Network Interface services

nifm:a, nifm:s, nifm:u

These are "nn::nifm::detail::IStaticService".

Max sessions: nifm:a = 0x2, nifm:s = 0x10, nifm:u = 0x5.

nifm:u = User, nifm:s = System, and nifm:a = Admin.

Cmd	Name	Notes
4	#CreateGeneralServiceOld ([1.0.0-2.3.0] CreateGeneralService)
5	[3.0.0+] #CreateGeneralService

CreateGeneralServiceOld

No input, returns an #IGeneralService.

CreateGeneralService

Takes a PID and an input u64 reserved_pid, returns an #IGeneralService.

IGeneralService

This is "nn::nifm::detail::IGeneralService".

Cmd	Name	Notes
1	#GetClientId
2	CreateScanRequest	Returns an #IScanRequest.
4	CreateRequest	Returns an #IRequest.
5	GetCurrentNetworkProfile
6	EnumerateNetworkInterfaces
7	EnumerateNetworkProfiles
8	GetNetworkProfile
9	SetNetworkProfile
10	RemoveNetworkProfile
11	GetScanDataOld ([1.0.0-3.0.2] GetScanData)
12	GetCurrentIpAddress
13	GetCurrentAccessPointOld ([1.0.0-3.0.2] GetCurrentAccessPoint)
14	CreateTemporaryNetworkProfile	Returns an #INetworkProfile.
15	GetCurrentIpConfigInfo
16	SetWirelessCommunicationEnabled
17	IsWirelessCommunicationEnabled
18	GetInternetConnectionStatus
19	SetEthernetCommunicationEnabled
20	IsEthernetCommunicationEnabled
21	#IsAnyInternetRequestAccepted
22	IsAnyForegroundRequestAccepted
23	PutToSleep
24	WakeUp
25	GetSsidListVersion
26	SetExclusiveClient
27	GetDefaultIpSetting
28	SetDefaultIpSetting
29	SetWirelessCommunicationEnabledForTest
30	SetEthernetCommunicationEnabledForTest
31	[2.0.0+] GetTelemetorySystemEventReadableHandle
32	[2.0.0+] GetTelemetryInfo
33	[2.0.0+] ConfirmSystemAvailability
34	[4.0.0+] SetBackgroundRequestEnabled
35	[4.0.0+] GetScanData
36	[4.0.0+] GetCurrentAccessPoint
37	[4.0.0+] Shutdown
38	[6.0.0+] GetAllowedChannels
39	[8.0.0+] NotifyApplicationSuspended
40	[8.0.0+] SetAcceptableNetworkTypeFlag
41	[8.0.0+] GetAcceptableNetworkTypeFlag
42	[8.0.0+] NotifyConnectionStateChanged
43	[9.0.0+] SetWowlDelayedWakeTime

GetClientId

Takes a type-0x1A output buffer containing a #ClientId, no output.

The wrapper for this with official sw will return 0 when any errors occur (wrapper returns #ClientId not Result).

IsAnyInternetRequestAccepted

Takes a type-0x19 input buffer containing a #ClientId, returns an output u8 bool.

The wrapper for this with official sw will return 0 when any errors occur (wrapper returns bool not Result).

IScanRequest

This is "nn::nifm::detail::IScanRequest".

Cmd	Name
0	Submit
1	IsProcessing
2	GetResult
3	GetSystemEventReadableHandle
4	[6.0.0+] SetChannels

IRequest

This is "nn::nifm::detail::IRequest". This represents an application or sysmodule's request to bring a network up.

Cmd	Name
0	#GetRequestState
1	#GetResult
2	#GetSystemEventReadableHandles
3	#Cancel
4	#Submit
5	#SetRequirement
6	SetRequirementPreset
8	SetPriority
9	SetNetworkProfileId
10	SetRejectable
11	#SetConnectionConfirmationOption
12	#SetPersistent
13	SetInstant
14	SetSustainable
15	SetRawPriority
16	SetGreedy
17	SetSharable
18	SetRequirementByRevision
19	#GetRequirement
20	GetRevision
21	GetAppletInfo
22	GetAdditionalInfo
23	[3.0.0+] SetKeptInSleep
24	[3.0.0+] RegisterSocketDescriptor
25	[3.0.0+] UnregisterSocketDescriptor

GetRequestState

Number	Description
1	Not yet submitted or error
2	Pending (sdk calls this OnHold)
3	Connected

GetResult

If the request enters state 1, this command can be used to determine why. It responds with the nice networking error codes that there are support pages for.

GetSystemEventReadableHandles

Returns two event handles. The first one signals when the RequestState changes.

Cancel

Cancels the request to bring the network up.

Submit

Submits the request to bring the network up. Call this after configuring the request.

SetRequirement

Takes a total of 0x20-bytes of input, no output.

[3.0.0+] Takes an additional 4-bytes of input.

SetConnectionConfirmationOption

Set how to verify the internet connection.

Option	Description
0
1
2	"Local" network (does not check for working DNS)
3
4	Default
5

SetPersistent

If this is set, when the network connection is lost, rather than causing the request to enter state 1, it will instead enter state 2 and attempt to bring the network back up again.

GetRequirement

No input, returns a total of 0x20-bytes of output.

[3.0.0+] Returns an additional 4-bytes of output.

INetworkProfile

This is "nn::nifm::detail::INetworkProfile".

Cmd	Name
0	Update
1	PersistOld ([1.0.0-2.3.0] Persist)
2	[3.0.0+] Persist

ClientId

This is "nn::nifm::ClientId". This contains an u32.