Hardware

Revision as of 18:12, 25 August 2019 by Hexkyz (talk | contribs)

Motherboard

Nintendo Switch

Product Code Description
ODIN-CPU-X5 Pre-release Nintendo Switch.
HAC-CPU-01 Retail Nintendo Switch (earliest manifacture date seen: 01/12 2016).
HAC-CPU-10 Retail Nintendo Switch.
HAC-CPU-20 Retail Nintendo Switch (earliest manifacture date seen: 26/10 2017).

Nintendo Switch Mariko

Product Code Description
MODIN-CPU-X5 Pre-release Nintendo Switch Mariko.
HAD-CPU-01 Retail Nintendo Switch Mariko.

Nintendo Switch Lite

Product Code Description
VALI-CPU-X5 Pre-release Nintendo Switch Lite.

Specifications

Nintendo Switch

Component Description
SoC NVIDIA ODNX02-A2
Screen InnoLux P062CCA-AZ1
Storage Samsung KLMBG2JENB-B041 32 GB eMMC
or
Toshiba THGBMHG8C2LBAIL 32 GB eMMC
Memory Samsung K4F6E304HB-MGCH 2 GB LPDDR4 DRAM x2 (Total 4GB)
Wifi/BT Broadcom BCM4356XKUBG
PMIC Maxim Integrated MAX77620AEWJ+T
Audio Realtek ALC5639
GC ASIC B1633 GCBRG HAC STD T1001216

Nintendo Switch Mariko

Component Description
SoC NVIDIA ODNX10-A1
Screen InnoLux P062CCA-AZ2
Storage SK Hynix H26M62002JPR 32 GB eMMC
Memory Samsung K4U6E3S4AM-MGCJ 2 GB LPDDR4x DRAM x2 (Total 4GB)
Wifi/BT
PMIC Maxim Integrated MAX77812
Audio Realtek ALC5639
GC ASIC B1834 GCBRG HAC STD T1439218

Nintendo Switch Lite

Component Description
SoC
Screen
Storage
Memory Samsung K4U6E3S4AM-MGCJ 2 GB LPDDR4x DRAM x2 (Total 4GB)
Wifi/BT
PMIC Maxim Integrated MAX77812
Audio
GC ASIC

eMMC Pinout

Front

 

Back

 

Supply power via the VCC 3.3V and 1.8V pins, and solder the CLK, CMD, and DAT0 pins to an SD Card reader in order to extract the data off the eMMC chip.

eMMC Connector

 
eMMC Board Connector Pinout
 
eMMC Motherboard connector pinout
Pin # Name Type
1 3.3v PWR
2 GND PWR
3 CMD BI
4 GND PWR
5 DAT_STRB(?) OUT
6 GND PWR
7 DAT4 BI
8 GND PWR
9 DAT5 BI
10 GND PWR
11 DAT6 BI
12 GND PWR
13 DAT7 BI
14 GND PWR
15 1.8v PWR
16 1.8v PWR
17 GND PWR
18 GND PWR
19 DAT2 BI
20 GND PWR
21 DAT1 BI
22 GND PWR
23 DAT0 BI
24 GND PWR
25 DAT3 BI
26 GND PWR
27 CLK IN
28 GND PWR
29 RESET IN
30 3.3v PWR

The eMMC connector plug on the board mates with the receptacle on the Switch motherboard. The receptacle is a Molex 5009130302, and is available from retailers such as Digi-Key.

Notes

1. https://www.sosav.fr/guides/consoles/nintendo/nintendo-salon/nintendo-switch/demontage-complet/
2. https://www.ifixit.com/Teardown/Nintendo+Switch+Teardown/78263