Changes

16,985 bytes added ,  17:31, 11 October 2022
Line 15: Line 15:  
== OpenCodeFileSystem ==
 
== OpenCodeFileSystem ==
 
Takes an [[NCM_services#ProgramId|ProgramId]] and a [[#ContentPath]]. Returns an [[#IFileSystem]].
 
Takes an [[NCM_services#ProgramId|ProgramId]] and a [[#ContentPath]]. Returns an [[#IFileSystem]].
 +
 +
[10.0.0+] This now takes an additional type-0x1A output buffer.
    
== IsArchivedProgram ==
 
== IsArchivedProgram ==
Line 35: Line 37:  
| 2 || [4.0.0+] [[#SetCurrentProcess]]
 
| 2 || [4.0.0+] [[#SetCurrentProcess]]
 
|-
 
|-
| 256 || [[#SetEnabledProgramVerification]]
+
| 256 || [1.0.0-9.2.0] [[#SetEnabledProgramVerification]]
 
|}
 
|}
   Line 50: Line 52:     
When the flag is zero, it will set ret=0 instead of ret={error} when verifying the fixed-key [[NPDM]] ACID signature fails. This also skips verifying the [[NCA_Format|NCA Header]] signature using the ACID key. Note that if verifying the fixed-key ACID signature is successful, and verifying the ACID-key NCA header signature fails, it will throw an error and abort.
 
When the flag is zero, it will set ret=0 instead of ret={error} when verifying the fixed-key [[NPDM]] ACID signature fails. This also skips verifying the [[NCA_Format|NCA Header]] signature using the ACID key. Note that if verifying the fixed-key ACID signature is successful, and verifying the ACID-key NCA header signature fails, it will throw an error and abort.
 +
 +
[10.0.0+] This was moved to [[Loader_services|Loader]].
    
= fsp-srv =
 
= fsp-srv =
Line 111: Line 115:  
|-
 
|-
 
| 36 || [9.0.0+] OpenHostFileSystemWithOption
 
| 36 || [9.0.0+] OpenHostFileSystemWithOption
 +
|-
 +
| 37 || [14.0.0+] CreateSaveDataFileSystemWithCreationInfo2
 
|-
 
|-
 
| 51 || [[#OpenSaveDataFileSystem]]
 
| 51 || [[#OpenSaveDataFileSystem]]
Line 116: Line 122:  
| 52 || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
 
| 52 || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
 
|-
 
|-
| 53 || [2.0.0+] OpenReadOnlySaveDataFileSystem
+
| 53 || [2.0.0+] [[#OpenReadOnlySaveDataFileSystem]]
 
|-
 
|-
 
| 57 || [3.0.0+] [[#ReadSaveDataFileSystemExtraDataBySaveDataSpaceId]]
 
| 57 || [3.0.0+] [[#ReadSaveDataFileSystemExtraDataBySaveDataSpaceId]]
Line 142: Line 148:  
| 69 || [8.0.0+] ReadSaveDataFileSystemExtraDataBySaveDataAttribute
 
| 69 || [8.0.0+] ReadSaveDataFileSystemExtraDataBySaveDataAttribute
 
|-
 
|-
| 70 || [8.0.0+] WriteSaveDataFileSystemExtraDataBySaveDataAttribute
+
| 70 || [8.0.0+] WriteSaveDataFileSystemExtraDataWithMaskBySaveDataAttribute
 +
|-
 +
| 71 || [10.0.0+] ReadSaveDataFileSystemExtraDataWithMaskBySaveDataAttribute
 
|-
 
|-
 
| 80 || OpenSaveDataMetaFile
 
| 80 || OpenSaveDataMetaFile
Line 155: Line 163:  
|-
 
|-
 
| 85 || [9.0.0+] [[#OpenSaveDataTransferManagerForSaveDataRepair]]
 
| 85 || [9.0.0+] [[#OpenSaveDataTransferManagerForSaveDataRepair]]
 +
|-
 +
| 86 || [10.0.0+] [[#OpenSaveDataMover]]
 +
|-
 +
| 87 || [11.0.0+] [[#OpenSaveDataTransferManagerForRepair]]
 
|-
 
|-
 
| 100 || OpenImageDirectoryFileSystem
 
| 100 || OpenImageDirectoryFileSystem
 +
|-
 +
| 101 || [11.0.0+] OpenBaseFileSystem
 +
|-
 +
| 102 || [12.0.0+] FormatBaseFileSystem
 
|-
 
|-
 
| 110 || [[#OpenContentStorageFileSystem]]
 
| 110 || [[#OpenContentStorageFileSystem]]
 
|-
 
|-
| 120 || [6.0.0+] [[#OpenCloudBackupWorkStorageFileSystem]]
+
| 120 || [6.0.0-9.2.0] [[#OpenCloudBackupWorkStorageFileSystem]]
 
|-
 
|-
 
| 130 || [7.0.0+] [[#OpenCustomStorageFileSystem]]
 
| 130 || [7.0.0+] [[#OpenCustomStorageFileSystem]]
Line 175: Line 191:  
|-
 
|-
 
| 205 || [7.0.0+] [[#OpenDataStorageWithProgramIndex]]
 
| 205 || [7.0.0+] [[#OpenDataStorageWithProgramIndex]]
 +
|-
 +
| 206 || [13.0.0+] OpenDataStorageByPath
 +
|-
 +
| 207 || [15.0.0+] OpenDataFileSystemByDataId
 
|-
 
|-
 
| 400 || [[#OpenDeviceOperator]]
 
| 400 || [[#OpenDeviceOperator]]
Line 246: Line 266:  
| 810 || [7.0.0+] RegisterProgramIndexMapInfo
 
| 810 || [7.0.0+] RegisterProgramIndexMapInfo
 
|-
 
|-
| 1000 || SetBisRootForHost
+
| 1000 || [1.0.0-9.2.0] SetBisRootForHost
 
|-
 
|-
 
| 1001 || [[#SetSaveDataSize]]
 
| 1001 || [[#SetSaveDataSize]]
Line 273: Line 293:  
|-
 
|-
 
| 1013 || [9.0.0+] UnsetSaveDataRootPath
 
| 1013 || [9.0.0+] UnsetSaveDataRootPath
 +
|-
 +
| 1014 || [10.0.0-10.2.0] OutputMultiProgramTagAccessLog
 +
|-
 +
| 1016 || [11.0.0+] FlushAccessLogOnSdCard
 +
|-
 +
| 1017 || [11.0.0+] OutputApplicationInfoAccessLog
 +
|-
 +
| 1018 || [13.0.0+] SetDebugOption
 +
|-
 +
| 1019 || [13.0.0+] UnsetDebugOption
 
|-
 
|-
 
| 1100 || [4.0.0+] OverrideSaveDataTransferTokenSignVerificationKey
 
| 1100 || [4.0.0+] OverrideSaveDataTransferTokenSignVerificationKey
Line 279: Line 309:  
|-
 
|-
 
| 1200 || [6.0.0+] [[#OpenMultiCommitManager]]
 
| 1200 || [6.0.0+] [[#OpenMultiCommitManager]]
 +
|-
 +
| 1300 || [10.0.0+] [[#OpenBisWiper]]
 +
|-
 +
| 1400 || [15.0.0+] NotifyErrorContextServiceReady
 
|}
 
|}
   Line 295: Line 329:  
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! AccessibilityType || Mask || Name || Value || Used by
+
! AccessibilityType || Name || Mask || Permission || Used by
 +
|-
 +
| 0x0 || CanMountLogo || 0x8000000000000801 || R- || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
 +
|-
 +
| 0x1 || CanMountContentMeta || 0x8000000000000801 || R- || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
 +
|-
 +
| 0x2 || CanMountContentControl || 0x8000000000000801 || R- || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
 +
|-
 +
| 0x3 || CanMountContentManual || 0x8000000000000801 || R- || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
 +
|-
 +
| 0x4 || CanMountContentData || 0x8000000000000801 || R- || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
 
|-
 
|-
| 0x0 || 0x8000000000000801 || CanMountLogo || 1 || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
+
| 0x5 || CanMountApplicationPackage || 0x8000000000000801 || R- || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
 
|-
 
|-
| 0x1 || 0x8000000000000801 || CanMountContentMeta || 1 || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
+
| 0x6 || CanMountSaveDataStorage || 0x8000000000000000 || RW ||
 
|-
 
|-
| 0x2 || 0x8000000000000801 || CanMountContentControl || 1 || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
+
| 0x7 || CanMountContentStorage || 0x8000000000000800 || RW || [[#OpenContentStorageFileSystem]]
 
|-
 
|-
| 0x3 || 0x8000000000000801 || CanMountContentManual || 1 || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
+
| 0x8 || CanMountImageAndVideoStorage ||0x8000000000001000 || RW || [[#OpenImageDirectoryFileSystem]]
 
|-
 
|-
| 0x4 || 0x8000000000000801 || CanMountContentData || 1 || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
+
| ([1.0.0-5.1.0] 0x9) || || 0x8000000000000084 || ||  
 
|-
 
|-
| 0x5 || 0x8000000000000801 || CanMountApplicationPackage || 1 || [[#OpenFileSystem]], [[#OpenFileSystemWithPatch]], [[#OpenFileSystemWithId]]
+
| ([6.0.0-9.2.0] 0x9) || CanMountCloudBackupWorkStorage || 0x8000000200000000 || RW || OpenCloudBackupWorkStorageFileSystem
 
|-
 
|-
| 0x6 || 0x8000000000000000 || CanMountSaveDataStorage || 3 ||
+
| 0x9 || CanMountCustomStorage0 || 0x8000000000000000 || RW || OpenCustomStorageFileSystem
 
|-
 
|-
| 0x7 || 0x8000000000000800 || CanMountContentStorage || 3 || [[#OpenContentStorageFileSystem]]
+
| ([1.0.0-5.1.0] 0xA) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0x8 || 0x8000000000001000 || CanMountImageAndVideoStorage || 3 || [[#OpenImageDirectoryFileSystem]]
+
| ([6.0.0-6.2.0] 0xA) || || 0x8000000000000084 || ||
 
|-
 
|-
| 0x9 || 0x8000000200000000<br/>([1.0.0-5.1.0] 0x8000000000000084) || CanMountCloudBackupWorkStorage || 3 || OpenCloudBackupWorkStorageFileSystem
+
| ([7.0.0-7.0.1] 0xA) || || 0x4000000000000000 || ||
 
|-
 
|-
| 0xA || 0x8000000000000000<br/>([7.0.0-7.0.1] 0x4000000000000000)<br/>([6.0.0-6.2.0] 0x8000000000000084)<br/>([1.0.0-5.1.0] 0x8000000000000080) || CanMountCustomStorage0 || 3 || OpenCustomStorageFileSystem
+
| ([8.0.0-9.2.0] 0xA) || || 0x8000000000000000 || ||
 
|-
 
|-
| 0xB || 0x8000000000000084<br/>([6.0.0-6.2.0] 0x8000000000000080)<br/>([1.0.0-5.1.0] 0x8000000000008080) || CanMountBisCalibrationFile || 3 || [[#OpenBisFileSystem]]
+
| 0xA || CanMountBisCalibrationFile || 0x8000000000000084 || RW || [[#OpenBisFileSystem]]
 
|-
 
|-
| 0xC || 0x8000000000000080<br/>([1.0.0-6.2.0] 0x8000000000008080) || CanMountBisSafeMode || 3 || [[#OpenBisFileSystem]]
+
| ([1.0.0-5.1.0] 0xB) || || 0x8000000000008080 || ||
 
|-
 
|-
| 0xD || 0x8000000000008080<br/>([1.0.0-5.1.0] 0x8000000000000080) || CanMountBisUser || 3 || [[#OpenBisFileSystem]]
+
| ([6.0.0-6.2.0] 0xB) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0xE || 0x8000000000008080<br/>([3.0.0-6.2.0] 0x8000000000000080)<br/>([1.0.0-2.3.0] 0xC000000000200000) || CanMountBisSystem || 3 || [[#OpenBisFileSystem]]
+
| ([7.0.0-9.2.0] 0xB) || || 0x8000000000000084 || ||
 
|-
 
|-
| 0xF || 0x8000000000000080<br/>([3.0.0-5.1.0] 0xC000000000200000)<br/>([1.0.0-2.3.0] 0x8000000000000010) || CanMountBisSystemProperEncryption || 3 || [[#OpenBisFileSystem]]
+
| 0xB || CanMountBisSafeMode || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
 
|-
 
|-
| 0x10 || 0x8000000000000080<br/>([6.0.0-6.2.0] 0xC000000000200000<br/>([3.0.0-5.1.0] 0x8000000000000010)<br/>([1.0.0-2.3.0] 0x8000000000040020) || CanMountBisSystemProperPartition || 3 || [[#OpenBisFileSystem]]
+
| ([1.0.0-6.2.0] 0xC) || || 0x8000000000008080 || ||
 
|-
 
|-
| 0x11 || 0xC000000000200000<br/>([6.0.0-6.2.0] 0x8000000000000010)<br/>([3.0.0-5.1.0] 0x8000000000040020)<br/>([1.0.0-2.3.0] 0x8000000000000028) || CanMountSdCard || 3 || [[#OpenSdCardFileSystem]]
+
| ([7.0.0-9.2.0] 0xC) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0x12 || 0x8000000000000010<br/>([6.0.0-6.2.0] 0x8000000000040020)<br/>([3.0.0-5.1.0] 0x8000000000000028)<br/>([1.0.0-2.3.0] 0x8000000000000020) || CanMountGameCard || 3 || [[#OpenGameCardFileSystem]]
+
| 0xC || CanMountBisUser || 0x8000000000008080 || RW || [[#OpenBisFileSystem]]
 
|-
 
|-
| 0x13 || 0x8000000000040020<br/>([6.0.0-6.2.0] 0x8000000000000028)<br/>([1.0.0-5.1.0] 0x8000000000000020) || CanMountDeviceSaveData || 3 || [[#OpenSaveDataFileSystem]]
+
| ([1.0.0-5.1.0] 0xD) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0x14 || 0x8000000000000028<br/>([3.0.0-6.2.0] 0x8000000000000020)<br/>([1.0.0-2.3.0] 0x8000000000010082) || CanMountSystemSaveData || 3 || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
+
| ([6.0.0-9.2.0] 0xD) || || 0x8000000000008080 || ||
 
|-
 
|-
| 0x15 || 0x8000000000000020<br/>([3.0.0-5.1.0] 0x8000000000010082)<br/>([1.0.0-2.3.0] 0x8000000000010080) || CanMountOthersSaveData || 3 || [[#OpenSaveDataFileSystem]]
+
| 0xD || CanMountBisSystem || 0x8000000000008080 || RW || [[#OpenBisFileSystem]]
 
|-
 
|-
| 0x16 || 0x8000000000000020<br/>([6.0.0-6.2.0] 0x8000000000010082)<br/>([1.0.0-5.1.0] 0x8000000000010080) || CanMountOthersSystemSaveData || 3 || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
+
| ([1.0.0-2.3.0] 0xE) || || 0xC000000000200000 || ||
 
|-
 
|-
| 0x17 || 0x8000000000010082<br/>([6.0.0-6.2.0] 0x8000000000010080)<br/>([3.0.0-5.1.0] 0x8000000000000080)<br/>([1.0.0-2.3.0] 0x8000000000010080) || CanOpenBisPartitionBootPartition1Root || 3 || [[#OpenBisStorage]]
+
| ([3.0.0-6.2.0] 0xE) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0x18 || 0x8000000000010080<br/>([6.0.0-6.2.0] 0x8000000000000080)<br/>([1.0.0-5.1.0] 0x8000000000010080) || CanOpenBisPartitionBootPartition2Root || 3 || [[#OpenBisStorage]]
+
| ([7.0.0-9.2.0] 0xE) || || 0x8000000000008080 || ||
 
|-
 
|-
| 0x19 || 0x8000000000000080<br/>([6.0.0-6.2.0] 0x8000000000010080) || CanOpenBisPartitionUserDataRoot || 3 || [[#OpenBisStorage]]
+
| 0xE || CanMountBisSystemProperEncryption || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
 
|-
 
|-
| 0x1A || 0x8000000000010080 || CanOpenBisPartitionBootConfigAndPackage2Part1 || 3 || [[#OpenBisStorage]]
+
| ([1.0.0-2.3.0] 0xF) || || 0x8000000000000010 || ||
 
|-
 
|-
| 0x1B || 0x8000000000010080 || CanOpenBisPartitionBootConfigAndPackage2Part2 || 3 || [[#OpenBisStorage]]
+
| ([3.0.0-5.1.0] 0xF) || || 0xC000000000200000 || ||
 
|-
 
|-
| 0x1C || 0x8000000000010080 || CanOpenBisPartitionBootConfigAndPackage2Part3 || 3 || [[#OpenBisStorage]]
+
| ([6.0.0-9.2.0] 0xF) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0x1D || 0x8000000000010080<br/>([1.0.0-2.3.0] 0x8000000000000084) || CanOpenBisPartitionBootConfigAndPackage2Part4 || 3 || [[#OpenBisStorage]]
+
| 0xF || CanMountBisSystemProperPartition || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
 
|-
 
|-
| 0x1E || 0x8000000000010080<br/>([1.0.0-5.1.0] 0x8000000000000084) || CanOpenBisPartitionBootConfigAndPackage2Part5 || 3 || [[#OpenBisStorage]]
+
| ([1.0.0-2.3.0] 0x10) || || 0x8000000000040020 || ||
 
|-
 
|-
| 0x1F || 0x8000000000010080<br/>([6.0.0-6.2.0] 0x8000000000000084)<br/>([1.0.0-2.3.0] 0x8000000000000080) || CanOpenBisPartitionBootConfigAndPackage2Part6 || 3 || [[#OpenBisStorage]]
+
| ([3.0.0-5.1.0] 0x10) || || 0x8000000000000010 || ||
 
|-
 
|-
| 0x20 || 0x8000000000000084<br/>([1.0.0-5.1.0] 0x8000000000000080) || CanOpenBisPartitionCalibrationBinary || 3 || [[#OpenBisStorage]]
+
| ([6.0.0-6.2.0] 0x10) || || 0xC000000000200000 || ||
 
|-
 
|-
| 0x21 || 0x8000000000000084<br/>([6.0.0-6.2.0] 0x8000000000000080) || CanOpenBisPartitionCalibrationFile || 3 || [[#OpenBisStorage]]
+
| ([7.0.0-9.2.0] 0x10) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0x22 || 0x8000000000000080 || CanOpenBisPartitionSafeMode || 3 || [[#OpenBisStorage]]
+
| 0x10 || CanMountSdCard || 0xC000000000200000 || RW || [[#OpenSdCardFileSystem]]
 
|-
 
|-
| 0x23 || 0x8000000000000080<br/>([1.0.0-2.3.0] 0xC000000000200000) || CanOpenBisPartitionUser || 3 || [[#OpenBisStorage]]
+
| ([1.0.0-2.3.0] 0x11) || || 0x8000000000000028 || ||
 
|-
 
|-
| 0x24 || 0x8000000000000080<br/>([1.0.0-2.3.0] 0x8000000000000100) || CanOpenBisPartitionSystem || 3 || [[#OpenBisStorage]]
+
| ([3.0.0-5.1.0] 0x11) || || 0x8000000000040020 || ||
 
|-
 
|-
| 0x25 || 0x8000000000000080<br/>([3.0.0-5.1.0] 0xC000000000200000)<br/>([1.0.0-2.3.0] 0x8000000000100008) || CanOpenBisPartitionSystemProperEncryption || 3 || [[#OpenBisStorage]]
+
| ([6.0.0-6.2.0] 0x11) || || 0x8000000000000010 || ||
 
|-
 
|-
| 0x26 || 0x8000000000000080<br/>([6.0.0-6.2.0] 0xC000000000200000)<br/>([3.0.0-5.1.0] 0x8000000000000100)<br/>([1.0.0-2.3.0] 0xC000000000400000) || CanOpenBisPartitionSystemProperPartition || 3 || [[#OpenBisStorage]]
+
| ([7.0.0-9.2.0] 0x11) || || 0xC000000000200000 || ||
 
|-
 
|-
| [3.0.0+] 0x27 || 0xC000000000200000<br/>([6.0.0-6.2.0] 0x8000000000000100)<br/>([3.0.0-5.1.0] 0x8000000000100008) || CanOpenSdCardStorage || ||
+
| 0x11 || CanMountGameCard || 0x8000000000000010 || R- || [[#OpenGameCardFileSystem]]
 
|-
 
|-
| [3.0.0+] 0x28 || 0x8000000000000100<br/>([6.0.0-6.2.0] 0x8000000000100008)<br/>([3.0.0-5.1.0] 0xC000000000400000) || CanOpenGameCardStorage || 3 || [[#OpenGameCardStorage]], [[#EraseGameCard]] (bit1), [[#WriteToGameCard]] (bit1), [[#GetGameCardErrorInfo]] (bit1), [[#EraseAndWriteParamDirectly]] (bit1), [[#ReadParamDirectly]] (bit1), [[#ForceEraseGameCard]] (bit1)
+
| ([1.0.0-2.3.0] 0x12) || || 0x8000000000000020 || ||
 
|-
 
|-
| [4.0.0+] 0x29 || 0x8000000000100008<br/>([6.0.0-6.2.0] 0xC000000000400000)<br/>([4.0.0-5.1.0] 0x8000000000010000) || CanMountSystemDataPrivate || 1 || [[#OpenFileSystem]], [[#OpenDataStorageByDataId]]
+
| ([3.0.0-5.1.0] 0x12) || || 0x8000000000000028 || ||
 
|-
 
|-
| [5.0.0+] 0x2A || 0xC000000000400000<br/>([6.0.0-6.2.0] 0x8000000000010000)<br/>([5.0.0-5.1.0] 0x8000000000000000) || CanMountHost || 3 || [[#OpenHostFileSystem]]
+
| ([6.0.0-6.2.0] 0x12) || || 0x8000000000040020 || ||
 
|-
 
|-
| [6.0.0+] 0x2B || 0x8000000000010000<br/>([6.0.0-6.2.0] 0x8000000000000000) || CanMountRegisteredUpdatePartition || 1 || [[#OpenRegisteredUpdatePartition]]
+
| ([7.0.0-9.2.0] 0x12) || || 0x8000000000000010 || ||
 
|-
 
|-
| [7.0.0+] 0x2C || 0x8000000000000000 || CanOpenSaveDataInternalStorage || 3 || [[#OpenSaveDataInternalStorageFileSystem]]
+
| 0x12 || CanMountDeviceSaveData || 0x8000000000040020 || RW || [[#OpenSaveDataFileSystem]]
 
|-
 
|-
| [7.0.0+] 0x2D || 0x0000000000000000 || CanNotMountCustomStorage || 3 || OpenCustomStorageFileSystem
+
| ([1.0.0-5.1.0] 0x13) || || 0x8000000000000020 || ||
|}
  −
 
  −
=== Call ===
  −
{| class="wikitable" border="1"
   
|-
 
|-
! OperationType || Mask || Name || Used by
+
| ([6.0.0-6.2.0] 0x13) || || 0x8000000000000028 || ||
 
|-
 
|-
| 0x0 || 0x8000000000000080 || CanInvalidateBisCache || [[#InvalidateBisCache]]
+
| ([7.0.0-9.2.0] 0x13) || || 0x8000000000040020 || ||
 
|-
 
|-
| 0x1 || 0x8000000000000080 || CanEraseMmc || EraseMmc
+
| 0x13 || CanMountSystemSaveData || 0x8000000000000028 || RW || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
 
|-
 
|-
| 0x2 || 0x8000000000000010 || CanGetGameCardDeviceCertificate || GetGameCardDeviceCertificate
+
| ([1.0.0-2.3.0] 0x14) || || 0x8000000000010082 || ||
 
|-
 
|-
| 0x3 || 0x8000000000000010 || CanGetGameCardIdSet || GetGameCardIdSet
+
| ([3.0.0-6.2.0] 0x14) || || 0x8000000000000020 || ||
 
|-
 
|-
| 0x4 || 0x8000000000000200 || CanFinalizeGameCardDriver || FinalizeGameCardDriver
+
| ([7.0.0-9.2.0] 0x14) || || 0x8000000000000028 || ||
 
|-
 
|-
| 0x5 || 0x8000000000000200 || CanGetGameCardAsicInfo || GetGameCardAsicInfo
+
| 0x14 || CanMountOthersSaveData || 0x8000000000000020 || RW || [[#OpenSaveDataFileSystem]]
 
|-
 
|-
| 0x6 || 0x8000000000002020 || CanCreateSaveData || [[#CreateSaveDataFileSystem]]
+
| ([1.0.0-2.3.0] 0x15) || || 0x8000000000010080 || ||
 
|-
 
|-
| 0x7 || 0x8000000000000060 || CanDeleteSaveData || [[#DeleteSaveDataFileSystem]], RegisterSaveDataFileSystemAtomicDeletion
+
| ([3.0.0-5.1.0] 0x15) || || 0x8000000000010082 || ||
 
|-
 
|-
| 0x8 || 0x8000000000000028 || CanCreateSystemSaveData || CreateSaveDataFileSystemBySystemSaveDataId
+
| ([6.0.0-9.2.0] 0x15) || || 0x8000000000000020 || ||
 
|-
 
|-
| 0x9 || 0x8000000000000020 || CanCreateOthersSystemSaveData || CreateSaveDataFileSystemBySystemSaveDataId
+
| 0x15 || CanMountOthersSystemSaveData || 0x8000000000000020 || RW || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
 
|-
 
|-
| 0xA || 0x8000000000004028 || CanDeleteSystemSaveData || [[#DeleteSaveDataFileSystem]], RegisterSaveDataFileSystemAtomicDeletion
+
| ([1.0.0-5.1.0] 0x16) || || 0x8000000000010080 || ||
 
|-
 
|-
| 0xB || 0x8000000000000060 || CanOpenSaveDataInfoReader || [[#OpenSaveDataInfoReaderBySaveDataSpaceId]], [[#OpenSaveDataInfoReader]]
+
| ([6.0.0-6.2.0] 0x16) || || 0x8000000000010082 || ||
 
|-
 
|-
| 0xC || 0x8000000000004020 || CanOpenSaveDataInfoReaderForSystem || [[#OpenSaveDataInfoReaderBySaveDataSpaceId]], [[#OpenSaveDataInfoReader]]
+
| ([7.0.0-9.2.0] 0x16) || || 0x8000000000000020 || ||
 
|-
 
|-
| 0xD || 0x8000000000000040<br/>([1.0.0-5.1.0] 0x8000000000020000) || CanOpenSaveDataInfoReaderForInternal || [[#OpenSaveDataInfoReaderWithFilter]]
+
| 0x16 || CanOpenBisPartitionBootPartition1Root || 0x8000000000010082 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| 0xE || 0x8000000000020000<br/>([1.0.0-5.1.0] 0x8000000000000400) || CanOpenSaveDataMetaFile || OpenSaveDataMetaFile
+
| ([1.0.0-2.3.0] 0x17) || || 0x8000000000010080 || ||
 
|-
 
|-
| 0xF || 0x8000000000000400<br/>([1.0.0-5.1.0] 0x8000000000004060) || CanSetCurrentPosixTime || SetCurrentPosixTime, SetCurrentPosixTimeWithTimeDifference
+
| ([3.0.0-5.1.0] 0x17) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0x10 || 0x8000000000004060<br/>([1.0.0-5.1.0] 0x8000000000080000) || CanReadSaveDataFileSystemExtraData || [[#ReadSaveDataFileSystemExtraData]]
+
| ([6.0.0-6.2.0] 0x17) || || 0x8000000000010080 || ||
 
|-
 
|-
| 0x11 || 0x8000000000080000 || CanSetGlobalAccessLogMode || [[#SetGlobalAccessLogMode]]
+
| ([7.0.0-9.2.0] 0x17) || || 0x8000000000010082 || ||
 
|-
 
|-
| 0x12 || 0x8000000000080000<br/>([1.0.0-5.1.0] Invalid) || CanSetSpeedEmulationMode || SetSpeedEmulationMode
+
| 0x17 || CanOpenBisPartitionBootPartition2Root || 0x8000000000010080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| 0x13 || Invalid<br/>([1.0.0-5.1.0] 0xC000000000800000) || ||  
+
| ([1.0.0-5.1.0] 0x18) || || 0x8000000000010080 || ||
 
|-
 
|-
| 0x14 || 0xC000000000800000<br/>([1.0.0-5.1.0] 0xC000000001000000) || CanFillBis || CreatePaddingFile, DeleteAllPaddingFiles
+
| ([6.0.0-6.2.0] 0x18) || || 0x8000000000000080 || ||
 
|-
 
|-
| 0x15 || 0xC000000001000000<br/>([5.0.0-5.1.0] 0x8000000001000060)<br/>([1.0.0-4.1.0] 0xC000000002000000) || CanCorruptSaveData || CorruptSaveDataFileSystem, CorruptSaveDataFileSystemBySaveDataSpaceId
+
| ([7.0.0-9.2.0] 0x18) || || 0x8000000000010080 || ||
 
|-
 
|-
| [2.0.0+] 0x16 || 0x8000000001000060<br/>([5.0.0-5.1.0] 0x8000000000000060)<br/>([2.0.0-4.1.0] 0x8000000004000000) || CanCorruptSystemSaveData || CorruptSaveDataFileSystem, CorruptSaveDataFileSystemBySaveDataSpaceId
+
| 0x18 || CanOpenBisPartitionUserDataRoot || 0x8000000000000080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [2.0.0+] 0x17 || 0x8000000000000060<br/>([5.0.0-5.1.0] 0xC000000002000000)<br/>([2.0.0-4.1.0] 0x8000000008000000) || CanVerifySaveData || [[#VerifySaveDataFileSystem]], VerifySaveDataFileSystemBySaveDataSpaceId
+
| ([6.0.0-6.2.0] 0x19) || || 0x8000000000010080 || ||
 
|-
 
|-
| [2.0.0+] 0x18 || 0xC000000002000000<br/>([5.0.0-5.1.0] 0x8000000004000000)<br/>([2.0.0-4.1.0] 0x8000000010000000) || CanDebugSaveData || [[#CreateSaveDataFileSystem]], [[#OpenSaveDataFileSystem]], [[#SetSaveDataRootPath]]
+
| ([7.0.0-9.2.0] 0x19) || || 0x8000000000000080 || ||
 
|-
 
|-
| [2.0.0+] 0x19 || 0x8000000004000000<br/>([5.0.0-5.1.0] 0x8000000008000000)<br/>([2.0.0-4.1.0] 0x8000000000000800) || CanFormatSdCard || FormatSdCardFileSystem
+
| 0x19 || CanOpenBisPartitionBootConfigAndPackage2Part1 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [2.0.0+] 0x1A || 0x8000000008000000<br/>([5.0.0-5.1.0] 0x8000000010000000)<br/>([2.0.0-4.1.0] 0x8000000000004020) || CanGetRightsId || GetRightsId, GetRightsIdAndKeyGenerationByPath, GetRightsIdByPath
+
| ([1.0.0-9.2.0] 0x1A) || || 0x8000000000010080 || ||
 
|-
 
|-
| [3.0.0+] 0x1B || 0x8000000010000000<br/>([5.0.0-5.1.0] 0x8000000000000800)<br/>([3.0.0-4.1.0] 0x8000000000002020) || CanRegisterExternalKey || RegisterExternalKey, UnregisterAllExternalKey
+
| 0x1A || CanOpenBisPartitionBootConfigAndPackage2Part2 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [3.0.0+] 0x1C || 0x8000000000000800<br/>([5.0.0-5.1.0] 0x8000000000004020)<br/>([3.0.0-4.1.0] 0x8000000000000028) || CanSetEncryptionSeed || [[#SetSdCardEncryptionSeed]]
+
| ([1.0.0-9.2.0] 0x1B) || || 0x8000000000010080 || ||
 
|-
 
|-
| [4.0.0+] 0x1D || 0x8000000000000020<br/>([5.0.0-5.1.0] 0x8000000000000000)<br/>([4.0.0-4.1.0] 0x8000000020000000) || CanWriteSaveDataFileSystemExtraDataTimeStamp || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
+
| 0x1B || CanOpenBisPartitionBootConfigAndPackage2Part3 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [4.0.0+] 0x1E || 0x8000000000004020<br/>([5.0.0-5.1.0] 0x8000000000002020)<br/>([4.0.0-4.1.0] 0x8000000040000000) || CanWriteSaveDataFileSystemExtraDataFlags || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
+
| ([1.0.0-9.2.0] 0x1C) || || 0x8000000000010080 || ||
 
|-
 
|-
| [4.0.0+] 0x1F || 0x8000000000000020<br/>([5.0.0-5.1.0] 0x8000000000000028)<br/>([4.0.0-4.1.0] 0x8000000000000000) || CanWriteSaveDataFileSystemExtraDataCommitId || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
+
| 0x1C || CanOpenBisPartitionBootConfigAndPackage2Part4 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [4.0.0+] 0x20 || 0x8000000000000000<br/>([5.0.0-5.1.0] 0x8000000020000000)<br/>([4.0.0-4.1.0] 0x8000000000000000) || CanWriteSaveDataFileSystemExtraDataAll || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
+
| ([1.0.0-2.3.0] 0x1D) || || 0x8000000000000084 || ||
 
|-
 
|-
| [5.0.0+] 0x21 || 0x8000000000002020<br/>([1.0.0-5.1.0] 0x8000000040000000) || CanExtendSaveData || ExtendSaveDataFileSystem
+
| ([3.0.0-9.2.0] 0x1D) || || 0x8000000000010080 || ||
 
|-
 
|-
| [5.0.0+] 0x22 || 0x8000000000000028<br/>([1.0.0-5.1.0] 0x0000000080000002) || CanExtendSystemSaveData || ExtendSaveDataFileSystem
+
| 0x1D || CanOpenBisPartitionBootConfigAndPackage2Part5 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [5.0.0+] 0x23 || 0x8000000020000000<br/>([1.0.0-5.1.0] 0x8000000000000000) || CanRegisterUpdatePartition || RegisterUpdatePartition
+
| ([1.0.0-5.1.0] 0x1E) || || 0x8000000000000084 || ||
 
|-
 
|-
| [5.0.0+] 0x24 || 0x8000000040000000<br/>([1.0.0-5.1.0] 0x8000000000000000) || CanOpenSaveDataTransferManager || [[#OpenSaveDataTransferManager]]
+
| ([6.0.0-9.2.0] 0x1E) || || 0x8000000000010080 || ||
 
|-
 
|-
| [5.0.0+] 0x25 || 0x8000000200000000<br/>([1.0.0-5.1.0] 0x8000000080200000) || CanOpenSaveDataTransferManagerVersion2 || [[#OpenSaveDataTransferManagerVersion2]]
+
| 0x1E || CanOpenBisPartitionBootConfigAndPackage2Part6 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [5.0.0+] 0x26 || 0x8000000200000000<br/>([6.0.0-8.1.0] 0x8000000200002000)<br/>([5.0.0-5.1.0] 0x8000000080000110) || CanOpenSaveDataTransferManagerForSaveDataRepair || OpenSaveDataTransferManagerForSaveDataRepair
+
| ([1.0.0-5.1.0] 0x1F) || || 0x8000000000000080 || ||
 
|-
 
|-
| [5.0.0+] 0x27 || 0x8000000000000000<br/>([8.0.0-8.1.0] 0x8000000240002000)<br/>([6.0.0-7.0.1] 0x8000000200002000)<br/>([5.0.0-5.1.0] 0x8000000000100008) || CanOpenSaveDataTransferManagerForSaveDataRepairTool || OpenSaveDataTransferManagerForSaveDataRepair
+
| ([6.0.0-6.2.0] 0x1F) || || 0x8000000000000084 || ||
 
|-
 
|-
| [5.0.0+] 0x28 || 0x8000000200002000<br/>([6.0.0-8.1.0] 0x8000000000000000)<br/>([5.0.0-5.1.0] 0x8000000080010000) || CanOpenOpenSaveDataTransferProhibiter || [[#OpenSaveDataTransferProhibiter]]
+
| ([7.0.0-9.2.0] 0x1F) || || 0x8000000000010080 || ||
 
|-
 
|-
| [5.0.0+] 0x29 || 0x8000000240002000<br/>([6.0.0-8.1.0] 0x8000000000000000)<br/>([5.0.0-5.1.0] 0x0000000080000001) || CanListAccessibleSaveDataOwnerId || [[#ListAccessibleSaveDataOwnerId]]
+
| 0x1F || CanOpenBisPartitionCalibrationBinary || 0x8000000000000084 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [5.0.0+] 0x2A || 0x8000000000000000<br/>([6.0.0-8.1.0] 0x8000000080200000)<br/>([5.0.0-5.1.0] 0x0000000080000001) || CanControlMmcPatrol || SuspendMmcPatrol, ResumeMmcPatrol
+
| ([1.0.0-5.1.0] 0x20) || || 0x8000000000000080 || ||
 
|-
 
|-
| [5.0.0+] 0x2B || 0x8000000000000000<br/>([6.0.0-8.1.0] 0x8000000080000110)<br/>([5.0.0-5.1.0] 0x0000000080000001) || CanOverrideSaveDataTransferTokenSignVerificationKey || OverrideSaveDataTransferTokenSignVerificationKey
+
| ([6.0.0-9.2.0] 0x20) || || 0x8000000000000084 || ||
 
|-
 
|-
| [5.0.0+] 0x2C || 0x8000000080200000<br/>([6.0.0-8.1.0] 0x8000000000100008)<br/>([5.0.0-5.1.0] 0x0000000080000001) || CanOpenSdCardDetectionEventNotifier || [[#OpenSdCardDetectionEventNotifier]]
+
| 0x20 || CanOpenBisPartitionCalibrationFile || 0x8000000000000084 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [5.0.0+] 0x2D || 0x8000000080000110<br/>([6.0.0-8.1.0] 0x8000000000010000)<br/>([5.0.0-5.1.0] 0x0000000080000001) || CanOpenGameCardDetectionEventNotifier || [[#OpenGameCardDetectionEventNotifier]]
+
| ([6.0.0-6.2.0] 0x21) || || 0x8000000000000080 || ||
 
|-
 
|-
| [5.0.0+] 0x2E || 0x8000000000100008<br/>([6.0.0-8.1.0] 0x8000000100000000)<br/>([5.0.0-5.1.0] 0x8000000040000000) || CanOpenSystemDataUpdateEventNotifier || OpenSystemDataUpdateEventNotifier
+
| ([7.0.0-9.2.0] 0x21) || || 0x8000000000000084 || ||
 
|-
 
|-
| [5.0.0+] 0x2F || 0x8000000000010000<br/>([6.0.0-8.1.0] 0x8000000100000000)<br/>([5.0.0-5.1.0] 0x8000000080200000) || CanNotifySystemDataUpdateEvent || NotifySystemDataUpdateEvent
+
| 0x21 || CanOpenBisPartitionSafeMode || 0x8000000000000080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [5.1.0+] 0x30 || 0x8000000100000000<br/>([5.1.0-6.0.0] 0x8000000080080000) || CanOpenAccessFailureDetectionEventNotifier || [[#OpenAccessFailureDetectionEventNotifier]]
+
| ([1.0.0-9.2.0] 0x22) || || 0x8000000000000080 || ||
 
|-
 
|-
| [6.0.0+] 0x31 || 0x8000000100000000 || CanGetAccessFailureDetectionEvent || GetAccessFailureDetectionEvent
+
| 0x22 || CanOpenBisPartitionUser || 0x8000000000000080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [6.0.0+] 0x32 || 0x8000000100000000 || CanIsAccessFailureDetected || IsAccessFailureDetected
+
| ([1.0.0-2.3.0] 0x23) || || 0xC000000000200000 || ||
 
|-
 
|-
| [6.0.0+] 0x33 || 0x8000000100000000<br/>([6.0.0-8.1.0] 0x8000000040000000) || CanResolveAccessFailure || ResolveAccessFailure
+
| ([3.0.0-9.2.0] 0x23) || || 0x8000000000000080 || ||
 
|-
 
|-
| [6.0.0+] 0x34 || 0x8000000100000000<br/>([6.0.0-8.1.0] 0x8000000200000020) || CanAbandonAccessFailure || AbandonAccessFailure
+
| 0x23 || CanOpenBisPartitionSystem || 0x8000000000000080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [6.0.0+] 0x35 || 0x8000000040000000<br/>([6.0.0-8.1.0] 0x8000000000200000) || CanQuerySaveDataInternalStorageTotalSize || QuerySaveDataInternalStorageTotalSize
+
| ([1.0.0-2.3.0] 0x24) || || 0x8000000000000100 || ||
 
|-
 
|-
| [6.0.0+] 0x36 || 0x8000000200000020<br/>([6.0.0-8.1.0] 0x4000000000000000) || CanGetSaveDataCommitId || [[#GetSaveDataCommitId]]
+
| ([3.0.0-9.2.0] 0x24) || || 0x8000000000000080 || ||
 
|-
 
|-
| [6.0.0+] 0x37 || 0x8000000000200000<br/>([7.0.0-8.1.0] 0x8000000000000000)<br/>([6.0.0-6.2.0] 0x8000000000080000) || CanSetSdCardAccessibility || SetSdCardAccessibility
+
| 0x24 || CanOpenBisPartitionSystemProperEncryption || 0x8000000000000080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [6.0.0+] 0x38 || 0x4000000000000000<br/>([7.0.0-8.1.0] 0x8000000400000000)<br/>([6.0.0-6.2.0] 0x8000000000000000) || CanSimulateDevice || SimulateDeviceDetectionEvent, SetSimulationEvent, ClearSimulationEvent
+
| ([1.0.0-2.3.0] 0x25) || || 0x8000000000100008 || ||
 
|-
 
|-
| [8.0.0+] 0x39 || 0x8000000000000000<br/>([8.0.0-8.1.0] 0x8000000000000010) || CanCreateSaveDataWithHashSalt || [[#CreateSaveDataFileSystem]], [[#CreateSaveDataFileSystemWithHashSalt]]
+
| ([3.0.0-5.1.0] 0x25) || || 0xC000000000200000 || ||
 
|-
 
|-
| [9.0.0+] 0x3A || 0x8000000400000000 || CanRegisterProgramIndexMapInfo || RegisterProgramIndexMapInfo
+
| ([6.0.0-9.2.0] 0x25) || || 0x8000000000000080 || ||
 
|-
 
|-
| [9.0.0+] 0x3B || 0x8000000000000010 || CanChallengeCardExistence || ChallengeCardExistence
+
| 0x25 || CanOpenBisPartitionSystemProperPartition || 0x8000000000000080 || RW || [[#OpenBisStorage]]
 
|-
 
|-
| [9.0.0+] 0x3C || 0x8000000800000000 || CanCreateOwnSaveData || [[#CreateSaveDataFileSystem]], CreateSaveDataFileSystemWithHashSalt
+
| ([1.0.0-2.3.0] 0x26) || || 0xC000000000400000 || ||
 
|-
 
|-
| [9.0.0+] 0x3D || 0x8000000800000000 || CanReadOwnSaveDataFileSystemExtraData || [[#ReadSaveDataFileSystemExtraData]]
+
| ([3.0.0-5.1.0] 0x26) || || 0x8000000000000100 || ||
 
|-
 
|-
| [9.0.0+] 0x3E || 0x8000000800000000 || CanExtendOwnSaveData || ExtendSaveDataFileSystem
+
| ([6.0.0-6.2.0] 0x26) || || 0xC000000000200000 || ||
 
|-
 
|-
| [9.0.0+] 0x3F || 0x8000000800000000 || CanOpenOwnSaveDataTransferProhibiter || [[#OpenSaveDataTransferProhibiter]]
+
| ([7.0.0-9.2.0] 0x26) || || 0x8000000000000080 || ||
 
|-
 
|-
| [9.0.0+] 0x40 || 0x8000000800000000 || CanFindOwnSaveDataWithFilter || [[#FindSaveDataWithFilter]]
+
| ([10.0.0-14.1.2] 0x26) || || 0xC000000000200000 || ||
|}
+
|-
 
+
| 0x26 || CanOpenBisPartitionDeviceTreeBlob || 0x8000002000000080 || RW || [[#OpenBisStorage]]
== OpenFileSystem ==
+
|-
Takes a type-0x19 input [[#ContentPath]] and a [[#FileSystemProxyType]] as parameters. Returns an [[#IFileSystem]].
+
| ([3.0.0-5.1.0] 0x27) || || 0x8000000000100008 || ||
 
+
|-
[2.0.0+] This function was removed.
+
| ([6.0.0-6.2.0] 0x27) || || 0x8000000000000100 || ||
 
+
|-
== SetCurrentProcess ==
+
| ([7.0.0-9.2.0] 0x27) || || 0xC000000000200000 || ||
Takes a pid-descriptor.
+
|-
 
+
| ([10.0.0-14.1.2] 0x27) || || 0x8000000000000100 || ||
== OpenFileSystemWithPatch ==
+
|-
Takes an input [[#FileSystemProxyType]] and an u64 title-id. Returns an [[#IFileSystem]].
+
| [3.0.0+] 0x27 || CanOpenSdCardStorage || 0xC000000000200000 || RW ||
 
+
|-
Web-applet loads the [[#FileSystemProxyType]] (which must be '''Manual''') from u32_table[inparam].
+
| ([3.0.0-5.1.0] 0x28) || || 0xC000000000400000 || ||
 
+
|-
Note: web-applet strings refer to both this cmd and [[#OpenFileSystemWithId]] as "MountContent", but official nn_sf_sync symbols use "OpenXX" names.
+
| ([6.0.0-6.2.0] 0x28) || || 0x8000000000100008 || ||
 
+
|-
== OpenFileSystemWithId ==
+
| ([7.0.0-9.2.0] 0x28) || || 0x8000000000000100 || ||
Takes a type-0x19 input buffer, an [[#FileSystemProxyType]] and an u64 title-id. Returns an [[#IFileSystem]].
+
|-
 +
| ([10.0.0-14.1.2] 0x28) || || 0x8000000000100008 || ||
 +
|-
 +
| [3.0.0+] 0x28 || CanOpenGameCardStorage || 0x8000000000000100 || RW || [[#OpenGameCardStorage]], [[#EraseGameCard]] (bit1), [[#WriteToGameCard]] (bit1), [[#GetGameCardErrorInfo]] (bit1), [[#EraseAndWriteParamDirectly]] (bit1), [[#ReadParamDirectly]] (bit1), [[#ForceEraseGameCard]] (bit1)
 +
|-
 +
| ([4.0.0-5.1.0] 0x29) || || 0x8000000000010000 || ||
 +
|-
 +
| ([6.0.0-6.2.0] 0x29) || || 0xC000000000400000 || ||
 +
|-
 +
| ([7.0.0-9.2.0] 0x29) || || 0x8000000000100008 || ||
 +
|-
 +
| ([10.0.0-14.1.2] 0x29) || || 0xC000000000400000 || ||
 +
|-
 +
| [4.0.0+] 0x29 || CanMountSystemDataPrivate || 0x8000000000100008 || R- || [[#OpenFileSystem]], [[#OpenDataStorageByDataId]]
 +
|-
 +
| ([5.0.0-5.1.0] 0x2A) || || 0x8000000000000000 || ||
 +
|-
 +
| ([6.0.0-6.2.0] 0x2A) || || 0x8000000000010000 || ||
 +
|-
 +
| ([7.0.0-9.2.0] 0x2A) || || 0xC000000000400000 || ||
 +
|-
 +
| ([10.0.0-14.1.2] 0x2A) || || 0x8000000000010000 || ||
 +
|-
 +
| [5.0.0+] 0x2A || CanMountHost || 0xC000000000400000 || RW || [[#OpenHostFileSystem]]
 +
|-
 +
| ([6.0.0-6.2.0] 0x2B) || || 0x8000000000000000 || ||
 +
|-
 +
| ([7.0.0-9.2.0] 0x2B) || || 0x8000000000010000 || ||
 +
|-
 +
| ([10.0.0-14.1.2] 0x2B) || || 0x8000000000000000 || ||
 +
|-
 +
| [6.0.0+] 0x2B || CanMountRegisteredUpdatePartition || 0x8000000000010000 || R- || [[#OpenRegisteredUpdatePartition]]
 +
|-
 +
| ([7.0.0-9.2.0] 0x2C) || || 0x8000000000000000 || ||
 +
|-
 +
| ([10.0.0-10.2.0] 0x2C) || || 0x0000000000000000 || ||
 +
|-
 +
| ([11.0.0-14.1.2] 0x2C) || || 0xC000000000000000 || ||
 +
|-
 +
| [7.0.0+] 0x2C || CanOpenSaveDataInternalStorage || 0x8000000000000000 || RW || [[#OpenSaveDataInternalStorageFileSystem]]
 +
|-
 +
| ([7.0.0-9.2.0] 0x2D) || || 0x0000000000000000 || ||
 +
|-
 +
| ([10.0.0-10.2.0] 0x2D) || || 0x8000000000000000 || ||
 +
|-
 +
| [7.0.0+] 0x2D || CanMountTemporaryDirectory || 0xC000000000000000 || RW ||
 +
|-
 +
| ([11.0.0-14.1.2] 0x2E) || || 0x0000000000000000 || ||
 +
|-
 +
| [11.0.0+] 0x2E || CanMountAllBaseFilesystem || 0x8000000000000000 || RW || OpenBaseFileSystem
 +
|-
 +
| [15.0.0+] 0x2F || CanNotMount || 0x0000000000000000 || -- || OpenCustomStorageFileSystem
 +
|}
   −
The [[#IFileSystem]] must be '''Meta''' if the NCA type is 0.
+
=== Call ===
 
+
{| class="wikitable" border="1"
The input buffer is the output string path from [[NS_Services#GetApplicationContentPath|GetApplicationContentPath]].
+
|-
 
+
! OperationType || Name || Mask || Used by
May return errors when attempting to access NCA-paths for an update-title with a gamecard, when the gamecard isn't inserted. May return error 0x7D402 in some cases with update-titles. Non-val2 in32 values with NCA-type1 are unusable, even for normal titles.
+
|-
 
+
| 0x0 || CanInvalidateBisCache || 0x8000000000000080 || [[#InvalidateBisCache]]
The official "MountApplicationPackage" func uses this with in64=0 and [[#FileSystemProxyType]] '''Package'''.
+
|-
 
+
| 0x1 || CanEraseMmc || 0x8000000000000080 || EraseMmc
After the [[#FileSystemProxyType]] specific permissions are checked, it then gets the func retval for permissions-type 0x25 and func0.
+
|-
 
+
| 0x2 || CanGetGameCardDeviceCertificate || 0x8000000000000010 || GetGameCardDeviceCertificate
When [[#FileSystemProxyType]] is '''Meta''', it uses in64=0xffffffffffffffff internally, otherwise it checks if in64 is set to 0xffffffffffffffff then throws an error if so. When the in64 used internally is not 0xffffffffffffffff, it's compared with the NCA [[NCM_services#ProgramId|ProgramId]], then an error is thrown on mismatch.
+
|-
 
+
| 0x3 || CanGetGameCardIdSet || 0x8000000000000010 || GetGameCardIdSet
== OpenBisFileSystem ==
+
|-
Takes a type-0x19 input buffer string and a [[#BisPartitionId]]. Official user-process code sets instr[0] = 0 normally. Returns an [[#IFileSystem]].
+
| 0x4 || CanFinalizeGameCardDriver || 0x8000000000000200 || FinalizeGameCardDriver
 
+
|-
Only partitionIDs for FAT partitions are usable with this, otherwise error 0x2EE202 is returned. Seems to be about the same as [[#OpenBisStorage]] except this mounts the partition filesystem instead of allowing direct access to the partition sectors.
+
| 0x5 || CanGetGameCardAsicInfo || 0x8000000000000200 || GetGameCardAsicInfo
 
+
|-
== OpenBisStorage ==
+
| 0x6 || CanCreateSaveData || 0x8000000000002020 || [[#CreateSaveDataFileSystem]]
Takes a u32 partition ID, returns 0x2EE202 for partitions which do not exist, 0x320002 for partitions which cannot be opened and a valid [[#IStorage]] handle otherwise.
+
|-
 
+
| 0x7 || CanDeleteSaveData || 0x8000000000000060 || [[#DeleteSaveDataFileSystem]], RegisterSaveDataFileSystemAtomicDeletion
== InvalidateBisCache ==
+
|-
Seems to invalidate the Bis cache for MBR/GPT after overwriting that data via the OpenBisStorage IStorage. Used by [[SystemInitializer]].
+
| 0x8 || CanCreateSystemSaveData || 0x8000000000000028 || CreateSaveDataFileSystemBySystemSaveDataId
 
+
|-
== DeleteSaveDataFileSystem ==
+
| 0x9 || CanCreateOthersSystemSaveData || 0x8000000000000020 || CreateSaveDataFileSystemBySystemSaveDataId
Takes an input u64.
+
|-
 
+
| 0xA || CanDeleteSystemSaveData || 0x8000000000004028 || [[#DeleteSaveDataFileSystem]], RegisterSaveDataFileSystemAtomicDeletion
== CreateSaveDataFileSystem ==
+
|-
Takes a 0x40-byte [[#SaveDataAttribute]], a 0x40-byte [[#SaveDataCreationInfo]], and a 0x10-byte input struct.
+
| 0xB || CanOpenSaveDataInfoReader || 0x8000000000000060 || [[#OpenSaveDataInfoReaderBySaveDataSpaceId]], [[#OpenSaveDataInfoReader]]
 
+
|-
Only the first 0x5-bytes in the 0x10-byte struct are initialized: all-zero when automatically creating savedata during savecommon mount by official user-processes. In the dedicated save-creation code in official user-processes: +0 u32 = 0x40060, +4 u8 = 1.
+
| 0xC || CanOpenSaveDataInfoReaderForSystem || 0x8000000000004020 || [[#OpenSaveDataInfoReaderBySaveDataSpaceId]], [[#OpenSaveDataInfoReader]]
 
+
|-
Creates regular savedata.
+
| ([1.0.0-5.1.0] 0xD) || || 0x8000000000020000 ||
 
+
|-
== CreateSaveDataFileSystemBySystemSaveDataId ==
+
| 0xD || CanOpenSaveDataInfoReaderForInternal || 0x8000000000000040 || [[#OpenSaveDataInfoReaderWithFilter]]
Takes a 0x40-byte [[#SaveDataAttribute]] and a 0x40-byte [[#SaveDataCreationInfo]].
+
|-
 
+
| ([1.0.0-5.1.0] 0xE) || || 0x8000000000000400 ||
Creates savedata in the SYSTEM [[Flash_Filesystem|NAND]] partition.
+
|-
 
+
| 0xE || CanOpenSaveDataMetaFile || 0x8000000000020000 || OpenSaveDataMetaFile
== OpenGameCardStorage ==
+
|-
Takes two input u32s (gamecard handle, partition ID), and returns an [[#IStorage]] for the [[Gamecard_Format|partition]].
+
| ([1.0.0-5.1.0] 0xF) || || 0x8000000000004060 ||
 
+
|-
== OpenGameCardFileSystem ==
+
| 0xF || CanSetCurrentPosixTime || 0x8000000000000400 || SetCurrentPosixTime, SetCurrentPosixTimeWithTimeDifference
Takes two input u32s, with the second u32 located at +4 in rawdata after the first u32. Returns an [[#IFileSystem]].
+
|-
 
+
| ([1.0.0-5.1.0] 0x10) || || 0x8000000000080000 ||
Mounts a [[Gamecard_Partition|gamecard partition]].
+
|-
 
+
| 0x10 || CanReadSaveDataFileSystemExtraData || 0x8000000000004060 || [[#ReadSaveDataFileSystemExtraData]]
== CreateSaveDataFileSystemWithHashSalt ==
+
|-
Takes a total of 0xB0-bytes of input, no output.
+
| 0x11 || CanSetGlobalAccessLogMode || 0x8000000000080000 || [[#SetGlobalAccessLogMode]]
 
+
|-
== OpenSaveDataFileSystem ==
+
| ([1.0.0-5.1.0] 0x12) || CanDebug || 0xC000000000000000 ||
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]]. Official user-process code is only known to use value 1 for the u8.
+
|-
 
+
| 0x12 || CanSetSpeedEmulationMode || 0x8000000000080000 || SetSpeedEmulationMode
Returns an [[#IFileSystem]].
+
|-
 
+
| ([1.0.0-5.1.0] 0x13) || || 0xC000000000800000 ||
Permissions aren't checked until the specified save is successfully found.
+
|-
 
+
| 0x13 || CanDebug || 0xC000000000000000 ||
Only one process (specifically only one [[#IFileSystem]] session) can mount a given savedata at any given time (this includes SystemSaveData).
+
|-
 
+
| ([1.0.0-5.1.0] 0x14) || || 0xC000000001000000 ||
== OpenSaveDataFileSystemBySystemSaveDataId ==
+
|-
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]]. Web-applet only uses value0 for the input u8.
+
| 0x14 || CanFillBis || 0xC000000000800000 || CreatePaddingFile, DeleteAllPaddingFiles
 
+
|-
Returns an [[#IFileSystem]].
+
| ([1.0.0-4.1.0] 0x15) || || 0xC000000002000000 ||
 
+
|-
Mounts savedata in the SYSTEM [[Flash_Filesystem|NAND]] partition.
+
| ([5.0.0-5.1.0] 0x15) || || 0x8000000001000060 ||
 
+
|-
== ReadSaveDataFileSystemExtraDataBySaveDataSpaceId ==
+
| 0x15 || CanCorruptSaveData || 0xC000000001000000 || CorruptSaveDataFileSystem, CorruptSaveDataFileSystemBySaveDataSpaceId
Takes an input u8 [[#SaveDataSpaceId]], an input u64 saveID, and a type-0x6 output buffer containing the [[#SaveDataFileSystemExtraData]].
+
|-
 
+
| ([2.0.0-4.1.0] 0x16) || || 0x8000000004000000 ||
== ReadSaveDataFileSystemExtraData ==
+
|-
Takes an input u64 saveID and a type-0x6 output buffer containing the [[#SaveDataFileSystemExtraData]].
+
| ([5.0.0-5.1.0] 0x16) || || 0x8000000000000060 ||
 
+
|-
== OpenSaveDataInfoReader ==
+
| [2.0.0+] 0x16 || CanCorruptSystemSaveData || 0x8000000001000060 || CorruptSaveDataFileSystem, CorruptSaveDataFileSystemBySaveDataSpaceId
No input, returns an output [[#ISaveDataInfoReader]].
+
|-
 
+
| ([2.0.0-4.1.0] 0x17) || || 0x8000000008000000 ||
== OpenSaveDataInfoReaderBySaveDataSpaceId ==
+
|-
Takes an input u8 [[#SaveDataSpaceId]], returns an output [[#ISaveDataInfoReader]].
+
| ([5.0.0-5.1.0] 0x17) || || 0xC000000002000000 ||
 
+
|-
== FindSaveDataWithFilter ==
+
| [2.0.0+] 0x17 || CanVerifySaveData || 0x8000000000000060 || [[#VerifySaveDataFileSystem]], VerifySaveDataFileSystemBySaveDataSpaceId
Takes a total of 0x50-bytes of input, returns 8-bytes of output and a type-0x6 output buffer.
+
|-
 
+
| ([2.0.0-4.1.0] 0x18) || || 0x8000000010000000 ||
== OpenSaveDataInfoReaderWithFilter ==
+
|-
Takes a total of 0x50-bytes of input, returns an [[#ISaveDataInfoReader]].
+
| ([5.0.0-5.1.0] 0x18) || || 0x8000000004000000 ||
 
+
|-
== OpenSaveDataTransferManager ==
+
| [2.0.0+] 0x18 || CanDebugSaveData || 0xC000000002000000 || [[#CreateSaveDataFileSystem]], [[#OpenSaveDataFileSystem]], [[#SetSaveDataRootPath]]
No input, returns an [[#ISaveDataTransferManager]].
+
|-
 
+
| ([2.0.0-4.1.0] 0x19) || || 0x8000000000000800 ||
== OpenSaveDataTransferManagerVersion2 ==
+
|-
No input, returns an [[#ISaveDataTransferManagerWithDivision]].
+
| ([5.0.0-5.1.0] 0x19) || || 0x8000000008000000 ||
 
+
|-
== OpenSaveDataTransferProhibiter ==
+
| [2.0.0+] 0x19 || CanFormatSdCard || 0x8000000004000000 || FormatSdCardFileSystem
Takes an input u64, returns an [[#ISaveDataTransferProhibiter]].
+
|-
 
+
| ([2.0.0-4.1.0] 0x1A) || || 0x8000000000004020 ||
== ListAccessibleSaveDataOwnerId ==
+
|-
Takes a total of 0x10-bytes of input, returns 4-bytes of output and a type-0x6 output buffer.
+
| ([5.0.0-5.1.0] 0x1A) || || 0x8000000010000000 ||
 
+
|-
== OpenSaveDataTransferManagerForSaveDataRepair ==
+
| [2.0.0+] 0x1A || CanGetRightsId || 0x8000000008000000 || GetRightsId, GetRightsIdAndKeyGenerationByPath, GetRightsIdByPath
No input, returns an output [[#ISaveDataTransferManagerForSaveDataRepair]].
+
|-
 
+
| ([3.0.0-4.1.0] 0x1B) || || 0x8000000000002020 ||
== OpenContentStorageFileSystem ==
+
|-
Takes a [[#ContentStorageId]]. Invalid values return 0x2EE202.
+
| ([5.0.0-5.1.0] 0x1B) || || 0x8000000000000800 ||
 
+
|-
Returns an [[#IFileSystem]] with NCA files. The read data from these files is identical to the data read by [[NCM_services#ReadContentIdFile]].
+
| [3.0.0+] 0x1B || CanRegisterExternalKey || 0x8000000010000000 || RegisterExternalKey, UnregisterAllExternalKey
 
+
|-
== OpenCloudBackupWorkStorageFileSystem ==
+
| ([3.0.0-4.1.0] 0x1C) || || 0x8000000000000028 ||
Takes 4-bytes of input, returns an [[#IFileSystem]].
+
|-
 
+
| ([5.0.0-5.1.0] 0x1C) || || 0x8000000000004020 ||
== OpenCustomStorageFileSystem ==
+
|-
Takes a [[#CustomStorageId]]. Invalid values return 0x2EE202.
+
| [3.0.0+] 0x1C || CanSetEncryptionSeed || 0x8000000000000800 || [[#SetSdCardEncryptionSeed]]
 
+
|-
Returns an [[#IFileSystem]] from either User:/CustomStorage0 or Sdcard:/Nintendo/CustomStorage0. If on the SD card, an AesXtsFileSystem is created using a key source specifically for custom storage.
+
| ([4.0.0-4.1.0] 0x1D) || || 0x8000000020000000 ||
 
+
|-
== OpenDataStorageByDataId ==
+
| ([5.0.0-5.1.0] 0x1D) || || 0x8000000000000000 ||
Takes a [[NCM_services#StorageId|StorageID]] and a [[NCM_services#DataId|DataId]].
+
|-
 
+
| [4.0.0+] 0x1D || CanWriteSaveDataFileSystemExtraDataTimeStamp || 0x8000000000000020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
Returns a [[IPC_Marshalling#Domain_message|domain object ID]] implementing the [[#IStorage]] interface for data archives.
+
|-
 
+
| ([4.0.0-4.1.0] 0x1E) || || 0x8000000040000000 ||
== OpenDataFileSystemWithProgramIndex ==
+
|-
Takes an input u8, returns an [[#IFileSystem]].
+
| ([5.0.0-5.1.0] 0x1E) || || 0x8000000000002020 ||
 
+
|-
== OpenDataStorageWithProgramIndex ==
+
| [4.0.0+] 0x1E || CanWriteSaveDataFileSystemExtraDataFlags || 0x8000000000004020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
Takes an input u8, returns an [[#IStorage]].
+
|-
 
+
| ([4.0.0-4.1.0] 0x1F) || || 0x8000000000000000 ||
== OpenDeviceOperator ==
+
|-
This command returns a session to a port implementing the [[#IDeviceOperator]] interface.
+
| ([5.0.0-5.1.0] 0x1F) || || 0x8000000000000028 ||
 
+
|-
== OpenSdCardDetectionEventNotifier ==
+
| [4.0.0+] 0x1F || CanWriteSaveDataFileSystemExtraDataCommitId || 0x8000000000000020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
This command returns a session to a port implementing the [[#IEventNotifier]] interface.
+
|-
 
+
| ([4.0.0-4.1.0] 0x20) || || 0x8000000000000000 ||
== OpenGameCardDetectionEventNotifier ==
+
|-
This command returns a session to a port implementing the [[#IEventNotifier]] interface.
+
| ([5.0.0-5.1.0] 0x20) || || 0x8000000020000000 ||
 
+
|-
== SimulateDeviceDetectionEvent ==
+
| [4.0.0+] 0x20 || CanWriteSaveDataFileSystemExtraDataAll || 0x8000000000000000 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
Takes a total of 0xC-bytes of input, no output.
+
|-
 
+
| ([5.0.0-5.1.0] 0x21) || || 0x8000000040000000 ||
== VerifySaveDataFileSystem ==
+
|-
Takes an unknown input u64 and a type-0x6 output buffer.
+
| [5.0.0+] 0x21 || CanExtendSaveData || 0x8000000000002020 || ExtendSaveDataFileSystem
 
+
|-
The input u64 high-byte must be non-zero, otherwise an [[Error_codes|error]] is returned(0xE02).
+
| ([5.0.0-5.1.0] 0x22) || || 0x0000000080000002 ||
 
+
|-
== GetSaveDataCommitId ==
+
| [5.0.0+] 0x22 || CanExtendSystemSaveData || 0x8000000000000028 || ExtendSaveDataFileSystem
Takes an input u8 and u64, returns an output u64.
+
|-
 
+
| ([5.0.0-5.1.0] 0x23) || || 0x8000000000000000 ||
== SetSdCardEncryptionSeed ==
+
|-
Takes in the 0x10 byte SD card encryption seed, and loads it into FS-module state.
+
| ([6.0.0-9.2.0] 0x23) || || 0x8000000020000000 ||
 
+
|-
[[NS_Services|NS]]-module reads the 0x10 bytes from SdCard:/Nintendo/Contents/private, and compares them to the first 0x10 bytes of the ns_appman:/private (in [[Flash_Filesystem#System_Savegames|system savedata]] 0x8000000000000043). If they match, NS calls this command using bytes 0x10-0x20 from ns_appman:/private. The rest of this file (0x1F0 bytes total) is (usually/always?) all-zero (however in some cases the byte at offset 0x20 is value 0x1).
+
| [5.0.0+] 0x23 || CanExtendOthersSystemSaveData || 0x8000000000000020 || ExtendSaveDataFileSystem
 
+
|-
== OpenAccessFailureDetectionEventNotifier ==
+
| ([5.0.0-5.1.0] 0x24) || || 0x8000000000000000 ||
Takes 8-bytes of input and returns an [[#IEventNotifier]].
+
|-
 
+
| ([6.0.0-9.2.0] 0x24) || || 0x8000000040000000 ||
[8.0.0+] Now takes an additional 8-bytes of input.
+
|-
 
+
| [5.0.0+] 0x24 || CanRegisterUpdatePartition || 0x8000000020000000 || RegisterUpdatePartition
== SetSaveDataSize ==
+
|-
Takes two input u64s "size" and "journal_size", and writes them to fsp-srv object member variables.
+
| ([5.0.0-5.1.0] 0x25) || || 0x8000000080200000 ||
 
+
|-
These variables are normally initialized with 32 MiB (0x2000000) and 16 MiB (0x1000000), respectively.
+
| ([6.0.0-9.2.0] 0x25) || || 0x8000000200000000 ||
 
+
|-
These variables don't seem to be actually used anywhere else (?)
+
| [5.0.0+] 0x25 || CanOpenSaveDataTransferManager || 0x8000000040000000 || [[#OpenSaveDataTransferManager]]
 +
|-
 +
| ([5.0.0-5.1.0] 0x26) || || 0x8000000080000110 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x26) || || 0x8000000200002000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x26) || || 0x8000000200000000 ||
 +
|-
 +
| [5.0.0+] 0x26 || CanOpenSaveDataTransferManagerVersion2 || 0x8000000200000000 || [[#OpenSaveDataTransferManagerVersion2]]
 +
|-
 +
| ([5.0.0-5.1.0] 0x27) || || 0x8000000000100008 ||
 +
|-
 +
| ([6.0.0-7.0.1] 0x27) || || 0x8000000200002000 ||
 +
|-
 +
| ([8.0.0-8.1.0] 0x27) || || 0x8000000240002000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x27) || || 0x8000000000000000 ||
 +
|-
 +
| [5.0.0+] 0x27 || CanOpenSaveDataTransferManagerForSaveDataRepair || 0x8000000200000000 || OpenSaveDataTransferManagerForSaveDataRepair
 +
|-
 +
| ([5.0.0-5.1.0] 0x28) || || 0x8000000080010000 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x28) || || 0x8000000000000000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x28) || || 0x8000000200002000 ||
 +
|-
 +
| [5.0.0+] 0x28 || CanOpenSaveDataTransferManagerForSaveDataRepairTool || 0x8000000000000000 || OpenSaveDataTransferManagerForSaveDataRepair
 +
|-
 +
| ([5.0.0-5.1.0] 0x29) || || 0x0000000080000001 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x29) || || 0x8000000000000000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x29) || || 0x8000000240002000 ||
 +
|-
 +
| [5.0.0+] 0x29 || CanOpenOpenSaveDataTransferProhibiter || 0x8000000200002000 || [[#OpenSaveDataTransferProhibiter]]
 +
|-
 +
| ([5.0.0-5.1.0] 0x2A) || || 0x0000000080000001 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x2A) || || 0x8000000080200000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x2A) || || 0x8000000000000000 ||
 +
|-
 +
| [5.0.0+] 0x2A || CanOpenSaveDataMover || 0x8000001000000000 || [[#OpenSaveDataMover]]
 +
|-
 +
| ([5.0.0-5.1.0] 0x2B) || || 0x0000000080000001 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x2B) || || 0x8000000080000110 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x2B) || || 0x8000000000000000 ||
 +
|-
 +
| [5.0.0+] 0x2B || CanOpenBisWiper || 0x8000000000000800 || [[#OpenBisWiper]]
 +
|-
 +
| ([5.0.0-5.1.0] 0x2C) || || 0x0000000080000001 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x2C) || || 0x8000000000100008 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x2C) || || 0x8000000080200000 ||
 +
|-
 +
| [5.0.0+] 0x2C || CanListAccessibleSaveDataOwnerId || 0x8000000240002000 || [[#ListAccessibleSaveDataOwnerId]]
 +
|-
 +
| ([5.0.0-5.1.0] 0x2D) || || 0x0000000080000001 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x2D) || || 0x8000000000010000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x2D) || || 0x8000000080000110 ||
 +
|-
 +
| [5.0.0+] 0x2D || CanControlMmcPatrol || 0x8000000000000000 || SuspendMmcPatrol, ResumeMmcPatrol
 +
|-
 +
| ([5.0.0-5.1.0] 0x2E) || || 0x8000000040000000 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x2E) || || 0x8000000100000000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x2E) || || 0x8000000000100008 ||
 +
|-
 +
| [5.0.0+] 0x2E || CanOverrideSaveDataTransferTokenSignVerificationKey || 0x8000000000000000 || OverrideSaveDataTransferTokenSignVerificationKey
 +
|-
 +
| ([5.0.0-5.1.0] 0x2F) || || 0x8000000080200000 ||
 +
|-
 +
| ([6.0.0-8.1.0] 0x2F) || || 0x8000000100000000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x2F) || || 0x8000000000010000 ||
 +
|-
 +
| [5.0.0+] 0x2F || CanOpenSdCardDetectionEventNotifier || 0x8000000080200000 || [[#OpenSdCardDetectionEventNotifier]]
 +
|-
 +
| ([5.1.0-6.0.0] 0x30) || || 0x8000000080080000 ||
 +
|-
 +
| ([6.0.1-9.2.0] 0x30) || || 0x8000000100000000 ||
 +
|-
 +
| [5.1.0+] 0x30 || CanOpenGameCardDetectionEventNotifier || 0x8000000080000110 || [[#OpenGameCardDetectionEventNotifier]]
 +
|-
 +
| ([6.0.0-9.2.0] 0x31) || || 0x8000000100000000 ||
 +
|-
 +
| [6.0.0+] 0x31 || CanOpenSystemDataUpdateEventNotifier || 0x8000000000100008 || OpenSystemDataUpdateEventNotifier
 +
|-
 +
| ([6.0.0-9.2.0] 0x32) || || 0x8000000100000000 ||
 +
|-
 +
| [6.0.0+] 0x32 || CanNotifySystemDataUpdateEvent || 0x8000000000010000 || NotifySystemDataUpdateEvent
 +
|-
 +
| ([6.0.0-8.1.0] 0x33) || || 0x8000000040000000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x33) || || 0x8000000100000000 ||
 +
|-
 +
| [6.0.0+] 0x33 || CanOpenAccessFailureDetectionEventNotifier || 0x8000000100000000 || [[#OpenAccessFailureDetectionEventNotifier]]
 +
|-
 +
| ([6.0.0-8.1.0] 0x34) || || 0x8000000200000020 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x34) || || 0x8000000100000000 ||
 +
|-
 +
| [6.0.0+] 0x34 || CanGetAccessFailureDetectionEvent || 0x8000000100000000 || GetAccessFailureDetectionEvent
 +
|-
 +
| ([6.0.0-8.1.0] 0x35) || || 0x8000000000200000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x35) || || 0x8000000040000000 ||
 +
|-
 +
| [6.0.0+] 0x35 || CanIsAccessFailureDetected || 0x8000000100000000 || IsAccessFailureDetected
 +
|-
 +
| ([6.0.0-8.1.0] 0x36) || || 0x4000000000000000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x36) || || 0x8000000200000020 ||
 +
|-
 +
| [6.0.0+] 0x36 || CanResolveAccessFailure || 0x8000000100000000 || ResolveAccessFailure
 +
|-
 +
| ([6.0.0-6.2.0] 0x37) || || 0x8000000000080000 ||
 +
|-
 +
| ([7.0.0-8.1.0] 0x37) || || 0x8000000000000000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x37) || || 0x8000000000200000 ||
 +
|-
 +
| [6.0.0+] 0x37 || CanAbandonAccessFailure || 0x8000000100000000 || AbandonAccessFailure
 +
|-
 +
| ([6.0.0-6.2.0] 0x38) || || 0x8000000000000000 ||
 +
|-
 +
| ([7.0.0-8.1.0] 0x38) || || 0x8000000400000000 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x38) || || 0x4000000000000000 ||
 +
|-
 +
| [6.0.0+] 0x38 || CanQuerySaveDataInternalStorageTotalSize || 0x8000000040000000 || QuerySaveDataInternalStorageTotalSize
 +
|-
 +
| ([8.0.0-8.1.0] 0x39) || || 0x8000000000000010 ||
 +
|-
 +
| ([9.0.0-9.2.0] 0x39) || || 0x8000000000000000 ||
 +
|-
 +
| [8.0.0+] 0x39 || CanGetSaveDataCommitId || 0x8000000200000020 || [[#GetSaveDataCommitId]]
 +
|-
 +
| ([9.0.0-9.2.0] 0x3A) || || 0x8000000400000000 ||
 +
|-
 +
| [9.0.0+] 0x3A || CanSetSdCardAccessibility || 0x8000000000200000 || SetSdCardAccessibility
 +
|-
 +
| ([9.0.0-9.2.0] 0x3B) || || 0x8000000000000010 ||
 +
|-
 +
| [9.0.0+] 0x3B || CanSimulateDevice || 0x4000000000000000 || SimulateDeviceDetectionEvent, SetSimulationEvent, ClearSimulationEvent
 +
|-
 +
| ([9.0.0-9.2.0] 0x3C) || || 0x8000000800000000 ||
 +
|-
 +
| [9.0.0+] 0x3C || CanCreateSaveDataWithHashSalt || 0x8000000000000000 || [[#CreateSaveDataFileSystem]], [[#CreateSaveDataFileSystemWithHashSalt]]
 +
|-
 +
| ([9.0.0-9.2.0] 0x3D) || || 0x8000000800000000 ||
 +
|-
 +
| [9.0.0+] 0x3D || CanRegisterProgramIndexMapInfo || 0x8000000400000000 || RegisterProgramIndexMapInfo
 +
|-
 +
| ([9.0.0-9.2.0] 0x3E) || || 0x8000000800000000 ||
 +
|-
 +
| [9.0.0+] 0x3E || CanChallengeCardExistence || 0x8000000000000010 || ChallengeCardExistence
 +
|-
 +
| ([9.0.0-9.2.0] 0x3F) || || 0x8000000800000000 ||
 +
|-
 +
| [9.0.0+] 0x3F || CanCreateOwnSaveData || 0x8000000800000000 || [[#CreateSaveDataFileSystem]], CreateSaveDataFileSystemWithHashSalt
 +
|-
 +
| ([9.0.0-9.2.0] 0x40) || || 0x8000000800000000 ||
 +
|-
 +
| ([10.0.0-10.1.1] 0x40) || || 0x8000000800000000 ||
 +
|-
 +
| [9.0.0+] 0x40 || CanDeleteOwnSaveData || 0x8000000800000000 || [[#DeleteSaveDataFileSystem]]
 +
|-
 +
| ([9.0.0-10.1.1] 0x41) || || 0x8000000800000000 ||
 +
|-
 +
| [9.0.0+] 0x41 || CanReadOwnSaveDataFileSystemExtraData || 0x8000000800000000 || [[#ReadSaveDataFileSystemExtraData]]
 +
|-
 +
| ([10.0.0-10.1.1] 0x42) || || 0x8000000800000000 ||
 +
|-
 +
| [10.0.0+] 0x42 || CanExtendOwnSaveData || 0x8000000800000000 || ExtendSaveDataFileSystem
 +
|-
 +
| ([10.0.0-10.1.1] 0x43) || || 0x8000000800000000 ||
 +
|-
 +
| [10.0.0+] 0x43 || CanOpenOwnSaveDataTransferProhibiter || 0x8000000800000000 || [[#OpenSaveDataTransferProhibiter]]
 +
|-
 +
| [10.2.0+] 0x44 || CanFindOwnSaveDataWithFilter || 0x8000000800000000 || [[#FindSaveDataWithFilter]]
 +
|-
 +
| [11.0.0+] 0x45 || CanOpenSaveDataTransferManagerForRepair || 0x8000000000000020 || [[#OpenSaveDataTransferManagerForRepair]]
 +
|-
 +
| [13.0.0+] 0x46 || CanSetDebugConfiguration || 0x8000000000000000 || SetDebugOption, UnsetDebugOption
 +
|-
 +
| [13.0.0+] 0x47 || CanOpenDataStorageByPath || 0x8000000000000000 || OpenDataStorageByPath
 +
|-
 +
| [15.0.0+] 0x48 || CanNotifyErrorContextServiceReady || 0x8000004000000000 || NotifyErrorContextServiceReady
 +
|}
   −
== SetSaveDataRootPath ==
+
== OpenFileSystem ==
Takes an input path, and does snprintf(<fsp-srv object>->m_save_data_root_path, FS_MAX_PATH-1, "/%s", input_path);
+
Takes a type-0x19 input [[#ContentPath]] and a [[#FileSystemProxyType]] as parameters. Returns an [[#IFileSystem]].
   −
This path is normally all-zero. When this path is non-zero, the internal OpenSaveDataFileSystem function will create a DirectorySaveDataFileSystem if the target save is a user-save + a directory exists, instead of the normal savedata filesystem object.
+
[2.0.0+] This function was removed.
   −
== SetGlobalAccessLogMode ==
+
== SetCurrentProcess ==
Takes an input u32.
+
Takes a pid-descriptor.
   −
== SetGlobalAccessLogMode ==
+
== OpenFileSystemWithPatch ==
Takes an input u32.
+
Takes an input [[#FileSystemProxyType]] and an u64 title-id. Returns an [[#IFileSystem]].
   −
== GetGlobalAccessLogMode ==
+
Web-applet loads the [[#FileSystemProxyType]] (which must be '''Manual''') from u32_table[inparam].
Returns an output u32.
     −
GlobalAccessLogMode is normally 0.
+
Note: web-applet strings refer to both this cmd and [[#OpenFileSystemWithId]] as "MountContent", but official nn_sf_sync symbols use "OpenXX" names.
   −
== OutputAccessLogToSdCard ==
+
== OpenFileSystemWithId ==
Takes a type-0x5 input buffer.
+
Takes a type-0x19 input buffer, an [[#FileSystemProxyType]] and an u64 title-id. Returns an [[#IFileSystem]].
   −
The input buffer is the string to output to the log. User-processes normally include a newline at the end.
+
The [[#IFileSystem]] must be '''Meta''' if the NCA type is 0.
   −
User-processes only use this when the value previously loaded from [[#GetGlobalAccessLogMode]] has bit1 set.
+
The input buffer is the output string path from [[NS_Services#GetApplicationContentPath|GetApplicationContentPath]].
   −
When bit1 in GlobalAccessLogMode is clear, FS-module will just return 0 for OutputAccessLogToSdCard. However even with that set the log doesn't show up SD, unknown why.
+
May return errors when attempting to access NCA-paths for an update-title with a gamecard, when the gamecard isn't inserted. May return error 0x7D402 in some cases with update-titles. Non-val2 in32 values with NCA-type1 are unusable, even for normal titles.
   −
The input buffer is written to the "$FsAccessLog:/FsAccessLog.txt" file, where "$FsAccessLog" is the SD-card mount-name. It's written to the current end of the file(appended).
+
The official "MountApplicationPackage" func uses this with in64=0 and [[#FileSystemProxyType]] '''Package'''.
   −
== GetProgramIndexForAccessLog ==
+
After the [[#FileSystemProxyType]] specific permissions are checked, it then gets the func retval for permissions-type 0x25 and func0.
No input, returns two 32-bit values "version" and "program_index".
     −
== OpenMultiCommitManager ==
+
When [[#FileSystemProxyType]] is '''Meta''', it uses in64=0xffffffffffffffff internally, otherwise it checks if in64 is set to 0xffffffffffffffff then throws an error if so. When the in64 used internally is not 0xffffffffffffffff, it's compared with the NCA [[NCM_services#ProgramId|ProgramId]], then an error is thrown on mismatch.
No input, returns an output [[#IMultiCommitManager]].
     −
= IStorage =
+
== OpenBisFileSystem ==
This is "nn::fssrv::sf::IStorage".
+
Takes a type-0x19 input buffer string and a [[#BisPartitionId]]. Official user-process code sets instr[0] = 0 normally. Returns an [[#IFileSystem]].
   −
This is the interface for a raw device, usually a block device.
+
Only partitionIDs for FAT partitions are usable with this, otherwise error 0x2EE202 is returned. Seems to be about the same as [[#OpenBisStorage]] except this mounts the partition filesystem instead of allowing direct access to the partition sectors.
   −
{| class="wikitable" border="1"
+
== OpenBisStorage ==
|-
+
Takes a u32 partition ID, returns 0x2EE202 for partitions which do not exist, 0x320002 for partitions which cannot be opened and a valid [[#IStorage]] handle otherwise.
! Cmd || Name
  −
|-
  −
| 0 || [[#Read]]
  −
|-
  −
| 1 || [[#Write]]
  −
|-
  −
| 2 || [[#Flush]]
  −
|-
  −
| 3 || [[#SetSize]]
  −
|-
  −
| 4 || [[#GetSize]]
  −
|-
  −
| 5 || [4.0.0+] OperateRange
  −
|}
     −
== Read ==
+
== InvalidateBisCache ==
Takes a type-0x46 buffer, an offset and length.
+
Seems to invalidate the Bis cache for MBR/GPT after overwriting that data via the OpenBisStorage IStorage. Used by [[SystemInitializer]].
   −
== Write ==
+
== DeleteSaveDataFileSystem ==
Takes a type-0x45 buffer, an offset and length.
+
Takes an input u64.
   −
== Flush ==
+
== CreateSaveDataFileSystem ==
No input.
+
Takes a 0x40-byte [[#SaveDataAttribute]], a 0x40-byte [[#SaveDataCreationInfo]], and a 0x10-byte input struct which governs creation of a saveMeta file.
   −
== SetSize ==
+
Only the first 0x5-bytes in the 0x10-byte struct are initialized: all-zero when automatically creating savedata during savecommon mount by official user-processes. In the dedicated save-creation code in official user-processes: +0 u32 = 0x40060 meta file size, +4 u8 = 1 meta index which dictates meta file name.
Takes a size.
     −
== GetSize ==
+
Creates non-system savedata.
Returns a size.
     −
= IFileSystem =
+
== CreateSaveDataFileSystemBySystemSaveDataId ==
This is "nn::fssrv::sf::IFileSystem".
+
Takes a 0x40-byte [[#SaveDataAttribute]] and a 0x40-byte [[#SaveDataCreationInfo]].
   −
There are two main implementations of this interface:
+
Creates savedata in the SYSTEM [[Flash_Filesystem|NAND]] partition.
   −
* '''nn::fs::fsa::IFileSystem''': The main IFileSystem implementation. Filesystem classes implement this interface, and FS code usually operates on this interface.
+
== OpenGameCardStorage ==
* '''nn::fssrv::sf::IFileSystem''': Used for sending an IFileSystem over IPC. Not used outside of IPC code.
+
Takes two input u32s (gamecard handle, partition ID), and returns an [[#IStorage]] for the [[Gamecard_Format|partition]].
   −
There are two adapter classes to convert between these interfaces:
+
== OpenGameCardFileSystem ==
 +
Takes two input u32s, with the second u32 located at +4 in rawdata after the first u32. Returns an [[#IFileSystem]].
   −
* '''nn::fssrv::detail::FileSystemInterfaceAdapter''': Allows access to an nn::fs::fsa::IFileSystem via the nn::fssrv::sf::IFileSystem interface.
+
Mounts a [[Gamecard_Partition|gamecard partition]].
* '''nn::fs::detail::FileSystemServiceObjectAdapter''': Allows access to an nn::fssrv::sf::IFileSystem via the nn::fs::fsa::IFileSystem interface.
     −
When the FS process returns a filesystem, it will wrap the filesystem object in a FileSystemInterfaceAdapter to return it over IPC.
+
== CreateSaveDataFileSystemWithHashSalt ==
Then when FS application code receives that filesystem, it will wrap the nn::fssrv::sf::IFileSystem object in a FileSystemServiceObjectAdapter before using it.
+
Takes a total of 0xB0-bytes of input, no output.
   −
{| class="wikitable" border="1"
+
== OpenSaveDataFileSystem ==
|-
+
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]]. Official user-process code is only known to use value 1 for the u8.
! Cmd || Name
+
 
|-
+
Returns an [[#IFileSystem]].
| 0 || CreateFile
+
 
|-
+
Permissions aren't checked until the specified save is successfully found.
| 1 || DeleteFile
+
 
|-
+
Only one process (specifically only one [[#IFileSystem]] session) can mount a given savedata at any given time (this includes SystemSaveData).
| 2 || CreateDirectory
+
 
|-
+
== OpenSaveDataFileSystemBySystemSaveDataId ==
| 3 || DeleteDirectory
+
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]]. Web-applet only uses value0 for the input u8.
|-
+
 
| 4 || DeleteDirectoryRecursively
+
Returns an [[#IFileSystem]].
|-
+
 
| 5 || RenameFile
+
Mounts savedata in the SYSTEM [[Flash_Filesystem|NAND]] partition.
|-
+
 
| 6 || RenameDirectory
+
== OpenReadOnlySaveDataFileSystem ==
|-
+
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]], and returns an [[#IFileSystem]].
| 7 || [[#GetEntryType]]
  −
|-
  −
| 8 || [[#OpenFile]]
  −
|-
  −
| 9 || [[#OpenDirectory]]
  −
|-
  −
| 10 || [[#Commit]]
  −
|-
  −
| 11 || [[#GetFreeSpaceSize]]
  −
|-
  −
| 12 || [[#GetTotalSpaceSize]]
  −
|-
  −
| 13 || [3.0.0+] [[#CleanDirectoryRecursively]]
  −
|-
  −
| 14 || [3.0.0+] [[#GetFileTimeStampRaw]]
  −
|-
  −
| 15 || [4.0.0+] QueryEntry
  −
|}
     −
== GetEntryType ==
+
Mounts SaveData as ReadOnly.
Takes a type-0x9 input buffer for the path and returns [[#DirectoryEntryType]] as an output u32.
     −
== OpenFile ==
+
== ReadSaveDataFileSystemExtraDataBySaveDataSpaceId ==
Takes a type-0x19 input buffer for the path, and an u32 '''mode'''. '''mode''' controls how the file is opened, based on which bits are set:
+
Takes an input u8 [[#SaveDataSpaceId]], an input u64 saveID, and a type-0x6 output buffer containing the [[#SaveDataFileSystemExtraData]].
   −
* When bit 0 is set, the file is Readable: you can use the Read operation.
+
== ReadSaveDataFileSystemExtraData ==
* When bit 1 is set, the file is Writable: you can use the Write operation.
+
Takes an input u64 saveID and a type-0x6 output buffer containing the [[#SaveDataFileSystemExtraData]].
* When bit 2 is set, the file is Appendable: unless this bit is set, you will not be able to write beyond the end of a file (such writes will result in an error 0x307202)
     −
== OpenDirectory ==
+
== OpenSaveDataInfoReader ==
Takes a type-0x9 input buffer for the path and an u64 '''filter_flags'''. '''filter_flags''' controls what type of entries are read by the [[#IDirectory]]: bitmask 0x1 = directories, bitmask 0x2 = files.
+
No input, returns an output [[#ISaveDataInfoReader]].
   −
== Commit ==
+
== OpenSaveDataInfoReaderBySaveDataSpaceId ==
Like [https://3dbrew.org/wiki/FS:ControlArchive 3DS], this has to be used after writing to savedata for the changes to take affect.
+
Takes an input u8 [[#SaveDataSpaceId]], returns an output [[#ISaveDataInfoReader]].
   −
== GetFreeSpaceSize ==
+
== FindSaveDataWithFilter ==
Takes a type-0x9 input buffer for the path and returns an output byte-size u64 for the total free space with this FS.
+
Takes a total of 0x50-bytes of input, returns 8-bytes of output and a type-0x6 output buffer.
   −
== GetTotalSpaceSize ==
+
== OpenSaveDataInfoReaderWithFilter ==
Takes a type-0x9 input buffer for the path and returns an output byte-size u64 for the total space available with this FS(free+used).
+
Takes a total of 0x50-bytes of input, returns an [[#ISaveDataInfoReader]].
   −
== CleanDirectoryRecursively ==
+
== OpenSaveDataTransferManager ==
Takes a type-0x9 input buffer for the path and clears the contents of the directory specified in the path.
+
No input, returns an [[#ISaveDataTransferManager]].
   −
== GetFileTimeStampRaw ==
+
== OpenSaveDataTransferManagerVersion2 ==
Takes a type-0x19 input buffer for the path and returns a 0x20-byte struct. This contains 3 u64s and an u8.
+
No input, returns an [[#ISaveDataTransferManagerWithDivision]].
   −
= IDirectory =
+
== OpenSaveDataTransferProhibiter ==
This is "nn::fssrv::sf::IDirectory".
+
Takes an input u64, returns an [[#ISaveDataTransferProhibiter]].
   −
{| class="wikitable" border="1"
+
== ListAccessibleSaveDataOwnerId ==
|-
+
Takes a total of 0x10-bytes of input, returns 4-bytes of output and a type-0x6 output buffer.
! Cmd || Name
+
 
|-
+
== OpenSaveDataTransferManagerForSaveDataRepair ==
| 0 || [[#Read]]
+
No input, returns an output [[#ISaveDataTransferManagerForSaveDataRepair]].
|-
+
 
| 1 || [[#GetEntryCount]]
+
== OpenSaveDataMover ==
|}
+
Takes 2 input [[#SaveDataSpaceId]], an input u64 size and a TransferMemory handle. Returns an output [[#ISaveDataMover]].
   −
== Read ==
+
== OpenSaveDataTransferManagerForRepair ==
Takes a type-0x6 output buffer. Returns an output u64(?) for the total number of read entries, this is 0 when no more entries are available.
+
No input, returns an output [[#ISaveDataTransferManagerForRepair]].
   −
The output buffer contains the read array of [[#DirectoryEntry]]. This doesn't include entries for "." and "..".
+
== OpenContentStorageFileSystem ==
 +
Takes a [[#ContentStorageId]]. Invalid values return 0x2EE202.
   −
== GetEntryCount ==
+
Returns an [[#IFileSystem]] with NCA files. The read data from these files is identical to the data read by [[NCM_services#ReadContentIdFile]].
Returns an u64 for the total number of readable entries.
     −
= DirectoryEntry =
+
== OpenCloudBackupWorkStorageFileSystem ==
This is "nn::fs::DirectoryEntry".
+
Takes 4-bytes of input, returns an [[#IFileSystem]].
   −
{| class="wikitable" border="1"
+
== OpenCustomStorageFileSystem ==
|-
+
Takes a [[#CustomStorageId]]. Invalid values return 0x2EE202.
! Offset || Size || Description
  −
|-
  −
| 0x0 || 0x301 || Path
  −
|-
  −
| 0x301 || 0x1 || File attributes (bit 0 = is directory; bit 1 = archive bit)
  −
|-
  −
| 0x302 || 0x2 || Padding?
  −
|-
  −
| 0x304 || 0x1 || [[#DirectoryEntryType]]
  −
|-
  −
| 0x305 || 0x3 || Padding?
  −
|-
  −
| 0x308 || 0x8 || Filesize, 0 for directories.
  −
|}
     −
= DirectoryEntryType =
+
Returns an [[#IFileSystem]] from either User:/CustomStorage0 or Sdcard:/Nintendo/CustomStorage0. If on the SD card, an AesXtsFileSystem is created using a key source specifically for custom storage.
This is "nn::fs::DirectoryEntryType".
     −
An s8 value indicating a directory entry type. The current values are:
+
== OpenDataStorageByDataId ==
 +
Takes a [[NCM_services#StorageId|StorageID]] and a [[NCM_services#DataId|DataId]].
   −
{| class="wikitable" border="1"
+
Returns a [[IPC_Marshalling#Domain_message|domain object ID]] implementing the [[#IStorage]] interface for data archives.
|-
  −
! Value || Description
  −
|-
  −
| 0 || Directory
  −
|-
  −
| 1 || File
  −
|}
     −
= IFile =
+
== OpenDataFileSystemWithProgramIndex ==
This is "nn::fssrv::sf::IFile".
+
Takes an input u8, returns an [[#IFileSystem]].
 +
 
 +
== OpenDataStorageWithProgramIndex ==
 +
Takes an input u8, returns an [[#IStorage]].
   −
{| class="wikitable" border="1"
+
== OpenDeviceOperator ==
|-
+
This command returns a session to a port implementing the [[#IDeviceOperator]] interface.
! Cmd || Name
  −
|-
  −
| 0 || Read
  −
|-
  −
| 1 || Write
  −
|-
  −
| 2 || Flush
  −
|-
  −
| 3 || SetSize
  −
|-
  −
| 4 || GetSize
  −
|-
  −
| 5 || [4.0.0+] OperateRange
  −
|}
     −
= ISaveDataInfoReader =
+
== OpenSdCardDetectionEventNotifier ==
This is "nn::fssrv::sf::ISaveDataInfoReader".
+
This command returns a session to a port implementing the [[#IEventNotifier]] interface.
   −
{| class="wikitable" border="1"
+
== OpenGameCardDetectionEventNotifier ==
|-
+
This command returns a session to a port implementing the [[#IEventNotifier]] interface.
! Cmd || Name
+
 
|-
+
== SimulateDeviceDetectionEvent ==
| 0 || [[#ReadSaveDataInfo]]
+
Takes a total of 0xC-bytes of input, no output.
|}
+
 
 +
== VerifySaveDataFileSystem ==
 +
Takes an unknown input u64 and a type-0x6 output buffer.
 +
 
 +
The input u64 high-byte must be non-zero, otherwise an [[Error_codes|error]] is returned(0xE02).
   −
== ReadSaveDataInfo ==
+
== GetSaveDataCommitId ==
Takes a type-0x6 output buffer. Returns an output u64 for total output entries. This buffer contains an array of [[#SaveDataInfo]].
+
Takes an input u8 and u64, returns an output u64.
   −
This is used to get [[#SaveDataInfo]] for all savedata on the system (or all savedata for the current [[#SaveDataSpaceId]]). When used multiple times, it will resume reading where it left off, until no more entries are available (in that case the out u64 is value 0).
+
== SetSdCardEncryptionSeed ==
 +
Takes in the 0x10 byte SD card encryption seed, and loads it into FS-module state.
   −
= IDeviceOperator =
+
[[NS_Services|NS]]-module reads the 0x10 bytes from SdCard:/Nintendo/Contents/private, and compares them to the first 0x10 bytes of the ns_appman:/private (in [[Flash_Filesystem#System_Savegames|system savedata]] 0x8000000000000043). If they match, NS calls this command using bytes 0x10-0x20 from ns_appman:/private. The rest of this file (0x1F0 bytes total) is all-zero except for the byte at offset 0x20. This byte is set to 1 by NS if the SD card has been mounted successfully and is subsequently passed to SetSdCardAccessibility.
This is "nn::fssrv::sf::IDeviceOperator".
     −
{| class="wikitable" border="1"
+
== OpenAccessFailureDetectionEventNotifier ==
|-
+
Takes 8-bytes of input and returns an [[#IEventNotifier]].
! Cmd || Name
+
 
|-
+
[8.0.0+] Now takes an additional 8-bytes of input.
| 0 || IsSdCardInserted
+
 
|-
+
== SetSaveDataSize ==
| 1 || GetSdCardSpeedMode
+
Takes two input u64s "size" and "journal_size", and writes them to fsp-srv object member variables.
|-
+
 
| 2 || [2.0.0+] GetSdCardCid
+
These variables are normally initialized with 32 MiB (0x2000000) and 16 MiB (0x1000000), respectively.
|-
+
 
| 3 || [2.0.0+] GetSdCardUserAreaSize
+
These variables don't seem to be actually used anywhere else (?)
|-
+
 
| 4 || [2.0.0+] GetSdCardProtectedAreaSize
+
== SetSaveDataRootPath ==
|-
+
Takes an input path, and does snprintf(<fsp-srv object>->m_save_data_root_path, FS_MAX_PATH-1, "/%s", input_path);
| 5 || [2.0.0+] GetAndClearSdCardErrorInfo
+
 
|-
+
This path is normally all-zero. When this path is non-zero, the internal OpenSaveDataFileSystem function will create a DirectorySaveDataFileSystem if the target save is a user-save + a directory exists, instead of the normal savedata filesystem object.
| 100 || GetMmcCid
+
 
|-
+
== SetGlobalAccessLogMode ==
| 101 || GetMmcSpeedMode
+
Takes an input u32.
|-
+
 
| 110 || EraseMmc
+
== SetGlobalAccessLogMode ==
|-
+
Takes an input u32.
| 111 || GetMmcPartitionSize
+
 
|-
+
== GetGlobalAccessLogMode ==
| 112 || [2.0.0+] GetMmcPatrolCount
+
Returns an output u32.
|-
+
 
| 113 || [2.0.0+] GetAndClearMmcErrorInfo
+
GlobalAccessLogMode is normally 0.
|-
+
 
| 114 || [2.0.0+] GetMmcExtendedCsd
+
== OutputAccessLogToSdCard ==
|-
+
Takes a type-0x5 input buffer.
| 115 || [4.0.0+] SuspendMmcPatrol
+
 
|-
+
The input buffer is the string to output to the log. User-processes normally include a newline at the end.
| 116 || [4.0.0+] ResumeMmcPatrol
+
 
|-
+
User-processes only use this when the value previously loaded from [[#GetGlobalAccessLogMode]] has bit1 set.
| 200 || [[#IsGameCardInserted]]
+
 
|-
+
When bit1 in GlobalAccessLogMode is clear, FS-module will just return 0 for OutputAccessLogToSdCard. However even with that set the log doesn't show up SD, unknown why.
| 201 || EraseGameCard
+
 
|-
+
The input buffer is written to the "$FsAccessLog:/FsAccessLog.txt" file, where "$FsAccessLog" is the SD-card mount-name. It's written to the current end of the file(appended).
| 202 || [[#GetGameCardHandle]]
+
 
|-
+
== GetProgramIndexForAccessLog ==
| 203 || [[#GetGameCardUpdatePartitionInfo]]
+
No input, returns two 32-bit values "version" and "program_index".
|-
+
 
| 204 || FinalizeGameCardDriver
+
== OpenMultiCommitManager ==
|-
+
No input, returns an output [[#IMultiCommitManager]].
| 205 || GetGameCardAttribute
+
 
|-
+
== OpenBisWiper ==
| 206 || [[#GetGameCardDeviceCertificate]]
+
Takes an input u64 size and a TransferMemory handle. Returns an output [[#IWiper]].
|-
+
 
| 207 || GetGameCardAsicInfo
+
= IStorage =
|-
+
This is "nn::fssrv::sf::IStorage".
| 208 || GetGameCardIdSet
+
 
|-
+
This is the interface for a raw device, usually a block device.
| 209 || WriteToGameCardDirectly
+
 
|-
+
{| class="wikitable" border="1"
| 210 || SetVerifyWriteEnalbleFlag
  −
|-
  −
| 211 || GetGameCardImageHash
  −
|-
  −
| 212 || [2.0.0+] GetGameCardDeviceIdForProdCard
  −
|-
  −
| 213 || [2.0.0+] EraseAndWriteParamDirectly
  −
|-
  −
| 214 || [2.0.0+] ReadParamDirectly
   
|-
 
|-
| 215 || [2.0.0+] ForceEraseGameCard
+
! Cmd || Name
 
|-
 
|-
| 216 || [2.0.0+] GetGameCardErrorInfo
+
| 0 || [[#Read]]
 
|-
 
|-
| 217 || [2.1.0+] GetGameCardErrorReportInfo
+
| 1 || [[#Write]]
 
|-
 
|-
| 218 || [3.0.0+] GetGameCardDeviceId
+
| 2 || [[#Flush]]
 
|-
 
|-
| 219 || [8.0.0+] [[#ChallengeCardExistence]]
+
| 3 || [[#SetSize]]
 
|-
 
|-
| 220 || [9.0.0+] [[#GetGameCardCompatibilityType]]
+
| 4 || [[#GetSize]]
 
|-
 
|-
| 300 || SetSpeedEmulationMode
+
| 5 || [4.0.0+] OperateRange
|-
  −
| 301 || GetSpeedEmulationMode
  −
|-
  −
| 400 || [5.0.0+] SuspendSdmmcControl
  −
|-
  −
| 401 || [5.0.0+] ResumeSdmmcControl
  −
|-
  −
| 402 || [6.0.0+] [[#GetSdmmcConnectionStatus]]
  −
|-
  −
| 500 || [6.0.0+] [[#SetDeviceSimulationEvent]]
  −
|-
  −
| 501 || [6.0.0+] [[#ClearDeviceSimulationEvent]]
   
|}
 
|}
   −
== IsGameCardInserted ==
+
== Read ==
No input, returns a bool.
+
Takes a type-0x46 buffer, an offset and length.
   −
== GetGameCardHandle ==
+
== Write ==
No input, returns an u32 '''GameCardHandle'''.
+
Takes a type-0x45 buffer, an offset and length.
   −
== GetGameCardUpdatePartitionInfo ==
+
== Flush ==
Returns a [[NCM_services#ProgramId|ProgramId]] and the title-version for it.
+
No input.
   −
* Output u32 with ARMS-gamecard: title-version v131162. This is the title-version for [[2.1.0]], which is the sysupdate included with this gamecard. Launch-day gamecards return title-version v450.
+
== SetSize ==
* Output u64 with ARMS-gamecard: [[NCM_services#ProgramId|ProgramId]] 0100000000000816.
+
Takes a size.
   −
[[NS_Services|NS]] appears to only use this with [[NCM_services|NCM]] for checking whether a sysupdate is required.
+
== GetSize ==
 +
Returns a size.
   −
== GetGameCardDeviceCertificate ==
+
= IFileSystem =
Takes a type-0x6 output buffer, an u32 '''GameCardHandle''' and an u64 '''DeviceCertificateBufferSize'''. No output.
+
This is "nn::fssrv::sf::IFileSystem".
   −
== ChallengeCardExistence ==
+
There are two main implementations of this interface:
Takes a type-0x6 output buffer, two type-0x5 input buffers and an u32 '''GameCardHandle'''. No output.
     −
[9.0.0+] The [[Account_services|account]] system module uses this as part of a new challenge-response mechanism for [[Network#aauth|application authentication]].
+
* '''nn::fs::fsa::IFileSystem''': The main IFileSystem implementation. Filesystem classes implement this interface, and FS code usually operates on this interface.
 +
* '''nn::fssrv::sf::IFileSystem''': Used for sending an IFileSystem over IPC. Not used outside of IPC code.
   −
== GetGameCardCompatibilityType ==
+
There are two adapter classes to convert between these interfaces:
Takes an u32 '''GameCardHandle''', returns an u8 '''CompatibilityType''' (0x00 = Global, 0x01 = China) from [[Gamecard_Format#Gamecard_Info|Gamecard Info]].
     −
== GetSdmmcConnectionStatus ==
+
* '''nn::fssrv::detail::FileSystemInterfaceAdapter''': Allows access to an nn::fs::fsa::IFileSystem via the nn::fssrv::sf::IFileSystem interface.
Takes a total of 4-bytes of input, returns a total of 8-bytes of output.
+
* '''nn::fs::detail::FileSystemServiceObjectAdapter''': Allows access to an nn::fssrv::sf::IFileSystem via the nn::fs::fsa::IFileSystem interface.
   −
== SetDeviceSimulationEvent ==
+
When the FS process returns a filesystem, it will wrap the filesystem object in a FileSystemInterfaceAdapter to return it over IPC.
Takes a total of 0x14-bytes of input, no output.
+
Then when FS application code receives that filesystem, it will wrap the nn::fssrv::sf::IFileSystem object in a FileSystemServiceObjectAdapter before using it.
 
  −
== ClearDeviceSimulationEvent ==
  −
Takes a total of 4-bytes of input, no output.
  −
 
  −
= IEventNotifier =
  −
This is "nn::fssrv::sf::IEventNotifier".
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 1,078: Line 1,271:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || [[#GetEventHandle]]
+
| 0 || CreateFile
|}
  −
 
  −
== GetEventHandle ==
  −
No input, returns an output Event handle. With official sw the EventClearMode is user-specified.
  −
 
  −
= ISaveDataTransferManager =
  −
This is "nn::fssrv::sf::ISaveDataTransferManager".
  −
 
  −
This was added with [[4.0.0]].
  −
 
  −
{| class="wikitable" border="1"
   
|-
 
|-
! Cmd || Name
+
| 1 || DeleteFile
 
|-
 
|-
| 0 || [[#GetChallenge]]
+
| 2 || CreateDirectory
 +
|-
 +
| 3 || DeleteDirectory
 +
|-
 +
| 4 || DeleteDirectoryRecursively
 +
|-
 +
| 5 || RenameFile
 +
|-
 +
| 6 || RenameDirectory
 +
|-
 +
| 7 || [[#GetEntryType]]
 +
|-
 +
| 8 || [[#OpenFile]]
 +
|-
 +
| 9 || [[#OpenDirectory]]
 +
|-
 +
| 10 || [[#Commit]]
 +
|-
 +
| 11 || [[#GetFreeSpaceSize]]
 +
|-
 +
| 12 || [[#GetTotalSpaceSize]]
 +
|-
 +
| 13 || [3.0.0+] [[#CleanDirectoryRecursively]]
 
|-
 
|-
| 16 || [[#SetToken]]
+
| 14 || [3.0.0+] [[#GetFileTimeStampRaw]]
 
|-
 
|-
| 32 || [[#OpenSaveDataExporter]]
+
| 15 || [4.0.0+] QueryEntry
 
|-
 
|-
| 64 || [[#OpenSaveDataImporter]]
+
| 16 || [15.0.0+] GetFileSystemAttribute
 
|}
 
|}
   −
== GetChallenge ==
+
== GetEntryType ==
No input/output, takes a type-0x6 output buffer.
+
Takes a type-0x9 input buffer for the path and returns [[#DirectoryEntryType]] as an output u32.
 +
 
 +
== OpenFile ==
 +
Takes a type-0x19 input buffer for the path, and an u32 '''mode'''. '''mode''' controls how the file is opened, based on which bits are set:
   −
== SetToken ==
+
* When bit 0 is set, the file is Readable: you can use the Read operation.
No input/output, takes a type-0x5 input buffer.
+
* When bit 1 is set, the file is Writable: you can use the Write operation.
 +
* When bit 2 is set, the file is Appendable: unless this bit is set, you will not be able to write beyond the end of a file (such writes will result in an error 0x307202)
   −
== OpenSaveDataExporter ==
+
== OpenDirectory ==
Takes an input u8 [[#SaveDataSpaceId]] and u64, returns an [[#ISaveDataExporter]].
+
Takes a type-0x9 input buffer for the path and an u64 '''filter_flags'''. '''filter_flags''' controls what type of entries are read by the [[#IDirectory]]: bitmask 0x1 = directories, bitmask 0x2 = files.
   −
== OpenSaveDataImporter ==
+
== Commit ==
Takes an input u8 [[#SaveDataSpaceId]] and a 0x10-byte userID, and a type-0x5 input buffer. Returns an output u64 and an [[#ISaveDataImporter]].
+
Like [https://3dbrew.org/wiki/FS:ControlArchive 3DS], this has to be used after writing to savedata for the changes to take affect.
   −
= ISaveDataTransferManagerForSaveDataRepair =
+
== GetFreeSpaceSize ==
This is "nn::fssrv::sf::ISaveDataTransferManagerForSaveDataRepair".
+
Takes a type-0x9 input buffer for the path and returns an output byte-size u64 for the total free space with this FS.
   −
This was added with [[9.0.0]].
+
== GetTotalSpaceSize ==
 +
Takes a type-0x9 input buffer for the path and returns an output byte-size u64 for the total space available with this FS(free+used).
   −
{| class="wikitable" border="1"
+
== CleanDirectoryRecursively ==
|-
+
Takes a type-0x9 input buffer for the path and clears the contents of the directory specified in the path.
! Cmd || Name
+
 
|-
+
== GetFileTimeStampRaw ==
| 0 || [[#GetChallenge]]
+
Takes a type-0x19 input buffer for the path and returns a 0x20-byte struct. This contains 3 u64s and an u8.
 +
 
 +
= IDirectory =
 +
This is "nn::fssrv::sf::IDirectory".
 +
 
 +
{| class="wikitable" border="1"
 
|-
 
|-
| 16 || [[#SetKeyPackage]]
+
! Cmd || Name
 
|-
 
|-
| 80 || [[#OpenSaveDataExporterAndGetEncryptedKey]]
+
| 0 || [[#Read]]
 
|-
 
|-
| 81 || [[#PrepareOpenSaveDataImporter]]
+
| 1 || [[#GetEntryCount]]
|-
  −
| 90 || [[#OpenSaveDataImporter]]
  −
|-
  −
| 91 || [[#OpenSaveDataImporter2]]
  −
|-
  −
| 100 || [[#OpenSaveDataExporterWithKey]]
  −
|-
  −
| 110 || [[#OpenSaveDataImporterWithKey]]
   
|}
 
|}
   −
== SetKeyPackage ==
+
== Read ==
No input/output, takes a type-0x5 input buffer.
+
Takes a type-0x6 output buffer. Returns an output u64(?) for the total number of read entries, this is 0 when no more entries are available.
   −
== OpenSaveDataExporterAndGetEncryptedKey ==
+
The output buffer contains the read array of [[#DirectoryEntry]]. This doesn't include entries for "." and "..".
Takes a total of 0x10-bytes of input and a type-0x1A output buffer to receive a RsaEncryptedKey. Returns an [[#ISaveDataDivisionExporter]].
     −
== PrepareOpenSaveDataImporter ==
+
== GetEntryCount ==
Takes a type-0x1A output buffer to receive a RsaEncryptedKey.
+
Returns an u64 for the total number of readable entries.
   −
== OpenSaveDataImporter ==
+
= DirectoryEntry =
Takes a total of 0x18-bytes of input and two type-0x5 input buffers, returns an [[#ISaveDataDivisionImporter]].
+
This is "nn::fs::DirectoryEntry".
 
  −
== OpenSaveDataImporter2 ==
  −
Takes a total of 0x18-bytes of input and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
  −
 
  −
== OpenSaveDataExporterWithKey ==
  −
Takes a total of 0x20-bytes of input, returns an [[#ISaveDataDivisionExporter]].
  −
 
  −
== OpenSaveDataImporterWithKey ==
  −
Takes a total of 0x28-bytes of input and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
  −
 
  −
= ISaveDataExporter =
  −
This is "nn::fssrv::sf::ISaveDataExporter".
  −
 
  −
This was added with [[4.0.0]].
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Cmd || Name
+
! Offset || Size || Description
 
|-
 
|-
| 0 || [[#GetSaveDataInfo]]
+
| 0x0 || 0x301 || Path
 
|-
 
|-
| 1 || [[#GetRestSize]]
+
| 0x301 || 0x1 || File attributes (bit 0 = is directory; bit 1 = archive bit)
 
|-
 
|-
| 16 || [[#Pull]]
+
| 0x302 || 0x2 || Padding?
 +
|-
 +
| 0x304 || 0x1 || [[#DirectoryEntryType]]
 +
|-
 +
| 0x305 || 0x3 || Padding?
 
|-
 
|-
| 17 || [[#PullInitialData]]
+
| 0x308 || 0x8 || Filesize, 0 for directories.
 
|}
 
|}
   −
== GetSaveDataInfo ==
+
= DirectoryEntryType =
No input/output, takes a type-0x1A [[#SaveDataInfo]] output buffer.
+
This is "nn::fs::DirectoryEntryType".
   −
The actual name for this is the SaveDataExporter constructor. This is used automatically after [[#OpenSaveDataExporter]] by official sw.
+
An s8 value indicating a directory entry type. The current values are:
 
  −
== GetRestSize ==
  −
No input, returns an output u64.
  −
 
  −
== Pull ==
  −
Takes a type-0x6 output buffer, returns an output u64.
  −
 
  −
== PullInitialData ==
  −
No input/output, takes a type-0x6 output buffer.
  −
 
  −
= ISaveDataImporter =
  −
This is "nn::fssrv::sf::ISaveDataImporter".
  −
 
  −
This was added with [[4.0.0]].
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Cmd || Name
+
! Value || Description
 
|-
 
|-
| 0 || [[#GetSaveDataInfo]]
+
| 0 || Directory
 
|-
 
|-
| 1 || [[#GetRestSize]]
+
| 1 || File
|-
  −
| 16 || [[#Push]]
  −
|-
  −
| 17 || [[#Finalize]]
   
|}
 
|}
   −
== GetSaveDataInfo ==
+
= IFile =
No input/output, takes a type-0x1A [[#GetSaveDataInfo]] output buffer.
+
This is "nn::fssrv::sf::IFile".
 
  −
The actual name for this is the SaveDataImporter constructor. This is used automatically after [[#OpenSaveDataImporter]] by official sw.
  −
 
  −
== GetRestSize ==
  −
No input, returns an output u64.
  −
 
  −
== Push ==
  −
No input/output, takes a type-0x5 input buffer.
  −
 
  −
== Finalize ==
  −
No input/output.
  −
 
  −
= ISaveDataTransferManagerWithDivision =
  −
This is "nn::fssrv::sf::ISaveDataTransferManagerWithDivision".
  −
 
  −
This was added with [[5.0.0]].
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 1,234: Line 1,395:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || [[#GetChallenge]]
+
| 0 || Read
 
|-
 
|-
| 16 || [[#SetKeySeedPackage]]
+
| 1 || Write
 
|-
 
|-
| 32 || [[#OpenSaveDataExporter]]
+
| 2 || Flush
 
|-
 
|-
| 33 || [[#OpenSaveDataExporterForDiffExport]]
+
| 3 || SetSize
 
|-
 
|-
| 34 || [6.0.0+] [[#OpenSaveDataExporterByContext]]
+
| 4 || GetSize
 
|-
 
|-
|rowspan="2"| 64 || [5.0.0-5.1.0] OpenSaveDataImporter
+
| 5 || [4.0.0+] OperateRange
 
|-
 
|-
| [6.0.0+] [[#OpenSaveDataImporterDeprecated]]
+
| 6 || [12.0.0+] OperateRangeWithBuffer
 +
|}
 +
 
 +
= ISaveDataInfoReader =
 +
This is "nn::fssrv::sf::ISaveDataInfoReader".
 +
 
 +
{| class="wikitable" border="1"
 
|-
 
|-
| 65 || [[#OpenSaveDataImporterForDiffImport]]
+
! Cmd || Name
 
|-
 
|-
| 66 || [6.0.0+] [[#OpenSaveDataImporterForDuplicateDiffImport]]
+
| 0 || [[#ReadSaveDataInfo]]
|-
  −
| 67 || [6.0.0+] [[#OpenSaveDataImporter]]
  −
|-
  −
| 68 || [6.0.0+] [[#OpenSaveDataImporterByContext]]
  −
|-
  −
| 69 || [6.0.0+] [[#CancelSuspendingImport]]
   
|}
 
|}
   −
== GetChallenge ==
+
== ReadSaveDataInfo ==
No input/output, takes a type-0x6 output buffer containing the '''Challenge'''.
+
Takes a type-0x6 output buffer. Returns an output u64 for total output entries. This buffer contains an array of [[#SaveDataInfo]].
   −
== SetKeySeedPackage ==
+
This is used to get [[#SaveDataInfo]] for all savedata on the system (or all savedata for the current [[#SaveDataSpaceId]]). When used multiple times, it will resume reading where it left off, until no more entries are available (in that case the out u64 is value 0).
No input/output, takes a type-0x5 input buffer containing the '''KeySeedPackage'''.
     −
== OpenSaveDataExporter ==
+
= IDeviceOperator =
Takes an input u8 [[#SaveDataSpaceId]] and u64. Returns an [[#ISaveDataDivisionExporter]].
+
This is "nn::fssrv::sf::IDeviceOperator".
   −
== OpenSaveDataExporterForDiffExport ==
+
{| class="wikitable" border="1"
Takes an input u8 [[#SaveDataSpaceId]], an u64, and a type-0x5 input buffer [[#InitialDataVersion2]]. Returns an [[#ISaveDataDivisionExporter]].
+
|-
 
+
! Cmd || Name
== OpenSaveDataExporterByContext ==
+
|-
No input/output, takes a type-0x5 input buffer, returns an [[#ISaveDataDivisionExporter]].
+
| 0 || [[#IsSdCardInserted]]
 
+
|-
== OpenSaveDataImporterDeprecated ==
+
| 1 || [[#GetSdCardSpeedMode]]
Takes an input u8 [[#SaveDataSpaceId]], a 0x10-byte userID, and a type-0x5 input buffer [[#InitialDataVersion2]]. Returns an [[#ISaveDataDivisionImporter]].
+
|-
 
+
| 2 || [2.0.0+] [[#GetSdCardCid]]
== OpenSaveDataImporterForDiffImport ==
+
|-
Takes an input u8 [[#SaveDataSpaceId]], an u64, and a type-0x5 input buffer [[#InitialDataVersion2]], returns an [[#ISaveDataDivisionImporter]].
+
| 3 || [2.0.0+] [[#GetSdCardUserAreaSize]]
 
+
|-
== OpenSaveDataImporterForDuplicateDiffImport ==
+
| 4 || [2.0.0+] [[#GetSdCardProtectedAreaSize]]
Takes an input u8 and an u64, and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
+
|-
 
+
| 5 || [2.0.0+] [[#GetAndClearSdCardErrorInfo]]
== OpenSaveDataImporter ==
+
|-
Takes an input u8, an u8(bool), a 0x10-byte struct, and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
+
| 100 || [[#GetMmcCid]]
 
+
|-
== OpenSaveDataImporterByContext ==
+
| 101 || [[#GetMmcSpeedMode]]
No input/output, takes a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
+
|-
 
+
| 110 || [[#EraseMmc]]
== CancelSuspendingImport ==
  −
Takes an input u64 and a 0x10-byte struct, no output.
  −
 
  −
= ISaveDataDivisionExporter =
  −
This is "nn::fssrv::sf::ISaveDataDivisionExporter".
  −
 
  −
This was added with [[5.0.0]].
  −
 
  −
{| class="wikitable" border="1"
   
|-
 
|-
! Cmd || Name
+
| 111 || [[#GetMmcPartitionSize]]
 
|-
 
|-
| 0 || [[#SetDivisionCount]]
+
| 112 || [2.0.0+] [[#GetMmcPatrolCount]]
 
|-
 
|-
| 1 || [6.0.0+] [[#GetSaveDataInfo]]
+
| 113 || [2.0.0+] [[#GetAndClearMmcErrorInfo]]
 
|-
 
|-
| 16 || [[#OpenSaveDataDiffChunkIterator]]
+
| 114 || [2.0.0+] [[#GetMmcExtendedCsd]]
 
|-
 
|-
| 48 || [[#OpenSaveDataChunkExporter]]
+
| 115 || [4.0.0+] [[#SuspendMmcPatrol]]
 
|-
 
|-
| 64 || [6.0.0-8.1.0] [[#FinalizeFullExport]]
+
| 116 || [4.0.0+] [[#ResumeMmcPatrol]]
 
|-
 
|-
| 65 || [6.0.0-8.1.0] [[#FinalizeDiffExport]]
+
| 200 || [[#IsGameCardInserted]]
 
|-
 
|-
| 66 || [6.0.0+] [[#CancelExport]]
+
| 201 || [[#EraseGameCard]]
 
|-
 
|-
| 67 || [6.0.0+] [[#SuspendExport]]
+
| 202 || [[#GetGameCardHandle]]
 
|-
 
|-
| 70 || [6.0.0+] [[#GetKeySeed]]
+
| 203 || [[#GetGameCardUpdatePartitionInfo]]
 +
|-
 +
| 204 || [[#FinalizeGameCardDriver]]
 +
|-
 +
| 205 || [[#GetGameCardAttribute]]
 +
|-
 +
| 206 || [[#GetGameCardDeviceCertificate]]
 +
|-
 +
| 207 || [[#GetGameCardAsicInfo]]
 +
|-
 +
| 208 || [[#GetGameCardIdSet]]
 +
|-
 +
| 209 || [[#WriteToGameCardDirectly]]
 +
|-
 +
| 210 || [[#SetVerifyWriteEnalbleFlag]]
 +
|-
 +
| 211 || [[#GetGameCardImageHash]]
 +
|-
 +
| 212 || [2.0.0+] [[#GetGameCardDeviceIdForProdCard]]
 +
|-
 +
| 213 || [2.0.0+] [[#EraseAndWriteParamDirectly]]
 
|-
 
|-
| 71 || [6.0.0+] [[#GetInitialDataMac]]
+
| 214 || [2.0.0+] [[#ReadParamDirectly]]
 
|-
 
|-
| 72 || [6.0.0+] [[#FinalizeExport]]
+
| 215 || [2.0.0+] [[#ForceEraseGameCard]]
 
|-
 
|-
| 73 || [9.0.0+] [[#GetInitialDataMacKeyGeneration]]
+
| 216 || [2.0.0+] [[#GetGameCardErrorInfo]]
 
|-
 
|-
| 80 || [6.0.0+] [[#GetImportInitialDataAad]]
+
| 217 || [2.1.0+] [[#GetGameCardErrorReportInfo]]
 
|-
 
|-
| 81 || [6.0.0+] [[#SetExportInitialDataAad]]
+
| 218 || [3.0.0+] [[#GetGameCardDeviceId]]
 
|-
 
|-
| 96 || [6.0.0+] [[#GetReportInfo]]
+
| 219 || [8.0.0+] [[#ChallengeCardExistence]]
|}
+
|-
 
+
| 220 || [9.0.0+] [[#GetGameCardCompatibilityType]]
== SetDivisionCount ==
+
|-
Takes an input u32, no output.
+
| 300 || [[#SetSpeedEmulationMode]]
 
+
|-
== OpenSaveDataChunkExporter ==
+
| 301 || [[#GetSpeedEmulationMode]]
Takes an input u32, returns an [[#ISaveDataChunkExporter]].
+
|-
 
+
| 400 || [5.0.0+] [[#SuspendSdmmcControl]]
== FinalizeFullExport ==
+
|-
No input, returns two 0x10-byte output structs.
+
| 401 || [5.0.0+] [[#ResumeSdmmcControl]]
 +
|-
 +
| 402 || [6.0.0+] [[#GetSdmmcConnectionStatus]]
 +
|-
 +
| 500 || [6.0.0+] [[#SetDeviceSimulationEvent]]
 +
|-
 +
| 501 || [6.0.0+] [[#ClearDeviceSimulationEvent]]
 +
|}
   −
== FinalizeDiffExport ==
+
== IsSdCardInserted ==
No input, returns an output 0x10-byte struct.
+
No input. Returns an output bool.
   −
== CancelExport ==
+
== GetSdCardSpeedMode ==
No input/output.
+
No input. Returns an output [[#SdCardSpeedMode]].
   −
== SuspendExport ==
+
== GetSdCardCid ==
No input/output, takes a type-0x6 output buffer.
+
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.
   −
== GetKeySeed ==
+
== GetSdCardUserAreaSize ==
No input, returns an output 0x10-byte struct.
+
No input. Returns an output s64 '''SdCardUserAreaSize'''.
   −
== GetInitialDataMac ==
+
== GetSdCardProtectedAreaSize ==
No input, returns an output 0x10-byte struct.
+
No input. Returns an output s64 '''SdCardProtectedAreaSize'''.
   −
== FinalizeExport ==
+
== GetAndClearSdCardErrorInfo ==
No input/output.
+
Takes a type-0x6 output buffer '''LogBuffer''' and an input s64 '''LogBufferSize'''. Returns an output [[#StorageErrorInfo]] and an output s64 '''LogSize'''.
   −
== SetExportInitialDataAad ==
+
== GetMmcCid ==
Takes an input 0x20-byte struct, no output.
+
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.
   −
= ISaveDataDivisionImporter =
+
== GetMmcSpeedMode ==
This is "nn::fssrv::sf::ISaveDataDivisionImporter".
+
No input. Returns an output [[#MmcSpeedMode]].
   −
This was added with [[5.0.0]].
+
== EraseMmc ==
 +
Takes an input [[#MmcPartition]]. No output.
   −
{| class="wikitable" border="1"
+
== GetMmcPartitionSize ==
|-
+
Takes an input [[#MmcPartition]]. Returns an output s64 '''MmcPartitionSize'''.
! Cmd || Name
  −
|-
  −
| 0 || [6.0.0+] [[#GetSaveDataInfo]]
  −
|-
  −
| 16 || [[#OpenSaveDataDiffChunkIterator]]
  −
|-
  −
| 32 || [[#InitializeImport]]
  −
|-
  −
| 33 || [[#FinalizeImport]]
  −
|-
  −
| 34 || [6.0.0+] [[#CancelImport]]
  −
|-
  −
| 35 || [6.0.0+] [[#GetImportContext]]
  −
|-
  −
| 36 || [6.0.0+] [[#SuspendImport]]
  −
|-
  −
| 48 || [[#OpenSaveDataChunkImporter]]
  −
|-
  −
| 64 || [6.0.0+] [[#GetImportInitialDataAad]]
  −
|-
  −
| 80 || [6.0.0+] [[#GetReportInfo]]
  −
|}
     −
== GetSaveDataInfo ==
+
== GetMmcPatrolCount ==
No input/output, takes a type-0x6 output buffer.
+
No input. Returns an output u32 '''MmcPatrolCount'''.
   −
== OpenSaveDataDiffChunkIterator ==
+
== GetAndClearMmcErrorInfo ==
No input, returns an [[#ISaveDataChunkIterator]].
+
Takes a type-0x6 output buffer '''LogBuffer''' and an input s64 '''LogBufferSize'''. Returns an output [[#StorageErrorInfo]] and an output s64 '''LogSize'''.
   −
== InitializeImport ==
+
== GetMmcExtendedCsd ==
No input, returns an output u64.
+
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.
   −
== FinalizeImport ==
+
== SuspendMmcPatrol ==
 
No input/output.
 
No input/output.
   −
== CancelImport ==
+
== ResumeMmcPatrol ==
 
No input/output.
 
No input/output.
   −
== GetImportContext ==
+
== IsGameCardInserted ==
No input/output, takes a type-0x6 output buffer.
+
No input. Returns an output bool.
 +
 
 +
== EraseGameCard ==
 +
Takes an input [[#GameCardSize]] and an input u64 '''NormalAreaSize'''. No output.
 +
 
 +
== GetGameCardHandle ==
 +
No input. Returns an output [[#GameCardHandle]].
 +
 
 +
== GetGameCardUpdatePartitionInfo ==
 +
Takes an input [[#GameCardHandle]]. Returns an output [[#GameCardUpdatePartitionInfo]].
   −
== SuspendImport ==
+
== FinalizeGameCardDriver ==
 
No input/output.
 
No input/output.
   −
== OpenSaveDataChunkImporter ==
+
== GetGameCardAttribute ==
Takes an input u32, returns an [[#ISaveDataChunkImporter]].
+
Takes an input [[#GameCardHandle]]. Returns an output [[#GameCardAttribute]].
 +
 
 +
== GetGameCardDeviceCertificate ==
 +
Takes a type-0x6 output buffer, an input s64 '''BufferSize''' and an input [[#GameCardHandle]]. No output.
 +
 
 +
== GetGameCardAsicInfo ==
 +
Takes a type-0x5 input buffer '''FwBuffer''', a type-0x6 output buffer containing [[#RmaInformation]] and two input s64s '''FwBufferSize''' and '''RmaInformationSize'''. No output.
 +
 
 +
== GetGameCardIdSet ==
 +
Takes a type-0x6 output buffer containing a [[#GameCardIdSet]] and an input s64 '''BufferSize'''. No output.
 +
 
 +
== WriteToGameCardDirectly ==
 +
Takes a type-0x6 output buffer and two input s64s '''Offset''' and '''BufferSize'''. No output.
   −
== GetImportInitialDataAad ==  
+
== SetVerifyWriteEnalbleFlag ==
No input, returns an output 0x20-byte struct.
+
Takes an input bool. No output.
   −
== GetReportInfo ==
+
== GetGameCardImageHash ==
No input, returns an output 0x20-byte struct.
+
Takes a type-0x6 output buffer, an input s64 '''BufferSize''' and an input [[#GameCardHandle]]. No output.
   −
= ISaveDataChunkIterator =
+
== GetGameCardDeviceIdForProdCard ==
This is "nn::fssrv::sf::ISaveDataChunkIterator".
+
Takes a type-0x5 input buffer '''CardHeaderForDev''', a type-0x6 output buffer and two input s64s '''CardHeaderForDevSize''' and '''BufferSize'''. No output.
   −
This was added with [[5.0.0]].
+
== EraseAndWriteParamDirectly ==
 +
Takes a type-0x5 input buffer and an input s64 '''BufferSize'''. No output.
   −
{| class="wikitable" border="1"
+
== ReadParamDirectly ==
|-
+
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.
! Cmd || Name
  −
|-
  −
| 0 || [[#Next]]
  −
|-
  −
| 1 || [[#IsEnd]]
  −
|-
  −
| 16 || [[#GetId]]
  −
|}
     −
== Next ==
+
== ForceEraseGameCard ==
 
No input/output.
 
No input/output.
   −
== IsEnd ==
+
== GetGameCardErrorInfo ==
No input, returns an output u8.
+
No input. Returns an output [[#GameCardErrorInfo]].
   −
== GetId ==
+
== GetGameCardErrorReportInfo ==
No input, returns an output u32.
+
No input. Returns an output [[#GameCardErrorReportInfo]].
   −
= ISaveDataChunkExporter =
+
== GetGameCardDeviceId ==
This is "nn::fssrv::sf::ISaveDataChunkExporter".
+
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.
   −
This was added with [[5.0.0]].
+
== ChallengeCardExistence ==
 +
Takes a type-0x6 output buffer, two type-0x5 input buffers and an input [[#GameCardHandle]]. No output.
   −
{| class="wikitable" border="1"
+
[9.0.0+] The [[Account_services|account]] system module uses this as part of a new challenge-response mechanism for [[Network#aauth|application authentication]].
|-
  −
! Cmd || Name
  −
|-
  −
| 0 || [[#Pull]]
  −
|-
  −
| 16 || [6.0.0+] [[#GetRestRawDataSize]]
  −
|}
     −
== Pull ==
+
== GetGameCardCompatibilityType ==
Takes an input u64 and a type-0x6 output buffer, returns an output u64.
+
Takes an input [[#GameCardHandle]]. Returns an output [[#GameCardCompatibilityType]].
   −
== GetRestRawDataSize ==
+
== SetSpeedEmulationMode ==
No input, returns an output u64.
+
Takes an input [[#SpeedEmulationMode]]. No output.
   −
= ISaveDataChunkImporter =
+
== GetSpeedEmulationMode ==
This is "nn::fssrv::sf::ISaveDataChunkImporter".
+
No input. Returns an output [[#SpeedEmulationMode]].
   −
This was added with [[5.0.0]].
+
== SuspendSdmmcControl ==
 +
No input/output.
 +
 
 +
== ResumeSdmmcControl ==
 +
No input/output.
 +
 
 +
== GetSdmmcConnectionStatus ==
 +
Takes a total of 4-bytes of input. Returns a total of 8-bytes of output.
 +
 
 +
== SetDeviceSimulationEvent ==
 +
Takes a total of 0x14-bytes of input. No output.
 +
 
 +
== ClearDeviceSimulationEvent ==
 +
Takes a total of 4-bytes of input. No output.
 +
 
 +
= IEventNotifier =
 +
This is "nn::fssrv::sf::IEventNotifier".
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 1,476: Line 1,657:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 0 || [[#Push]]
+
| 0 || [[#GetEventHandle]]
 
|}
 
|}
   −
== Push ==
+
== GetEventHandle ==
Takes an input u64 and a type-0x5 input buffer, no output.
+
No input, returns an output Event handle. With official sw the EventClearMode is user-specified.
   −
= ISaveDataTransferProhibiter =
+
= ISaveDataTransferManager =
This was added with [[6.0.0]].
+
This is "nn::fssrv::sf::ISaveDataTransferManager".
   −
This doesn't seem to handle any commands (?).
+
This was added with [[4.0.0]].
 
  −
= IMultiCommitManager =
  −
This was added with [[6.0.0]].
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 1,494: Line 1,672:  
! Cmd || Name
 
! Cmd || Name
 
|-
 
|-
| 1 || [[#Add]]
+
| 0 || [[#GetChallenge]]
 
|-
 
|-
| 2 || [[#Commit]]
+
| 16 || [[#SetToken]]
 +
|-
 +
| 32 || [[#OpenSaveDataExporter]]
 +
|-
 +
| 64 || [[#OpenSaveDataImporter]]
 
|}
 
|}
   −
== Add ==
+
== GetChallenge ==
Takes an input [[#IFilesystem]], no output.
+
No input/output, takes a type-0x6 output buffer.
 +
 
 +
== SetToken ==
 +
No input/output, takes a type-0x5 input buffer.
 +
 
 +
== OpenSaveDataExporter ==
 +
Takes an input u8 [[#SaveDataSpaceId]] and u64, returns an [[#ISaveDataExporter]].
 +
 
 +
== OpenSaveDataImporter ==
 +
Takes an input u8 [[#SaveDataSpaceId]] and a 0x10-byte userID, and a type-0x5 input buffer. Returns an output u64 and an [[#ISaveDataImporter]].
   −
== Commit ==
+
= ISaveDataTransferManagerForSaveDataRepair =
No input/output.
+
This is "nn::fssrv::sf::ISaveDataTransferManagerForSaveDataRepair".
   −
= FileSystemProxyType =
+
This was added with [[9.0.0]].
This is "nn::fs::FileSystemProxyType".
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Cmd || Name
 
|-
 
|-
| 0 || Code
+
| 0 || [[#GetChallenge]]
 
|-
 
|-
| 1 || Rom
+
| 16 || [[#SetKeyPackage]]
 
|-
 
|-
| 2 || Logo
+
| 80 || [[#OpenSaveDataExporterAndGetEncryptedKey]]
 
|-
 
|-
| 3 || Control
+
| 81 || [[#PrepareOpenSaveDataImporter]]
 
|-
 
|-
| 4 || Manual
+
| 90 || [[#OpenSaveDataImporter]]
 
|-
 
|-
| 5 || Meta
+
| 91 || [[#OpenSaveDataImporter2]]
 
|-
 
|-
| 6 || Data
+
| 100 || [[#OpenSaveDataExporterWithKey]]
 
|-
 
|-
| 7 || Package
+
| 110 || [[#OpenSaveDataImporterWithKey]]
|-
  −
| 8 || [4.0.0+] RegisteredUpdate
   
|}
 
|}
   −
= ContentType =
+
== SetKeyPackage ==
This is "nn::fs::ContentType".
+
No input/output, takes a type-0x5 input buffer.
 +
 
 +
== OpenSaveDataExporterAndGetEncryptedKey ==
 +
Takes a total of 0x10-bytes of input and a type-0x1A output buffer to receive a RsaEncryptedKey. Returns an [[#ISaveDataDivisionExporter]].
 +
 
 +
== PrepareOpenSaveDataImporter ==
 +
Takes a type-0x1A output buffer to receive a RsaEncryptedKey.
   −
{| class="wikitable" border="1"
+
== OpenSaveDataImporter ==
|-
+
Takes a total of 0x18-bytes of input and two type-0x5 input buffers, returns an [[#ISaveDataDivisionImporter]].
! Value || Name
+
 
|-
+
== OpenSaveDataImporter2 ==
| 0 || Meta
+
Takes a total of 0x18-bytes of input and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
|-
+
 
| 1 || Control
+
== OpenSaveDataExporterWithKey ==
|-
+
Takes a total of 0x20-bytes of input, returns an [[#ISaveDataDivisionExporter]].
| 2 || Manual
+
 
|-
+
== OpenSaveDataImporterWithKey ==
| 3 || Logo
+
Takes a total of 0x28-bytes of input and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
|-
+
 
| 4 || Data
+
= ISaveDataMover =
|}
+
This is "nn::fssrv::sf::ISaveDataMover".
   −
= ContentStorageId =
+
This was added with [[10.0.0]].
This is "nn::fs::ContentStorageId".
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Cmd || Name
 
|-
 
|-
| 0 || System
+
| 8 || [[#Register]]
 
|-
 
|-
| 1 || User
+
| 16 || [[#Process]]
 
|-
 
|-
| 2 || SdCard
+
| 18 || [[#Cancel]]
 
|}
 
|}
   −
= SaveDataSpaceId =
+
== Register ==
This is "nn::fs::SaveDataSpaceId".
+
Takes an input u64, no output.
 +
 
 +
== Process ==
 +
Takes an input u64, returns an output u64.
 +
 
 +
== Cancel ==
 +
No input/output.
 +
 
 +
= ISaveDataTransferManagerForRepair =
 +
This is "nn::fssrv::sf::ISaveDataTransferManagerForRepair".
 +
 
 +
This was added with [[11.0.0]].
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Cmd || Name
 
|-
 
|-
| 0 || System
+
| 80 || [[#OpenSaveDataExporter]]
 
|-
 
|-
| 1 || User
+
| 90 || [[#OpenSaveDataImporter]]
|-
  −
| 2 || SdSystem
  −
|-
  −
| 3 || [3.0.0+] Temporary
  −
|-
  −
| 4 || [4.0.0+] SdUser
  −
|-
  −
| 100 || [3.0.0+] ProperSystem
  −
|-
  −
| 101 || [3.0.0+] SafeMode
   
|}
 
|}
   −
Determines the storage where the savedata is stored.
+
== OpenSaveDataExporter ==
 +
Takes a total of 0x10-bytes of input, returns an [[#ISaveDataDivisionExporter]].
 +
 
 +
== OpenSaveDataImporter ==
 +
Takes 1-byte of input, a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 +
 
 +
= ISaveDataExporter =
 +
This is "nn::fssrv::sf::ISaveDataExporter".
   −
= SaveDataType =
+
This was added with [[4.0.0]].
This is "nn::fs::SaveDataType".
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Cmd || Name
 
|-
 
|-
| 0 || System
+
| 0 || [[#GetSaveDataInfo]]
 
|-
 
|-
| 1 || Account
+
| 1 || [[#GetRestSize]]
 
|-
 
|-
| 2 || Bcat
+
| 16 || [[#Pull]]
 
|-
 
|-
| 3 || Device
+
| 17 || [[#PullInitialData]]
|-
  −
| 4 || [3.0.0+] Temporary
  −
|-
  −
| 5 || [3.0.0+] Cache
  −
|-
  −
| 6 || [4.0.0+] SystemBcat
   
|}
 
|}
   −
= SaveDataRank =
+
== GetSaveDataInfo ==
This is "nn::fs::SaveDataRank".
+
No input/output, takes a type-0x1A [[#SaveDataInfo]] output buffer.
   −
{| class="wikitable" border="1"
+
The actual name for this is the SaveDataExporter constructor. This is used automatically after [[#OpenSaveDataExporter]] by official sw.
|-
  −
! Value || Name
  −
|-
  −
| 0 || Primary
  −
|-
  −
| 1 || Secondary
  −
|}
     −
= SaveDataEnumerateOption =
+
== GetRestSize ==
This is "nn::fs::SaveDataEnumerateOption".
+
No input, returns an output u64.
 +
 
 +
== Pull ==
 +
Takes a type-0x6 output buffer, returns an output u64.
 +
 
 +
== PullInitialData ==
 +
No input/output, takes a type-0x6 output buffer.
   −
{| class="wikitable" border="1"
+
= ISaveDataImporter =
|-
+
This is "nn::fssrv::sf::ISaveDataImporter".
! Value || Name
  −
|-
  −
| 1 || AllRank
  −
|}
     −
= SaveDataFlags =
+
This was added with [[4.0.0]].
This is "nn::fs::SaveDataFlags".
      
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Cmd || Name
 
|-
 
|-
| 1 || KeepAfterResettingSystemSaveData
+
| 0 || [[#GetSaveDataInfo]]
 
|-
 
|-
| 2 || KeepAfterRefurbishment
+
| 1 || [[#GetRestSize]]
 
|-
 
|-
| 4 || KeepAfterResettingSystemSaveDataWithoutUserSaveData
+
| 16 || [[#Push]]
 
|-
 
|-
| 8 || NeedsSecureDelete
+
| 17 || [[#Finalize]]
 
|}
 
|}
   −
= SaveDataMetaType =
+
== GetSaveDataInfo ==
This is "nn::fs::SaveDataMetaType".
+
No input/output, takes a type-0x1A [[#GetSaveDataInfo]] output buffer.
 +
 
 +
The actual name for this is the SaveDataImporter constructor. This is used automatically after [[#OpenSaveDataImporter]] by official sw.
 +
 
 +
== GetRestSize ==
 +
No input, returns an output u64.
 +
 
 +
== Push ==
 +
No input/output, takes a type-0x5 input buffer.
 +
 
 +
== Finalize ==
 +
No input/output.
 +
 
 +
= ISaveDataTransferManagerWithDivision =
 +
This is "nn::fssrv::sf::ISaveDataTransferManagerWithDivision".
 +
 
 +
This was added with [[5.0.0]].
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Cmd || Name
 +
|-
 +
| 0 || [[#GetChallenge]]
 
|-
 
|-
| 0 || None
+
| 16 || [[#SetKeySeedPackage]]
 
|-
 
|-
| 1 || Thumbnail
+
| 32 || [[#OpenSaveDataExporter]]
 
|-
 
|-
| 2 || ExtensionContext
+
| 33 || [[#OpenSaveDataExporterForDiffExport]]
|}
+
|-
 
+
| 34 || [6.0.0+] [[#OpenSaveDataExporterByContext]]
= ImageDirectoryId =
+
|-
This is "nn::fs::ImageDirectoryId".
+
|rowspan="2"| 64 || [5.0.0-5.1.0] OpenSaveDataImporter
 
+
|-
{| class="wikitable" border="1"
+
| [6.0.0+] [[#OpenSaveDataImporterDeprecated]]
 +
|-
 +
| 65 || [[#OpenSaveDataImporterForDiffImport]]
 
|-
 
|-
! Value || Name
+
| 66 || [6.0.0+] [[#OpenSaveDataImporterForDuplicateDiffImport]]
 
|-
 
|-
| 0 || Nand
+
| 67 || [6.0.0+] [[#OpenSaveDataImporter]]
 
|-
 
|-
| 1 || SdCard
+
| 68 || [6.0.0+] [[#OpenSaveDataImporterByContext]]
|}
  −
 
  −
= CloudBackupWorkStorageId =
  −
This is "nn::fs::CloudBackupWorkStorageId".
  −
 
  −
{| class="wikitable" border="1"
   
|-
 
|-
! Value || Name
+
| 69 || [6.0.0+] [[#CancelSuspendingImport]]
 
|-
 
|-
| 0 || Nand
+
| 70 || [10.0.0+] DecryptAndVerifyInitialData
 
|-
 
|-
| 1 || SdCard
+
| 80 || [11.0.0+] DecryptoAndVerifyPortContext
 
|}
 
|}
   −
= CustomStorageId =
+
== GetChallenge ==
This is "nn::fs::CustomStorageId".
+
No input/output, takes a type-0x6 output buffer containing the '''Challenge'''.
   −
{| class="wikitable" border="1"
+
== SetKeySeedPackage ==
|-
+
No input/output, takes a type-0x5 input buffer containing the '''KeySeedPackage'''.
! Value || Name
  −
|-
  −
| 0 || System
  −
|-
  −
| 1 || SdCard
  −
|}
     −
= Priority =
+
== OpenSaveDataExporter ==
This is "nn::fs::Priority".
+
Takes an input u8 [[#SaveDataSpaceId]] and u64. Returns an [[#ISaveDataDivisionExporter]].
   −
{| class="wikitable" border="1"
+
== OpenSaveDataExporterForDiffExport ==
|-
+
Takes an input u8 [[#SaveDataSpaceId]], an u64, and a type-0x5 input buffer [[#InitialDataVersion2]]. Returns an [[#ISaveDataDivisionExporter]].
! Value || Name
  −
|-
  −
| 0 || Realtime
  −
|-
  −
| 1 || Normal
  −
|-
  −
| 2 || Low
  −
|}
     −
= PriorityRaw =
+
== OpenSaveDataExporterByContext ==
This is "nn::fs::PriorityRaw".
+
No input/output, takes a type-0x5 input buffer, returns an [[#ISaveDataDivisionExporter]].
 +
 
 +
== OpenSaveDataImporterDeprecated ==
 +
Takes an input u8 [[#SaveDataSpaceId]], a 0x10-byte userID, and a type-0x5 input buffer [[#InitialDataVersion2]]. Returns an [[#ISaveDataDivisionImporter]].
 +
 
 +
== OpenSaveDataImporterForDiffImport ==
 +
Takes an input u8 [[#SaveDataSpaceId]], an u64, and a type-0x5 input buffer [[#InitialDataVersion2]], returns an [[#ISaveDataDivisionImporter]].
 +
 
 +
== OpenSaveDataImporterForDuplicateDiffImport ==
 +
Takes an input u8 and an u64, and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 +
 
 +
== OpenSaveDataImporter ==
 +
Takes an input u8, an u8(bool), a 0x10-byte struct, and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 +
 
 +
== OpenSaveDataImporterByContext ==
 +
No input/output, takes a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 +
 
 +
== CancelSuspendingImport ==
 +
Takes an input u64 and a 0x10-byte struct, no output.
 +
 
 +
= ISaveDataDivisionExporter =
 +
This is "nn::fssrv::sf::ISaveDataDivisionExporter".
 +
 
 +
This was added with [[5.0.0]].
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Cmd || Name
 
|-
 
|-
| 0 || Realtime
+
| 0 || [[#SetDivisionCount]]
 
|-
 
|-
| 1 || Normal
+
| 1 || [6.0.0+] [[#GetSaveDataInfo]]
 
|-
 
|-
| 2 || Low
+
| 16 || [[#OpenSaveDataDiffChunkIterator]]
 
|-
 
|-
| 3 || Background
+
| 48 || [[#OpenSaveDataChunkExporter]]
|}
  −
 
  −
= AbortSpecifier =
  −
This is "nn::fs::AbortSpecifier".
  −
 
  −
{| class="wikitable" border="1"
   
|-
 
|-
! Value || Name
+
| 64 || [6.0.0-8.1.0] [[#FinalizeFullExport]]
 
|-
 
|-
| 0 || Default
+
| 65 || [6.0.0-8.1.0] [[#FinalizeDiffExport]]
 
|-
 
|-
| 1 || Abort
+
| 66 || [6.0.0+] [[#CancelExport]]
 
|-
 
|-
| 2 || ReturnResult
+
| 67 || [6.0.0+] [[#SuspendExport]]
|}
  −
 
  −
= OperationId =
  −
This is "nn::fs::OperationId".
  −
 
  −
{| class="wikitable" border="1"
   
|-
 
|-
! Value || Name
+
| 70 || [6.0.0+] [[#GetKeySeed]]
 
|-
 
|-
| 0 || Clear
+
| 71 || [6.0.0+] [[#GetInitialDataMac]]
 
|-
 
|-
| 1 || ClearSignature
+
| 72 || [6.0.0+] [[#FinalizeExport]]
 
|-
 
|-
| 2 || InvalidateCache
+
| 73 || [9.0.0+] [[#GetInitialDataMacKeyGeneration]]
 
|-
 
|-
| 3 || QueryRange
+
| 80 || [6.0.0+] [[#GetImportInitialDataAad]]
|}
  −
 
  −
= MountHostOption =
  −
This is "nn::fs::MountHostOption".
  −
 
  −
{| class="wikitable" border="1"
   
|-
 
|-
! Value || Name
+
| 81 || [6.0.0+] [[#SetExportInitialDataAad]]
 
|-
 
|-
| 1 || PseudoCaseSensitive
+
| 96 || [6.0.0+] [[#GetReportInfo]]
 
|}
 
|}
   −
= BisPartitionId =
+
== SetDivisionCount ==
This is "nn::fs::BisPartitionId".
+
Takes an input u32, no output.
 +
 
 +
== OpenSaveDataChunkExporter ==
 +
Takes an input u32, returns an [[#ISaveDataChunkExporter]].
   −
{| class="wikitable" border="1"
+
== FinalizeFullExport ==
|-
+
No input, returns two 0x10-byte output structs.
! Value || Name
+
 
|-
+
== FinalizeDiffExport ==
| 0 || BootPartition1Root
+
No input, returns an output 0x10-byte struct.
 +
 
 +
== CancelExport ==
 +
No input/output.
 +
 
 +
== SuspendExport ==
 +
No input/output, takes a type-0x6 output buffer.
 +
 
 +
== GetKeySeed ==
 +
No input, returns an output 0x10-byte struct.
 +
 
 +
== GetInitialDataMac ==
 +
No input, returns an output 0x10-byte struct.
 +
 
 +
== FinalizeExport ==
 +
No input/output.
 +
 
 +
== SetExportInitialDataAad ==
 +
Takes an input 0x20-byte struct, no output.
 +
 
 +
= ISaveDataDivisionImporter =
 +
This is "nn::fssrv::sf::ISaveDataDivisionImporter".
 +
 
 +
This was added with [[5.0.0]].
 +
 
 +
{| class="wikitable" border="1"
 
|-
 
|-
| 10 || BootPartition2Root
+
! Cmd || Name
 
|-
 
|-
| 20 || UserDataRoot
+
| 0 || [6.0.0+] [[#GetSaveDataInfo]]
 +
|-
 +
| 16 || [[#OpenSaveDataDiffChunkIterator]]
 +
|-
 +
| 32 || [[#InitializeImport]]
 +
|-
 +
| 33 || [[#FinalizeImport]]
 +
|-
 +
| 34 || [6.0.0+] [[#CancelImport]]
 +
|-
 +
| 35 || [6.0.0+] [[#GetImportContext]]
 +
|-
 +
| 36 || [6.0.0+] [[#SuspendImport]]
 +
|-
 +
| 37 || [11.0.0+] FinalizeImportWithoutSwap
 +
|-
 +
| 48 || [[#OpenSaveDataChunkImporter]]
 
|-
 
|-
| 21 || BootConfigAndPackage2Part1
+
| 64 || [6.0.0+] [[#GetImportInitialDataAad]]
 +
|-
 +
| 80 || [6.0.0+] [[#GetReportInfo]]
 +
|}
 +
 
 +
== GetSaveDataInfo ==
 +
No input/output, takes a type-0x6 output buffer.
 +
 
 +
== OpenSaveDataDiffChunkIterator ==
 +
No input, returns an [[#ISaveDataChunkIterator]].
 +
 
 +
== InitializeImport ==
 +
No input, returns an output u64.
 +
 
 +
== FinalizeImport ==
 +
No input/output.
 +
 
 +
== CancelImport ==
 +
No input/output.
 +
 
 +
== GetImportContext ==
 +
No input/output, takes a type-0x6 output buffer.
 +
 
 +
== SuspendImport ==
 +
No input/output.
 +
 
 +
== OpenSaveDataChunkImporter ==
 +
Takes an input u32, returns an [[#ISaveDataChunkImporter]].
 +
 
 +
== GetImportInitialDataAad ==
 +
No input, returns an output 0x20-byte struct.
 +
 
 +
== GetReportInfo ==
 +
No input, returns an output 0x20-byte struct.
 +
 
 +
= ISaveDataChunkIterator =
 +
This is "nn::fssrv::sf::ISaveDataChunkIterator".
 +
 
 +
This was added with [[5.0.0]].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#Next]]
 +
|-
 +
| 1 || [[#IsEnd]]
 +
|-
 +
| 16 || [[#GetId]]
 +
|}
 +
 
 +
== Next ==
 +
No input/output.
 +
 
 +
== IsEnd ==
 +
No input, returns an output u8.
 +
 
 +
== GetId ==
 +
No input, returns an output u32.
 +
 
 +
= ISaveDataChunkExporter =
 +
This is "nn::fssrv::sf::ISaveDataChunkExporter".
 +
 
 +
This was added with [[5.0.0]].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#Pull]]
 +
|-
 +
| 16 || [6.0.0+] [[#GetRestRawDataSize]]
 +
|}
 +
 
 +
== Pull ==
 +
Takes an input u64 and a type-0x6 output buffer, returns an output u64.
 +
 
 +
== GetRestRawDataSize ==
 +
No input, returns an output u64.
 +
 
 +
= ISaveDataChunkImporter =
 +
This is "nn::fssrv::sf::ISaveDataChunkImporter".
 +
 
 +
This was added with [[5.0.0]].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#Push]]
 +
|}
 +
 
 +
== Push ==
 +
Takes an input u64 and a type-0x5 input buffer, no output.
 +
 
 +
= ISaveDataTransferProhibiter =
 +
This is "nn::fssrv::sf::ISaveDataTransferProhibiter".
 +
 
 +
This was added with [6.0.0+].
 +
 
 +
This doesn't seem to handle any commands (?).
 +
 
 +
= IMultiCommitManager =
 +
This is "nn::fssrv::sf::IMultiCommitManager".
 +
 
 +
This was added with [6.0.0+].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 1 || [[#Add]]
 +
|-
 +
| 2 || [[#Commit]]
 +
|}
 +
 
 +
== Add ==
 +
Takes an input [[#IFilesystem]], no output.
 +
 
 +
== Commit ==
 +
No input/output.
 +
 
 +
= IWiper =
 +
This is "nn::fssrv::sf::IWiper".
 +
 
 +
This was added with [[10.0.0]].
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| 0 || [[#Startup|Startup]]
 +
|-
 +
| 16 || [[#Process_2|Process]]
 +
|}
 +
 
 +
== Startup ==
 +
No input. Returns an u64.
 +
 
 +
== Process ==
 +
No input. Returns an u64.
 +
 
 +
= IStorageDeviceManager =
 +
This is "nn::fssrv::storage::sf::IStorageDeviceManager".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| N/A || IsInserted
 +
|-
 +
| N/A || IsHandleValid
 +
|-
 +
| N/A || OpenDetectionEvent
 +
|-
 +
| N/A || OpenOperator
 +
|-
 +
| N/A || OpenDevice
 +
|-
 +
| N/A || OpenStorage
 +
|-
 +
| N/A || Invalidate
 +
|}
 +
 
 +
= IStorageDeviceOperator =
 +
This is "nn::fssrv::storage::sf::IStorageDeviceOperator".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| N/A || Operate
 +
|-
 +
| N/A || OperateIn
 +
|-
 +
| N/A || OperateOut
 +
|-
 +
| N/A || OperateOut2
 +
|-
 +
| N/A || OperateInOut
 +
|-
 +
| N/A || OperateIn2Out
 +
|}
 +
 
 +
= IStorageDevice =
 +
This is "nn::fssrv::storage::sf::IStorageDevice".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Cmd || Name
 +
|-
 +
| N/A || GetHandle
 +
|-
 +
| N/A || IsHandleValid
 +
|-
 +
| N/A || OpenOperator
 +
|-
 +
| N/A || Read
 +
|-
 +
| N/A || Write
 +
|-
 +
| N/A || Flush
 +
|-
 +
| N/A || SetSize
 +
|-
 +
| N/A || GetSize
 +
|-
 +
| N/A || OperateRange
 +
|}
 +
 
 +
= FileSystemProxyType =
 +
This is "nn::fs::FileSystemProxyType".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Code
 +
|-
 +
| 1 || Rom
 +
|-
 +
| 2 || Logo
 +
|-
 +
| 3 || Control
 +
|-
 +
| 4 || Manual
 +
|-
 +
| 5 || Meta
 +
|-
 +
| 6 || Data
 +
|-
 +
| 7 || Package
 +
|-
 +
| 8 || [4.0.0+] RegisteredUpdate
 +
|}
 +
 
 +
= ContentType =
 +
This is "nn::fs::ContentType".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Meta
 +
|-
 +
| 1 || Control
 +
|-
 +
| 2 || Manual
 +
|-
 +
| 3 || Logo
 +
|-
 +
| 4 || Data
 +
|}
 +
 
 +
= ContentStorageId =
 +
This is "nn::fs::ContentStorageId".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || System
 +
|-
 +
| 1 || User
 +
|-
 +
| 2 || SdCard
 +
|}
 +
 
 +
= SaveDataSpaceId =
 +
This is "nn::fs::SaveDataSpaceId".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || System
 +
|-
 +
| 1 || User
 +
|-
 +
| 2 || SdSystem
 +
|-
 +
| 3 || [3.0.0+] Temporary
 +
|-
 +
| 4 || [4.0.0+] SdUser
 +
|-
 +
| 100 || [3.0.0+] ProperSystem
 +
|-
 +
| 101 || [3.0.0+] SafeMode
 +
|}
 +
 
 +
Determines the storage where the savedata is stored.
 +
 
 +
= SaveDataType =
 +
This is "nn::fs::SaveDataType".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || System
 +
|-
 +
| 1 || Account
 +
|-
 +
| 2 || Bcat
 +
|-
 +
| 3 || Device
 +
|-
 +
| 4 || [3.0.0+] Temporary
 +
|-
 +
| 5 || [3.0.0+] Cache
 +
|-
 +
| 6 || [4.0.0+] SystemBcat
 +
|}
 +
 
 +
= SaveDataRank =
 +
This is "nn::fs::SaveDataRank".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Primary
 +
|-
 +
| 1 || Secondary
 +
|}
 +
 
 +
= SaveDataEnumerateOption =
 +
This is "nn::fs::SaveDataEnumerateOption".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 1 || AllRank
 +
|}
 +
 
 +
= SaveDataFlags =
 +
This is "nn::fs::SaveDataFlags".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 1 || KeepAfterResettingSystemSaveData
 +
|-
 +
| 2 || KeepAfterRefurbishment
 +
|-
 +
| 4 || KeepAfterResettingSystemSaveDataWithoutUserSaveData
 +
|-
 +
| 8 || NeedsSecureDelete
 +
|}
 +
 
 +
= SaveDataMetaType =
 +
This is "nn::fs::SaveDataMetaType".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || None
 +
|-
 +
| 1 || Thumbnail
 +
|-
 +
| 2 || ExtensionContext
 +
|}
 +
 
 +
= ImageDirectoryId =
 +
This is "nn::fs::ImageDirectoryId".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Nand
 +
|-
 +
| 1 || SdCard
 +
|}
 +
 
 +
= CloudBackupWorkStorageId =
 +
This is "nn::fs::CloudBackupWorkStorageId".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Nand
 +
|-
 +
| 1 || SdCard
 +
|}
 +
 
 +
= CustomStorageId =
 +
This is "nn::fs::CustomStorageId".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || System
 +
|-
 +
| 1 || SdCard
 +
|}
 +
 
 +
= Priority =
 +
This is "nn::fs::Priority".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Realtime
 +
|-
 +
| 1 || Normal
 +
|-
 +
| 2 || Low
 +
|}
 +
 
 +
= PriorityRaw =
 +
This is "nn::fs::PriorityRaw".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Realtime
 +
|-
 +
| 1 || Normal
 +
|-
 +
| 2 || Low
 +
|-
 +
| 3 || Background
 +
|}
 +
 
 +
= AbortSpecifier =
 +
This is "nn::fs::AbortSpecifier".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Default
 +
|-
 +
| 1 || Abort
 +
|-
 +
| 2 || ReturnResult
 +
|}
 +
 
 +
= OperationId =
 +
This is "nn::fs::OperationId".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Clear
 +
|-
 +
| 1 || ClearSignature
 +
|-
 +
| 2 || InvalidateCache
 +
|-
 +
| 3 || QueryRange
 +
|}
 +
 
 +
= MountHostOption =
 +
This is "nn::fs::MountHostOption".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 1 || PseudoCaseSensitive
 +
|}
 +
 
 +
= BisPartitionId =
 +
This is "nn::fs::BisPartitionId".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || BootPartition1Root
 +
|-
 +
| 10 || BootPartition2Root
 +
|-
 +
| 20 || UserDataRoot
 +
|-
 +
| 21 || BootConfigAndPackage2Part1
 
|-
 
|-
 
| 22 || BootConfigAndPackage2Part2
 
| 22 || BootConfigAndPackage2Part2
|-
+
|-
| 23 || BootConfigAndPackage2Part3
+
| 23 || BootConfigAndPackage2Part3
|-
+
|-
| 24 || BootConfigAndPackage2Part4
+
| 24 || BootConfigAndPackage2Part4
|-
+
|-
| 25 || BootConfigAndPackage2Part5
+
| 25 || BootConfigAndPackage2Part5
|-
+
|-
| 26 || BootConfigAndPackage2Part6
+
| 26 || BootConfigAndPackage2Part6
|-
+
|-
| 27 || CalibrationBinary
+
| 27 || CalibrationBinary
|-
+
|-
| 28 || CalibrationFile
+
| 28 || CalibrationFile
|-
+
|-
| 29 || SafeMode
+
| 29 || SafeMode
|-
+
|-
| 30 || User
+
| 30 || User
|-
+
|-
| 31 || System
+
| 31 || System
|-
+
|-
| 32 || SystemProperEncryption
+
| 32 || SystemProperEncryption
|-
+
|-
| 33 || SystemProperPartition
+
| 33 || SystemProperPartition
|-
+
|-
| 34 || SignedSystemPartitionOnSafeMode
+
| 34 || SignedSystemPartitionOnSafeMode
 +
|}
 +
 
 +
= SdCardSpeedMode =
 +
This is "nn::fs::SdCardSpeedMode".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Identification
 +
|-
 +
| 1 || DefaultSpeed
 +
|-
 +
| 2 || HighSpeed
 +
|-
 +
| 3 || Sdr12
 +
|-
 +
| 4 || Sdr25
 +
|-
 +
| 5 || Sdr50
 +
|-
 +
| 6 || Sdr104
 +
|-
 +
| 7 || Ddr50
 +
|-
 +
| 8 || Unknown
 +
|}
 +
 
 +
= MmcSpeedMode =
 +
This is "nn::fs::MmcSpeedMode".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Identification
 +
|-
 +
| 1 || LegacySpeed
 +
|-
 +
| 2 || HighSpeed
 +
|-
 +
| 3 || Hs200
 +
|-
 +
| 4 || Hs400
 +
|-
 +
| 5 || Unknown
 +
|}
 +
 
 +
= MmcPartition =
 +
This is "nn::fs::MmcPartition".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || UserData
 +
|-
 +
| 1 || BootPartition1
 +
|-
 +
| 2 || BootPartition2
 +
|}
 +
 
 +
= StorageErrorInfo =
 +
This is "nn::fs::StorageErrorInfo".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0
 +
| 0x4
 +
| NumActivationFailures
 +
|-
 +
| 0x4
 +
| 0x4
 +
| NumActivationErrorCorrections
 +
|-
 +
| 0x8
 +
| 0x4
 +
| NumReadWriteFailures
 +
|-
 +
| 0xC
 +
| 0x4
 +
| NumReadWriteErrorCorrections
 +
|}
 +
 
 +
= GameCardErrorInfo =
 +
This is "nn::fs::GameCardErrorInfo".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Offset
 +
! Size
 +
! Description
 +
|-
 +
| 0x0
 +
| 0x4
 +
| GameCardCrcErrorNum
 +
|-
 +
| 0x4
 +
| 0x4
 +
| AsicCrcErrorNum
 +
|-
 +
| 0x8
 +
| 0x4
 +
| RefreshNum
 +
|-
 +
| 0xC
 +
| 0x4
 +
| RetryLimitOutNum
 +
|}
 +
 
 +
= GameCardErrorReportInfo =
 +
This is "nn::fs::GameCardErrorReportInfo". This is a 0x40-byte struct.
 +
 
 +
= GameCardHandle =
 +
This is "nn::fs::GameCardHandle". This is an u32.
 +
 
 +
= GameCardPartition =
 +
This is "nn::fs::GameCardPartition".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || Update
 +
|-
 +
| 1 || Normal
 +
|-
 +
| 2 || Secure
 +
|-
 +
| 3 || [4.0.0+] Logo
 +
|}
 +
 
 +
= GameCardPartitionRaw =
 +
This is "nn::fs::GameCardPartitionRaw".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 0 || NormalReadOnly
 +
|-
 +
| 1 || SecureReadOnly
 +
|-
 +
| 2 || RootWriteOnly
 +
|}
 +
 
 +
= GameCardAttribute =
 +
This is "nn::fs::GameCardAttribute".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 1 || AutoBootFlag
 +
|-
 +
| 2 || HistoryEraseFlag
 +
|-
 +
| 4 || [4.0.0+] RepairToolFlag
 +
|-
 +
| 8 || [9.0.0+] DifferentRegionCupToTerraDeviceFlag
 +
|-
 +
| 16 || [9.0.0+] DifferentRegionCupToGlobalDeviceFlag
 +
|}
 +
 
 +
= GameCardSize =
 +
This is "nn::fs::GameCardSize".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 1 || Size1GB
 +
|-
 +
| 2 || Size2GB
 +
|-
 +
| 4 || Size4GB
 +
|-
 +
| 8 || Size8GB
 +
|-
 +
| 16 || Size16GB
 +
|-
 +
| 32 || Size32GB
 +
|}
 +
 
 +
= GameCardClockRate =
 +
This is "nn::fs::GameCardClockRate".
 +
 
 +
{| class="wikitable" border="1"
 +
|-
 +
! Value || Name
 +
|-
 +
| 25 || ClockRate25MHz
 +
|-
 +
| 50 || ClockRate50MHz
 
|}
 
|}
   −
= MmcSpeedMode =
+
= GameCardCompatibilityType =
This is "nn::fs::MmcSpeedMode".
+
This is "nn::fs::GameCardCompatibilityType".
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
Line 1,816: Line 2,736:  
! Value || Name
 
! Value || Name
 
|-
 
|-
| 0 || Identification
+
| 0 || Global
|-
  −
| 1 || LegacySpeed
  −
|-
  −
| 2 || HighSpeed
  −
|-
  −
| 3 || Hs200
  −
|-
  −
| 4 || Hs400
   
|-
 
|-
| 5 || Unknown
+
| 1 || China
 
|}
 
|}
   −
= MmcPartition =
+
= GameCardUpdatePartitionInfo =
This is "nn::fs::MmcPartition".
+
This is "nn::fs::GameCardUpdatePartitionInfo".
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Offset
 +
! Size
 +
! Description
 
|-
 
|-
| 0 || UserData
+
| 0x0
 +
| 0x4
 +
| Version
 
|-
 
|-
| 1 || BootPartition1
+
| 0x4
 +
| 0x4
 +
| Reserved
 
|-
 
|-
| 2 || BootPartition2
+
| 0x8
 +
| 0x8
 +
| Id
 
|}
 
|}
   −
= GameCardPartition =
+
= CardId1 =
This is "nn::fs::GameCardPartition".
+
This is "nn::gc::detail::CardId1".
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Offset
 +
! Size
 +
! Description
 
|-
 
|-
| 0 || Update
+
| 0x0
 +
| 0x1
 +
| MakerCode
 
|-
 
|-
| 1 || Normal
+
| 0x1
 +
| 0x1
 +
| MemoryCapacity
 
|-
 
|-
| 2 || Secure
+
| 0x2
 +
| 0x1
 +
| Reserved
 
|-
 
|-
| 3 || [4.0.0+] Logo
+
| 0x3
 +
| 0x1
 +
| MemoryType
 
|}
 
|}
   −
= GameCardPartitionRaw =
+
= CardId2 =
This is "nn::fs::GameCardPartitionRaw".
+
This is "nn::gc::detail::CardId2".
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Offset
 +
! Size
 +
! Description
 
|-
 
|-
| 0 || NormalReadOnly
+
| 0x0
 +
| 0x1
 +
| CardSecurityNumber
 
|-
 
|-
| 1 || SecureReadOnly
+
| 0x1
 +
| 0x1
 +
| CardType
 
|-
 
|-
| 2 || RootWriteOnly
+
| 0x2
 +
| 0x2
 +
| Reserved
 
|}
 
|}
   −
= GameCardAttribute =
+
= CardId3 =
This is "nn::fs::GameCardAttribute".
+
This is "nn::gc::detail::CardId3".
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Offset
|-
+
! Size
| 1 || AutoBootFlag
+
! Description
|-
  −
| 2 || HistoryEraseFlag
  −
|-
  −
| 4 || [4.0.0+] RepairToolFlag
  −
|-
  −
| 8 || [9.0.0+] DifferentRegionCupToTerraDeviceFlag
   
|-
 
|-
| 16 || [9.0.0+] DifferentRegionCupToGlobalDeviceFlag
+
| 0x0
 +
| 0x4
 +
| Reserved
 
|}
 
|}
   −
= GameCardSize =
+
= GameCardIdSet =
This is "nn::fs::GameCardSize".
+
This is "nn::gc::GameCardIdSet".
    
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
|-
 
|-
! Value || Name
+
! Offset
|-
+
! Size
| 1 || Size1GB
+
! Description
|-
  −
| 2 || Size2GB
  −
|-
  −
| 4 || Size4GB
   
|-
 
|-
| 8 || Size8GB
+
| 0x0
 +
| 0x4
 +
| [[#CardId1|Id1]]
 
|-
 
|-
| 16 || Size16GB
+
| 0x4
 +
| 0x4
 +
| [[#CardId2|Id2]]
 
|-
 
|-
| 32 || Size32GB
+
| 0x8
 +
| 0x4
 +
| [[#CardId3|Id3]]
 
|}
 
|}
   −
= GameCardClockRate =
+
= RmaInformation =
This is "nn::fs::GameCardClockRate".
+
This is "nn::gc::RmaInformation". This is a 0x200-byte struct.
 
  −
{| class="wikitable" border="1"
  −
|-
  −
! Value || Name
  −
|-
  −
| 25 || ClockRate25MHz
  −
|-
  −
| 50 || ClockRate50MHz
  −
|}
      
= SimulatingDeviceType =
 
= SimulatingDeviceType =