Hardware

From Nintendo Switch Brew
Revision as of 12:25, 6 August 2019 by Minus256 (talk | contribs) (EMMC Pinout: typo)
Jump to: navigation, search

Motherboard

There are 3 known revisions of the motherboard:

  • HAC-CPU-01 (Launch, earliest manifacture date seen: 01/12 2016)
  • HAC-CPU-10
  • HAC-CPU-20 (Earliest manifacture date seen: 26/10 2017)

What actually changed between different revisions is unknown.

Specifications

Type
SoC NVidia ODNX02-A2 (See also here)
Screen 6.2-inch, multi-touch capacitive LCD screen
Storage Samsung KLMBG2JENB-B041 32 GB eMMC
or
Toshiba THGBMHG8C2LBAIL 32 GB eMMC
Memory Samsung K4F6E304HB-MGCH 2 GB LPDDR4 DRAM x2 (Total 4GB)
Wifi/BT Broadcom BCM4356XKUBG
PMIC Maxim Integrated MAX77620AEWJ+T
Audio Realtek ALC5639

eMMC Pinout

Front

HAC-EMMC-Side-B.png

Back

HAC-EMMC-Side-A.png

Supply power via the VCC 3.3V and 1.8V pins, and solder the CLK, CMD, and DAT0 pins to an SD Card reader in order to extract the data off the eMMC chip.

eMMC Connector

HAC-EMMC-Connector-Plug.jpg

The eMMC connector plug on the board mates with the receptacle on the Switch motherboard. The receptacle is a Molex 5009130302, and is available from retailers such as Digi-Key.

Notes

1. https://www.sosav.fr/guides/consoles/nintendo/nintendo-salon/nintendo-switch/demontage-complet/

2. https://www.ifixit.com/Teardown/Nintendo+Switch+Teardown/78263