btm
This is "nn::btm::IBtm".
Support for "nn::btm::*" was added to sdknso with 6.x.
| Cmd | Name |
|---|---|
| 0 | GetState |
| 1 | GetHostDeviceProperty |
| 2 | AcquireDeviceConditionEvent |
| 3 | GetDeviceCondition |
| 4 | SetBurstMode |
| 5 | SetSlotMode |
| 6 | [1.0.0-8.1.0] SetBluetoothMode |
| 7 | SetWlanMode |
| 8 | AcquireDeviceInfoEvent |
| 9 | GetDeviceInfo |
| 10 | AddDeviceInfo |
| 11 | RemoveDeviceInfo |
| 12 | IncreaseDeviceInfoOrder |
| 13 | LlrNotify |
| 14 | EnableRadio |
| 15 | DisableRadio |
| 16 | HidDisconnect |
| 17 | HidSetRetransmissionMode |
| 18 | [2.0.0+] AcquireAwakeReqEvent |
| 19 | [4.0.0+] AcquireLlrStateEvent |
| 20 | [4.0.0+] IsLlrStarted |
| 21 | [4.0.0+] EnableSlotSaving |
| 22 | [5.0.0+] ProtectDeviceInfo |
| 23 | [5.0.0+] AcquireBleScanEvent |
| 24 | [5.0.0+] GetBleScanParameterGeneral |
| 25 | [5.0.0+] GetBleScanParameterSmartDevice |
| 26 | [5.0.0+] StartBleScanForGeneral |
| 27 | [5.0.0+] StopBleScanForGeneral |
| 28 | [5.0.0+] GetBleScanResultsForGeneral |
| 29 | [5.0.0+] StartBleScanForPairedDevice |
| 30 | [5.0.0+] StopBleScanForPairedDevice |
| 31 | [5.0.0+] StartBleScanForSmartDevice |
| 32 | [5.0.0+] StopBleScanForSmartDevice |
| 33 | [5.0.0+] GetBleScanResultsForSmartDevice |
| 34 | [5.0.0+] AcquireBleConnectionEvent |
| 35 | [5.0.0+] BleConnect |
| 36 | [5.0.0+] BleOverrideConnection |
| 37 | [5.0.0+] BleDisconnect |
| 38 | [5.0.0+] BleGetConnectionState |
| 39 | [5.0.0+] BleGetGattClientConditionList |
| 40 | [5.0.0+] AcquireBlePairingEvent |
| 41 | [5.0.0+] BlePairDevice |
| 42 | [5.0.0+] BleUnpairDeviceOnBoth |
| 43 | [5.1.0+] BleUnpairDevice |
| 44 | [5.1.0+] BleGetPairedAddresses |
| 45 | [5.1.0+] AcquireBleServiceDiscoveryEvent |
| 46 | [5.1.0+] GetGattServices |
| 47 | [5.1.0+] GetGattService |
| 48 | [5.1.0+] GetGattIncludedServices |
| 49 | [5.1.0+] GetBelongingService |
| 50 | [5.1.0+] GetGattCharacteristics |
| 51 | [5.1.0+] GetGattDescriptors |
| 52 | [5.1.0+] AcquireBleMtuConfigEvent |
| 53 | [5.1.0+] ConfigureBleMtu |
| 54 | [5.1.0+] GetBleMtu |
| 55 | [5.1.0+] RegisterBleGattDataPath |
| 56 | [5.1.0+] UnregisterBleGattDataPath |
| 57 | [5.1.0+] RegisterAppletResourceUserId |
| 58 | [5.1.0+] UnregisterAppletResourceUserId |
| 59 | [5.1.0+] SetAppletResourceUserId |
| 60 | [8.0.0+] |
| 61 | [8.0.0+] |
| 62 | [9.0.0+] |
| 63 | [9.0.0+] |
| 64 | [10.0.0+] |
[3.0.0+] RegisterSystemEventForConnectedDeviceCondition, RegisterSystemEventForRegisteredDeviceInfo, and cmd18 now returns an output u8.
With [5.1.0+] cmds 24-42 were moved/replaced/etc (input/output changed).
[9.0.0+] Cmd13 now takes 0xC-bytes of input and no output, instead of 0x6-bytes of input.
btm:dbg
This is "nn::btm::IBtmDebug".
| Cmd | Name |
|---|---|
| 0 | AcquireDiscoveryEvent |
| 1 | StartDiscovery |
| 2 | CancelDiscovery |
| 3 | GetDeviceProperty |
| 4 | CreateBond |
| 5 | CancelBond |
| 6 | SetTsiMode |
| 7 | GeneralTest |
| 8 | HidConnect |
| 9 | [5.0.0+] GeneralGet |
| 10 | [5.1.0+] GetGattClientDisconnectionReason |
| 11 | [5.1.0+] GetBleConnectionParameter |
| 12 | [5.1.0+] GetBleConnectionParameterRequest |
[3.0.0+] RegisterSystemEventForDiscovery now returns an output u8.
btm:sys
This is "nn::btm::IBtmSystem".
| Cmd | Name |
|---|---|
| 0 | GetCore |
IBtmSystemCore
This is "nn::btm::IBtmSystemCore".
| Cmd | Name |
|---|---|
| 0 | StartGamepadPairing |
| 1 | CancelGamepadPairing |
| 2 | ClearGamepadPairingDatabase |
| 3 | GetPairedGamepadCount |
| 4 | EnableRadio |
| 5 | DisableRadio |
| 6 | GetRadioOnOff |
| 7 | [3.0.0+] AcquireRadioEvent |
| 8 | [3.0.0+] AcquireGamepadPairingEvent |
| 9 | [3.0.0+] IsGamepadPairingStarted |
btm:u
This is "nn::btm::IBtmUser".
This was added with [5.0.0+].
| Cmd | Name |
|---|---|
| 0 | #GetCore |
GetCore
No input, returns an output #IBtmUserCore.
IBtmUserCore
This is "nn::btm::IBtmUserCore".
AcquireBleScanEvent
No input, returns an output Event handle.
GetBleScanFilterParameter
Takes an input u16, returns 8-bytes of output.
GetBleScanFilterParameter2
Takes an input u16, returns 0x14-bytes of output.