4,563
edits
Changes
Jump to navigation
Jump to search
Line 35:
Line 35: − + Line 87:
Line 87: − + + + + +
→Header
| 0x206
| 0x206
| 0x1
| 0x1
| Crypto Type, must be 0-2. Only used stating with [[3.0.0]]. Normally 0. 2 = Crypto supported starting with [[3.0.0]].
| Crypto Type. Only used stating with [[3.0.0]]. Normally 0. 2 = Crypto supported starting with [[3.0.0]].
|-
|-
| 0x207
| 0x207
The keyindex passed to the contentkey-generation funcptr is determined as follows:
The keyindex passed to the contentkey-generation funcptr is determined as follows:
* Pre-[[3.0.0]]: The ncahdr keyindex field(0x207) is passed directly.
* Pre-[[3.0.0]]: The ncahdr keyindex field(0x207) is passed directly.
* [[3.0.0]]+: It's determined using ncahdr keyindex(0x207) and "Crypto Type"(0x206). The end result is basically the same, except when ncahdr_x206 == 0x2, final_index is new_base_index+ncahdr_keyindex. Actual implementation loads index from u32_array[ncahdr_crypto_type], where the address of u32_array is different for each ncahdr_keyindex.
* [[3.0.0]]+: It's determined using ncahdr keyindex(0x207) and "Crypto Type"(0x206). The latter field must be 0-2. In each ncahdr_keyindex block, it executes "if(ncahdr_x206>=3)<panic>", but that won't trigger due to the earlier check. The end result is basically the same as pre-[[3.0.0]], except when ncahdr_x206 == 0x2, final_index is new_base_index+ncahdr_keyindex. Actual implementation loads index from u32_array[ncahdr_crypto_type], where the address of u32_array is different for each ncahdr_keyindex.
* [[3.0.1]]+: The dedicated range check for ncahdr_x206("Crypto Type") was removed, since the updated code no longer needs it. The output from a function masked with 0xFF is now used instead of ncahdr_x206(ncahdr_crypto_type). The range check for that field was changed from {ncahdr_x206 check with panic described above}, to "if(index>=4)final_index=10;"(skips accessing the array and uses 10 directly). The arrays were updated with an additional entry: final_index=v301_base_index+ncahdr_keyindex.
** The keydata for the above index10 is not(?) known to be initialized.
** The new function called by the code described above does:
** <code>if(ncahdr_x206 < ncahdr_x220){ret = ncahdr_x220; } else { ret = ncahdr_x206; } return ret;</code>
==Section Table Entry==
==Section Table Entry==