Motherboard
Nintendo Switch
| Product Code | Description |
|---|---|
| ODIN-CPU-X5 | Pre-release Nintendo Switch. |
| HAC-CPU-01 | Retail Nintendo Switch (earliest manifacture date seen: 01/12 2016). |
| HAC-CPU-10 | Retail Nintendo Switch. |
| HAC-CPU-20 | Retail Nintendo Switch (earliest manifacture date seen: 26/10 2017). |
Nintendo Switch Mariko
| Product Code | Description |
|---|---|
| MODIN-CPU-X5 | Pre-release Nintendo Switch Mariko. |
| HAD-CPU-01 | Retail Nintendo Switch Mariko. |
Nintendo Switch Lite
| Product Code | Description |
|---|---|
| VALI-CPU-X5 | Pre-release Nintendo Switch Lite. |
Specifications
Nintendo Switch
| Component | Description |
|---|---|
| SoC | NVIDIA ODNX02-A2 |
| Screen | InnoLux P062CCA-AZ1 |
| Storage | Samsung KLMBG2JENB-B041 32 GB eMMC or Toshiba THGBMHG8C2LBAIL 32 GB eMMC |
| Memory | Samsung K4F6E304HB-MGCH 2 GB LPDDR4 DRAM x2 (Total 4GB) |
| Wifi/BT | Broadcom BCM4356XKUBG |
| PMIC | Maxim Integrated MAX77620AEWJ+T |
| Audio | Realtek ALC5639 |
Nintendo Switch Mariko
| Component | Description |
|---|---|
| SoC | NVIDIA ODNX10-A1 |
| Screen | InnoLux P062CCA-AZ2 |
| Storage | SK Hynix H26M62002JPR 32 GB eMMC |
| Memory | Samsung K4U6E3S4AM-MGCJ 2 GB LPDDR4x DRAM x2 (Total 4GB) |
| Wifi/BT | |
| PMIC | Maxim Integrated MAX77812 |
| Audio | Realtek ALC5639 |
Nintendo Switch Lite
| Component | Description |
|---|---|
| SoC | |
| Screen | |
| Storage | |
| Memory | Samsung K4U6E3S4AM-MGCJ 2 GB LPDDR4x DRAM x2 (Total 4GB) |
| Wifi/BT | |
| PMIC | Maxim Integrated MAX77812 |
| Audio |
eMMC Pinout
Front
Back
Supply power via the VCC 3.3V and 1.8V pins, and solder the CLK, CMD, and DAT0 pins to an SD Card reader in order to extract the data off the eMMC chip.
eMMC Connector
| Pin # | Name | Type |
|---|---|---|
| 1 | 3.3v | PWR |
| 2 | GND | PWR |
| 3 | CMD | BI |
| 4 | GND | PWR |
| 5 | DAT_STRB(?) | OUT |
| 6 | GND | PWR |
| 7 | DAT4 | BI |
| 8 | GND | PWR |
| 9 | DAT5 | BI |
| 10 | GND | PWR |
| 11 | DAT6 | BI |
| 12 | GND | PWR |
| 13 | DAT7 | BI |
| 14 | GND | PWR |
| 15 | 1.8v | PWR |
| 16 | 1.8v | PWR |
| 17 | GND | PWR |
| 18 | GND | PWR |
| 19 | DAT2 | BI |
| 20 | GND | PWR |
| 21 | DAT1 | BI |
| 22 | GND | PWR |
| 23 | DAT0 | BI |
| 24 | GND | PWR |
| 25 | DAT3 | BI |
| 26 | GND | PWR |
| 27 | CLK | IN |
| 28 | GND | PWR |
| 29 | RESET | IN |
| 30 | 3.3v | PWR |
The eMMC connector plug on the board mates with the receptacle on the Switch motherboard. The receptacle is a Molex 5009130302, and is available from retailers such as Digi-Key.
Notes
1. https://www.sosav.fr/guides/consoles/nintendo/nintendo-salon/nintendo-switch/demontage-complet/
2. https://www.ifixit.com/Teardown/Nintendo+Switch+Teardown/78263