Bus services

From Nintendo Switch Brew
Revision as of 23:11, 28 April 2018 by Shinyquagsire23 (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

gpio

This is "nn::gpio::IManager".

Cmd Name
0 #OpenSessionForDev
1 #OpenSession
2 #OpenSessionForTest
3 IsWakeEventActive
4 GetWakeEventActiveFlagSet
5 SetWakeEventActiveFlagSetForDebug
6 SetWakePinDebugMode
7 [5.0.0+] #OpenSession2
8 [5.0.0+] IsWakeEventActive2
9 [5.0.0+] SetWakeEventActiveFlagSetForDebug2

OpenSessionForDev

Takes a raw GpioPadDescriptor and returns a #IPadSession session for it.

OpenSession

Same thing as OpenSessionForDev except the descriptor is looked up in the table below. Returns an #IPadSession session.

GpioPadName GpioPadDescriptor Tegra (port, pin) Usage Direction Used by
0x01 0xCC Z, 4 rt5639 power Out Audio services, Fatal services
0x02 0x24 E, 4 SDCard Power Out Filesystem services
0x03 0x3C H, 4 BT_RST_PH4 Out Bluetooth services
0x04 0xDA BB, 2
0x05 0xDB BB, 3 GcAsic Power Out Filesystem services
0x06 0xDC BB, 4 Headphone Detect In Audio services
0x07 0x25 E, 5
0x08 0x90 S, 0 DebugPadDriver In HID services
0x09 0x91 S, 1
0x0A 0x96 S, 6 bq24192 Charge Enable Out PTM services
0x0B 0x97 S, 7
0x0C 0x26 E, 6 joycon(L) NwcpDriver0.GpioMonitorTask0 (insertion, Joy-Con pin 5/console TX, pulled low on insert?) In HID services
0x0D 0x05 A, 5 Fan enable (normal) Out PTM services
0x0E 0x78 P, 0 SDMMC3_CLK_PP0?
0x0F 0x93 S, 3 GcAsic irq In Filesystem services
0x10 0x7D P, 5 SDMMC3_DAT0_PP5?
0x11 0x7C P, 4 SDMMC3_DAT1_PP4?
0x12 0x7B P, 3 SDMMC3_DAT2_PP3?
0x13 0x7A P, 2 SDMMC3_DAT3_PP2?
0x14 0xBC X, 4
0x15 0xAE V, 6 In Audio services
0x16 0xBA X, 2 MOTION_INT_PX2?
0x17 0xB9 X, 1 Touchscreen irq (TOUCH_INT_PX1) (unused - polled instead) In HID services
0x18 0xBD X, 5 Power Button (BUTTON_POWER_ON_PX5) In
0x19 0xBE X, 6 Volume Up (BUTTON_VOL_UP_PX6) In Boot2, Audio services
0x1A 0xBF X, 7 Volume Down (BUTTON_VOL_DOWN_PX7) In Boot2, Audio services
0x1B 0xC0 Y, 0 max17050 irq In PTM services
0x1C 0xC1 Y, 1 BUTTON_HOME_PY1 In
0x1D 0xA9 V, 1 Backlight (LCD_BL_EN_PV1) Out NV services, Backlight services
0x1E 0xAA V, 2 Backlight (LCD_RST_PV2) Out NV services
0x1F 0x55 K, 5 bq24192 OTG charge select Out PTM services, USB services
0x20 0xAD V, 5 PD related Out USB services
0x21 0xC8 Z, 0 bq24192 irq In PTM services
0x22 0xCA Z, 2
0x23 0xCB Z, 3
0x24 0x4F J, 7 Touchscreen reset Out HID services
0x25 0x50 K, 0
0x26 0x51 K, 1
0x27 0x52 K, 2
0x28 0x54 K, 4 bm92t36 irq In USB services
0x29 0x56 K, 6
0x2A 0x57 K, 7
0x2B 0x53 K, 3 joycon(R) NwcpDriver1.NwcpCharger Out HID services
0x2C 0xE3 CC, 3 joycon(L) NwcpDriver0.NwcpCharger Out HID services
0x2D 0x38 H, 0 WIFI_EN_PH0?
0x2E 0x39 H, 1 WIFI_RST_PH1 Out Wlan services, PCIe services
0x2F 0x3B H, 3 AP_WAKE_BT_PH3 Out Bluetooth services
0x30 0x3D H, 5
0x31 0x3F H, 7
0x32 0x40 I, 0 Backlight +5V Out NV services
0x33 0x41 I, 1 Backlight -5V Out NV services
0x34 0x3E H, 6 joycon(R) NwcpDriver1.GpioMonitorTask0 (insertion, Joy-Con pin 5/console TX, pulled low on insert?) In HID services
0x35 0xE2 CC, 2
0x36 0xE4 CC, 4 Fan enable (high power) Out PTM services
0x37 0x3A H, 2
0x38 0xC9 Z, 1 SDCard Card Detect In Filesystem services
0x39 0x4D J, 5 bq24192 OTG charge select Out PTM services, USB services
0x3A 0x58 L, 0 bq24192 OTG charge select Out PTM services, USB services
0x3B 0x3E H, 6 joycon(R) NwcpDriver1.GpioMonitorTask0 duplicate?
0x3C 0x26 E, 6 joycon(L) NwcpDriver1.GpioMonitorTask0 duplicate?
0x3D -1
0x3E 0x33 G, 3 joycon(R) NwcpDriver1.GpioMonitorTask1 (CTS, checked low) In HID services
0x3F 0x1C D, 4 joycon(L) NwcpDriver0.GpioMonitorTask1 (CTS, checked low) In HID services
0x40 0xD9 BB, 1
0x41 0x0C B, 4 Lid Closed (unused)
0x42 0x0D B, 5
0x43 0x21 E, 1 USB power Out USB services
0x44 0x27 E, 7
0x45 0x92 S, 2
0x46 0x95 S, 5 USB root port 4 power Out USB services
0x47 0x98 T, 0 USB root port 3 power Out USB services
0x48 0x10 C, 0 HdmiHotplug Out NV services
0x49 0x11 C, 1 USB root port 2 power Out USB services
0x4A 0x12 C, 2 HdmiHotplug Out NV services
0x4B 0x42 I, 2
0x4C 0xE6 CC, 6
-- 0xE1 CC, 1 HdmiHotplug (HDMI_INT_DP_HPD_PCC1) In NV services

OpenSessionForTest

Same as #OpenSession but panics on failure.

OpenSession2

Same as #OpenSession but takes a DeviceCode instead of a GpioPadName.

IPadSession

This is "nn::gpio::IPadSession".

Cmd Name
0 SetDirection
1 GetDirection
2 SetInterruptMode
3 GetInterruptMode
4 SetInterruptEnable
5 GetInterruptEnable
6 GetInterruptStatus
7 ClearInterruptStatus
8 SetValue
9 GetValue
10 BindInterrupt
11 UnbindInterrupt
12 SetDebounceEnabled
13 GetDebounceEnabled
14 SetDebounceTime
15 GetDebounceTime
16 [4.0.0+] SetValueForSleepState

GpioPadDescriptor

Bits Description
7-5 Controller index
4-3 Port index
2-0 Pin number

i2c, i2c:pcv

This is "nn::i2c::IManager".

Cmd Name
0 OpenSessionForDev
1 OpenSession
2 HasDevice
3 HasDeviceForDev

Known Devices

Name Port:Addr 10bit? Speed Max Retries Retry Delay Usage Used by
0 0:52 N 100000 0 0 DebugPadDriver HID services
1 2:49 N 400000 0 0 STM touchscreen HID services
2 0:4c N 100000 0 0 TI Temperature Sensor (tmp451) PTM services
3 0:4c N 100000 0 0 duplicate, unused entry?
4 0:1c N 100000 0 0 Audio codec (rt5639) Audio services, Fatal services
5 4:68 N 400000 3 5000000 max77620_rtc0, max77620_irq0 PCV services
6 4:3c N 400000 3 5000000 PMIC (max77620), max77620_irq0 PCV services
7 4:1b N 400000 3 5000000 max77621_cpu PCV services
8 4:1c N 400000 3 5000000 max77621_gpu PCV services
9 0:6b N 100000 3 5000000 TI Charger (bq24192) PTM services
10 0:36 N 100000 3 5000000 Maxim Fuel Gauge (max17050) PCV services, PTM services
11 0:18 N 100000 3 5000000 USB-PD controller (rohm bm92t36) USB services
12 1:40 N 400000 3 5000000
13 1:41 N 400000 3 5000000
14 1:44 N 400000 3 5000000
15 1:45 N 400000 3 5000000
16 1:46 N 400000 3 5000000
17 1:47 N 400000 3 5000000
18 1:29 N 400000 3 5000000 rohm ambient light sensor (bh1730fvc) Backlight services
19 1:48 N 400000 3 5000000
20 1:49 N 400000 3 5000000
21 1:4a N 400000 3 5000000
22 1:4b N 400000 3 5000000
23 1:4d N 400000 3 5000000
24 3:50 N 100000 0 0 DisplayHdmiHotplugHandler NV services
25 3:54 N 100000 0 0 DisplayHdmiHotplugHandler NV services
26 3:3a N 100000 0 0 DisplayHdmiHotplugHandler NV services

This table is believed to be complete - entries with empty "Used by" column haven't been seen being used (devices not present on switch?).

II2cSession

This is "nn::i2c::ISession".

Cmd Name
0 Send
1 Receive
2 ExecuteCommandList
10 SendAuto
11 ReceiveAuto
12 ExecuteCommandListAuto

uart

This is "nn::uart::IManager".

Cmd Name
0 DoesUartExist
1 DoesUartExistForTest
2 SetUartBaudrate
3 SetUartBaudrateForTest
4 IsSomethingUartValid
5 IsSomethingUartValidForTest
6 GetSession
7 IsSomethingUartValid2
8 IsSomethingUartValid2ForTest

IPortSession

This is "nn::uart::IPortSession".

Cmd Name Notes
0 OpenSession Takes marshalled arguments
1 OpenSessionForTest Takes marshalled arguments
2
3 Takes marshalled arguments
4 Returns 2x u64. Both zero.
5
6
7

Port Mapping

OpenSession translates user IDs to to the uart port index.

OpenSessionForTest takes the port index verbatim.

Name Port Usage
1 UART-D Bluetooth
2 UART-B Joycon(R)
3 UART-C Joycon(L)

pwm

This is "nn::pwm::IManager".

Cmd Name
0 OpenSessionForDev
1 OpenSession

Known Channels

Name Interface Usage Used by
1 PWM Channel 1 Fan PTM services
2 PWM Channel 0 Backlight Backlight services, NV services
3 PMC Blinker

IChannelSession

This is "nn::pwm::IChannelSession".

Cmd Name
0 SetPeriod
1 GetPeriod
2 SetDuty
3 GetDuty
4 SetEnabled
5 GetEnabled

pinmux

This is "nn::pinmux::IManager".

Cmd Name
0 OpenSession

ISession

This is "nn::pinmux::ISession".

Cmd Name
0
1
2

sasbus

This is "nn::sasbus::IManager".

Cmd Name
0 OpenSession

ISession

This is "nn::sasbus::ISession".

Cmd Name
0
1
2
3
Retrieved from "https://switchbrew.org/w/index.php?title=Bus_services&oldid=4534"