WLAN services
wlan:inf
This is "nn::wlan::detail::IInfraManager".
Cmd | Name |
---|---|
0 | OpenMode |
1 | CloseMode |
2 | GetMacAddress |
3 | StartScan |
4 | StopScan |
5 | Connect |
6 | CancelConnect |
7 | Disconnect |
8 | GetSystemEvent |
9 | GetConnectionStatus |
10 | GetState |
11 | GetScanResult |
12 | GetRssi |
13 | ChangeRxAntenna |
14 | GetFwVersion |
15 | RequestSleep |
16 | RequestWakeUp |
17 | ConnectWithWps |
18 | [3.0.0+] |
19 | [3.0.0+] |
20 | [3.0.0+] |
21 | [3.0.0+] |
22 | [3.0.0+] |
23 | [3.0.0+] |
24 | [3.0.0+] |
25 | [3.0.0+] |
26 | [4.0.0+] |
27 | [4.0.0+] |
28 | [5.0.0+] |
29 | [7.0.0+] |
30 | [8.0.0+] |
31 | [11.0.0+] |
32 | [11.0.0+] |
33 | [11.0.0+] |
34 | [11.0.0+] |
35 | [11.0.0+] |
36 | [11.0.0+] |
37 | [11.0.0+] |
38 | [13.0.0+] |
[4.0.0+] Connect now takes an additional 4-bytes of input.
[5.0.0+] Cmd24 now returns a total of 0x58-bytes of output instead of 0x5C.
[7.0.0+] Input/output for cmds 27/28 were swapped, perhaps these cmds were swapped?
Cmd30
Takes an input s32, no output.
The input s32 must be <=0xE10 (3600) and >= -1. The input value is written into state, then this returns 0.
The user-process code using this cmd also has the above bounds check.
This cmd is used by nifm with a value from state, prior to using RequestSleep.
wlan:lcl
This is "nn::wlan::detail::ILocalManager".
Cmd | Name |
---|---|
0 | OpenMasterMode |
1 | CloseMasterMode |
2 | OpenClientMode |
3 | CloseClientMode |
4 | OpenSpectatorMode |
5 | CloseSpectatorMode |
6 | GetMacAddress |
7 | CreateBss |
8 | DestroyBss |
9 | StartScan |
10 | StopScan |
11 | Connect |
12 | CancelConnect |
13 | Join |
14 | CancelJoin |
15 | Disconnect |
16 | SetBeaconLostCount |
17 | GetSystemEvent |
18 | GetConnectionStatus |
19 | GetClientStatus |
20 | GetBssIndicationEvent |
21 | GetBssIndicationInfo |
22 | GetState |
23 | GetAllowedChannels |
24 | AddIe |
25 | DeleteIe |
26 | PutFrameRaw |
27 | CancelGetFrame |
28 | CreateRxEntry |
29 | DeleteRxEntry |
30 | AddEthertypeToRxEntry |
31 | DeleteEthertypeFromRxEntry |
32 | AddMatchingDataToRxEntry |
33 | RemoveMatchingDataFromRxEntry |
34 | GetScanResult |
35 | PutActionFrameOneShot |
36 | SetActionFrameWithBeacon |
37 | CancelActionFrameWithBeacon |
38 | CreateRxEntryForActionFrame |
39 | DeleteRxEntryForActionFrame |
40 | AddSubtypeToRxEntryForActionFrame |
41 | DeleteSubtypeFromRxEntryForActionFrame |
42 | CancelGetActionFrame |
43 | GetRssi |
44 | SetMaxAssociationNumber |
45 | [4.0.0+] |
46 | [4.0.0+] |
47 | [4.0.0+] |
48 | [10.0.0+] ([4.0.0-8.1.0]) |
49 | [6.0.0-8.1.0] |
50 | [6.0.0-8.1.0] |
51 | [8.0.0-8.1.0] |
52 | [8.0.0-8.1.0] |
49 | [13.0.0+] |
50 | [13.0.0+] |
51 | [13.0.0+] |
[4.0.0+] CreateBss, Connect, and Join now takes an additional 4-bytes of input.
[5.0.0+] GetAllowedChannels now returns a total of 4-bytes of output instead of 0x50, and now takes a type-0xA output buffer.
[9.0.0+] Almost all cmds had input/output changed / cmds moved around (?).
[10.0.0+] Cmd46 now takes a total of 1-byte of input instead of 6-bytes, while cmd47 now takes a total of 6-bytes of input instead of 1-byte.
wlan:lg
This is "nn::wlan::detail::ILocalGetFrame".
Cmd | Name |
---|---|
0 | GetFrameRaw |
wlan:lga
This is "nn::wlan::detail::ILocalGetActionFrame".
Cmd | Name |
---|---|
0 | GetActionFrame |
[5.0.0+] Cmd0 now takes an additional 4-bytes of input, and returns an additional 4-bytes of output.
wlan:sg
This is "nn::wlan::detail::ISocketGetFrame".
Cmd | Name |
---|---|
0 | GetFrameRaw |
wlan:soc
This is "nn::wlan::detail::ISocketManager".
Cmd | Name |
---|---|
0 | PutFrameRaw |
1 | CancelGetFrame |
2 | CreateRxEntry |
3 | DeleteRxEntry |
4 | AddEthertypeToRxEntry |
5 | DeleteEthertypeFromRxEntry |
6 | GetMacAddress |
7 | SwitchTsfTimerFunction |
8 | GetDeltaTimeBetweenSystemAndTsf |
9 | RegisterSharedMemory |
10 | UnregisterSharedMemory |
11 | EnableSharedMemory |
12 | [6.0.0+] |
wlan:dtc
This was added with [6.0.0+].
Cmd | Name |
---|---|
0 | |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | |
8 | |
9 | |
10 | |
11 | |
12 | |
13 | |
14 | |
15 | |
16 | |
17 | |
18 | |
19 | |
20 | |
21 | |
22 | |
23 | |
24 | |
25 | |
26 | |
27 |
[7.0.0+] Cmd14 now takes an input u8.
Notes
Versions
System Version | Firmware string |
---|---|
[1.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-aoe Version: 7.35.252.58 CRC: f592f3bf Date: Tue 2016-10-04 23:54:54 PDT Ucode Ver: 1020.221 FWID: 01-5ec2fbfd |
[2.0.0-2.2.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe Version: 7.35.64.1 CRC: 301f7804 Date: Fri 2017-02-17 01:03:01 PST Ucode Ver: 1020.223 FWID: 01-82d1f902 |
[3.0.0-3.0.2] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.70 CRC: f3b554fd Date: Thu 2017-05-04 19:04:04 PDT Ucode Ver: 1020.223 FWID: 01-5d27fda5 |
[4.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.75 (r666384) CRC: 58f59a6f Date: Wed 2017-08-16 22:27:11 PDT Ucode Ver: 1020.223 |
[5.0.0-5.1.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.78.1.1 (r683984) CRC: 6a10caf9 Date: Wed 2018-02-21 21:43:01 PST Ucode Ver: 1020.223 FWID 01-ae4e196d |
[6.0.0-6.2.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.84 (r692035) CRC: 937bcfc9 Date: Tue 2018-06-19 19:36:54 PDT Ucode Ver: 1020.225 FWID 01-71fd007e |
[7.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.87 (r708450) CRC: 5f41af12 Date: Thu 2018-10-25 19:11:47 PDT Ucode Ver: 1020.226 FWID 01-377c0939 |
[8.0.0-8.1.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.90 (r711053) CRC: 30dcf8a5 Date: Thu 2019-02-28 18:12:24 PST Ucode Ver: 1020.226 FWID 01-e691490c |
[9.0.0-9.1.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.93 (r717555) CRC: d8363dad Date: Mon 2019-07-01 23:43:14 PDT Ucode Ver: 1020.228 FWID 01-c90a462 |
[10.0.0-10.1.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.96 (r723441) CRC: f6823c05 Date: Tue 2019-11-19 22:31:29 PST Ucode Ver: 1020.228 FWID 01-a1b7e0a4 |
[11.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.99 (r725630) CRC: 320007b0 Date: Mon 2020-05-25 19:51:18 PDT Ucode Ver: 1020.228 FWID 01-822b442d |
[12.0.0-13.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.104 (r728022) CRC: f0b454ec Date: Wed 2021-02-24 04:39:25 PST Ucode Ver: 1020.228 FWID 01-fbba058 |
- [2.0.0+] Besides the version update, added "gtkoe" to the string.
- [3.0.0+] Besides the version update, added "tcpkaoe" to the string.
- [6.0.0+] Besides the version update, added "clm_4356a3_ntd" to the string.
- [7.0.0+] Besides the version update, added "noclminc" to the string.