BTM services

Revision as of 04:11, 4 August 2020 by Yellows8 (talk | contribs)

btm

This is "nn::btm::IBtm".

Support for "nn::btm::*" was added to sdknso with 6.x.

This has max_sessions 6. IPC is handled by 2 threads shared with all services.

These btm services with BLE only allow connecting to devices which have a #GattService with a certain custom UUID present.

Cmd Name
0 GetState
1 GetHostDeviceProperty
2 AcquireDeviceConditionEvent
3 GetDeviceCondition
4 SetBurstMode
5 SetSlotMode
6 [1.0.0-8.1.0] SetBluetoothMode
7 SetWlanMode
8 AcquireDeviceInfoEvent
9 GetDeviceInfo
10 AddDeviceInfo
11 RemoveDeviceInfo
12 IncreaseDeviceInfoOrder
13 LlrNotify
14 EnableRadio
15 DisableRadio
16 HidDisconnect
17 HidSetRetransmissionMode
18 [2.0.0+] AcquireAwakeReqEvent
19 [4.0.0+] AcquireLlrStateEvent
20 [4.0.0+] IsLlrStarted
21 [4.0.0+] EnableSlotSaving
22 [5.0.0+] ProtectDeviceInfo
23 [5.0.0+] AcquireBleScanEvent
24 [5.0.0+] GetBleScanParameterGeneral
25 [5.0.0+] GetBleScanParameterSmartDevice
26 [5.0.0+] StartBleScanForGeneral
27 [5.0.0+] StopBleScanForGeneral
28 [5.0.0+] GetBleScanResultsForGeneral
29 [5.0.0+] StartBleScanForPairedDevice
30 [5.0.0+] StopBleScanForPairedDevice
31 [5.0.0+] StartBleScanForSmartDevice
32 [5.0.0+] StopBleScanForSmartDevice
33 [5.0.0+] GetBleScanResultsForSmartDevice
34 [5.0.0+] AcquireBleConnectionEvent
35 [5.0.0+] BleConnect
36 [5.0.0+] BleOverrideConnection
37 [5.0.0+] BleDisconnect
38 [5.0.0+] BleGetConnectionState
39 [5.0.0+] BleGetGattClientConditionList
40 [5.0.0+] AcquireBlePairingEvent
41 [5.0.0+] BlePairDevice
42 [5.0.0+] BleUnpairDeviceOnBoth
43 [5.1.0+] BleUnpairDevice
44 [5.1.0+] BleGetPairedAddresses
45 [5.1.0+] AcquireBleServiceDiscoveryEvent
46 [5.1.0+] GetGattServices
47 [5.1.0+] GetGattService
48 [5.1.0+] GetGattIncludedServices
49 [5.1.0+] GetBelongingService
50 [5.1.0+] GetGattCharacteristics
51 [5.1.0+] GetGattDescriptors
52 [5.1.0+] AcquireBleMtuConfigEvent
53 [5.1.0+] ConfigureBleMtu
54 [5.1.0+] GetBleMtu
55 [5.1.0+] RegisterBleGattDataPath
56 [5.1.0+] UnregisterBleGattDataPath
57 [5.1.0+] RegisterAppletResourceUserId
58 [5.1.0+] UnregisterAppletResourceUserId
59 [5.1.0+] SetAppletResourceUserId
60 [8.0.0+]
61 [8.0.0+]
62 [9.0.0+]
63 [9.0.0+]
64 [10.0.0+]

[3.0.0+] RegisterSystemEventForConnectedDeviceCondition, RegisterSystemEventForRegisteredDeviceInfo, and cmd18 now returns an output u8.

With [5.1.0+] cmds 24-42 were moved/replaced/etc (input/output changed).

[9.0.0+] Cmd13 now takes 0xC-bytes of input and no output, instead of 0x6-bytes of input.

btm:dbg

This is "nn::btm::IBtmDebug".

This has max_sessions 6. IPC is handled by 2 threads shared with all services.

Cmd Name
0 AcquireDiscoveryEvent
1 StartDiscovery
2 CancelDiscovery
3 GetDeviceProperty
4 CreateBond
5 CancelBond
6 SetTsiMode
7 GeneralTest
8 HidConnect
9 [5.0.0+] GeneralGet
10 [5.1.0+] GetGattClientDisconnectionReason
11 [5.1.0+] GetBleConnectionParameter
12 [5.1.0+] GetBleConnectionParameterRequest

[3.0.0+] RegisterSystemEventForDiscovery now returns an output u8.

btm:sys

This is "nn::btm::IBtmSystem".

This has max_sessions 6. IPC is handled by 2 threads shared with all services.

Cmd Name
0 #GetCore

GetCore

No input, returns an output #IBtmSystemCore.

IBtmSystemCore

This is "nn::btm::IBtmSystemCore".

Cmd Name
0 #StartGamepadPairing
1 #CancelGamepadPairing
2 #ClearGamepadPairingDatabase
3 #GetPairedGamepadCount
4 #EnableRadio
5 #DisableRadio
6 #GetRadioOnOff
7 [3.0.0+] #AcquireRadioEvent
8 [3.0.0+] #AcquireGamepadPairingEvent
9 [3.0.0+] #IsGamepadPairingStarted

StartGamepadPairing

No input/output.

CancelGamepadPairing

No input/output.

ClearGamepadPairingDatabase

No input/output.

GetPairedGamepadCount

No input, returns an output u8.

EnableRadio

No input/output.

DisableRadio

No input/output.

GetRadioOnOff

No input, returns an output bool.

AcquireRadioEvent

No input, returns an output bool and handle.

AcquireGamepadPairingEvent

No input, returns an output bool and handle.

IsGamepadPairingStarted

No input, returns an output bool.

btm:u

This is "nn::btm::IBtmUser".

This was added with [5.0.0+].

This has max_sessions 6. IPC is handled by 2 threads shared with all services.

Cmd Name
0 GetCore

GetCore

No input, returns an output #IBtmUserCore.

IBtmUserCore

This is "nn::btm::IBtmUserCore".

Cmd Name
0 #AcquireBleScanEvent
1 #GetBleScanFilterParameter
2 #GetBleScanFilterParameter2
3 #StartBleScanForGeneral
4 #StopBleScanForGeneral
5 #GetBleScanResultsForGeneral
6 #StartBleScanForPaired
7 #StopBleScanForPaired
8 #StartBleScanForSmartDevice
9 #StopBleScanForSmartDevice
10 #GetBleScanResultsForSmartDevice
17 #AcquireBleConnectionEvent
18 #BleConnect
19 #BleDisconnect
20 #BleGetConnectionState
21 #AcquireBlePairingEvent
22 #BlePairDevice
23 #BleUnPairDevice
24 #BleUnPairDevice2
25 #BleGetPairedDevices
26 #AcquireBleServiceDiscoveryEvent
27 #GetGattServices
28 #GetGattService
29 #GetGattIncludedServices
30 #GetBelongingGattService
31 #GetGattCharacteristics
32 #GetGattDescriptors
33 #AcquireBleMtuConfigEvent
34 #ConfigureBleMtu
35 #GetBleMtu
36 #RegisterBleGattDataPath
37 #UnregisterBleGattDataPath

AcquireBleScanEvent

No input, returns an output u8 and an Event handle with EventClearMode=1.

sdknso will Abort if the output u8 is value 0.

GetBleScanFilterParameter

Takes an input u16, returns a BleAdvertisePacketParameter.

The u16 must be value 0x1 or 0xFFFF.

GetBleScanFilterParameter2

Takes an input u16, returns a GattAttributeUuid.

The u16 must be value 0x2. The first 4-bytes of output is always 0 since it's not set.

StartBleScanForGeneral

Takes a PID, a BleAdvertisePacketParameter, an AppletResourceUserId, no output.

StopBleScanForGeneral

No input/output.

GetBleScanResultsForGeneral

Takes a PID, a type-0x6 output buffer containing an array of BleScanResult, an AppletResourceUserId, returns an output u8 total_out.

The max array entries is 10.

StartBleScanForPaired

Takes a PID, a BleAdvertisePacketParameter, an AppletResourceUserId, no output.

StopBleScanForPaired

No input/output.

StartBleScanForSmartDevice

Takes a PID, a GattAttributeUuid, an AppletResourceUserId, no output.

StopBleScanForSmartDevice

No input/output.

GetBleScanResultsForSmartDevice

Takes a PID, a type-0x6 output buffer containing an array of BleScanResult, an AppletResourceUserId, returns an output u8 total_out.

The max array entries is 10.

AcquireBleConnectionEvent

No input, returns an output u8 and an Event handle with EventClearMode=1.

sdknso will Abort if the output u8 is value 0.

BleConnect

Takes a PID, an Address, an AppletResourceUserId, no output.

An error is thrown if the Address is already connected (listed in the BleConnectionInfo from #BleGetConnectionState). An error is thrown if 4 devices are already connected.

BleDisconnect

Takes an input u32, no output.

The u32 must match an Id in a BleConnectionInfo from #BleGetConnectionState (0xFFFFFFFF is invalid).

BleGetConnectionState

Takes a PID, a type-0xA output buffer containing an array of BleConnectionInfo, an AppletResourceUserId, returns an output u8 total_out.

Other cmds which use this internally use arraycount=4.

AcquireBlePairingEvent

No input, returns an output u8 and an Event handle with EventClearMode=1.

sdknso will Abort if the output u8 is value 0.

BlePairDevice

Takes an input BleAdvertisePacketParameter and an u32, no output.

The u32 is handled the same as #BleDisconnect.

BleUnPairDevice

Takes an input BleAdvertisePacketParameter and an u32, no output.

The u32 is handled the same as #BleDisconnect.

BleUnPairDevice2

Takes an input Address and a BleAdvertisePacketParameter, no output.

BleGetPairedDevices

Takes a type-0xA output buffer containing an array of Address, a BleAdvertisePacketParameter, returns an output u8 total_out.

The max array entries is 10.

AcquireBleServiceDiscoveryEvent

No input, returns an output u8 and an Event handle with EventClearMode=1.

sdknso will Abort if the output u8 is value 0.

GetGattServices

Takes a PID, a type-0x6 output buffer containing an array of #GattService, an u32, an AppletResourceUserId, returns an output u8 total_out.

The u32 is handled the same as #BleDisconnect. The max array entries is 100.

GetGattService

Takes a PID, a type-0x1A output buffer containing a #GattService, an u32, a GattAttributeUuid, an AppletResourceUserId, returns an output u8 total_out.

The u32 is handled the same as #BleDisconnect.

Same as #GetGattServices except this only returns the #GattService which matches the input GattAttributeUuid.

GetGattIncludedServices

Takes a PID, a type-0x6 output buffer containing an array of #GattService, an u16, an u32, an AppletResourceUserId, returns an output u8.

The u32 is handled the same as #BleDisconnect. The max array entries is 100.

Same as #GetGattServices except this only returns #GattService entries where various checks pass with u16 fields.

The param for the output u8 is unused by the sysmodule, hence the output is always 0. However, a sdknso func which calls the nn::btm::* func for this expects this u8 to be set.

GetBelongingGattService

Takes a PID, a type-0x1A output buffer containing a #GattService, an u16, an u32, an AppletResourceUserId, returns an output u8 total_out.

The u32 is handled the same as #BleDisconnect.

This is similar to #GetGattIncludedServices except this only returns 1 #GattService.

GetGattCharacteristics

Takes a PID, a type-0x6 output buffer containing an array of #GattCharacteristic, an u16, an u32, an AppletResourceUserId, returns an output u8 total_out.

The u32 is handled the same as #BleDisconnect. The max array entries is 100.

The u16 controls which #GattCharacteristic entries to return.

GetGattDescriptors

Takes a PID, a type-0x6 output buffer containing an array of #GattDescriptor, an u16, an u32, an AppletResourceUserId, returns an output u8 total_out.

The u32 is handled the same as #BleDisconnect. The max array entries is 100.

The u16 controls which #GattDescriptor entries to return.

AcquireBleMtuConfigEvent

No input, returns an output u8 and an Event handle with EventClearMode=1.

sdknso will Abort if the output u8 is value 0.

ConfigureBleMtu

Takes a PID, an u16, an u32, an AppletResourceUserId, no output.

The u32 is handled the same as #BleDisconnect.

sdknso will Abort if the user-specified u16 is <0x18 or >0x200.

GetBleMtu

Takes a PID, an u32, an AppletResourceUserId, returns an output u16.

The u32 is handled the same as #BleDisconnect.

RegisterBleGattDataPath

Takes a PID, a #BleDataPath, an AppletResourceUserId, no output.

UnregisterBleGattDataPath

Takes a PID, a #BleDataPath, an AppletResourceUserId, no output.

GattService

This is "nn::btm::user::GattService". This is a 0x24-byte struct.

Offset Size Description
0x0 0x4
0x4 0x14 GattAttributeUuid
0x18 0x2
0x1A 0x4
0x1E 0x2
0x20 0x1
0x21 0x3 Padding

GattCharacteristic

This is "nn::btm::user::GattCharacteristic". This is a 0x24-byte struct.

GattDescriptor

This is "nn::btm::user::GattDescriptor". This is a 0x20-byte struct.

BleDataPath

This is "nn::btm::user::BleDataPath". This is a 0x18-byte struct with 4-byte alignment.

Offset Size Description
0x0 0x1
0x1 0x3 Padding
0x4 0x14 GattAttributeUuid