2,939
edits
Changes
no edit summary
= Structure =
= Structure =
Below is the BCT structure used by the Switch, which is a minimal variation of the Tegra 210 BCT format.
Below is the BCT structure used by the Switch, which is a minimal variation of the Tegra 210 BCT format.
|}
|}
== customer_data ==
This data block is ignored by the boot ROM, therefore is available for the programmer to use freely.
This data block is ignored by the boot ROM, therefore is available for the programmer to use freely.
The Switch uses 0xB0 bytes of this area, at offset 0x0450, to store the active [[Flash_Filesystem#Keyblob|keyblob]]. All remaining bytes are zero.
The Switch uses 0xB0 bytes of this area, at offset 0x0450, to store the active [[Flash_Filesystem#Keyblob|keyblob]]. All remaining bytes are zero.
| 0x80
| 0x80
| 0x10
| 0x10
| [[Package1#Stage_1|Stage 1]] key
| [[Package1#PK11_Blob|PK11]] key
|}
|}
== bootloader0_info ==
=== 1.0.0 - 2.3.0 ===
The version field is set to 0x01, meaning that the first keyblob is to be used.
The version field is set to 0x01, meaning that the first keyblob is to be used.
=== 3.0.0 ===
The version field was changed to 0x02, meaning that the second keyblob is now used.
The version field was changed to 0x02, meaning that the second keyblob is now used.
=== 3.0.1 - 3.0.2 ===
The version field was changed to 0x03, meaning that the third keyblob is now used.
The version field was changed to 0x03, meaning that the third keyblob is now used.
== IRAM ==
=== 4.0.0 - 4.1.0 ===
The version field was changed to 0x04, meaning that the fourth keyblob is now used.