2,782
edits
Changes
Jump to navigation
Jump to search
Line 22:
Line 22: − + − + − + − + − + − + + + + + + Line 44:
Line 49: − + + + + + + + + + + + + + + + + + + + + + + + − + − + − + − + − GetExternalRtcValue / SetExternalRtcValue directly accesses the max77620_rtc0 device.+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 118:
Line 173: − + − + − + − + − === Power Switch / Clocking / Reset ===+ − {| class="wikitable" border="1" − |- − ! Name || Block || Rail || Notes − |- − | 0 || CpuBus || vdd_cpu || − |- − | 1 || GPU || vdd_gpu || − |- − | 2 || I2S1 || vdd_soc || − |- − | 3 || I2S2 || vdd_soc || − |- − | 4 || I2S3 || vdd_soc || − |- − | 5 || PWM || vdd_soc || − |- − | 6 || I2C1 || vdd_soc || − |- − | 7 || I2C2 || vdd_soc || − |- − | 8 || I2C3 || vdd_soc || − |- − | 9 || I2C4 || vdd_soc || − |- − | 10 || I2C5 || vdd_soc || − |- − | 11 || I2C6 || vdd_soc || − |- − | 12 || SPI1 || vdd_soc || − |- − | 13 || SPI2 || vdd_soc || − |- − | 14 || SPI3 || vdd_soc || − |- − | 15 || SPI4 || vdd_soc || − |- − | 16 || DISP1 || vdd_soc || − |- − | 17 || DISP2 || vdd_soc || − |- − | 20 || SDMMC1 || vdd_soc || − |- − | 21 || SDMMC2 || vdd_soc || − |- − | 22 || SDMMC3 || vdd_soc || − |- − | 23 || SDMMC4 || vdd_soc || − |- − | 24 || - || - || Not actual block. Used for debug and stuff. − |- − | 25 || CSITE || vdd_soc || − |- − | 26 || TSEC || vdd_soc || − |- − | 27 || MSELECT || vdd_soc || − |- − | 28 || HDA2CODEC_2X || vdd_soc || − |- − | 29 || ACTMON || vdd_soc || − |- − | 30 || I2C_SLOW || vdd_soc || − |- − | 31 || SOR1 || vdd_soc || − |- − | 33 || HDA || vdd_soc || − |- − | 34 || XUSB_CORE_HOST || vdd_soc || − |- − | 35 || XUSB_FALCON || vdd_soc || − |- − | 36 || XUSB_FS || vdd_soc || − |- − | 37 || XUSB_CORE_DEV || vdd_soc || − |- − | 38 || XUSB_SS_HOSTDEV || vdd_soc || − |- − | 39 || UARTA || vdd_soc || − |- − | 40 || UARTB || vdd_soc || − |- − | 41 || UARTC || vdd_soc || − |- − | 42 || UARTD || vdd_soc || − |- − | 43 || HOST1X || vdd_soc || − |- − | 44 || ENTROPY || vdd_soc || − |- − | 45 || SOC_THERM || vdd_soc || − |- − | 46 || VIC || vdd_soc || − |- − | 47 || NVENC || vdd_soc || − |- − | 48 || NVJPG || vdd_soc || − |- − | 49 || NVDEC || vdd_soc || − |- − | 50 || QSPI || vdd_soc || − |- − | 52 || TSECB || vdd_soc || − |- − | 53 || APE || vdd_soc || − |- − | 54 || ACLK || vdd_soc || − |- − | 55 || UARTAPE || vdd_soc || − |- − | 56 || EMC || vdd_soc || − |- − | 57 || PLLE0 || vdd_soc || − |- − | 58 || PLLE0 || vdd_soc || − |- − | 59 || DSI || vdd_soc || − |- − | 60 || MAUD || vdd_soc || − |- − | 61 || DPAUX1 || vdd_soc || − |- − | 62 || MIPI_CAL || vdd_soc || − |- − | 63 || UART_FST_MIPI_CAL || vdd_soc || − |- − | 64 || OSC || vdd_soc || − |- − | 65 || SCLK || vdd_soc || − |- − | 66 || SOR_SAFE || vdd_soc || − |- − | 67 || XUSB_SS || vdd_soc || − |- − | 68 || XUSB_HOST || vdd_soc || − |- − | 69 || XUSB_DEV || vdd_soc || − |- − | 70 || EXTPERIPH1 || vdd_soc || − |- − | 71 || AHUB || vdd_soc || − |- − | 72 || HDA2HDMICODEC || vdd_soc || − |- − | 73 || PLLP5 || vdd_soc || − |- − | 74 || USBD || vdd_soc || − |- − | 75 || USB2 || vdd_soc || − |- − | 76 || PCIE || vdd_soc || − |- − | 77 || AFI || vdd_soc || − |- − | 78 || PCIEXCLK || vdd_soc || − |- − | 79 || PEX_USB_UPHY || vdd_soc || − |- − | 80 || XUSB_PADCTL || vdd_soc || − |- − | 81 || APBDMA || vdd_soc || − |- − | 82 || USB2_TRK || vdd_soc || − |- − | 83 || PLLE0 || vdd_soc || − |- − | 84 || PLLE0 || vdd_soc || − |- − | 85 || CEC || vdd_soc || − |- − | [6.0.0+] 86 || EXTPERIPH2 || vdd_soc || − |} − − === Voltage === − {| class="wikitable" border="1" − |- − ! Name || Block || Notes − |- − | 0 || max77620_sd0 || − |- − | 1 || max77620_sd1 || − |- − | 2 || max77620_sd2 || − |- − | 3 || max77620_sd3 || − |- − | 4 || max77620_ldo0 || 1.2v − |- − | 5 || max77620_ldo1 || − |- − | 6 || max77620_ldo2 || SDcard power, 1.8v - 3.3v − |- − | 7 || max77620_ldo3 || GC ASIC 3.1v − |- − | 8 || max77620_ldo4 || RTC power, 0.85v − |- − | 9 || max77620_ldo5 || GC ASIC 1.8v − |- − | 10 || max77620_ldo6 || AVDD touchscreen, 2.9v − |- − | 11 || max77620_ldo7 || − |- − | 12 || max77620_ldo8 || DisplayPort, 1.05v − |- − | 13 || max77621_cpu || − |- − | 14 || max77621_gpu || − |} − Note: max77620 GPIOs are only used internally by the driver during init, and not exposed via an API.+ + Line 363:
Line 213: − + Line 371:
Line 221: − + − + − + − + − + − + + + + + + + Line 393:
Line 249: − + − + − + − + − + − + − + − + − + − + − + Line 425:
Line 281: − + + + + Line 437:
Line 296: − + − + − + − + + + + + + + Line 453:
Line 318: − + − + − + − + − + − + + + + + + + + + + Line 475:
Line 349: − + − + − + − + − + + + + + + + + + + + + + + + + + + Line 586:
Line 477: − + + + − + Line 644:
Line 537: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 687:
Line 636: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
→bpc
| 7 || [2.0.0+] GetPowerEvent
| 7 || [2.0.0+] GetPowerEvent
|-
|-
| 8 || [2.0.0+]
| 8 || [2.0.0-9.2.0] CreateWakeupTimer
|-
|-
| 9 || [2.0.0+]
| 9 || [2.0.0-9.2.0] CancelWakeupTimer
|-
|-
| 10 || [2.0.0+]
| 10 || [2.0.0-9.2.0] [[#EnableWakeupTimerOnDevice]]
|-
|-
| 11 || [3.0.0+]
| 11 || [3.0.0-9.2.0] CreateWakeupTimerEx
|-
|-
| 12 || [3.0.0+]
| 12 || [3.0.0-9.2.0] GetLastEnabledWakeupTimerType
|-
|-
| 13 || [3.0.0+]
| 13 || [3.0.0-9.2.0] CleanAllWakeupTimers
|-
|-
| 14 || [6.0.0+]
| 14 || [6.0.0+]
|-
| 15 || [10.0.0+]
|}
|}
== EnableWakeupTimerOnDevice ==
No input, returns a total of 0x10-bytes of output. [3.0.0+] Now returns a total of 0xC-bytes of output.
= bpc:r =
= bpc:r =
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || GetExternalRtcValue
| 0 || GetRtcTime
|-
| 1 || SetRtcTime
|-
| 2 || GetRtcResetDetected
|-
| 3 || [2.0.0+] ClearRtcResetDetected
|-
| 4 || [3.0.0+] SetUpRtcResetOnShutdown
|}
= bpc:c =
This is "nn::bpc::IBoardPowerControlManager".
[2.0.0+] This service was replaced by [[#bpc|bpc]].
{| class="wikitable" border="1"
|-
! Cmd || Name
|-
| 0 || ShutdownSystem
|-
| 1 || RebootSystem
|-
|-
| 1 || SetExternalRtcValue
| 2 || GetWakeupReason
|-
|-
| 2 || ReadExternalRtcResetFlag
| 3 || GetShutdownReason
|-
|-
| 3 || [2.0.0+] ClearExternalRtcResetFlag
| 4 || GetAcOk
|-
|-
| 4 || [3.0.0+]
| 5 || GetBoardPowerControlEvent
|}
|}
= bpc:b =
This is "nn::bpc::IPowerButtonManager".
[2.0.0+] This service was merged into [[#bpc|bpc]].
{| class="wikitable" border="1"
|-
! Cmd || Name
|-
| 0 || GetSleepButtonState
|-
| 1 || GetPowerEvent
|}
= bpc:w =
This is "nn::bpc::IWakeupConfigManager".
[2.0.0+] This service was merged into [[#bpc|bpc]].
{| class="wikitable" border="1"
|-
! Cmd || Name
|-
| 0 || CreateWakeupTimer
|-
| 1 || CancelWakeupTimer
|-
| 2 || [[#EnableWakeupTimerOnDevice]]
|}
= pcv =
= pcv =
| 26 || [3.0.0+] GetFuseInfo
| 26 || [3.0.0+] GetFuseInfo
|-
|-
| 27 || [5.0.0+]
| 27 || [5.0.0+] GetDramId
|-
|-
| [6.0.0-7.0.1] 28 ||
| [6.0.0-7.0.1] 28 || [[#IsPoweredOn]]
|-
|-
| [6.0.0-7.0.1] 29 ||
| [6.0.0-7.0.1] 29 || [[#GetVoltage]]
|}
|}
[7.0.0+] The type-0xA output buffers were replaced with type-0x22 output buffers, for the following: GetDvfsTable, GetModuleStateTable, and GetPowerDomainStateTable.
[7.0.0+] The type-0xA output buffers were replaced with type-0x22 output buffers, for the following: GetDvfsTable, GetModuleStateTable, and GetPowerDomainStateTable.
== User Name to Block Maps ==
== IsPoweredOn ==
Takes a [[#PowerDomain|PowerDomain]] and returns a bool indicating the status of the requested voltage block.
== GetVoltage ==
Takes a [[#PowerDomain|PowerDomain]] and returns an u32 voltage value for the requested voltage block.
= pcv:arb =
= pcv:arb =
= clkrst, clkrst:i =
= clkrst, clkrst:i =
These are "nn::clkrst::IClkrstManager" and "nn::clkrst::IClkrstImmediateManager".
These are "nn::clkrst::IClkrstManager" and "nn::clkrst::IImmediateManager".
These were added with [8.0.0+].
These were added with [8.0.0+].
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || OpenSession
| 0 || [[#OpenSession]]
|-
|-
| 1 ||
| 1 || GetTemperatureThresholds
|-
|-
| 2 ||
| 2 || SetTemperature
|-
|-
| 3 ||
| 3 || GetPossibleClockRates
|-
|-
| 4 ||
| 4 || GetClockInfoEvent
|-
|-
| 5 ||
| 5 || GetClockModuleNumLimit
|}
|}
== OpenSession ==
Takes a [[#Module|DeviceCode]] and an u32. Returns an [[#IClkrstSession]].
== GetClockModuleNumLimit ==
Returns 0x1A.
== IClkrstSession ==
== IClkrstSession ==
| 0 || SetClockEnabled
| 0 || SetClockEnabled
|-
|-
| 1 ||
| 1 || SetClockDisabled
|-
|-
| 2 || SetReset
| 2 || SetResetAsserted
|-
|-
| 3 ||
| 3 || SetResetDeasserted
|-
|-
| 4 || SetPowerEnabled
| 4 || SetPowerEnabled
|-
|-
| 5 ||
| 5 || SetPowerDisabled
|-
|-
| 6 ||
| 6 || GetState
|-
|-
| 7 ||
| 7 || SetClockRate
|-
|-
| 8 ||
| 8 || GetClockRate
|-
|-
| 9 ||
| 9 || SetMinVClockRate
|-
|-
| 10 ||
| 10 || GetPossibleClockRates
|-
|-
| 11 ||
| 11 || GetDvfsTable
|}
|}
= clkrst:a =
= clkrst:a =
This is "nn::clkrst::IClkrstArbitrationManager".
This is "nn::clkrst::IArbitrationManager".
This was added with [8.0.0+].
This was added with [8.0.0+].
! Cmd || Name
! Cmd || Name
|-
|-
| 0 ||
| 0 || [[#ReleaseControl]]
|}
|}
== ReleaseControl ==
Takes a [[#Module|Module]]. No output.
= rgltr =
= rgltr =
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || OpenSession
| 0 || [[#OpenSession]]
|-
|-
| 1 ||
| 1 || GetPowerDomainStateTable
|-
|-
| 2 ||
| 2 || GetPowerInfoEvent
|-
|-
| 3 ||
| 3 || GetPowerModuleNumLimit
|}
|}
== OpenSession ==
Takes a [[#PowerDomain|DeviceCode]] and returns an [[#IRegulatorSession]].
== GetPowerModuleNumLimit ==
Returns 0x3.
== IRegulatorSession ==
== IRegulatorSession ==
! Cmd || Name
! Cmd || Name
|-
|-
| 0 ||
| 0 || [[#SetVoltageEnabled]]
|-
|-
| 1 ||
| 1 ||
|-
|-
| 2 ||
| 2 || [[#GetVoltageEnabled]]
|-
|-
| 3 ||
| 3 || GetVoltageRange
|-
|-
| 4 ||
| 4 || GetVoltageValue
|-
|-
| 5 ||
| 5 || [[#SetVoltageValue]]
|-
|-
| 6 ||
| 6 || ChangeVoltage
|}
|}
=== SetVoltageEnabled ===
Takes a bool. Enables/disables the LDO this session was opened for.
=== GetVoltageEnabled ===
Returns a bool. True if voltage is enabled, false if not.
=== SetVoltageValue ===
Takes in a voltage in microvolts and sets the LDO to this voltage.
= rtc =
= rtc =
! Cmd || Name
! Cmd || Name
|-
|-
| 0 ||
| 0 || [[#GetRtcTime]]
|-
|-
| 1 ||
| 1 || [[#SetRtcTime]]
|-
|-
| 2 ||
| 2 || [[#SetUpRtcResetOnShutdown]]
|-
|-
| 3 ||
| 3 || [[#GetRtcResetDetected]]
|-
|-
| 4 ||
| 4 || [[#ClearRtcResetDetected]]
|}
|}
== GetRtcTime ==
Same as GetRtcTime from [[#bpc:r|bpc:r]], but takes an extra [[Bus_services#I2cDevice|DeviceCode]], which [[#bpc:r|bpc:r]] hardcodes to 0x3B000001 (max77620_rtc0) instead.
== SetRtcTime ==
Same as SetRtcTime from [[#bpc:r|bpc:r]], but takes an extra [[Bus_services#I2cDevice|DeviceCode]], which [[#bpc:r|bpc:r]] hardcodes to 0x3B000001 (max77620_rtc0) instead.
== SetUpRtcResetOnShutdown ==
Takes an u8 '''DoReset''' and a [[Bus_services#I2cDevice|DeviceCode]]. Similar to SetUpRtcResetOnShutdown from [[#bpc:r|bpc:r]], but this version assigns the provided boolean value on a per-client basis (instead of a global variable) and checks it when the current [[PSC_services#Power_Management_States|power state]] is "ReadyShutdown".
== GetRtcResetDetected ==
Same as GetRtcResetDetected from [[#bpc:r|bpc:r]], but takes an extra [[Bus_services#I2cDevice|DeviceCode]], which [[#bpc:r|bpc:r]] hardcodes to 0x3B000001 (max77620_rtc0) instead.
== ClearRtcResetDetected ==
Same as ClearRtcResetDetected from [[#bpc:r|bpc:r]], but takes an extra [[Bus_services#I2cDevice|DeviceCode]], which [[#bpc:r|bpc:r]] hardcodes to 0x3B000001 (max77620_rtc0) instead.
= time:u, time:a, time:s =
= time:u, time:a, time:s =
This is "nn::timesrv::detail::service::IStaticService".
This is "nn::timesrv::detail::service::IStaticService".
[9.0.0+] These services were moved to [[Glue_services|Glue]] and [[PSC_services|PSC]].
{| class="wikitable" border="1"
{| class="wikitable" border="1"
| 2 || GetSystemClockContext || Returns an output [[#SystemClockContext]].
| 2 || GetSystemClockContext || Returns an output [[#SystemClockContext]].
|-
|-
| 3 || SetSystemClockContext || Takes an input [[#SystemClockContext]].
| 3 || SetSystemClockContext || Takes an input [[#SystemClockContext]].
|-
| 4 || [9.0.0+] GetOperationEventReadableHandle ||
|}
|}
=== PosixTime ===
=== PosixTime ===
This is an u64 for UTC POSIX time.
This is an s64 for UTC POSIX time.
=== SystemClockContext ===
=== SystemClockContext ===
This is loaded from the [[Title_list|TimeZoneBinary]] title with the specified LocationName under the zoneinfo/ directory, the content is then converted into this TimeZoneRule structure.
This is loaded from the [[Title_list|TimeZoneBinary]] title with the specified LocationName under the zoneinfo/ directory, the content is then converted into this TimeZoneRule structure.
The files contained under zoneinfo/ directory are Tzif2 files without Tzif1 header and data at the begining of them (see [https://tools.ietf.org/html/rfc8536 RFC8536] for more information).
The conversion of a Tzif2 file to a TimeZoneRule structure is based on [https://github.com/eggert/tz/blob/master/localtime.c tz database code] with some custom modifications (Leap seconds aren't handled, no usage of "posixrules" and Tzif1 support stripped out).
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x4 || timecnt
|-
| 0x4 || 0x4 || typecnt
|-
| 0x8 || 0x4 || charcnt
|-
| 0xC || 0x1 || goback
|-
| 0xD || 0x1 || goahead
|-
| 0xE || 0x2 || Padding
|-
| 0x10 || 0x8 * 1000 || ats
|-
| 0x1f50 || 0x1 * 1000 || types
|-
| 0x2338 || 0x10 * 128 || ttis (time type information), struct ttinfo[1000]
|-
| 0x2b38 || 0x1 * 512 || chars
|-
| 0x2d38 || 0x4 || defaulttype
|-
| 0x2d3c || 0x12c4 || Reserved / Unused
|}
=== ttinfo ===
This is an 0x10-byte struct.
Represent a Time Type Information used in [[#TimeZoneRule]].
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x4 || tt_gmtoff
|-
| 0x4 || 0x1 || tt_isdst
|-
| 0x5 || 0x3 || Padding
|-
| 0x8 || 0x4 || tt_abbrind
|-
| 0xC || 0x1 || tt_ttisstd
|-
| 0xD || 0x1 || tt_ttisgmt
|-
| 0xE || 0x2 || Padding
|}
=== TimeZoneRuleVersion ===
=== TimeZoneRuleVersion ===
This is an 0x18-byte struct. This stores timezone info.
This is an 0x18-byte struct. This stores timezone info.
= Module =
This is "nn::pcv::Module".
{| class="wikitable" border="1"
|-
! Name || DeviceCode || Block || Rail || Notes
|-
| 0 || 0x40000001 || CpuBus || vdd_cpu ||
|-
| 1 || 0x40000002 || GPU || vdd_gpu ||
|-
| 2 || 0x40000003 || I2S1 || vdd_soc ||
|-
| 3 || 0x40000004 || I2S2 || vdd_soc ||
|-
| 4 || 0x40000005 || I2S3 || vdd_soc ||
|-
| 5 || 0x40000006 || PWM || vdd_soc ||
|-
| 6 || 0x02000001 || I2C1 || vdd_soc ||
|-
| 7 || 0x02000002 || I2C2 || vdd_soc ||
|-
| 8 || 0x02000003 || I2C3 || vdd_soc ||
|-
| 9 || 0x02000004 || I2C4 || vdd_soc ||
|-
| 10 || 0x02000005 || I2C5 || vdd_soc ||
|-
| 11 || 0x02000006 || I2C6 || vdd_soc ||
|-
| 12 || 0x07000000 || SPI1 || vdd_soc ||
|-
| 13 || 0x07000001 || SPI2 || vdd_soc ||
|-
| 14 || 0x07000002 || SPI3 || vdd_soc ||
|-
| 15 || 0x07000003 || SPI4 || vdd_soc ||
|-
| 16 || 0x40000011 || DISP1 || vdd_soc ||
|-
| 17 || 0x40000012 || DISP2 || vdd_soc ||
|-
| 18 || 0x40000013 || ISP || - || Not an actual block. Used for debug.
|-
| 19 || 0x40000014 || VI || - || Not an actual block. Used for debug.
|-
| 20 || 0x40000015 || SDMMC1 || vdd_soc ||
|-
| 21 || 0x40000016 || SDMMC2 || vdd_soc ||
|-
| 22 || 0x40000017 || SDMMC3 || vdd_soc ||
|-
| 23 || 0x40000018 || SDMMC4 || vdd_soc ||
|-
| 24 || 0x40000019 || OWR || - || Not an actual block. Used for debug.
|-
| 25 || 0x4000001A || CSITE || vdd_soc ||
|-
| 26 || 0x4000001B || TSEC || vdd_soc ||
|-
| 27 || 0x4000001C || MSELECT || vdd_soc ||
|-
| 28 || 0x4000001D || HDA2CODEC_2X || vdd_soc ||
|-
| 29 || 0x4000001E || ACTMON || vdd_soc ||
|-
| 30 || 0x4000001F || I2C_SLOW || vdd_soc ||
|-
| 31 || 0x40000020 || SOR1 || vdd_soc ||
|-
| 32 || 0x40000021 || SATA || - || Not an actual block. Used for debug.
|-
| 33 || 0x40000022 || HDA || vdd_soc ||
|-
| 34 || 0x40000023 || XUSB_CORE_HOST || vdd_soc ||
|-
| 35 || 0x40000024 || XUSB_FALCON || vdd_soc ||
|-
| 36 || 0x40000025 || XUSB_FS || vdd_soc ||
|-
| 37 || 0x40000026 || XUSB_CORE_DEV || vdd_soc ||
|-
| 38 || 0x40000027 || XUSB_SS_HOSTDEV || vdd_soc ||
|-
| 39 || 0x03000001 || UARTA || vdd_soc ||
|-
| 40 || 0x35000405 || UARTB || vdd_soc ||
|-
| 41 || 0x3500040F || UARTC || vdd_soc ||
|-
| 42 || 0x37000001 || UARTD || vdd_soc ||
|-
| 43 || 0x4000002C || HOST1X || vdd_soc ||
|-
| 44 || 0x4000002D || ENTROPY || vdd_soc ||
|-
| 45 || 0x4000002E || SOC_THERM || vdd_soc ||
|-
| 46 || 0x4000002F || VIC || vdd_soc ||
|-
| 47 || 0x40000030 || NVENC || vdd_soc ||
|-
| 48 || 0x40000031 || NVJPG || vdd_soc ||
|-
| 49 || 0x40000032 || NVDEC || vdd_soc ||
|-
| 50 || 0x40000033 || QSPI || vdd_soc ||
|-
| 51 || 0x40000034 || VI_I2C || - || Not an actual block. Used for debug.
|-
| 52 || 0x40000035 || TSECB || vdd_soc ||
|-
| 53 || 0x40000036 || APE || vdd_soc ||
|-
| 54 || 0x40000037 || ACLK || vdd_soc ||
|-
| 55 || 0x40000038 || UARTAPE || vdd_soc ||
|-
| 56 || 0x40000039 || EMC || vdd_soc ||
|-
| 57 || 0x4000003A || PLLE0 || vdd_soc ||
|-
| 58 || 0x4000003B || PLLE0 || vdd_soc ||
|-
| 59 || 0x4000003C || DSI || vdd_soc ||
|-
| 60 || 0x4000003D || MAUD || vdd_soc ||
|-
| 61 || 0x4000003E || DPAUX1 || vdd_soc ||
|-
| 62 || 0x4000003F || MIPI_CAL || vdd_soc ||
|-
| 63 || 0x40000040 || UART_FST_MIPI_CAL || vdd_soc ||
|-
| 64 || 0x40000041 || OSC || vdd_soc ||
|-
| 65 || 0x40000042 || SCLK || vdd_soc ||
|-
| 66 || 0x40000043 || SOR_SAFE || vdd_soc ||
|-
| 67 || 0x40000044 || XUSB_SS || vdd_soc ||
|-
| 68 || 0x40000045 || XUSB_HOST || vdd_soc ||
|-
| 69 || 0x40000046 || XUSB_DEV || vdd_soc ||
|-
| 70 || 0x40000047 || EXTPERIPH1 || vdd_soc ||
|-
| 71 || 0x40000048 || AHUB || vdd_soc ||
|-
| 72 || 0x40000049 || HDA2HDMICODEC || vdd_soc ||
|-
| 73 || 0x4000004A || PLLP5 || vdd_soc ||
|-
| 74 || 0x4000004B || USBD || vdd_soc ||
|-
| 75 || 0x4000004C || USB2 || vdd_soc ||
|-
| 76 || 0x4000004D || PCIE || vdd_soc ||
|-
| 77 || 0x4000004E || AFI || vdd_soc ||
|-
| 78 || 0x4000004F || PCIEXCLK || vdd_soc ||
|-
| 79 || 0x40000050 || PEX_USB_UPHY || vdd_soc ||
|-
| 80 || 0x40000051 || XUSB_PADCTL || vdd_soc ||
|-
| 81 || 0x40000052 || APBDMA || vdd_soc ||
|-
| 82 || 0x40000053 || USB2_TRK || vdd_soc ||
|-
| 83 || 0x40000054 || PLLE0 || vdd_soc ||
|-
| 84 || 0x40000055 || PLLE0 || vdd_soc ||
|-
| 85 || 0x40000056 || CEC || vdd_soc ||
|-
| [6.0.0+] 86 || 0x40000057 || EXTPERIPH2 || vdd_soc ||
|}
= PowerDomain =
This is "nn::pcv::PowerDomain".
{| class="wikitable" border="1"
|-
! Name || DeviceCode || Block || Notes
|-
| 0 || 0x3A000080 || max77620_sd0 ||
|-
| 1 || 0x3A000081 || max77620_sd1 ||
|-
| 2 || 0x3A000082 || max77620_sd2 ||
|-
| 3 || 0x3A000083 || max77620_sd3 ||
|-
| 4 || 0x3A0000A0 || max77620_ldo0 || 1.2v
|-
| 5 || 0x3A0000A1 || max77620_ldo1 ||
|-
| 6 || 0x3A0000A2 || max77620_ldo2 || SDcard power, 1.8v - 3.3v
|-
| 7 || 0x3A0000A3 || max77620_ldo3 || GC ASIC 3.1v
|-
| 8 || 0x3A0000A4 || max77620_ldo4 || RTC power, 0.85v
|-
| 9 || 0x3A0000A5 || max77620_ldo5 || GC ASIC 1.8v
|-
| 10 || 0x3A0000A6 || max77620_ldo6 || AVDD touchscreen, 2.9v
|-
| 11 || 0x3A0000A7 || max77620_ldo7 ||
|-
| 12 || 0x3A0000A8 || max77620_ldo8 || DisplayPort, 1.05v
|-
| 13 || 0x3A000003 || max77621_cpu ||
|-
| 14 || 0x3A000004 || max77621_gpu ||
|-
| [6.0.0+] 15 || 0x3A000003 || max77812_cpu ||
|-
| [6.0.0+] 16 || 0x3A000004 || max77812_gpu ||
|-
| [6.0.0+] 17 || 0x3A000005 || max77812_dram ||
|-
| [8.0.0+] - || 0x3C000004 || || SDCard
|-
| [8.0.0+] - || 0x34000007 || || HDMI
|-
| [8.0.0+] - || 0x3500041A || || MCU
|}
[[Category:Services]]
[[Category:Services]]