Testpads
Jump to navigation
Jump to search
The Nintendo Switch mainboard has a series of testpads on the front and back, presumably used in factory test, diagnostics, and early board bringup procedures.
Raw Logic captures
These are reference materials, taken from poking at I/O on various testpads. https://github.com/hedgeberg/Switch-Logic-Captures
Photos
Pinouts
Cluster A
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
1 | Batt GND? | |||||
2 | Battery pulse? | Pulse train | 0-3.3V | L-5? | ||
3 | Battery Vdd | |||||
4 | ?? | Square wave | 0-3.3V | 329kHz? (undersampled?) | Square wave when screen on, but looks like vias to Speaker R | |
5 | ?? | Square wave | 0-3.3V | 329kHz? (undersampled?) | Square wave when screen on, but looks like vias to Speaker R | |
6 | Weak GND? | |||||
7 | SDA | I2C | 0-1.8V | |||
8 | SCL | I2C | 0-1.8V | |||
9 | USB-PWR-WAVE? | Square wave | 0-3.3V | K-4, K-5? | ~11 Hz | |
10 | USB-PWR-WAVE? | Square wave | 0-3.3V | K-4, K-5? | ~11 Hz |
Cluster B
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
2 | D+ | USB-C | Cluster B - 3 | |||
3 | D- | USB-C | Cluster B - 2 |
Cluster C
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
1 | ?? | 0-1.8V | No clue. This is definitely important, we just have no idea how. May need to interface with dock for comms. | |||
2 | UART-A RX | 0-1.8V | ||||
3 | UART-A TX | 0-1.8V | ||||
4 | ?? | 0-1.8V | ||||
5 | ?? | 0-1.8V | ||||
6 | ?? | 0-1.8V | ||||
7 | ?? | 0-1.8V | ||||
8 | ?? | 0-1.8V | ||||
9 | ?? | 0-1.8V | ||||
10 | ?? | 0-1.8V | ||||
11 | ?? | 0-1.8V |
Cluster D
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
4 | Seaker L + | Speaker Left + | ||||
5 | Seaker L - | Speaker Left - |
Cluster E
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
1 | Vol (-) | Button Vol (-) | ||||
10 | Reset |
Cluster G
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
4 | Vol(+) | Button Vol (+) | ||||
9 | BUTTON_HOME | RCM strap |
Cluster I
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
1 | GND | |||||
2 | Screen_on | On/Off | 0-1.8V | Screen power state, active high | ||
3 | UART | 0-1.8V | 1.5MBaud? | |||
4 | UART | 0-1.8V | 1.5MBaud? | |||
5 | Flow control | 0-1.8V | Flow control for pad I-4? | |||
6 | 0-1.8V | Needs testing with chip/touch screen interface board plugged in |
Cluster J
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
1 | ? | Edge | 0-1.8V | Turns on around same time as pad J-3 | ||
2 | GND | |||||
3 | ? | Edge | 0-1.8V | Turns on around same time as pad J-1, slightly after | ||
4 | Power button | Pushbutton | 4V-0V | Active low | ||
5 | ? | Constant? | 0V | Ground?-NT | ||
6 | ? | Edge | 0-1.8V | Turns on with pad J-6, ~1s after J-1/J-3 | ||
7 | ? | Edge | 0-1.8V | Turns on with pad J-5, ~1s after J-1/J-3 | ||
8 | ? | Edge? | 0-1.8V | Turns on ~1s after J-6/J-7, turns off at unknown point |
Cluster K
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
1 | GND | |||||
2 | D- | USB-C | Cluster B - 3 | |||
3 | D+ | USB-C | Cluster B - 2 | |||
4 | USB-PWR-WAVE? | Square wave | 0V-3.3V | A-9, A-10? | ~11 Hz | |
5 | USB-PWR-WAVE? | Square wave | 0V-3.3V | A-9, A-10? | ~11 Hz | Appears to mirror K4. Duty cycle 66.67%. Low on screen lock. Off until first interaction. |
6 | USB-C V+ | Supply power | ||||
7 | Unknown | Power supply? | ~3V-0V | None known | N/A | 0 when usb-c not plugged in, falls slowly on first interaction if USB-C plugged in. Power draw related? |
Cluster L
TODO: Update diagram
Pad # | Name | Type | Levels | Continuity | Frequency | Comment |
---|---|---|---|---|---|---|
1 | Li-Ion Batt Vdd Mirror | Power Supply | Std. Li-Ion | |||
2 | GND | |||||
3 | Li-Ion Batt Vdd | Battery Input | Std. Li-Ion | |||
4 | Mirrored Ground? | Holds steady @ 0, looks like a decoupled isolated ground | ||||
5 | Battery pulse? | <1 Hz | Duty cycle ~0% | |||
6 | GND |