APM is utilized for setting system performance profiles including clocks for CPU, GPU, and memory.
apm
This is "nn::apm::IManager".
Cmd | Name | Notes |
---|---|---|
0 | OpenSession | Returns an #ISession. |
1 | GetPerformanceMode |
apm:p
This is "nn::apm::IManagerPrivileged".
Cmd | Name | Notes |
---|---|---|
0 | OpenSession | Returns an #ISession. |
apm:sys
This is "nn::apm::ISystemManager".
Cmd | Name | Notes |
---|---|---|
0 | RequestPerformanceMode | |
1 | GetPerformanceEvent | Returns an #ISession. |
2 | GetThrottlingState | |
3 | GetLastThrottlingState | |
4 | ClearLastThrottlingState | |
5 | [5.0.0+] LoadAndApplySettings |
ISession
This is "nn::apm::ISession".
Cmd | Name | Notes |
---|---|---|
0 | SetPerformanceConfiguration | Takes u32 PerformanceMode and u32 PerformanceConfiguration. |
1 | GetPerformanceConfiguration | Takes u32 PerformanceMode, returns output u32 PerformanceConfiguration. |
PerformanceMode
Value | Name |
---|---|
0 | Handheld |
1 | Docked |
PerformanceConfiguration
Value | CPU clock | GPU clock | Memory clock |
---|---|---|---|
0x00010000 | 1020 | 384 | 1600 |
0x00010001 | 1020 | 768 | 1600 |
0x00010002 | 1224 | 691.2 | 1600 |
0x00020000 | 1020 | 230.4 | 1600 |
0x00020001 | 1020 | 307.2 | 1600 |
0x00020002 | 1224 | 230.4 | 1600 |
0x00020003 | 1020 | 307 | 1331.2 |
0x00020004 | 1020 | 384 | 1331.2 |
0x00020005 | 1020 | 307.2 | 1065.6 |
0x00020006 | 1020 | 384 | 1065.6 |
0x92220007 | 1020 | 460.8 | 1600 |
0x92220008 | 1020 | 460.8 | 1331.2 |
Clocks are all in MHz.
Configurations 0x10001 and 0x20000 are only available while docked. Configurations 0x10002 and 0x20002 are only available for SDEV units.
Some of these require apm:p.
fgm, fgm:0, fgm:9
This is "nn::fgm::sf::ISession".
Cmd | Name |
---|---|
0 | Initialize |
IRequest
This is "nn::fgm::sf::IRequest".
Cmd | Name |
---|---|
0 | Initialize |
1 | Set |
2 | Get |
3 | Cancel |
fgm:dbg
This is "nn::fgm::sf::IDebugger".
Cmd | Name |
---|---|
0 | Initialize |
1 | Read |
2 | Cancel |
Settings
Key | Size | Notes |
---|---|---|
battery_draining_enabled | 1 | ? |
performance_mode_policy | strlen | "auto": use boost mode when docked. "normal": never use boost mode. "boost": always use boost mode (SDEV only). |
sdev_cpu_overclock_enabled | 1 | SDEV only. Used to allow access to 1224MHz CPU mode. |
sdev_throttling_additional_delay_us | 4 | SDEV only. |
sdev_throttling_additional_delay_enabled | 1 | SDEV only. |
throttling_for_smpd_enabled | 1 | Not used as of 3.0. |
throttling_for_undock_enabled | 1 | Not used as of 3.0. |