wlan:inf
This is "nn::wlan::detail::IInfraManager".
| Cmd | Name |
|---|---|
| 0 | #OpenMode |
| 1 | #CloseMode |
| 2 | #GetMacAddress |
| 3 | #StartScan |
| 4 | #StopScan |
| 5 | #Connect |
| 6 | #CancelConnect |
| 7 | #Disconnect |
| 8 | #GetSystemEvent |
| 9 | #GetConnectionStatus |
| 10 | #GetState |
| 11 | #GetScanResult |
| 12 | #GetRssi |
| 13 | #ChangeRxAntenna |
| 14 | #GetFwVersion |
| 15 | #RequestSleep |
| 16 | #RequestWakeUp |
| 17 | #ConnectWithWps |
| 18 | [3.0.0+] |
| 19 | [3.0.0+] |
| 20 | [3.0.0+] |
| 21 | [3.0.0+] |
| 22 | [3.0.0+] |
| 23 | [3.0.0+] |
| 24 | [3.0.0+] |
| 25 | [3.0.0+] |
| 26 | [4.0.0+] |
| 27 | [4.0.0+] |
| 28 | [5.0.0+] #InitializeWlan |
| 29 | [7.0.0+] #FinalizeWlan |
| 30 | [8.0.0+] |
| 31 | [11.0.0+] |
| 32 | [11.0.0+] |
| 33 | [11.0.0+] |
| 34 | [11.0.0+] |
| 35 | [11.0.0+] |
| 36 | [11.0.0+] |
| 37 | [11.0.0+] |
| 38 | [13.0.0+] |
[4.0.0+] Connect now takes an additional 4-bytes of input.
[5.0.0+] Cmd24 now returns a total of 0x58-bytes of output instead of 0x5C.
[7.0.0+] Input/output for cmds 27/28 were swapped, perhaps these cmds were swapped?
OpenMode
No input/output.
Sends command message 0x6 to the state machine.
CloseMode
No input/output.
Sends command message 0x5 to the state machine.
GetMacAddress
No input. Returns an output #MacAddress.
Sends command message 0x18 to the state machine.
StartScan
Takes a type-0x15 input buffer. No output.
Sends command messages 0xA and 0x14 to the state machine.
StopScan
No input/output.
Sends command message 0x16 to the state machine.
Connect
Takes an input #ConnectParam. No output.
Sends command messages 0xA, 0x13 and 0x20 to the state machine.
CancelConnect
No input/output.
Sends command message 0x23 to the state machine.
Disconnect
No input/output.
Sends command message 0x24 to the state machine.
GetSystemEvent
Takes an input u32 SystemEventType. Returns an output Event handle.
GetConnectionStatus
No input. Returns an output #ConnectionStatus.
GetState
No input. Returns an output #State.
Sends command message 0x80 to the state machine.
GetScanResult
Takes a type-0x6 output buffer containing a #ScanResult. No output.
Sends command message 0x15 to the state machine.
GetRssi
No input. Returns an output u32 Rssi.
Sends command message 0x2E to the state machine.
ChangeRxAntenna
Takes an input u32. No output.
Sends command message 0x30 to the state machine.
GetFwVersion
Takes a type-0xA output buffer containing a #FwVersion. No output.
Sends command message 0x32 to the state machine.
RequestSleep
No input/output.
Sends command message 0x33 to the state machine.
RequestWakeUp
No input/output.
Sends command messages 0x1, 0x80 and 0x81 to the state machine.
ConnectWithWps
Takes a type-0x9 input buffer containing a #WpsPin and two input u32s WpsMethod and BeaconLostTimeout. No output.
Sends command messages 0xA, 0x13 and 0x21 to the state machine.
Cmd19
Takes a total of 0x18-bytes of input, no output.
This copies the input data into state, and sets a flag in state.
This data is used during RequestSleep if a state field is set for using it (the codepath using this will throw an error if this data was not set). This data is cleared afterwards regardless of whether it was used. This is used for configuring various config related to wowl/tcpka/etc (wake-on-WLAN/TCP keep-alive). Note that an error is thrown if "wowl_activate" isn't set but sysmodule-side doesn't do so (unless wifi-controller sets it automatically?).
This is used by nifm.
Cmd26
No input/output.
This sends a request which sets a global flag.
This flag is eventually checked by code which runs via RequestSleep, and in one case with wlan:dtc cmd19 (also used by requests done by nnMain).
Cmd27
Takes a type-0xA output buffer containing an array of 2-byte entries, returns an output u32 total_out.
This memcpys data from state into the output buffer, clamped to a maximum of 0x40 entries (nifm hard-codes the count to 0x26).
Cmd30
Takes an input s32, no output.
The input s32 must be <=0xE10 (3600) and >= -1. The input value is written into state, then this returns 0.
The user-process code using this cmd also has the above bounds check.
This cmd is used by nifm with a value from state, prior to using RequestSleep.
Cmd38
Takes an input u32 enum, no output.
The input value must be 0-1.
This internally sends a request which is then eventually handled (if the input doesn't match state already + other state fields are valid) by configuring "pm2_sleep_ret_ext" with a global struct selected via the input value. Afterwards another func is called with input value 2.
wlan:lcl
This is "nn::wlan::detail::ILocalManager".
| Cmd | Name |
|---|---|
| 0 | OpenMasterMode |
| 1 | CloseMasterMode |
| 2 | OpenClientMode |
| 3 | CloseClientMode |
| 4 | OpenSpectatorMode |
| 5 | CloseSpectatorMode |
| 6 | GetMacAddress |
| 7 | CreateBss |
| 8 | DestroyBss |
| 9 | StartScan |
| 10 | StopScan |
| 11 | Connect |
| 12 | CancelConnect |
| 13 | Join |
| 14 | CancelJoin |
| 15 | Disconnect |
| 16 | SetBeaconLostCount |
| 17 | GetSystemEvent |
| 18 | GetConnectionStatus |
| 19 | GetClientStatus |
| 20 | GetBssIndicationEvent |
| 21 | GetBssIndicationInfo |
| 22 | GetState |
| 23 | GetAllowedChannels |
| 24 | AddIe |
| 25 | DeleteIe |
| 26 | PutFrameRaw |
| 27 | CancelGetFrame |
| 28 | CreateRxEntry |
| 29 | DeleteRxEntry |
| 30 | AddEthertypeToRxEntry |
| 31 | DeleteEthertypeFromRxEntry |
| 32 | AddMatchingDataToRxEntry |
| 33 | RemoveMatchingDataFromRxEntry |
| 34 | GetScanResult |
| 35 | PutActionFrameOneShot |
| 36 | SetActionFrameWithBeacon |
| 37 | CancelActionFrameWithBeacon |
| 38 | CreateRxEntryForActionFrame |
| 39 | DeleteRxEntryForActionFrame |
| 40 | AddSubtypeToRxEntryForActionFrame |
| 41 | DeleteSubtypeFromRxEntryForActionFrame |
| 42 | CancelGetActionFrame |
| 43 | GetRssi |
| 44 | SetMaxAssociationNumber |
| 45 | [4.0.0+] |
| 46 | [4.0.0+] |
| 47 | [4.0.0+] |
| 48 | [10.0.0+] ([4.0.0-8.1.0]) |
| 49 | [6.0.0-8.1.0] |
| 50 | [6.0.0-8.1.0] |
| 51 | [8.0.0-8.1.0] |
| 52 | [8.0.0-8.1.0] |
| 49 | [13.0.0+] |
| 50 | [13.0.0+] |
| 51 | [13.0.0+] |
[4.0.0+] CreateBss, Connect, and Join now takes an additional 4-bytes of input.
[5.0.0+] GetAllowedChannels now returns a total of 4-bytes of output instead of 0x50, and now takes a type-0xA output buffer.
[9.0.0+] Almost all cmds had input/output changed / cmds moved around (?).
[10.0.0+] Cmd46 now takes a total of 1-byte of input instead of 6-bytes, while cmd47 now takes a total of 6-bytes of input instead of 1-byte.
wlan:lg
This is "nn::wlan::detail::ILocalGetFrame".
| Cmd | Name |
|---|---|
| 0 | GetFrameRaw |
wlan:lga
This is "nn::wlan::detail::ILocalGetActionFrame".
| Cmd | Name |
|---|---|
| 0 | GetActionFrame |
[5.0.0+] Cmd0 now takes an additional 4-bytes of input, and returns an additional 4-bytes of output.
wlan:sg
This is "nn::wlan::detail::ISocketGetFrame".
| Cmd | Name |
|---|---|
| 0 | GetFrameRaw |
wlan:soc
This is "nn::wlan::detail::ISocketManager".
| Cmd | Name |
|---|---|
| 0 | PutFrameRaw |
| 1 | CancelGetFrame |
| 2 | CreateRxEntry |
| 3 | DeleteRxEntry |
| 4 | AddEthertypeToRxEntry |
| 5 | DeleteEthertypeFromRxEntry |
| 6 | GetMacAddress |
| 7 | SwitchTsfTimerFunction |
| 8 | GetDeltaTimeBetweenSystemAndTsf |
| 9 | RegisterSharedMemory |
| 10 | UnregisterSharedMemory |
| 11 | EnableSharedMemory |
| 12 | [6.0.0+] |
wlan:dtc
This is "nn::wlan::detail::IDetectManager".
This was added with [6.0.0+].
| Cmd | Name |
|---|---|
| 0 | |
| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 | |
| 9 | |
| 10 | |
| 11 | |
| 12 | |
| 13 | |
| 14 | |
| 15 | |
| 16 | |
| 17 | |
| 18 | |
| 19 | |
| 20 | |
| 21 | |
| 22 | |
| 23 | |
| 24 | |
| 25 | |
| 26 | |
| 27 |
[7.0.0+] Cmd14 now takes an input u8.
Ssid
This is "nn::wlan::Ssid". This is a 0x20-byte struct.
MacAddress
This is a 0x6-byte struct with 1-byte alignment.
ConnectParam
This is a 0x80-byte struct.
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x20 | Ssid |
| 0x20 | 0x6 | Bssid |
| 0x26 | 0x2 | Reserved |
| 0x28 | 0x1 | |
| 0x29 | 0x1 | Reserved |
| 0x2A | 0x2 | Channel |
| 0x2C | 0x4 | PrivacyMode |
| 0x30 | 0x4 | GroupPrivacyMode |
| 0x34 | 0x4 | KeyIdx |
| 0x38 | 0x40 | SecurityKey |
| 0x78 | 0x4 | Reserved |
| 0x7C | 0x4 | BeaconLostTimeout |
ConnectionStatus
This is a 0x3C-byte struct.
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | |
| 0x4 | 0x4 | |
| 0x8 | 0x2 | Channel |
| 0xA | 0x6 | AccessPoint MAC address |
| 0x10 | 0x22 | u8 SSID_len, then the SSID data. |
| 0x32 | 0x2 | |
| 0x34 | 0x2 | |
| 0x36 | 0x2 | |
| 0x38 | 0x2 |
ScanResult
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | ScanBufferCapacity |
| 0x4 | 0x4 | BssInfoSize |
| 0x8 | 0x4 | BssInfoCount |
| 0xC | Variable | Array of #BssInfo |
BssInfo
This is a 0x58-byte struct.
State
| Value | Description |
|---|---|
| 0 | |
| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 | |
| 9 | |
| 10 | |
| 11 | |
| 12 | |
| 13 | |
| 14 | |
| 15 | |
| 16 | |
| 17 | |
| 18 | |
| 19 |
WpsPin
This is a 0x8-byte string.
FwVersion
This is a 0x100-byte string.
| System Version | Firmware String |
|---|---|
| [1.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-aoe Version: 7.35.252.58 CRC: f592f3bf Date: Tue 2016-10-04 23:54:54 PDT Ucode Ver: 1020.221 FWID: 01-5ec2fbfd |
| [2.0.0-2.2.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe Version: 7.35.64.1 CRC: 301f7804 Date: Fri 2017-02-17 01:03:01 PST Ucode Ver: 1020.223 FWID: 01-82d1f902 |
| [3.0.0-3.0.2] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.70 CRC: f3b554fd Date: Thu 2017-05-04 19:04:04 PDT Ucode Ver: 1020.223 FWID: 01-5d27fda5 |
| [4.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.75 (r666384) CRC: 58f59a6f Date: Wed 2017-08-16 22:27:11 PDT Ucode Ver: 1020.223 |
| [5.0.0-5.1.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.78.1.1 (r683984) CRC: 6a10caf9 Date: Wed 2018-02-21 21:43:01 PST Ucode Ver: 1020.223 FWID 01-ae4e196d |
| [6.0.0-6.2.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.84 (r692035) CRC: 937bcfc9 Date: Tue 2018-06-19 19:36:54 PDT Ucode Ver: 1020.225 FWID 01-71fd007e |
| [7.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.87 (r708450) CRC: 5f41af12 Date: Thu 2018-10-25 19:11:47 PDT Ucode Ver: 1020.226 FWID 01-377c0939 |
| [8.0.0-8.1.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.90 (r711053) CRC: 30dcf8a5 Date: Thu 2019-02-28 18:12:24 PST Ucode Ver: 1020.226 FWID 01-e691490c |
| [9.0.0-9.1.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.93 (r717555) CRC: d8363dad Date: Mon 2019-07-01 23:43:14 PDT Ucode Ver: 1020.228 FWID 01-c90a462 |
| [10.0.0-10.1.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.96 (r723441) CRC: f6823c05 Date: Tue 2019-11-19 22:31:29 PST Ucode Ver: 1020.228 FWID 01-a1b7e0a4 |
| [11.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.99 (r725630) CRC: 320007b0 Date: Mon 2020-05-25 19:51:18 PDT Ucode Ver: 1020.228 FWID 01-822b442d |
| [12.0.0-13.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.104 (r728022) CRC: f0b454ec Date: Wed 2021-02-24 04:39:25 PST Ucode Ver: 1020.228 FWID 01-fbba058 |
| [14.0.0] | 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.108 (c216b7c) CRC: 1be69227 Date: Sun 2021-08-29 19:24:39 PDT Ucode Ver: 1020.228 FWID 01-65333037 |
- [2.0.0+] Besides the version update, added "gtkoe" to the string.
- [3.0.0+] Besides the version update, added "tcpkaoe" to the string.
- [6.0.0+] Besides the version update, added "clm_4356a3_ntd" to the string.
- [7.0.0+] Besides the version update, added "noclminc" to the string.