Boot2

Revision as of 22:38, 12 July 2021 by Zachycatgames (talk | contribs) (add boot2.Manu1st)

boot2 is the first non-built-in sysmodule. It's hardcoded to be the first sysmodule launched by PM.

On retail systems, the boot2 title is called boot2.prodBoot while on debug systems it's called boot2. Debug systems also have a version called boot2.SafeMode installed in SAFE for safe mode. During the factory setup process the boot2 title is called boot2.manuBoot instead.

boot2.prodBoot

It opens the pm:shell service and prior to 10.0.0 launches the following titles in order:

  • 0100000000000021 (psc)
  • 0100000000000009 (settings)
  • 0100000000000006 (usb)
  • 010000000000001D (pcie)
  • 010000000000000A (bus)
  • 0100000000000007 (tma)
  • 010000000000001A (pcv)

It then opens the set:sys service and reads a bool from the "boot" section called "force_maintenance" with default value set to "true".

If the value reads successfully as "false", it opens the gpio service and opens sessions for GPIOs 26 and 25. If both GPIOs read as zero, then maintenance mode is forced despite the setting being false. This checks if both volume up and down keys are held down at the same time.

If it's in maintenance mode then it opens the pm:bm service and calls SetMaintenanceBoot.

Prior to 10.0.0 it then launches the following titles in order:

  • 0100000000000023 (am)
  • 0100000000000019 (nvservices)
  • 010000000000001C (nvnflinger)
  • 010000000000002D (vi)
  • 010000000000001F (ns)
  • 0100000000000015 (lm)
  • 010000000000001B (ppc) [1.0.0-8.1.0]
  • 0100000000000010 (ptm)
  • 0100000000000013 (hid)
  • 0100000000000014 (audio)
  • 0100000000000029 (lbl)
  • 0100000000000016 (wlan)
  • 010000000000000B (bluetooth)
  • 0100000000000012 (bsdsockets)
  • 010000000000000F (nifm)
  • 0100000000000018 (ldn)
  • 010000000000001E (account)
  • 010000000000000E (friends) [skipped in maintenance mode]
  • 0100000000000020 (nfc)
  • 010000000000003C (jpegdec) [4.0.0+]
  • 0100000000000022 (capsrv)
  • 0100000000000024 (ssl)
  • 0100000000000025 (nim)
  • 010000000000000C (bcat) [skipped in maintenance mode]
  • 010000000000002B (erpt)
  • 0100000000000033 (es)
  • 010000000000002E (pctl)
  • 010000000000002A (btm)
  • 0100000000000030 (eupld) [skipped in maintenance mode]
  • 0100000000000031 (glue)
  • 0100000000000032 (eclct)
  • 010000000000002F (npns) [skipped in maintenance mode on 1.0.0-6.2.0]
  • 0100000000000034 (fatal)
  • 0100000000000037 (ro) [3.0.0+]
  • 0100000000000038 (profiler) (doesn't exist on retail systems) [3.0.0+]
  • 0100000000000039 (sdb) [3.0.0+]
  • 010000000000003A (migration) [4.0.0+]
  • 0100000000000035 (grc) [4.0.0+]
  • 010000000000003E (olsc) [6.0.0+]
  • 0100000000000041 (ngct) [9.0.0+]

In 10.0.0 the order was switched up a bit

It now starts by launching the following titles in order:

  • 0100000000000021 (psc)
  • 0100000000000009 (settings)
  • 0100000000000006 (usb)
  • 010000000000001D (pcie)
  • 010000000000000A (bus)
  • 010000000000001A (pcv)
  • 0100000000000007 (tma)

Then it launches the following titles in order:

  • 0100000000000023 (am)
  • 0100000000000019 (nvservices)
  • 010000000000001C (nvnflinger)
  • 010000000000002D (vi)
  • 0100000000000042 (pgl)
  • 010000000000001F (ns)
  • 0100000000000015 (lm)
  • 0100000000000010 (ptm)
  • 0100000000000013 (hid)
  • 0100000000000014 (audio)
  • 0100000000000016 (wlan)
  • 010000000000000B (bluetooth)
  • 0100000000000012 (bsdsockets)
  • 010000000000000F (nifm)
  • 0100000000000018 (ldn)
  • 010000000000001E (account)
  • 0100000000000020 (nfc)
  • 010000000000003C (jpegdec)
  • 0100000000000022 (capsrv)
  • 010000000000001B (capmtp) [11.0.0+]
  • 0100000000000024 (ssl)
  • 0100000000000025 (nim)
  • 010000000000002B (erpt)
  • 0100000000000033 (es)
  • 010000000000002E (pctl)
  • 010000000000002A (btm)
  • 0100000000000031 (glue)
  • 0100000000000032 (eclct)
  • 010000000000002F (npns)
  • 0100000000000034 (fatal)
  • 0100000000000037 (ro)
  • 0100000000000038 (profiler) (doesn't exist on retail systems)
  • 0100000000000039 (sdb)
  • 010000000000003A (migration) [10.0.0-11.0.1]
  • 0100000000000035 (grc) [10.0.0-11.0.1]
  • 010000000000003E (olsc)
  • 0100000000000041 (ngct)
  • 010000000000000E (friends) [skipped in maintenance mode]
  • 010000000000000C (bcat) [skipped in maintenance mode]
  • 0100000000000030 (eupld) [skipped in maintenance mode]

After launching all titles, it'll check the "boot!boot_devmenuapp_installer" setting and attempt to launch 01000000000020f0 (devmenuapp_installer) if it's set to true.

This list is probably optimized for boot-time. It launches display-related things first presumably to make sure it displays something as soon as possible.

After that, the process exits itself.

boot2

Just like boot2.prodBoot, it opens the pm:shell service and prior to 10.0.0 launches the following titles in order:

  • 0100000000000021 (psc)
  • 0100000000000009 (settings)
  • 0100000000000006 (usb)
  • 010000000000001D (pcie)
  • 010000000000000A (bus)
  • 0100000000000007 (tma)
  • 010000000000001A (pcv)

It then launches the following titles in order:

  • 0100000000000023 (am)
  • 0100000000000019 (nvservices)
  • 010000000000001C (nvnflinger)
  • 010000000000002D (vi)
  • 010000000000001F (ns)
  • 0100000000003003 (DebugMonitor0) [1.0.0-4.1.0]
  • 010000000000000D (dmnt)
  • 0100000000000015 (lm)
  • 010000000000001B (ppc) [1.0.0-8.1.0]
  • 0100000000000010 (ptm)
  • 0100000000000017 (cs)
  • 0100000000000011 (shell)
  • 0100000000000013 (hid)
  • 0100000000000014 (audio)
  • 0100000000000029 (lbl)
  • 0100000000000016 (wlan)
  • 010000000000000B (bluetooth)
  • 0100000000000012 (bsdsockets)
  • 010000000000000F (nifm)
  • 0100000000000018 (ldn)
  • 010000000000001E (account)
  • 010000000000000E (friends) [skipped in maintenance mode]
  • 0100000000000020 (nfc)
  • 010000000000003C (jpegdec) [4.0.0+]
  • 0100000000000022 (capsrv)
  • 0100000000000024 (ssl)
  • 0100000000000025 (nim)
  • 010000000000000C (bcat) [skipped in maintenance mode]
  • 010000000000002B (erpt)
  • 0100000000000033 (es)
  • 010000000000002E (pctl)
  • 010000000000002A (btm)
  • 0100000000000030 (eupld) [skipped in maintenance mode]
  • 0100000000000031 (glue)
  • 0100000000000032 (eclct)
  • 010000000000B120 (nvdbgsvc)
  • 010000000000002F (npns) [skipped in maintenance mode on 1.0.0-6.2.0]
  • 0100000000000034 (fatal)
  • 0100000000000037 (ro) [3.0.0+]
  • 0100000000000038 (profiler)
  • 0100000000000039 (sdb) [3.0.0+]
  • 010000000000003A (migration) [4.0.0+]
  • 0100000000000035 (grc) [4.0.0+]
  • 010000000000003E (olsc) [6.0.0+]
  • 0100000000000041 (ngct) [9.0.0+]

In 10.0.0 the order was switched up a bit

It now starts by launching the following titles in order:

  • 0100000000000021 (psc)
  • 0100000000000009 (settings)
  • 0100000000000006 (usb)
  • 010000000000001D (pcie)
  • 010000000000000A (bus)
  • 010000000000001A (pcv)
  • 0100000000000007 (tma) or 010000000000B240 (htc)
  • 010000000000000D (dmnt) or 010000000000D609 (dmnt.gen2)

If the "boot!use_htc_gen2" setting is set to "true", htc and dmnt.gen2 are used, otherwise tma and dmnt are used.

Then it launches the following titles in order:

  • 0100000000000023 (am)
  • 0100000000000019 (nvservices)
  • 010000000000001C (nvnflinger)
  • 010000000000002D (vi)
  • 010000000000B120 (nvdbgsvc)
  • 0100000000000017 (cs)
  • 0100000000000011 (shell)
  • 0100000000000042 (pgl)
  • 010000000000001F (ns)
  • 0100000000000015 (lm)
  • 0100000000000010 (ptm)
  • 0100000000000013 (hid)
  • 0100000000000014 (audio)
  • 0100000000000016 (wlan)
  • 010000000000000B (bluetooth)
  • 0100000000000012 (bsdsockets)
  • 010000000000000F (nifm)
  • 0100000000000018 (ldn)
  • 010000000000001E (account)
  • 0100000000000020 (nfc)
  • 010000000000003C (jpegdec)
  • 0100000000000022 (capsrv)
  • 010000000000001B (capmtp) [11.0.0+]
  • 0100000000000024 (sll)
  • 0100000000000025 (nim)
  • 010000000000002B (erpt)
  • 0100000000000033 (es)
  • 010000000000002E (pctl)
  • 010000000000002A (btm)
  • 0100000000000031 (glue)
  • 0100000000000032 (eclct)
  • 010000000000002F (npns)
  • 0100000000000034 (fatal)
  • 0100000000000037 (ro)
  • 0100000000000038 (profiler)
  • 0100000000000039 (sdb)
  • 010000000000003A (migration) [10.0.0-11.0.1]
  • 0100000000000035 (grc) [10.0.0-11.0.1]
  • 010000000000003E (olsc)
  • 0100000000000041 (ngct)
  • 010000000000000E (friends) [skipped in maintenance mode]
  • 010000000000000C (bcat) [skipped in maintenance mode]
  • 0100000000000030 (eupld) [skipped in maintenance mode]

After launching all titles, it'll check the "boot!boot_devmenuapp_installer" setting and attempt to launch 01000000000020f0 (devmenuapp_installer) if it's set to true.

boot2.SafeMode

Normally it launches the exact same titles as boot2.prodBoot in the same order, but then finishes by launching 0100000000002041 (recovery) before exiting itself.

In maintenance mode its launch order is identical to the launch order in boot2 maintenance mode.

boot2.ManuBoot

Just like boot2.prodBoot, it opens the pm:shell service and launches the following titles in order:

  • 0100000000000021 (psc)
  • 0100000000000009 (settings)
  • 0100000000000006 (usb)
  • 010000000000001D (pcie)
  • 010000000000000A (bus)
  • 0100000000000007 (tma)
  • 010000000000001A (pcv)

If maintenance mode was requested, it then launches the following titles in order:

  • 0100000000000023 (am)
  • 0100000000000019 (nvservices)
  • 010000000000001C (nvnflinger)
  • 010000000000002D (vi)
  • 010000000000001F (ns)
  • 010000000000000D (dmnt)
  • 010000000000001F (ns)
  • 0100000000000015 (lm)
  • 010000000000001B (ppc) [1.0.0-8.1.0]
  • 0100000000000010 (ptm)
  • 0100000000000017 (cs)
  • 0100000000000011 (shell)
  • 0100000000000013 (hid)
  • 0100000000000014 (audio)
  • 0100000000000029 (lbl)
  • 0100000000000016 (wlan)
  • 010000000000000B (bluetooth)
  • 0100000000000012 (bsdsockets)
  • 010000000000000F (nifm)
  • 0100000000000018 (ldn)
  • 010000000000001E (account)
  • 0100000000000020 (nfc)
  • 010000000000003C (jpegdec) [4.0.0+]
  • 0100000000000022 (capsrv)
  • 0100000000000024 (ssl)
  • 0100000000000025 (nim)
  • 010000000000002B (erpt)
  • 0100000000000033 (es)
  • 010000000000002E (pctl)
  • 010000000000002A (btm)
  • 0100000000000031 (glue)
  • 0100000000000032 (eclct)
  • 010000000000B120 (nvdbgsvc)
  • 010000000000002F (npns) [7.0.0+]
  • 0100000000000034 (fatal)
  • 0100000000000037 (ro) [3.0.0+]
  • 0100000000000038 (profiler) [3.0.0+]
  • 0100000000000039 (sdb) [3.0.0+]
  • 010000000000003A (migration) [4.0.0+]
  • 0100000000000035 (grc) [4.0.0+]
  • 010000000000003E (olsc) [6.0.0+]
  • 0100000000000041 (ngct) [9.0.0+]
  • 01000000000020D1 (DevSafeModeUpdater) [1.0.0]

Otherwise, it launches exactly the same titles as boot2.prodBoot in the same order, but then finishes by launching 010000000000B14A (Manu) before exiting itself.

After launching all titles, it'll check the "boot!boot_devmenuapp_installer" setting and attempt to launch 01000000000020f0 (devmenuapp_installer) if it's set to true.

boot2.FromHost

Loads a set of processes using a list from a text document then exits.

First it checks if a "SIGLO_BOOT_LIST_DIR" environmental variable is present on the host PC, if it is, it loads the list from "NX-NXFP2-a64.txt" from the directory specified in "SIGLO_BOOT_LIST_DIR".

If that fails, it checks if a "SIGLO_BOOT_LIST_PATH" environmental variable is present on the PC, if it is, it loads the list from the path specified by "SIGLO_BOOT_LIST_PATH".

If that also fails, it defaults to loading "C:/siglo_boot/list.txt" from the host PC.

boot2.Manu1st

Just like boot2.prodBoot, it opens the pm:shell service and launches the following titles in order:

  • 0100000000000021 (psc)
  • 0100000000000009 (settings)
  • 0100000000000006 (usb)
  • 010000000000001D (pcie)
  • 010000000000000A (bus)
  • 010000000000001A (pcv)
  • 010000000000B14A (manu)
  • 010000000000001F (ns)
  • 0100000000000015 (lm)
  • 0100000000000034 (fatal)

After launching these processes, it exits.