Changes

656 bytes added ,  03:01, 5 December 2019
Line 271: Line 271:  
             // Architecture is 0xD07 (Cortex-A57).
 
             // Architecture is 0xD07 (Cortex-A57).
 
             cpuactlr_value = 0x1000000;    // Non-cacheable load forwarding enabled
 
             cpuactlr_value = 0x1000000;    // Non-cacheable load forwarding enabled
             cpuectlr_value = 0x1B00000040; // TODO: What is this?
+
             cpuectlr_value = 0x1B00000040; // Enable the processor to receive instruction cache and TLB maintenance operations broadcast from other processors in the cluster; set the L2 load/store data prefetch distance to 8 requests; set the L2 instruction fetch prefetch distance to 3 requests.
 
             if (hw_variant == 0 || (hw_variant == 1 && hw_revision <= 1)) {
 
             if (hw_variant == 0 || (hw_variant == 1 && hw_revision <= 1)) {
 
                 // If supported, disable load-pass DMB.
 
                 // If supported, disable load-pass DMB.
Line 282: Line 282:  
         } else if (architecture == 0xD03) { // 9.0.0+
 
         } else if (architecture == 0xD03) { // 9.0.0+
 
             // Architecture is 0xD03 (Cortex-A53).
 
             // Architecture is 0xD03 (Cortex-A53).
             cpuactlr_value = 0x90CA000; // TODO: What is this?
+
             cpuactlr_value = 0x90CA000; // Set L1 data prefetch control to allow 5 outstanding prefetches; enable device split throttle; set the number of independent data prefetch streams to 2; disable transient and no-read-allocate hints for loads; set write streaming no-allocate threshold so the 128th consecutive streaming cache line does not allocate in the L1 or L2 cache.
             cpuectlr_value = 0x40;      // TODO: What is this?
+
             cpuectlr_value = 0x40;      // Enable hardware management of data coherency with other cores in the cluster.
 
             if (hw_variant != 0 || (hw_variant == 0 && hw_revision > 2)) {
 
             if (hw_variant != 0 || (hw_variant == 0 && hw_revision > 2)) {
                 // TODO: What is this?
+
                 // If supported, enable data cache clean as data cache clean/invalidate.
 
                 cpuactlr_value |= 0x100000000000;
 
                 cpuactlr_value |= 0x100000000000;
 
             }
 
             }