nfc:am
This is "nn::nfc::am::detail::IAmManager".
Cmd | Name |
---|---|
0 | CreateAmInterface |
IAm
This is "nn::nfc::am::detail::IAm".
Cmd | Name |
---|---|
0 | Initialize |
1 | Finalize |
2 | NotifyForegroundApplet |
nfc:mf:u
This is "nn::nfc::mifare::detail::IUserManager".
Cmd | Name |
---|---|
0 | CreateUserInterface |
IUser
This is "nn::nfc::mifare::detail::IUser".
Cmd | Name |
---|---|
0 | #Initialize |
1 | #Finalize |
2 | ListDevices |
3 | StartDetection |
4 | StopDetection |
5 | Read |
6 | Write |
7 | GetTagInfo |
8 | GetActivateEventHandle |
9 | GetDeactivateEventHandle |
10 | #GetState |
11 | GetDeviceState |
12 | GetNpadId |
13 | [3.0.0+] GetAvailabilityChangeEventHandle |
nfc:user
This is "nn::nfc::detail::IUserManager".
Cmd | Name |
---|---|
0 | CreateUserInterface |
IUser
This is "nn::nfc::detail::IUser".
Cmd | Name |
---|---|
0 | InitializeOld |
1 | FinalizeOld |
2 | #GetStateOld |
3 | #IsNfcEnabledOld |
400 | [4.0.0+] #Initialize |
401 | [4.0.0+] #Finalize |
402 | [4.0.0+] #GetState |
403 | [4.0.0+] #IsNfcEnabled |
404 | [4.0.0+] ListDevices |
405 | [4.0.0+] GetDeviceState |
406 | [4.0.0+] GetNpadId |
407 | [4.0.0+] AttachAvailabilityChangeEvent |
408 | [4.0.0+] StartDetection |
409 | [4.0.0+] StopDetection |
410 | [4.0.0+] GetTagInfo |
411 | [4.0.0+] AttachActivateEvent |
412 | [4.0.0+] AttachDeactivateEvent |
1000 | [4.0.0+] #ReadMifare |
1001 | [4.0.0+] #WriteMifare |
1300 | [4.0.0+] #SendCommandByPassThrough |
1301 | [4.0.0+] #KeepPassThroughSession |
1302 | [4.0.0+] #ReleasePassThroughSession |
GetStateOld
No input, returns an output u32.
IsNfcEnabledOld
No input, returns an output bool.
This runs the same code as #IsNfcEnabled.
GetState
No input, returns an output u32.
This replaces #GetStateOld.
IsNfcEnabled
No input, returns an output bool.
This replaces #IsNfcEnabledOld.
nfc:sys
This is "nn::nfc::detail::ISystemManager".
Cmd | Name |
---|---|
0 | CreateSystemInterface |
ISystem
This is "nn::nfc::detail::ISystem".
Cmd | Name |
---|---|
0 | #Initialize |
1 | #Finalize |
2 | #GetStateOld |
3 | #IsNfcEnabledOld |
100 | SetNfcEnabledOld |
400 | [4.0.0+] InitializeSystem |
401 | [4.0.0+] FinalizeSystem |
402 | [4.0.0+] #GetState |
403 | [4.0.0+] #IsNfcEnabled |
404 | [4.0.0+] ListDevices |
405 | [4.0.0+] GetDeviceState |
406 | [4.0.0+] GetNpadId |
407 | [4.0.0+] AttachAvailabilityChangeEvent |
408 | [4.0.0+] StartDetection |
409 | [4.0.0+] StopDetection |
410 | [4.0.0+] GetTagInfo |
411 | [4.0.0+] AttachActivateEvent |
412 | [4.0.0+] AttachDeactivateEvent |
500 | [4.0.0+] #SetNfcEnabled |
510 | [7.0.0+] #OutputTestWave |
1000 | [4.0.0+] #ReadMifare |
1001 | [4.0.0+] #WriteMifare |
1300 | [4.0.0+] #SendCommandByPassThrough |
1301 | [4.0.0+] #KeepPassThroughSession |
1302 | [4.0.0+] #ReleasePassThroughSession |
SetNfcEnabled
Takes an input bool, no output.
OutputTestWave
Takes an input bool and a #TestWaveType, no output.
ReadMifare
Takes an input #DeviceHandle, a type-0x6 output buffer containing an array of #MifareReadBlockData, a type-0x5 input buffer containing an array of #MifareReadBlockParameter, no output.
sdknso passes the same user-specified array-count for both buffers.
WriteMifare
Takes an input #DeviceHandle, a type-0x5 input buffer containing an array of #MifareWriteBlockParameter, no output.
SendCommandByPassThrough
Takes an input #DeviceHandle, a nn::TimeSpan, a type-0x6 output buffer, a type-0x5 input buffer, returns an output u32 out_size.
sdknso copies the output u32 into an u64. This is the actual size which was copied into the output buffer.
This allows using a raw NFC command. The input buffer contains the command data (id + params), and the output buffer contains the response.
KeepPassThroughSession
Takes an input #DeviceHandle, no output.
ReleasePassThroughSession
Takes an input #DeviceHandle, no output.
nfp:user
This is "nn::nfp::detail::IUserManager".
Cmd | Name |
---|---|
0 | CreateUserInterface |
IUser
This is "nn::nfp::detail::IUser".
Cmd | Name |
---|---|
0 | #Initialize |
1 | #Finalize |
2 | ListDevices |
3 | StartDetection |
4 | StopDetection |
5 | Mount |
6 | Unmount |
7 | OpenApplicationArea |
8 | GetApplicationArea |
9 | SetApplicationArea |
10 | Flush |
11 | Restore |
12 | CreateApplicationArea |
13 | GetTagInfo |
14 | GetRegisterInfo |
15 | GetCommonInfo |
16 | GetModelInfo |
17 | AttachActivateEvent |
18 | AttachDeactivateEvent |
19 | #GetState |
20 | GetDeviceState |
21 | GetNpadId |
22 | GetApplicationAreaSize |
23 | [3.0.0+] AttachAvailabilityChangeEvent |
24 | [3.0.0+] RecreateApplicationArea |
Initialize
Takes a PID, an AppletResourceUserId, an u64, a type-0x5 input buffer containing an array of #RequiredMcuVersionData, no output.
sdknso passes value 0 for the u64.
Internally this is mostly the same for each service, this differs depending on the service/cmd however.
Finalize
No input/output.
Internally this is mostly the same for each service, this differs depending on the service/cmd however.
nfp:dbg
This is "nn::nfp::detail::IDebugManager".
Cmd | Name |
---|---|
0 | CreateDebugInterface |
IDebug
This is "nn::nfp::detail::IDebug".
Cmd | Name |
---|---|
0 | InitializeDebug |
1 | FinalizeDebug |
2 | ListDevices |
3 | StartDetection |
4 | StopDetection |
5 | Mount |
6 | Unmount |
7 | OpenApplicationArea |
8 | GetApplicationArea |
9 | SetApplicationArea |
10 | Flush |
11 | Restore |
12 | CreateApplicationArea |
13 | GetTagInfo |
14 | GetRegisterInfo |
15 | GetCommonInfo |
16 | GetModelInfo |
17 | AttachActivateEvent |
18 | AttachDeactivateEvent |
19 | #GetState |
20 | GetDeviceState |
21 | GetNpadId |
22 | GetApplicationArea2 |
23 | [3.0.0+] AttachAvailabilityChangeEvent |
24 | [3.0.0+] RecreateApplicationArea |
100 | Format |
101 | GetAdminInfo |
102 | GetRegisterInfo |
103 | SetRegisterInfo |
104 | DeleteRegisterInfo |
105 | DeleteApplicationArea |
106 | ExistsApplicationArea |
200 | GetAll |
201 | SetAll |
202 | FlushDebug |
203 | BreakTag |
204 | ReadBackupData |
205 | WriteBackupData |
206 | #WriteNtf |
300 | [3.0.0-3.0.2] |
301 | [3.0.0-3.0.2] |
302 | [3.0.0-3.0.2] |
303 | [3.0.0-3.0.2] |
304 | [3.0.0-3.0.2] |
305 | [3.0.0-3.0.2] |
306 | [3.0.0-3.0.2] |
307 | [3.0.0-3.0.2] |
308 | [3.0.0-3.0.2] |
309 | [3.0.0-3.0.2] |
310 | [3.0.0-3.0.2] |
311 | [3.0.0-3.0.2] |
312 | [3.0.0-3.0.2] |
313 | [3.0.0-3.0.2] |
314 | [3.0.0-3.0.2] |
WriteNtf
Takes an input #DeviceHandle, an u32, a type-0x5 input buffer, no output.
The input buffer size must match 0x2A0.
This handles Amiibo crypto etc.
nfp:sys
This is "nn::nfp::detail::ISystemManager".
Cmd | Name |
---|---|
0 | CreateSystemInterface |
ISystem
This is "nn::nfp::detail::ISystem".
Cmd | Name |
---|---|
0 | InitializeSystem |
1 | FinalizeSystem |
2 | ListDevices |
3 | StartDetection |
4 | StopDetection |
5 | Mount |
6 | Unmount |
10 | Flush |
11 | Restore |
13 | GetTagInfo |
14 | GetRegisterInfo |
15 | GetCommonInfo |
16 | GetModelInfo |
17 | AttachActivateEvent |
18 | AttachDeactivateEvent |
19 | #GetState |
20 | GetDeviceState |
21 | GetNpadId |
23 | [3.0.0+] AttachAvailabilityChangeEvent |
100 | Format |
101 | GetAdminInfo |
102 | GetRegisterInfo |
103 | SetRegisterInfo |
104 | DeleteRegisterInfo |
105 | DeleteApplicationArea |
106 | ExistsApplicationArea |
RequiredMcuVersionData
In sdknso, the global data containing the array data for this is "nn::nfc::client::RequiredMcuVersionData". The array entry is 0x20-bytes.
DeviceHandle
This is "nn::nfc::DeviceHandle". This is a 8-byte struct with 4-byte alignment.
TestWaveType
This is u32 enum "nn::nfc::TestWaveType".
MifareReadBlockData
This is "nn::nfc::MifareReadBlockData". This is a 0x18-byte struct.
MifareReadBlockParameter
This is "nn::nfc::MifareReadBlockParameter". This is a 0x18-byte struct.
MifareWriteBlockParameter
This is "nn::nfc::MifareWriteBlockParameter". This is a 0x28-byte struct.
RomFS
[9.0.0+] The nfc-sysmodule RomFS contains:
ST21NFCD_01_05_6811.bin
These are firmware files for the NFC IC inside Switch Lite units.
Application IDs
Application IDs (also referenced as "access_id" in official software) are game-unique u32s used to access the amiibo 0xd8-big application area.
Game | AppID |
---|---|
Super Smash Bros. Ultimate | 0x34f80200 |