Audio services
audout:u
This is "nn::audio::detail::IAudioOutManager".
| Cmd | Name |
|---|---|
| 0 | #ListAudioOuts |
| 1 | #OpenAudioOut |
| 2 | [3.0.0+] #ListAudioOutsAuto |
| 3 | [3.0.0+] #OpenAudioOutAuto |
ListAudioOuts
Takes a type-6 output buffer. Populates the output buffer with the available audio output devices' names and returns an u32 with the number of device names written.
OpenAudioOut
Takes a type-5 input buffer (DeviceNameIn), a type-6 output buffer (DeviceNameOut), two u32s SampleRate (must be 48000) and ChannelCount (only the higher u16 is used), one u64 ClientPID, a PID and a copy-handle. Returns an #IAudioOut object and four u32s: the sample rate, channel count, PCM format, and the initial AudioOutState.
PCM format
| Value | Name |
|---|---|
| 0 | Invalid |
| 1 | INT8 |
| 2 | INT16 |
| 3 | INT24 |
| 4 | INT32 |
| 5 | PCM Float |
| 6 | ADPCM |
ListAudioOutsAuto
Same as #ListAudioOuts, but takes a type-0x22 output buffer instead.
OpenAudioOutAuto
Same as #OpenAudioOut, but takes a type-0x21 input buffer instead.
IAudioOut
This is "nn::audio::detail::IAudioOut".
| Cmd | Name |
|---|---|
| 0 | #GetAudioOutState |
| 1 | #StartAudioOut |
| 2 | #StopAudioOut |
| 3 | #AppendAudioOutBuffer |
| 4 | #RegisterBufferEvent |
| 5 | #GetReleasedAudioOutBuffer |
| 6 | #ContainsAudioOutBuffer |
| 7 | [3.0.0+] #AppendAudioOutBufferAuto |
| 8 | [3.0.0+] #GetReleasedAudioOutBufferAuto |
| 9 | [4.0.0+] GetAudioOutBufferCount |
| 10 | [4.0.0+] GetAudioOutPlayedSampleCount |
| 11 | [4.0.0+] FlushAudioOutBuffers |
| 12 | [6.0.0+] SetAudioOutVolume |
| 13 | [6.0.0+] GetAudioOutVolume |
GetAudioOutState
Returns an u32 AudioOutState (0x00=Started, 0x01=Stopped).
StartAudioOut
Starts audio playback using data from appended buffers.
StopAudioOut
Stops audio playback. This waits for audio playback to finish before returning.
AppendAudioOutBuffer
Takes a type-5 input buffer for sample data and a u64 which acts as a tag for the supplied buffer (official apps use the buffer's address).
The format of the input buffer is as follows:
| Offset | Size | Description |
|---|---|---|
| 0x00 | 8 | Pointer to next buffer (unused) |
| 0x08 | 8 | Pointer to sample buffer |
| 0x10 | 8 | Capacity of sample buffer |
| 0x18 | 8 | Size of data in the sample buffer |
| 0x20 | 8 | Offset of data in the sample buffer (unused/ignored?) |
RegisterBufferEvent
Returns an event handle that is signalled when a buffer is released.
GetReleasedAudioOutBuffer
Takes a type-6 output buffer which will be filled with the identifiers from #AppendAudioOutBuffer of audio buffers that have been released. Returns an u32 ReleasedBuffersCount.
ContainsAudioOutBuffer
Takes an u64 tag for the desired buffer. Returns 1 if the buffer was appended and not yet released.
AppendAudioOutBufferAuto
Same as #AppendAudioOutBuffer but takes a type-0x21 buffer instead.
GetReleasedAudioOutBufferAuto
Same as #GetReleasedAudioOutBuffer but takes a type-0x22 buffer instead.
audin:u
This is "nn::audio::detail::IAudioInManager".
| Cmd | Name |
|---|---|
| 0 | ListAudioIns |
| 1 | OpenAudioIn |
| 2 | [3.0.0+] ListAudioInsAuto |
| 3 | [3.0.0+] OpenAudioInAuto |
| 4 | [3.0.0+] ListAudioInsAutoFiltered |
IAudioIn
This is "nn::audio::detail::IAudioIn".
| Cmd | Name |
|---|---|
| 0 | #GetAudioInState |
| 1 | StartAudioIn |
| 2 | StopAudioIn |
| 3 | AppendAudioInBuffer |
| 4 | RegisterBufferEvent |
| 5 | GetReleasedAudioInBuffer |
| 6 | ContainsAudioInBuffer |
| 7 | [3.0.0+] AppendAudioInBufferWithUserEvent |
| 8 | [3.0.0+] AppendAudioInBufferAuto |
| 9 | [3.0.0+] GetReleasedAudioInBufferAuto |
| 10 | [3.0.0+] AppendAudioInBufferWithUserEventAuto |
| 11 | [4.0.0+] GetAudioInBufferCount |
| 12 | [4.0.0+] SetAudioInDeviceGain |
| 13 | [4.0.0+] GetAudioInDeviceGain |
| 14 | [6.0.0+] FlushAudioInBuffers |
GetAudioInState
Returns an u32 AudioInState (0x00=Started, 0x01=Stopped).
audrec:u
This is "nn::audio::detail::IFinalOutputRecorderManager".
| Cmd | Name |
|---|---|
| 0 | OpenFinalOutputRecorder |
IFinalOutputRecorder
This is "nn::audio::detail::IFinalOutputRecorder".
| Cmd | Name |
|---|---|
| 0 | GetFinalOutputRecorderState |
| 1 | StartFinalOutputRecorder |
| 2 | StopFinalOutputRecorder |
| 3 | AppendFinalOutputRecorderBuffer |
| 4 | RegisterBufferEvent |
| 5 | GetReleasedFinalOutputRecorderBuffer |
| 6 | ContainsFinalOutputRecorderBuffer |
| 7 | GetFinalOutputRecorderBufferEndTime |
| 8 | [3.0.0+] AppendFinalOutputRecorderBufferAuto |
| 9 | [3.0.0+] GetReleasedFinalOutputRecorderBufferAuto |
| 10 | [6.0.0+] FlushFinalOutputRecorderBuffers |
audren:u
This is "nn::audio::detail::IAudioRendererManager".
| Cmd | Name |
|---|---|
| 0 | OpenAudioRenderer |
| 1 | GetAudioRendererWorkBufferSize |
| 2 | #GetAudioDeviceService |
| 3 | [3.0.0+] OpenAudioRendererAuto |
| 4 | [4.0.0+] GetAudioDeviceServiceWithRevisionInfo |
GetAudioDeviceService
Takes an input u64 AppletResourceUserId, returns an output #IAudioDevice.
IAudioRenderer
This is "nn::audio::detail::IAudioRenderer".
| Cmd | Name |
|---|---|
| 0 | #GetSampleRate |
| 1 | #GetSampleCount |
| 2 | #GetMixBufferCount |
| 3 | #GetState |
| 4 | RequestUpdate |
| 5 | Start |
| 6 | Stop |
| 7 | QuerySystemEvent |
| 8 | #SetRenderingTimeLimit |
| 9 | #GetRenderingTimeLimit |
| 10 | [3.0.0+] RequestUpdateAuto |
| 11 | [3.0.0+] ExecuteAudioRendererRendering |
GetSampleRate
Returns the Sample Rate. (u32)
GetSampleCount
Returns the Sample Count. (u32)
GetMixBufferCount
Returns the number of Mix Buffers. (u32)
GetAudioRendererState
Returns an AudioRenderState, 0x00=Started 0x01=Stopped (u32)
SetRenderingTimeLimit
Takes a upper limit of the rendering time in percent. (u32)
GetRenderingTimeLimit
Returns the upper limit of the rendering time in percent. (u32)
IAudioDevice
This is "nn::audio::detail::IAudioDevice".
| Cmd | Name |
|---|---|
| 0 | #ListAudioDeviceName |
| 1 | #SetAudioDeviceOutputVolume |
| 2 | #GetAudioDeviceOutputVolume |
| 3 | GetActiveAudioDeviceName |
| 4 | QueryAudioDeviceSystemEvent |
| 5 | GetActiveChannelCount |
| 6 | [3.0.0+] #ListAudioDeviceNameAuto |
| 7 | [3.0.0+] #SetAudioDeviceOutputVolumeAuto |
| 8 | [3.0.0+] #GetAudioDeviceOutputVolumeAuto |
| 10 | [3.0.0+] GetActiveAudioDeviceNameAuto |
| 11 | [3.0.0+] QueryAudioDeviceInputEvent |
| 12 | [3.0.0+] QueryAudioDeviceOutputEvent |
| 13 | [5.0.0+] GetAudioSystemMasterVolumeSetting |
ListAudioDeviceName
Takes a type-0x6 output buffer containing an array of DeviceName, returns an output s32 for total number of output entries.
SetAudioDeviceOutputVolume
Takes a type-0x5 input buffer containing the DeviceName and a float. No output.
GetAudioDeviceOutputVolume
Takes a type-0x5 input buffer containing the DeviceName. Returns an output float.
ListAudioDeviceNameAuto
Takes a type-0x22 output buffer containing an array of DeviceName, returns an output s32 for total number of output entries.
SetAudioDeviceOutputVolumeAuto
Takes a type-0x21 input buffer containing the DeviceName and a float. No output.
GetAudioDeviceOutputVolumeAuto
Takes a type-0x21 input buffer containing the DeviceName. Returns an output float.
audout:a
This is "nn::audio::detail::IAudioOutManagerForApplet".
| Cmd | Name |
|---|---|
| 0 | RequestSuspendAudioOuts |
| 1 | RequestResumeAudioOuts |
| 2 | GetAudioOutsProcessMasterVolume |
| 3 | SetAudioOutsProcessMasterVolume |
| 4 | [4.0.0+] GetAudioOutsProcessRecordVolume |
| 5 | [4.0.0+] SetAudioOutsProcessRecordVolume |
audin:a
This is "nn::audio::detail::IAudioInManagerForApplet".
| Cmd | Name |
|---|---|
| 0 | RequestSuspendAudioIns |
| 1 | RequestResumeAudioIns |
| 2 | GetAudioInsProcessMasterVolume |
| 3 | SetAudioInsProcessMasterVolume |
audrec:a
This is "nn::audio::detail::IFinalOutputRecorderManagerForApplet".
| Cmd | Name |
|---|---|
| 0 | RequestSuspendFinalOutputRecorders |
| 1 | RequestResumeFinalOutputRecorders |
audren:a
This is "nn::audio::detail::IAudioRendererManagerForApplet".
| Cmd | Name |
|---|---|
| 0 | RequestSuspendAudioRenderers |
| 1 | RequestResumeAudioRenderers |
| 2 | GetAudioRenderersProcessMasterVolume |
| 3 | SetAudioRenderersProcessMasterVolume |
| 4 | RegisterAppletResourceUserId |
| 5 | UnregisterAppletResourceUserId |
| 6 | [4.0.0+] GetAudioRenderersProcessRecordVolume |
| 7 | [4.0.0+] SetAudioRenderersProcessRecordVolume |
audout:d, audin:d, audrec:d, audren:d
This is "nn::audio::detail::IAudioOutManagerForDebugger", "nn::audio::detail::IAudioInManagerForDebugger", "nn::audio::detail::IFinalOutputRecorderManagerForDebugger", "nn::audio::detail::IAudioRendererManagerForDebugger".
| Cmd | Name |
|---|---|
| 0 | #RequestSuspendForDebug |
| 1 | #RequestResumeForDebug |
RequestSuspendForDebug
Takes an u64 AppletResourceUserId.
RequestResumeForDebug
Takes an u64 AppletResourceUserId.
audctl
This is "nn::audioctrl::detail::IAudioController".
| Cmd | Name |
|---|---|
| 0 | GetTargetVolume |
| 1 | SetTargetVolume |
| 2 | GetTargetVolumeMin |
| 3 | GetTargetVolumeMax |
| 4 | IsTargetMute |
| 5 | SetTargetMute |
| 6 | IsTargetConnected |
| 7 | SetDefaultTarget |
| 8 | GetDefaultTarget |
| 9 | GetAudioOutputMode |
| 10 | SetAudioOutputMode |
| 11 | SetForceMutePolicy |
| 12 | GetForceMutePolicy |
| 13 | GetOutputModeSetting |
| 14 | SetOutputModeSetting |
| 15 | SetOutputTarget |
| 16 | SetInputTargetForceEnabled |
| 17 | [3.0.0+] SetHeadphoneOutputLevelMode |
| 18 | [3.0.0+] GetHeadphoneOutputLevelMode |
| 19 | [3.0.0+] AcquireAudioVolumeUpdateEventForPlayReport |
| 20 | [3.0.0+] AcquireAudioOutputDeviceUpdateEventForPlayReport |
| 21 | [3.0.0+] GetAudioOutputTargetForPlayReport |
| 22 | [3.0.0+] NotifyHeadphoneVolumeWarningDisplayedEvent |
| 23 | [4.0.0+] SetSystemOutputMasterVolume |
| 24 | [4.0.0+] GetSystemOutputMasterVolume |
| 25 | [4.0.0+] GetAudioVolumeDataForPlayReport |
| 26 | [4.0.0+] UpdateHeadphoneSettings |
codecctl
This is "nn::audio::detail::ICodecController".
This service no longer exists in [3.0.0+].
InitializeCodecController
Takes no input.
FinalizeCodecController
Takes no input.
SleepCodecController
Takes no input.
WakeCodecController
Takes no input.
SetCodecVolume
Takes an u32 Volume.
GetCodecVolumeMax
Returns an u32 VolumeMax.
GetCodecVolumeMin
Returns an u32 VolumeMin.
SetCodecActiveTarget
Takes an u32 Target.
GetCodecActiveTarget
Returns an u32 Target.
BindCodecHeadphoneMicJackInterrupt
Returns an event handle.
IsCodecHeadphoneMicJackInserted
Returns a bool.
ClearCodecHeadphoneMicJackInterrupt
Takes no input.
IsCodecDeviceRequested
Returns a bool.
hwopus
This is "nn::codec::detail::IHardwareOpusDecoderManager".
| Cmd | Name |
|---|---|
| 0 | #Initialize |
| 1 | #GetWorkBufferSize |
| 2 | [3.0.0+] #OpenHardwareOpusDecoderForMultiStream |
| 3 | [3.0.0+] #GetWorkBufferSizeForMultiStream |
Official sw can use either software libopus, or hwopus via "nn::codec::HardwareOpus*" (separate from the former).
Initialize
Takes two s32s SampleRate and ChannelCount packed as an u64, an u32 WorkBufferSize and a TransferMemory handle for WorkBuffer. Returns an #IHardwareOpusDecoder object. The TransferMemory is created by the user-process with permissions=0.
GetWorkBufferSize
Takes two s32s SampleRate and ChannelCount packed as an u64. Returns the u32 required size for the decoder's work buffer. Official user-processes align the output size to page-alignment.
OpenHardwareOpusDecoderForMultiStream
Takes a type-0x19 input buffer, an u32 WorkBufferSize and a TransferMemory handle for WorkBuffer. Returns an #IHardwareOpusDecoder object. The TransferMemory is created by the user-process with permissions=0.
The input buffer is a #MultiStreamParameters struct. The user-process initializes this struct the same way as #GetWorkBufferSizeForMultiStream, except that an u8-array specified by the user is copied to +0x10 with size ChannelCount, when ChannelCount above 0.
GetWorkBufferSizeForMultiStream
Takes a type-0x19 input buffer. Returns the u32 required size for the decoder's work buffer. Official user-processes align the output size to page-alignment.
The input buffer is a #MultiStreamParameters struct.
MultiStreamParameters
| Offset | Size | Description |
|---|---|---|
| 0x0 | 0x4 | Sample rate (Hz) |
| 0x4 | 0x4 | Number of channels |
| 0x8 | 0x4 | Number of streams |
| 0xC | 0x4 | Number of stereo streams |
| 0x10 | 0x100 | u8 array of channel mappings |
IHardwareOpusDecoder
This is "nn::codec::detail::IHardwareOpusDecoder".
| Cmd | Name |
|---|---|
| 0 | [4.0.0+] #DecodeInterleavedOld ([1.0.0-3.0.2] #DecodeInterleaved) |
| 1 | #SetContext |
| 2 | [4.0.0+] #DecodeInterleavedForMultiStreamOld ([3.0.0-3.0.2] DecodeInterleavedForMultiStream) |
| 3 | [3.0.0+] #SetContextForMultiStream |
| 4 | [6.0.0+] #DecodeInterleavedWithPerfOld ([4.0.0-5.1.0] DecodeInterleavedWithPerf) |
| 5 | [6.0.0+] #DecodeInterleavedForMultiStreamWithPerfOld ([4.0.0-5.1.0] DecodeInterleavedForMultiStreamWithPerf) |
| 6 | [6.0.0+] #DecodeInterleaved |
| 7 | [6.0.0+] #DecodeInterleavedForMultiStream |
DecodeInterleavedOld
Takes a type-5 input buffer (OpusDataIn) and a type-6 output buffer (PcmDataOut). Decodes the Opus source data to PCM and returns output s32 DecodedDataSize and s32 DecodedSampleCount.
Calls the same func as #DecodeInterleaved internally with flag=0 and out_u64_ptr=NULL.
SetContext
Takes a type-5 input buffer (DecoderContextIn). Sends the unknown context data to the hardware decoder. The input buffer is unused.
DecodeInterleavedForMultiStreamOld
Takes a type-5 input buffer (OpusDataIn) and a type-6 output buffer (PcmDataOut). Decodes the Opus source data to PCM and returns output s32 DecodedDataSize and s32 DecodedSampleCount.
Calls the same func as #DecodeInterleavedForMultiStream internally with flag=0 and out_u64_ptr=NULL.
SetContextForMultiStream
Takes a type-5 input buffer (DecoderContextIn). Sends the unknown context data to the hardware decoder.
DecodeInterleavedWithPerfOld
Takes a type-0x5 input buffer (OpusDataIn) and a type-0x46 output buffer (PcmDataOut). Decodes the Opus source data to PCM and returns output s32 DecodedDataSize, s32 DecodedSampleCount, and an u64.
The output u64 is ignored by official user-processes.
Calls the same func as #DecodeInterleaved internally with flag=0.
DecodeInterleavedForMultiStreamWithPerfOld
Takes a type-0x5 input buffer (OpusDataIn) and a type-0x46 output buffer (PcmDataOut). Decodes the Opus source data to PCM and returns output s32 DecodedDataSize, s32 DecodedSampleCount, and an u64.
The output u64 is ignored by official user-processes.
Calls the same func as #DecodeInterleavedForMultiStream internally with flag=0.
DecodeInterleaved
Takes an input u8 bool flag, a type-0x5 input buffer (OpusDataIn) and a type-0x46 output buffer (PcmDataOut). Decodes the Opus source data to PCM and returns output s32 DecodedDataSize, s32 DecodedSampleCount, and an u64.
The bool flag indicates whether or not a reset of the decoder context is being requested.
DecodeInterleavedForMultiStream
Takes an input u8 bool flag, a type-0x5 input buffer (OpusDataIn) and a type-0x46 output buffer (PcmDataOut). Decodes the Opus source data to PCM and returns output s32 DecodedDataSize, s32 DecodedSampleCount, and an u64.
The bool flag indicates whether or not a reset of the decoder context is being requested.
auddebug
This is "nn::audio::detail::IAudioDebugManager".
This service doesn't exist in retail units.
| Cmd | Name |
|---|---|
| 0 | StartDspProfiler |
| 1 | StopDspProfiler |
| 2 | StartCpuProfiler |
| 3 | StopCpuProfiler |