Secure Monitor Calls

The secure monitor provides two top level handlers of which each provides a range of sub handlers.

Secure Monitor Calls follow the ARM SMC calling convention up to a small change:

Bit number	Bit mask	Description
31	0x80000000	Set to 0 means Yielding Call; Set to 1 means Fast Call.
30	0x40000000	Set to 0 means SMC32 convention; Set to 1 means SMC64.
29-24	0x3F000000	Service Call ranges.
23-16	0x00FF0000	Must be zero.
15-8	0x0000FF00	Argument type. This is different from the ARM SMC calling convention.
7-0	0x000000FF	Function number within the range call type.

If bit n is set in the argument type then parameter Xn is treated as a pointer and the kernel will setup address translation for it in svcCallSecureMonitor.

Id 0

Functions exposed to user-mode processes using svcCallSecureMonitor.

Sub-Id	Name	In	Out
0xC3000401	SetConfig
0xC3000002	GetConfig (Same as Id 1 Sub-Id 4.)
0xC3000003	CheckStatus
0xC3000404	GetResult
0xC3000E05	ExpMod
0xC3000006	GetRandomBytes (Same as Id 1 Sub-Id 5.)
0xC3000007	#GenerateAesKek
0xC3000008	#LoadAesKey
0xC3000009	#CryptAes
0xC300000A	#GenerateSpecificAesKey
0xC300040B	#ComputeCmac
0xC300100C	#LoadRsaPrivateKey
0xC300100D	#PrivateRsa
0xC300100E	#LoadRsaPublicKey
0xC300060F	#PublicRsa
0xC3000610	#UnwrapRsaEncryptedAesKey
0xC3000011	#LoadRsaWrappedAesKey
0xC3000012	[2.0.0+] GenerateRsaKek

The overall concept here is the following:

All key material (AES and RSA) is stored in userspace, but it's encrypted with random AES kek's ("key encryption keys").
Each kek is generated as a function of an access key (picked at random).
The kek is generated differently depending on the #CryptoUsecase the key is used for.
- This means: Each key is "locked" to the #CryptoUsecase it was designated for.
- You can use a key for a different usecase, but you will only get garbage output.
After the kek has been generated, it is wrapped with a session-specific key and given back to userspace.
- This means: Plaintext kek keys never leave TrustZone.
- Further, this means: Actual AES/RSA keys never leave TrustZone.

GenerateAesKek

Takes an "access key" as input, an #CryptoUsecase.

Returns a session-unique kek for said usecase.

LoadAesKey

Takes a session kek created with #GenerateAesKek, and a wrapped AES key.

The session kek must have been created with CryptoUsecase_Aes.

CryptAes

Encrypts/decrypts using Aes (CTR and CBC).

Key must be set prior using one of the #LoadAesKey, #GenerateSpecificAesKey or #LoadRsaWrappedAesKey commands.

GenerateSpecificAesKey

Todo: This one seems unrelated to #CryptoUsecase.

LoadRsaPrivateKey

Takes a session kek created with #GenerateAesKek, and a wrapped RSA private key.

The session kek must have been created with CryptoUsecase_PrivateRsa.

PrivateRsa

Encrypts using Rsa private key.

Key must be set prior using the #LoadRsaPrivateKey command.

LoadRsaPublicKey

Takes a session kek created with #GenerateAesKek, and a wrapped RSA public key.

The session kek must have been created with CryptoUsecase_PublicRsa.

PublicRsa

Encrypts using Rsa public key.

Key must be set prior using the #LoadRsaPublicKey command.

UnwrapRsaEncryptedAesKey

Takes a session kek created with #GenerateAesKek, and a wrapped RSA public key.

Returns a session-unique AES key especially for use in #LoadRsaWrappedAesKey.

The session kek must have been created with CryptoUsecase_RsaWrappedAesKey.

LoadRsaWrappedAesKey

Takes a session-unique AES key from #UnwrapRsaEncryptedAesKey.

enum CryptoUsecase

Value	Name
0	CryptoUsecase_Aes
1	CryptoUsecase_PrivateRsa
2	CryptoUsecase_PublicRsa
3	CryptoUsecase_RsaWrappedAesKey

Id 1

Functions exposed to the kernel internally.

Sub-Id	Name	In	Out
0xC4000001	CpuSuspend (oyasumi)
0x84000002	CpuOff
0xC4000003	CpuOn
0xC3000004	GetConfig (Same as Id 0 Sub-Id 2.)
0xC3000005	GetRandomBytes (Same as Id 0 Sub-Id 6.)
0xC3000006	Panic
0xC3000007	[2.0.0+] ProtectKernelRegion
0xC3000008	[2.0.0+] ReadWriteRegister