Bus services

gpio

This is "nn::gpio::IManager".

Cmd	Name
0	#OpenSessionForDev
1	#OpenSession
2	#OpenSessionForTest
3	[1.0.0-6.2.0] #IsWakeEventActive
4	[1.0.0-6.2.0] GetWakeEventActiveFlagSet
5	[1.0.0-6.2.0] SetWakeEventActiveFlagSetForDebug
6	#SetWakePinDebugMode
7	[5.0.0+] #OpenSession2
8	[5.0.0+] #IsWakeEventActive2
9	[5.0.0+] SetWakeEventActiveFlagSetForDebug2
10	[6.0.0+] #SetRetryValues

OpenSessionForDev

Takes a raw #GpioPadDescriptor and returns an #IPadSession.

OpenSession

Same as #OpenSessionForDev except it takes a #GpioPadName which is then converted to a #GpioPadDescriptor. Returns an #IPadSession.

OpenSessionForTest

Same as #OpenSession but panics on failure.

IsWakeEventActive

Takes a #GpioPadName and returns a bool.

SetWakePinDebugMode

Takes an u32 WakePinDebugMode. No output.

OpenSession2

Same as #OpenSession but takes a DeviceCode and an input u32 #AccessMode.

IsWakeEventActive2

Same as #IsWakeEventActive but takes a DeviceCode.

SetRetryValues

Stubbed. Returns 0.

IPadSession

This is "nn::gpio::IPadSession".

Cmd	Name
0	SetDirection
1	GetDirection
2	SetInterruptMode
3	GetInterruptMode
4	SetInterruptEnable
5	GetInterruptEnable
6	GetInterruptStatus
7	ClearInterruptStatus
8	SetValue
9	GetValue
10	BindInterrupt
11	UnbindInterrupt
12	SetDebounceEnabled
13	GetDebounceEnabled
14	SetDebounceTime
15	GetDebounceTime
16	[4.0.0+] SetValueForSleepState
17	[6.0.0+] GetValueForSleepState

i2c, i2c:pcv

This is "nn::i2c::IManager".

Cmd	Name
0	OpenSessionForDev
1	OpenSession
2	[1.0.0-5.1.0] HasDevice
3	[1.0.0-5.1.0] HasDeviceForDev
4	[6.0.0+] OpenSession2

OpenSessionForDev

Takes an input u32 BusIdx, an input u16 SlaveAddress, and 2 input u32s #AddressingMode and #SpeedMode. Returns an #II2cSession.

OpenSession

Takes an input u32 #I2cDevice. Returns an output #II2cSession.

HasDevice

Takes an input u32 #I2cDevice. Returns an output boolean success value.

HasDeviceForDev

Takes an input u32 BusIdx, an input u16 SlaveAddress, and 2 input u32s #AddressingMode and #SpeedMode. Returns an output boolean success value.

OpenSession2

Same as OpenSession but takes an input u32 DeviceCode.

II2cSession

This is "nn::i2c::ISession".

Cmd	Name
0	[1.0.0-5.1.0] SendOld
1	[1.0.0-5.1.0] ReceiveOld
2	[1.0.0-5.1.0] ExecuteCommandListOld
10	#Send
11	#Receive
12	#ExecuteCommandList
13	[6.0.0+] #SetRetryPolicy

Send

Takes a type-0x21 input buffer InData and an input u32 #TransactionOption. No output.

Receive

Takes a type-0x22 output buffer OutData and an input u32 #TransactionOption. No output.

ExecuteCommandList

Takes a type-0x22 output buffer ReceiveBuffer and a type-0x9 input buffer CommandList. No output.

Commands

This is "nn::i2c::I2cCommand".

Bits	Name
0-5	#CommandId
6-7	#TransactionOption

A send command will write bytes to the device using the format: [u8 cmd_send] [u8 len] <bytes>

A receive command will read bytes from the device using the format: [u8 cmd_receive] [u8 len]

An extension sleep command will stall the device using the format: [u8 cmd_extension] [u8 ms]

SetRetryPolicy

Takes 2 input u32s MaxRetries and RetryIntervalMicroSeconds. No output.

uart

This is "nn::uart::IManager".

Cmd	Name
0	#HasPort
1	#HasPortForDev
2	#IsSupportedBaudRate
3	#IsSupportedBaudRateForDev
4	#IsSupportedFlowControlMode
5	#IsSupportedFlowControlModeForDev
6	#CreatePortSession
7	#IsSupportedPortEvent
8	#IsSupportedPortEventForDev
9	[7.0.0+] #IsSupportedDeviceVariation
10	[7.0.0+] #IsSupportedDeviceVariationForDev

HasPort

Takes an input #UartPort. Returns an output boolean success value.

HasPortForDev

Takes an input #UartPortForDev. Returns an output boolean success value.

IsSupportedBaudRate

Takes 2 input u32s #UartPort and BaudRate. Returns an output boolean success value.

Supported baud rates are 57600, 115200, 1000000 and 3000000.

IsSupportedBaudRateForDev

Takes 2 input u32s #UartPortForDev BaudRate. Returns an output boolean success value.

Supported baud rates are 57600, 115200, 1000000 and 3000000.

IsSupportedFlowControlMode

Takes 2 input u32s #UartPort and #FlowControlMode. Returns an output boolean success value.

IsSupportedFlowControlModeForDev

Takes 2 input u32s #UartPortForDev and #FlowControlMode. Returns an output boolean success value.

CreatePortSession

No input. Returns an output #IPortSession.

IsSupportedPortEvent

Takes 2 input u32s #UartPort and #PortEventType. Returns an output boolean success value.

IsSupportedPortEventForDev

Takes 2 input u32s #UartPortForDev and #PortEventType. Returns an output boolean success value.

IsSupportedDeviceVariation

Takes 2 input u32s #UartPort and DeviceVariation. Returns an output boolean success value.

Supported device variations are 0 (Bluetooth) for UART-D, 0 (Joy-Con(R)) for UART-B, 0 (Joy-Con(L)) and 1 (SioMcu) for UART-C.

IsSupportedDeviceVariationForDev

Takes 2 input u32s #UartPortForDev and DeviceVariation. Returns an output boolean success value.

Supported device variations are 0 (Bluetooth) for UART-D, 0 (Joy-Con(R)) for UART-B, 0 (Joy-Con(L)) and 1 (SioMcu) for UART-C.

IPortSession

This is "nn::uart::IPortSession".

Cmd	Name
0	#OpenPort
1	#OpenPortForDev
2	#GetWritableLength
3	#Send
4	#GetReadableLength
5	#Receive
6	#BindPortEvent
7	#UnbindPortEvent

OpenPort

Takes 3 input u32s #UartPort, BaudRate and #FlowControlMode, 2 input u64s SendBufferLength and ReceiveBufferLength and 2 input TransferMemory handles SendHandle and ReceiveHandle. Returns an output boolean success value.

[6.0.0+] Takes 4 input u8s (padded as u32) IsInvertTx, IsInvertRx, IsInvertRts and IsInvertCts, 3 input u32s #UartPort, BaudRate and #FlowControlMode, 2 input u64s SendBufferLength and ReceiveBufferLength and 2 input TransferMemory handles SendHandle and ReceiveHandle. Returns an output boolean success value.

[7.0.0+] Takes 4 input u8s (padded as u32) IsInvertTx, IsInvertRx, IsInvertRts and IsInvertCts, 4 input u32s #UartPort, BaudRate, #FlowControlMode and DeviceVariation, 2 input u64s SendBufferLength and ReceiveBufferLength and 2 input TransferMemory handles SendHandle and ReceiveHandle. Returns an output boolean success value.

This will Abort when the specified #UartPort is already being used, due to a SVC failing.

OpenPortForDev

Same as #OpenPort, but takes an input #UartPortForDev instead.

GetWritableLength

No input. Returns an output u64 WritableLength.

Send

Takes a type-0x21 input buffer InData. Returns an output u64 size.

GetReadableLength

No input. Returns an output u64 ReadableLength.

Receive

Takes a type-0x22 output buffer OutData. Returns an output u64 size.

BindPortEvent

Takes an input u32 #PortEventType and an input s64 Threshold. Returns an output boolean success value and an Event handle with EventClearMode=0.

UnbindPortEvent

Takes an input u32 #PortEventType. Returns an output boolean success value.

pwm

This is "nn::pwm::IManager".

Cmd	Name
0	OpenSessionForDev
1	OpenSession
2	[6.0.0+] OpenSession2

OpenSession2

Takes a DeviceCode and returns an #IChannelSession.

IChannelSession

This is "nn::pwm::IChannelSession".

Cmd	Name
0	SetPeriod
1	GetPeriod
2	SetDuty
3	GetDuty
4	SetEnabled
5	GetEnabled
6	[6.0.0+] SetScale
7	[6.0.0+] GetScale

pinmux

This is "nn::pinmux::IManager".

Cmd	Name
0	OpenSession

OpenSession

Takes an #AssignablePinGroupName or an #AssignablePinGroupNameForHardwareTest and returns an ISession.

ISession

This is "nn::pinmux::ISession".

Cmd	Name
0	#SetPinAssignment
1	#GetPinAssignment
2	#SetPinAssignmentForHardwareTest

SetPinAssignment

Takes a #PinAssignment. No output.

GetPinAssignment

No input. Returns a #PinAssignment.

SetPinAssignmentForHardwareTest

Takes a #PinAssignmentForHardwareTest. No output.

sasbus

This is "nn::sasbus::IManager".

This was added with [3.0.0+].

Cmd	Name
0	OpenSession

OpenSession

Takes a #SasbusPort and returns an ISession.

ISession

This is "nn::sasbus::ISession".

Cmd	Name
0	#Write
1	#Read
2	#StartPeriodicReceiveMode
3	#StopPeriodicReceiveMode

Write

Takes a type-0x21 input buffer and an u8 SpiCommand. No output.

Read

Takes a type-0x22 output buffer and an u8 SpiCommand. No output.

StartPeriodicReceiveMode

Takes an u8 SpiCommand (padded to u32), an u32, two u64s and a copy handle. No output.

StopPeriodicReceiveMode

No input/output.

led

This is "nn::led::detail::IManager".

This was added with [8.1.1+].

Cmd	Name
0	#OpenController

OpenController

Takes a DeviceCode (which must be 0x35000065) and returns an #IController session for it.

IController

This is "nn::led::detail::IController".

This was added with [8.1.1+].

Cmd	Name
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21	[8.1.1-9.2.0]

GpioPadName

This is "nn::gpio::GpioPadName".

Value	Name	GpioPadDescriptor	DeviceCode	Tegra (port, pin)	Description	Direction	Used by (services)	Used by (hardware)
0x01	CodecLdoEnTemp	0xCC	0x33000002	Z, 4	Audio Codec (ALC5639) Power	Out	Audio services, Fatal services	Icosa, Hoag, Iowa, Aula
0x02	PowSdEn	0x24	0x3C000001	E, 4	SdCard Power	Out	PCV services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x03	BtRst	0x3C	0x37000002	H, 4	Bluetooth Reset	Out	Bluetooth Driver services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x04	RamCode3	0xDA	0xC9000402	BB, 2	Secondary Boot Device Configration	In		Icosa, Iowa
0x05	GameCardReset	0xDB	0x3C000402	BB, 3	Gamecard Reset	Out	Filesystem services	Icosa, Copper, Hoag, Iowa, Aula
0x06	CodecAlert	0xDC	0x33000003	BB, 4	Audio Codec (ALC5639) Alert	In	Audio services	Icosa, Hoag, Iowa, Aula
0x07	PowGc	0x25	0x3C000401	E, 5	Gamecard Power	Out		Icosa, Copper
0x08	DebugControllerDet	0x90	0x350000CA	S, 0	Debug Pad Detect	In	HID services	Icosa, Iowa
0x09	BattChgStatus	0x91	0x39000407	S, 1	Battery Charge Status	In		Icosa, Hoag, Iowa, Aula
0x0A	BattChgEnableN	0x96	0x39000003	S, 6	Charger IC (BQ24193) Charge Enable	Out	PTM services	Icosa, Hoag, Iowa, Aula
0x0B	FanTach	0x97	0x3D000002	S, 7	Fan Tachometer	In		Icosa, Hoag, Iowa, Calcio, Aula
0x0C	ExtconDetS	0x26	0x3500040B	E, 6	Joy-Con(L) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert)	In	HID services, AM services	Icosa, Iowa, Aula
0x0D	Vdd50AEn	0x05	0x39000401	A, 5	Fan and Joy-Con Rails Power (Battery - BQ24193 5V)	Out	PTM services	Icosa, Hoag, Iowa, Aula
0x0E	SdevCoaxSel1	0x78	0xCA000402	P, 0	SDEV Coax Select	In		Icosa, Iowa
0x0F	GameCardCd	0x93	0x3C000403	S, 3	Gamecard Card Detect	In	Filesystem services, AM services	Icosa, Copper, Hoag, Iowa, Aula
0x10	ProdType0	0x7D	0xC900040B	P, 5		In		Icosa, Copper, Iowa
0x11	ProdType1	0x7C	0xC900040C	P, 4		In		Icosa, Copper, Iowa
0x12	ProdType2	0x7B	0xC900040D	P, 3		In		Icosa, Copper, Iowa
0x13	ProdType3	0x7A	0xC900040E	P, 2		In		Icosa, Copper, Iowa
0x14	TempAlert	0xBC	0x3E000002	X, 4	Temperature Sensor	In		Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x15	CodecHpDetIrq	0xAE	0x33000004	V, 6	Audio Codec (ALC5639) Headphone Detect	In	Audio services	Icosa, Hoag, Iowa, Aula
0x16	MotionInt	0xBA	0x35000041	X, 2		In		Icosa, Hoag, Iowa, Aula
0x17	TpIrq	0xB9	0x35000036	X, 1	TouchPanel IRQ	In	HID services	Icosa, Hoag, Iowa, Aula
0x18	ButtonSleep2	0xBD	0x35000001	X, 5	Power Button	In		Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x19	ButtonVolUp	0xBE	0x35000002	X, 6	Volume Up	In	Boot2, Audio services, Fatal services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x1A	ButtonVolDn	0xBF	0x35000003	X, 7	Volume Down	In	Boot2, Audio services	Icosa, Copper, Hoag, Iowa, Calcio , Aula
0x1B	BattMgicIrq	0xC0	0x39000034	Y, 0	Fuel Gauge IC (MAX17050) IRQ	In	PTM services, AM services	Icosa, Hoag, Iowa, Aula
0x1C	RecoveryKey	0xC1	0x35000004	Y, 1	Recovery Mode Key	In		Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x1D	PowLcdBlEn	0xA9	0x3400003E	V, 1	Backlight Enable	Out	NV services, Backlight services	Icosa, Hoag, Iowa
0x1E	LcdReset	0xAA	0x34000033	V, 2	Backlight Reset	Out	NV services	Icosa, Hoag, Iowa, Aula
0x1F	PdVconnEn	0x55	0x040000CC	K, 5	USB-PD Controller (RHOM BM92T30MWV) VCONN Power	Out	PTM services, USB services	Icosa, Hoag, Iowa, Aula
0x20	PdRstN	0xAD	0x040000CA	V, 5	USB-PD Controller (RHOM BM92T30MWV) Reset	Out	USB services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x21	Bq24190Irq	0xC8	0x39000002	Z, 0	Charger IC (BQ24193) IRQ	In	PTM services, AM services	Icosa, Hoag, Iowa, Aula
0x22	SdevCoaxSel0	0xCA	0xCA000401	Z, 2	SDEV Coax Select	In		Icosa, Iowa
0x23	SdWp	0xCB	0x3C000003	Z, 3	SdCard Write Protect	In		Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x24	TpReset	0x4F	0x35000035	J, 7	TouchPanel Reset	Out	HID services	Icosa, Hoag, Iowa, Aula
0x25	BtGpio2	0x50	0x37000401	K, 0		In		Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x26	BtGpio3	0x51	0x37000402	K, 1		In		Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x27	BtGpio4	0x52	0x37000403	K, 2		In		Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x28	CradleIrq	0x54	0x040000CB	K, 4	USB-PD Controller (RHOM BM92T30MWV) IRQ	In	USB services, AM services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x29	PowVcpuInt	0x56	0x3E000003	K, 6		In		Icosa, Copper, Aula
0x2A	Max77621GpuInt	0x57	0x3E000004	K, 7		In		Icosa, Copper
0x2B	ExtconChgU	0x53	0x35000402	K, 3	Joy-Con(R) Charge	Out	HID services	Icosa, Iowa, Aula
0x2C	ExtconChgS	0xE3	0x3500040C	CC, 3	Joy-Con(L) Charge	Out	HID services	Icosa, Iowa, Aula
0x2D	WifiRfDisable	0x38	0x38000003	H, 0		Out		Icosa, Copper, Hoag, Iowa, Calcio
0x2E	WifiReset	0x39	0x38000002	H, 1	WiFi Reset	Out	WLAN services, PCIe services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x2F	ApWakeBt	0x3B	0x37000003	H, 3		Out	Bluetooth Driver services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x30	BtWakeAp	0x3D	0x37000004	H, 5		In	AM services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x31	BtGpio5	0x3F	0x37000404	H, 7		Out		Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x32	PowLcdVddPEn	0x40	0x34000034	I, 0	Backlight +5V	Out	NV services	Icosa, Hoag, Iowa
0x33	PowLcdVddNEn	0x41	0x34000035	I, 1	Backlight -5V	Out	NV services	Icosa, Hoag, Iowa
0x34	ExtconDetU	0x3E	0x35000401	H, 6	Joy-Con(R) IsAttached (insertion, Joy-Con pin 5/console TX, pulled low on insert)	In	HID services, AM services	Icosa, Iowa, Aula
0x35	RamCode2	0xE2	0xC9000401	CC, 2	Secondary Boot Device Configration	In		Icosa, Iowa
0x36	Vdd50BEn	0xE4	0x39000402	CC, 4	Fan and Joy-Con Rails Power (USB 5V)	Out	PTM services	Icosa, Iowa
0x37	WifiWakeHost	0x3A	0x38000004	H, 2		In	AM services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x38	SdCd	0xC9	0x3C000002	Z, 1	SdCard Card Detect	In	Filesystem services, AM services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
0x39	OtgFet1ForSdev	0x4D	0x39000404	J, 5	Charger IC (BQ24193) OTG Charge Select	Out	PTM services, USB services	Icosa, Iowa
0x3A	OtgFet2ForSdev	0x58	0x39000405	L, 0	Charger IC (BQ24193) OTG Charge Select	Out	PTM services, USB services	Icosa, Iowa
0x3B	ExtConWakeU	0x3E	0x35000403	H, 6	Joy-Con(R) Wake Detect	In		Icosa, Hoag, Iowa, Aula
0x3C	ExtConWakeS	0x26	0x3500040D	E, 6	Joy-Con(L) Wake Detect	In		Icosa, Hoag, Iowa, Aula
0x3D	PmuIrq	-1	0x39000406
0x3E	ExtUart2Cts	0x33	0x35000404	G, 3	Joy-Con(R) CTS (checked low)	In	HID services, AM services
0x3F	ExtUart3Cts	0x1C	0x3500040E	D, 4	Joy-Con(L) CTS (checked low)	In	HID services, AM services
0x40	5VStepDownEn	0xD9	0x39000408	BB, 1	5V Step-Down Regulator Power	Out		Copper
0x41	UsbSwitchB2Oc	0x0C	0x04000401	B, 4	USB Root Port 2 Over Current	In	USB services	Copper
0x42	5VStepDownPg	0x0D	0x39000409	B, 5	5V Step-Down Regulator Power Good Flag	In		Copper
0x43	UsbSwitchAEn	0x21	0x04000402	E, 1	USB Power	Out	USB services	Copper
0x44	UsbSwitchAFlag	0x27	0x04000403	E, 7	USB Power Flag	In	USB services	Copper
0x45	UsbSwitchB3Oc	0x92	0x04000404	S, 2	USB Root Port 3 Over Current	In	USB services	Copper
0x46	UsbSwitchB3En	0x95	0x04000405	S, 5	USB Root Port 3 Power	Out	USB services	Copper
0x47	UsbSwitchB2En	0x98	0x04000406	T, 0	USB Root Port 2 Power	Out	USB services	Copper
0x48	Hdmi5VEn	0x10	0x34000004	C, 0	HDMI 5V	Out	NV services	Copper, Calcio
0x49	UsbSwitchB1En	0x11	0x04000407	C, 1	USB Root Port 1 Power	Out	USB services	Copper, Calcio
0x4A	HdmiPdTrEn	0x12	0x34000005	C, 2	HDMI/Power Delivery Switch	Out	NV services	Copper, Calcio
0x4B	FanEn	0x42	0x3D000003	I, 2	Fan Enable	Out	PTM services	Copper
0x4C	UsbSwitchB1Oc	0xE6	0x04000408	CC, 6	USB Root Port 1 Over Current	In	USB services	Copper, Calcio
[2.0.0+] 0x4D	PwmFan	0xAC	0x3D000001	V, 4	Pulse-Width Modulation Fan Control	Out	PTM services	Copper
[2.0.0+] 0x4E	HdmiHpd	0xE1	0x34000006	CC, 1	HDMI Hot Plug Detect	In	NV services	Copper, Calcio
[5.0.0+] 0x4F	Max77812Irq	0x56	0x3E000003	K, 6		In		Hoag, Iowa, Calcio
[6.0.0+] 0x50	Debug0	0x20	0xCA000001	E, 0		Out		Hoag, Calcio, Aula
[6.0.0+] 0x51	Debug1	0x21	0xCA000002	E, 1		Out		Hoag, Calcio, Aula
[6.0.0+] 0x52	Debug2	0x22	0xCA000003	E, 2		Out		Hoag, Calcio, Aula
[6.0.0+] 0x53	Debug3	0x23	0xCA000004	E, 3		Out		Hoag, Calcio, Aula
[6.0.0+] 0x54	NfcIrq	0x4C	0x36000004	J, 4		In	NFC services	Hoag
[6.0.0+] 0x55	NfcRst	0x57	0x36000003	K, 7		Out	NFC services	Hoag
[6.0.0+] 0x56	McuIrq	0x27 ([6.0.0-8.0.0] 0x94)	0x35000415	S, 4		In		Hoag
[6.0.0+] 0x57	McuBoot	0x98	0x35000416	T, 0		Out	HID services	Hoag
[6.0.0+] 0x58	McuRst	0x99	0x35000417	T, 1		Out	HID services	Hoag
[6.0.0+] 0x59	Vdd5V3En	0xBB	0x39000403	X, 3	5V3 Fan Power	Out	PTM services	Hoag, Iowa, Aula
[6.0.0+] 0x5A	McuPor	0xE5	0x35000418	CC, 5		Out	HID services	Hoag
[6.0.0+] 0x5B		0xAB	0x35000005	V, 3	SioMcu Input	In	HID services, AM services	Hoag
[6.0.0+] 0x5C	NfcEn	0x4E	0x36000002	J, 6		Out	NFC services	Hoag
[7.0.0+] -	ExtUart2Rts	0x32	0x35000406	G, 2	Joy-Con(R) RTS	In
[7.0.0+] -	ExtUart3Rts	0x1B	0x35000410	D, 3	Joy-Con(L) RTS	In
[7.0.0+] -		0x17	0x3500041B	C, 7		In		Hoag
[7.0.0+] -		0x18	0x3500041C	D, 0		In		Hoag
[7.0.0+] -		0x15	0x3500041D	C, 5		In		Hoag
[7.0.0+] -		0x16	0x3500041E	C, 6		In		Hoag
[10.0.0+] -		0xC5	0x35000065	Y, 5		Out		Hoag
[10.0.0+] -		0x29	0x04000409	F, 1		Out		Calcio
[10.0.0+] -		0x38	0x34000401	H, 0	Dp2hdmi	In	Display services	Aula

GpioPadDescriptor

Bits	Description
7-5	Controller index
4-3	Port index
2-0	Pin number

I2cDevice

This is "nn::i2c::I2cDevice".

Value	Name	DeviceCode	Port:Addr	Is10bit	Speed	Max Retries	Retry Delay	Description	Used by (services)	Used by (hardware)
0	ClassicController	0x350000C9	0:52	N	100000	0	0	DebugPad Driver	HID services	Icosa, Iowa, Aula
1	Ftm3bd56	0x35000033	2:49	N	400000	0	0	TouchPanel	HID services	Icosa, Hoag, Iowa, Aula
2	Tmp451	0x3E000001	0:4C	N	100000	0	0	Temperature Sensor	PTM services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
3	Nct72	0x3E000001	0:4C	N	100000	0	0	Temperature Sensor	PTM services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
4	Alc5639	0x33000001	0:1C	N	100000	0	0	Audio Codec	Audio services, Fatal services	Icosa, Hoag, Iowa, Aula
5	Max77620Rtc	0x3B000001	4:68	N	400000	3	5000000	PMIC RTC	PCV services	Icosa, Copper
6	Max77620Pmic	0x3A000001	4:3C	N	400000	3	5000000	PMIC	PCV services	Icosa, Copper
7	Max77621Cpu	0x3A000003	4:1B	N	400000	3	5000000	Sub-PMIC for CPU	PCV services	Icosa, Copper
8	Max77621Gpu	0x3A000004	4:1C	N	400000	3	5000000	Sub-PMIC for GPU	PCV services	Icosa, Copper
9	Bq24193	0x39000001	0:6B	N	100000	3	5000000	Charger IC	PTM services	Icosa, Hoag, Iowa, Aula
10	Max17050	0x39000033	0:36	N	100000	3	5000000	Fuel Gauge IC	PTM services, PCV services	Icosa, Hoag, Iowa, Aula
11	Bm92t30mwv	0x040000C9	0:18	N	100000	3	5000000	USB-PD controller	USB services	Icosa, Copper, Hoag, Iowa, Calcio, Aula
12	Ina226Vdd15v0Hb	0x3F000401	1:40	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
13	Ina226VsysCpuDs or Ina226VddCpuAp (SdevMariko)	0x3F000001	1:41	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
14	Ina226VsysGpuDs or Ina226VddGpuAp (SdevMariko)	0x3F000002	1:44	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
15	Ina226VsysDdrDs or Ina226VddDdr1V1Pmic (SdevMariko)	0x3F000003	1:45	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
16	Ina226VsysAp	0x3F000402	1:46	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
17	Ina226VsysBlDs	0x3F000403	1:47	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
18	Bh1730	0x35000047	1:29	N	400000	3	5000000	Ambient Light Sensor	Backlight services	Icosa, Hoag, Iowa, Aula
19	Ina226VsysCore or Ina226VddCoreAp (SdevMariko)	0x3F000404	1:48	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
20	Ina226Soc1V8 or Ina226VddSoc1V8 (SdevMariko)	0x3F000405	1:49	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
21	Ina226Lpddr1V8 or Ina226Vdd1V8 (SdevMariko)	0x3F000406	1:4A	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
22	Ina226Reg1V32	0x3F000407	1:4B	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
23	Ina226Vdd3V3Sys	0x3F000408	1:4D	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
[2.0.0+] 24	HdmiDdc	0x34000001	3:50	N	100000	0	0	HDMI DDC	NV services	Copper, Calcio
[2.0.0+] 25	HdmiScdc	0x34000002	3:54	N	100000	0	0	HDMI SCDC	NV services	Copper, Calcio
[2.0.0+] 26	HdmiHdcp	0x34000003	3:3A	N	100000	0	0	HDMI HDCP	NV services	Copper, Calcio
[4.0.0+] 27	Fan53528	0x3A000005	4:52 ([4.0.0-8.0.0] 4:A4)	N	400000	0	0	Buck Regulator		Hoag, Iowa, Calcio, Aula
[4.0.0+] 28	Max77812Pmic	0x3A000002	4:31 ([8.0.0-9.2.0] 4:33, [4.0.0-8.0.0] 4:31)	N	400000	0	0	PMIC	PCV services	Hoag, Iowa, Calcio, Aula
[4.0.0+] 29	Max77812Pmic	0x3A000006 ([4.0.0-9.2.0] 0x3A000002)	4:33 ([4.0.0-8.0.0] 4:31)	N	400000	0	0	PMIC	PCV services	Hoag, Iowa, Calcio, Aula
[4.0.0+] 30	Ina226VddDdr0V6 (SdevMariko)	0x3F000409	1:4E	N	400000	3	5000000	Power Monitor	nvdbgsvc	Factory
[8.0.0+] 31		0x36000001	1:08	N	400000	3	5000000	MillauNfc	NFC services	Hoag

AddressingMode

This is "nn::i2c::AddressingMode".

Value	Name
0	BitWidth7
1	BitWidth10

TransactionOption

This is "nn::i2c::TransactionOption".

Value	Name
1	StartCondition
2	StopCondition

SpeedMode

This is "nn::i2c::SpeedMode".

Value	Name
0x186A0	Standard
0x61A80	Fast
0xF4240	FastPlus
0x33E140	HighSpeed

CommandId

This is "nn::i2c::detail::CommandId".

Value	Name
0	Send
1	Receive
2	Extension

SubCommandId

This is "nn::i2c::detail::SubCommandId".

Value	Name
0	Sleep

UartPort

This is "nn::uart::UartPort".

Value	Name	DeviceCode (internal)	DeviceCode (mapped)	Description
0	UART-A	0x03000001		Invalid
1	UART-D	0x03000004	0x37000001	Bluetooth
2	UART-B	0x03000002	0x35000405	Joy-Con(R)
3	UART-C	0x03000003	0x3500040F	Joy-Con(L)
4	UART-C	0x03000003	0x35000419	SioMcu

UartPortForDev

This is "nn::uart::UartPortForDev".

Value	Name	DeviceCode (internal)	DeviceCode (mapped)	Description
0	UART-A	0x03000001		Invalid
1	UART-B	0x03000002	0x35000405	Joy-Con(R)
2	UART-C	0x03000003	0x3500040F	Joy-Con(L)
3	UART-D	0x03000004	0x37000001	Bluetooth

FlowControlMode

This is "nn::uart::FlowControlMode".

Value	Name
0	None
1	Hardware

PortEventType

This is "nn::uart::PortEventType".

Value	Name
0	SendBufferEmpty
1	SendBufferReady
2	ReceiveBufferReady
3	ReceiveEnd

ChannelName

This is "nn::pwm::ChannelName".

Value	Name	DeviceCode	Description	Used by
0	Invalid
1	CpuFan	0x3D000001	PWM Channel 1	PTM services
2	LcdBacklight	0x3400003D	PWM Channel 0	Backlight services, NV services
3	Led	0x35000065	PMC LED Soft Blink	Bus services

AssignablePinGroupName

This is "nn::pinmux::AssignablePinGroupName".

Value	Description
0	GPIO(G, 0) and GPIO(G, 3)
1	GPIO(D, 1) and GPIO(D, 4)
2	Sdmmc1Clk or GPIO(M, 0), GPIO(M, 1), GPIO(M, 2), GPIO(M, 3), GPIO(M, 4) and GPIO(M, 5)
3	GPIO(V, 4)
100	Invalid

AssignablePinGroupNameForHardwareTest

This is "nn::pinmux::AssignablePinGroupNameForHardwareTest".

Value	Description
0	Invalid
1	Invalid
2	Invalid
3	Invalid
100	Uart4Tx, Uart4Rx, Uart4Rts and Uart4Cts

PinAssignment

This is "nn::pinmux::PinAssignment".

Value	Name
2	Sdmmc1OutputHigh
3	Sdmmc1ResetState
4	Sdmmc1SchmtEnable
5	Sdmmc1SchmtDisable

PinAssignmentForHardwareTest

This is "nn::pinmux::PinAssignmentForHardwareTest".

Value	Name
100	UartDHiZ
101	UartDEnable

SasbusPort

Value	Name	DeviceCode	Description
0	SPI4	0x3500003D	Joy-Con

AccessMode

This is "nn::ddsf::AccessMode".

Value	Name
0	None
1	Read
2	Write
3	ReadWrite