2,939
edits
Changes
no edit summary
[5.0.0+] SetDetachedSharedFrameBufferImage now takes an additional 0x10-bytes of input. CopyDetachedSharedFrameBufferImage now takes an additional 0x18-bytes of input. SetDetachedSharedFrameBufferSubImage now takes an additional 0x10-bytes of input, and the buffer type was changed from 0x5 to 0x45.
[5.0.0+] SetDetachedSharedFrameBufferImage now takes an additional 0x10-bytes of input. CopyDetachedSharedFrameBufferImage now takes an additional 0x18-bytes of input. SetDetachedSharedFrameBufferSubImage now takes an additional 0x10-bytes of input, and the buffer type was changed from 0x5 to 0x45.
= lbl =
This is "nn::lbl::detail::ILblController".
[11.0.0+] this was moved from [[PTM_services|ptm]].
{| class="wikitable" border="1"
|-
! Cmd || Name
|-
| 0 || SaveCurrentSetting
|-
| 1 || LoadCurrentSetting
|-
| 2 || SetCurrentBrightnessSetting
|-
| 3 || GetCurrentBrightnessSetting
|-
| 4 || ApplyCurrentBrightnessSettingToBacklight
|-
| 5 || GetBrightnessSettingAppliedToBacklight
|-
| 6 || SwitchBacklightOn
|-
| 7 || SwitchBacklightOff
|-
| 8 || GetBacklightSwitchStatus
|-
| 9 || EnableDimming
|-
| 10 || DisableDimming
|-
| 11 || IsDimmingEnabled
|-
| 12 || EnableAutoBrightnessControl
|-
| 13 || DisableAutoBrightnessControl
|-
| 14 || IsAutoBrightnessControlEnabled
|-
| 15 || SetAmbientLightSensorValue
|-
| 16 || [[#GetAmbientLightSensorValue]]
|-
| 17 || SetBrightnessReflectionDelayLevel
|-
| 18 || GetBrightnessReflectionDelayLevel
|-
| 19 || SetCurrentBrightnessMapping
|-
| 20 || GetCurrentBrightnessMapping
|-
| 21 || SetCurrentAmbientLightSensorMapping
|-
| 22 || GetCurrentAmbientLightSensorMapping
|-
| 23 || [3.0.0+] IsAmbientLightSensorAvailable
|-
| 24 || [3.0.0+] SetCurrentBrightnessSettingForVrMode
|-
| 25 || [3.0.0+] GetCurrentBrightnessSettingForVrMode
|-
| 26 || [3.0.0+] [[#EnableVrMode]]
|-
| 27 || [3.0.0+] [[#DisableVrMode]]
|-
| 28 || [3.0.0+] [[#IsVrModeEnabled]]
|-
| 29 || [7.0.0+] IsAutoBrightnessControlSupported
|}
== Ambient Light Sensor Notes ==
The BH1730 outputs 2 values. Visible light and IR light. This is then calculated through an algorithm that checks for Gain, Measurement time, filter qualities and ouputs lux (max correct measurement of 100K lux).
The default values are Gain 64x and ITIME of 38 (256 - 218). This allows for a max lux value of 17972 lux when visible light value is maximum and IR light is 0. When both of them are on their limit, the output is 1192 lux.
The sensor is fully configurable.
== GetAmbientLightSensorValue ==
No input. Before 5.x, outputs lux in float. (5.0.0+) Returns an output struct:
{| class="wikitable" border="1"
|-
! Offset || Size || Description
|-
| 0x0 || 0x4 || bOverLimit. (u32) Equals to 1 if visible or IR light data is over 65534.
|-
| 0x4 || 0x4 || fLux. (float) Value in lux from the ambient light sensor.
|}
Note: if bOverLimit=1 and the default ALS configuration is used, the measurement of fLux should not be considered and the actual max value depends on the type of light. Ranges from 12.5K - 17.5K.
== GetCurrentBrightnessSetting ==
No input. Returns an output u32 int of the current backlight level.
== GetBrightnessSettingAppliedToBacklight ==
No input. Returns an output u32 int of the backlight level computed from the ambient light sensor.
== IsAutoBrightnessControlEnabled ==
No input. Returns an output u8 bool indicating whether auto brightness is enabled.
== EnableVrMode ==
No input/output. Used by [[AM_services#SetVrModeEnabled]].
Sets a global state field to 0x1.
== DisableVrMode ==
No input/output. Used by [[AM_services#SetVrModeEnabled]].
Sets the global state field used by [[#EnableVrMode]] to 0x0.
== IsVrModeEnabled ==
No input. Returns an output u8 bool set by the above commands.
= DisplayInfo =
= DisplayInfo =