supplied '''key_x''' and a fixed '''key_y'''.
+
Generates a new key by decrypting (AES-ECB) '''KeySource''' with a key generated from the supplied '''AccessKey''' and the key set with [[SMC#LoadAesKey|LoadAesKey SMC]].
  
[2.0.0+] Previously, it always used engine 0. Now it tries to allocate an engine to be used and returns 0xD01A if they're all busy. When the command is done, the engine is released.
+
[2.0.0+] Previously, it always used keyslot 0. Now it tries to allocate a keyslot to be used and returns 0xD01A if they're all busy. When the command is done, the keyslot is released.
  
 
== SetConfig ==
 
== SetConfig ==
Takes a u32 ('''ConfigItem''') and a u64 ('''ConfigVal''').
+
Wrapper for [[SMC#SetConfig|SetConfig SMC]].
  
{| class="wikitable" border="1"
+
Takes an input u32 '''ConfigItem''' and an input u64 '''ConfigValue'''.
|-
+
 
! ConfigItem || Name
+
Only '''ConfigItem''' 13 (IsChargerHiZModeEnabled) can be set.
|-
 
| 13 || BatteryProfile
 
|}
 
  
Any other '''ConfigItem''', besides 13, can't be set.
+
== ImportLotusKey ==
 +
Wrapper for [[SMC#DecryptAndImportLotusKey|DecryptAndImportLotusKey SMC]].
  
== DecryptImportPrivkForExpMod0 ==
+
Takes an input type-0x9 buffer '''DataIn''', an input 16-byte '''AccessKey''', an input 16-byte '''KeySource''' and an input u32 '''Version''' (0 for normal keys or 1 for extended keys).
Takes one type-9 (X descriptor) buffer ('''enc_privk_in_buf'''), a 16-byte KEK ('''key_x'''), a 16-byte key ('''key_y''') and a u32 ('''version''').
 
'''version''' is 0 or 1.
 
  
Decrypts '''enc_privk_in_buf''' with a key generated from '''key_x''' and '''key_y''' and imports it for later usage.
+
Decrypts '''DataIn''' with a key generated from '''AccessKey''' and '''KeySource''' and imports it for later usage.
  
== ExpMod0 ==
+
[5.0.0+] The '''Version''' argument was removed and this now calls the [[SMC#ReencryptDeviceUniqueData|ReencryptDeviceUniqueData SMC]] instead.
Takes one type-10 (C descriptor) buffer ('''data_out_buf''') and 3 type-9 (X descriptor) buffers ('''data_in_buf''', '''param0_in_buf''' and '''param1_in_buf''').
 
  
Decrypts '''data_in_buf''' into '''data_out_buf''' using the private key imported with [[#DecryptImportPrivkForExpMod0]] and the supplied buffers '''param0_in_buf''' and '''param1_in_buf'''.
+
== DecryptLotusMessage ==
 +
Takes 3 input type-0x9 buffers '''DataIn''', '''ModIn''' and '''LabelHashIn'''.
  
Returns and unknown u32.
+
Uses the [[SMC#ModularExponentiateByStorageKey|ModularExponentiateByStorageKey SMC]] to decrypt '''DataIn''' using the private key imported with [[#ImportLotusKey]] and the supplied '''ModIn''' and '''LabelHashIn'''.
  
 
== IsDevelopment ==
 
== IsDevelopment ==
No input params.
+
No input. Returns an output u8 bool.
 +
 
 +
Uses [[#GetConfig]] internally.
  
Uses [[#GetConfig]] internally with id=6. Returns true if output from that is 0, or if the SMC returned error 2.
+
== GenerateSpecificAesKey ==
 +
Wrapper for [[SMC#GenerateSpecificAesKey|GenerateSpecificAesKey SMC]].
  
Returns an u8 flag for whether the system is devunit. Output flag is 0 on retail.
+
Takes an input 16-byte '''KeySource''' and two input u32s '''Generation''' and '''Option'''. Returns an output 16-byte '''AesKey'''.
  
== GenerateSpecificAesKey ==
+
== DecryptDeviceUniqueData ==
Takes a 16-byte seed ('''key_seed''') and two words ('''KeyGeneration''' and '''option''') as input.
+
Wrapper for [[SMC#DecryptDeviceUniqueData|DecryptDeviceUniqueData SMC]].
'''KeyGeneration''' ranges from 0 to 2.
 
  
Returns an hardware scrambled (unsealed?) key ('''key_a''').
+
Takes an output type-0xA buffer '''DataOut''', an input type-0x9 '''DataIn''', an input 16-byte '''AccessKey''', an input 16-byte '''KeySource''' and an input u32 '''Version''' (0 for normal keys or 1 for extended keys).
  
== DecryptPrivk ==
+
Decrypts '''DataIn''' into '''DataOut''' with a key generated from '''AccessKey''' and '''KeySource'''.
Takes one type-10 (C descriptor) buffer ('''dec_privk_out_buf'''), one type-9 (X descriptor) buffer ('''enc_privk_in_buf'''), a 16-byte KEK ('''key_x'''), a 16-byte key ('''key_y''') and a u32 ('''version''').
 
'''version''' is 0 or 1.
 
  
Decrypts '''enc_privk_in_buf''' into '''dec_privk_out_buf''' with a key generated from '''key_x''' and '''key_y'''.
+
Used by [[SSL_services|SSL]] for TLS client-privk.
  
Used by [[SSL_services|SSL]]-sysmodule for TLS client-privk.
+
[5.0.0+] The '''Version''' argument was removed.
  
 
== DecryptAesKey ==
 
== DecryptAesKey ==
Takes a 16-byte encrypted key ('''enc_key''') and two words ('''KeyGeneration''' and '''option''') as input.
+
Takes an input 16-byte '''KeySource''' and two input u32s '''Generation''' and '''Option'''. Returns an output 16-byte '''AesKey'''.
'''KeyGeneration''' ranges from 0 to 2.
 
  
Decrypts '''enc_key''' with a key generated from fixed '''key_x''' and '''key_y''' and returns a 16-byte decrypted key ('''dec_key''').
+
Decrypts (AES-ECB) '''KeySource''' with a key set with [[SMC#LoadAesKey|LoadAesKey SMC]].
  
[2.0.0+] Introduced same engine allocation code as for [[#GenerateAesKey]].
+
[2.0.0+] Introduced same keyslot allocation code as for [[#GenerateAesKey]].
  
== DecryptAesCtr ==
+
== CryptAesCtr ==
Takes a type-0x46 (B descriptor) buffer ('''data_out_buf'''), a u32 ('''keyslot'''), a type-0x45 (A descriptor) buffer ('''data_in_buf''') and a 16-byte CTR ('''aes_ctr''').
+
Takes an output type-0x46 buffer '''DataOut''', an input u32 '''Keyslot''', an input type-0x45 buffer '''DataIn''' and an input 16-byte '''IvCtr'''.
  
Decrypts '''data_in_buf''' into '''data_out_buf''' using the key set in the specified '''keyslot'''.
+
Uses [[SMC#ComputeAes|ComputeAes SMC]] to decrypt '''DataIn''' into '''DataOut''' using the key set in the specified '''Keyslot'''.
  
[2.0.0+] Verifies the engine is locked by current session.
+
[2.0.0+] Verifies the keyslot was allocated by the current session.
  
 
== ComputeCmac ==
 
== ComputeCmac ==
Takes one type-9 (X descriptor) buffer ('''data_in_buf''') and a u32 ('''type?''').
+
Wrapper for [[SMC#ComputeCmac|ComputeCmac SMC]].
 +
 
 +
Takes an input type-0x9 buffer '''DataIn''' and an input u32 '''Keyslot'''. Returns an output 16-byte '''Cmac'''.
 +
 
 +
[2.0.0+] Verifies the keyslot was allocated by the current session.
 +
 
 +
== ImportEsKey ==
 +
Wrapper for [[SMC#DecryptAndImportEsDeviceKey|DecryptAndImportEsDeviceKey SMC]].
 +
 
 +
Takes an input type-0x9 buffer '''DataIn''', an input 16-byte '''AccessKey''', an input 16-byte '''KeySource''' and an input u32 '''Version''' (0 for normal keys or 1 for extended keys).
  
Returns a 16-byte CMAC calculated over '''data_in_buf'''.
+
Decrypts '''DataIn''' with a key generated from '''AccessKey''' and '''KeySource''' and imports it for later usage.
  
[2.0.0+] Verifies the engine is locked by current session.
+
[5.0.0+] The '''Version''' argument was removed and this now calls the [[SMC#ReencryptDeviceUniqueData|ReencryptDeviceUniqueData SMC]] instead.
  
== DecryptImportPrivkForExpMod1 ==
+
== UnwrapTitleKey ==
Takes one type-9 (X descriptor) buffer ('''enc_privk_in_buf'''), a 16-byte KEK ('''key_x'''), a 16-byte key ('''key_y''') and a u32 ('''version''').
+
Wrapper for [[SMC#PrepareEsDeviceUniqueKey|PrepareEsDeviceUniqueKey SMC]].
'''version''' is 0 or 1.
 
  
Decrypts '''enc_privk_in_buf''' with a key generated from '''key_x''' and '''key_y''' and imports it for later usage.
+
Takes an output type-0xA buffer '''DataOut''' and 3 input type-0x9 buffers '''DataIn''', '''ModIn''' and '''LabelHashIn'''. Returns an output u32 '''DataOutSize'''.
  
== ExpMod1 ==
+
[3.0.0+] Now takes an input u32 '''Generation'''.
Takes 3 type-9 (X descriptor) buffers ('''data_in_buf''', '''param0_in_buf''' and '''param1_in_buf''').
 
  
Decrypts '''data_in_buf''' using the private key imported with [[#DecryptImportPrivkForExpMod1]] and the supplied buffers '''param0_in_buf''' and '''param1_in_buf'''.
+
Decrypts '''DataIn''' into '''DataOut''' using the private key imported with [[#ImportEsKey]] and the supplied '''ModIn'''. Afterwards, verifies RSA-OAEP encoding using '''LabelHashIn'''.
 +
 
 +
== LoadTitleKey ==
 +
Wrapper for [[SMC#LoadPreparedAesKey|LoadPreparedAesKey SMC]].
 +
 
 +
Takes an input u32 '''Keyslot''' and an input 16-byte '''AccessKey'''.
 +
 
 +
[2.0.0+] Verifies the keyslot was allocated in the current session.
 +
 
 +
== UnwrapCommonTitleKey ==
 +
Wrapper for [[SMC#PrepareEsCommonKey|PrepareEsCommonKey SMC]].
 +
 
 +
Takes an input 16-byte '''KeySource'''. Returns an output 16-byte '''AccessKey'''.
 +
 
 +
[3.0.0+] Now takes an input u32 '''Generation'''.
 +
 
 +
== AllocateAesKeyslot ==
 +
Returns an output u32 '''Keyslot'''.
 +
 
 +
Returns error 0xD01A if all keyslots are taken.
 +
 
 +
== DeallocateAesKeySlot ==
 +
Takes an input u32 '''Keyslot'''.
 +
 
 +
Returns error 0xD21A if the keyslot wasn't allocated by current session.
 +
 
 +
== GetAesKeyslotAvailableEvent ==
 +
Returns an output event handle for synchronizing with the AES keyslots.
 +
 
 +
== SetBootReason ==
 +
Takes an input u32 '''BootReason'''.
 +
 
 +
[4.0.0+] Returns 0xD41A if a value has been previously set without being [[#GetBootReason|gotten]].
 +
 
 +
== GetBootReason ==
 +
Returns an output u32 '''BootReason'''.
 +
 
 +
[4.0.0+] Returns 0xD61A if a value has not previously been set and unsets the value after getting it.
 +
 
 +
== LoadPreparedAesKey ==
 +
Same as [[#LoadTitleKey|LoadTitleKey]].
 +
 
 +
= spl:mig =
 +
This is "nn::spl::detail::ICryptoInterface".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#GetConfig]]
 +
|-
 +
| 1 || [[#ModularExponentiate]]
 +
|-
 +
| 5 || [[#SetConfig]]
 +
|-
 +
| 7 || [[#GenerateRandomBytes]]
 +
|-
 +
| 11 || [[#IsDevelopment]]
 +
|-
 +
| 24 || [3.0.0+] [[#SetBootReason]]
 +
|-
 +
| 25 || [3.0.0+] [[#GetBootReason]]
 +
|-
 +
| 2 || [[#GenerateAesKek]]
 +
|-
 +
| 3 || [[#LoadAesKey]]
 +
|-
 +
| 4 || [[#GenerateAesKey]]
 +
|-
 +
| 14 || [[#DecryptAesKey]]
 +
|-
 +
| 15 || [[#CryptAesCtr]]
 +
|-
 +
| 16 || [[#ComputeCmac]]
 +
|-
 +
| 21 || [2.0.0+] [[#AllocateAesKeyslot]]
 +
|-
 +
| 22 || [2.0.0+] [[#DeallocateAesKeySlot]]
 +
|-
 +
| 23 || [2.0.0+] [[#GetAesKeyslotAvailableEvent]]
 +
|}
  
Generates and returns a 16-byte key ('''key_z''').
+
= spl:fs =
 +
This is "nn::spl::detail::IFsInterface".
  
== LoadRsaKey ==
+
{| class="wikitable" border="1"
Takes a u32 ('''keyslot''') and a 16-byte key ('''key_z''').
+
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#GetConfig]]
 +
|-
 +
| 1 || [[#ModularExponentiate]]
 +
|-
 +
| 5 || [[#SetConfig]]
 +
|-
 +
| 7 || [[#GenerateRandomBytes]]
 +
|-
 +
| 11 || [[#IsDevelopment]]
 +
|-
 +
| 24 || [3.0.0+] [[#SetBootReason]]
 +
|-
 +
| 25 || [3.0.0+] [[#GetBootReason]]
 +
|-
 +
| 2 || [[#GenerateAesKek]]
 +
|-
 +
| 3 || [[#LoadAesKey]]
 +
|-
 +
| 4 || [[#GenerateAesKey]]
 +
|-
 +
| 14 || [[#DecryptAesKey]]
 +
|-
 +
| 15 || [[#CryptAesCtr]]
 +
|-
 +
| 16 || [[#ComputeCmac]]
 +
|-
 +
| 21 || [2.0.0+] [[#AllocateAesKeyslot]]
 +
|-
 +
| 22 || [2.0.0+] [[#DeallocateAesKeySlot]]
 +
|-
 +
| 23 || [2.0.0+] [[#GetAesKeyslotAvailableEvent]]
 +
|-
 +
| 9 || [[#ImportLotusKey]]
 +
|-
 +
| 10 || [[#DecryptLotusMessage]]
 +
|-
 +
| 12 || [[#GenerateSpecificAesKey]]
 +
|-
 +
| 19 || [[#LoadTitleKey]]
 +
|-
 +
| 31 || [5.0.0+] GetPackage2Hash
 +
|}
  
Sets the specified '''keyslot''' with a key generated from '''key_z'''.
+
= spl:ssl =
 +
This is "nn::spl::detail::ISslInterface".
  
[2.0.0+] Verifies the engine is locked by current session.
+
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#GetConfig]]
 +
|-
 +
| 1 || [[#ModularExponentiate]]
 +
|-
 +
| 5 || [[#SetConfig]]
 +
|-
 +
| 7 || [[#GenerateRandomBytes]]
 +
|-
 +
| 11 || [[#IsDevelopment]]
 +
|-
 +
| 24 || [3.0.0+] [[#SetBootReason]]
 +
|-
 +
| 25 || [3.0.0+] [[#GetBootReason]]
 +
|-
 +
| 2 || [[#GenerateAesKek]]
 +
|-
 +
| 3 || [[#LoadAesKey]]
 +
|-
 +
| 4 || [[#GenerateAesKey]]
 +
|-
 +
| 14 || [[#DecryptAesKey]]
 +
|-
 +
| 15 || [[#CryptAesCtr]]
 +
|-
 +
| 16 || [[#ComputeCmac]]
 +
|-
 +
| 21 || [2.0.0+] [[#AllocateAesKeyslot]]
 +
|-
 +
| 22 || [2.0.0+] [[#DeallocateAesKeySlot]]
 +
|-
 +
| 23 || [2.0.0+] [[#GetAesKeyslotAvailableEvent]]
 +
|-
 +
| 13 || [[#DecryptDeviceUniqueData]]
 +
|-
 +
| 26 || [5.0.0+] DecryptAndStoreSslClientCertKey
 +
|-
 +
| 27 || [5.0.0+] ModularExponentiateWithSslClientCertKey
 +
|}
  
== GenerateRsaKek ==
+
= spl:es =
Takes a 16-byte EKS ('''Encryption Key Source''').
+
This is "nn::spl::detail::IEsInterface".
  
Returns an hardware scrambled sealed KEK ('''Key Encryption Key''' used as '''key_z''').
+
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#GetConfig]]
 +
|-
 +
| 1 || [[#ModularExponentiate]]
 +
|-
 +
| 5 || [[#SetConfig]]
 +
|-
 +
| 7 || [[#GenerateRandomBytes]]
 +
|-
 +
| 11 || [[#IsDevelopment]]
 +
|-
 +
| 24 || [3.0.0+] [[#SetBootReason]]
 +
|-
 +
| 25 || [3.0.0+] [[#GetBootReason]]
 +
|-
 +
| 2 || [[#GenerateAesKek]]
 +
|-
 +
| 3 || [[#LoadAesKey]]
 +
|-
 +
| 4 || [[#GenerateAesKey]]
 +
|-
 +
| 14 || [[#DecryptAesKey]]
 +
|-
 +
| 15 || [[#CryptAesCtr]]
 +
|-
 +
| 16 || [[#ComputeCmac]]
 +
|-
 +
| 21 || [2.0.0+] [[#AllocateAesKeyslot]]
 +
|-
 +
| 22 || [2.0.0+] [[#DeallocateAesKeySlot]]
 +
|-
 +
| 23 || [2.0.0+] [[#GetAesKeyslotAvailableEvent]]
 +
|-
 +
| 13 || [[#DecryptDeviceUniqueData]]
 +
|-
 +
| 17 || [[#ImportEsKey]]
 +
|-
 +
| 18 || [[#UnwrapTitleKey]]
 +
|-
 +
| 20 || [2.0.0+] [[#PrepareEsCommonKey]]
 +
|-
 +
| 28 || [5.0.0+] DecryptAndStoreDrmDeviceCertKey
 +
|-
 +
| 29 || [5.0.0+] ModularExponentiateWithDrmDeviceCertKey
 +
|-
 +
| 31 || [6.0.0+] PrepareEsArchiveKey
 +
|-
 +
| 32 || [6.0.0+] [[#LoadPreparedAesKey]]
 +
|-
 +
| 33 || [18.0.0+]
 +
|}
  
== LockAesEngine ==
+
= spl:manu =
Returns the id of the engine that was locked, or 0xD01A if all engines are busy. You need to lock an engine before using AES functions.
+
This is "nn::spl::detail::IManuInterface".
  
== UnlockAesEngine ==
+
{| class="wikitable" border="1"
Takes a single u32 and unlocks the engine with that id. It must be owned by current session otherwise 0xD21A will be returned.
+
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#GetConfig]]
 +
|-
 +
| 1 || [[#ModularExponentiate]]
 +
|-
 +
| 5 || [[#SetConfig]]
 +
|-
 +
| 7 || [[#GenerateRandomBytes]]
 +
|-
 +
| 11 || [[#IsDevelopment]]
 +
|-
 +
| 24 || [3.0.0+] [[#SetBootReason]]
 +
|-
 +
| 25 || [3.0.0+] [[#GetBootReason]]
 +
|-
 +
| 2 || [[#GenerateAesKek]]
 +
|-
 +
| 3 || [[#LoadAesKey]]
 +
|-
 +
| 4 || [[#GenerateAesKey]]
 +
|-
 +
| 14 || [[#DecryptAesKey]]
 +
|-
 +
| 15 || [[#CryptAesCtr]]
 +
|-
 +
| 16 || [[#ComputeCmac]]
 +
|-
 +
| 21 || [2.0.0+] [[#AllocateAesKeyslot]]
 +
|-
 +
| 22 || [2.0.0+] [[#DeallocateAesKeySlot]]
 +
|-
 +
| 23 || [2.0.0+] [[#GetAesKeyslotAvailableEvent]]
 +
|-
 +
| 13 || [[#DecryptDeviceUniqueData]]
 +
|-
 +
| 30 || [5.0.0+] ReencryptDeviceUniqueData
 +
|}
  
== GetSplWaitEvent ==
+
[[Category:Services]]
Returns an event handle for synchronizing with the locked AES engine.
 

Latest revision as of 20:21, 26 March 2024

SPL ("Secure Platform services") is responsible for handling all cryptographic operations within the system and relaying them to the Secure Monitor when necessary.

During [1.0.0-3.0.2], the only existing services were "csrng" and "spl:". However, in [4.0.0+] the "spl:" service was refactored and split into new services with different permission levels. Each service exposes the IPC command list differently in order to prevent cryptographic operations to take place in the wrong context.

In [2.0.0+] where previously only one AES keyslot was used, there is now support for 4 of them and when the session closes, all allocated AES keyslots are automatically freed.

csrng

This is "nn::spl::detail::IRandomInterface".

Cmd Name
0 #GenerateRandomBytes

GenerateRandomBytes

Takes an output type-0xA buffer and fills it with random data from GenerateRandomBytes SMC. Same command for "spl:" and "csrng" services, except for buffer-type.

spl:

This is "nn::spl::detail::IGeneralInterface".

Cmd Name
0 #GetConfig
1 #ModularExponentiate
5 #SetConfig
7 #GenerateRandomBytes
11 #IsDevelopment
24 [3.0.0+] #SetBootReason
25 [3.0.0+] #GetBootReason

GetConfig

Wrapper for GetConfig SMC.

Takes an input u32 ConfigItem. Returns one or more output u64s ConfigValue.

ModularExponentiate

Wrapper for ModularExponentiate SMC.

Takes an output type-0xA buffer DataOut and 3 input type-0x9 buffers DataIn, ExpIn and ModIn.

Performs asymmetric crypto with user supplied modulus and exponent.

GenerateAesKek

Wrapper for GenerateAesKek SMC.

Takes an input 16-byte KeySource and two input u32s Generation and Option. Returns an output 16-byte AccessKey.

LoadAesKey

Wrapper for LoadAesKey SMC.

Takes an input u32 Keyslot , an input 16-byte AccessKey and an input 16-byte KeySource.

Sets the specified Keyslot with a key generated from AccessKey and KeySource.

[2.0.0+] Now verifies that the keyslot in use (0..3) is allocated by the current spl session, otherwise errors with 0xD21A. Previously, keyslot was hardcoded to 0.

GenerateAesKey

Takes an input 16-byte AccessKey and an input 16-byte KeySource. Returns an output 16-byte AesKey.

Generates a new key by decrypting (AES-ECB) KeySource with a key generated from the supplied AccessKey and the key set with LoadAesKey SMC.

[2.0.0+] Previously, it always used keyslot 0. Now it tries to allocate a keyslot to be used and returns 0xD01A if they're all busy. When the command is done, the keyslot is released.

SetConfig

Wrapper for SetConfig SMC.

Takes an input u32 ConfigItem and an input u64 ConfigValue.

Only ConfigItem 13 (IsChargerHiZModeEnabled) can be set.

ImportLotusKey

Wrapper for DecryptAndImportLotusKey SMC.

Takes an input type-0x9 buffer DataIn, an input 16-byte AccessKey, an input 16-byte KeySource and an input u32 Version (0 for normal keys or 1 for extended keys).

Decrypts DataIn with a key generated from AccessKey and KeySource and imports it for later usage.

[5.0.0+] The Version argument was removed and this now calls the ReencryptDeviceUniqueData SMC instead.

DecryptLotusMessage

Takes 3 input type-0x9 buffers DataIn, ModIn and LabelHashIn.

Uses the ModularExponentiateByStorageKey SMC to decrypt DataIn using the private key imported with #ImportLotusKey and the supplied ModIn and LabelHashIn.

IsDevelopment

No input. Returns an output u8 bool.

Uses #GetConfig internally.

GenerateSpecificAesKey

Wrapper for GenerateSpecificAesKey SMC.

Takes an input 16-byte KeySource and two input u32s Generation and Option. Returns an output 16-byte AesKey.

DecryptDeviceUniqueData

Wrapper for DecryptDeviceUniqueData SMC.

Takes an output type-0xA buffer DataOut, an input type-0x9 DataIn, an input 16-byte AccessKey, an input 16-byte KeySource and an input u32 Version (0 for normal keys or 1 for extended keys).

Decrypts DataIn into DataOut with a key generated from AccessKey and KeySource.

Used by SSL for TLS client-privk.

[5.0.0+] The Version argument was removed.

DecryptAesKey

Takes an input 16-byte KeySource and two input u32s Generation and Option. Returns an output 16-byte AesKey.

Decrypts (AES-ECB) KeySource with a key set with LoadAesKey SMC.

[2.0.0+] Introduced same keyslot allocation code as for #GenerateAesKey.

CryptAesCtr

Takes an output type-0x46 buffer DataOut, an input u32 Keyslot, an input type-0x45 buffer DataIn and an input 16-byte IvCtr.

Uses ComputeAes SMC to decrypt DataIn into DataOut using the key set in the specified Keyslot.

[2.0.0+] Verifies the keyslot was allocated by the current session.

ComputeCmac

Wrapper for ComputeCmac SMC.

Takes an input type-0x9 buffer DataIn and an input u32 Keyslot. Returns an output 16-byte Cmac.

[2.0.0+] Verifies the keyslot was allocated by the current session.

ImportEsKey

Wrapper for DecryptAndImportEsDeviceKey SMC.

Takes an input type-0x9 buffer DataIn, an input 16-byte AccessKey, an input 16-byte KeySource and an input u32 Version (0 for normal keys or 1 for extended keys).

Decrypts DataIn with a key generated from AccessKey and KeySource and imports it for later usage.

[5.0.0+] The Version argument was removed and this now calls the ReencryptDeviceUniqueData SMC instead.

UnwrapTitleKey

Wrapper for PrepareEsDeviceUniqueKey SMC.

Takes an output type-0xA buffer DataOut and 3 input type-0x9 buffers DataIn, ModIn and LabelHashIn. Returns an output u32 DataOutSize.

[3.0.0+] Now takes an input u32 Generation.

Decrypts DataIn into DataOut using the private key imported with #ImportEsKey and the supplied ModIn. Afterwards, verifies RSA-OAEP encoding using LabelHashIn.

LoadTitleKey

Wrapper for LoadPreparedAesKey SMC.

Takes an input u32 Keyslot and an input 16-byte AccessKey.

[2.0.0+] Verifies the keyslot was allocated in the current session.

UnwrapCommonTitleKey

Wrapper for PrepareEsCommonKey SMC.

Takes an input 16-byte KeySource. Returns an output 16-byte AccessKey.

[3.0.0+] Now takes an input u32 Generation.

AllocateAesKeyslot

Returns an output u32 Keyslot.

Returns error 0xD01A if all keyslots are taken.

DeallocateAesKeySlot

Takes an input u32 Keyslot.

Returns error 0xD21A if the keyslot wasn't allocated by current session.

GetAesKeyslotAvailableEvent

Returns an output event handle for synchronizing with the AES keyslots.

SetBootReason

Takes an input u32 BootReason.

[4.0.0+] Returns 0xD41A if a value has been previously set without being gotten.

GetBootReason

Returns an output u32 BootReason.

[4.0.0+] Returns 0xD61A if a value has not previously been set and unsets the value after getting it.

LoadPreparedAesKey

Same as LoadTitleKey.

spl:mig

This is "nn::spl::detail::ICryptoInterface".

Cmd Name
0 #GetConfig
1 #ModularExponentiate
5 #SetConfig
7 #GenerateRandomBytes
11 #IsDevelopment
24 [3.0.0+] #SetBootReason
25 [3.0.0+] #GetBootReason
2 #GenerateAesKek
3 #LoadAesKey
4 #GenerateAesKey
14 #DecryptAesKey
15 #CryptAesCtr
16 #ComputeCmac
21 [2.0.0+] #AllocateAesKeyslot
22 [2.0.0+] #DeallocateAesKeySlot
23 [2.0.0+] #GetAesKeyslotAvailableEvent

spl:fs

This is "nn::spl::detail::IFsInterface".

Cmd Name
0 #GetConfig
1 #ModularExponentiate
5 #SetConfig
7 #GenerateRandomBytes
11 #IsDevelopment
24 [3.0.0+] #SetBootReason
25 [3.0.0+] #GetBootReason
2 #GenerateAesKek
3 #LoadAesKey
4 #GenerateAesKey
14 #DecryptAesKey
15 #CryptAesCtr
16 #ComputeCmac
21 [2.0.0+] #AllocateAesKeyslot
22 [2.0.0+] #DeallocateAesKeySlot
23 [2.0.0+] #GetAesKeyslotAvailableEvent
9 #ImportLotusKey
10 #DecryptLotusMessage
12 #GenerateSpecificAesKey
19 #LoadTitleKey
31 [5.0.0+] GetPackage2Hash

spl:ssl

This is "nn::spl::detail::ISslInterface".

Cmd Name
0 #GetConfig
1 #ModularExponentiate
5 #SetConfig
7 #GenerateRandomBytes
11 #IsDevelopment
24 [3.0.0+] #SetBootReason
25 [3.0.0+] #GetBootReason
2 #GenerateAesKek
3 #LoadAesKey
4 #GenerateAesKey
14 #DecryptAesKey
15 #CryptAesCtr
16 #ComputeCmac
21 [2.0.0+] #AllocateAesKeyslot
22 [2.0.0+] #DeallocateAesKeySlot
23 [2.0.0+] #GetAesKeyslotAvailableEvent
13 #DecryptDeviceUniqueData
26 [5.0.0+] DecryptAndStoreSslClientCertKey
27 [5.0.0+] ModularExponentiateWithSslClientCertKey

spl:es

This is "nn::spl::detail::IEsInterface".

Cmd Name
0 #GetConfig
1 #ModularExponentiate
5 #SetConfig
7 #GenerateRandomBytes
11 #IsDevelopment
24 [3.0.0+] #SetBootReason
25 [3.0.0+] #GetBootReason
2 #GenerateAesKek
3 #LoadAesKey
4 #GenerateAesKey
14 #DecryptAesKey
15 #CryptAesCtr
16 #ComputeCmac
21 [2.0.0+] #AllocateAesKeyslot
22 [2.0.0+] #DeallocateAesKeySlot
23 [2.0.0+] #GetAesKeyslotAvailableEvent
13 #DecryptDeviceUniqueData
17 #ImportEsKey
18 #UnwrapTitleKey
20 [2.0.0+] #PrepareEsCommonKey
28 [5.0.0+] DecryptAndStoreDrmDeviceCertKey
29 [5.0.0+] ModularExponentiateWithDrmDeviceCertKey
31 [6.0.0+] PrepareEsArchiveKey
32 [6.0.0+] #LoadPreparedAesKey
33 [18.0.0+]

spl:manu

This is "nn::spl::detail::IManuInterface".

Cmd Name
0 #GetConfig
1 #ModularExponentiate
5 #SetConfig
7 #GenerateRandomBytes
11 #IsDevelopment
24 [3.0.0+] #SetBootReason
25 [3.0.0+] #GetBootReason
2 #GenerateAesKek
3 #LoadAesKey
4 #GenerateAesKey
14 #DecryptAesKey
15 #CryptAesCtr
16 #ComputeCmac
21 [2.0.0+] #AllocateAesKeyslot
22 [2.0.0+] #DeallocateAesKeySlot
23 [2.0.0+] #GetAesKeyslotAvailableEvent
13 #DecryptDeviceUniqueData
30 [5.0.0+] ReencryptDeviceUniqueData