Network Interface services

nifm:a, nifm:s, nifm:u

These are "nn::nifm::detail::IStaticService".

Max sessions: nifm:a = 0x2, nifm:s = 0x10, nifm:u = 0x5.

nifm:u = User, nifm:s = System, and nifm:a = Admin.

Cmd	Name	Notes
4	#CreateGeneralServiceOld ([1.0.0-2.3.0] CreateGeneralService)
5	[3.0.0+] #CreateGeneralService

CreateGeneralServiceOld

No input, returns an #IGeneralService.

CreateGeneralService

Takes a PID and an input u64 reserved_pid, returns an #IGeneralService.

IGeneralService

This is "nn::nifm::detail::IGeneralService".

Cmd	Name	Notes
1	#GetClientId
2	#CreateScanRequest
4	#CreateRequest
5	#GetCurrentNetworkProfile
6	EnumerateNetworkInterfaces
7	EnumerateNetworkProfiles
8	#GetNetworkProfile
9	#SetNetworkProfile
10	RemoveNetworkProfile
11	GetScanDataOld ([1.0.0-3.0.2] GetScanData)
12	#GetCurrentIpAddress
13	GetCurrentAccessPointOld ([1.0.0-3.0.2] GetCurrentAccessPoint)
14	CreateTemporaryNetworkProfile	Returns an #INetworkProfile.
15	#GetCurrentIpConfigInfo
16	SetWirelessCommunicationEnabled
17	IsWirelessCommunicationEnabled
18	GetInternetConnectionStatus
19	SetEthernetCommunicationEnabled
20	IsEthernetCommunicationEnabled
21	#IsAnyInternetRequestAccepted
22	IsAnyForegroundRequestAccepted
23	PutToSleep
24	WakeUp
25	GetSsidListVersion
26	SetExclusiveClient
27	GetDefaultIpSetting
28	SetDefaultIpSetting
29	SetWirelessCommunicationEnabledForTest
30	SetEthernetCommunicationEnabledForTest
31	[2.0.0+] GetTelemetorySystemEventReadableHandle
32	[2.0.0+] GetTelemetryInfo
33	[2.0.0+] ConfirmSystemAvailability
34	[4.0.0+] SetBackgroundRequestEnabled
35	[4.0.0+] GetScanData
36	[4.0.0+] GetCurrentAccessPoint
37	[4.0.0+] Shutdown
38	[6.0.0+] GetAllowedChannels
39	[8.0.0+] NotifyApplicationSuspended
40	[8.0.0+] SetAcceptableNetworkTypeFlag
41	[8.0.0+] GetAcceptableNetworkTypeFlag
42	[8.0.0+] NotifyConnectionStateChanged
43	[9.0.0+] #SetWowlDelayedWakeTime

GetClientId

Takes a type-0x1A output buffer containing a #ClientId, no output.

The wrapper for this with official sw will return 0 when any errors occur (wrapper returns #ClientId not Result).

CreateScanRequest

No input, returns an output #IScanRequest.

CreateRequest

Takes an input s32 "nn::nifm::RequirementPreset", returns an output #IRequest.

sdknso loads the s32 from "nn::nifm::RequestParameters", which has hard-coded value 0x2.

GetCurrentNetworkProfile

Takes a type-0x1A output buffer containing a #SfNetworkProfileData.

sdknso converts the output to #NetworkProfileData.

GetNetworkProfile

Takes an input "nn::util::Uuid" (same Uuid from #SfNetworkProfileData) and a type-0x1A output buffer containing a #SfNetworkProfileData.

sdknso converts the output to #NetworkProfileData.

SetNetworkProfile

Takes a type-0x19 input buffer containing a #SfNetworkProfileData and returns an output "nn::util::Uuid".

sdknso converts the input to #SfNetworkProfileData, which is then passed to the cmd.

This is only available with nifm:a.

GetCurrentIpAddress

No input, returns an output #IpV4Address.

GetCurrentIpConfigInfo

No input, returns an output #IpAddressSetting and a #DnsSetting.

IsAnyInternetRequestAccepted

Takes a type-0x19 input buffer containing a #ClientId, returns an output u8 bool.

The wrapper for this with official sw will return 0 when any errors occur (wrapper returns bool not Result).

SetWowlDelayedWakeTime

Takes an input s32, no output.

This requires nifm:a/nifm:s.

This goes through a list of objects to call a vfunc with the input value, that func then writes the input into the object state. The default value is 0. This field in state is later used for wlaninf cmd30.

IScanRequest

This is "nn::nifm::detail::IScanRequest".

Cmd	Name
0	Submit
1	IsProcessing
2	GetResult
3	GetSystemEventReadableHandle
4	[6.0.0+] SetChannels

IRequest

This is "nn::nifm::detail::IRequest".

This represents an application or sysmodule's request to bring a network up.

Cmd	Name
0	#GetRequestState
1	#GetResult
2	#GetSystemEventReadableHandles
3	#Cancel
4	#Submit
5	#SetRequirement
6	SetRequirementPreset
8	SetPriority
9	SetNetworkProfileId
10	SetRejectable
11	#SetConnectionConfirmationOption
12	#SetPersistent
13	SetInstant
14	SetSustainable
15	SetRawPriority
16	SetGreedy
17	SetSharable
18	SetRequirementByRevision
19	#GetRequirement
20	GetRevision
21	#GetAppletInfo
22	GetAdditionalInfo
23	[3.0.0+] #SetKeptInSleep
24	[3.0.0+] #RegisterSocketDescriptor
25	[3.0.0+] #UnregisterSocketDescriptor

GetRequestState

Number	Description
0	Set by sdknso when the cmd returns an error.
1	Not yet submitted or error
2	Pending (sdknso calls this OnHold)
3	Connected (sdknso calls this Available)
5

GetResult

No input/output.

If the request enters state 1, this command can be used to determine why. It responds with the nice networking error codes that there are support pages for.

GetSystemEventReadableHandles

No input, returns two Event handles. The first one signals when the RequestState changes.

This is used immediately after #CreateRequest.

sdknso uses EventClearMode=1 for the first Event, for the second Event this can be user-specified or a default value of 1.

Cancel

No input/output.

Cancels the request to bring the network up.

Submit

No input/output.

Submits the request to bring the network up. Call this after configuring the request.

SetRequirement

Takes a total of 0x20-bytes of input, no output.

[3.0.0+] Takes an additional 4-bytes of input.

SetConnectionConfirmationOption

Set how to verify the internet connection.

Option	Description
0
1
2	"Local" network (does not check for working DNS)
3
4	Default
5

SetPersistent

If this is set, when the network connection is lost, rather than causing the request to enter state 1, it will instead enter state 2 and attempt to bring the network back up again.

GetRequirement

No input, returns a total of 0x20-bytes of output.

[3.0.0+] Returns an additional 4-bytes of output.

GetAppletInfo

Takes an input u32, a type-0x6 output buffer, and 3 output u32s.

sdknso uses the output from this to launch a LibraryApplet.

The input u32 is set to the output from nn::applet::GetExpectedThemeColorForSystem().

The output u32s are: AppletId, LibraryAppletMode, out_size.

sdknso uses size 0x1000 for the buffer.

The out_size is the total data size written to the output buffer. The buffer contains an array of: {s32 size} {data with the specified size}, with size==-1 indicating that the end of the array was reached. The data from here is pushed as applet input storage.

The returned AppletId is one of the following: error, wifiWebAuth, or netConnect.

SetKeptInSleep

Takes an input bool, no output.

RequestState must be value 1. This sets a flag in state.

RegisterSocketDescriptor

Takes an input s32 sockfd, no output.

RequestState must be value 3. Only 1 socket can be registered at a time per IRequest. The specified sockfd is written into state.

During sleep-entry, wlan:inf cmd19 is eventually used with data from currently-open IRequest objects' registered-sockets. Note however, the wlaninf cmd only supports a single set of data, hence if there's more than 1 IRequest with a registered socket only the last object in the list will actually get used during wlan:inf RequestSleep.

UnregisterSocketDescriptor

Takes an input s32 sockfd, no output.

RequestState must be value 3. The input sockfd must match the one previously registered with #RegisterSocketDescriptor.

INetworkProfile

This is "nn::nifm::detail::INetworkProfile".

Cmd	Name
0	Update
1	PersistOld ([1.0.0-2.3.0] Persist)
2	[3.0.0+] Persist

ClientId

This is "nn::nifm::ClientId". This contains an u32.

SfNetworkProfileData

This is "nn::nifm::detail::sf::NetworkProfileData". This is a 0x17C-byte struct. This is converted to/from #NetworkProfileData by sdknso.

Offset	Size	Description
0x0	0xC2	#IpSettingData
0xC2	0x10	"nn::util::Uuid"
0xD2	0x40	NUL-terminated Network Name string
0x112	0x1
0x113	0x1
0x114	0x1
0x115	0x1
0x116	0x65	#SfWirelessSettingData
0x17B	0x1	Padding

NetworkProfileData

This is "nn::nifm::NetworkProfileData". This is converted from/to #SfNetworkProfileData by sdknso.

Offset	Size	Description
0x0	0x10	"nn::util::Uuid"
0x10	0x40	NUL-terminated Network Name string
0x50	0x4
0x54	0x4
0x58	0x1
0x59	0x1
0x5A	0x2	Padding
0x5C	0x70	#WirelessSettingData
0xCC	0xC2	#IpSettingData

SfWirelessSettingData

This is a 0x65-byte struct. This is converted to/from #WirelessSettingData during the #NetworkProfileData conversion.

Offset	Size	Description
0x0	0x1	SSID length (Clamped to max len 0x20 during #NetworkProfileData conversion)
0x1	0x20	SSID string
0x21	0x1
0x22	0x1
0x23	0x1
0x24	0x41	Passphrase

WirelessSettingData

This is "nn::nifm::WirelessSettingData". This is a 0x70-byte struct.

Offset	Size	Description
0x0	0x1	SSID length
0x1	0x21	NUL-terminated SSID string
0x22	0x1
0x23	0x1	Padding
0x24	0x4
0x28	0x4
0x2C	0x41	Passphrase
0x6D	0x3	Padding

IpSettingData

This is "nn::nifm::IpSettingData". This is a 0xC2-byte struct.

Offset	Size	Description
0x0	0xD	#IpAddressSetting
0xD	0x9	#DnsSetting
0x16	0xAA	#ProxySetting
0xC0	0x2	MTU

ProxySetting

This is "nn::nifm::ProxySetting". This is a 0xAA-byte struct.

Offset	Size	Description
0x0	0x1	Enables using the proxy when set.
0x1	0x1	Padding
0x2	0x2	Port
0x4	0x64	Server string, NUL-terminated.
0x68	0x1	Enables auto-authentication when set, which uses the following two strings.
0x69	0x20	User string, NUL-terminated.
0x89	0x20	Password string, NUL-terminated.
0xA9	0x1	Padding

IpV4Address

This is "nn::nifm::IpV4Address". This is a 0x4-byte struct.

sdknso copies this into struct in_addr.

IpAddressSetting

This is "nn::nifm::IpAddressSetting". This is a 0xD-byte struct.

Offset	Size	Description
0x0	0x1	Whether this setting is automatic. Ignored by #GetCurrentIpConfigInfo.
0x1	0x4	Copied to an output struct in_addr by sdknso. Same as the output from #GetCurrentIpAddress.
0x5	0x4	Copied to an output struct in_addr by sdknso. Subnet Mask.
0x9	0x4	Copied to an output struct in_addr by sdknso. Gateway.

DnsSetting

This is "nn::nifm::DnsSetting". This is a 0x9-byte struct.

Offset	Size	Description
0x0	0x1	Whether this setting is automatic. Ignored by #GetCurrentIpConfigInfo.
0x1	0x4	Copied to an output struct in_addr by sdknso. Primary DNS server.
0x5	0x4	Copied to an output struct in_addr by sdknso. Secondary DNS server.