Difference between revisions of "PSC services"

From Nintendo Switch Brew
Jump to navigation Jump to search
Line 625: Line 625:
 
| 1 ||
 
| 1 ||
 
|}
 
|}
 +
 +
== Cmd0 ==
 +
Takes an input u32 '''InsID'''. Returns an u64.
 +
 +
== Cmd1 ==
 +
Takes an input u32 '''InsID''' and an input u64 (unused, official software passes struct pointer). Returns an output Event handle with autoclear disabled.
  
 
= ins:s =
 
= ins:s =

Revision as of 18:14, 12 September 2019

PSC (Power State Control) provides services related to power state changes in the system.

Concept

psc:m allows a process to register a module that depends on power management in some way. A client calls GetPmModule to receive an IPmModule (Power Managed Module), and then calls IPmModule->Initialize(module_id, module_dependency_list) where module_id is the ModuleId enum member for the client, and the dependency list is an array of module IDs for the modules that this depends on. Initialize() returns an event handle that the client can wait on to be notified of a power state change.

psc:c allows a module to the power state controller for the system (in practice, AM is the only client to the controller). IPmControl->DispatchRequest() is used notify all IPmModules of a state change.

For example, FS registers itself as an IPmModule with dependencies on pinmux, gpio, pcv, tma, and initializes the SD card once those dependencies have registered..

It then does (basically) the following pseudocode (actual code located at .text + 0xB2DB0 in 6.0.0 FS):

   while (true) {
       Fs_IPmModule->WaitSignaled();
       
       Fs_IPmModule->GetRequest(&state);
       switch (state) {
           case WakingUp:
               /* hardware devices are woken up here */
           case GoingToSleep:
               /* hardware devices are put to sleep here */
           case ShuttingDown:
               /* hardware devices are turned off here */
       }
       
       Fs_IPmModule->Acknowledge(state);
   }

psc:c

This is "nn::psc::sf::IPmControl".

Cmd Name
0 Initialize
1 DispatchRequest
2 GetResult
3 GetState
4 Cancel
5 [1.0.0-6.2.0] PrintModuleInformation
6 GetModuleInformation
10 [9.0.0+]
11 [9.0.0+]

psc:m

This is "nn::psc::sf::IPmService".

Cmd Name Notes
0 GetPmModule Returns an #IPmModule.

IPmModule

This is "nn::psc::sf::IPmModule".

Cmd Name
0 Initialize
1 GetRequest
2 Acknowledge
3 Finalize
4 [5.1.0+] AcknowledgeEx

psc:l

This was added with [9.0.0+].

Cmd Name
0
1
2
3
4

srepo:u, srepo:a

These are "nn::srepo::detail::ipc::ISrepoService".

These were added with [5.0.0+].

Cmd Name
10100
10101 [6.0.0+]
10200 [6.0.0+]
10201 [6.0.0+]
11000 [6.0.0+]
11001 [6.0.0+]
11002 [6.0.0+]
11003 [6.0.0+]
11004 [6.0.0+]
11100 [6.0.0+]
11200 [6.0.0+]
11300 [6.0.0+]
11400 [6.0.0+]
11500 [6.0.0+]
11600 [6.0.0+]
11601 [6.0.0+]
11602 [6.0.0+]
11700 [6.0.0+]
11800 [6.0.0+]
11801 [6.0.0+]
11810 [8.0.0+]
11811 [8.0.0+]
12000 [8.0.0+]
12001 [8.0.0+]
13000 [8.0.0+]
13001 [8.0.0+]
20100
20200
20300 [6.0.0+]
20400 [6.0.0+]
20401 [6.0.0+]
20402 [7.0.0+]
20500 [8.0.0+]

Cmd13000

Takes a type-0x5 input buffer, no output.

[9.0.0+] No input, returns a total of 0xC-bytes of output, an #IUnknown0, and a handle.

IUnknown0

Added with [9.0.0+].

Cmd Name
0

Cmd0: no input, returns a total of 8-bytes of output.

ovln:rcv

This is "nn::ovln::IReceiverService".

Cmd Name
0 OpenReceiver

IReceiver

This is "nn::ovln::IReceiver".

Cmd Name
0 AddSource
1 RemoveSource
2 GetReceiveEventHandle
3 Receive
4 ReceiveWithTick

ovln:snd

This is "nn::ovln::ISenderService".

Cmd Name
0 OpenSender

ISender

This is "nn::ovln::ISender".

Cmd Name
0 Send
1 GetUnreceivedMessageCount

time:su

This is "nn::timesrv::detail::service::ITimeServiceManager".

This was added with [9.0.0+].

Cmd Name
0
5
6
9
10
11
12
13
14
15
50
51
52
60
100
200
201
202

time:al

This is "nn::timesrv::detail::service::IAlarmService".

This was added with [9.0.0+].

Cmd Name
0
1

Cmd0/cmd1: no input, returns an #ISteadyClockAlarm.

ISteadyClockAlarm

This is "nn::timesrv::detail::service::ISteadyClockAlarm".

This was added with [9.0.0+].

Cmd Name
0
1
2
3
10
11

Cmd10

Opens a session for psc:l and returns it's interface.

time:m

This is "nn::timesrv::detail::service::IPowerStateRequestHandler".

This was added with [9.0.0+].

Cmd Name
0
1

time:s, time:p

These are "nn::timesrv::detail::service::IStaticService".

These were added with [9.0.0+].

Cmd Name Notes
0 GetStandardUserSystemClock Returns an #ISystemClock.
1 GetStandardNetworkSystemClock Returns an #ISystemClock.
2 GetStandardSteadyClock Returns an #ISteadyClock.
3 GetTimeZoneService Returns an #ITimeZoneService.
4 GetStandardLocalSystemClock Returns an #ISystemClock.
5 [4.0.0+] GetEphemeralNetworkSystemClock Returns an #ISystemClock.
20 [6.0.0+] GetSharedMemoryNativeHandle
30 [6.0.0-8.1.0] GetStandardNetworkClockOperationEventReadableHandle
31 [6.0.0-8.1.0] GetEphemeralNetworkClockOperationEventReadableHandle
50 [4.0.0+] SetStandardSteadyClockInternalOffset
51 [9.0.0+] GetStandardSteadyClockRtcValue
100 IsStandardUserSystemClockAutomaticCorrectionEnabled
101 SetStandardUserSystemClockAutomaticCorrectionEnabled
102 [5.0.0+] GetStandardUserSystemClockInitialYear
200 [3.0.0+] IsStandardNetworkSystemClockAccuracySufficient
201 [6.0.0+] GetStandardUserSystemClockAutomaticCorrectionUpdatedTime
300 [4.0.0+] CalculateMonotonicSystemClockBaseTimePoint
400 [4.0.0+] GetClockSnapshot
401 [4.0.0+] GetClockSnapshotFromSystemClockContext
500 [4.0.0+] CalculateStandardUserSystemClockDifferenceByUser
501 [4.0.0+] CalculateSpanBetween

ISteadyClock

This is "nn::timesrv::detail::service::ISteadyClock".

Cmd Name Notes
0 GetCurrentTimePoint No input, returns an output #SteadyClockTimePoint.
2 GetTestOffset No input, returns an output #TimeSpanType.
3 SetTestOffset Takes an input #TimeSpanType, no output.
100 [2.0.0+] GetRtcValue No input, returns an output s64.
101 [2.0.0+] IsRtcResetDetected No input, returns an output u8 bool.
102 [2.0.0+] GetSetupResultValue No input, returns an output u32.
200 [3.0.0+] GetInternalOffset No input, returns an output #TimeSpanType.
201 [3.0.0-3.0.2] SetInternalOffset Takes an input #TimeSpanType, no output.

SteadyClockTimePoint

Offset Size Description
0x0 0x8 A u64 representing a point in time.
0x8 0x10 An ID representing the clock source.

This is a 0x18-byte struct.

TimeSpanType

This is an u64.

ISystemClock

This is "nn::timesrv::detail::service::ISystemClock".

Cmd Name Notes
0 GetCurrentTime Returns an output #PosixTime.
1 SetCurrentTime Takes an input #PosixTime.
2 GetSystemClockContext Returns an output #SystemClockContext.
3 SetSystemClockContext Takes an input #SystemClockContext.
4 [9.0.0+] GetOperationEventReadableHandle

PosixTime

This is an s64 for UTC POSIX time.

SystemClockContext

This is an 0x20-byte struct.

Offset Size Description
0x0 0x8 a #PosixTime representing the system clock epoch.
0x8 0x18 a #SteadyClockTimePoint

ITimeZoneService

This is "nn::timesrv::detail::service::ITimeZoneService".

Cmd Name Notes
0 GetDeviceLocationName No input, returns an output #LocationName.
1 SetDeviceLocationName Takes an input #LocationName, no output.
2 GetTotalLocationNameCount No input, returns an output s32.
3 LoadLocationNameList
4 LoadTimeZoneRule Takes an input #LocationName and a type-0x16 output buffer for #TimeZoneRule, no output.
5 [2.0.0+] GetTimeZoneRuleVersion No input, returns an output #TimeZoneRuleVersion.
6 [5.0.0+] GetDeviceLocationNameAndUpdatedTime
7 [9.0.0+] SetDeviceLocationNameWithTimeZoneRule
8 [9.0.0+] ParseTimeZoneBinary
20 [9.0.0+] GetDeviceLocationNameOperationEventReadableHandle
100 ToCalendarTime Takes an input #PosixTime and a type-0x15 input buffer for #TimeZoneRule, returns an output #CalendarTime and #CalendarAdditionalInfo.
101 ToCalendarTimeWithMyRule Takes an input #PosixTime, returns an output #CalendarTime and #CalendarAdditionalInfo.
201 ToPosixTime Takes an input #CalendarTime, a type-0x15 input buffer for #TimeZoneRule, an type-0xA output buffer for #PosixTime array, and returns an output s32.
202 ToPosixTimeWithMyRule Takes an input #CalendarTime, an type-0xA output buffer for #PosixTime array, and returns an output s32.

LoadLocationNameList

Takes an input s32 LocationName_index and a type-0x6 output buffer for #LocationName, returns an output s32 for total output entries.

LocationName

This contains a TimeZone location string with a max size of 0x24 bytes.

TimeZoneRule

This is an 0x4000-byte struct. Official sw uses fixed-size 0x4000 for the buffer size with the above commands.

This is loaded from the TimeZoneBinary title with the specified LocationName under the zoneinfo/ directory, the content is then converted into this TimeZoneRule structure.

The files contained under zoneinfo/ directory are Tzif2 files without Tzif1 header and data at the begining of them (see RFC8536 for more information).

The conversion of a Tzif2 file to a TimeZoneRule structure is based on tz database code with some custom modifications (Leap seconds aren't handled, no usage of "posixrules" and Tzif1 support stripped out).

Offset Size Description
0x0 0x4 timecnt
0x4 0x4 typecnt
0x8 0x4 charcnt
0xC 0x1 goback
0xD 0x1 goahead
0xE 0x2 Padding
0x10 0x8 * 1000 ats
0x1f50 0x1 * 1000 types
0x2338 0x10 * 128 ttis (time type information), struct ttinfo[1000]
0x2b38 0x1 * 512 chars
0x2d38 0x4 defaulttype
0x2d3c 0x12c4 Reserved / Unused

ttinfo

This is an 0x10-byte struct. Represent a Time Type Information used in #TimeZoneRule.

Offset Size Description
0x0 0x4 tt_gmtoff
0x4 0x1 tt_isdst
0x5 0x3 Padding
0x8 0x4 tt_abbrind
0xC 0x1 tt_ttisstd
0xD 0x1 tt_ttisgmt
0xE 0x2 Padding

TimeZoneRuleVersion

This is an u128.

CalendarTime

Offset Size Description
0x0 0x2 Year
0x2 0x1 Month
0x3 0x1 Day
0x4 0x1 Hour
0x5 0x1 Minute
0x6 0x1 Second
0x7 0x1 Padding / unknown?

This is an 0x8-byte struct.

CalendarAdditionalInfo

Offset Size Description
0x0 0x4 0-based day-of-week.
0x4 0x4 0-based day-of-year.
0x8 0x8 Timezone name string.
0x10 0x4 0 = no DST, 1 = DST.
0x14 0x4 s32 seconds relative to UTC for this timezone.

This is an 0x18-byte struct. This stores timezone info.

ins:r

This is "nn::ins::IReceiverManager".

This was added with [9.0.0+].

Cmd Name
0
1

Cmd0

Takes an input u32 InsID. Returns an u64.

Cmd1

Takes an input u32 InsID and an input u64 (unused, official software passes struct pointer). Returns an output Event handle with autoclear disabled.

ins:s

This is "nn::ins::ISenderManager".

This was added with [9.0.0+].

Cmd Name
0 #Send

Send

Takes an input u32 SenderID and an input u64 (unused, official software passes struct pointer). Returns an output Event handle autoclear disabled.

PSC Module IDs

ID Module
0x03
0x04 USB
0x05
0x07 Pcv
0x08 Pcv:Imm
0x09 Gpio
0x0A Pinmux
0x0B Uart
0x0C I2c
0x0D I2c:Pcv
0x0E Sasbus
0x0F Pwm
0x10
0x13 PCIe
0x14 Backlight
0x15 Nvnflinger
0x18 nn::psc::PmModuleId_Hid
0x1B
0x1C Audio
0x1E
0x1F Bluetooth
0x20 Bpc
0x21 Ptm
0x23 nn::psc::PmModuleId_Nfc
0x24 Ppc
0x25
0x26 Nifm
0x28 Npns
0x29 nn::psc::PmModuleId_Lm
0x2A Bcat
0x2B Time
0x2C Pctl
0x2D Erpt
0x2E Eupld
0x2F Friend
0x30 Glue
0x31 Account
0x32 SasBus
0x65 NV

Power Management States

ID Name Description
Awake 0 Everything is awake.
ReadyAwaken 1 Preparing to transition to awake.
ReadySleep 2 Preparing to transition to sleep.
ReadySleepCritical 3 Critical services are ready to sleep.
ReadyAwakenCritical 4 Critical services are ready to wake up.
ReadyShutdown 5 Preparing to transition to shutdown.