A host driver for communicating with the TSEC is mapped to physical address 0x54500000 with a total size of 0x40000 bytes and exposes several registers.
Registers
The TSEC's MMIO space is divided as follows:
- 0x54500000 to 0x54501000: THI (Tegra Host Interface)
- 0x54501000 to 0x54501400: FALCON (Falcon microcontroller)
- 0x54501400 to 0x54501600: SCP (Secure coprocessor)
- 0x54501600 to 0x54501680: TFBIF (Tegra Framebuffer Interface)
- 0x54501680 to 0x54501700: CG (Clock Gate)
- 0x54501700 to 0x54501800: BAR0 (HOST1X device DMA)
- 0x54501800 to 0x54501900: TEGRA (Miscellaneous interfaces)
TSEC_THI_INCR_SYNCPT
Bits
|
Description
|
0-9
|
TSEC_THI_INCR_SYNCPT_INDX
|
10-17
|
TSEC_THI_INCR_SYNCPT_COND
|
TSEC_THI_INCR_SYNCPT_CTRL
Bits
|
Description
|
0
|
TSEC_THI_INCR_SYNCPT_CTRL_SOFT_RESET
|
8
|
TSEC_THI_INCR_SYNCPT_CTRL_NO_STALL
|
16
|
TSEC_THI_INCR_SYNCPT_CTRL_SOFT_RESET_0
|
17
|
TSEC_THI_INCR_SYNCPT_CTRL_NO_STALL_0
|
18
|
TSEC_THI_INCR_SYNCPT_CTRL_SOFT_RESET_1
|
19
|
TSEC_THI_INCR_SYNCPT_CTRL_NO_STALL_1
|
20
|
TSEC_THI_INCR_SYNCPT_CTRL_SOFT_RESET_2
|
21
|
TSEC_THI_INCR_SYNCPT_CTRL_NO_STALL_2
|
22
|
TSEC_THI_INCR_SYNCPT_CTRL_SOFT_RESET_3
|
23
|
TSEC_THI_INCR_SYNCPT_CTRL_NO_STALL_3
|
24
|
TSEC_THI_INCR_SYNCPT_CTRL_SOFT_RESET_4
|
25
|
TSEC_THI_INCR_SYNCPT_CTRL_NO_STALL_4
|
TSEC_THI_INCR_SYNCPT_ERR
Bits
|
Description
|
0
|
TSEC_THI_INCR_SYNCPT_ERR_COND_STS_IMM
|
1
|
TSEC_THI_INCR_SYNCPT_ERR_COND_STS_OPDONE
|
2
|
TSEC_THI_INCR_SYNCPT_ERR_COND_STS_RD_DONE
|
3
|
TSEC_THI_INCR_SYNCPT_ERR_COND_STS_REG_WR_SAFE
|
4
|
TSEC_THI_INCR_SYNCPT_ERR_COND_STS_ENGINE_IDLE
|
TSEC_THI_CTXSW_INCR_SYNCPT
Bits
|
Description
|
0-9
|
TSEC_THI_CTXSW_INCR_SYNCPT_INDX
|
TSEC_THI_CTXSW
Bits
|
Description
|
0-9
|
TSEC_THI_CTXSW_CURR_CLASS
|
10
|
TSEC_THI_CTXSW_AUTO_ACK
|
11-20
|
TSEC_THI_CTXSW_CURR_CHANNEL
|
TSEC_THI_CTXSW_NEXT
Bits
|
Description
|
0-9
|
TSEC_THI_CTXSW_NEXT_NEXT_CLASS
|
10-19
|
TSEC_THI_CTXSW_NEXT_NEXT_CHANNEL
|
TSEC_THI_CONT_SYNCPT_EOF
Bits
|
Description
|
0-9
|
TSEC_THI_CONT_SYNCPT_EOF_INDEX
|
10
|
TSEC_THI_CONT_SYNCPT_EOF_COND
|
TSEC_THI_CONT_SYNCPT_L1
Bits
|
Description
|
0-9
|
TSEC_THI_CONT_SYNCPT_L1_INDEX
|
10
|
TSEC_THI_CONT_SYNCPT_L1_COND
|
TSEC_THI_STREAMID0
Bits
|
Description
|
0-6
|
TSEC_THI_STREAMID0_ID
|
TSEC_THI_STREAMID1
Bits
|
Description
|
0-6
|
TSEC_THI_STREAMID1_ID
|
TSEC_THI_THI_SEC
Bits
|
Description
|
0
|
TSEC_THI_THI_SEC_TZ_LOCK
|
4
|
TSEC_THI_THI_SEC_TZ_AUTH
|
8
|
TSEC_THI_THI_SEC_CH_LOCK
|
TSEC_THI_METHOD0
Bits
|
Description
|
0-11
|
TSEC_THI_METHOD0_OFFSET
|
Used to encode and send a method's ID over HOST1X to TSEC. This register mirrors the functionality of HOST1X's channel opcode submission.
The following methods are available:
ID
|
Method
|
0x100
|
NOP
|
0x140
|
PM_TRIGGER
|
0x200
|
SET_APPLICATION_ID
|
0x204
|
SET_WATCHDOG_TIMER
|
0x240
|
SEMAPHORE_A
|
0x244
|
SEMAPHORE_B
|
0x248
|
SEMAPHORE_C
|
0x24C
|
|
0x250
|
|
0x300
|
EXECUTE
|
0x304
|
SEMAPHORE_D
|
0x500
|
HDCP_INIT
|
0x504
|
HDCP_CREATE_SESSION
|
0x508
|
HDCP_VERIFY_CERT_RX
|
0x50C
|
HDCP_GENERATE_EKM
|
0x510
|
HDCP_REVOCATION_CHECK
|
0x514
|
HDCP_VERIFY_HPRIME
|
0x518
|
HDCP_ENCRYPT_PAIRING_INFO
|
0x51C
|
HDCP_DECRYPT_PAIRING_INFO
|
0x520
|
HDCP_UPDATE_SESSION
|
0x524
|
HDCP_GENERATE_LC_INIT
|
0x528
|
HDCP_VERIFY_LPRIME
|
0x52C
|
HDCP_GENERATE_SKE_INIT
|
0x530
|
HDCP_VERIFY_VPRIME
|
0x534
|
HDCP_ENCRYPTION_RUN_CTRL
|
0x538
|
HDCP_SESSION_CTRL
|
0x53C
|
HDCP_COMPUTE_SPRIME
|
0x540
|
HDCP_GET_CERT_RX
|
0x544
|
HDCP_EXCHANGE_INFO
|
0x548
|
HDCP_DECRYPT_KM
|
0x54C
|
HDCP_GET_HPRIME
|
0x550
|
HDCP_GENERATE_EKH_KM
|
0x554
|
HDCP_VERIFY_RTT_CHALLENGE
|
0x558
|
HDCP_GET_LPRIME
|
0x55C
|
HDCP_DECRYPT_KS
|
0x560
|
HDCP_DECRYPT
|
0x564
|
HDCP_GET_RRX
|
0x568
|
HDCP_DECRYPT_REENCRYPT
|
0x56C
|
|
0x570
|
|
0x574
|
HDCP_DECRYPT_STORED_KM
|
0x578
|
|
0x57C
|
|
0x700
|
HDCP_VALIDATE_SRM
|
0x704
|
HDCP_VALIDATE_STREAM
|
0x708
|
HDCP_TEST_SECURE_STATUS
|
0x70C
|
HDCP_SET_DCP_KPUB
|
0x710
|
HDCP_SET_RX_KPUB
|
0x714
|
HDCP_SET_CERT_RX
|
0x718
|
HDCP_SET_SCRATCH_BUFFER
|
0x71C
|
HDCP_SET_SRM
|
0x720
|
HDCP_SET_RECEIVER_ID_LIST
|
0x724
|
HDCP_SET_SPRIME
|
0x728
|
HDCP_SET_ENC_INPUT_BUFFER
|
0x72C
|
HDCP_SET_ENC_OUTPUT_BUFFER
|
0x730
|
HDCP_GET_RTT_CHALLENGE
|
0x734
|
HDCP_STREAM_MANAGE
|
0x738
|
HDCP_READ_CAPS
|
0x73C
|
HDCP_ENCRYPT
|
0x740
|
[6.0.0+] HDCP_GET_CURRENT_NONCE
|
0x1114
|
PM_TRIGGER_END
|
TSEC_THI_METHOD1
Bits
|
Description
|
0-31
|
TSEC_THI_METHOD1_DATA
|
Used to encode and send a method's data over HOST1X to TSEC. This register mirrors the functionality of HOST1X's channel opcode submission.
TSEC_THI_CONTEXT_SWITCH
Bits
|
Description
|
0-27
|
TSEC_THI_CONTEXT_SWITCH_PTR
|
30-31
|
TSEC_THI_CONTEXT_SWITCH_TARGET
|
TSEC_THI_INT_STATUS
Bits
|
Description
|
0
|
TSEC_THI_INT_STATUS_FALCON_INT
|
TSEC_THI_INT_MASK
Bits
|
Description
|
0
|
TSEC_THI_INT_MASK_FALCON_INT
|
TSEC_THI_CONFIG0
Bits
|
Description
|
0
|
TSEC_THI_CONFIG0_RETURN_SYNCPT_ON_ERR
|
4
|
TSEC_THI_CONFIG0_IDLE_SYNCPT_INC_ENG
|
TSEC_THI_DBG_MISC
Bits
|
Description
|
0
|
TSEC_THI_DBG_MISC_CLIENT_IDLE_STATUS
|
1
|
TSEC_THI_DBG_MISC_THI_IDLE_STATUS
|
2
|
TSEC_THI_DBG_MISC_THI_SYNCPT_PENDING_STATUS
|
3
|
TSEC_THI_DBG_MISC_THI_IDLE_EN
|
TSEC_THI_SLCG_OVERRIDE_HIGH_A
Bits
|
Description
|
0-7
|
TSEC_THI_SLCG_OVERRIDE_HIGH_A_REG
|
TSEC_THI_SLCG_OVERRIDE_LOW_A
Bits
|
Description
|
0-31
|
TSEC_THI_SLCG_OVERRIDE_LOW_A_REG
|
TSEC_THI_CLK_OVERRIDE
Bits
|
Description
|
0-31
|
TSEC_THI_CLK_OVERRIDE_CYA
|
TSEC_FALCON_IRQSSET
Bits
|
Description
|
0
|
TSEC_FALCON_IRQSSET_GPTMR
|
1
|
TSEC_FALCON_IRQSSET_WDTMR
|
2
|
TSEC_FALCON_IRQSSET_MTHD
|
3
|
TSEC_FALCON_IRQSSET_CTXSW
|
4
|
TSEC_FALCON_IRQSSET_HALT
|
5
|
TSEC_FALCON_IRQSSET_EXTERR
|
6
|
TSEC_FALCON_IRQSSET_SWGEN0
|
7
|
TSEC_FALCON_IRQSSET_SWGEN1
|
8-15
|
TSEC_FALCON_IRQSSET_EXT
|
16
|
TSEC_FALCON_IRQSSET_DMA
|
Used for setting Falcon's IRQs.
TSEC_FALCON_IRQSCLR
Bits
|
Description
|
0
|
TSEC_FALCON_IRQSCLR_GPTMR
|
1
|
TSEC_FALCON_IRQSCLR_WDTMR
|
2
|
TSEC_FALCON_IRQSCLR_MTHD
|
3
|
TSEC_FALCON_IRQSCLR_CTXSW
|
4
|
TSEC_FALCON_IRQSCLR_HALT
|
5
|
TSEC_FALCON_IRQSCLR_EXTERR
|
6
|
TSEC_FALCON_IRQSCLR_SWGEN0
|
7
|
TSEC_FALCON_IRQSCLR_SWGEN1
|
8-15
|
TSEC_FALCON_IRQSCLR_EXT
|
16
|
TSEC_FALCON_IRQSCLR_DMA
|
Used for clearing Falcon's IRQs.
TSEC_FALCON_IRQSTAT
Bits
|
Description
|
0
|
TSEC_FALCON_IRQSTAT_GPTMR
|
1
|
TSEC_FALCON_IRQSTAT_WDTMR
|
2
|
TSEC_FALCON_IRQSTAT_MTHD
|
3
|
TSEC_FALCON_IRQSTAT_CTXSW
|
4
|
TSEC_FALCON_IRQSTAT_HALT
|
5
|
TSEC_FALCON_IRQSTAT_EXTERR
|
6
|
TSEC_FALCON_IRQSTAT_SWGEN0
|
7
|
TSEC_FALCON_IRQSTAT_SWGEN1
|
8-15
|
TSEC_FALCON_IRQSTAT_EXT
|
16
|
TSEC_FALCON_IRQSTAT_DMA
|
Used for getting the status of Falcon's IRQs.
TSEC_FALCON_IRQMODE
Bits
|
Description
|
0
|
TSEC_FALCON_IRQMODE_LVL_GPTMR
|
1
|
TSEC_FALCON_IRQMODE_LVL_WDTMR
|
2
|
TSEC_FALCON_IRQMODE_LVL_MTHD
|
3
|
TSEC_FALCON_IRQMODE_LVL_CTXSW
|
4
|
TSEC_FALCON_IRQMODE_LVL_HALT
|
5
|
TSEC_FALCON_IRQMODE_LVL_EXTERR
|
6
|
TSEC_FALCON_IRQMODE_LVL_SWGEN0
|
7
|
TSEC_FALCON_IRQMODE_LVL_SWGEN1
|
8-15
|
TSEC_FALCON_IRQMODE_LVL_EXT
|
16
|
TSEC_FALCON_IRQMODE_LVL_DMA
|
Used for changing the mode Falcon's IRQs. A value of 1 means level triggered while a value of 0 means edge triggered.
TSEC_FALCON_IRQMSET
Bits
|
Description
|
0
|
TSEC_FALCON_IRQMSET_GPTMR
|
1
|
TSEC_FALCON_IRQMSET_WDTMR
|
2
|
TSEC_FALCON_IRQMSET_MTHD
|
3
|
TSEC_FALCON_IRQMSET_CTXSW
|
4
|
TSEC_FALCON_IRQMSET_HALT
|
5
|
TSEC_FALCON_IRQMSET_EXTERR
|
6
|
TSEC_FALCON_IRQMSET_SWGEN0
|
7
|
TSEC_FALCON_IRQMSET_SWGEN1
|
8-15
|
TSEC_FALCON_IRQMSET_EXT
|
16
|
TSEC_FALCON_IRQMSET_DMA
|
Used for setting the mask for Falcon's IRQs.
TSEC_FALCON_IRQMCLR
Bits
|
Description
|
0
|
TSEC_FALCON_IRQMCLR_GPTMR
|
1
|
TSEC_FALCON_IRQMCLR_WDTMR
|
2
|
TSEC_FALCON_IRQMCLR_MTHD
|
3
|
TSEC_FALCON_IRQMCLR_CTXSW
|
4
|
TSEC_FALCON_IRQMCLR_HALT
|
5
|
TSEC_FALCON_IRQMCLR_EXTERR
|
6
|
TSEC_FALCON_IRQMCLR_SWGEN0
|
7
|
TSEC_FALCON_IRQMCLR_SWGEN1
|
8-15
|
TSEC_FALCON_IRQMCLR_EXT
|
16
|
TSEC_FALCON_IRQMCLR_DMA
|
Used for clearing the mask for Falcon's IRQs.
TSEC_FALCON_IRQMASK
Bits
|
Description
|
0
|
TSEC_FALCON_IRQMASK_GPTMR
|
1
|
TSEC_FALCON_IRQMASK_WDTMR
|
2
|
TSEC_FALCON_IRQMASK_MTHD
|
3
|
TSEC_FALCON_IRQMASK_CTXSW
|
4
|
TSEC_FALCON_IRQMASK_HALT
|
5
|
TSEC_FALCON_IRQMASK_EXTERR
|
6
|
TSEC_FALCON_IRQMASK_SWGEN0
|
7
|
TSEC_FALCON_IRQMASK_SWGEN1
|
8-15
|
TSEC_FALCON_IRQMASK_EXT
|
16
|
TSEC_FALCON_IRQMASK_DMA
|
Used for getting the value of the mask for Falcon's IRQs.
TSEC_FALCON_IRQDEST
Bits
|
Description
|
0
|
TSEC_FALCON_IRQDEST_HOST_GPTMR
|
1
|
TSEC_FALCON_IRQDEST_HOST_WDTMR
|
2
|
TSEC_FALCON_IRQDEST_HOST_MTHD
|
3
|
TSEC_FALCON_IRQDEST_HOST_CTXSW
|
4
|
TSEC_FALCON_IRQDEST_HOST_HALT
|
5
|
TSEC_FALCON_IRQDEST_HOST_EXTERR
|
6
|
TSEC_FALCON_IRQDEST_HOST_SWGEN0
|
7
|
TSEC_FALCON_IRQDEST_HOST_SWGEN1
|
8-15
|
TSEC_FALCON_IRQDEST_HOST_EXT
|
16
|
TSEC_FALCON_IRQDEST_TARGET_GPTMR
|
17
|
TSEC_FALCON_IRQDEST_TARGET_WDTMR
|
18
|
TSEC_FALCON_IRQDEST_TARGET_MTHD
|
19
|
TSEC_FALCON_IRQDEST_TARGET_CTXSW
|
20
|
TSEC_FALCON_IRQDEST_TARGET_HALT
|
21
|
TSEC_FALCON_IRQDEST_TARGET_EXTERR
|
22
|
TSEC_FALCON_IRQDEST_TARGET_SWGEN0
|
23
|
TSEC_FALCON_IRQDEST_TARGET_SWGEN1
|
24-31
|
TSEC_FALCON_IRQDEST_TARGET_EXT
|
Used for routing Falcon's IRQs.
TSEC_FALCON_GPTMRINT
Bits
|
Description
|
0-31
|
TSEC_FALCON_GPTMRINT_VAL
|
TSEC_FALCON_GPTMRVAL
Bits
|
Description
|
0-31
|
TSEC_FALCON_GPTMRVAL_VAL
|
TSEC_FALCON_GPTMRCTL
Bits
|
Description
|
0
|
TSEC_FALCON_GPTMRCTL_GPTMREN
|
TSEC_FALCON_PTIMER0
Bits
|
Description
|
0-31
|
TSEC_FALCON_PTIMER0_VAL
|
TSEC_FALCON_PTIMER1
Bits
|
Description
|
0-31
|
TSEC_FALCON_PTIMER1_VAL
|
TSEC_FALCON_WDTMRVAL
Bits
|
Description
|
0-31
|
TSEC_FALCON_WDTMRVAL_VAL
|
TSEC_FALCON_WDTMRCTL
Bits
|
Description
|
0
|
TSEC_FALCON_WDTMRCTL_WDTMREN
|
TSEC_FALCON_IRQDEST2
Bits
|
Description
|
0
|
TSEC_FALCON_IRQDEST2_HOST_DMA
|
16
|
TSEC_FALCON_IRQDEST2_TARGET_DMA
|
Used for routing Falcon's IRQs.
TSEC_FALCON_MAILBOX0
Bits
|
Description
|
0-31
|
TSEC_FALCON_MAILBOX0_DATA
|
Scratch register for reading/writing data to Falcon.
TSEC_FALCON_MAILBOX1
Bits
|
Description
|
0-31
|
TSEC_FALCON_MAILBOX1_DATA
|
Scratch register for reading/writing data to Falcon.
TSEC_FALCON_ITFEN
Bits
|
Description
|
0
|
TSEC_FALCON_ITFEN_CTXEN
|
1
|
TSEC_FALCON_ITFEN_MTHDEN
|
Used for enabling/disabling Falcon interfaces.
TSEC_FALCON_IDLESTATE
Bits
|
Description
|
0
|
TSEC_FALCON_IDLESTATE_FALCON_BUSY
|
1-15
|
TSEC_FALCON_IDLESTATE_EXT_BUSY
|
Used for detecting if Falcon is busy or not.
TSEC_FALCON_CURCTX
Bits
|
Description
|
0-27
|
TSEC_FALCON_CURCTX_CTXPTR
|
28-29
|
TSEC_FALCON_CURCTX_CTXTGT
|
30
|
TSEC_FALCON_CURCTX_CTXVLD
|
TSEC_FALCON_NXTCTX
Bits
|
Description
|
0-27
|
TSEC_FALCON_NXTCTX_CTXPTR
|
28-29
|
TSEC_FALCON_NXTCTX_CTXTGT
|
30
|
TSEC_FALCON_NXTCTX_CTXVLD
|
TSEC_FALCON_CTXACK
Bits
|
Description
|
0
|
TSEC_FALCON_CTXACK_SAVE_ACK
|
1
|
TSEC_FALCON_CTXACK_REST_ACK
|
TSEC_FALCON_FHSTATE
Bits
|
Description
|
0
|
TSEC_FALCON_FHSTATE_FALCON_HALTED
|
1-15
|
TSEC_FALCON_FHSTATE_EXT_HALTED
|
16
|
TSEC_FALCON_FHSTATE_ENGINE_FAULTED
|
17
|
TSEC_FALCON_FHSTATE_STALL_REQ
|
TSEC_FALCON_PRIVSTATE
Bits
|
Description
|
0
|
TSEC_FALCON_PRIVSTATE_PRIV
|
TSEC_FALCON_MTHDDATA
Bits
|
Description
|
0-31
|
TSEC_FALCON_MTHDDATA_DATA
|
TSEC_FALCON_MTHDID
Bits
|
Description
|
0-11
|
TSEC_FALCON_MTHDID_ID
|
12-14
|
TSEC_FALCON_MTHDID_SUBCH
|
15
|
TSEC_FALCON_MTHDID_PRIV
|
16
|
TSEC_FALCON_MTHDID_WPEND
|
TSEC_FALCON_MTHDWDAT
Bits
|
Description
|
0-31
|
TSEC_FALCON_MTHDWDAT_DATA
|
TSEC_FALCON_MTHDCOUNT
Bits
|
Description
|
0-15
|
TSEC_FALCON_MTHDCOUNT_COUNT
|
TSEC_FALCON_MTHDPOP
Bits
|
Description
|
0
|
TSEC_FALCON_MTHDPOP_POP
|
TSEC_FALCON_MTHDRAMSZ
Bits
|
Description
|
0-15
|
TSEC_FALCON_MTHDRAMSZ_RAMSZ
|
TSEC_FALCON_SFTRESET
Bits
|
Description
|
0
|
TSEC_FALCON_SFTRESET_EXT
|
TSEC_FALCON_OS
Bits
|
Description
|
0-31
|
TSEC_FALCON_OS_VERSION
|
TSEC_FALCON_RM
Bits
|
Description
|
0-31
|
TSEC_FALCON_RM_CONFIG
|
TSEC_FALCON_SOFT_PM
Bits
|
Description
|
0-5
|
TSEC_FALCON_SOFT_PM_PROBE
|
16
|
TSEC_FALCON_SOFT_PM_TRIGGER_END
|
17
|
TSEC_FALCON_SOFT_PM_TRIGGER_START
|
TSEC_FALCON_SOFT_MODE
Bits
|
Description
|
0-5
|
TSEC_FALCON_SOFT_MODE_PROBE
|
TSEC_FALCON_DEBUG1
Bits
|
Description
|
0-15
|
TSEC_FALCON_DEBUG1_MTHD_DRAIN_TIME
|
16
|
TSEC_FALCON_DEBUG1_CTXSW_MODE
|
17
|
TSEC_FALCON_DEBUG1_TRACE_FORMAT
|
TSEC_FALCON_DEBUGINFO
Bits
|
Description
|
0-31
|
TSEC_FALCON_DEBUGINFO_DATA
|
Used for UCODE self revocation. This register takes the base address of the GSC carveout shifted right by 8.
[6.0.0+] nvservices sets this to 0x8005FF00 >> 8 (physical DRAM address inside the GPU UCODE carveout) before starting the nvhost_tsec firmware.
TSEC_FALCON_IBRKPT1
Bits
|
Description
|
0-23
|
TSEC_FALCON_IBRKPT1_PC
|
29
|
TSEC_FALCON_IBRKPT1_SUPPRESS
|
30
|
TSEC_FALCON_IBRKPT1_SKIP
|
31
|
TSEC_FALCON_IBRKPT1_EN
|
TSEC_FALCON_IBRKPT2
Bits
|
Description
|
0-23
|
TSEC_FALCON_IBRKPT2_PC
|
29
|
TSEC_FALCON_IBRKPT2_SUPPRESS
|
30
|
TSEC_FALCON_IBRKPT2_SKIP
|
31
|
TSEC_FALCON_IBRKPT2_EN
|
TSEC_FALCON_CGCTL
Bits
|
Description
|
0
|
TSEC_FALCON_CGCTL_CG_OVERRIDE
|
TSEC_FALCON_ENGCTL
Bits
|
Description
|
0
|
TSEC_FALCON_ENGCTL_INV_CONTEXT
|
1
|
TSEC_FALCON_ENGCTL_SET_STALLREQ
|
2
|
TSEC_FALCON_ENGCTL_CLR_STALLREQ
|
3
|
TSEC_FALCON_ENGCTL_SWITCH_CONTEXT
|
8
|
TSEC_FALCON_ENGCTL_STALLREQ
|
9
|
TSEC_FALCON_ENGCTL_STALLACK
|
TSEC_FALCON_PMM
Bits
|
Description
|
0-4
|
TSEC_FALCON_PMM_FALCON_STALL_SEL
0x00: ANY
0x01: CODE
0x02: DMAQ
0x03: DMFENCE
0x04: DMWAIT
0x05: IMWAIT
0x06: IPND
0x07: LDSTQ
0x08: SB
0x09: ANY_SC
0x0A: CODE_SC
0x0B: DMAQ_SC
0x0C: DMFENCE_SC
0x0D: DMWAIT_SC
0x0E: IMWAIT_SC
0x0F: IPND_SC
0x10: LDSTQ_SC
0x11: SB_SC
|
5-7
|
TSEC_FALCON_PMM_FALCON_IDLE_SEL
0x00: WAITING
0x01: ENG_IDLE
0x02: MTHD_FULL
0x03: WAITING_SC
0x04: ENG_IDLE_SC
0x05: MTHD_FULL_SC
|
8-11
|
TSEC_FALCON_PMM_FALCON_SOFTPM0_SEL
0x00: 0
0x01: 1
0x02: 2
0x03: 3
0x04: 4
0x05: 5
0x06: 0_SC
0x07: 1_SC
0x08: 2_SC
0x09: 3_SC
0x0A: 4_SC
0x0B: 5_SC
|
12-15
|
TSEC_FALCON_PMM_FALCON_SOFTPM1_SEL
0x00: 0
|
17-19
|
TSEC_FALCON_PMM_TFBIF_DSTAT_SEL
0x00: 1KTRANSFER
0x01: RREQ
0x02: WREQ
0x03: TWREQ
0x04: 1KTRANSFER_SC
0x05: RREQ_SC
0x06: WREQ_SC
0x07: TWREQ_SC
|
20-23
|
TSEC_FALCON_PMM_TFBIF_STALL0_SEL
0x00: RDATQ_FULL
0x01: RACKQ_FULL
0x02: WREQQ_FULL
0x03: WDATQ_FULL
0x04: WACKQ_FULL
0x05: MREQQ_FULL
0x06: RREQ_PEND
0x07: WREQ_PEND
0x08: RDATQ_FULL_SC
0x09: RACKQ_FULL_SC
0x0A: WREQQ_FULL_SC
0x0B: WDATQ_FULL_SC
0x0C: WACKQ_FULL_SC
0x0D: MREQQ_FULL_SC
0x0E: RREQ_PEND_SC
0x0F: WREQ_PEND_SC
|
24-27
|
TSEC_FALCON_PMM_TFBIF_STALL1_SEL
0x00: RDATQ_FULL
|
28-31
|
TSEC_FALCON_PMM_TFBIF_STALL2_SEL
0x00: RDATQ_FULL
|
TSEC_FALCON_ADDR
Bits
|
Description
|
0-5
|
TSEC_FALCON_ADDR_LSB
|
6-11
|
TSEC_FALCON_ADDR_MSB
|
TSEC_FALCON_IBRKPT3
Bits
|
Description
|
0-23
|
TSEC_FALCON_IBRKPT3_PC
|
29
|
TSEC_FALCON_IBRKPT3_SUPPRESS
|
30
|
TSEC_FALCON_IBRKPT3_SKIP
|
31
|
TSEC_FALCON_IBRKPT3_EN
|
TSEC_FALCON_IBRKPT4
Bits
|
Description
|
0-23
|
TSEC_FALCON_IBRKPT4_PC
|
29
|
TSEC_FALCON_IBRKPT4_SUPPRESS
|
30
|
TSEC_FALCON_IBRKPT4_SKIP
|
31
|
TSEC_FALCON_IBRKPT4_EN
|
TSEC_FALCON_IBRKPT5
Bits
|
Description
|
0-23
|
TSEC_FALCON_IBRKPT5_PC
|
29
|
TSEC_FALCON_IBRKPT5_SUPPRESS
|
30
|
TSEC_FALCON_IBRKPT5_SKIP
|
31
|
TSEC_FALCON_IBRKPT5_EN
|
TSEC_FALCON_EXCI
Bits
|
Description
|
0-19
|
TSEC_FALCON_EXCI_EXPC
|
20-23
|
TSEC_FALCON_EXCI_EXCAUSE
0x00: TRAP0
0x01: TRAP1
0x02: TRAP2
0x03: TRAP3
0x08: ILL_INS (invalid opcode)
0x09: INV_INS (authentication entry)
0x0A: MISS_INS (page miss)
0x0B: DHIT_INS (page multiple hit)
0x0F: BRKPT_INS (breakpoint hit)
|
Contains information about raised exceptions.
TSEC_FALCON_SVEC_SPR
Bits
|
Description
|
18
|
TSEC_FALCON_SVEC_SPR_SIGPASS
|
TSEC_FALCON_RSTAT0
Mirror of the ICD status register 0.
TSEC_FALCON_RSTAT3
Mirror of the ICD status register 3.
TSEC_FALCON_CPUCTL
Bits
|
Description
|
0
|
TSEC_FALCON_CPUCTL_IINVAL
|
1
|
TSEC_FALCON_CPUCTL_STARTCPU
|
2
|
TSEC_FALCON_CPUCTL_SRESET
|
3
|
TSEC_FALCON_CPUCTL_HRESET
|
4
|
TSEC_FALCON_CPUCTL_HALTED
|
5
|
TSEC_FALCON_CPUCTL_STOPPED
|
6
|
TSEC_FALCON_CPUCTL_ALIAS_EN
|
Used for signaling the Falcon CPU.
TSEC_FALCON_BOOTVEC
Bits
|
Description
|
0-31
|
TSEC_FALCON_BOOTVEC_VEC
|
Takes the Falcon's boot vector address.
TSEC_FALCON_HWCFG
Bits
|
Description
|
0-8
|
TSEC_FALCON_HWCFG_IMEM_SIZE
|
9-17
|
TSEC_FALCON_HWCFG_DMEM_SIZE
|
18-26
|
TSEC_FALCON_HWCFG_METHODFIFO_DEPTH
|
27-31
|
TSEC_FALCON_HWCFG_DMAQUEUE_DEPTH
|
TSEC_FALCON_DMACTL
Bits
|
Description
|
0
|
TSEC_FALCON_DMACTL_REQUIRE_CTX
|
1
|
TSEC_FALCON_DMACTL_DMEM_SCRUBBING
|
2
|
TSEC_FALCON_DMACTL_IMEM_SCRUBBING
|
3-6
|
TSEC_FALCON_DMACTL_DMAQ_NUM
|
7
|
TSEC_FALCON_DMACTL_SECURE_STAT
|
Used for configuring the Falcon's DMA engine.
TSEC_FALCON_DMATRFBASE
Bits
|
Description
|
0-31
|
TSEC_FALCON_DMATRFBASE_BASE
|
Base address of the external memory buffer, shifted right by 8.
The current transfer address is calculated by adding TSEC_FALCON_DMATRFFBOFFS to the base.
TSEC_FALCON_DMATRFMOFFS
Bits
|
Description
|
0-15
|
TSEC_FALCON_DMATRFMOFFS_OFFS
|
For transfers to DMEM: the destination address.
For transfers to IMEM: the destination virtual IMEM page.
TSEC_FALCON_DMATRFCMD
Bits
|
Description
|
0
|
TSEC_FALCON_DMATRFCMD_FULL
|
1
|
TSEC_FALCON_DMATRFCMD_IDLE
|
2-3
|
TSEC_FALCON_DMATRFCMD_SEC
|
4
|
TSEC_FALCON_DMATRFCMD_IMEM
|
5
|
TSEC_FALCON_DMATRFCMD_WRITE
|
8-10
|
TSEC_FALCON_DMATRFCMD_SIZE
|
12-14
|
TSEC_FALCON_DMATRFCMD_CTXDMA
|
Used for configuring DMA transfers.
TSEC_FALCON_DMATRFFBOFFS
Bits
|
Description
|
0-31
|
TSEC_FALCON_DMATRFFBOFFS_OFFS
|
For transfers to IMEM: the destination physical IMEM page.
TSEC_FALCON_DMAPOLL_FB
Bits
|
Description
|
0
|
TSEC_FALCON_DMAPOLL_FB_FENCE_ACTIVE
|
1
|
TSEC_FALCON_DMAPOLL_FB_DMA_ACTIVE
|
4
|
TSEC_FALCON_DMAPOLL_FB_CFG_R_FENCE
|
5
|
TSEC_FALCON_DMAPOLL_FB_CFG_W_FENCE
|
16-23
|
TSEC_FALCON_DMAPOLL_FB_WCOUNT
|
24-31
|
TSEC_FALCON_DMAPOLL_FB_RCOUNT
|
Contains the status of a DMA transfer between the Falcon and external memory.
TSEC_FALCON_DMAPOLL_CP
Bits
|
Description
|
0
|
TSEC_FALCON_DMAPOLL_CP_FENCE_ACTIVE
|
1
|
TSEC_FALCON_DMAPOLL_CP_DMA_ACTIVE
|
4
|
TSEC_FALCON_DMAPOLL_CP_CFG_R_FENCE
|
5
|
TSEC_FALCON_DMAPOLL_CP_CFG_W_FENCE
|
16-23
|
TSEC_FALCON_DMAPOLL_CP_WCOUNT
|
24-31
|
TSEC_FALCON_DMAPOLL_CP_RCOUNT
|
Contains the status of a DMA transfer between the Falcon and the SCP.
TSEC_FALCON_HWCFG1
Bits
|
Description
|
0-3
|
TSEC_FALCON_HWCFG1_CORE_REV
|
4-5
|
TSEC_FALCON_HWCFG1_SECURITY_MODEL
|
6-7
|
TSEC_FALCON_HWCFG1_CORE_REV_SUBVERSION
|
8-11
|
TSEC_FALCON_HWCFG1_IMEM_PORTS
|
12-15
|
TSEC_FALCON_HWCFG1_DMEM_PORTS
|
16-20
|
TSEC_FALCON_HWCFG1_TAG_WIDTH
|
27
|
TSEC_FALCON_HWCFG1_DBG_PRIV_BUS
|
28
|
TSEC_FALCON_HWCFG1_CSB_SIZE_16M
|
29
|
TSEC_FALCON_HWCFG1_PRIV_DIRECT
|
30
|
TSEC_FALCON_HWCFG1_DMEM_APERTURES
|
31
|
TSEC_FALCON_HWCFG1_IMEM_AUTOFILL
|
TSEC_FALCON_CPUCTL_ALIAS
Bits
|
Description
|
1
|
TSEC_FALCON_CPUCTL_ALIAS_STARTCPU
|
TSEC_FALCON_STACKCFG
Bits
|
Description
|
0-15
|
TSEC_FALCON_STACKCFG_BOTTOM
|
31
|
TSEC_FALCON_STACKCFG_SPEXC
|
TSEC_FALCON_IMCTL
Bits
|
Description
|
0-23
|
TSEC_FALCON_IMCTL_ADDR_BLK
|
24-26
|
TSEC_FALCON_IMCTL_CMD
0x00: NOP
0x01: IMINV (ITLB)
0x02: IMBLK (PTLB)
0x03: IMTAG (VTLB)
0x04: IMTAG_SETVLD
|
Controls the Falcon TLB.
TSEC_FALCON_IMSTAT
Bits
|
Description
|
0-31
|
TSEC_FALCON_IMSTAT_VAL
|
Returns the result of the last command from TSEC_FALCON_IMCTL.
TSEC_FALCON_TRACEIDX
Bits
|
Description
|
0-7
|
TSEC_FALCON_TRACEIDX_IDX
|
16-23
|
TSEC_FALCON_TRACEIDX_MAXIDX
|
24-31
|
TSEC_FALCON_TRACEIDX_CNT
|
Controls the index for tracing with TSEC_FALCON_TRACEPC.
TSEC_FALCON_TRACEPC
Bits
|
Description
|
0-23
|
TSEC_FALCON_TRACEPC_PC
|
Returns the PC of the last call or branch executed.
TSEC_FALCON_IMFILLRNG0
Bits
|
Description
|
0-15
|
TSEC_FALCON_IMFILLRNG0_TAG_LO
|
16-31
|
TSEC_FALCON_IMFILLRNG0_TAG_HI
|
TSEC_FALCON_IMFILLRNG1
Bits
|
Description
|
0-15
|
TSEC_FALCON_IMFILLRNG1_TAG_LO
|
16-31
|
TSEC_FALCON_IMFILLRNG1_TAG_HI
|
TSEC_FALCON_IMFILLCTL
Bits
|
Description
|
0-7
|
TSEC_FALCON_IMFILLCTL_NBLOCKS
|
TSEC_FALCON_IMCTL_DEBUG
Bits
|
Description
|
0-23
|
TSEC_FALCON_IMCTL_DEBUG_ADDR_BLK
|
24-26
|
TSEC_FALCON_IMCTL_DEBUG_CMD
0x00: NOP
0x02: IMBLK
0x03: IMTAG
|
TSEC_FALCON_CMEMBASE
Bits
|
Description
|
18-31
|
TSEC_FALCON_CMEMBASE_VAL
|
TSEC_FALCON_DMEMAPERT
Bits
|
Description
|
0-7
|
TSEC_FALCON_DMEMAPERT_TIME_OUT
|
8-11
|
TSEC_FALCON_DMEMAPERT_TIME_UNIT
|
16
|
TSEC_FALCON_DMEMAPERT_ENABLE
|
17-19
|
TSEC_FALCON_DMEMAPERT_LDSTQ_NUM
|
TSEC_FALCON_EXTERRADDR
Bits
|
Description
|
0-31
|
TSEC_FALCON_EXTERRADDR_ADDR
|
TSEC_FALCON_EXTERRSTAT
Bits
|
Description
|
0-23
|
TSEC_FALCON_EXTERRSTAT_PC
|
24-27
|
TSEC_FALCON_EXTERRSTAT_STAT
|
31
|
TSEC_FALCON_EXTERRSTAT_VALID
|
TSEC_FALCON_CG2
Bits
|
Description
|
1
|
TSEC_FALCON_CG2_SLCG_FALCON_DMA
|
2
|
TSEC_FALCON_CG2_SLCG_FALCON_GC6_SR_FSM
|
3
|
TSEC_FALCON_CG2_SLCG_FALCON_PIPE
|
4
|
TSEC_FALCON_CG2_SLCG_FALCON_DIV
|
5
|
TSEC_FALCON_CG2_SLCG_FALCON_ICD
|
6
|
TSEC_FALCON_CG2_SLCG_FALCON_CFG
|
7
|
TSEC_FALCON_CG2_SLCG_FALCON_CTXSW
|
8
|
TSEC_FALCON_CG2_SLCG_FALCON_PMB
|
9
|
TSEC_FALCON_CG2_SLCG_FALCON_RF
|
10
|
TSEC_FALCON_CG2_SLCG_FALCON_MUL
|
11
|
TSEC_FALCON_CG2_SLCG_FALCON_LDST
|
12
|
TSEC_FALCON_CG2_SLCG_FALCON_TSYNC
|
13
|
TSEC_FALCON_CG2_SLCG_FALCON_GPTMR
|
14
|
TSEC_FALCON_CG2_SLCG_FALCON_WDTMR
|
15
|
TSEC_FALCON_CG2_SLCG_FALCON_IRQSTAT
|
16
|
TSEC_FALCON_CG2_SLCG_FALCON_TOP
|
17
|
TSEC_FALCON_CG2_SLCG_FBIF
|
TSEC_FALCON_IMEMC
Bits
|
Description
|
2-7
|
TSEC_FALCON_IMEMC_OFFS
|
8-15
|
TSEC_FALCON_IMEMC_BLK
|
24
|
TSEC_FALCON_IMEMC_AINCW
|
25
|
TSEC_FALCON_IMEMC_AINCR
|
28
|
TSEC_FALCON_IMEMC_SECURE
|
29
|
TSEC_FALCON_IMEMC_SEC_ATOMIC
|
30
|
TSEC_FALCON_IMEMC_SEC_WR_VIO
|
31
|
TSEC_FALCON_IMEMC_SEC_LOCK
|
Used for configuring access to Falcon's IMEM.
TSEC_FALCON_IMEMD
Bits
|
Description
|
0-31
|
TSEC_FALCON_IMEMD_DATA
|
Returns or takes the value for an IMEM read/write operation.
TSEC_FALCON_IMEMT
Bits
|
Description
|
0-15
|
TSEC_FALCON_IMEMT_TAG
|
Returns or takes the virtual page index for an IMEM read/write operation.
TSEC_FALCON_DMEMC
Bits
|
Description
|
2-7
|
TSEC_FALCON_DMEMC_OFFS
|
8-15
|
TSEC_FALCON_DMEMC_BLK
|
24
|
TSEC_FALCON_DMEMC_AINCW
|
25
|
TSEC_FALCON_DMEMC_AINCR
|
Used for configuring access to Falcon's DMEM.
TSEC_FALCON_DMEMD
Bits
|
Description
|
0-31
|
TSEC_FALCON_DMEMD_DATA
|
Returns or takes the value for a DMEM read/write operation.
TSEC_FALCON_ICD_CMD
Bits
|
Description
|
0-3
|
TSEC_FALCON_ICD_CMD_OPC
0x00: STOP
0x01: RUN (run from PC)
0x02: JRUN (run from address)
0x03: RUNB (run from PC)
0x04: JRUNB (run from address)
0x05: STEP (step from PC)
0x06: JSTEP (step from address)
0x07: EMASK (set exception mask)
0x08: RREG (read register)
0x09: WREG (write register)
0x0A: RDM (read data memory)
0x0B: WDM (write data memory)
0x0C: RCM (read MMIO/configuration memory)
0x0D: WCM (write MMIO/configuration memory)
0x0E: RSTAT (read status)
0x0F: SBU (store buffer update)
|
6-7
|
TSEC_FALCON_ICD_CMD_SZ
0x00: B (byte)
0x01: HW (half word)
0x02: W (word)
|
8-12
|
TSEC_FALCON_ICD_CMD_IDX
0x00: REG0 | RSTAT0 | WB0
0x01: REG1 | RSTAT1 | WB1
0x02: REG2 | RSTAT2 | WB2
0x03: REG3 | RSTAT3 | WB3
0x04: REG4 | RSTAT4
0x05: REG5 | RSTAT5
0x06: REG6
0x07: REG7
0x08: REG8
0x09: REG9
0x0A: REG10
0x0B: REG11
0x0C: REG12
0x0D: REG13
0x0E: REG14
0x0F: REG15
0x10: IV0
0x11: IV1
0x12: UNDEFINED
0x13: EV
0x14: SP
0x15: PC
0x16: IMB
0x17: DMB
0x18: CSW
0x19: CCR
0x1A: SEC
0x1B: CTX
0x1C: EXCI
0x1D: SEC1
0x1E: IMB1
0x1F: DMB1
|
14
|
TSEC_FALCON_ICD_CMD_ERROR
|
15
|
TSEC_FALCON_ICD_CMD_RDVLD
|
16-31
|
TSEC_FALCON_ICD_CMD_PARM
0x0001: EMASK_TRAP0
0x0002: EMASK_TRAP1
0x0004: EMASK_TRAP2
0x0008: EMASK_TRAP3
0x0010: EMASK_EXC_UNIMP
0x0020: EMASK_EXC_IMISS
0x0040: EMASK_EXC_IMHIT
0x0080: EMASK_EXC_IBREAK
0x0100: EMASK_IV0
0x0200: EMASK_IV1
0x0400: EMASK_IV2
0x0800: EMASK_EXT0
0x1000: EMASK_EXT1
0x2000: EMASK_EXT2
0x4000: EMASK_EXT3
0x8000: EMASK_EXT4
|
Used for sending commands to the Falcon's in-chip debugger.
TSEC_FALCON_ICD_ADDR
Bits
|
Description
|
0-31
|
TSEC_FALCON_ICD_ADDR_ADDR
|
Takes the target address for the Falcon's in-chip debugger.
TSEC_FALCON_ICD_WDATA
Bits
|
Description
|
0-31
|
TSEC_FALCON_ICD_WDATA_DATA
|
Takes the data for writing using the Falcon's in-chip debugger.
TSEC_FALCON_ICD_RDATA
Bits
|
Description
|
0-31
|
TSEC_FALCON_ICD_RDATA_DATA
|
Returns the data read using the Falcon's in-chip debugger.
When reading from an internal status register (STAT), the following applies:
Bits
|
Description
|
0
|
RSTAT0_MEM_STALL
|
1
|
RSTAT0_DMA_STALL
|
2
|
RSTAT0_FENCE_STALL
|
3
|
RSTAT0_DIV_STALL
|
4
|
RSTAT0_DMA_STALL_DMAQ
|
5
|
RSTAT0_DMA_STALL_DMWAITING
|
6
|
RSTAT0_DMA_STALL_IMWAITING
|
7
|
RSTAT0_ANY_STALL
|
8
|
RSTAT0_SBFULL_STALL
|
9
|
RSTAT0_SBHIT_STALL
|
10
|
RSTAT0_FLOW_STALL
|
11
|
RSTAT0_SP_STALL
|
12
|
RSTAT0_BL_STALL
|
13
|
RSTAT0_IPND_STALL
|
14
|
RSTAT0_LDSTQ_STALL
|
16
|
RSTAT0_NOINSTR_STALL
|
20
|
RSTAT0_HALTSTOP_FLUSH
|
21
|
RSTAT0_AFILL_FLUSH
|
22
|
RSTAT0_EXC_FLUSH
|
23-25
|
RSTAT0_IRQ_FLUSH
|
28
|
RSTAT0_VALIDRD
|
29
|
RSTAT0_WAITING
|
30
|
RSTAT0_HALTED
|
31
|
RSTAT0_MTHD_FULL
|
Bits
|
Description
|
0-3
|
RSTAT1_WB_ALLOC
|
4-7
|
RSTAT1_WB_VALID
|
8-9
|
RSTAT1_WB0_SZ
|
10-11
|
RSTAT1_WB1_SZ
|
12-13
|
RSTAT1_WB2_SZ
|
14-15
|
RSTAT1_WB3_SZ
|
16-19
|
RSTAT1_WB0_IDX
|
20-23
|
RSTAT1_WB1_IDX
|
24-27
|
RSTAT1_WB2_IDX
|
28-31
|
RSTAT1_WB3_IDX
|
Bits
|
Description
|
0-3
|
RSTAT2_DMAQ_NUM
|
4
|
RSTAT2_DMA_ENABLE
|
5-7
|
RSTAT2_LDSTQ_NUM
|
16-19
|
RSTAT2_EM_BUSY
|
20-23
|
RSTAT2_EM_ACKED
|
24-27
|
RSTAT2_EM_ISWR
|
28-31
|
RSTAT2_EM_DVLD
|
Bits
|
Description
|
0
|
RSTAT3_MTHD_IDLE
|
1
|
RSTAT3_CTXSW_IDLE
|
2
|
RSTAT3_DMA_IDLE
|
3
|
RSTAT3_SCP_IDLE
|
4
|
RSTAT3_LDST_IDLE
|
5
|
RSTAT3_SBWB_EMPTY
|
6-8
|
RSTAT3_CSWIE
|
10
|
RSTAT3_CSWE
|
12-14
|
RSTAT3_CTXSW_STATE
0x00: IDLE
0x01: SM_CHECK
0x02: SM_SAVE
0x03: SM_SAVE_WAIT
0x04: SM_BLK_BIND
0x05: SM_RESET
0x06: SM_RESETWAIT
0x07: SM_ACK
|
15
|
RSTAT3_CTXSW_PEND
|
17
|
RSTAT3_DMA_FBREQ_IDLE
|
18
|
RSTAT3_DMA_ACKQ_EMPTY
|
19
|
RSTAT3_DMA_RDQ_EMPTY
|
20
|
RSTAT3_DMA_WR_BUSY
|
21
|
RSTAT3_DMA_RD_BUSY
|
22
|
RSTAT3_LDST_XT_BUSY
|
23
|
RSTAT3_LDST_XT_BLOCK
|
24
|
RSTAT3_ENG_IDLE
|
Bits
|
Description
|
0-1
|
RSTAT4_ICD_STATE
0x00: NORMAL
0x01: WAIT_ISSUE_CLEAR
0x02: WAIT_EXLDQ_CLEAR
0x03: FULL_DBG_MODE
|
2-3
|
RSTAT4_ICD_MODE
0x00: SUPPRESSICD
0x01: ENTERICD_IBRK
0x02: ENTERICD_STEP
|
16
|
RSTAT4_ICD_EMASK_TRAP0
|
17
|
RSTAT4_ICD_EMASK_TRAP1
|
18
|
RSTAT4_ICD_EMASK_TRAP2
|
19
|
RSTAT4_ICD_EMASK_TRAP3
|
20
|
RSTAT4_ICD_EMASK_EXC_UNIMP
|
21
|
RSTAT4_ICD_EMASK_EXC_IMISS
|
22
|
RSTAT4_ICD_EMASK_EXC_IMHIT
|
23
|
RSTAT4_ICD_EMASK_EXC_IBREAK
|
24
|
RSTAT4_ICD_EMASK_IV0
|
25
|
RSTAT4_ICD_EMASK_IV1
|
26
|
RSTAT4_ICD_EMASK_IV2
|
27
|
RSTAT4_ICD_EMASK_EXT0
|
28
|
RSTAT4_ICD_EMASK_EXT1
|
29
|
RSTAT4_ICD_EMASK_EXT2
|
30
|
RSTAT4_ICD_EMASK_EXT3
|
31
|
RSTAT4_ICD_EMASK_EXT4
|
Bits
|
Description
|
0-7
|
RSTAT5_LRU_STATE
|
TSEC_FALCON_SCTL
Bits
|
Description
|
0
|
TSEC_FALCON_SCTL_LSMODE
|
1
|
TSEC_FALCON_SCTL_HSMODE
|
4-5
|
Unknown
|
12-13
|
Unknown
|
14
|
Initialize the transition to LS mode
|
TSEC_FALCON_SSTAT
Bits
|
Description
|
31
|
Set on memory protection violation
|
TSEC_FALCON_SPROT_IMEM
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to Falcon IMEM.
TSEC_FALCON_SPROT_DMEM
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to Falcon DMEM.
TSEC_FALCON_SPROT_CPUCTL
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to the TSEC_FALCON_CPUCTL register.
TSEC_FALCON_SPROT_MISC
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to the following registers:
TSEC_FALCON_SPROT_IRQ
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to the following registers:
TSEC_FALCON_SPROT_MTHD
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to the following registers:
TSEC_FALCON_SPROT_SCTL
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to the TSEC_FALCON_SCTL register.
TSEC_FALCON_SPROT_WDTMR
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to the following registers:
TSEC_FALCON_DMAINFO_FINISHED_FBRD_LOW
Bits
|
Description
|
0-31
|
TSEC_FALCON_DMAINFO_FINISHED_FBRD_LOW_VAL
|
TSEC_FALCON_DMAINFO_FINISHED_FBRD_HIGH
Bits
|
Description
|
0-30
|
TSEC_FALCON_DMAINFO_FINISHED_FBRD_HIGH_VAL
|
31
|
TSEC_FALCON_DMAINFO_FINISHED_FBRD_HIGH_OBIT
|
TSEC_FALCON_DMAINFO_FINISHED_FBWR_LOW
Bits
|
Description
|
0-31
|
TSEC_FALCON_DMAINFO_FINISHED_FBWR_LOW_VAL
|
TSEC_FALCON_DMAINFO_FINISHED_FBWR_HIGH
Bits
|
Description
|
0-30
|
TSEC_FALCON_DMAINFO_FINISHED_FBWR_HIGH_VAL
|
31
|
TSEC_FALCON_DMAINFO_FINISHED_FBWR_HIGH_OBIT
|
TSEC_FALCON_DMAINFO_CURRENT_FBRD_LOW
Bits
|
Description
|
0-31
|
TSEC_FALCON_DMAINFO_CURRENT_FBRD_LOW_VAL
|
TSEC_FALCON_DMAINFO_CURRENT_FBRD_HIGH
Bits
|
Description
|
0-30
|
TSEC_FALCON_DMAINFO_CURRENT_FBRD_HIGH_VAL
|
31
|
TSEC_FALCON_DMAINFO_CURRENT_FBRD_HIGH_OBIT
|
TSEC_FALCON_DMAINFO_CURRENT_FBWR_LOW
Bits
|
Description
|
0-31
|
TSEC_FALCON_DMAINFO_CURRENT_FBWR_LOW_VAL
|
TSEC_FALCON_DMAINFO_CURRENT_FBWR_HIGH
Bits
|
Description
|
0-30
|
TSEC_FALCON_DMAINFO_CURRENT_FBWR_HIGH_VAL
|
31
|
TSEC_FALCON_DMAINFO_CURRENT_FBWR_HIGH_OBIT
|
TSEC_FALCON_DMAINFO_CTL
Bits
|
Description
|
0
|
TSEC_FALCON_DMAINFO_CTL_CLR_FBRD
|
1
|
TSEC_FALCON_DMAINFO_CTL_CLR_FBWR
|
TSEC_SCP_CTL0
Bits
|
Description
|
10
|
Enable the LOAD interface
|
12
|
Enable the STORE interface
|
14
|
Enable the CMD interface
|
16
|
Enable the SEQ block
|
20
|
Enable the CTL block
|
TSEC_SCP_CTL1
Bits
|
Description
|
0
|
Clear all SEQ block's instructions
|
8
|
Unknown
|
11
|
Enable RNG block's test mode
|
12
|
Enable the RNG block
|
16
|
Enable LOAD interface's dummy mode (all reads return 0)
|
20
|
Enable LOAD interface bypassing (all reads are dropped)
|
24
|
Enable STORE interface bypassing (all writes are dropped)
|
TSEC_SCP_CTL_STAT
Bits
|
Description
|
20
|
TSEC_SCP_CTL_STAT_DEBUG_MODE
|
TSEC_SCP_CTL_LOCK
Bits
|
Description
|
0
|
Enable lockdown mode (locks IMEM and DMEM)
|
1
|
Unknown
|
2
|
Unknown
|
3
|
Unknown
|
4
|
Lock the SCP
|
5
|
Unknown
|
6
|
Unknown
|
7
|
Unknown
|
Controls lockdown mode and can only be cleared in Heavy Secure mode.
TSEC_SCP_CFG
Bits
|
Description
|
0
|
Unknown
|
1
|
Unknown
|
2
|
Unknown
|
3
|
Unknown
|
4
|
Unknown
|
8
|
Flush the CMD interface
|
12-13
|
Carry chain size
0: 32 bits
1: 64 bits
2: 96 bits
3: 128 bits
|
16-31
|
Timeout value
|
TSEC_SCP_CTL_SCP
Bits
|
Description
|
0
|
Swap SCP master
|
1
|
Current SCP master
0: Falcon
1: External
|
TSEC_SCP_CTL_PKEY
Bits
|
Description
|
0
|
TSEC_SCP_CTL_PKEY_REQUEST_RELOAD
|
1
|
TSEC_SCP_CTL_PKEY_LOADED
|
TSEC_SCP_CTL_DBG
Bits
|
Description
|
0
|
Unknown
|
4
|
Unknown
|
8
|
Unknown
|
12
|
Unknown
|
TSEC_SCP_DBG0
Bits
|
Description
|
0-3
|
Index
|
4
|
Auto-increment
|
5-6
|
Target
0: None
1: STORE
2: LOAD
3: SEQ
|
8-12
|
SEQ block's current sequence size
|
13-16
|
SEQ block's current instruction address
|
17
|
SEQ block's current instruction is valid
|
18
|
SEQ block is running in HS mode
|
19-22
|
LOAD interface's pipeline size
|
23
|
LOAD interface's current instruction is valid
|
24
|
LOAD interface is running in HS mode
|
25-26
|
STORE interface's pipeline size
|
30
|
STORE interface's current instruction is valid
|
31
|
STORE interface is running in HS mode
|
Used for debugging the LOAD, STORE and SEQ blocks.
TSEC_SCP_DBG1
Bits
|
Description
|
0-3
|
SEQ block's current instruction's first operand
|
4-9
|
SEQ block's current instruction's second operand
|
10-14
|
SEQ block's current instruction's opcode
|
Used for retrieving debug data. Contains information on the last crypto sequence created when debugging the SEQ controller.
TSEC_SCP_DBG2
Bits
|
Description
|
0-1
|
SEQ block's state
0: Idle
1: Recording is active (cs0begin/cs1begin)
|
4-7
|
Number of SEQ block's instructions left
|
12-15
|
Active crypto key register
|
Used for retrieving additional debug data associated with the SEQ block.
TSEC_SCP_CMD
Bits
|
Description
|
0-3
|
Destination register
|
8-13
|
Source register or immediate value
|
20-24
|
Command opcode
0x0: nop (fuc5 opcode 0x00)
0x1: cmov (fuc5 opcode 0x84)
0x2: cxsin (fuc5 opcode 0x88) or xdst (with cxset)
0x3: cxsout (fuc5 opcode 0x8C) or xdld (with cxset)
0x4: crnd (fuc5 opcode 0x90)
0x5: cs0begin (fuc5 opcode 0x94)
0x6: cs0exec (fuc5 opcode 0x98)
0x7: cs1begin (fuc5 opcode 0x9C)
0x8: cs1exec (fuc5 opcode 0xA0)
0x9: invalid (fuc5 opcode 0xA4)
0xA: cchmod (fuc5 opcode 0xA8)
0xB: cxor (fuc5 opcode 0xAC)
0xC: cadd (fuc5 opcode 0xB0)
0xD: cand (fuc5 opcode 0xB4)
0xE: crev (fuc5 opcode 0xB8)
0xF: cprecmac (fuc5 opcode 0xBC)
0x10: csecret (fuc5 opcode 0xC0)
0x11: ckeyreg (fuc5 opcode 0xC4)
0x12: ckexp (fuc5 opcode 0xC8)
0x13: ckrexp (fuc5 opcode 0xCC)
0x14: cenc (fuc5 opcode 0xD0)
0x15: cdec (fuc5 opcode 0xD4)
0x16: csigcmp (fuc5 opcode 0xD8)
0x17: csigenc (fuc5 opcode 0xDC)
0x18: csigclr (fuc5 opcode 0xE0)
|
28
|
CMD interface's current instruction is valid
|
31
|
CMD interface is running in HS mode
|
Contains information on the last crypto command executed.
TSEC_SCP_STAT0
Bits
|
Description
|
0
|
SCP is active
|
2
|
CMD interface is active
|
4
|
STORE interface is active
|
6
|
SEQ block is active
|
8
|
CTL block is active
|
10
|
LOAD interface is active
|
14
|
AES block is active
|
16
|
RNG block is active
|
Contains the status of the hardware blocks and interfaces.
TSEC_SCP_STAT1
Bits
|
Description
|
0-1
|
Signature comparison result
0: None
1: Running
2: Failed
3: Succeeded
|
4
|
LOAD interface is running in HS mode
|
6
|
LOAD interface is ready
|
8
|
STORE interface is running in HS mode
|
10
|
STORE interface received a valid instruction
|
12
|
CMD interface is running in HS mode
|
14
|
CMD interface received a valid instruction
|
Contains the status of the last authentication attempt and other miscellaneous statuses.
TSEC_SCP_STAT2
Bits
|
Description
|
0-4
|
Current SEQ opcode
|
5-9
|
Current CMD opcode
|
10-14
|
Pending CMD opcode
|
15-16
|
AES operation
0: Encryption
1: Decryption
2: Key expansion
3: Key reverse expansion
|
24
|
Unknown
|
25
|
STORE operation is stalled
|
26
|
LOAD operation is stalled
|
27
|
RNG operation is stalled
|
28
|
Unknown
|
29
|
AES operation is stalled
|
Contains the status of crypto operations.
TSEC_SCP_RNG_STAT0
Bits
|
Description
|
0
|
Internal RND controller is ready
|
4-7
|
Unknown
|
8-11
|
Unknown
|
16
|
Unknown
|
20
|
Unknown
|
TSEC_SCP_RNG_STAT1
Bits
|
Description
|
0-15
|
Unknown
|
16-31
|
Unknown
|
TSEC_SCP_IRQSTAT
Bits
|
Description
|
0
|
RND ready
|
8
|
ACL error
|
12
|
SEC error
|
16
|
CMD error
|
20
|
Single step
|
24
|
RND operation
|
28
|
Timeout
|
Used for getting the status of crypto IRQs.
TSEC_SCP_IRQMASK
Bits
|
Description
|
0
|
RND ready
|
8
|
ACL error
|
12
|
SEC error
|
16
|
CMD error
|
20
|
Single step
|
24
|
RND operation
|
28
|
Timeout
|
Used for getting the value of the mask for crypto IRQs.
TSEC_SCP_ACL_ERR
Bits
|
Description
|
0
|
Writing to a crypto register without the correct ACL
|
4
|
Reading from a crypto register without the correct ACL
|
8
|
Invalid ACL change (cchmod)
|
31
|
ACL error occurred
|
Contains information on errors generated by the ACL error IRQ.
TSEC_SCP_SEC_ERR
Bits
|
Description
|
0
|
Unknown
|
1-2
|
Unknown
|
4
|
Unknown
|
5-6
|
Unknown
|
16
|
Unknown
|
17-18
|
Unknown
|
20
|
Unknown
|
21-22
|
Unknown
|
24
|
Unknown
|
25-26
|
Unknown
|
31
|
SEC error occurred
|
TSEC_SCP_CMD_ERR
Bits
|
Description
|
0
|
Invalid command
|
4
|
Empty crypto sequence
|
8
|
Crypto sequence is too long
|
12
|
Crypto sequence was not finished
|
16
|
Forbidden signature operation (csigcmp, csigenc or csigclr in NS mode)
|
20
|
Invalid signature operation (csigcmp in HS mode)
|
24
|
Forbidden ACL change (cchmod in NS mode)
|
Contains information on errors generated by the CMD error IRQ.
TSEC_SCP_RND_CTL0
Bits
|
Description
|
0-31
|
RND clock trigger lower limit
|
TSEC_SCP_RND_CTL1
Bits
|
Description
|
0-15
|
RND clock trigger upper limit
|
16-31
|
RND clock trigger mask
|
TSEC_TFBIF_CTL
Bits
|
Description
|
0
|
TSEC_TFBIF_CTL_CLR_BWCOUNT
|
1
|
TSEC_TFBIF_CTL_ENABLE
|
2
|
TSEC_TFBIF_CTL_CLR_IDLEWDERR
|
3
|
TSEC_TFBIF_CTL_RESET
|
4
|
TSEC_TFBIF_CTL_IDLE
|
5
|
TSEC_TFBIF_CTL_IDLEWDERR
|
6
|
TSEC_TFBIF_CTL_SRTOUT
|
7
|
TSEC_TFBIF_CTL_CLR_SRTOUT
|
8-11
|
TSEC_TFBIF_CTL_SRTOVAL
|
12
|
TSEC_TFBIF_CTL_VPR
|
TSEC_TFBIF_MCCIF_FIFOCTRL
Bits
|
Description
|
0
|
TSEC_TFBIF_MCCIF_FIFOCTRL_RCLK_OVERRIDE
|
1
|
TSEC_TFBIF_MCCIF_FIFOCTRL_WCLK_OVERRIDE
|
2
|
TSEC_TFBIF_MCCIF_FIFOCTRL_WRCL_MCLE2X
|
3
|
TSEC_TFBIF_MCCIF_FIFOCTRL_RDMC_RDFAST
|
4
|
TSEC_TFBIF_MCCIF_FIFOCTRL_WRMC_CLLE2X
|
5
|
TSEC_TFBIF_MCCIF_FIFOCTRL_RDCL_RDFAST
|
6
|
TSEC_TFBIF_MCCIF_FIFOCTRL_CCLK_OVERRIDE
|
7
|
TSEC_TFBIF_MCCIF_FIFOCTRL_RCLK_OVR_MODE
|
8
|
TSEC_TFBIF_MCCIF_FIFOCTRL_WCLK_OVR_MODE
|
TSEC_TFBIF_THROTTLE
Bits
|
Description
|
0-11
|
TSEC_TFBIF_THROTTLE_BUCKET_SIZE
|
16-27
|
TSEC_TFBIF_THROTTLE_LEAK_COUNT
|
30-31
|
TSEC_TFBIF_THROTTLE_LEAK_SIZE
|
TSEC_TFBIF_DBG_STAT0
Bits
|
Description
|
0
|
TSEC_TFBIF_DBG_STAT0_1K_TRANSFER
|
1
|
TSEC_TFBIF_DBG_STAT0_RREQ_ISSUED
|
2
|
TSEC_TFBIF_DBG_STAT0_WREQ_ISSUED
|
3
|
TSEC_TFBIF_DBG_STAT0_TAGQ_ISSUED
|
4
|
TSEC_TFBIF_DBG_STAT0_STALL_RDATQ
|
5
|
TSEC_TFBIF_DBG_STAT0_STALL_RACKQ
|
6
|
TSEC_TFBIF_DBG_STAT0_STALL_WREQQ
|
7
|
TSEC_TFBIF_DBG_STAT0_STALL_WDATQ
|
8
|
TSEC_TFBIF_DBG_STAT0_STALL_WACKQ
|
9
|
TSEC_TFBIF_DBG_STAT0_STALL_RREQ_PENDING
|
10
|
TSEC_TFBIF_DBG_STAT0_STALL_WREQ_PENDING
|
11
|
TSEC_TFBIF_DBG_STAT0_STALL_MREQ
|
12
|
TSEC_TFBIF_DBG_STAT0_ENGINE_IDLE
|
13
|
TSEC_TFBIF_DBG_STAT0_RMCCIF_IDLE
|
14
|
TSEC_TFBIF_DBG_STAT0_WMCCIF_IDLE
|
15
|
TSEC_TFBIF_DBG_STAT0_CSB_IDLE
|
16
|
TSEC_TFBIF_DBG_STAT0_RU_IDLE
|
17
|
TSEC_TFBIF_DBG_STAT0_WU_IDLE
|
19
|
TSEC_TFBIF_DBG_STAT0_UNWEIGHT_ACTMON_ACTIVE
|
20
|
TSEC_TFBIF_DBG_STAT0_UNWEIGHT_ACTMON_MCB
|
TSEC_TFBIF_DBG_STAT1
Bits
|
Description
|
0-31
|
TSEC_TFBIF_DBG_STAT1_DATA
|
TSEC_TFBIF_DBG_RDCOUNT_LO
Bits
|
Description
|
0-31
|
TSEC_TFBIF_DBG_RDCOUNT_LO_DATA
|
TSEC_TFBIF_DBG_RDCOUNT_HI
Bits
|
Description
|
0-31
|
TSEC_TFBIF_DBG_RDCOUNT_HI_DATA
|
TSEC_TFBIF_DBG_WRCOUNT_LO
Bits
|
Description
|
0-31
|
TSEC_TFBIF_DBG_WRCOUNT_LO_DATA
|
TSEC_TFBIF_DBG_WRCOUNT_HI
Bits
|
Description
|
0-31
|
TSEC_TFBIF_DBG_WRCOUNT_HI_DATA
|
TSEC_TFBIF_DBG_R32COUNT
Bits
|
Description
|
0-31
|
TSEC_TFBIF_DBG_R32COUNT_DATA
|
TSEC_TFBIF_DBG_R64COUNT
Bits
|
Description
|
0-31
|
TSEC_TFBIF_DBG_R64COUNT_DATA
|
TSEC_TFBIF_DBG_R128COUNT
Bits
|
Description
|
0-31
|
TSEC_TFBIF_DBG_R128COUNT_DATA
|
TSEC_TFBIF_MCCIF_FIFOCTRL1
Bits
|
Description
|
0-15
|
TSEC_TFBIF_MCCIF_FIFOCTRL1_SRD2MC_REORDER_DEPTH_LIMIT
|
16-31
|
TSEC_TFBIF_MCCIF_FIFOCTRL1_SWR2MC_REORDER_DEPTH_LIMIT
|
TSEC_TFBIF_WRR_RDP
Bits
|
Description
|
0-15
|
TSEC_TFBIF_WRR_RDP_EXT_WEIGHT
|
16-31
|
TSEC_TFBIF_WRR_RDP_INT_WEIGHT
|
TSEC_TFBIF_SPROT_EMEM
Bits
|
Description
|
0-3
|
Read access level
|
4-7
|
Write access level
|
Controls accesses to external memory regions. Accessible in HS mode only.
TSEC_TFBIF_TRANSCFG
Bits
|
Description
|
0
|
TSEC_TFBIF_TRANSCFG_ATT0_SWID
|
4
|
TSEC_TFBIF_TRANSCFG_ATT1_SWID
|
8
|
TSEC_TFBIF_TRANSCFG_ATT2_SWID
|
12
|
TSEC_TFBIF_TRANSCFG_ATT3_SWID
|
16
|
TSEC_TFBIF_TRANSCFG_ATT4_SWID
|
20
|
TSEC_TFBIF_TRANSCFG_ATT5_SWID
|
24
|
TSEC_TFBIF_TRANSCFG_ATT6_SWID
|
28
|
TSEC_TFBIF_TRANSCFG_ATT7_SWID
|
Configures the software ID per CTXDMA port for memory transactions. Software ID 0 (HW_SWID) forces all transactions to go through the SMMU while software ID 1 (PHY_SWID) bypasses it. Accessible in HS mode only.
[6.0.0+] The nvhost_tsec firmware sets this register to 0x10 or 0x111110 before reading memory from the GPU UCODE carveout.
TSEC_TFBIF_REGIONCFG
Bits
|
Description
|
0-2
|
TSEC_TFBIF_REGIONCFG_T0_APERT_ID
|
3
|
TSEC_TFBIF_REGIONCFG_T0_VPR
|
4-6
|
TSEC_TFBIF_REGIONCFG_T1_APERT_ID
|
7
|
TSEC_TFBIF_REGIONCFG_T1_VPR
|
8-10
|
TSEC_TFBIF_REGIONCFG_T2_APERT_ID
|
11
|
TSEC_TFBIF_REGIONCFG_T2_VPR
|
12-14
|
TSEC_TFBIF_REGIONCFG_T3_APERT_ID
|
15
|
TSEC_TFBIF_REGIONCFG_T3_VPR
|
16-18
|
TSEC_TFBIF_REGIONCFG_T4_APERT_ID
|
19
|
TSEC_TFBIF_REGIONCFG_T4_VPR
|
20-22
|
TSEC_TFBIF_REGIONCFG_T5_APERT_ID
|
23
|
TSEC_TFBIF_REGIONCFG_T5_VPR
|
24-26
|
TSEC_TFBIF_REGIONCFG_T6_APERT_ID
|
27
|
TSEC_TFBIF_REGIONCFG_T6_VPR
|
28-30
|
TSEC_TFBIF_REGIONCFG_T7_APERT_ID
|
31
|
TSEC_TFBIF_REGIONCFG_T7_VPR
|
Configures the aperture ID and VPR mode per CTXDMA port for memory region accessing. Accessible in HS mode only.
[6.0.0+] The nvhost_tsec firmware sets this register to 0x20 or 0x140 before reading memory from the GPU UCODE carveout.
TSEC_TFBIF_ACTMON_ACTIVE_MASK
Bits
|
Description
|
0
|
TSEC_TFBIF_ACTMON_ACTIVE_MASK_STARVED_MC
|
1
|
TSEC_TFBIF_ACTMON_ACTIVE_MASK_STALLED_MC
|
2
|
TSEC_TFBIF_ACTMON_ACTIVE_MASK_DELAYED_MC
|
3
|
TSEC_TFBIF_ACTMON_ACTIVE_MASK_ACTIVE
|
Takes the memory access mask for the Activity Monitor. Disconnected on the TSEC.
TSEC_TFBIF_ACTMON_ACTIVE_BORPS
Bits
|
Description
|
0
|
TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STARVED_MC_POLARITY
|
1
|
TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STARVED_MC_OPERATION
|
2
|
TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STALLED_MC_POLARITY
|
3
|
TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STALLED_MC_OPERATION
|
4
|
TSEC_TFBIF_ACTMON_ACTIVE_BORPS_DELAYED_MC_POLARITY
|
5
|
TSEC_TFBIF_ACTMON_ACTIVE_BORPS_DELAYED_MC_OPERATION
|
6
|
TSEC_TFBIF_ACTMON_ACTIVE_BORPS_ACTIVE_POLARITY
|
7
|
TSEC_TFBIF_ACTMON_ACTIVE_BORPS_ACTIVE_OPERATION
|
Takes the billions of records per second count for the Activity Monitor. Disconnected on the TSEC.
TSEC_TFBIF_ACTMON_ACTIVE_WEIGHT
Bits
|
Description
|
0-31
|
TSEC_TFBIF_ACTMON_ACTIVE_WEIGHT_VAL
|
Controls the Activity Monitor. Disconnected on the TSEC.
TSEC_TFBIF_ACTMON_MCB_MASK
Bits
|
Description
|
0
|
TSEC_TFBIF_ACTMON_MCB_MASK_STARVED_MC
|
1
|
TSEC_TFBIF_ACTMON_MCB_MASK_STALLED_MC
|
2
|
TSEC_TFBIF_ACTMON_MCB_MASK_DELAYED_MC
|
3
|
TSEC_TFBIF_ACTMON_MCB_MASK_ACTIVE
|
Disconnected on the TSEC.
TSEC_TFBIF_ACTMON_MCB_BORPS
Bits
|
Description
|
0
|
TSEC_TFBIF_ACTMON_MCB_BORPS_STARVED_MC_POLARITY
|
1
|
TSEC_TFBIF_ACTMON_MCB_BORPS_STARVED_MC_OPERATION
|
2
|
TSEC_TFBIF_ACTMON_MCB_BORPS_STALLED_MC_POLARITY
|
3
|
TSEC_TFBIF_ACTMON_MCB_BORPS_STALLED_MC_OPERATION
|
4
|
TSEC_TFBIF_ACTMON_MCB_BORPS_DELAYED_MC_POLARITY
|
5
|
TSEC_TFBIF_ACTMON_MCB_BORPS_DELAYED_MC_OPERATION
|
6
|
TSEC_TFBIF_ACTMON_MCB_BORPS_ACTIVE_POLARITY
|
7
|
TSEC_TFBIF_ACTMON_MCB_BORPS_ACTIVE_OPERATION
|
Disconnected on the TSEC.
TSEC_TFBIF_ACTMON_MCB_WEIGHT
Bits
|
Description
|
0-31
|
TSEC_TFBIF_ACTMON_MCB_WEIGHT_VAL
|
Disconnected on the TSEC.
TSEC_TFBIF_THI_TRANSPROP
Bits
|
Description
|
0-6
|
TSEC_TFBIF_THI_TRANSPROP_STREAMID0
|
8-14
|
TSEC_TFBIF_THI_TRANSPROP_STREAMID1
|
16
|
TSEC_TFBIF_THI_TRANSPROP_TZ_AUTH
|
TSEC_CG
Bits
|
Description
|
0-5
|
TSEC_CG_IDLE_CG_DLY_CNT
|
6
|
TSEC_CG_IDLE_CG_EN
|
16-18
|
TSEC_CG_WAKEUP_DLY_CNT
|
19
|
TSEC_CG_WAKEUP_DLY_EN
|
TSEC_BAR0_CTL
Bits
|
Description
|
0
|
TSEC_BAR0_CTL_READ
|
1
|
TSEC_BAR0_CTL_WRITE
|
4-7
|
TSEC_BAR0_CTL_BYTE_MASK
|
12-13
|
TSEC_BAR0_CTL_STATUS
0: Idle
1: Busy
2: Error
3: Disabled
|
31
|
TSEC_BAR0_CTL_INIT
|
A BAR0 DMA read/write operation requires bits TSEC_BAR0_CTL_INIT and TSEC_BAR0_CTL_READ/TSEC_BAR0_CTL_WRITE to be set in TSEC_BAR0_CTL.
During the transfer, TSEC_BAR0_CTL_STATUS is set to "Busy".
Accessing an invalid address sets TSEC_BAR0_CTL_STATUS to "Error".
TSEC_BAR0_ADDR
Bits
|
Description
|
0-31
|
TSEC_BAR0_ADDR_VAL
|
Takes the address for DMA transfers between TSEC and HOST1X (master and clients).
TSEC_BAR0_DATA
Bits
|
Description
|
0-31
|
TSEC_BAR0_DATA_VAL
|
Takes the data for DMA transfers between TSEC and HOST1X (master and clients).
TSEC_BAR0_TIMEOUT
Bits
|
Description
|
0-31
|
TSEC_BAR0_TIMEOUT_VAL
|
Takes the timeout value for DMA transfers between TSEC and HOST1X (master and clients).
TSEC_TEGRA_CTL
Bits
|
Description
|
16
|
TSEC_TEGRA_CTL_TKFI_KFUSE
|
17
|
TSEC_TEGRA_CTL_TKFI_RESTART_FSM_KFUSE
|
24
|
TSEC_TEGRA_CTL_TMPI_FORCE_IDLE_INPUTS_I2C
|
25
|
TSEC_TEGRA_CTL_TMPI_RESTART_FSM_HOST1X
|
26
|
TSEC_TEGRA_CTL_TMPI_RESTART_FSM_APB
|
27
|
TSEC_TEGRA_CTL_TMPI_DISABLE_OUTPUT_I2C
|
Falcon
"Falcon" (FAst Logic CONtroller) is a proprietary general purpose CPU which can be found inside various hardware blocks that require some sort of logic processing such as TSEC (TSECA and TSECB), NVDEC, NVENC, NVJPG, VIC, GPU PMU and XUSB.
Processor Registers
A total of 32 processor registers are available in the Falcon CPU.
REG0-REG15
These are 16 32-bit GPRs (general purpose registers).
IV0
This is a SPR (special purpose register) that holds the address for interrupt vector 0. Only bits 0 to 15 are used.
IV1
This is a SPR (special purpose register) that holds the address for interrupt vector 1. Only bits 0 to 15 are used.
IV2
This is a SPR (special purpose register) that holds the address for interrupt vector 2. This register is considered "UNDEFINED" and appears to be unused.
EV
This is a SPR (special purpose register) that holds the address for the exception vector. Only bits 0 to 15 are used.
Alternative name (envytools): "tv".
SP
This is a SPR (special purpose register) that holds the current stack pointer.
PC
This is a SPR (special purpose register) that holds the current program counter.
IMB
This is a SPR (special purpose register) that holds the external base address for IMEM transfers.
Alternative name (envytools): "xcbase".
DMB
This is a SPR (special purpose register) that holds the external base address for DMEM transfers.
Alternative name (envytools): "xdbase".
CSW
This is a SPR (special purpose register) that holds various flag bits.
Bits
|
Description
|
0-7 |
General purpose predicates
|
8 |
ALU carry flag
|
9 |
ALU signed overflow flag
|
10 |
ALU sign flag
|
11 |
ALU zero flag
|
16 |
Interrupt 0 enable
|
17 |
Interrupt 1 enable
|
18 |
Interrupt 2 enable (undefined)
|
20 |
Interrupt 0 saved enable
|
21 |
Interrupt 1 saved enable
|
22 |
Interrupt 2 saved enable (undefined)
|
24 |
Exception active
|
26-31 |
Unknown
|
Alternative name (envytools): "flags".
CCR
This is a SPR (special purpose register) that holds configuration bits for the SCP DMA override functionality. The value of this register is set using the "cxset" instruction which provides a way to change the behavior of a variable amount of successively executed DMA-related instructions ("xdwait", "xdst" and "xdld").
Bits |
Description
|
0-4 |
Number of instructions the override is valid for (0x1F means infinite)
|
5 |
Crypto destination/source select
0: Crypto register
1: Crypto stream
|
6 |
External memory override
0: Disabled
1: Enabled
|
7 |
Internal memory select
0: DMEM
1: IMEM
|
Alternative name (envytools): "cx".
SEC
This is a SPR (special purpose register) that holds configuration bits for the SCP authentication process.
Bits
|
Description
|
0-7 |
Start of region to authenticate (in pages of 0x100 bytes)
|
16 |
Mark all subsequent code transfers as secret
|
17 |
Decrypt region to authenticate
|
18 |
Signature check passed
|
19 |
Suppress interrupts and exceptions
|
24-31 |
Size of region to authenticate (in pages of 0x100 bytes)
|
Alternative name (envytools): "cauth".
CTX
This is a SPR (special purpose register) that holds configuration bits for the CTXDMA ports.
Bits
|
Description
|
0-2 |
CTXDMA port for code loads (xcld)
|
4-6 |
CTXDMA port for code stores (invalid)
|
8-10 |
CTXDMA port for data loads (xdld)
|
12-14 |
CTXDMA port for data stores (xdst)
|
Alternative name (envytools): "xtargets".
EXCI
This is a SPR (special purpose register) that holds information on raised exceptions.
Bits
|
Description
|
0-15 |
Exception PC
|
20-23 |
Exception cause
|
Alternative name (envytools): "tstatus".
SEC1
Unknown. Marked as "RESERVED".
IMB1
Unknown. Marked as "RESERVED".
DMB1
Unknown. Marked as "RESERVED".
Heavy Secure Mode
Entry
From non-secure mode, upon jumping to a page marked as secret, a secret fault occurs. This causes the CPU to verify the region specified in $cauth against the MAC loaded in $c6. If the comparison is successful, the valid bit (bit0) is set on all pages in the $cauth region, and $pc is set to the base of the $cauth region. If the comparsion fails, the CPU is halted.
Exit
The CPU automatically goes back to non-secure mode when returning back into non-secret pages. When this happens, the valid bit (bit0) in the TLB flags is cleared for all secret pages.
Implementation
Under certain circumstances, it is possible to observe sigcmp being briefly written to TSEC_SCP_CMD as "csigcmp $c4 $c6" while the opcodes in TSEC_SCP_STAT2 are set to "cxsin" and "csigcmp", respectively.
Via TSEC_SCP_DBG0 it can be observed that a 3-sized macro sequence is loaded into cs0 during a secure mode transition.
SCP
"SCP" (Secure Co-Processor) is a proprietary coprocessor which can be found inside every Falcon that supports Heavy Secure Mode. On the Tegra X1 these are TSECA, TSECB, NVDEC and the GPU's PMU.
Hardware
SCP is subdivided into several specialized hardware blocks and interfaces.
LOAD
Interface for handling memory reads from SCP to Falcon.
Can be enabled or disabled by register TSEC_SCP_CTL0.
STORE
Interface for handling memory writes from Falcon to SCP.
Can be enabled or disabled by register TSEC_SCP_CTL0.
CMD
Interface for translating Falcon crypto operands into SCP commands.
Can be enabled or disabled by register TSEC_SCP_CTL0 and reports the status of the current command through register TSEC_SCP_CMD.
SEQ
Configurable block for recording and executing sequences of crypto operations in the form of macros.
Can be enabled or disabled by register TSEC_SCP_CTL0.
CTL
Overseer block for controlling certain SCP features.
Can be enabled or disabled by register TSEC_SCP_CTL0.
Registers TSEC_SCP_CTL_STAT, TSEC_SCP_CTL_LOCK, TSEC_SCP_CTL_SCP, TSEC_SCP_CTL_PKEY and TSEC_SCP_CTL_DBG refer to this block.
AES
Block for providing AES-128-ECB functionality.
RNG
Block for encapsulating and controlling the internal random number generator.
Can be enabled or disabled by register TSEC_SCP_CTL1 and reports the status of the internal random number generator through registers TSEC_SCP_RNG_STAT0 and TSEC_SCP_RNG_STAT1.
RND
Internal random number generator.
Can be configured by the TSEC_SCP_RND_CTLx registers.
Operations
Opcode
|
Name
|
Operand0
|
Operand1
|
Operation
|
Condition
|
0 |
nop |
N/A |
N/A |
|
|
1 |
mov |
$cX |
$cY |
$cX = $cY; ACL(X) = ACL(Y); |
|
2 |
sin |
$cX |
N/A |
$cX = read_stream(); ACL(X) = ???; |
|
3 |
sout |
$cX |
N/A |
write_stream($cX); |
?
|
4 |
rnd |
$cX |
N/A |
$cX = read_rnd(); ACL(X) = ???; |
|
5 |
s0begin |
immX |
N/A |
record_macro_for_N_instructions(0, immX); |
|
6 |
s0exec |
immX |
N/A |
execute_macro_N_times(0, immX); |
|
7 |
s1begin |
immX |
N/A |
record_macro_for_N_instructions(1, immX); |
|
8 |
s1exec |
immX |
N/A |
execute_macro_N_times(1, immX); |
|
9 |
<invalid> |
|
|
|
|
0xA |
chmod |
$cX |
immY |
Complicated, see ACL. |
|
0xB |
xor |
$cX |
$cY |
$cX ^= $cY; |
(ACL(X) & 2) && (ACL(Y) & 2)
|
0xC |
add |
$cX |
immY |
$cX += immY; |
(ACL(X) & 2)
|
0xD |
and |
$cX |
$cY |
$cX &= $cY; |
(ACL(X) & 2) && (ACL(Y) & 2)
|
0xE |
rev |
$cX |
$cY |
$cX = endian_swap128($cY); ACL(X) = ACL(Y); |
|
0xF |
gfmul |
$cX |
$cY |
$cX = gfmul($cY); ACL(X) = ACL(Y); |
(ACL(Y) & 2)
|
0x10 |
secret |
$cX |
immY |
$cX = load_secret(immY); ACL(X) = load_secret_acl(immY); |
|
0x11 |
keyreg |
immX |
N/A |
active_key_idx = immX; |
|
0x12 |
kexp |
$cX |
$cY |
$cX = aes_kexp($cY); ACL(X) = ACL(Y); |
|
0x13 |
krexp |
$cX |
$cY |
$cX = aes_kexp_reverse($cY); ACL(X) = ACL(Y); |
|
0x14 |
enc |
$cX |
$cY |
$cX = aes_enc(active_key_idx, $cY); ACL(X) = ACL(active_key_idx) & ACL(Y); |
|
0x15 |
dec |
$cX |
$cY |
$cX = aes_dec(active_key_idx, $cY); ACL(X) = ACL(active_key_idx) & ACL(Y); |
|
0x16 |
sigcmp |
$cX |
$cY |
if (hash_verify($cX, $cY)) { has_sig = true; current_sig = $cX; } |
?
|
0x17 |
sigclr |
N/A |
N/A |
has_sig = false; |
|
0x18 |
sigenc |
$cX |
$cY |
if (has_sig) { $cX = aes_enc($cY, current_sig); ACL(X) = 0x13; } |
|
sigcmp
00000000: f5 3c XY d8 csigcmp $cY $cX
Takes 2 crypto registers as operands and is automatically executed when jumping to a code region previously uploaded as secret. This instruction does not work in secure mode.
sigclr
00000000: f5 3c 00 e0 csigclr
This instruction takes no operands and clears the saved cauth signature used by the csigenc instruction.
chmod
00000000: f5 3c XY a8 cchmod $cY 0X
or 00000000: f5 3c XY a9 cchmod $cY 1X
This instruction takes a crypto register and a 5 bit immediate value which represents the ACL mask to set.
rnd
00000000: f5 3c 0X 90 crnd $cX
This instruction initializes a crypto register with random data.
Executing this instruction only succeeds if the RNG controller is enabled for the SCP, which requires taking the following steps:
Otherwise it hangs forever.
ACLs
Each crypto register has an associated access control list with the following format:
Bit
|
Description
|
0 |
Secure key. Forced set if bit1 is set. Once cleared, cannot be set again.
|
1 |
Secure readable. Once cleared, cannot be set again.
|
2 |
Insecure key. Forced set if bit3 is set. Forced clear if bit0 is clear. Can be toggled back and forth.
|
3 |
Insecure readable. Forced clear if bit1 is clear. Can be toggled back and forth.
|
4 |
Insecure overwritable. Can be toggled back and forth.
|
On boot, the ACL is 0x1F for all $cX.
Loading into $cX using xdst instruction sets ACL($cX) to 0x13 and 0x1F, for secure and insecure mode respectively.
Spilling a $cX to DMEM using xdld instruction is allowed if (ACL($cX) & 2) or (ACL($cX) & 8), for secure and insecure mode respectively.
Loading a secret into $cX sets a per-secret ACL, unconditionally.
Secrets
Heavy Secure Mode has access to 64 128-bit keys which are burned at factory. These keys can be loaded using the $csecret instruction which takes the target crypto register and the key index as arguments.
Secrets are specific to each Falcon unit with the exception of secret 0x3F. This secret is effectively empty (all zeros), but is configured to be overwritten with the KFUSE private key once the KFUSE clock is enabled. The KFUSE private key is console-unique.
Index |
ACL |
Description
|
0x00 |
0x13 |
Used by Keygen, nvhost_tsec, nvhost_nvdec_bl020_prod, nvhost_nvdec020_prod, nvhost_nvdec020_ns and acr_ucode firmwares.
|
0x01 |
0x10 |
Used by Falcon's Secure Boot ROM for the signature generation algorithm.
|
0x02 |
0x10 |
|
0x03 |
0x11 |
Used by nvhost_tsec, nvhost_nvdec020_prod and nvhost_nvdec020_ns firmwares.
|
0x04 |
0x10 |
Used by nvhost_tsec, nvhost_nvdec020_prod and nvhost_nvdec020_ns firmwares.
|
0x05 |
0x13 |
Used by nvhost_tsec, nvhost_nvdec_bl020_prod, nvhost_nvdec020_prod, nvhost_nvdec020_ns and acr_ucode firmwares.
|
0x06 |
0x11 |
Used by Falcon's Secure Boot ROM as key to decrypt data during authentication (decided by bit 17 in the SEC register).
|
0x07 |
0x11 |
Used by [6.0.0+] nvhost_tsec firmware.
|
0x08 |
0x10 |
|
0x09 |
0x13 |
Used by nvhost_tsec firmware.
|
0x0A |
0x11 |
|
0x0B |
0x10 |
Used by nvhost_tsec, nvhost_nvdec020_prod and nvhost_nvdec020_ns firmwares.
|
0x0C |
0x13 |
|
0x0D |
0x11 |
|
0x0E |
0x10 |
|
0x0F |
0x13 |
Used by nvhost_tsec firmware.
|
0x10 |
0x11 |
Used by [1.0.0-5.1.0] nvhost_tsec firmware.
|
0x11 |
0x10 |
|
0x12 |
0x13 |
|
0x13 |
0x11 |
|
0x14 |
0x10 |
|
0x15 |
0x13 |
Used by nvhost_nvdec_bl020_prod, [5.0.0+] nvhost_nvdec020_prod, [5.0.0+] nvhost_nvdec020_ns and [6.0.0+] nvhost_tsec firmwares.
|
0x16 |
0x11 |
|
0x17 |
0x10 |
|
0x18 |
0x13 |
|
0x19 |
0x11 |
|
0x1A |
0x10 |
|
0x1B |
0x13 |
|
0x1C |
0x11 |
|
0x1D |
0x10 |
|
0x1E |
0x13 |
|
0x1F |
0x11 |
|
0x20 |
0x10 |
|
0x21 |
0x13 |
|
0x22 |
0x11 |
|
0x23 |
0x10 |
|
0x24 |
0x13 |
|
0x25 |
0x11 |
|
0x26 |
0x10 |
Used by KeygenLdr and SecureBoot
|
0x27 |
0x13 |
|
0x28 |
0x11 |
|
0x29 |
0x10 |
|
0x2A |
0x13 |
|
0x2B |
0x11 |
|
0x2C |
0x10 |
|
0x2D |
0x13 |
|
0x2E |
0x11 |
|
0x2F |
0x10 |
|
0x30 |
0x13 |
|
0x31 |
0x11 |
|
0x32 |
0x10 |
|
0x33 |
0x13 |
|
0x34 |
0x11 |
|
0x35 |
0x10 |
|
0x36 |
0x13 |
|
0x37 |
0x11 |
|
0x38 |
0x10 |
|
0x39 |
0x13 |
|
0x3A |
0x11 |
|
0x3B |
0x10 |
|
0x3C |
0x13 |
Used by nvhost_tsec firmware.
|
0x3D |
0x11 |
|
0x3E |
0x10 |
|
0x3F |
0x10 |
Used by Keygen, nvhost_tsec, nvhost_nvdec020_prod and nvhost_nvdec020_ns firmwares.
|