Bus services
gpio
This is "nn::gpio::IManager".
| Cmd | Name |
|---|---|
| 0 | #OpenSessionForDev |
| 1 | #OpenSession |
| 2 | #OpenSessionForTest |
| 3 | IsWakeEventActive |
| 4 | GetWakeEventActiveFlagSet |
| 5 | SetWakeEventActiveFlagSetForDebug |
| 6 |
OpenSessionForDev
Takes a raw GpioPadDescriptor and returns a #IPadSession session for it.
OpenSession
Same thing as OpenSessionForDev except the descriptor is looked up in the table below. Returns an #IPadSession session.
| GpioPadName | GpioPadDescriptor | Description | Direction | Used by |
|---|---|---|---|---|
| 1 | 0xCC | |||
| 2 | 0x24 | |||
| 4 | 0xDA | |||
| 5 | 0xDB | |||
| 6 | 0xDC | |||
| 7 | 0x25 | |||
| 8 | 0x90 | In | HID services | |
| 9 | 0x91 | |||
| 0xA | 0x96 | |||
| 0xB | 0x97 | |||
| 0xD | 6 | |||
| 0xE | 0x78 | |||
| 0xF | 0x93 | |||
| 0x10 | 0x7D | |||
| 0x11 | 0x7C | |||
| 0x12 | 0x7B | |||
| 0x13 | 0x7A | |||
| 0x14 | 0xBC | |||
| 0x15 | 0xAE | |||
| 0x17 | 0xB9 | In | HID services | |
| 0x18 | 0xBD | Out | HID services | |
| 0x19 | 0xBE | Volume key | In | Boot2 |
| 0x1A | 0xBF | Volume key | In | Boot2 |
| 0x1B | 0xC0 | |||
| 0x1C | 0xC1 | |||
| 0x1D | 0xA9 | |||
| 0x1E | 0xAA | |||
| 0x20 | 0xAD | |||
| 0x21 | 0xC8 | |||
| 0x22 | 0xCA | |||
| 0x23 | 0xCB | |||
| 0x24 | 0x4F | |||
| 0x25 | 0x50 | |||
| 0x26 | 0x51 | |||
| 0x27 | 0x52 | |||
| 0x28 | 0x54 | |||
| 0x29 | 0x56 | |||
| 0x2A | 0x57 | |||
| .. | .. | .. | .. | .. |
OpenSessionForTest
Same as #OpenSession but panics on failure.
IPadSession
This is "nn::gpio::IPadSession".
| Cmd | Name |
|---|---|
| 0 | SetDirection |
| 1 | GetDirection |
| 2 | SetInterruptMode |
| 3 | GetInterruptMode |
| 4 | SetInterruptEnable |
| 5 | GetInterruptEnable |
| 6 | GetInterruptStatus |
| 7 | ClearInterruptStatus |
| 8 | SetValue |
| 9 | GetValue |
| 10 | BindInterrupt |
| 11 | UnbindInterrupt |
| 12 | SetDebounceEnabled |
| 13 | GetDebounceEnabled |
| 14 | SetDebounceTime |
| 15 | GetDebounceTime |
GpioPadDescriptor
| Bits | Description |
|---|---|
| 7-5 | Controller index |
| 4-3 | Port index |
| 2-0 | Pin number |
i2c
This is "nn::i2c::IManager".
| Cmd | Name |
|---|---|
| 0 | OpenSessionForDev |
| 1 | OpenSession |
| 2 | HasDevice |
| 3 | HasDeviceForDev |
II2cSession
This is "nn::i2c::ISession".
| Cmd | Name |
|---|---|
| 0 | |
| 1 | |
| 2 | |
| 3 | Send |
| 4 | Receive |
| 5 | ExecuteCommandList |
i2c:pcv
| Cmd | Name |
|---|---|
| 0 | |
| 1 | |
| 2 | |
| 10 | |
| 11 | |
| 12 |
uart
This is "nn::uart::IManager".
| Cmd | Name | Notes |
|---|---|---|
| 0 | Returns a u8/bool. | |
| 1 | Returns a u8/bool. | |
| 2 | Returns a u8/bool. | |
| 3 | Returns a u8/bool. | |
| 4 | Takes marshalled arguments. | |
| 5 | Takes marshalled arguments. | |
| 6 | GetIPortSession | |
| 7 | ||
| 8 |
IPortSession
This is "nn::uart::IPortSession".
| Cmd | Name | Notes |
|---|---|---|
| 0 | Takes marshalled arguments | |
| 1 | Takes marshalled arguments | |
| 2 | ||
| 3 | Takes marshalled arguments | |
| 4 | Returns 2x u64. Both zero. | |
| 5 | ||
| 6 | ||
| 7 |
pwm
This is "nn::pwm::IManager".
| Cmd | Name |
|---|---|
| 0 | OpenSessionForDev |
| 1 | OpenSession |
IChannelSession
This is "nn::pwm::IChannelSession".
| Cmd | Name |
|---|---|
| 0 | SetPeriod |
| 1 | GetPeriod |
| 2 | SetDuty |
| 3 | GetDuty |
| 4 | SetEnabled |
| 5 | GetEnabled |