WLAN services

From Nintendo Switch Brew
Revision as of 17:58, 1 June 2022 by Hexkyz (talk | contribs)
Jump to navigation Jump to search

wlan:inf

This is "nn::wlan::detail::IInfraManager".

Cmd Name
0 #OpenMode
1 #CloseMode
2 #GetMacAddress
3 #StartScan
4 #StopScan
5 #Connect
6 #CancelConnect
7 #Disconnect
8 #GetSystemEvent
9 #GetConnectionStatus
10 #GetState
11 #GetScanResult
12 #GetRssi
13 #ChangeRxAntenna
14 #GetFwVersion
15 #RequestSleep
16 #RequestWakeUp
17 #ConnectWithWps
18 [3.0.0+]
19 [3.0.0+]
20 [3.0.0+]
21 [3.0.0+]
22 [3.0.0+]
23 [3.0.0+]
24 [3.0.0+]
25 [3.0.0+]
26 [4.0.0+]
27 [4.0.0+]
28 [5.0.0+] #InitializeWlan
29 [7.0.0+] #FinalizeWlan
30 [8.0.0+]
31 [11.0.0+]
32 [11.0.0+]
33 [11.0.0+]
34 [11.0.0+]
35 [11.0.0+]
36 [11.0.0+]
37 [11.0.0+]
38 [13.0.0+]

[4.0.0+] Connect now takes an additional 4-bytes of input.

[5.0.0+] Cmd24 now returns a total of 0x58-bytes of output instead of 0x5C.

[7.0.0+] Input/output for cmds 27/28 were swapped, perhaps these cmds were swapped?

OpenMode

No input/output.

Sends command message 0x6 (SetWlanMode6) to the state machine.

CloseMode

No input/output.

Sends command message 0x5 (SetWlanMode5) to the state machine.

GetMacAddress

No input. Returns an output #MacAddress.

Sends command message 0x18 (GetMacAddress) to the state machine.

StartScan

Takes a type-0x15 input buffer buffer containing a #ScanRequest. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown) and 0x14 (ScanRequest) to the state machine.

StopScan

No input/output.

Sends command message 0x16 (CancelScan) to the state machine.

Connect

Takes an input #ConnectParam. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown), 0x13 (SetBeaconLostTimeout) and 0x20 (JoinNetworkSta) to the state machine.

CancelConnect

No input/output.

Sends command message 0x23 (CancelJoinNetwork) to the state machine.

Disconnect

No input/output.

Sends command message 0x24 (DisconnectRequest) to the state machine.

GetSystemEvent

Takes an input u32 SystemEventType. Returns an output Event handle.

GetConnectionStatus

No input. Returns an output #ConnectionStatus.

Sends command message 0x80 (GetState) to the state machine.

GetState

No input. Returns an output #State.

Sends command message 0x80 (GetState) to the state machine.

GetScanResult

Takes a type-0x6 output buffer containing a #ScanResult. No output.

Sends command message 0x15 (BssInfoListGet) to the state machine.

GetRssi

No input. Returns an output u32 Rssi.

Sends command message 0x2E (GetRssi) to the state machine.

ChangeRxAntenna

Takes an input u32. No output.

Sends command message 0x30 (SetRxChain) to the state machine.

GetFwVersion

Takes a type-0xA output buffer containing a #FwVersion. No output.

Sends command message 0x32 (GetFwVersion) to the state machine.

RequestSleep

No input/output.

Sends command message 0x33 (RequestSleep) to the state machine.

RequestWakeUp

No input/output.

Sends command messages 0x1 (InitalizeWlanDriver), 0x80 (GetState) and 0x81 (GetStateBeforeSleep) to the state machine.

ConnectWithWps

Takes a type-0x9 input buffer containing a #WpsPin and two input u32s WpsMethod and BeaconLostTimeout. No output.

Sends command messages 0xA (SetWlanInterfaceUpDown), 0x13 (SetBeaconLostTimeout) and 0x21 (JoinNetworkStaWithWps) to the state machine.

Cmd19

Takes a #MacAddress, 3 u16s, 3 u32s, no output.

This copies the input data into state, and sets a flag in state. The input is written into state with the following structure: #MacAddress, u32[0], u32[1], u16[0], u16[1], u32[2], u16[2].

This data is used during RequestSleep if a state field is set for using it (the codepath using this will throw an error if this data was not set). This data is cleared afterwards regardless of whether it was used. This is used for configuring various config related to wowl/tcpka/etc (wake-on-WLAN/TCP keep-alive). Note that an error is thrown if "wowl_activate" isn't set but sysmodule-side doesn't do so - this seems to be set automatically at some point.

This is used by nifm.

Cmd23

Takes an input u32, no output.

Sends command message 0x38 to the state machine. This is handled by writing the input value into a global flags field. The default value is 0x3 (all flag bits set). These flag bits are checked during the RequestSleep code handling the state for #Cmd19.

This is not used on retail.

Cmd26

No input/output.

This sends a request which sets a global flag.

This flag is eventually checked by code which runs via RequestSleep, and in one case with wlan:dtc cmd19 (also used by requests done by nnMain).

This is not used on retail.

Cmd27

Takes a type-0xA output buffer containing an array of 2-byte entries, returns an output u32 total_out.

This memcpys data from state into the output buffer, clamped to a maximum of 0x40 entries (nifm hard-codes the count to 0x26).

This is used by nifm.

InitializeWlan

No input/output.

Sends command message 0x1 (InitalizeWlanDriver) to the state machine.

FinalizeWlan

No input/output.

Sends command message 0x2 (FinalizeWlanDriver) to the state machine.

Cmd30

Takes an input s32, no output.

The input s32 must be <=0xE10 (3600) and >= -1. The input value is written into state, then this returns 0.

The user-process code using this cmd also has the above bounds check.

This is used by wlan during RequestSleep from the same code using the state set by #Cmd19.

This cmd is used by nifm with a value from state, prior to using RequestSleep.

Cmd38

Takes an input u32 enum, no output.

The input value must be 0-1.

This internally sends a request which is then eventually handled (if the input doesn't match state already + other state fields are valid) by configuring "pm2_sleep_ret_ext" with a global struct selected via the input value. Afterwards another func is called with input value 2.

This is used by nifm.

wlan:lcl

This is "nn::wlan::detail::ILocalManager".

Cmd Name
0 OpenMasterMode
1 CloseMasterMode
2 OpenClientMode
3 CloseClientMode
4 OpenSpectatorMode
5 CloseSpectatorMode
6 GetMacAddress
7 CreateBss
8 DestroyBss
9 StartScan
10 StopScan
11 Connect
12 CancelConnect
13 Join
14 CancelJoin
15 Disconnect
16 SetBeaconLostCount
17 GetSystemEvent
18 GetConnectionStatus
19 GetClientStatus
20 GetBssIndicationEvent
21 GetBssIndicationInfo
22 GetState
23 GetAllowedChannels
24 AddIe
25 DeleteIe
26 PutFrameRaw
27 CancelGetFrame
28 CreateRxEntry
29 DeleteRxEntry
30 AddEthertypeToRxEntry
31 DeleteEthertypeFromRxEntry
32 AddMatchingDataToRxEntry
33 RemoveMatchingDataFromRxEntry
34 GetScanResult
35 PutActionFrameOneShot
36 SetActionFrameWithBeacon
37 CancelActionFrameWithBeacon
38 CreateRxEntryForActionFrame
39 DeleteRxEntryForActionFrame
40 AddSubtypeToRxEntryForActionFrame
41 DeleteSubtypeFromRxEntryForActionFrame
42 CancelGetActionFrame
43 GetRssi
44 SetMaxAssociationNumber
45 [4.0.0+]
46 [4.0.0+]
47 [4.0.0+]
48 [10.0.0+] ([4.0.0-8.1.0])
49 [6.0.0-8.1.0]
50 [6.0.0-8.1.0]
51 [8.0.0-8.1.0]
52 [8.0.0-8.1.0]
49 [13.0.0+]
50 [13.0.0+]
51 [13.0.0+]

[4.0.0+] CreateBss, Connect, and Join now takes an additional 4-bytes of input.

[5.0.0+] GetAllowedChannels now returns a total of 4-bytes of output instead of 0x50, and now takes a type-0xA output buffer.

[9.0.0+] Almost all cmds had input/output changed / cmds moved around (?).

[10.0.0+] Cmd46 now takes a total of 1-byte of input instead of 6-bytes, while cmd47 now takes a total of 6-bytes of input instead of 1-byte.

wlan:lg

This is "nn::wlan::detail::ILocalGetFrame".

Cmd Name
0 GetFrameRaw

wlan:lga

This is "nn::wlan::detail::ILocalGetActionFrame".

Cmd Name
0 GetActionFrame

[5.0.0+] Cmd0 now takes an additional 4-bytes of input, and returns an additional 4-bytes of output.

wlan:sg

This is "nn::wlan::detail::ISocketGetFrame".

Cmd Name
0 GetFrameRaw

wlan:soc

This is "nn::wlan::detail::ISocketManager".

Cmd Name
0 PutFrameRaw
1 CancelGetFrame
2 CreateRxEntry
3 DeleteRxEntry
4 AddEthertypeToRxEntry
5 DeleteEthertypeFromRxEntry
6 GetMacAddress
7 SwitchTsfTimerFunction
8 GetDeltaTimeBetweenSystemAndTsf
9 RegisterSharedMemory
10 UnregisterSharedMemory
11 EnableSharedMemory
12 [6.0.0+]

wlan:dtc

This is "nn::wlan::detail::IDetectManager".

This was added with [6.0.0+].

Cmd Name
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

[7.0.0+] Cmd14 now takes an input u8.

Ssid

This is "nn::wlan::Ssid". This is a 0x22-byte struct.

Offset Size Description
0x0 0x1 Length
0x1 0x20 Ssid
0x21 0x1 Reserved

MacAddress

This is a 0x6-byte struct with 1-byte alignment.

ConnectParam

This is a 0x80-byte struct.

Offset Size Description
0x0 0x22 Ssid
0x22 0x6 Bssid
0x28 0x1
0x29 0x1 Reserved
0x2A 0x2 Channel
0x2C 0x4 PrivacyMode
0x30 0x4 GroupPrivacyMode
0x34 0x4 KeyIdx
0x38 0x40 SecurityKey
0x78 0x4 Reserved
0x7C 0x4 BeaconLostTimeout

ConnectionStatus

This is a 0x3C-byte struct.

Offset Size Description
0x0 0x4 ConnectionState
0x4 0x4
0x8 0x2 Channel
0xA 0x6 Bssid
0x10 0x22 Ssid
0x32 0x2
0x34 0x2
0x36 0x2
0x38 0x2
0x3A 0x2 Reserved

ScanRequest

This is a 0x1B8-byte struct.

Offset Size Description
0x0 0x4 ScanType
0x4 0x2 * 38
0x50 0x1
0x51 0x3 Reserved
0x54 0x4 ChannelScanTime
0x58 0x4 HomeChannelTime
0x5C 0x22 * 10 Array of Ssid
0x1B0 0x1 SsidCount
0x1B1 0x6 Bssid
0x1B7 0x1 Reserved

ScanResult

Offset Size Description
0x0 0x4 ScanBufferCapacity
0x4 0x4 BssInfoSize
0x8 0x4 BssInfoCount
0xC Variable Array of #BssInfo

BssInfo

This is a 0x58-byte struct.

ConnectionState

This is "nn::wlan::ConnectionState".

Value Description
0 None
1 Idle
2 Connected
3 Scanning
4 Connecting
5 CancelingScan
6 Disconnecting

State

Value Description
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

WpsPin

This is a 0x8-byte string.

FwVersion

This is a 0x100-byte string.

System Version Firmware String
[1.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-aoe Version: 7.35.252.58 CRC: f592f3bf Date: Tue 2016-10-04 23:54:54 PDT Ucode Ver: 1020.221 FWID: 01-5ec2fbfd
[2.0.0-2.2.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe Version: 7.35.64.1 CRC: 301f7804 Date: Fri 2017-02-17 01:03:01 PST Ucode Ver: 1020.223 FWID: 01-82d1f902
[3.0.0-3.0.2] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.70 CRC: f3b554fd Date: Thu 2017-05-04 19:04:04 PDT Ucode Ver: 1020.223 FWID: 01-5d27fda5
[4.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.75 (r666384) CRC: 58f59a6f Date: Wed 2017-08-16 22:27:11 PDT Ucode Ver: 1020.223
[5.0.0-5.1.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.78.1.1 (r683984) CRC: 6a10caf9 Date: Wed 2018-02-21 21:43:01 PST Ucode Ver: 1020.223 FWID 01-ae4e196d
[6.0.0-6.2.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.84 (r692035) CRC: 937bcfc9 Date: Tue 2018-06-19 19:36:54 PDT Ucode Ver: 1020.225 FWID 01-71fd007e
[7.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.87 (r708450) CRC: 5f41af12 Date: Thu 2018-10-25 19:11:47 PDT Ucode Ver: 1020.226 FWID 01-377c0939
[8.0.0-8.1.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.90 (r711053) CRC: 30dcf8a5 Date: Thu 2019-02-28 18:12:24 PST Ucode Ver: 1020.226 FWID 01-e691490c
[9.0.0-9.1.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.93 (r717555) CRC: d8363dad Date: Mon 2019-07-01 23:43:14 PDT Ucode Ver: 1020.228 FWID 01-c90a462
[10.0.0-10.1.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.96 (r723441) CRC: f6823c05 Date: Tue 2019-11-19 22:31:29 PST Ucode Ver: 1020.228 FWID 01-a1b7e0a4
[11.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.99 (r725630) CRC: 320007b0 Date: Mon 2020-05-25 19:51:18 PDT Ucode Ver: 1020.228 FWID 01-822b442d
[12.0.0-13.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.104 (r728022) CRC: f0b454ec Date: Wed 2021-02-24 04:39:25 PST Ucode Ver: 1020.228 FWID 01-fbba058
[14.0.0] 4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.108 (c216b7c) CRC: 1be69227 Date: Sun 2021-08-29 19:24:39 PDT Ucode Ver: 1020.228 FWID 01-65333037
  • [2.0.0+] Besides the version update, added "gtkoe" to the string.
  • [3.0.0+] Besides the version update, added "tcpkaoe" to the string.
  • [6.0.0+] Besides the version update, added "clm_4356a3_ntd" to the string.
  • [7.0.0+] Besides the version update, added "noclminc" to the string.
Retrieved from "https://switchbrew.org/w/index.php?title=WLAN_services&oldid=11715"