Network Interface services

From Nintendo Switch Brew
Revision as of 18:03, 15 February 2020 by Yellows8 (talk | contribs)
Jump to navigation Jump to search

nifm:a, nifm:s, nifm:u

These are "nn::nifm::detail::IStaticService".

Max sessions: nifm:a = 0x2, nifm:s = 0x10, nifm:u = 0x5.

nifm:u = User, nifm:s = System, and nifm:a = Admin.

Cmd Name Notes
4 #CreateGeneralServiceOld ([1.0.0-2.3.0] CreateGeneralService)
5 [3.0.0+] #CreateGeneralService

CreateGeneralServiceOld

No input, returns an #IGeneralService.

CreateGeneralService

Takes a PID and an input u64 reserved_pid, returns an #IGeneralService.

IGeneralService

This is "nn::nifm::detail::IGeneralService".

Cmd Name Notes
1 #GetClientId
2 CreateScanRequest Returns an #IScanRequest.
4 CreateRequest Returns an #IRequest.
5 GetCurrentNetworkProfile
6 EnumerateNetworkInterfaces
7 EnumerateNetworkProfiles
8 GetNetworkProfile
9 SetNetworkProfile
10 RemoveNetworkProfile
11 GetScanDataOld ([1.0.0-3.0.2] GetScanData)
12 GetCurrentIpAddress
13 GetCurrentAccessPointOld ([1.0.0-3.0.2] GetCurrentAccessPoint)
14 CreateTemporaryNetworkProfile Returns an #INetworkProfile.
15 GetCurrentIpConfigInfo
16 SetWirelessCommunicationEnabled
17 IsWirelessCommunicationEnabled
18 GetInternetConnectionStatus
19 SetEthernetCommunicationEnabled
20 IsEthernetCommunicationEnabled
21 #IsAnyInternetRequestAccepted
22 IsAnyForegroundRequestAccepted
23 PutToSleep
24 WakeUp
25 GetSsidListVersion
26 SetExclusiveClient
27 GetDefaultIpSetting
28 SetDefaultIpSetting
29 SetWirelessCommunicationEnabledForTest
30 SetEthernetCommunicationEnabledForTest
31 [2.0.0+] GetTelemetorySystemEventReadableHandle
32 [2.0.0+] GetTelemetryInfo
33 [2.0.0+] ConfirmSystemAvailability
34 [4.0.0+] SetBackgroundRequestEnabled
35 [4.0.0+] GetScanData
36 [4.0.0+] GetCurrentAccessPoint
37 [4.0.0+] Shutdown
38 [6.0.0+] GetAllowedChannels
39 [8.0.0+] NotifyApplicationSuspended
40 [8.0.0+] SetAcceptableNetworkTypeFlag
41 [8.0.0+] GetAcceptableNetworkTypeFlag
42 [8.0.0+] NotifyConnectionStateChanged
43 [9.0.0+] SetWowlDelayedWakeTime

GetClientId

Takes a type-0x1A output buffer containing a #ClientId, no output.

The wrapper for this with official sw will return 0 when any errors occur (wrapper returns #ClientId not Result).

IsAnyInternetRequestAccepted

Takes a type-0x19 input buffer containing a #ClientId, returns an output u8 bool.

The wrapper for this with official sw will return 0 when any errors occur (wrapper returns bool not Result).

IScanRequest

This is "nn::nifm::detail::IScanRequest".

Cmd Name
0 Submit
1 IsProcessing
2 GetResult
3 GetSystemEventReadableHandle
4 [6.0.0+] SetChannels

IRequest

This is "nn::nifm::detail::IRequest". This represents an application or sysmodule's request to bring a network up.

Cmd Name
0 #GetRequestState
1 #GetResult
2 #GetSystemEventReadableHandles
3 #Cancel
4 #Submit
5 #SetRequirement
6 SetRequirementPreset
8 SetPriority
9 SetNetworkProfileId
10 SetRejectable
11 #SetConnectionConfirmationOption
12 #SetPersistent
13 SetInstant
14 SetSustainable
15 SetRawPriority
16 SetGreedy
17 SetSharable
18 SetRequirementByRevision
19 #GetRequirement
20 GetRevision
21 GetAppletInfo
22 GetAdditionalInfo
23 [3.0.0+] SetKeptInSleep
24 [3.0.0+] RegisterSocketDescriptor
25 [3.0.0+] UnregisterSocketDescriptor

GetRequestState

Number Description
1 Not yet submitted or error
2 Pending (sdk calls this OnHold)
3 Connected

GetResult

If the request enters state 1, this command can be used to determine why. It responds with the nice networking error codes that there are support pages for.

GetSystemEventReadableHandles

Returns two event handles. The first one signals when the RequestState changes.

Cancel

Cancels the request to bring the network up.

Submit

Submits the request to bring the network up. Call this after configuring the request.

SetRequirement

Takes a total of 0x20-bytes of input, no output.

[3.0.0+] Takes an additional 4-bytes of input.

SetConnectionConfirmationOption

Set how to verify the internet connection.

Option Description
0
1
2 "Local" network (does not check for working DNS)
3
4 Default
5

SetPersistent

If this is set, when the network connection is lost, rather than causing the request to enter state 1, it will instead enter state 2 and attempt to bring the network back up again.

GetRequirement

No input, returns a total of 0x20-bytes of output.

[3.0.0+] Returns an additional 4-bytes of output.

INetworkProfile

This is "nn::nifm::detail::INetworkProfile".

Cmd Name
0 Update
1 PersistOld ([1.0.0-2.3.0] Persist)
2 [3.0.0+] Persist

ClientId

This is "nn::nifm::ClientId". This contains an u32.